Electronics Media Converters

The Comprehensive® CCN-VGA2HD VGA/HDMI white converter adapter lets you to convert analog PC RGBHV to a digital HDMI signal instead of using an extra VGA cable. With up to 1920 x 1080 at 60Hz multiple resolution support, this adapter confirms better compatibility with wide brands of PCs/HDTVs and delivers high quality pictures. It supports analog stereo and safe delivers the audio over HDMI without compromising quality. It offers advanced signal processing with great precision for enriched colors and complete details. It allows you to use 5 V USB cable for audio input and power..Converter adapter convert signals of high definition resolution to high-speed digital signal without data loss.Connection type: VGA, USB to HDMI.Comes in white color.Dimensions: 0.39"H x 1.77"W x 2.16"D.Supports analog stereo and outputs the audio over HDMI.Provides advanced signal processing with great precision.Hot swappable and hot pluggable.Weight: 0.15 lbs..Comes with 2 years warranty

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial deployments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).Power Consumption 4 Watts typical.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs. Black Box® Multipower Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port with a CAT5 cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC. The converters not only link 10- and 100-Mbps segments to fiber cabling, they also work as data rate converters, performing 10/100 auto negotiation on the twisted-pair port. Choose from multimode duplex, single-mode duplex, and single-mode single-strand duplex fiber versions. For extra versatility, you can power the Multipower Miniature Media Converter one of three ways: through the external AC power supply included with each converter, through the optional USB Power Adapter Cable (LHC021A), which plugs into a PC's USB port and is sold separately, or through the optional rackmount PowerTray (LHC018A-AC-R2). Media Converter Fast Ethernet Multimode 1300nm 2km SC. 10/100Mbps copper to 100Mbps fiber. Typical Enterprise applications include LAN extension, fiber mode conversion, or Ethernet speed conversion. These media converters feature a small metal enclosure that can be used stand alone or inserted into a high density rack mount chassis, LHC018A-AC-R2. Converters include an external 100-240VAC power adapter with US and Europe plug clips. Converters may also be powered from a USB port using the LHC021A USB power cable. The LHC018A-AC-R2 chassis is 1.5U high, has slots for up to 18 media converters, and includes a 100-240VAC power supply. The media converters are unmanaged, plug and play with no configuration..Connects Ethernet or Fast Ethernet to fiber optic cable..Compact size-measures just 0.8"H x 1.8"W x 3.4"D..Converters may also be powered from a USB port using the LHC021A USB power cable..Auto negotiates for speed and duplex..A DIP switch enables Link Fault Pass-Through to be turned on and off for better troubleshooting.

Features The Axiom Mini 10/100/1000Base-TX to 100/1000Base-FX Media Converter Series is a Gigabit Ethernet stand-alone Mini unmanaged media converter that provides cost effective, entry-level media conversion between Copper RJ45 10/100/1000Base-TX ports and 100/1000Base-FX fiber optic ports. Available with an open SFP port or its fixed connector configuration, deployments can be just plug-and-play or are fully customizable with the transceiver of your choice. With its small size, it is ideal for locations where space is limited. Choose from Multimode or Single-mode fiber connections to meet the distance requirements of your network. Unit and Port LEDs allow for quick status information Auto-Negotiation Full-Duplex or Half-Duplex Operation Modes Auto-MDI/MDIX Automatic Link Restoration Connect to legacy network equipment Eliminate Collision Domains 10/100/1000Base-TX UTP to 1000Base-FX Fiber media conversion Supports IEEE802.3U IEEE802.3z 1000Base-TX/FX protocols , IEEE802.3ab standards Available with Open SFP Port or optional built in LC/SC/ST Connections DIP switch to set different configurations Compact package size Supports IEEE802.3x flow control; 100Base-FX interface; auto MDI-MDIX function; LFP function.Connect different types of media within a network with this single port.With 10/100/1000Base-TX technology get up to 1000Mbps data transfer rate over twisted pair cable.The unit is standalone and you can place it anywhere on a flat surface

The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..1000Base‑SX/LX fiber, SC connector (multimode or single‑mode supported).Stand‑alone Gigabit Ethernet Media Converter, bridges 1000Base‑T copper to 1000Base‑SX/LX fiber.Data Transfer Rate: 1000 Mbps (1 Gbps).Up to 550 m on multimode (SX); up to 10,000 m (10 km) on single‑mode (LX).Gigabit Ethernet supported (1000Base‑T to 1000Base‑SX/LX).Power Consumption 3 Watts (typical).850 nm (SX multimode), 1310 nm (LX single‑mode).Lifetime Limited Warranty

This is a mini media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-LX(ST) via a 1310nm single-mode fiber (SMF) ST connector, which allows distance reach up to 20km. This provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 100Base-LX fiber, while extending the network reach beyond the 100m reach limitation of copper and saving space (3.75" x 2.25" x 1"). Our media converters are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs..Expand your network capacity and fulfill requirement with this 2 transceiver/media converter.With 10/100/1000Base-TX network technology, get fast transfer rate and reliable data connection.Ensures reliable performance for everyday use

Copper port auto negotiates for network speed and features Auto MDI-X for easy cabling. LEDs indicate when it is feeding PoE power as well as when power is interrupted. RoHS compliant. Connect Gigabit-speed fiber optic to a 10-/100-/1000-Mbps copper UTP segment while also powering 802.3af devices at the end of the CAT5 run. This PoE PSE Gigabit Media Converter from Black Box enables you to transparently connect copper cabling to multimode fiber as an economical way to extend Ethernet communications well beyond the 100-meter (327-foot) CATx limit. Along with matching copper to interference-free fiber at Gigabit speeds, the converter doubles as power sourcing equipment (PSE) for Power over Ethernet (PoE) devices plugged in on the copper side. Using existing UTP cabling for both data communications and 48-VDC power simplifies a network application in terms of provisioning power and maintaining equipment. It's particularly ideal for locating equipment where electrical access is inconvenient or just too expensive to locate. Install PoE-compatible security cameras and wireless access points in areas without any nearby power outlets while reducing your overall power consumption, too. Plus, the PoE PSE Gigabit Media Converter has extensive power management features, including overcurrent protection, undercurrent detection, minimum load sensing, and PSE MDI power enable/disable. For reliable data communications, the media converter boasts link fault pass-through (LFP) capabilities, monitoring receive ports on both the fiber and copper sides for loss of signal. If signaling is lost on one media port, it automatically disables the transmit (TX) signal to the other media port. Additionally, a far-end fault (FEF) function enables the converter to cease sending a link pulse to a link partner if signaling on the fiber receive (RX) port is lost. The link partner will also synchronously stop sending data. This way, you don't lose valuable data transmitted over an invalid link. This product is covered by one or more of the following: United States Patent Nos. 7,457,250; 8,902,760; and/or 9,019,838..Compliant to EN62368.A low-cost, economical solution for powering PoE devices CATx.Powered device (PD) signature sending detects when a PoE device is connected..Protects against damage caused by overcurrent events and offers undercurrent detection..Link fault passthrough monitors both copper and fiber receive ports for loss of signal.

Startech.com® Single mode fiber media converter transforms and extends a gigabit Ethernet connection up to 24.8 miles/40 km over single mode LC fiber. Converter features rugged steel casing for durability in harsh environments..Interface/ports: 1 x RJ-45 female, 1 x fiber-optic LC female.Dimensions: 0.9"(H) x 3.4"(W) x 6.1"(L).Compatibility: PC.Connectivity technology: Wired.Form factor: Desktop, rack mountable.Black.Fiber optic mode: Single mode, half/full-duplex operating mode.Data transfer rate: 2000 Mbps (full-duplex mode).MTBF: 65,000 hours.Perfect for secure connections required by government agencies where EMI is not acceptable.Provides connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether.Environment conditions: Operating temperature: 0 - 60 deg C, Storage temperature: -10 - 70 deg C, Humidity: 10 - 90% RH.Input voltage: 115 - 230 AC.Output voltage: 12 DC, output current: 1A.Center tip polarity: Positive.Includes 1 x fiber media converter, 1 x universal power adapter (NA/UK/EU), 1 x instruction manual.Certifications and standards: RoHS, IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, FC, FCC.Weight: 14.7 oz..Max transfer distance: 85 ft 62.5 microm optical fiber 160 MHz, 108.90 ft 62.5 microm optical fiber 200 MHz, 216 ft 50.0 microm optical fiber 400 MHz, 270 ft 50.0 microm optical fiber 500 MHz, 984 ft 50.0 microm optical fiber 2 GHz, 1312 ft 50.0 microm optical fiber.Warranty: 2 years limited.Startech.com® Single mode fiber media converter enables to extend a gigabit Ethernet network over single-mode fiber and supports full gigabit speeds for ideal network performance.

The SBFTF Series is a that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..SFP fiber port, allowing flexibility to choose single‑mode or multimode fiber depending on the installed SFP module.A stand‑alone Fast Ethernet media converter designed to connect copper Ethernet devices to fiber networks, supporting both half‑duplex and full‑duplex environments..Supports 10 Mbps and 100 Mbps operation, with automatic rate conversion for legacy copper devices..Distance depends on the SFP module used; with single‑mode SFPs, up to 120 km is supported, while multimode SFPs typically reach 2 km.Built for Fast Ethernet (100 Mbps); not intended for Gigabit Ethernet operation..Operates from a 12V input with low power draw, suitable for energy‑efficient deployments..Designed for high reliability; Lantronix converters typically feature long MTBF ratings suitable for continuous operation..Determined by the installed SFP; common options include 850 nm (multimode) or 1310/1550 nm (single‑mode)..Lifetime Limited Warranty

The iConverter xFF is a protocol-transparent media converter that provides reliable and cost-effective conversion between different wavelengths, multimode and single-mode, and dual and single-fiber. The iConverter xFF operates as a protocol and rate-transparent device, supporting Small Form Pluggable (SFP) transceivers with data rates from 1Mbps to 8.5Gbps. The xFF supports a variety of network protocols, including Ethernet, Fast Ethernet, Gigabit Ethernet, SONET (OC-3/12/48), SDH (STM-1/4/16) and 1x/2x/4x/8x Fibre Channel protocols..Expansion Slot Type: SFP.Number of Total Expansion Slots: 2.Number of SFP Slots: 2

The SBFTF Series is a that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..100Base‑FX fiber, SFP slot (supports multimode or single‑mode modules).Stand‑alone Fast Ethernet Media Converter, bridges 10/100Base‑TX copper to 100Base‑FX fiber.10 Mbps / 100 Mbps copper, 100 Mbps fiber.120,000 meters (120 km) depending on fiber type.Fast Ethernet (10/100Base‑TX to 100Base‑FX), not Gigabit.Power Consumption 3 Watts (12V DC input).1310 nm (standard for 100Base‑FX single‑mode/multimode modules).Lifetime Limited warranty

The M/GE-T Series is a Gigabit Ethernet stand-alone Mini media converter that provides cost effective, entry-level media conversion between 1000Base-T ports and 1000Base-SX/LX ports. With its fixed configuration, deployments are just plug-and-play, and with its small size, it is ideal for locations where space is limited. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Auto-Negotiation.Auto-MDI/MDIX.Automatic Link Restoration

This is a media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-SX(SC) via a 850nm multi-mode fiber (MMF) SC connector, which allows distance reach up to 550m. This provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 1000Base-SX fiber, while extending the network reach beyond the 100m reach limitation of copper. Our media converters are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs..Expand your network capabilities with this 2 transceiver/media converter.With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over twisted pair cable.Ensures reliable performance for everyday use

The S4110 is a stand-alone fiber to fiber media converter. It is protocol independent and supports data rates from 1Gbps to 11.5Gbps through two open SFP+ slots. This allows network managers to customize the S4110 with a pair of SFP+ modules to meet their network requirements. The open SFP+ ports support a wide variety of Transition Networks 10GE SFP+ fiber modules. This any-rate to same- rate converter can be used to perform reliable and cost-effective single mode to multimode conversion or it can be used to provide wavelength conversion in CWDM applications..Fiber to fiber repeater.Supports data rates from 1Gbps to 11.5Gbps.Support any-rate to same-rate.Up to 100,000:1 contrast ratio

The SBFTF Series is a stand-alone media converter that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Singlemode fiber with SC connector..Stand‑alone Fast Ethernet media and rate converter bridging 10/100Base‑TX copper to 100Base‑FX fiber..Supports 10 Mbps and 100 Mbps Fast Ethernet speeds..120,000 meters (120 km) over singlemode fiber..Ethernet supported (10/100Base‑TX to 100Base‑FX), not Gigabit..Typical operating consumption 3 Watts..High reliability with MTBF around 1,000,000 hours..Operates at 1310 nm wavelength for singlemode fiber transmission..Lifetime Limited Warranty

The SBFTF1010-130 Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver that significantly reduces network down time by adding a new level of redundancy to 10/100 Ethernet connections. The Redundant Transceiver has three ports: one for the critical (main) device, one for the default (primary) path to the critical device, and another (backup) for the backup path. It is a smart device that will not send any signal on a path that is inactive. If the primary path loses its link, then the transceiver will switch to the backup path in approximately 189 milliseconds. When the primary path re-establishes its link, the Redundant Link Protector will automatically switch back to the primary path. Optional functionality, controlled via a dip switch, allows the unit to move from the fault-tolerant mode to a 3-port switch mode..Singlemode fiber with SC connector for secure long‑distance Ethernet transmission..Media converter designed for redundant Ethernet link protection with automatic failover between primary and backup paths..Supports 10 Mbps and 100 Mbps Fast Ethernet speeds with auto‑negotiation..Provides fiber connectivity up to 20,000 meters (20 km) over singlemode fiber..Fully supports Ethernet (10/100BASE‑TX), but does not support Gigabit speeds..Operates with low power consumption of approximately 3 Watts..Offers high reliability with a Mean Time Between Failures of about 1,000,000 hours..Operates at 1310 nm wavelength optimized for singlemode fiber transmission..Lifetime Limited Warranty

The SBFTF Series is a stand-alone media converter that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Multimode fiber with ST connector for secure copper‑to‑fiber conversion..Stand‑alone Fast Ethernet media and rate converter bridging 10/100Base‑TX copper to 100Base‑FX fiber..Converts 10 Mbps and 100 Mbps Ethernet over copper to 100 Mbps Ethernet over fiber..Supports multimode fiber links up to 2,000 meters..Ethernet supported (10/100Base‑TX to 100Base‑FX), not Gigabit..Low operating consumption, typically 3 Watts..High reliability with MTBF around 1,000,000 hours..Operates at 1310 nm wavelength for multimode fiber transmission..Lifetime Limited Warranty

The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Supports 1000Base‑SX multimode fiber with a standard SC connector, ensuring compatibility with widely used fiber cabling systems in enterprise and campus networks..Operates as a stand‑alone Gigabit Ethernet Media Converter that bridges 1000Base‑T copper ports to 1000Base‑SX fiber ports.Provides a full 1000 Mbps (1 Gbps) data throughput, delivering high‑speed connectivity.Extends network reach up to 550 meters over multimode fiber, making it ideal for medium‑range deployments.Fully compliant with Gigabit Ethernet standards, supporting 1000Base‑T to 1000Base‑SX conversion.Consumes approximately 3 Watts of power, offering energy‑efficient operation.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility with industry‑standard fiber component.Engineered for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 850 nm wavelength for multimode fiber, the industry standard for 1000Base‑SX applications,.Lifetime Limited Warranty

Connect your HDMI Display to an SDI Video Source - Connect an SDI Equipped audio/video source device such as a video camera to an HDMI display-3G SDI to HDMI / BNC HDMI Converter / BNC to HDMI Adapter / BNC to HDMI Converter / Camera to HDMI Converter / Convert SDI to HDMI / Convert SDI Video Sources to HDMI Video Output - 755ft (230m).Increase scalability, with built-in 3G SDI daisy chain port.Maintain High-definition video quality while converting from 3G SDI to HDMI, with support for resolutions up to 1080p.Hassle-free installation, with pre-installed mounting brackets and no software or drivers required.Built-in 3G SDI daisy chain port.Receives 3G SDI signals from up to 755ft (230m).Supports video resolutions up to 1920x1200 / 1080p.Plug and play SDI to HDMI conversion.Supports AES & EBU Audio Decoding

The SBFTF1010-130 Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver that significantly reduces network down time by adding a new level of redundancy to 10/100 Ethernet connections. The Redundant Transceiver has three ports: one for the critical (main) device, one for the default (primary) path to the critical device, and another (backup) for the backup path. It is a smart device that will not send any signal on a path that is inactive. If the primary path loses its link, then the transceiver will switch to the backup path in approximately 189 milliseconds..Built for singlemode fiber operation at 1310 nm wavelength and equipped with a durable SC connector for secure long‑distance Ethernet transmission..Media converter for redundant Ethernet link protection..Supports both 10 Mbps and 100 Mbps Fast Ethernet speeds.Provides reliable fiber connectivity up to 20,000 meters (20 km) over singlemode fiber.Fully compliant with Ethernet standards IEEE 802.3 and IEEE 802.3u for 10/100BASE‑TX operation.Consumes approximately 3 Watts of power during typical operation, offering energy efficiency and reduced heat output for continuous industrial use..Offers an impressive Mean Time Between Failures of about 1,000,000 hours, reflecting exceptional reliability for mission‑critical networking environments..Operates at a standard 1310 nm wavelength on singlemode fiber.Lifetime Limited Warranty

Extend RS232, RS422 or RS485 protocols over multimode fiber so different types of equipment can talk to one another in point to point or multipoint environments. Serial extenders work well in factory automation, building automation, and process automation where PLC's with RS232, RS422 or RS485 interfaces are used to control devices. The ability to extend the distance to their devices over fiber while also adding protection from electrical interference which can be caused by large motors which are prevalent in these environments is very beneficial..Data-derived or RTS transmit/receive switching (RS-485).Extended ambient operating range -40 to +176° F (-40 to +80° C).Communicate signals in a point-to-point or ring topology..Ideal for fiber applications that use different interface protocols.

The Tripp Lite P136-06N-HV-V2 DisplayPort 1.2 to VGA/HDMI all-in-one converter adapter supports 36-bit deep color. This 6" adapter is compatible with tablets, laptops and other devices equipped with female DisplayPort..All-in-one converter adapter is perfect for various laptop, tablet, monitors, projectors and televisions.Cable length: 6".Connectors: 1 x display port 1.2 male on the first end, 1 x HDMI/1 x 15-pin HD-15 female VGA on the second end.Comes in black color.Supported resolution: 3840 x 2160.Ideal for trade shows, classrooms, lecture halls and other presentations, supports 36-bit deep color (12 bits per channel).System requires the connected computer to have a DP++ ( Displayport ++ ) port.Small size for easy carrying in laptop bag or briefcase, plug and play.Includes owner’s manual.RoHS compliant.Comes with 1 year limited warranty

The SBFTF Series is a stand-alone media converter that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Supports single‑mode fiber with an SC connector, enabling long‑distance transmission over optical fiber.Functions as an unmanaged stand‑alone Fast Ethernet media converter, bridging 10/100Base‑TX copper ports to 100Base‑FX fiber ports.Operates at 10 Mbps or 100 Mbps, with automatic rate conversion to support legacy copper devices.Extends network reach up to 20 km over single‑mode fiber.Designed for Fast Ethernet (100 Mbps) environments; not intended for Gigabit Ethernet.Operates from a 12V input; typical consumption is low, suitable for energy‑efficient deployments.While exact MTBF is not listed, Lantronix converters are designed for high reliability in continuous operation.Uses 1310 nm wavelength for single‑mode fiber transmission.Lifetime Limited Warranty

TRENDnet's Gigabit PoE PD SFP Fiber Media Converter, model TFC-PGSFP, converts 100/1000BASE-T copper Ethernet to 1000BASE-SX/LX Fiber SFP media and vice versa. The TFC-PGSFP is conveniently powered via PoE switch or injector, no power adapter is required. It features one gigabit PoE input port for power and data, plus one SFP slot that supports both multimode (SX) or single-mode (LX) SFP modules. The SFP slot accommodates both Fast Ethernet and Gigabit SFP modules providing further installation flexibility. NDAA / TAA compliant (U.S. and Canada only) Dual Speed SFP Slot Dual-speed SFP slot supports both 100Mbps and 1000Mbps SFP modules for multimode or single-mode fiber applications. PoE Powered No power adapter required-this fiber SFP converter is powered via an 802.3af/at PoE switch or injector at distances up to 100m (328 ft.). Compact Small and compact metal housing design provides greater installation flexibility. PACKAGE CONTENTS TFC-PGSFP Quick Installation Guide.SFP slot accommodates multimode or single-mode modules.PoE Powered - no power adapter is required.NDAA / TAA compliant (U.S. and Canada only).Supports Link Fault Pass-Through (LFPT).1 x 100/1000BASE-T PoE input port

StarTech 10' HDMI to VGA active converter cable.Active converter cable saves upgrade cost by connecting your HDMI computer to a VGA monitor or projector.Reduces clutter and connect your display at greater distances with a long 10' adapter cable.Provides 19 pin HDMI male input and 5 pin USB micro-B female to 15 pin high density D-sub VGA male output.Features copper conductor for better conductivity.Dimensions: 0.6"H x 1.6"W

Cisco 100BASE-FX small form-factor pluggable (SFP) fast Ethernet interface converter is a hot-swappable device that plugs into a gigabit Ethernet SFP port on Cisco catalyst 3750 series, 3560 series, and 2970 series switches..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.4"(H) x 2.2"(W) x 1/2"(D).Compatibility: Cisco catalyst 3750, 3560, and 2970 series switches.Connectivity media: 62.5/125 um multi mode fiber, 50/125 um multi mode fiber.Transmit (dBm): 50/125-micron: -23.5 min, -14max, 62.5/125-micron: -20 min, -14max, receive (dBm): 50/125-micron: -33.35 min, -11.8 max, 62.5/125-micron: -33.35 min, -11.8 max.Distance supported: 6.5'.Operating temperature: 32 - 158 deg F, storage temperature: -40 - 185 deg F.Surge current: 350 typical, wavelength (nm): 1270 min, 1300 typical, 1380 max.Power consumption: 1.5 W per port.Input voltage: 3.3 V - 3.5 V device, 3.3 V typical device.Input current: 405 mA typical, 450 mA maximum.Data transfer rate: 100 Mbps fast Ethernet full duplex.MTBF: 12,820,512 hours.Form factor: Hot-swappable.System requirements: Cisco IOS software release 12.2(20)SE1.Application/usage: Data networking.Regulatory and standards compliance: IEC 60825-1.SFP fast ethernet interface converter 100FX SFP on GE SFP ports for DSBU switches.

The SBFTF Series is a stand-alone media converter that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Supports multimode fiber with an LC connector, enabling shorter‑range fiber transmission compared to single‑mode..An unmanaged stand‑alone Fast Ethernet media converter that bridges 10/100Base‑TX copper ports to 100Base‑FX multimode fiber ports..Operates at 10 Mbps or 100 Mbps, with automatic rate conversion for legacy copper devices..Extends network reach up to 2 km over multimode fiber..Designed for Fast Ethernet (100 Mbps) environments; not intended for Gigabit Ethernet..Lantronix converters are engineered for high reliability in continuous operation..Uses 1310 nm wavelength for multimode fiber transmission.

The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Supports 1000Base‑LX singlemode fiber with a standard SC connector.Functions as a stand‑alone Gigabit Ethernet Media Converter that bridges 1000Base‑T copper ports to 1000Base‑LX fiber ports.Provides a full 1000 Mbps (1 Gbps) throughput, ensuring high‑speed performance for demanding applications.Extends network reach up to 10,000 meters (10 km) over singlemode fiber.Fully compliant with Gigabit Ethernet standards, supporting 1000Base‑T to 1000Base‑LX conversion.Operates efficiently with a typical power consumption of approximately 3 Watts.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility.Engineered for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 1310 nm wavelength for singlemode fiber, the industry standard for 1000Base‑LX applications.Lifetime Limited Warranty

The Transition Networks® 1-port RJ-45 to SFP standalone Gigabit Ethernet media converter is perfect for business and mobile backhaul applications. It has 10/100/1000BT to 1000B-X SFP expansion slot and supports up to a distance of 328.08'..Stand-alone Gigabit Ethernet remotely managed media converter is ideal for business and mobile backhaul applications.Dimensions: 1"H x 3 1/4"W x 6 1/2"D.Comes in black color.Interfaces/ports: One 10/100/1000Base-T RJ-45, one SFP slot, USB.Power supply: input: 100 - 240 VAC, 1 A, output: 12 VDC, 1.25 A.Data rates: 10/100/1000 Mbps (copper), 1000 Mbps (fiber).Form factor: External.IEEE standards: IEEE 802.3, 802.3ah, 802.1P, 802.1Q.Frame size: 10240 byte jumbo frames, MAC addresses: 8K.Maximum distance supported: 328.08'.Features two selectable remote management modes, auto-MDI/MDIX, auto-negotiation, pause, link pass through, far-end-fault and remote loopback.Temperature: 0 - 50 deg C operating, -25 - 85 deg C storage, Humidity: 5 - 95 percent non-condensing.Meets EN55022 Class A, EN55024, UL60950, CE Mark certifications and standards.Weight: 2 lbs..Comes with lifetime warranty

The SBFTF1010-130 Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver that significantly reduces network down time by adding a new level of redundancy to 10/100 Ethernet connections. The Redundant Transceiver has three ports: one for the critical (main) device, one for the default (primary) path to the critical device, and another (backup) for the backup path. It is a smart device that will not send any signal on a path that is inactive. If the primary path loses its link, then the transceiver will switch to the backup path in approximately 189 milliseconds..Singlemode fiber with SC connector for secure and long‑distance Ethernet transmission..Media converter designed for redundant Ethernet link protection with automatic failover between primary and backup paths..Supports 10 Mbps and 100 Mbps Fast Ethernet speeds with auto‑negotiation for duplex modes.Provides fiber connectivity up to 20,000 meters (20 km) over singlemode fiber..Fully supports Ethernet (10/100BASE‑TX), but does not support Gigabit speeds..Operates with low power consumption of approximately 3 Watts..Offers high reliability with a Mean Time Between Failures of about 1,000,000 hours..Operates at 1310 nm wavelength optimized for singlemode fiber transmission..Lifetime Limited Warranty

Convert and extend a Gigabit Ethernet connection up to 550m over multimode SC fiber - Provides a cost-effective Ethernet copper to fiber or fiber to copper link - LFP mode on fiber/copper sides - Compact design and wall mountable with easy installation - SC connection (fiber) and RJ45 connection (copper) - Fiber to Ethernet Converter with - 850 nm wavelength - Fiber to Copper Converter / Fiber optic media converter / Fiber to Ethernet Media Converter / Media converter fiber to Ethernet.Converts and extends a Gigabit Ethernet fiber (1000Mbps) network over multimode fiber on 1000BASE-SX networks.Provides a cost-effective Ethernet to fiber/copper to fiber link.Supports a maximum distance of 550 m over multimode fiber-optic cable (SC connection).Compact design and wall mountable.Non-blocking full wire-speed forwarding rate.LED Indicators for simple Ethernet/fiber network link monitoring.850 nm wavelength.Supports IEEE 802.1q Tag VLAN pass-through.Convert and extend a Gigabit Ethernet connection up to 550 m over multimode SC fiber

The SBFTF Series is a that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Uses multimode fiber with SC connector, ideal for short‑to‑medium distance Ethernet transmission..Stand‑alone Fast Ethernet media converter designed to bridge copper 10/100Base‑TX connections to fiber 100Base‑FX links..Supports 10 Mbps and 100 Mbps Ethernet speeds, automatically negotiating duplex modes for compatibility..Provides reliable multimode fiber connectivity up to 2,000 meters, suitable for building or campus networks..Fully compliant with Ethernet standards (10/100Base‑TX to 100Base‑FX), but does not support Gigabit speeds..Operates efficiently with typical power consumption around 3 Watts, minimizing heat and energy use..Offers high reliability with a Mean Time Between Failures of approximately 1,000,000 hours..Operates at 1310 nm wavelength optimized for multimode fiber transmission..Lifetime Limited Warranty

Features The Axiom POE+ (PSE) Series are a 10/100/1000Base-TX to 1000Base-FX (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Compliant with IEEE802.3at standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, providing power to or IEEE802.3at powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feet). Features: 10/100/1000Base-TX UTP to 1000Base-FX fiber media conversion IEEE802.3at PoE+ PSE compatible Built-in AC/DC power supply Over-current protection DIP switch to set different configurations LFP (Link Fault Pass-through) support.Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.With 1000Base-SX technology get up to 1000Mbps data transfer rate over optical fiber cable.Ensures reliable performance for everyday use

This Ethernet fiber media converter offers an easy, cost-effective way to extend your network over fiber, using the SFP+ of your choice. It converts a copper RJ45 Ethernet connection to 10 Gigabit fiber, to extend your network over longer distances or connect workstations to switches. Cost-Effective Extensions and Flexible Performance : The RJ45 to fiber media converter provides a cost-efficient way to connect an Ethernet network to remote devices over a fiber backbone. It features an open SFP+ slot that supports the MSA-compliant 10 Gigabit SFP+ that best suits your fiber connection setup (single mode/multimode) and distance requirements. A Versatile Way to Connect Different Networks: The 10Gb fiber media converter supports auto-negotiation while providing versatile connectivity to existing networks and devices, maximizing the usage and performance of legacy equipment. Network Compatibility: 10GBASE-ER. 10GBASE-LR. 10GBASE-LW. 10GBASE-EW. 10GBASE-R. 10GBASE-SR. 10GBASE-SW. 10GBASE-T. Fast and Easy Installation: The unmanaged fiber media converter has a standalone compact design with simple plug-and-play setup to ensure fast and easy installation. StarTech.com Fiber Media Converters: Overcome the distance limitations of traditional network cables with StarTech.com fiber media converters. Our converters connect different types of network cabling and help you extend networks between buildings and over longer distances. Whether you need to extend a network connection 550 m or 40 km, we can help you. The MCM10GSFP Ethernet Fiber Media Converter is backed by a StarTech.com 2-year warranty and free North American based multilingual lifetime technical support..Convert between an RJ45 copper Ethernet connection and a fiber-optic connection to extend your network cost-effectively.Customize the network extension distance to your requirements with virtually any MSA-compliant multimode or single-mode transceiver using the open 10Gb SFP+ slot.10Gbps (10GBASE-T) compatible RJ45 port supports auto-negotiation.Install easily with compact and durable standalone design

PoE+ Industrial Fiber to Ethernet Media Converter 60W - SFP to RJ45 - Singlemode/Multimode Fiber to Copper Gigabit Ethernet - Compact Size - IP-30/ -40 to +75C (IMC1GSFP60W).EXTEND, CONVERT, POWER: Fiber to Ethernet media converter with PoE extends & converts fiber to RJ-45 copper; Provides up to 60W of PSE power to PoE/PoE+/PoE++ PD devices like cameras and sensors.FLEXIBLE POWER: Can be hardwired using terminal block (48-56VDC) power or powered using a standard Type-N barrel wall adapter (not included).OPEN SFP SLOT: Any MSA compliant SFP can be used for the incoming multimode or singlemode fiber connection; easy deployment across applications or fiber cable types.ROBUST DESIGN: Industrial Gigabit Media Converter w/MTBF 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing | Hardened operating temp -40C to 75C.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This media converter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.Industrial PoE Media Converter | 10/100/1000 Mbps | 60 Watts | Open SFP | DIN Rail Mountable

The Transition Networks® M/GE-PSW-SFP-01-NA mini GbE media converter provides cost-effective and entry level media conversion of 10/100/1000Base-T stand alone copper connection to 1000Base-X fiber connections. This hot swappable media converter has dual speed SFP port that supports autosensing 100 m or 1000 m SFP transceivers. The LEDs of the converter provide quick status information. This converter features auto-negotiation, auto-MDI/MDIX, automatic link restoration and fixed full duplex on fiber..Media converter provides cost-effective and entry level media conversion.Dimensions: 0.85"H x 1.8"W x 3.3"D.Comes in black color.Interfaces/ports: 1 x 10/100/1000Base-T RJ-45 to 100/1000Base-X SFP slot.Ethernet technology: Gigabit Ethernet.Power supply: Input: 4.5 VDC - 14 VDC, external AC/DC required, 12 VDC, 0.5 A, consumption: 2.4 W.Status LEDs: PWR (power) below RJ-45: On = Power, FX-link/act upper Left on RJ-45: On = link, TX-link/act upper right on RJ-45: On = link.Auto-negotiation, fixed full-duplex on fiber, auto-MDI/MDIX.Automatic link restoration, jumbo frame up to 10240 bytes.Temperature: 0 - 50 deg C operating, -15 - 65 deg C storage, humidity: 5 - 95% (non-condensing).Meets safety: Wall mount power supply, UL, cUL (Canada), FCC class A, CISPR22/EN55022 class A, EN55024, CE Mark standards.Weight: 2 lbs..Comes with lifetime warranty.Mini gigabit Ethernet media converter provides a cost-effective method for integrating fiber optic cabling into a 10/100/1000 UTP environment.

TRENDnet's Industrial SFP to Gigabit PoE++ Media Converter (95W), model TI-UF11SFP, converts a long-distance fiber connection to a copper connection while providing power to PoE, PoE+, and PoE++ compliant devices, such as IP cameras, VoIP phones, and wireless access points. This PoE++ media converter is IP50 rated with hardened components for extreme industrial environments and an operating temperature range of -40°- 75° C (-40° - 167° F). The front panel DIP switches control Link Fault Pass Through (LFPT), and setting the device to switch/converter mode. The industrial PoE++ media converter's rugged design also provides protection from shock, freefall, and vibration. DEVICE INTERFACE: 1 x Gigabit PoE++ port (100/1000Mbps); 1 x Gigabit SFP port (100/1000Mbps); 6-pin removable terminal block; LED Indicators; DIP Switch NDAA + TAA COMPLIANT: With NDAA and TAA compliant products, you can plan and install the networking solutions that government customers demand today. (U.S. and Canada only) RELIABLE TECH SUPPORT: Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers. PoE++ OUTPUT: Converts long-distance fiber to copper while providing up to 95W of power to PoE, PoE+ and PoE++ compliant devices, such as IP cameras and wireless APs. DIP SWITCHES: (1) LFPT (Link Fault Pass Through) on/off (default ON); (2) Converter and Switch mode on/off (default Converter mode) POWER SUPPLY SOLD SEPARATELY: Powers supply sold separately (model: TI-S15052) NDUSTRIAL DESIGN: Designed with a rugged IP50 rated housing, resistance to a high degree of vibration and shock, protection against ESD/EMI/surge, and operates within an extreme operating temperature range of -40° - 75° C (-40° - 167° F). FIBER NETWORKING DISTANCES: Up to 80km fiber networking distances with the TEG-MGBS80 SFP module LINK FAULT PASS THROUGH: Easily enable the LFPT (Link Fault Pass Through) feature on the industrial multi-mode media converter using the front panel DIP switch to identify a link fault to the remote LFPT enabled media converter SURGE PROTECTION: 6kV Ethernet surge protection DIN RAIL & WALL MOUNTS INCLUDED: IP50 rated metal enclosure with included DIN-rail and wall mount hardware GROUNDING POINT: Grounding point protects equipment from external electrical surges ELECTRO MAGNETIC COMPLIANCE: Complies with industrial EMS certifications ESD (IEC 61000-4-2); Contact: 6kV, Air: 8kV; EFT (IEC 61000-4-4): Power 2kV, Signal: 2kV; Surge (IEC 61000-4-5): Power: 2kV, Signal: 2kV.Includes DIN-Rail and wall mounts.Powers supply sold separately (model: TI-S15052).Overload current protection.6kV RJ45 surge protection.Operating temperature range of -40° - 75° C (-40° - 167° F)

Tripp Lite P137-06N-HV-V2W 6" Mini DisplayPort 1.2 to HDMI/HD-15 VGA Male/Female All-in-One Converter Adapter, White.All-in-one converter adapter is perfect for various laptop, tablet, monitors, projectors and televisions.Cable length: 6".Connectors: 1 x Mini display port 1.2 male on the first end, 1 x HDMI/1 x 15-pin HD-15 female VGA on the second end.Comes in white color.Supported resolution: 3840 x 2160.Ideal for trade shows, classrooms, lecture halls and other presentations, supports 36-bit deep color (12 bits per channel).System requires the connected computer to have a DP++ ( Displayport ++ ) port.Small size for easy carrying in laptop bag or briefcase, plug and play.Includes owners manual.RoHS compliant.Comes with 1 year limited warranty

The SBFTF1010-130 Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver that significantly reduces network down time by adding a new level of redundancy to 10/100 Ethernet connections. The Redundant Transceiver has three ports: one for the critical (main) device, one for the default (primary) path to the critical device, and another (backup) for the backup path. It is a smart device that will not send any signal on a path that is inactive. If the primary path loses its link, then the transceiver will switch to the backup path in approximately 189 milliseconds. When the primary path re-establishes its link, the Redundant Link Protector will automatically switch back to the primary path. Optional functionality, controlled via a dip switch, allows the unit to move from the fault-tolerant mode to a 3-port switch mode..Singlemode fiber with SC connector for long‑distance Ethernet transmission..Media converter providing redundant Ethernet link protection with automatic failover..Supports 10 Mbps and 100 Mbps Fast Ethernet speeds..20,000 meters (20 km) over singlemode fiber..Fully supports Ethernet (10/100BASE‑TX), but does not support Gigabit speeds..Operates with low power consumption of approximately 3 Watts..Offers high reliability with a Mean Time Between Failures of about 1,000,000 hours..Operates at 1310 nm wavelength optimized for singlemode fiber transmission..Lifetime Limited Warranty

The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Supports 1000Base‑LX singlemode fiber with a standard SC connector.Operates as a stand‑alone Gigabit Ethernet Media Converter that bridges 1000Base‑T copper ports to 1000Base‑LX fiber ports.Provides a full 1000 Mbps (1 Gbps) throughput, ensuring high‑speed performance.Extends network reach up to 10,000 meters (10 km) over singlemode fiber.Fully compliant with Gigabit Ethernet standards, supporting 1000Base‑T to 1000Base‑LX conversion for interoperability with modern switches.Operates efficiently with a typical power consumption of approximately 3 Watts.Engineered for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 1310 nm wavelength for singlemode fiber, the industry standard for 1000Base‑LX applications.Lifetime Limited Warranty

Further Details This tough media converter is the ideal way extend your network over fiber and also power a PoE device. Use it to link to faraway PoE devices such as IP security cameras, wireless access points, and VoIP phones. The media converter features two autosensing 10/100/1000 UTP ports plus one single-mode fiber port that can extend a network connection up to 15 kilometers (9.3 mi.). Both UTP ports supports 802.3at Power over Ethernet, enabling it to power a PoE+ PD device; the other is a straightforward Ethernet port, which can be used for network expansion. The Gigabit PoE+ Media Converter can be powered three ways: from an AC power supply (LGC5210-PS, order separately), via the DC power jack, or via the DC terminal block. When used with DC power to the terminal block, the converter supports an extended operating temperature range of +32 to +158° F (0 to +70° C). The converter requires only one power source to power both the converter and a PoE+ device; you can position the PoE+ device up to 100 meters (328 feet) away from the converter, enabling flexible placement of wireless APs and security cameras. A pair of input terminals and output terminals enables you to cascade DC power in a DIN rail installation (optional DIN Rail Clip (LXC-DR) is sold separately)..Acts as power sourcing equipment (PSE) on the copper side to power PoE devices..Both UTP ports are autosensing with Auto MDI/MDI-X; one UTP port supports 802.3at PoE+..Features two 10-/100-/1000-Mbps copper ports and one 1000Mbps fiber port.

The Black Box LinkGain Media Converter provides a reliable solution for extending network connectivity between copper and fiber environments. Featuring auto-sensing 10-/100-Mbps copper ports with MDI/MDI-X support, it ensures seamless integration and flexibility. Link Fault Pass Through (LFP) enhances network resilience by shutting down a link if the opposite side fails. Designed for versatility, it can be used as a standalone unit or rack-mounted in a 16-slot LinkGain chassis. With plug-and-play installation, this converter simplifies deployment for fast, efficient network expansion..Auto-sensing 10-/100-Mbps copper ports feature MDI/MDI-X..Link Fault Pass Through (LFP) shuts down a link if the other side fails..Use as a standalone unit or rackmount in the 16-Slot LinkGain Chassis..Plug-and-play installation.

Features The Axiom 100Mbps POE (PSE) Series are a 10/100Base-TX to 100Base-FX media converter, which allows two types of network segment to be connected easily. Compliant with IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feet). Features: 10/100Base-TX UTP to 100Base-FX fiber media conversion IEEE802.3af PoE PSE compatible Built-in AC/DC power supply Over-current protection DIP switch to set different configurations LFP (Link Fault Pass-through) support.Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.With 100Base-LX technology get up to 100Mbps data transfer rate over optical fiber cable.Ensures reliable performance for everyday use

Conveniently connect your multimedia storage devices to your adaptor using this 3' DisplayPort male to DVI-D male converter cable. This cable connects a 20-pin DisplayPort male digital audio and video connector and a 25-pin DVI-D male digital video connector. This converter is easy to use and with a plug-and-play cable adapter..DisplayPort/DVI for Video Device, Monitor, Projector, Ultrabook.3 ft.1 Pack.1 x DisplayPort Male Digital Audio/Video.1 x DVI-D Male Digital Video.Gold Plated.Black.Temperature: 5 - 35 deg C (operating), 0 - 70 deg C (storage), Humidity: 20 - 80% RH.Compact 3' adapter cable can reduce clutter.Easy to use.Hassle-free setup with plug-and-play cable adapter.Meets RoHS compliant.Weight: 1.2oz..2 year warranty.This black 3' DisplayPort male to DVI-D male converter cable connects DisplayPort equipment to a DVI monitor or projector.

The Tripp Lite 6" black DisplayPort 1.2 to DVI active converter turns a DisplayPort 1.2 video signal to project on a DVI monitor or television. It is compatible with all DisplayPorts and supports UHD video resolutions up to 1920 x 1080. This converter converts both single-mode and dual-mode DisplayPort output. It features gold-plated connectors and contacts for better conductivity. This converter works well with graphics cards that do not output DP++ signals, such as AMD Eyefinity. The plug-and-play connection ensures easy installation and compact design for better fit into briefcase, backpack or laptop bag for easy carry..DisplayPort 1.2 to DVI active converter converts a DisplayPort 1.2 video signal for display on a DVI monitor, projector or television.Cable length: 6".Connections type: Connector A: DisplayPort (male), Connector B: DVI-I dual-link (female).Gold-plated connectors and contacts for excellent conductivity.Color: Black.Supported resolution: 1920 x 1200.Device supported: Video device, monitor, projector, TV and graphics card.Great for displaying video on large monitor or digital sign and is backward compatible with previous DisplayPort generations.Supports HD video resolutions up to 1920 x 1080 (1080p).Converts both single-mode as well dual-mode DisplayPort output and works with graphics cards that don't output DP++ signals such as AMD Eyefinity.Features: Integral strain relief for long life, plug-and-play installation requires no software and fits easily into briefcase, backpack or laptop bag.Contains 6" P134-06N-DVI-V2 DisplayPort 1.2 to DVI active converter (M/F).RoHS and Green Compliant.Comes with 1 year limited warranty

SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media converter that enables enterprises to provide power to network devices over the existing CAT5 data connection. Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with -48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities. In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset.) The PoE converter is fully compatible with devices that comply with the IEEE 802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI..Expand your network capabilities with this 2 transceiver/media converter.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With 10 /100 Base-TX technology get up to 100 Mbps data transfer rate over optical fiber cable.With Wall mounting feature, you can conveniently install the device while keeping the wires and cables organized

4XEM™ USB 3.0 to gigabit ethernet adapter supports 10/100/1000Base-T network technology. Adapter weighs about 0.95 oz and is compatible with all types of PCs..Network adapter interface: USB 3.0.Interfaces with USB 3.0.Dimensions: 2.6"(H) x 1"(W) x 1"(D).Ports: 1 x RJ-45 network port.Media and performance: Twisted pair cable.Network and communication: 10/100/1000base-T.Device supported: PC, Mac.Compatible with USB 3.0.USB 3.0 to gigabit ethernet NIC network adapter adds a single RJ-45 ethernet port to a USB-enabled computer system.Package includes: USB 3.0 to gigabit Ethernet NIC network adapter.Standards and certificates: CE, FCC, IEEE Standards: 802.1q, 802.3, 802.3i, 802.3u, 802.3ab, 802.3az, RoHS.Warranty: 3 years limited.4XEM™ USB 3.0 to gigabit ethernet adapter adds a single RJ45 ethernet port to a USB-enabled computer system and supports twisted pair media type.

TRENDnet's Industrial 100/1000Base-T to SFP Media Converter, model TI-F11SFP, is a reliable IP50 rated media converter with hardened components rated for extreme industrial environments. The front panel DIP switches control Link Fault Pass Through (LFPT), and setting the device to switch/converter mode. DEVICE INTERFACE: 1 x Gigabit Port; 1 x Gigabit SFP Port (100/1000Mbps); 3-Pin Removable Terminal Block; LED Indicators; DIP Switch NDAA + TAA COMPLIANT: With NDAA and TAA compliant network products, you can plan and install the networking solutions that government customers demand today. (U.S. and Canada only) RELIABLE TECH SUPPORT: Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers. INDUSTRIAL HARDENED DESIGN: Equipped with a rugged IP50 rated housing, designed to withstand a high degree of vibration and shock, and operate within an extreme temperature range of -40° - 75° C (-40° - 167° F). POWER SUPPLY SOLD SEPARATELY: 12 - 60V DC power input with overload current protection. Use this industrial sfp media converter with the compatible power supply. Model TI-M6024 (Sold Separately) SWITCH MODE TO CONVERTER MODE: This device can be set to be used in switch mode or converter mode. DIP SWITCHES: 1: Turns LFPT (Link Fault Pass Through) on/off 2: Converter mode / switch mode SURGE PROTECTION: 6kV Ethernet surge protection NETWORKING DISTANCES: Up to 80km fiber networking distances with the TEG-MGBS80 SFP module.Powers supply sold separately (model: TI-M6024).Includes DIN-Rail and wall mounts.12 - 60V DC power input with overload current protection.6kV RJ45 surge protection.Operating temperature range of -40° - 75° C (-40° - 167° F)