Electronic Equipment Rack

Compatibility: Computer accessories, printers, home theater equipment, a/v components, sound reinforcement, point-of-sale equipment.Input voltage: 110 VAC (89-147 VAC).Input connection: NEMA 5-15P input plug.12' power cord.Dimensions: 7 1/4"(H) x 19"(W) x 5"(D).Surge energy rating: 1440 J.Output voltage: 120 VAC.Current: 20 A.Frequency: 60 Hz.Outlets: 14 x NEMA 5-15R.Form factor: 1U rack mountable.Protection type: Surge, EMI / RFI, over voltage, brownout.Material: Steel.Noise suppression: 80 dB EMI / RFI.Status indicators: Front panel 7 LEDs show incoming voltage levels, surge suppression, line status.Compatibility: Computer accessories, printers, home theater equipment, a/v components, sound reinforcement, point-of-sale equipment.Load capacity: 2400 W.Includes 2400W rack mount line conditioner, LCR2400 line conditioner, mounting hardware, instruction manual.Warranty: 2 years limited.Tripp Lite 14-Outlet mini tower line conditioner with 1440 J energy rating features 7 diagnostic LEDs which display incoming voltage level, surge suppression status and line fault status.

APC AP9563 Basic Rack PDU includes installation guide and rack mounting brackets..Nominal Output Voltage 120V.Maximum Total Current Draw per Phase 16A.Nominal Input Voltage 100V, 120V.Contains Lithium Battery.2 years repair or replace warranty.2 years repair or replace warranty.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL recognized, CSA, UL 1363, UL recognized, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1.75"(H) x 17.60"(W) x 2.25"(D).2 years limited Mfr. warranty.APC® AP9563 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

The B021-000-19-HD2 1U Rack-Mount Console combines a full keyboard, numeric keypad, touchpad and 19-inch color LCD for easy all-in-one control of a computer, server or KVM switch. Easy to install and simple to operate, it slides neatly into 1U of rack space when not in use. The rear DVI-I console port supports both digital and analog video signals for connecting to a DVI- or VGA-enabled server or KVM switch (a DVI to VGA adapter is included). The LCD screen supports video resolutions up to 1920 x 1080 (1080p). Video settings of the connected computer are automatically adjusted for optimal display on the LCD screen. USB 2.0 pass-through ports on the front and rear allow you to connect a USB peripheral, such as a flash drive or CAC card reader, to your computer with a USB cable (sold separately). The B021-000-19-HD2 mounts into 1U of space in an EIA-standard 19-inch rack using the included mounting brackets and user-supplied screws. Simply pull out the steel drawer and flip up the screen when needed, then slide it back into the rack in automatic sleep mode when you're finished. This keeps the keyboard and screen from blocking access to rack equipment when the console is not in use. This console is compatible with all major operating systems and KVM switches with a VGA or DVI monitor port and USB keyboard/mouse ports. This enables the B021-000-19-HD2 to be integrated into an existing system to provide secure management of critical network systems without a major investment in new hardware. Features Space-Saving Console for IT Environments Where Rack Space Is Limited 19 in. LCD monitor, keyboard, numeric keypad and touchpad All-in-one control of computer, server or KVM switch Supports video resolutions up to 1920 x 1080 (1080p) Detachable 6 ft. AC power cord with NEMA 5-15P and C13 connectors Accepts Digital and Analog Video Signals DVI-I port allows connection to DVI digital or VGA analog server or KVM switch DVI to VGA adapter included DDC2B emulation automatically adjusts video settings for optimal display on monitor USB 2.0 Pass-Through Ports Front and rear ports allow easy connection of USB peripheral, such as flash drive or CAC card reader USB cable sold separately Convenient Space-Saving Design Mounts in 1U of space in EIA-standard 19 in. 2- and 4-post racks Slides neatly out of sight when not in use Goes into automatic sleep mode when cover is closed Rack-mounting brackets included Supports Multiple Platforms for Maximum Flexibility Compatible with all major operating systems, including Windows , Mac OS , Linux , UNIX and Solaris Compatible with KVM switches with VGA or DVI port and USB keyboard/mouse ports TAA-Compliant Complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.DVI-I port supports both digital and analog video signals.19 in. LCD screen supports video resolutions up to 1920 x 1080.USB pass-through port for connecting USB peripherals.Goes into automatic sleep mode when cover is closed.Compatible with all major operating systems.Black

The StarTech® WALLMOUNT8 wall-mounting bracket provides 8U of space for mounting shallow rack-mount equipment that is 12" deep. This accessory in black, is made of solid steel and offers hassle-free installation. It optimizes your working space by efficiently mounting your equipment on your wall instead of taking up desk space or other usable surface areas..Wall mounting bracket provides 8U of space for mounting shallow rack-mount equipment that's 12" deep or less to the wall.Dimensions: 14.3"H x 20.5"W x 13.7"D (product), 14.3"H x 20.5"W x 12"D (external), 13.5"H x 17.7"W (internal).Black steel.Frame type: Open frame.Rack type: 2-post.Maximum weight capacity: 80.2 lbs..Improve efficiency in your office or server room by mounting shallow equipment to the wall.Sturdy installation of mission critical equipment with solid steel design.Hassle-free setup with wall mounting holes spaced 16" apart, matching standard dry-wall framework.Rear access panel for cable management.Includes 1 x wall-mount bracket, 24 x M5 cage nuts, 24 x M5 screws with washers, 1 x M6 K-nut, 6 x wood screws, 1 x instruction manual.RoHS compliant.Weight: 17.8 lbs..Comes with lifetime warranty

APC® Basic power distribution unit offers NEMA L6-30P input connections and has input current rating of 30 A. Unit featuring rack mounting brackets can be 1U horizontal rack mounted and offers overload protection up to 24 A..NEMA L6-30P 12' 30 A 200 - 230 V input.208 V 50/60 Hz output.Outlet connector: 10 IEC 320 C13.Overload protection: 24 A.1U horizontal rack mount.Includes: Installation guide, rack mounting brackets, user manual.Enables a quick recovery from overload events.5 - 95% operating relative humidity.5 - 95% s-rage relative humidity.Operating/storage elevation: 0 - 15000'/0 - 50000'.Certifications: cUL listed, CSA, PSE, UL 60950, UL listed, RoHS complaint.Weight: 5.6 lbs..Dimensions: 1.73"(H) x 17.52"(W) x 3.03"(D).2 years limited Mrf. warranty.APC® AP9571A Basic Power Distribution Unit provides reliable power distribution via a single input with multiple output receptacles and distributes power from low amperage single phase circuits to higher-power 3-phase solutions.

Make your networking equipment function smoothly even during power outages and fluctuations with the Tripp Lite SMART1000RM2U UPS. This 570-Joule rated AC surge suppression rack mount UPS is designed with three push button switches for better control and, 7 selectable screens to display UPS and site power parameters. You can integrate the sleek steel backup system with built-in power management..Line interactive sine wave UPS for large network setups.800 W capacity with quick 4 hour recharge time provides consistent backup power.Dimensions: 3.5"H x 17.5"W x 12.5"D.Output voltage of 1000VA to ensure adequate power supply.LCD screen displays power status, operating data and mode, voltage configuration and alarm function.Rack/tower mountable 2U structure features hot-swappable batteries, 6 5-15R output receptacles for ease.Built-in Emergency Power Off (EPO) interface with cable for immediate action.Automatic voltage regulation controls line power operation from 83 to 147 voltage range.UL 1778 and IEEE 587 / ANSI C62.41 compliant.2-year, 3-year with registration.The Tripp Lite SmartPro SMART1000RM2U Line-Interactive 1 kVA UPS features 95 percent efficient AC operation mode to facilitate reduced power consumption and BTU emissions.

The SR42UBMD is part of our new line of mid-depth rack enclosures. Our new line offers 36" (927mm) depth opposed to the standard 42" (1050mm). The SR42UBMD features a massive front-to rear-ventilation capacity that meets or exceeds server manufacturer requirements. Its integrated baying tabs make it easy to combine multiple enclosures in rows for data center applications. This enclosure is also compatible with hot-aisle/cold-aisle configurations. 3000 lbs of standard 19-inch rack equipment in 42U is housed inside the SR42UBMD. Its front and rear pairs of vertical rails have square mounting holes that are adjustable in quarter-inch increments from 4 to 31 inches. Adjustment is quick and an easy-view depth index ensures consistent rail placement without requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference. Two of the adjustable vertical mounting rails support toolless button-mount 0U installation of up to four compatible PDUs and cable managers. This feature makes it easier to route cabling to rack equipment and reduces cord clutter. With its locking, reversible, removable front and rear doors, and locking, removable side panels, the SR45UBMD provides ultimate equipment safety. The side panels are half size for ease of removal and reinstallation. The split rear door design allows the enclosure to be placed closer to a wall. The SR42UBMD meets all requirements toward PCI DSS compliance. The top panel of the SR42UBMD is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for cable routing, and can be quickly removed without tools. To facilitate cable access, the SR42UBMD is open-bottom. All components of the SR42UBMD are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility earth ground. The removable front and rear doors feature quick-release ground wires. To simplify deployment, the SR42UBMD comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure over long distances..3000 lb stationary / 2250 lb rolling load capacity.4 interior vertical posts with unthreaded square hole openings.36" (927mm) depth (with mounting depth increments from 4 to 31") and standard 24" (600mm) width.42U SmartRack enclosure with doors and side panels.Locking, removable side panels keyed alike with doors

APC® Basic power distribution unit featuring NEMA 5-20R outlet connector can be 1U horizontal rack mounted and includes rack mounting brackets. Unit offers NEMA L5-20P input connections and has input current rating of 20 A..NEMA L5-20P 12' 20 A 100 - 120 V input.120 V 50/60 Hz output.Outlet connector: 10 NEMA 5-20R.1U horizontal rack mount.Includes: Installation guide, rack mounting brackets.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL recognized, CSA, UL 1363, UL recognized, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1.75"(H) x 17.60"(W) x 2.25"(D).2 years limited Mrf. warranty.APC® AP9564 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

Tripp Lite Single phase basic power distribution unit has NEMA L6-30P enclosure to offer added protection and can be 1U/0U vertical rack mounted. Unit has NEMA 5-15R outlet connector and offers 15 A overload protection..Single phase NEMA L6-30P 15' 30 A 208 - 240 V input.208 - 240 V 50/60 Hz output.Outlet connector: 16 IEC-C13, 4 IEC-C19.Overload protection: 30 A.1U/0U vertical rack mount.Package includes: PDU1230 power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel nut and bolt grounding lug.Reversible housing; 5.2'' depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Certifications: Tested to UL60950-1 (USA), CSA-C22.2 (canada).Dimensions: 1.75"(H) x 17.50"(W) x 5.20"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

Eaton eATS ePDUs: Designed for switching non phase synchronized AC power sources, the automatic transfer switch ePDUs intelligent circuitry monitors both inputs, providing a fast switch transfer from primary to secondary source power critical equipment without interruption. These ePDUs assure the highest level of redundancy to mission critical applications..Power distribution unit.Dimensions: 1.7"H x 17.25"W x 9.84"D.Input voltage: 120 V, Frequency: 50 - 60 Hz.Input current: 12 A.Power capacity: 1.44 kW.Phase: Single phase.Cord length: 10'.Input receptacles: 2 x NEMA 5-15P.Output receptacles: 10 x NEMA 5-15R.Serial interface: RS232.Mounting style: Horizontal.Rack height: 1U.Ethernet interface: 10/100 Ethernet.Certifications and standards: UL Listed, FCC.3 years standard warranty

Tripp Lite Single phase basic power distribution unit can be 1U/0U vertical rack mounted. Unit has adjustable mounting brackets to offer easy installation..Single phase IEC-320 C20 16 A 100 - 240 V input.Input voltage: 100 - 240 V, frequency required: 50/60 Hz output.Outlet connector: 12 IEC C13, 2 IEC-C19.Overload protection: 16 A.1U/0U vertical rack mount.Package includes: PDU12IEC rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel grounding lug.Reversible housing; 4 1/4" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Weight: 3.2 lbs..Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

Tripp Lite 12U wall-mount rack enclosure includes convenient cutouts at its top and bottom panels for convenient cable routing. Enclosure has adjustable rails with square mounting holes to standard 19" equipments..Material: Plexiglas front door.Form factor: Wall mountable.Dimensions: 25"(H) x 23.6"(W) x 21.6"(D).black.12U (H) x 19"(W) rack.Hinged cabinet swings away from wall bracket for easy equipment and cable access, adjustable mounting depths from 3" to 20 1/2" inches.Locking, reversible front door, locking, removable side panels.Fully assembled for quick installation.Top and bottom panel cable access openings.Adjustable mounting depths from 3" to 20 1/2" inches.Includes smartrack wall-mount enclosure rack cabinet, convenient cutouts for cable routing.Certifications and standards: EIA-310-E.Weight: 60 lbs..Warranty: 5 years.Tripp Lite 12U wall-mount rack enclosure ensures easy equipment access with its hinged cabinet swings and features plexiglas front door.

Eaton eATS ePDUs: Designed for switching non phase synchronized AC power sources, the automatic transfer switch ePDUs intelligent circuitry monitors both inputs, providing a fast switch transfer from primary to secondary source power critical equipment without interruption. These ePDUs assure the highest level of redundancy to mission critical applications..Power distribution unit.Dimensions: 1.7"H x 17.25"W x 9.84"D.Input voltage: 120 V, Frequency: 50 - 60 Hz.Input current: 16 A.Power capacity: 1.92 kW.Phase: Single phase.Cord length: 10'.Input receptacles: 2 x NEMA 5-20P.Output receptacles: 10 x NEMA 5-20R.Serial interface: RS232.Mounting style: Horizontal.Rack height: 1U.Ethernet interface: 10/100 Ethernet.Certifications and standards: UL Listed, FCC.3 years standard warranty

The ATS will maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails, the ATS will switch over to the secondary power source until primary input is restored and stable..Single phase IEC-320 C20 12' 20 A 200 - 240 V input.200 - 240 V 50/60 Hz output.Outlet connector: 8 IEC-C13, 2 IEC-C19.1U horizontal rack mount.Package includes: switch, metered PDU with ATS support, set of 2 C19 to C20 12'/ 3.7 m power cables, user manual with warranty information.2 digit display reports power consumption in amps.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable.2 - 7 ms transfer time.Switched outlets and ethernet interface supports individual outlet control on a real-time or programmable basis and user-specified alarm notification thresholds for all reported site power conditions.DHCP/Manual configuration support.Supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Outlets are factory programmed for sequential turn-on at 250 ms intervals when the PDU is first energized.LEDs confirm power availability on both input lines and for each output receptacle.Typical applications: Ideal for configurations requiring a simple PDU that displays power consumption in amps.Certifications: Tested to UL 60950 (USA, canada), CE (europe), class A (emissions), NOM (mexico), RoHS complaint.Weight: 10.3 lbs..Dimensions: 1.72"(H) x 17.3"(W) x 14.8"(D).2 years limited Mrf. warranty.Tripp Lite Sigle Phase Switched Power Distribution unit provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources.

Single phase NEMA 5-20P / NEMA L5-20P 12 ft 20 A 100 - 127 V input.120 V 60 Hz output.16 NEMA 5-15/20R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached L5-20P input power cord, detachable C19 to NEMA L5-20P 12 ft/3.6m secondary input cord, two NEMA L5-20R to NEMA 5-20P plug adapters, installable 1U mounting brackets, user manual with warranty information.Visual meter reports output power consumption in amps.ATS features provide redundant power for critical network equipment with a single input power cord.Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface.Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported.2-7 millisecond transfer time between primary and secondary inputs.Front panel LEDs confirm power availability on primary/secondary inputs and each output receptacle.ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each input is connected to a separate UPS system.On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is first energized.Typical applications: ATS PDU systems provide a redundant power option with individual outlet control for single-corded network devices.DHCP/Manual configuration support, supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Certifications: Tested to UL 60950 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS complaint.12.2 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.2 years limited warranty.TRIPP LITE 5-15/20R 16 Outlet 20 A 100 - 127 V Switched Power Distribution Unit's ATS features provide redundant power for critical network equipment with a single input power cord.

The Tripp Lite PDUMH30HVNET 5.8 kW single-phase digital switched metered PDU supports 30 A maximum capacity at 208/240 V. It features L6-30P input plug and 16 C13 switched outlets arranged in two separately breakered eight outlet banks. Visual and remote current monitoring of this PDU, tracks the current for each eight outlet bank separately. This 2U rackmount PDU comes with cord retention bracket to plug and power vital network equipment. It provides advanced network control and monitoring with turn on/off, recycle or lock-out power to each individual receptacle, monitor site electrical conditions as well as remotely monitor output power consumption..Power distribution unit offers reliable and cost effective power distribution.Dimensions: 3 1/2"(H) x 17 1/2"(W) x 12 1/2"(D).Metal construction for long lasting durability.Receptacles: one NEMA L6-30P input and 16 x IEC 320 EN 60320 C13 output.Voltage: 208/240 VAC input/output at 50/60 Hz, Input current: 30 A.Output capacity: 5.8 kW.Input cord length: 12'.Form factor: Horizontal (1U, 2U).Offers overload protection.Front panel LEDs: 16 power availability LEDs confirm power off/on status for each built-in outlet.Storage temperature: 5 - 122 deg F (-15 - 50 deg C), Relative humidity: 5 - 95 percent non-condensing, Operating elevation: 0 - 10000'.Offers programmable or real-time outlet power control via built-in web/network monitoring and control card.Management: Protocols- HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP, BOOTP and NTP.The 2U rack mount switched PDU has digital current monitoring, remote control and temperature/humidity monitoring capability.Assures ability to turn on, turn off, recycle or lock-out power to each individual outlet easily.Contains rackmount PDU and 4-post compatible mounting brackets.Meets UL 60950-1 (USA, Canada), Class A (Emissions), RoHS, TAA and NOM (Mexico) standards or certifications.Weight: 13.8 lbs..Comes with 2 years limited warranty

APC® Basic power distribution unit featuring rack mounting brackets can be 1U horizontal rack mounted and offers overload protection up to 24 A. Unit has input voltage rating of 200 - 230 V and input current rating of 16 A..IEC-320 C20 8.2' 16 A 200 - 230 V input.120 - 230 V 50/60 Hz output.Outlet connector: 10 IEC 320 C13, 2 IEC 320 C19.1U horizontal rack mount.Includes: Rack mounting brackets, user manual.Puts power where it is needed most-in the racks near the equipment.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: CE, GOST, VDE, Victoria, RoHS complaint.Weight: 9 lbs..Dimensions: 1 3/4"(H) x 17.60"(W) x 2 1/4"(D).2 years limited Mrf. warranty.APC® AP9559 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

Tripp Lite Single phase basic power distribution unit has NEMA 5-15P enclosure to offer added protection and can be 1U/0U vertical rack mounted. Unit has NEMA 5-15R outlet connector and offers 15 A overload protection..Single phase NEMA 5-15P 15' 15 A 120 V nominal input.120 V 50/60 Hz output.Outlet connector: 13 NEMA 5-15R.Overload protection: 15 A.1U/0U vertical rack mount.Package includes: PDU1215 rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel nut and bolt grounding lug.Reversible housing; 4 1/2" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

The Tripp Lite SmartPro 750 VA 600 W 1U line-interactive rackmount UPS is a vital backup power source during mains power failure. This UPS has USB and DB9 serial interface to support simultaneous communications and also supports optional SNMP/Web accessory card. It incorporates automatic voltage regulation technology to get rid of the minor power fluctuations without switching to battery power. It enables remote outlet management through integrated two bank switched PDU to achieve load shedding or remote reboot of individual devices. It comes along with mounting brackets that support 2 and 4-post installation..Battery run time: 4.9 mins full load, 13.2 mins half load, Recharge time: Less than 4 hrs..Battery type: Rechargeable battery.Cable length: 10'.Output capacity: 750 VA.Output watt capacity: 600 W.Receptacles: Six NEMA 5-15R outlets.Output voltage: 120 VAC.Input voltage: 120 VAC, Input current: 7 A.Joule rating: 450 J.Form factor: 1U rack mountable.Interface: DB9 serial, USB, RS-232.Dimensions: 1 3/4"H x 17 1/2"W x 16 3/4"D.Features steel construction for durability and fan cooling for reliable operation.Operating temperature: 32 - 104 deg F, Storage temperature: 5 - 122 deg F, Humidity: 0 - 95 percent non-condensing.Contains cabling for USB & DB9 monitoring and EPO switching, PowerAlert unattended shutdown and UPS/power monitoring software and instruction manual.Meets FCC Part 15 Category A (EMI), CSA, NOM and UL1778 certifications and standards.Weight: 30 lbs..Comes with 2 years warranty

Tripp Lite™ Power distribution unit is made of sheet metal for durability and has a input/output voltage rating of 100 - 240 V. Power distribution unit is rack mountable and supplies equipment with continuous power from any protected UPS..Single phase NEMA L6-20P, IEC-320 C20 3.7m 20A 100, 120, 127, 200, 208, 230, 240 VAC input.50/60 Hz frequency.Outlet connector: 12 x IEC-C13, 2 x IEC-C19.Black.Cord length: 12'.Output voltage: 100 - 240 V.Material of construction: Sheet metal.Maximum input current: 20A, PDU input voltage 100, 120, 127, 200, 208, 230, 240V, Voltage compatibility: 100, 120, 127, 200, 208, 230, 240 VAC.Dimensions: 1.75"(H) x 17.25"(W) x 3.75"(D).Outlets center to center measurement: Distance between front (C13) outlets = 28.75mm, Distance between rear (C19) outlets = 55mm, Distance between rear (C13) outlets = 28.75mm, TVSS grounding: Rear grounding lug.Style: Rackmount, vertical rackmount, wallmount/under counter, Form factors supported: 1U rackmount, 0U vertical rackmount, wall-mount, and under-counter installation.Ideal for datacenters, network closets, equipment racks and a wide variety of other application types, high quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDUH20DV PDU rackmount PDU, owner's manual.Certifications and standards: Tested to UL 60950 (USA), CSA (Canada), CE (EU), RoHS compliant.Weight: 3.75 lbs..Warranty: 5 years limited.Tripp Lite Power Distribution Unit - Equal Power Distribution

The Tripp Lite PDUMH15-ISO 1.44 kW single-phase metered PDU with isobar surge suppression, provides real-time local reporting of load level in amps and noise suppression. It features a digital display that shows output current to prevent circuit overload when additional equipment is added and has a set of three front-panel LEDs to show wiring fault, protection present and line OK status. This PDU has a rugged all-metal housing and offers rackmount installation with included mounting accessories. It is compatible with 120 VAC sine wave input. The 1U PDU features NEMA 5-15P 15 A 120 V input plug with 15' cord and 14 NEMA 5-15R outlets..Power distribution unit offers reliable and cost effective power distribution.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).Sheet metal construction for long lasting durability.Receptacles: NEMA 5-15P input and 14 x NEMA 5-15R output.Voltage: 120 VAC at 50/60 Hz input/output, Input current: 15 A.Output capacity: 1.44 kW.Input cord length: 15'.Form factor: Horizontal (1U, 2U).Offers overload and surge protection.AC suppression joule rating: 3840 J, AC suppression surge current rating: 60000 A, Clamping voltage (RMS): 140 V.Front panel LEDs: Set of three diagnostic LEDs report LINE OK (green), suppressor or wiring FAULT (red) and PROTECTION PRESENT (green) status.Storage temperature: 5 - 122 deg F (-15 - 50 deg C), Relative humidity: 5 - 95 percent non-condensing, Operating elevation: 0 - 10000'.Built-in two digit visual meter continuously reports PDU load level in amps.Offers SOBAR Network-grade AC surge and noise suppression with EMI/RFI filtering.Contains owner's manual with warranty information.Meets UL1449 3rd Edition (USA) and CSA (Canada), RoHS standards or certifications.Weight: 4.6 lbs..Comes with 2 years limited warranty

Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey. Catalyst 9200 Series switches provide security features that protect the integrity of the hardware as well as the software and all data that flows through the switch. It provides resiliency that keeps your business up and running seamlessly. Combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology, Catalyst 9200 Series switches give you what you need now with investment protection on future innovations. With full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching, Catalyst 9200 Series switches are the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access..Rack mountable switch is the industry's unparalleled solution with differentiated resiliency and progressive architecture for cost-effective branch-office access.Contains 48 PoE+ ports.Enhanced security with AES-128 MACsec encryption, policy-based segmentation, and trustworthy systems.Dimensions: 1.73"H x 17.5"W x 13.8"D.Meets or exceeds IEC 60950-1, UL 60950-1, CAN/CSA C22.2, No. 60950-1, EN 60950-1, AS/NZS 60950.1, Class I Equipment standards.Resiliency with Field-Replaceable Units (FRU) and redundant power supply, fans, and modular uplinks.Flexible downlink options with data, PoE+, or mGig.Operational efficiency with optional backplane stacking, supporting stacking bandwidth up to 160Gbps.UADP 2.0 Mini with integrated CPU offers customers optimized scale with better cost structure.Layer 3 capabilities, including OSPF, EIGRP, ISIS, RIP, and routed access.Advanced network monitoring using full Flexible NetFlow.Plug and Play (PnP) enabled: a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or updates to an existing network.ASIC with programmable pipeline and micro-engine capabilities, along with template-based, configurable allocation of Layer 2 and Layer 3 forwarding, Access Control Lists (ACLs), and Quality of Service (QoS) entries.Lifetime manufacturer limited warranty

HPE ProLiant DL325 Gen11 Are you looking for a scalable, low-cost performance server solution for your virtualized and software-defined compute workloads? The HPE ProLiant DL325 Gen11 server is a low-cost 1U 1P solution that delivers exceptional value balancing compute, memory, and network bandwidth at 1P economics. Powered by 4th Generation AMD EPYC™ Processors with up to 128 cores, increased memory bandwidth (up to 3 TB), high-speed PCIe Gen5 I/O and EDSFF storage, and supporting up to 2 double-width GPUs at the front, this server is a superb low-cost, 1U 1P, performance solution for your virtualized workloads. The silicon root of trust anchors the server firmware, creating a fingerprint for the AMD Secure Processor that must be matched exactly before the server boot. The HPE ProLiant DL325 Gen11 server is an excellent choice for virtualized workloads such as software-defined compute, CDN, VDI, and secure edge apps that require balancing processor, memory, and network bandwidth..This Rack mount server is versatile and designed to handle a range of tasks for small and medium-sized businesses, offering robust performance in a compact form factor..Processor: AMD Epyc 9124 4th Gen 16 cores 32 MB L3 Cache 3.7 GHz RAM: Capacity: Up to 128 GB Technology: HPE DDR5 UDIMM.64GB of Memory. The server supports various RAID levels through the Embedded Intel VROC (Virtual RAID on CPU) controller: RAID 0 RAID 1 RAID 5 RAID 10.Includes the following expansion slots: 2 x PCIe 5.0 x16 (low-profile) 2 x PCIe 5.0 OCP 3.0 slots.Minimum Requirements: Operating System: Microsoft Windows Server 2019 Standard or HPE Integrated Lights-Out (iLO) 5 Processor: AMD Epyc 9124 4th Gen or equivalent Memory: 4 GB DDR5 UDIMM Storage: 500 GB HDD or 128 GB SSD Power Supply: 180W External Power Supply.Power Source: 180W Slim Type External Power Supply Power Management: Idle Power Management: Advanced power management features reduce power consumption during idle periods..Dimensions: 1.69" H x 17.11" W x 25.57" D.Meets several certifications and standards to ensure reliability, security, and compliance: Energy Star Certified: Meets energy efficiency standards set by the U.S. Environmental Protection Agency. Energy-related Products Directive Lot 9 (ErP Lot 9). Waste Electrical and Electronic Equipment Directive (WEEE)..3-year warranty included

The Tripp Lite® SMARTPRO ® Series 2200VA 1920W line-interactive tower/rack mount UPS is a vital backup power source during mains power failure. It features a multifunction LCD screen to display information. This UPS has USB and DB9 serial interfaces for optimal connectivity. It comes with 4-post compatible mounting accessories for firm positioning..4.5 Minute Run Time Full Load.4 x NEMA 5-15/20R.4 x NEMA 5-15R.Output capacity: 2200 VA.Output watt capacity: 1920 W.Receptacles: Four NEMA 5-15/20R, four NEMA 5-15 outlets.Output voltage: 120 VAC.Input voltage: 120 VAC, Input current: 16 A.Joule rating: 570 J.Form factor: 2U rack/tower mountable.Interface: DB9 serial, USB.Dimensions: 3 1/2"H x 17 1/2"W x 19"D.Features steel construction for durability and fan cooling for reliable operation.Operating temperature: 32 - 104 deg F, Storage temperature: 5 - 122 deg F, Humidity: 0 - 95 percent non-condensing.Front panel LCD display shows input voltage, output voltage, estimated runtime and load percentage.Contains PowerAlert software with USB, serial & EPO cabling, 4 post installation kit and owner's manual.Meets FCC Part 15 Category A (EMI), UL1778, NOM and CSA certifications and standards.Weight: 64 lbs..Comes with 2 years warranty

Tripp Lite™ Power distribution unit is made of sheet metal for durability and has a input/output voltage rating of 120 V. Power distribution unit is rack mountable and supplies equipment with continuous power from any protected UPS..Single phase NEMA L5-30P 4.57m 30A 120 VAC input.50/60 Hz frequency.Outlet connector: 12 x NEMA 5-15/20R.Black.Cord length: 15'.Output voltage: 120 V, Overload protection: Two 20A breakers protect 6 outlets each.Material of construction: Sheet metal.Maximum input current: 30A, PDU input voltage 100, 120, 127V, Voltage compatibility: 120 VAC.Dimensions: 1.75"(H) x 17.5"(W) x 6.5"(D).Outlets center to center measurement: Distance between outlets = 30.20mm, Distance between Bank 1 and Bank 2 = 41.45mm, TVSS grounding: Rear grounding lug.Style: Rackmount, vertical rackmount, wallmount/under counter, Form factors supported: 1U rackmount, 0U vertical rackmount, wall-mount, and under-counter installation.Outlets are arranged in two loading banks, each with separate 20A breaker protection, highly reliable design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Ideal means of powering networking equipment in datacenters, computer rooms and network closets, supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDUMH30 metered rackmount PDU, owner's manual with warranty information.Certifications and standards: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.Weight: 7 lbs..Warranty: 2 years limited.Tripp Lite Power Distribution Unit - Ideal for Powering Servers

A rackmount UPS with line interactive topology, the CyberPower Smart App LCD OR1000LCDRM1U provides battery backup (using simulated sine wave output) and surge protection for department servers, workgroup servers, workstations, network devices, and telecom installations without active PFC power supplies. The OR1000LCDRM1U uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently. This model accepts the RMCARD205 network management card for remote management and control via a standard web browser or network management system. The OR1000LCDRM1U comes with a three-year warranty and a $300,000 Connected Equipment Guarantee..Line-interactive UPS protects electronic equipment with 6 outlets for seamless connectivity.Power Capacity: 1000VA; Output Power Capacity: 600 W.Surge energy rating: 1150 Joules.Provides USB connectivity for maximum flexibility.9.84' cord allows you to set up your system at a comfortable distance.Charge time: 8 hours.Output voltage of 120 VAC to ensure adequate power supply.Rackmount form makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds RoHS, cUL 107.1, UL 1778, and FCC Class B standards.Dimensions: 1.73"H x 17.24"W x 15.75"D.3-year manufacturer limited warranty

A rack/tower convertible UPS with line interactive topology, the CyberPower Smart App LCD OR2200LCDRT2U provides battery backup (using simulated sine wave output) and surge protection for office servers, corporate and department networks, workgroup servers, workstations, network devices, and telecom installations without active PFC power supplies. The OR2200LCDRT2U uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently. The OR2200LCDRT2U comes with a three-year warranty and a $300,000 Connected Equipment Guarantee..Line-interactive UPS protects electronic equipment with 8 outlets for seamless connectivity.Power Capacity: 2000VA; Output Power Capacity: 1320 W.Surge energy rating: 1840 Joules.Provides USB connectivity for maximum flexibility.10' cord allows you to set up your system at a comfortable distance.Charge time: 8 hours.Output voltage of 120 VAC to ensure adequate power supply.Rack-mountable / external form makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds RoHS, FCC, cUL, UL 1778, DOC-B, and CSA C22.2 No. 107.1 standards.Dimensions: 3.5"H x 17.24"W x 15.75"D.3-year manufacturer limited warranty

A rackmount UPS with line interactive topology, the CyberPower Smart App LCD OR1500LCDRM1U provides battery backup (using simulated sine wave output) and surge protection for department servers, workgroup servers, workstations, network devices, and telecom installations without active PFC power supplies. The OR1500LCDRM1U uses Automatic Voltage Regulation (AVR) to correct minor power fluctuations without switching to battery power, which extends battery life. AVR is essential in areas where power fluctuations occur frequently. This model accepts the RMCARD205 network management card for remote management and control via a standard web browser or network management system. The OR1500LCDRM1U comes with a three-year warranty and a $300,000 Connected Equipment Guarantee..Line-interactive UPS protects electronic equipment with 6 outlets for seamless connectivity.Power Capacity: 1500VA; Output Power Capacity: 900 W.Surge energy rating: 1150 Joules.Provides USB connectivity for maximum flexibility.9.84' cord allows you to set up your system at a comfortable distance.Charge time: 8 hours.Output voltage of 120 VAC to ensure adequate power supply.Rackmount form makes it convenient to install and use.Lead acid battery ensures efficient performance.Meets or exceeds UL 1778, cUL 107.1, FCC Class B, and RoHS standards.Dimensions: 1.73"H x 17.24"W x 19.5"D.3-year manufacturer limited warranty

The Vertiv Liebert GXT5 UPS, with a capacity of 2000VA/1800W, is a 2U compact and efficient UPS solution for ensuring the health and availability of IT infrastructure. With online, double conversion technology, the Vertiv Liebert GXT5 UPS protects critical equipment against outages and every type of power disturbance without drawing on battery power, extending battery life and minimizing replacements..6-Outlet on-line double conversion UPS solution which offers premium power outage protection and continuous power conditioning in a compact and flexible rack/tower form factor.Reliable, easy-to-manage power protection and battery backup with 2000VA (1800W) capacity..4 hours charge time to 90% capacity after a complete discharge with full load connected.120VAC (user configurable: 110V, 115V, 120V, 125V) output voltage, 50/60Hz, single-phase, 2 wire-plus-ground.Made in 2U rack-mountable form factor.Utilizes valve-regulated, non-spillable, lead acid cells battery.User-friendly interface that includes color graphic display with gravity sensing feature.Remote management capabilities support real-time environmental monitoring and alarm notifications.Supports SNMP, web, and environmental sensors with included RDU101 communications card.Individually programmable output power receptacles.Rack / tower convertible systems.Hot-swappable internal battery and scalable power with auto-detection of external battery cabinets.2019 ENERGY STAR 2.0 certification and high operating efficiency in standard and eco-mode.Meets or exceeds ANSI C62.41 Category B/ ISTA Procedure 1A / UL 1778 4th Edition and CSA 22.2 No 107.3/ FCC Part 15 (Class A) - CISPR22 Class A (RFI)/ WEEE and ROHS2 REACH standards.3-year manufacturer limited warranty