Electronics Media Converters

Features The Axiom POE+ (PSE) Series are a 10/100/1000Base-TX to 1000Base-FX (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Compliant with IEEE802.3at standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, providing power to or IEEE802.3at powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feet). Features: 10/100/1000Base-TX UTP to 1000Base-FX fiber media conversion IEEE802.3at PoE+ PSE compatible Built-in AC/DC power supply Over-current protection DIP switch to set different configurations LFP (Link Fault Pass-through) support.Connect different types of media within a network with this single port.With 10/100/1000Base-TX technology get up to 1000Mbps data transfer rate over twisted pair cable.Ensures reliable performance for everyday use

Convert and extend a Gigabit Ethernet connection up to 10km over single-mode SC fiber - Provides a cost-effective Ethernet copper to fiber or fiber to copper link - LFP mode on fiber/copper sides - Compact design and wall mountable with easy installation - SC connection (fiber) and RJ45 connection (copper) - Fiber to Ethernet Converter / Fiber to Copper Converter / Fiber optic media converter / Fiber to Ethernet Media Converter / Media converter fiber to Ethernet.Converts and extends a Gigabit fiber (1000 Mbps) network over single-mode fiber on 1000BASE-LX networks.Provides a cost-effective Ethernet to fiber/copper to fiber link.Supports a maximum distance of 10 km over single mode duplex fiber optic cable (SC connection).Compact design and wall mountable.Non-blocking full wire-speed forwarding rate.LED Indicators for simple Ethernet/fiber network link monitoring.1310 nm wavelength.Supports IEEE 802.1q Tag VLAN pass through.Convert and extend a Gigabit Ethernet connection up to 10 km over single-mode SC fiber

The BLACK BOX® Universal RS-232 to RS-422/485 Converter with Opto-Isolation isolates and converts RS-232 signals into RS-422/RS-485 signals and vice versa. Unlike other converters, external software is not required to control data flow. The RS-232 input is wired for DCE through a DB9 female connector, and RS-422/RS-485 signals are interfaced through a removable terminal block. To supply external power to the terminal block, you need our 120-VAC/12-VDC Wall mount Power Supply (PS1003). For RS-232, the connection requires RD, TD, and Signal Ground. In RS-422 mode, the driver is always enabled for full-duplex communications. A twisted pair is required for transmit, and a twisted pair is also required to receive. A ground reference wire is also needed. Switch settings are Switch 1: RS-422; Switch 2: Echo On; Switches 3 and 4: 4 Wire. In both RS-485 modes, the RS-485 driver is automatically enabled during each space state by the presence of an RS-232 signal. When the RS-232 data is in a mark or idle state, the RS-485 driver is disabled and the RS-485 data lines are held in a mark state by the bias provided by a 4.7-ohm resistor; the value of this resistor may need to be changed, depending on the termination you use. To connect to several RS-485 devices with minimal wire, select the unit's 2-wire, half-duplex RS-485 mode. When data is requested, the addressed device transmits and then reverts back to receive status. Switch settings for this mode are Switch 1: RS-485; Switch 2: Echo Off; Switches 3 and 4: 2 Wire. For 4-wire master/slave circuits, select the unit's 4-wire, full-duplex RS-485 mode. In this mode, addressed devices can receive data while transmitting data from a previous request. When used as a master in a single-master system, Switch 1 may be selected because the unit is the only transmitter in the system. When used as an RS-485 slave, the RS-232 device must provide addressability. Biasing in a master/slave system is provided by the end-of-line slave. Switch settings for this mode are Switch 1: RS-485; Switch 2: Echo On; Switches 3 and 4: 4 Wire..Operates 2-wire half-duplex or 4-wire half- or full-duplex..async (data leads) only..Up to 32 RS485 devices can be attached to create a large multi-drop network.Operates in point to point or multipoint applications.Transmit data up to 115 kbps or at distances up to 4000 ft.

Extend your network Meet your massive networking needs. This media converter lets you extend your copper-based network via fiber to a maximum distance of 80 km through the use of an SFP. Also, it's quick and easy to install. Support multiple standards It meets the standard you need it to. It's fully compliant with IEEE802.3, IEEE802.3U, 10/100/1000BASE-TX, and 1000BASE-FX standards. Status updates Know how your media converter is performing. Operation status can be locally monitored through a set of diagnostic LEDs located on the front panel..Extend a copper-based network via fiber for a maximum distance of 80 km.Quick and easy installation.Diagnostic LEDs on the front panel.One RJ45 connector.One SFP slot

The Tripp Lite 6" black active converter features gold-plated connectors/contacts for optimum conductivity and integral strain relief for long life. It converts a DisplayPort 1.2 video signal for display on a VGA monitor, projector or television. This converter is perfect for displaying video on large monitor or digital sign. It supports HD video resolutions up to 1920 x 1080 and computer video resolutions up to 1920 x 1200. This converter works with graphics cards that do not output DP++ signals. This converter is backward compatible with previous DisplayPort generations..Active converter is perfect for displaying video on a large monitor or digital sign.Cable length: 6".Connections: One DisplayPort 1.2 male digital video on first end, one 15-pin HD-15 VGA female on second end.Connector finish: Gold-plated connectors and contacts.Compatibility: monitor, projector, television, graphics cards, video device.Supported resolution: 1920 x 1200, 1920 x 1080 (1080p).Color: Black.Backward compatible with previous DisplayPort generations and converts both single-mode as well dual-mode DisplayPort output.Works with graphics cards that don’t output DP++ signals while integral strain relief ensures the converter and molded connectors last a long time.Plug-and-play requires no software, drivers or power supply necessary for reliable operation.RoHS Compliant.Comes with 1 year limited warranty

Send a video signal from a tablet, laptop computer, or another source device with a DisplayPort output port to a projector, monitor, or HDTV with an HDMI, DVI or VGA input port. This compact all-in-one converter is an ideal solution for use in schools, conference rooms, or other work spaces that may utilize assorted displays with varying inputs in multiple rooms throughout a building..The DisplayPort to HDMI, VGA, or DVI adapter allows you to connect a DisplayPort equipped laptop or tablet to a projector, monitor, or HDTV with an HDMI, VGA, or DVI input port.Inputs: DisplayPort male.Outputs: DVI female, HDMI female, VGA female.Does not require drivers for installation; the device is powered through DisplayPort bus power, so no additional power adapters are needed.The dongle-style adapter converter reduces strain on the video port..The cable between the DisplayPort connection and the adapter converter provides strain relief that protects the port from strain damage as cords are moved.Supports VGA resolutions up to 1920 x 1080 at 60Hz; DVI resolutions up to 1920 x1080 at 60Hz; HDMI resolutions up to 3840 x 2160 at 30Hz.3-year manufacturer limited warranty

Transparently connect fiber to copper to power PoE+ devices at the edge of your network. Use the Converter to connect PoE+ devices such as PTZ (pan, tilt, zoom) cameras, 802.11n access points, VoIP phones, and more that require up to 30 watts of power. The Converter acts as a Power Sourcing Equipment (PSE) to push data and power over copper cable to the remote, Powered Devices (PDs). The Media Converter features one autosensing 10/100/1000-BASE-T UTP port plus an SFP port that can be used for multimode and single-mode 1000BASE-X fiber connections. It is powered via an external AC adapter, which delivers 47~57 input power voltage. The Converter features advanced functions such as auto-negotiation, Auto-MDIX, Link Lost Forwarding, and Link Fault Pass-Through for easy system management and troubleshooting. LEDs indicate Converter activity. This product is covered by one of more of the following: United States Patent Nos. 7,457,250; 8,902,760; and/or 9,019,838..Copper port supports full-duplex, auto-MDI/MDI-X, and auto-negotiation.Link Loss Forwarding provides instant notification of fiber segment link problems.Compatible with 802.3af/at standard PoE devices.Power sourcing equipment (PSE) on the copper side to provide up to 30 watts of power.Provides one 10-/100-/1000-Mbps copper port and one 1000Mbps SFP port

Operates in half-duplex over two wires. Works with or without transmit "echo." The converter's RS-232 side has a DB9 female connector configured as DCE. The converter's RS-485 side has a terminal block. Also available in four other configurations. See Similar Products. The Async RS-232 to RS-485 Interface Bidirectional Converter, DB9 Female to Terminal Block features a DB9 female connector on the RS-232 side, and a terminal block on the RS-485 side. It converts your unbalanced RS-232 signals to balanced half-duplex RS-485 signals..Up to 32 RS485 devices can be attached to create a large multi-drop network..Async (data leads) only..2-wire operation half-duplex only..Operates in point to point or multipoint applications..Transmit data up to 115 kbps or at distances up to 4000 ft.

Convert async RS232 to RS422/485 at speeds up to 19.2 kbps with distances up to 4000 ft over CATx cables. These devices are great for connecting RS232 devices into an existing RS422/485 environment in factory automation, building automation, and process automation. They can be mounted using DIN Rail and can withstand operating temperatures of -40 to 176 degrees F (-40 to 80 C)..Optically isolates and converts unbalanced half- or full-duplex RS-232 signals to optically isolated and balanced full-duplex RS-422 or 2-wire half- or 4-wire full-duplex RS-485..Powered by 10-30 VDC, 100 mA.2-wire half-duplex or 4-wire full-duplex, RS-422 Full-duplex.Async (data leads) only..Withstands operating temperatures of -40 to 176 degrees F (-40 to 80 C).

10/100/1000BASE-T to 1000BASE-X 802.3af/at Easily convert 10/100/1000BASE-T to 1000BASE-X 802.3af/at Ethernet with this PoE converter. Know link media issues immediately Features helpful Link Fault Pass-Through (LFP) functionality. LFP immediately alarms administrators to the problem with the link media and provides an efficient solution to monitor the net. Know where connections are down Link Loss Carry Forward (LLCF) informs you of failing links. LLCF means when a device connected to the converter and the TP line lose the link, the converter's fiber will disconnect the link of transmit..Converts 10/100/1000BASE-T to 1000BASE-X 802.3af/at Ethernet.One RJ45 twisted-pair jack, one fiber-optic connector and four LED indicators.Link fault pass-through functionality.PoE function.Link Loss Carry Forward and Link Loss Return functionality

Features The Axiom Mini SFP to SFP Optical Mode Converter is a high-performance 125M~1.25G optical signal repeater Using Optical - Electrical - Optical (OEO) wavelength conversion and offers protocol transparent connectivity between different wavelengths or fiber modes for speed from 100Mbps to 1250Mbps. Protocol independence allows for use in broad range of applications including Fast Ethernet, Gigabit Ethernet, OC-12 and Fiber Channel. SFP to SFP optical mode converter Supports rate from 100Mbps to 1.25Gbps Supports multimode and single-mode Jumbo frame Support Compact package size.With 100/1000Base-X technology get up to 1000Mbps data transfer rate over supported network cable.Optimized for reliable and consistent performance.Enhances productivity with user-friendly features.Engineered for superior quality and dependability.Compact design saves space without compromising functionality

The Omnitron 01-01-7207 SFP optical transceiver enables a single network device to connect to a wide variety of flexible fiber and copper cable through its interchangeable, compact media connectors. It is compatible with iConverter®, FlexPoint™, OmniConverter™ and miConverter™ products to meet specific network protocols and media requirements. This transceiver supports digital diagnostic by providing enhanced diagnostic information. The compact design and the ease of interchangeability of this unit provide a flexible solution for network designs..Optical transceiver module is compatible with iConverter media converter modules, T1/E1 multiplexers and network interface devices.LC duplex 1000Base-LX network.Media type supported: Optical fiber, fiber mode supported: Single-mode, fiber optic cable standard: 9/125 ohm m.Form factor: Hot-pluggable, hot-swappable, data transfer rate: 1.25 Gbps.Compatible with FlexPoint, OmniConverter and miConverter media converter modules that support SFP transceivers.Compliant with IEEE 802.3u fast Ethernet and 802.3z gigabit Ethernet specifications.Supports operational data rates for SONET OC-3/12/48, SDH STM-1/4/16 and fiber channel x1/x2.Supports a wide variety of cable types, supports digital diagnostic capability, low EMI metal enclosure.Temperature: 0 to 50 deg C commercial, -40 to 80 deg C storage.Meets RoHS, Green, WEEE standards.Comes with 1 year warranty.Certifications and standards: Compliant with MSA SFF-8472 standard.OMNITRON SYSTEMS iConverter 1000Base-LX SFP Optical transceiver supports data transfer rate of 1 Gb/s and is suitable to use with networking applications.

The Manhattan® SuperSpeed+ 152051 converter in black, helps to connect USB-C 3.1 source to DVI display. This converter with 3" cable, is compatible with USB type C supported desktops, Notebooks and tablets including Apple Macbook, Chromebook Pixel. The plug-and-play converter has ABS plastic construction with Mylar and aluminum shielding to minimize EMI and other interference. It works with Windows XP/Vista/7/8.1/10, Linux and Mac 9.x/10.x operating systems..DVI converter.Cable length: 3".Connections: USB type C 24-pin male on first end, DVI 24-pin female on second end.Gauge: 32 AWG.Made from ABS plastic, Mylar and aluminum shielding, thermal plastic casing, molded PVC boot.System requirements: Windows XP/Vista/7/8.1/10 or Linux or Mac 9.x/10.x or above.Video resolutions: 4K.Plug-and-play.Fully shielded to reduce EMI and other interference sources.Temperature: 32 to 122 deg F (operation), -4 to 185 deg F (storage).Includes SuperSpeed+ USB 3.1 to DVI converter.Meets CE, FCC, RoHS2 and WEEE standards.Weight: 1.1 oz..Comes with lifetime warranty.Manhattan® SuperSpeed+ black DVI converter connects USB type-C source with a DVI display.

This is a media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-X via an open SFP port connector. The open SFP port allows users to customize between the SX, LX, or BX connections. This media converter provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 1000Base-X, while extending the network reach beyond the 100m reach limitation of copper. This AC/DC powered PoE+ media converter is a Power Sourcing Equipment (PSE), which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, 30 watts max, providing power to IEEE802.3at powered device (PD) over CAT5 and up UTP cable (cable length up to 100 meters / 330 feet). It complies with the IEEE802.3at standard. The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection and LFP function. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Our media converters and network interface cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs..Attach multiple devices together or expand the number of devices connected to your existing network by using 2 transceiver/media converter.With 10/100/1000Base-TX technology get up to 1000Mbps data transfer rate over twisted pair cable.Ensures reliable performance for everyday use

This compact fiber media converter transforms 1000BASE-T (Copper Gigabit) media to 1000BASE-SX/LX (Fiber) SFP media and vice versa. The 1000BASE-T RJ-45 port supports a full-duplex Gigabit connection at wire speed. The SFP slot supports both multimode (SX) or single-mode (LX) SFP modules. Dual-Speed SFP Slot: Dual-speed SFP slot supports both 100 Mbps and 1000 Mbps SFP modules. Power Adapter: Included power adapter for standalone use. Compact: Small and compact metal housing design provides greater installation flexibility. Network Ports: 1 x 10/100/1000 Mbps RJ-45 copper port and 1 x 100/1000 Mbps dual-speed SFP slot Switching Capacity: 4 Gbps switching capacity Jumbo Frame: Sends larger packets, or jumbo frames (up to 9 KB), for increased performance.With Twisted Pair cable, get the desired data transfer rate up to a required distance.With 1000Base-T technology get up to 1000Mbps data transfer rate over twisted pair cable.Official TRENDnet Branded Product

The Ubiquiti Instant INS-3AF-I-G indoor Gigabit PoE converter for 802.3af switches, transforms any Ubiquiti PoE devices into a fully compliant 802.3af compatible product. It works with 10/100/1000 Mbps ports to deliver high throughput speeds over a wired connection. This instant 802.3af adapter supports longer cable runs for more efficient power delivery. The device provides an additional +/-15 kV of Ethernet isolation for built-in protection or surge protection. It is compatible with airMAX and UniFi devices..Indoor Gigabit PoE converter transforms passive PoE devices into 802.3af-compliant products.Dimensions: 3.76"D x 1.19"Dia. (with RJ45 cable).Compatibility: 802.3af switches for remote control power applications.Protection type: Surge protection.Interfaces/ports: 1 x Gigabit RJ45 port (PoE in), 1 x Gigabit RJ45 port (PoE out).Network and communication: 10/100/1000Base-T.Power: 48 VDC input, 24 V, 0.5 A output.Form factor: External.Enables longer cable runs due to a more efficient power delivery.Provides an additional +/- 15 kV of Ethernet isolation to lessen the risk of ESD or surge damage to connected devices.Weight: 1.76 oz.

Features The Axiom 10G SFP+ to SFP+ Optical Mode Converter provides a flexible transmission of various protocols, such as 1G/10G Ethernet, SDH STM16/STM64, OTU1/ OTU1e/OTU2/OTU2e, Fiber Channel 2/4/8/10, OBSAI, CPRI, etc. Using SFP+ ports with dedicated CWDM or DWDM wavelengths, the 10G Fiber to Fiber Converter supports multi-rate functionality with optical data rates from 1Gbps up to 10Gbps. With its functionality transponder is also suitable as a repeater for transmission over extended distances. In addition, the use of state of the art components greatly reduces the power requirements and heat dissipation factors over our previous transponders. Features: Supports 10Gbase-SR/LR/ER/ZR/LRM to 10Gbase-SR/LR/ER/ZR/LRM Supports 10Gbase LAN (10.3125 Gbps) and WAN (9.95328 Gbps) 3R function, stable data transmission Short delay time when transparent transmission Jumbo Frame Support Supports DOM (Digital Optical Monitoring) function of optical transceivers Supports 850nm, 1310nm, 1550nm and DWDM/CWDM wavelength ruled by ITUT Unit and Port LEDs allow for quick status information Support 1U Rack (12 channel) and Standalone use Compact package size, easy installation.With 10GBase-X technology get up to 10Gbps data transfer rate over supported network cable.Rack mountable feature for convenient and safe installation of device.Ensures reliable performance for everyday use

The Ubiquiti Instant INS-3AF-O-G outdoor Gigabit PoE converter for 802.3af switches, transforms any Ubiquiti PoE devices into a fully compliant 802.3af compatible product. It works with 10/100/1000 Mbps ports to deliver high throughput speeds over a wired connection. This instant 802.3af adapter supports longer cable runs for more efficient power delivery. The device provides an additional +/-15 kV of Ethernet isolation for built-in protection or surge protection. It is compatible with airMAX and UniFi devices..Outdoor Gigabit PoE converter transforms passive PoE devices into 802.3af-compliant products.Dimensions: 14.4"D x 1.19"Dia. (with RJ45 cable).Compatibility: 802.3af switches for remote control power applications.Protection type: Surge protection.Interfaces/ports: 1 x Gigabit RJ45 port (PoE in), 1 x Gigabit RJ45 cable (PoE out).Network and communication: 10/100/1000Base-T.Power: 48 VDC input, 24 V, 0.5 A output.Form factor: External.Enables longer cable runs due to a more efficient power delivery.Provides an additional +/- 15 kV of Ethernet isolation to lessen the risk of ESD or surge damage to connected devices.Weight: 3.17 oz.

Separate DVI, HD15 and HDMI female connectors.HDMI port supports UHD 4K x 2K video resolutions @ 60 Hz.Supports HDMI 20 and HDCP 22.Plug and play-no software, drivers or power supply needed.Small size for easy carrying in laptop bag or briefcase.Black

Features: Instantly Connect to a Gigabit Network on Your Laptop or Desktop Computer Tripp Lite's U436-06N-GB USB-C Network Adapter lets you instantly connect a USB-C or Thunderbolt 3 device to a Gigabit Ethernet network using a single Ethernet cable. This small-but-powerful adapter connects directly to your device's USB-C or Thunderbolt 3 port with no software, drivers or external power required. Simply plug it in, connect it to your network, and you're ready for action. With the reliability of a wired connection, you can transfer large amounts of data with confidence-or stream audio and video without fear of interruption. Enjoy Fast, Simple Connections Every Time Unlike traditional USB cables that can only be attached one way, the U436-06N-GB's reversible Type-C connector plugs into your device's USB-C or Thunderbolt 3 port in either direction. No more fumbling around with cables, trying to get the right connection. With plug-and-play installation, the user-friendly U436-06N-GB gets you up and running quickly with an instant USB network connection. It works with Windows, Mac and Chromium operating systems and is backward compatible with previous USB generations. Access True Gigabit Speeds Without an Ethernet Card This USB to LAN converter delivers full 10/100/1000 Mbps network speeds without requiring you to install an internal Ethernet card in your device. It's a convenient and affordable way to expand the potential of your PC, laptop or tablet. Take It with You Wherever You Go About the size of a credit card, the U436-06N-GB is small and lightweight enough to be taken with you wherever you go. Its ultra-compact design fits easily into a laptop bag, briefcase, or even your pocket..Provides instant access to Gigabit speeds without an internal Ethernet card.Simplified connections with a reversible Type-C connector that plugs into your device's port in any direction.Easy to install with plug-and play operation-no software or drivers required.Ultra-compact design for easy transport

Omnitron Pluggable optical transceiver operates at 850 nm wavelength and covers a maximum distance of up to 1800'. Transceiver is compatible with iConverter media converter modules, T1/E1 MUXes and network interface devices..Interfaces/ports: 1 x LC 1000Base-SX.Connectivity media: Multi-mode optical fiber.Ethernet technology: Gigabit Ethernet.Form factor: Plug-in module.Data rate: 1 Gbps.Cable distance: 550 meters.Wavelength: 850 nm.Application/usage: Data networking.Connectivity technology: Wired, Min. Tx Power (dBm): -9.5, Max. Tx Power (dBm): -4,Min. Rx Sense (dBm): -17, Max. Rx Power (dBm): -3, Link budget (dBm): 7.5.Low EMI metal enclosure, supports a wide variety of cable types.Digital diagnostic capability.Pluggable optical transceivers enable flexible fiber and copper connectivity.Warranty: Lifetime.Omnitron Pluggable optical transceiver transfers data at a rate of 1 Gb/s and enables a single network device to connect to a wide variety of fiber optic cable types.

This Cisco® SFP-10G-SR-S compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Cisco SFP-10G-SR-S Compatible.10GBase-SR SFP+ Transceiver.Media Type: MMF - Wavelength: 850nm - Reach: 300m - Connector Type: LC.100% application tested and guaranteed compatible.Limited Lifetime Warranty.Cisco® SFP-10G-SR-S Compatible TAA Compliant 10GBase-SR SFP+ Transceiver (MMF, 850nm, 300m, LC, DOM)

The SGFEB provides a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment. Deploying fiber into today's networks provides the ability to transmit data over significantly longer distances than is possible on copper. Fiber also protects your data from external sources of noise and interference, improving network performance..Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over optical fiber cable

Enhances productivity with user-friendly features.Engineered for superior quality and dependability.Compact design saves space without compromising functionality.Supports efficient operation for demanding environments

The ION S3220 is a stand-alone managed Network Interface Device (NID) that provides an interface between 10/100/1000Base-TX ports and 1000Base-SX/LX ports, allowing users to manage their links while integrating fiber optic cabling into 10/100/1000 copper environments. As a remotely managed device, the S3220 can be managed individually via an IP address or it can be managed in-band, over the fiber when linked to a C3220 card installed in a managed ION chassis. With advanced features like IEEE 802.3ah Link OAM, VLAN, QoS, SSH/SSL, jumbo frame support, and bandwidth allocation, the S3220 offers a variety of methods for the secure delivery of Ethernet services in business and mobile backhaul applications..MEF 9, 14 and 21 certified.802.3ah Link OAM.10K Jumbo Frame Support.Built on 32 nm technology and uses a high-k metal gate to enable higher performing transistors on the same node reducing leakage of currents

The SGPAT10xx-105 is a 10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, which easily and affordably facilitates the connection between different types of network cabling, while also injecting PoE+ power through the copper RJ-45 port. Being a Power Sourcing Equipment (PSE) device, the SGPAT media converter combines data received over a fiber optic link with 56VDC input power to provide power and data to a Powered Device (PD) over twisted pair cabling while complying with the IEEE 802.3at PoE+ standard, which is also backwards compatible with the IEEE 802.3af PoE standard. The converter is available in 2-port, 3-port, and 4-port versions and includes PD signature sensing and power monitoring features. Other features include over-current protection, under-current protection, and fault protection input. Active Link Pass Through (ALPT) is supported, which is an automatically activated version of Link Pass Through (LPT) that allows the converter to detect the loss of Receive (Rx) signals on either fiber or copper port and propagate the failure to the end devices, preventing the media converter from isolating those link failures. During a Link Pass Through event, the Auto Power Reset feature will re-set the power to the end PD device, ensuring it is ready to go when the LPT event is corrected..Wall mount, DIN Rail, or table top installation.External AC/DC power supply included with country specific power cord.2-port 10/100/1000 copper to fiber media conversion with IEEE 802.3at PoE+ on the copper port.Supports full 30 Watts of power to each twisted pair port.Various fiber versions available supporting fixed SC, fixed LC, and open SFP slots

Add reliable and cost-effective 10 Gigabit Ethernet connections over multimode fiber with this SFP+ module. This StarTech® 10 Gigabit fiber SFP+ is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco® switches and routers that support the Cisco SFP-10G-SR-S SFP+ transceiver module, as well as other major brands of networking equipment. This 10GBase-SR SFP+ delivers 10 Gigabit connectivity over multi-mode fiber cable with a range of up to 300 m (984 ft). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This 10 GbE SFP+ is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco and other major brands This 10 Gigabit multi-mode SFP+ is engineered to the highest quality standards and is 100% Cisco compatible, equivalent to the Cisco SFP-10G-SR-S SFP SFP+ transceiver. The StarTech® SFP+ is configured and fully tested to ensure it works seamlessly with HP or other major brands of networking equipment. You can be assured that the use of StarTech® SFP+ products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber SFP+ transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a wide range of 10 Gigabit networking devices. Ideal for use in Cisco switches, routers and other networking equipment, the SFP+ optical transceiver provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The multi-mode fiber transceiver module supports Digital Diagnostics Monitoring (DDM), a maximum distance of up to 300 m (984 ft), and maximum data rates of up to 10Gbps. You can count on SFP10GSRSST for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco SFP-10G-SR-S guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.3 W.Hot-swappable with fiber-optic modules

The StarTech® SFP10GLRST 10 Gigabit fiber LC SFP+ transceiver module offers reliable 10 Gigabit Ethernet connections for 10GBase-LR compliant networks. This Gigabit SFP+ module ensures maximum performance and easily installs into Cisco® switches. This transceiver module measures 2.2" x 0.5" x 0.5" and is compatible with 10 Gigabit fiber networking equipment as well as media converters. It has aluminum construction with zinc-plated casing enclosure for added protection. It has LC duplex 10GBase-LR network port for connectivity and supports single-mode optical fiber media to transfer data at 10 Gbps up to a distance of 10 km..100% compatibility with Cisco SFP-10G-LR guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.3 W.Hot-swappable with fiber-optic modules

TRENDnet's 1000Base-LX Industrial SFP Single -Mode LC Module, model TI-MGBS20, is designed to operate within an extreme temperature range and is well suited for industrial environments. This industrial SFP module works with standard SFP slots found on industrial switches and fiber media converters. The TI-MGBS20 industrial SFP is compatible with duplex LC fiber connector types and supports gigabit single- mode fiber connections at distances of up to 20 km (12.42 mi.). DEVICE INTERFACE: SFP MSA Compliant; LC Duplex Connector; Low Electromagnetic Interference (EMI) Design LIFETIME PROTECTION -We stand by the quality of our products. The TI-MGBS20, 1000Base-LX Industrial SFP Single- Mode LC Module (20km) is secured with Lifetime Manufacturer Protection from TRENDnet. (U.S. and Canada Only) NDAA + TAA COMPLIANT: With our NDAA and TAA compliant 1000Base-LX Industrial SFP Single- Mode LC Module , you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only) DATA RATES & RANGE: SFP module supports data rates up to 1.25Gbps with transmission distances of up to 20km (12.42 Miles) EXTREME OPERATING TEMPERATURE: The industrial SFP is rated for an extreme operating temperature range of -40°- 85° C (-40° - 185° F) INTERFACE & COMPATABILITY: The SFP module is compatible with duplex LC fiber connector types. Hot-pluggable with an MSA compliant SFP slot, and compatible with fiber cables with LC-type duplex connectors. FIBER APPLICATIONS: This industrial SFP LC module can be used for long distance fiber networking for industrial, manufacturing, corporate, and school campus applications. Easy plug and play installation. FIBER WAVELENGTH: Compatible with single mode 1310nm wavelength IEEE 802.3z Gigabit Ethernet & ANSI Fiber Channel Compliant. Also compliant with Small Form-Factor Pluggable (SFP) Multi-Source Agreement (MSA) More from the Manufacturer.ANSI Fiber Channel compliant.Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant.Extreme operating temperature range of -40°- 85 ° C (-40° - 185 ° F).Supports data rates of up to 1.25Gbps

Startech.com® SFP+ Hot pluggable transceiver module sustain data rates up to 11.1 Gbps and DDM while it can be installed on any fiber networking cable. Module does not require any rebooting and support a distance of 300m..Interfaces/Ports: 1 x 10GBase-SR.Dimensions: 0.4inch(H) x 0.5inch(W) x 2.4inch(D).Compatibility: MSA compliant.Interfaces/ports details: 1 x LC female 10GBase-SR network.Wavelength: 850 nm.Fiber operating mode: half/full-duplex.Fiber type: Multi-mode.Maximum data rates up to 11.1 Gbps.Operating temperature: 0 to 70 deg c, storage temperature: - 40 to 85 deg c, operating humidity: 30 to 70% RH.Local unit connectors: 1 - fiber optic LC female.Warranty: 3 years limited.Startech.com® SFP+ Transceiver module is a compact set used for both telecommunication as well as data communication applications while it upgrades a 10Gb SFP+ multimode LC port on fiber media converter.

INCLUDED: (Qty 4) TEG-MGBS10 10km (6.2 Miles) SFP Single-Mode LC Modules DATA RATES & RANGE: SFP modules support data rates up to 1.25Gbps with transmission distances of up to 10km (6.2 Miles) INTERFACE & COMPATABILITY: Mini-GBIC Single Mode modules have LC Type Duplex connectors. Hot-pluggable with an MSA compliant SFP slot, and compatible with fiber cables with LC-type duplex connectors. FIBER APPLICATIONS: These LC modules can be used for long distance fiber networking for manufacturing, business parks, and school campus applications. Easy plug and play installation. IEEE 802.3z Gigabit Ethernet & ANSI Fiber Channel Compliant. Also compliant with Small Form-Factor Pluggable (SFP) Multi-Source Agreement (MSA) ports. TRENDnet LIFETIME PROTECTION: This module comes with lifetime manufacturer protection. TRENDnet's 4-Pack SFP Single Mode LC Module, model TEG-MGBS10/4, includes four fiber gigabit SFP modules that are compatible with standard SFP slots found on network switches and fiber media converters. Each Single Mode SFP module is equipped with a duplex LC fiber connection interface, and supports gigabit single mode fiber connections for long distance network applications. Fiber Applications Long distance fiber networking for manufacturing, business parks, and school campus applications. Fiber Mode/Distance Multi-Mode transceiver spans distances up to 10km (6.2 mi.) at gigabit speeds. Compatibility Hot-pluggable with an MSA compliant SFP slot and compatible with fiber cables with LC type duplex connectors. Package Contents 4 x TEG-MGBS10 Quick Installation Guide NDAA / TAA compliant (U.S. and Canada only) More from the Manufacturer.FIBER APPLICATIONS: These LC modules can be used for long distance fiber networking for manufacturing, business parks, and school campus applications. Easy plug and play installation..INCLUDED: (Qty 4) TEG-MGBS10 10km (6.2 Miles) SFP Single-Mode LC Modules.IEEE 802.3z Gigabit Ethernet & ANSI Fiber Channel Compliant. Also compliant with Small Form-Factor Pluggable (SFP) Multi-Source Agreement (MSA) ports..DATA RATES & RANGE: SFP modules support data rates up to 1.25Gbps with transmission distances of up to 10km (6.2 Miles)

Compliant with IEEE 802.3ab Gigabit Ethernet Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant Supports data rates of up to 1.25Gbps Transmission distance of up to 100m (328 ft.) Hot-Pluggable RJ-45 connector Lifetime TRENDnet Manufacturer's Warranty TRENDnet's 1000BASE-T RJ-45 Copper SFP Module, model TEG-MGBRJ, converts a standard SFP slot into a RJ-45 gigabit port for additional copper connectivity. This SFP module works with standard SFP slots commonly found in network switches and fiber media converters. Save on equipment costs by repurposing a switch's unused SFP slots for copper connectivity. RJ-45 Copper SFP Take advantage of unused SFP slots and repurpose them with RJ-45 copper Ethernet connectivity. Gigabit Speeds 1000BASE-T RJ-45 copper SFP spans distances up to 100m (328 ft.) and supports up to 1.25Gbps. Compatibility Compatible with a MSA compliant SFP slot and 1000BASE-T RJ-45 connections. PACKAGE CONTENTS TEG-MGBRJ Quick Installation Guide NDAA / TAA compliant (U.S. and Canada only) More from the Manufacturer.Supports data rates of up to 1.25Gbps.Lifetime TRENDnet Manufacturer's Warranty.RJ-45 connector.Hot-Pluggable

There are many media/fiber converters on the market, FC126 and FC1126, however, are essentially different: Developed in close collaboration with HP, both fiber adapters are specially designed for HP's LaserJet Enterprise range. FC126 and FC1126 are permanently installed on the printer. All connectors are within the printer. This prevents potential eavesdropping and the safety of the fiber optic network is maintained right up to the printer. This built-in adapter maintains all of the printer's features - everything remains as it was. No external power supply. All necessary power is provided by the printer..Total Number of Ports: 2.Network (RJ-45): Yes.DVI: No