Duplex LC Cables

Aqua.Fiber optic LC Male/LC Male.Designed for use in 10-gigabit Ethernet applications

Includes 10' duplex MMF cable LC/LC 62.5/125 fiber cable..Orange.Fiber optic LC male/LC male.Duplex multimode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket, glass fiber.Applications: Computer networking (fiber).System requirements: Any fiber optic hardware or NIC card requiring multimode Duplex cable with SC/LC connectors.Core/cladding diameter: 62.5/125 micron m.Fiber optic mode: Multimode.Network speed: 1 Gbps.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.color-coded shrouds identify transmit and receive.Compliant and standards: FDDI and OFNR.Warranty: Lifetime limited

Duplex patch cable..Aqua.Fiber optic LC male/LC male.Backward compatible with legacy LAN's.10'.Device supported: Network device.Applications: For use with 40/100 gigabit ethernet equipment.Jacket type: LSZH.Core/cladding diameter: 50/125 microm.Fiber optic mode: Laser-optimized multimode fiber (LOMMF).Network speed: 10 Gbps / 40 Gbps / 100 Gbps.40/100Gb ethernet speed to 300 meters at 850 nm.Includes 10' duplex multimode 50/125 aqua OM4 fiber patch cable, LC/LC.Compliant and standards: OM4 rated, TIA LOMMF and RoHS compliant.Warranty: Lifetime limited

Fiber optic patch cable..Yellow.Fiber optic LC male/LC male.Duplex multimode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket, glass fiber.Applications: Networking equipment that requires single mode fiber optic patch cables

Aqua fiber optic LC male/LC male duplex patch cable is backward compatible with legacy LAN's..16'.Applications: For use with 10-gigabit ethernet equipment.Core/cladding diameter: 50/125 microm.Dimensions: 2"H x 4"W.Beep: Indicates volume level, microphone mute and others.Sound: Mic noise canceling, sixth generation echo cancellation, tone control, crystal clear sound and voice (DSP).Talk time: 21 hrs, 500 hrs stand by time, 300 mAh battery

StarTech FIBLCLC3 3m Multimode 62.5/125 Duplex Fiber Patch Cable LC to LC.Can maximize wiring conduit usage while minimizing installation problems.Fiber optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high- speed data transmission.Cool/no heat so it doesn't destroy heat-sensitive papers.No warm-up or waiting, no odors.portable and compact for desktop operation, weighs only 8 1/2 lbs..Easy-to-use for goof-proof operation.Refills quickly with Scotch® refill cartridges.18-foot dual-laminate starter cartridge included.White.Max pouch thickness: Up to 9.2 mil.Throat width: 8 1/2".Laminating style: Cold.Perfect lamination without electricity.Safe, heat-free and easy to use, with no warm-up waiting time, no fumes and no mess.Ideal for posters, banners, artwork, signs, menus, maps and more.Fully compatible with inkjet, thermal and other sensitive papers.For documents up to 8 1/2" wide, 1/10" thick and 90-ft.long.Features easy-loading cartridge, adjustable input tray

AddOn 15m LOMM OM4 fiber optic male LC/LC duplex patch cable in aqua color features low-smoke zero-halogen jacket that protects from toxic and corrosive gases. Cable is recommended for connection between fiber patch panels, hubs and switches..LC Male.Suited for shorter reach data center LAN's or SAN's, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc.15m.40Gb Ethernet, multimedia, or communication applications, and provides extended bandwidth over OM3 cable.Connector on first end: 2 x LC male network.Connector on second end: 2 x LC male network.Fiber optic: Fiber optic, cable characteristic: Patch cable, fiber optic mode: Multi-mode, core/cladding diameter: 50/125 micro meter, device supported: Network device.Aqua.Device supported: Network device.High-quality LOMM (50/125) patch cable is specifically designed for 40Gb Ethernet, multimedia, or communication applications, and provides extended bandwidth over OM3 cable.High bandwidth provided by OM4 fiber provides extra headroom for channel insertion loss.100% RoHS compliant for all of your networking needs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.It is designed to enhance the system cost benefits enabled by 850 nm Vertical Cavity Surface Emitting Lasers for existing 1 and 10 Gb/s applications, as well as future 40 and 100 Gb/s systems. when used at less than rated distance environments.Warranty: Lifetime limited.AddOn 15m LOMM OM4 fiber optic male LC/LC duplex patch cable in aqua color offers backward compatibility with existing 50/125 equipment and provides the fire protection needed to run within walls.

Tripp Lite Duplex singlemode fiber patch cable has beveled edge on ends of glass that makes insertion of plug a breeze and color coded to identify transmit or receive. Cable has insertion loss testing performed on connector and provided with cable..Fiber optic.Beveled edge on ends of glass makes insertion of plug a breeze.3.28'.Yellow.Material: Polyvinyl chloride PVC jacket.Connections: 2 x LC male to 2 x LC male.Core/cladding diameter: 9/125 microm.Applications: Networking equipment that requires singlemode fiber optic patch cables.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/LC connectors.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Fiber made from glass.Color coded shrouds identify transmit and receive.Fiber optic distributed data interface (FDDI) rated.Includes 3' duplex singlemode fiber patch cable, LC/LC.Certifications and standards: FDDI, OFNR.Warranty: Lifetime limited.Tripp Lite Duplex singlemode 8.3/125 fiber patch cable measuring 3' is made of durable glass and provides twice bandwidth throughput of multimode.

The AddOn® ADD-LC-LC-5M5OM3 LC-to-LC male/male OM3 duplex fiber optic patch cable in aqua, is suitable for use with 10 Gb Ethernet applications. This cable measuring 5 m uses 850 nm vertical cavity surface emitting laser and it supports 2000 MHz/km effective modal bandwidth at 850nm. The laser optimized multi-mode fiber cable has low smoke zero halogen jacket, which provides protection from toxic and corrosive gases in badly ventilated spaces. This patch cable is backward compatible with existing 50/125 equipment, The cable is perfect for use with LANs or SANs and for connecting fiber patch panels, hubs, switches, media converters and routers..Patch cable for LANs or SANs and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Cable length: 5 m.Connections: 2 x LC male to 2 x LC male.Wired connectivity.Material: LSZH (jacket), conductor: Copper.Network: Gigabit Ethernet.Fiber type: LOMM.Core/cladding diameter: 50/125 um.Compatible with M7100 - 24X managed switch - (XSM7224-v1h1).Standard: OM3.It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduits.They provide higher speeds and increased bandwidth compared to conventional twisted-pair copper cable.Comes with limited lifetime warranty.Aqua 5 m fiber optic patch cable with LC connectors and low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.

This 2m LC/SC Duplex 50/125 Multimode Fiber Patch Cable provides a reliable connection between networking devices for high-speed long distance networks; tested/certified to be within acceptable optical insertion loss limits. Lifetime Warranty..Can maximize wiring conduit usage while minimizing installation problems.Fiber Optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high-speed data transmission.Backed by StarTech.com lifetime warranty.Connectors offer greater durability in resisting pulls, strains, and impacts during cable installation and maintentance.Immune to electricty interference.Attenuation loss meets or exceeds industry standards

Tripp Lite® 2 m Duplex multimode fiber optic patch cable in in aqua color has LC male/male connectors on first and second end. Economical cable features high-speed, high-bandwidth and is used with VCSEL, LED laser light sources..Aqua.Cable type: Fiber optic.Cable length: 2m.Material: Low smoke zero halogen (LSZH) - jacket.Connector details: 2 x LC male IEEE 802.3ae network on first and second end.Fiber optic mode: Multi-mode.Features: Laser-optimized multimode fiber (LOMMF), high speed, high bandwidth, low-cost.Core/cladding diameter: 50/125 micrometer, backward compatible with legacy LAN's, Network speed: 10Gbps/40Gbps/100Gbps.Application: Computer networking.LOMMF cable allows 10Gb serial transmission over extended distances in the 850nm wavelength window, where low-cost Vertical Cavity Surface Emitting Lasers (VCSELs) enable a cost-effective, high bandwidth solution.Use with VCSEL and LED laser light sources and ideal for fibre channel (SAN) applications.Certification and Standards: OM4 rated, TIA LOMMF compliant, RoHS.Warranty: Lifetime limited.Tripp Lite® 2 m Duplex multimode fiber patch cable in aqua color has LC male/male connectors and is used for fiber channel applications.

AddOn® 13.12' Multi-mode fiber patch cable in aqua color is ideally designed for ethernet, multimedia or communication applications. Cable offers higher speeds, increased bandwidth and 10GB transfers up to 300 m utilizing an 850 nm VCSEL source..Cable type/connection type: Fiber optic.Patch cable is suited for LAN's or SAN's, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc.Cable length: 13.12'.Aqua.Connector on first end: 2 x LC male network, Connector on second end: 2 x LC male network.Core/cladding diameter: 50/125 um.Fiber optic mode: Multi-mode.Features: Halogen-free, laser-optimized multimode fiber (LOMMF).High quality LOMM (50/125) patch cable is specifically designed for ethernet, multimedia, or communication applications, and is intended for use with 10Gb applications.Low-smoke zero-halogen jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduit.Patch cables are 100% compliant for all of our networking needs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.Each cable is 100% optically tested for insertion loss before you take ownership.Provides 10 gigabit transfers up to 300 meters utilizing an 850nm VCSEL source.Optical multimode 4 (OM4) fiber supports 2000 MHz/km EMB at 850 nm.Warranty: Lifetime limited.AddOn® 4m fiber duplex LC/LC patch cable is specifically designed for ethernet, multimedia or communication applications and is intended for use with 10 Gb applications.

Tripp Lite 2M Fiber optic duplex patch cable in aqua color allows serial transmission over extended distances in 850 nm wavelength window. Cable features high-speed parallel interconnects for head-ends, central offices and data centers..Aqua.Fiber optic LC Male/LC Male.Ideal for fiber-channel (SAN) applications.6'.Applications: Computer networking (fiber).Core/cladding diameter: 50/125 microm.Tripp Lite 2M Fiber optic duplex patch cable in aqua color is designed to use with 10GB Ethernet applications and has zero halogen aqua jackets.

Tripp Lite 50/125 micrometer Duplex multi-mode fiber optic patch cable is 33' long and with two conductors is suitable for high performance patch and fiber data distribution systems. Superior quality construction ensures error-free signal transfer. Cable features LC male IEEE 802.3ae network connector at both the ends for efficient connectivity. Cable allows 40/100Gb serial transmission over extended distances in the 850nm wavelength window. Low-smoke zero-halogen jacket in attractive aqua color limits the amount of toxic smoke emitted from combustion and perfect for poorly ventilated areas. Optic cable is suitable for fiber channel applications..Fiber optic cable is suitable for fiber channel (SAN) applications and is perfect to use with VCSEL and LED laser light sources.A convenient length of 33' for ease of installation.Features 2 x LC male first end and 2 x LC male second end connectors for secure data transmission.Recommended for 40/100-Gig ethernet applications.Utilizes LSZH jacket for optimum installation.Compatible to use with PC.Comes in aqua color for a new look.Contains a core/cladding diameter of 50/125 micron for easy connectivity.Uses fiber optic cable for high-speed data transmission.Renders patch cable used to connect your head-ends, central offices and data centers.Consist of 10 meter ( 33ft ) duplex multimode 50/125 aqua OM4 fiber patch cable, LC/LC connectors for secured connectivity.Meets OM4 rated, TIA LOMMF, IEEE 802.3ae, RoHS compliant standards.Comes with limited lifetime warranty.Tripp Lite 33' Aqua fiber optic patch cable with LC male connectivity designed for 40/100-Gb Ethernet applications. Use with VCSEL and LED laser light sources.

The AddOn 32.8' laser optimized multi-mode fiber duplex LC/LC OM4 aqua patch cable is perfect for use with 10GB Ethernet applications. It offers connections between fiber patch panels, hubs, switches, media converters, routers and more. It features a low smoke zero halogen jacket to protect from toxic and corrosive gases. This patch cable works for LANs or SANs and renders high speed and increased bandwidth..Laser optimized multi mode fiber duplex OM4 patch cable is suitable for Ethernet, multimedia or communication applications.Cable length: 32.8'.Connections: two LC male network on both ends.Low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces.RoHS and green compliant.Core/cladding diameter: 50/125 u m.Comes in aqua color.Fiber termination: Ultra physical contact (UPC).Suitable for use with UCS C460 M4 rack mount server with DDR3, DDR4 memory.Offers the fire protection needed to run within walls.Perfect for LANs or SANs, recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Comes with lifetime warranty

The AddOn® 9.8' laser-optimized OM3 patch cable in aqua, has multi-mode fiber duplex two SC male connectors on first end and two LC male connectors on second end. With low smoke zero halogen jacket, this patch cable offers protection against toxic and corrosive gases in badly ventilated spaces. Featuring 50/125 OHMm core/cladding thickness, this patch cable ensures high performance. It is suitable for use with 10Gb Ethernet applications. The patch cable offers the fire protection needed to run within walls and air plenums, while eliminating the need for conduits..Patch cable for use with 10GB Ethernet applications and it is suited for LANs or SANs.Cable length: 9.8'.Multi-mode fiber (LOMM) duplex two SC male connectors on first end and two LC male connectors on second end.Jacket: Low smoke zero halogen (LSZH).Color: Aqua.Core/cladding: 50/125 OHMm, Standard: OM3.Jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduits.Offers higher speeds and increased bandwidth compared to conventional twisted-pair copper cable.Comes with lifetime limited warranty

StarTech.com® 50/125 micrometer Duplex multimode fiber optic cable is 3.28' long and is suitable for high performance patch and fiber data distribution systems. Transmits data at a speed of 10 Gb/s. Cable has male LC network connectors on the first and second end for providing smooth connection between fiber networking devices. Aqua cord cable is suitable for high bandwidth data transmissions over 10 gigabit Ethernet and fiber channel network. Perfect solution for fiber cable that runs between multiple backbone switches, hubs, routers and higher end networking equipment. Molded connector cable has flame retardant low smoke zero halogen jacket for optimal insulation and ensures minimal smoke, toxicity as well as corrosion when exposed to high sources of heat. Compatible with 850nm VCSEL source..Fiber optic cable is suitable for data applications requiring high speed data transmission.A convenient length of 3.28' for ease of installation.Features 2 x LC male network first end and 2 x LC male network second end connectors for secure data transmission.StarTech.com® A50FBLCLC1 3.28' Aqua laser-optimized network cable with LC male connectivity allows you to quickly transfer data. Supports data transfer speed rate of up to 10 Gb/s.

StarTech Multimode 62.5/125 Duplex Fiber Patch Cable LC LC Network Cable 3.3 Ft Orange.Type: Network cable.Technology: Fiber optic.Type of Fiber Optics: Multimode.Features: Riser.Length: 3.3 ft.Core / Cladding Diameter: 62.5 / 125 micron.Connectors: 2 x LC multi-mode, male.Connectors (Other Side): 2 x LC multi-mode, male.Color: Orange.Manufacturer Warranty: Limited lifetime warranty.Multimode duplex fiber optic network cable provide connection between fiber networking devices for high-speed, long distance networks.

Startech® 6.56' LC To LC Multimode 50/125 Duplex LSZH Fiber Patch Cable, Aqua.Fiber optic cable is suitable for data applications requiring high speed data transmission.A convenient length of 6.56' for ease of installation.Features 2 x LC male network first end and 2 x LC male network second end connectors for secure data transmission.StarTech.com® A50FBLCLC2 6.56' Aqua laser-optimized network cable with LC male connectivity allows you to quickly transfer data. Supports data transfer speed rate of up to 10 Gb/s.

This is a 2m single-mode fiber (SMF) duplex SC/LC OS1 yellow patch cable. This high quality SMF (9/125) patch cable is specifically designed for ethernet, multimedia, or communication applications, and is intended for use with 10Gb applications. This patch cable is suited for LANs or SANs, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc. The low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduits. The injection molding process provides each connection greater durability in resisting pulls, strains, and impacts from cabling installs. They provide higher speeds and increased bandwidth compared to conventional twisted-pair copper cable. Each cable is 100% optically tested for insertion loss before you take ownership. Our patch cables are 100% compliant for all of your networking needs. Our products are guaranteed by federal law to not affect or void OEM warranties..Yellow Duplex LC (Male) to SC (Male) cabling to provide reliable connectivity.2.0m (6.6ft) in length to fit the needs of your application.Complies with all multi-source agreement (MSA) standards to ensure seamless network integration.Application and environment tested and guaranteed to work.Limited Lifetime Warranty.2m LC (Male) to SC (Male) Yellow OS1 Duplex LSZH Single-Mode Fiber (SMF) Patch Cable

Ideal solution for data applications requiring high speed data transmission and fiber connections in patch panels, hubs, switches, and routers..Aqua.Fiber optic/2 x LC male network first and second end.Use in gigabit Ethernet and fiber channel applications.9.84'.Type: Singlemode, Technology: Fiber optic.Core/cladding diameter: 50/125 micron.Jacket type: LSZH rated (low smoke zero halogen).Attenuation loss meets or exceeds industry standards.Molded connectors.Certifications and standards: RoHS.Weight: 1.6 oz..Warranty: Lifetime limited

Made from 50/125 zip cord fiber, the Tripp Lite Patch Cable features thoroughly tested dual LC connectors at each end which have minimum insertion loss. It is backwards compatible with 6.2 micron fiber and is equipped with built-in headroom for future applications. The cable is optimized for higher Gigabit and 10 Gbps networks with higher bandwidth capabilities. Beveled edges of the adapter are color coded for an easy and secure connection throughout your network..LCM/LCM fiber optic patch cable for efficient and high speed data transmission.Dual LC Male connectors for greater compatibility.Made from glass graded index fiber for minimum signal loss.OFNR rated PVC Jacket ensures durability.Compliance Standards: RoHS qualified.Comes with a limited lifetime warranty.The orange Tripp Lite 10' Duplex Fiber Optic LCM/LCM Patch Cable is optimized for high data transfer speeds of 1 Gbps making it a great choice for data centers and network applications.

The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 10gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Ideal for high-speed fiber optic connections in data centers and enterprise networks, ensuring seamless LC-to-LC interface integration.Compact 1.64ft length for clean, clutter-free installations in tight spaces.Features LC male connector on both ends for secure and precise connectivity.Built with OM3 multimode fiber for superior bandwidth, protected by a durable LSZH jacket, and finished in a vibrant turquoise color for easy identification.Supports up to 10Gbps high-speed data transfer, making it perfect for demanding networking and storage applications.Compatible with LC interface devices, fiber optic transceivers, and OM3-compliant networking hardware.2 Years Manufacturer's Warranty

Patch cable..Orange.Fiber optic LC Male/ST Male.Beveled edge on ends of glass makes insertion of plug a breeze.3'.Material: Polyvinyl Chloride (PVC) - jacket.Applications: Computer networking (fiber).Jacket type: Plenum.System requirements: Any fiber optic hardware or NIC card requiring multimode duplex cable with ST/LC connectors.Diameter: 125 micrometer clad, 62.5 micrometer core.Fiber type: 62.5/125 - OM1 all glass graded index.Network speed: 1Gbps.color-coded shrouds identify transmit and receive.Fiber made from glass (not a polymer).Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes 1 meter duplex MMF LC/ST 62.5/125 fiber cable, duplex fiber optic patch cable.Compliant and standards: FDDI, OFNR, RoHS.Warranty: Lifetime limited

Ideal solution for data applications requiring high speed data transmission and fiber connections in patch panels, hubs, switches, and routers..Yellow.Fiber optic/2 x LC male network first and second end.Use in gigabit Ethernet and fiber channel applications.3.28'.Type: Singlemode, Technology: Fiber optic.Core/cladding diameter: 9/125 micron.Jacket type: LSZH rated (low smoke zero halogen).Attenuation loss meets or exceeds industry standards.Molded connectors.Certifications and standards: RoHS.Weight: 0.7 oz..Warranty: Lifetime limited.Warranty: Lifetime limited

Tripp Lite 1M Fiber optic duplex 62.5/125 patch cable has connector edges which are beveled and color coded for easy or secure connection throughout your network. Cable has LC connectors on each end, a PVC jacket and is FDDI and OFNR rated..Orange.Fiber optic LC Male/LC Male.Duplex multimode fiber is most commonly used in LAN applications where links are 10 feet or less.3'.Material: Polyvinyl Chloride (PVC) - jacket.Applications: Computer networking (fiber).System requirements: Any fiber optic hardware or NIC card requiring multimode duplex cable with LC connectors.Diameter: 125 micrometer clad, 62.5 micrometer core.Fiber type: 62.5/125 - OM1 all glass graded index.Network speed: 1Gbps.color-coded shrouds identify transmit and receive.Beveled edge on ends of glass makes insertion of plug a breeze.Fiber made from glass (not a polymer).Includes 1M duplex MMF cable LC/LC 62.5/125 micron fiber, fiber optic duplex patch cable(Riser).Compliant and standards: FDDI, OFNR, ROHS.Warranty: Lifetime limited

Patch cable..Yellow.Fiber optic LC Male/SC Male.Duplex single mode fiber is most commonly used in LAN applications.16'.Material: Polyvinyl Chloride (PVC) - jacket.Applications: Networking equipment that requires single mode fiber optic patch cables.Jacket type: Plenum.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SC connectors.Diameter: 125 micron clad, 8.3 micron core.Number of fibers: 2.color-coded shrouds identify transmit and receive.Beveled edge on ends of glass makes insertion of plug a breeze.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes 5M duplex single mode fiber patch cable, LC/SC, duplex fiber optic patch cable.Compliant and standards: FDDI, OFNR.Warranty: Lifetime limited

StarTech FIBLCST3 3m Multimode 62.5/125 Duplex Fiber Patch Cable LC-ST.Fiber optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high- speed data transmission.Attenuation loss meets or exceeds industry standards.Backed by StarTech.com lifetime warranty.Attenuation loss meets or exceeds industry standards

AddOn 6.5' Optic patch cable comes with low smoke zero halogen jacket and supports network devices. Cable with 2 x LC male connectors on both sides provides higher speeds with increased bandwidth and is ideal for LAN or SAN connectivity..2 x LC male/2 x LC male.Molded.Cable Length: 6.5'.Jacket material: Low smoke zero halogen.Cable type: Fiber optic.Yellow.Device supported: Network device.Core/Cladding diameter: 9/125 micrometer.Fiber optic mode: Single-mode.Fiber Qty: 2.Specifically designed for ethernet, multimedia, or communication applications is intended for use with 10Gb applications.Suited for LAN's or SAN's is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Low-smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduit.Injection molding process provides each connection greater durability in resisting pulls, strains, and impacts from cabling installs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.100% optically tested for insertion loss.Warranty: 3 years limited.AddOn 6.5' Optic patch cable in yellow color adds perfect choice for ethernet, multimedia or communication and 10GB applications and offers fire protection.

Patch cable..Yellow.Fiber optic LC Male/SC Male.Duplex single mode fiber is most commonly used in LAN applications.3'.Material: Polyvinyl Chloride (PVC) - jacket.Applications: Networking equipment that requires single mode fiber optic patch cables.Jacket type: Plenum.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SC connectors.Diameter: 125 micron clad, 8.3 micron core.Number of fibers: 2.color-coded shrouds identify transmit and receive.Beveled edge on ends of glass makes insertion of plug a breeze.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes 1M duplex single mode fiber patch cable, LC/SC, duplex fiber optic patch cable.Compliant and standards: FDDI, OFNR.Warranty: Lifetime limited

The AddOn® ADD-LC-LC-1M6MMF LC-to-LC male/male OM1 duplex fiber optic patch cable in orange, is suitable for use with Ethernet, multimedia, communication applications and with 1 Gb applications. This 1 m cable provides higher speeds and increased bandwidth. The multi-mode fiber cable has low smoke zero halogen jacket that provides protection from toxic and corrosive gases in badly ventilated spaces. This cable is perfect for LANs or SANs and for connecting fiber patch panels, hubs, switches, media converters and routers..Patch cable for LANs or SANs and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Cable length: 1 m.Connections: 2 x LC male to 2 x LC male.Wired connectivity.Material: LSZH (jacket), conductor: Copper.Network: Gigabit Ethernet.Fiber type: MMF.Core/cladding diameter: 62.5/125 um.Standard: OM1.Comes with limited lifetime warranty.Orange 1 m fiber optic patch cable with LC to LC connectors and low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.

The cable features a Low Smoke Zero Halogen (LSZH) jacket, ensuring safer usage in environments where smoke and toxic emissions are a concern. Equipped with dual LC multi-mode connectors, this cable offers compatibility with various devices, enhancing overall network performance. With a core/cladding diameter of 50/125 microns, this patch cable supports high bandwidth applications, making it suitable for demanding network environments. This product adheres to C-ETL and ETL standards, ensuring it meets rigorous safety and performance benchmarks for fiber optic cables. This cable operates in duplex mode, allowing for simultaneous transmission and reception of data, maximizing network efficiency..Designed for high-speed fiber optic connectivity in data centers, enterprise networks, and storage systems, ensuring reliable performance for mission-critical applications.Generous 6.6ft (2m) length provides flexibility for medium-distance connections without compromising signal quality.LC to LC connectors deliver secure, precise, and low-loss optical signal transmission for maximum efficiency.Built with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable LSZH jacket and a turquoise finish for easy identification in complex setups.Supports high-bandwidth applications including 40G/100G Ethernet, ensuring lightning-fast data transfer for demanding workloads.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, guaranteeing quality and reliability.2 Years Manufacturer's Warranty

The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 10gigabit applications at the same time being backward compatible with 50/125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The ALOGIC OM3 Patch Cables are available in various lengths starting from 0.5m to 100m length.Designed for high-speed data transmission in fiber optic networks, ideal for connecting servers, switches, and storage devices in data centers or enterprise environments.The cable measures 6.6ft, providing flexibility for medium-distance connections without signal loss.Features LC to LC connectors with precision alignment for secure and reliable optical signal transfer.Constructed with OM3 multimode fiber for 10Gbps performance, LSZH jacket for durability, and finished in a turquoise color for easy identification.Supports high-bandwidth applications up to 10 Gigabit Ethernet, ensuring fast and efficient data transfer.Compatible with all OM3-rated fiber optic equipment, including transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling systems.2 Years Manufacturer's Warranty

Provide a high-performance link between fiber network devices - Duplex Fiber Cable / LC to ST / Multimode Patch Cable - 1m Multimode 62.5/125 Duplex Fiber Patch Cable LC to ST - Ideal solution for data applications requiring high speed data transmission - Guaranteed reliability with a lifetime warranty.Fiber Optic cables are an ultimate solution for high- speed data transmission.Fiber optic cables provide a higher quality signal over a greater distance.Backed by StarTech.com lifetime warranty.Attenuation loss meets or exceeds industry standards

Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment. This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration. Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability. The 450FBLCLC1 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF)

The Tripp Lite 50' aqua OM4 duplex fibre optic patch cable is the perfect solution for networks that require instant and clear signal transmission. This multimode optic patch cable has two LC male connectors on both ends. Featuring a low-smoke, zero halogen (LSZH) jacket, this optic cable maintains integrity, even when bent with abrasion-resistant. The patch cable with 50/125 u m core/cladding diameter, is suitable for LANs, SANs and high-speed parallel interconnects for head-ends, central offices as well as data centers..Fiber optic patch cable is ideal for LANs, SANs and high-speed parallel interconnects for head-ends, central offices and data centers.Cable length: 50'.Connections: Two LC male on both ends.Glass fiber construction and low smoke zero halogen (LSZH) jacket for durability.Comes in aqua color.Network speed: 10/40/100 Gbps.Data transfer rate: 12.5 GBps.Core/cladding: 50/125 u m.Allows 40/100 Gb serial transmission up to 300 m (at 850 nm).Commonly used with VCSEL and LED laser light sources, sturdy dual LC male connectors meet insertion loss standards.Provides 10x more bandwidth than conventional 62.5 u m multimode fiber.Backward compatible with existing 50/125 fiber.Meets IEEE 802.3ae, TIA LOMMF and RoHS certifications or standards.Comes with lifetime limited warranty

The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 10gigabit applications at the same time being backward compatible with 50/125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The ALOGIC OM3 Patch Cables are available in various lengths starting from 0.5m to 100m length.Perfect for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, ensuring reliable performance for demanding applications.Offers a convenient 4.92ft length, ideal for short-distance connections without clutter or signal loss.Equipped with LC to LC connectors for secure, precise, and low-loss optical signal transmission.Built with OM3 multimode fiber for 10Gbps speed, featuring a durable LSZH jacket and a turquoise finish for easy identification in complex setups.Supports ultra-fast data transfer up to 10Gigabit Ethernet, making it perfect for high-bandwidth applications.Works seamlessly with OM3-rated fiber optic equipment, including transceivers, patch panels, and network hardware.Meets ISO/IEC 11801 and TIA/EIA standards for structured cabling, ensuring top-notch quality and compliance.2 Years Manufacturer's Warranty

The ALOGIC network cable is designed to meet the needs of modern, high-speed networking environments. This cable features a halogen-free construction, making it a safer option by reducing the emission of toxic and corrosive gases in case of fire. With a core and cladding diameter of 50 / 125 micron, it is optimized for efficient data transmission, ensuring high-quality connectivity through its LC multi-mode connectors. The duplex configuration of the cable supports bidirectional data transfer, enhancing the efficiency of network systems. Additionally, the cable's compliance with OM4 standards ensures its performance over extended distances, making it an ideal choice for a wide range of applications. Its jacket, made from Low Smoke Zero Halogen material, not only contributes to safety but also offers durability, ensuring long-term reliability. Whether for residential or commercial use, the ALOGIC network cable is engineered to provide a high-performance, safe, and reliable networking solution..Perfect for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, delivering reliable performance for critical applications.Compact 3.28ft (1m) length offers flexibility for short-distance connections while keeping your setup neat and organized.LC to LC connectors ensure secure, precise, and low-loss optical signal transmission for uninterrupted connectivity.Made with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable PVC jacket and a turquoise finish for easy identification.Supports high-bandwidth applications including 40G/100G Ethernet, making it ideal for next-generation networking.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Meets ISO/IEC 11801 and TIA/EIA standards for structured cabling, ensuring top-tier quality and compliance.2 Years Manufacturer's Warranty

Discover the ALOGIC fiber optic network cable, a solution designed for high-speed, reliable network connections. This duplex cable is engineered with a 50 / 125 micron core and cladding diameter, ensuring efficient data transmission and compliance with OM4 standards. The use of Low Smoke Zero Halogen (LSZH) material for the jacket makes it safer for the environment by reducing toxic emissions in case of fire and provides a durable construction for long-term use. Equipped with male LC multi-mode connectors on both ends, it offers easy and secure connections for a wide range of networking equipment. Whether you're setting up a new network or upgrading an existing one, the ALOGIC network cable is a smart choice for performance and safety..Perfect for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, delivering exceptional performance for critical applications.Convenient 4.92ft length for short-distance connections, reducing clutter while maintaining superior signal integrity.LC to LC connectors ensure secure, precise, and low-loss optical signal transmission for maximum efficiency.Built with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable LSZH jacket and a turquoise finish for easy identification in complex setups.Supports high-bandwidth applications including 40G/100G Ethernet, ensuring lightning-fast data transfer for demanding workloads.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, guaranteeing quality and reliability.2 Years Manufacturer's Warranty

Discover the ALOGIC fiber optic network cable, a solution designed to meet the demands of modern networking environments. This duplex cable features halogen-free construction and is equipped with LC multi-mode connectors on both ends, ensuring a safe and reliable connection. With a core and cladding diameter of 50 / 125 micron, it supports efficient light transmission for high-speed data communication. The Low Smoke Zero Halogen (LSZH) jacket material not only enhances safety by reducing toxic and corrosive gas emissions but also complies with OM3 and ETL standards, making it a durable and compliant choice for your networking needs..Perfect for high-speed fiber optic connections in enterprise networks and data centers, ensuring reliable LC-to-LC interface integration.Convenient 3.28ft length for tidy, space-efficient installations.Equipped with LC male connectors on both ends for secure and precise connectivity.Constructed with OM3 multimode fiber for excellent bandwidth, featuring a durable LSZH jacket and a bright turquoise color for easy identification..Supports up to 10Gbps high-speed data transfer, making it ideal for modern networking and storage applications.Compatible with LC interface devices, fiber optic transceivers, and OM3-compliant networking hardware.2 Years Manufacturer's Warranty

The Multi Mode OM4 cables are designed to support high transfer speed, the cables are capable of supporting up to 100Gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Designed for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, ensuring maximum performance for mission-critical applications.Generous 9.84ft (3m) length provides flexibility for longer runs while maintaining excellent signal integrity.LC to LC connectors deliver secure, precise, and low-loss optical signal transmission for reliable connectivity.Built with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable PVC jacket and a turquoise finish for easy identification in complex setups.Supports high-bandwidth applications including 40G/100G Ethernet, making it ideal for next-generation networking.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, ensuring top-tier quality and reliability.2 Years Manufacturer's Warranty

The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 1 gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Perfect for high-speed networking in data centers, enterprise setups, and telecom environments, this cable ensures seamless connectivity between devices requiring LC-to-LC fiber optic connections.Offers a convenient 1.64 feet (0.5 meters) length for short-distance, clutter-free installations.Equipped with LC male connectors on both ends, delivering secure and precise fiber optic connections.Constructed with 50/125 µm OM3 multimode fiber, featuring a Low Smoke Zero Halogen (LSZH) jacket for enhanced safety, and finished in a blue color for easy identification.Supports 10 Gbps data transfer speeds, ensuring reliable performance for demanding network applications.Fully compatible with OM3 fiber optic systems and backward compatible with OM2 infrastructure for versatile deployment.2-year manufacturer warranty

Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment.This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.The 450FBLCLC2 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF).Certifications & Standards: RoHS, WEEE

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 Single Mode Duplex Fiber Optic Cable; Duplex fiber optic cable offers simultaneous, bidirectional data transfer.98.4 ft. fiber optic cable for longer distance application.This cable enables safer cable installations in areas with poor ventilation and is safe to use in any application. It features Ultra Physical Contact (UPC), Bend Insensitivity, Flame Retardant, Bend Resistance and EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment. This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.The 450FBLCLC3 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF)

Fiber optic patch cable..Yellow.Fiber optic LC Male/SC Male.Duplex singlemode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket.Applications: Networking equipment that requires single mode fiber optic patch cabling.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SC connectors.Diameter: 9 microns core, 125 microns clad.Fiber type: Glass.Beveled edge on ends of glass makes insertion of plug a breeze.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes duplex fiber optic patch cable, 10' duplex singlemode fiber patch LC/SC cable.Compliant and standards: FDDI, OFNR.Warranty: Lifetime limited

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 6.56ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 19.6ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime