Duplex LC Cables

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable is for use in 100 Gigabit Ethernet and fiber-channel applications.Cable Length ( ft.): 164 ft..This cable is Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

Tripp lite duplex multimode OM3 LSZH fiber patch cable is designed to deliver fast and clear signal transmission throughout your network application. It is suitable for 10Gb Ethernet applications..13' Duplex Multimode Fiber Patch Cable.2x LC male to 2x LC male network connector.A patch cable for PC connection.10Gbps Ethernet speed.Ideal for Fiber Channel (SAN) applications

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 82ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Flame Retardant, EMI Protection, Bend Insensitive, Bend Resistant, Laser-optimized, Molded, Strain Relief, Passive.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

Compared to conventional twisted-pair copper cable, this LC-LC OM4 AddOn® 9.84' aqua fiber optic patch cable offers higher speeds and increased bandwidth. Multi-mode, LC/LC OM4 cable is suitable for use with 10GB Ethernet applications. The low smoke zero halogen jackets protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It is specifically designed for Ethernet, multimedia or communication applications. The patch cable provides backward compatibility with existing 50/125 um equipment..Laser optimized multi-mode fiber patch cable is specifically designed for Ethernet, multimedia, or communication applications.9.84' long for easy installation.Two LC male x two LC male connector provides the necessary connection between fiber networking devices.Designed for use with 10GB applications.Low smoke zero halogen jacket provides protection against toxic and corrosive gases in badly ventilated spaces and other most crucial areas.Meets RoHS, Green compliance and OM4 certified.Patch cable with fiber core/cladding diameter of 50/125 um has UPC termination to ensure secure connection.Laser optimized multimode fiber is built for speed and supports network device.Comes in aqua color.Duplex fiber optic cable offers simultaneous, bidirectional data transfer.Well suited for LANs or SANs and used for connection between fiber patch panels, hubs, switches, media converters and routers, etc.Provides fire protection needed to run within walls and air plenums eliminating the need for conduits.Offers higher speeds and increased bandwidth compared to conventional twisted pair copper cable.Comes with lifetime warranty.The AddOn® LC-LC OM4 9.84' aqua fiber optic patch cable offers fire protection needed to run within walls and air plenums terminating the need for conduits.

The Tripp Lite 33' yellow duplex single-mode fiber optic patch cable features two LC male connectors on both ends for enhanced connectivity. This cable with PVC jacket has beveled edge on ends of glass to make insertion of plug with ease. The patch cable has 8.3/125 um core/cladding dia..Fiber Optic Duplex Patch cable.Features: Zipped.33' Cable.Core / Cladding Diameter: 8.3 / 125 micron.2x LC male to 2x LC Male.Yellow with blue tipped LC connectors.Fiber made from glass (not a polymer).Attenuation loss meets or exceeds the latest industry standards.Twice the bandwidth throughput of multimode cable.Comes with lifetime limited warranty

This Tripp Lite 10-foot aqua duplex fiber optic patch cable is the perfect solution for networks that require instant and clear signal transmission. This multimode optic patch cable has two LC male connectors on both ends. This cable, featuring top-quality glass construction, is perfect for high-density, demanding network applications. The connector has beveled and color-coded edges for easy and secure connection throughout the network. This cable has a 10Gb 50/125 duplex fiber, sturdy connectors and a zero halogen jacket for long-lasting durability and better use. It is perfect for use with VCSEL and LED laser light sources..LSZH Fiber Patch Cable (LC/LC).Aqua.3M (10-ft.)

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 65.6ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

Connect fiber network devices for high-speed transfers with LSZH rated cable. The SMFIBLCSC1 1m LC to SC Single-Mode Duplex Fiber Cable features 9/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex single-mode applications. This LC-SC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire - an ideal solution for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration. Each Duplex 9/125 (OS1) Single-Mode Fiber Patch Cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability, and is backed by our lifetime warranty..Guaranteed reliability.Suitable for installations under restrictive building codes, with LSZH rating.Cable Length: 3.28 ft

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.26.2ft fiber optic cable for longer distance application.This fiber optic cable features Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, and Bend Resistance.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single Mode OS2 Fiber Cable is optimized for 100G Networks; Ideal for connecting between servers/switches and data center equipment.131 ft. cable for long distance application.This cable is Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.16.4 ft. cable for longer distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 Single Mode Duplex Fiber Optic Cable; Duplex fiber optic cable offers simultaneous, bidirectional data transfer.9.84 ft. fiber optic cable for high-speed, low-latency connections.This cable enables safer cable installations in areas with poor ventilation and is safe to use in any application. It features Ultra Physical Contact (UPC), Bend Insensitivity, Flame Retardant, Bend Resistance and EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.32.8 ft. cable for longer distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.3.28 ft. cable for short distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty

Tripp Lite 10Gb Duplex Multimode 50/125 OM320.LSZH Fiber Patch Cable.(LC/LC) - Aqua.10M (33-ft.)

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.9.48 ft. for short distance application.This cable is Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty.This 9/125µm Single Mode fiber cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data center equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

Tripp Lite 10Gb Duplex Multimode 50/125 OM325.LSZH Fiber Patch Cable (LC/LC).Aqua.1M (3-ft.).Network Cable

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 6.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 26.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 16.4'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech.com® 50/125 micrometer Duplex multimode fiber optic cable is 16.4' long and is suitable for high performance patch and fiber data distribution systems. Transmits data at a speed of 10 Gb/s. Cable has male LC network connectors on the first and second end for providing smooth connection between fiber networking devices. Aqua cord durable cable design is suitable for high bandwidth data transmissions over 10 gigabit Ethernet and fiber channel network. Perfect solution for fiber cable that runs between multiple backbone switches, hubs, routers and higher end networking equipment. Molded connector cable has flame retardant low smoke zero halogen jacket for optimal insulation and ensures minimal smoke, toxicity as well as corrosion when exposed to high sources of heat..Fiber optic cable is suitable for long-distance networks with mission critical data and broadband systems.A convenient length of 16.4' for ease of installation.Features 2 x LC male at first end and 2 x LC male at second end connectors for secure data transmission.Recommended for maximum data transfer rate of 10 Gb/s.Utilizes copper conductors with a LSZH jacket for optimum installation.StarTech.com® A50FBLCLC5 16.4' Aqua network cable with LC male connectivity on both ends allow you to quickly transfer data. Supports data transfer speed rate of up to 10 Gb/s.

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 49.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 32.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 9.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 65.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 19.7'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length: 3.3'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 22.9'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

The Tripp Lite 1 m aqua duplex multimode 50/125 OM4 LSZH fiber patch cable is ideal for fiber channel SAN applications. It offers 40/100 Gigabit Ethernet speeds up to 300 m. It has sturdy dual LC male connectors at both ends to ensure fast, clear signal transmission with less insertion loss. It has a low-smoke, zero-halogen jacket for durability. This versatile cable is backward compatible with existing 50/125 fibers. It is suitable for LANs, SANs and high-speed parallel interconnects. It meets current IEEE 802.3ae and TIA LOMMF standards..Type: Patch cable - OM4.Technology: Fiber optic.Type of Fiber Optics: Multimode.Features: Laser-optimized multimode fiber (LOMMF).Length: 3.3 ft.Core / Cladding Diameter: 50 / 125 micron.Connectors: 2 x LC multi-mode - male.Connectors (Other Side): 2 x LC multi-mode - male.Color: Aqua.Manufacturer Warranty: Limited lifetime warranty.Comes with lifetime limited warranty.40/100 Gb/s Ethernet speed up to 300 m (at 850 nm) for communication.Has nearly three times the bandwidth of conventional 62.5 um multimode fiber.Commonly used with VCSEL and LED laser light sources