Ethernet Media Converters

The ME-ISW Series is a hardened Fast Ethernet Mini media converter that provides a cost effective, plug-and-play media conversion between 10/100Base-TX ports and 100Base-FX ports for hardened or outdoor 10/100 environments. With its supported operating temperature range of -40°C to 75°C, the Mini offers a space saving alternative for converting copper to fiber in extreme environments. NDAA Compliant, TAA Compliant.DIN Rail clip and Velcro included.Multiple mounting options:.Available with LC, ST or SC fiber interfaces and available for multimode or single mode fiber.No configuration required.Small mechanical size allows use in enclosures with space constraints

The SBFTF Series is a that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Uses multimode fiber with SC connector, ideal for short‑to‑medium distance Ethernet transmission..Stand‑alone Fast Ethernet media converter designed to bridge copper 10/100Base‑TX connections to fiber 100Base‑FX links..Supports 10 Mbps and 100 Mbps Ethernet speeds, automatically negotiating duplex modes for compatibility..Provides reliable multimode fiber connectivity up to 2,000 meters, suitable for building or campus networks..Fully compliant with Ethernet standards (10/100Base‑TX to 100Base‑FX), but does not support Gigabit speeds..Operates efficiently with typical power consumption around 3 Watts, minimizing heat and energy use..Offers high reliability with a Mean Time Between Failures of approximately 1,000,000 hours..Operates at 1310 nm wavelength optimized for multimode fiber transmission..Lifetime Limited Warranty

The SBFTF1010-130 Redundant Link Protector is a 10/100 Ethernet fault-tolerant transceiver that significantly reduces network down time by adding a new level of redundancy to 10/100 Ethernet connections. The Redundant Transceiver has three ports: one for the critical (main) device, one for the default (primary) path to the critical device, and another (backup) for the backup path. It is a smart device that will not send any signal on a path that is inactive. If the primary path loses its link, then the transceiver will switch to the backup path in approximately 189 milliseconds. When the primary path re-establishes its link, the Redundant Link Protector will automatically switch back to the primary path. Optional functionality, controlled via a dip switch, allows the unit to move from the fault-tolerant mode to a 3-port switch mode..Singlemode fiber with SC connector for long‑distance Ethernet transmission..Media converter providing redundant Ethernet link protection with automatic failover..Supports 10 Mbps and 100 Mbps Fast Ethernet speeds..20,000 meters (20 km) over singlemode fiber..Fully supports Ethernet (10/100BASE‑TX), but does not support Gigabit speeds..Operates with low power consumption of approximately 3 Watts..Offers high reliability with a Mean Time Between Failures of about 1,000,000 hours..Operates at 1310 nm wavelength optimized for singlemode fiber transmission..Lifetime Limited Warranty

PoE+ Industrial Fiber to Ethernet Media Converter 60W - SFP to RJ45 - Singlemode/Multimode Fiber to Copper Gigabit Ethernet - Compact Size - IP-30/ -40 to +75C (IMC1GSFP60W).EXTEND, CONVERT, POWER: Fiber to Ethernet media converter with PoE extends & converts fiber to RJ-45 copper; Provides up to 60W of PSE power to PoE/PoE+/PoE++ PD devices like cameras and sensors.FLEXIBLE POWER: Can be hardwired using terminal block (48-56VDC) power or powered using a standard Type-N barrel wall adapter (not included).OPEN SFP SLOT: Any MSA compliant SFP can be used for the incoming multimode or singlemode fiber connection; easy deployment across applications or fiber cable types.ROBUST DESIGN: Industrial Gigabit Media Converter w/MTBF 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing | Hardened operating temp -40C to 75C.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This media converter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.Industrial PoE Media Converter | 10/100/1000 Mbps | 60 Watts | Open SFP | DIN Rail Mountable

Features The Axiom Mini 10/100/1000Base-TX to 100/1000Base-FX Media Converter Series is a Gigabit Ethernet stand-alone Mini unmanaged media converter that provides cost effective, entry-level media conversion between Copper RJ45 10/100/1000Base-TX ports and 100/1000Base-FX fiber optic ports. Available with an open SFP port or its fixed connector configuration, deployments can be just plug-and-play or are fully customizable with the transceiver of your choice. With its small size, it is ideal for locations where space is limited. Choose from Multimode or Single-mode fiber connections to meet the distance requirements of your network. Unit and Port LEDs allow for quick status information Auto-Negotiation Full-Duplex or Half-Duplex Operation Modes Auto-MDI/MDIX Automatic Link Restoration Connect to legacy network equipment Eliminate Collision Domains 10/100/1000Base-TX UTP to 1000Base-FX Fiber media conversion Supports IEEE802.3U IEEE802.3z 1000Base-TX/FX protocols , IEEE802.3ab standards Available with Open SFP Port or optional built in LC/SC/ST Connections DIP switch to set different configurations Compact package size Supports IEEE802.3x flow control; 100Base-FX interface; auto MDI-MDIX function; LFP function.Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.With 1000Base-SX technology get up to 1000Mbps data transfer rate over optical fiber cable.Ensures reliable performance for everyday use

Copper port auto negotiates for network speed and features Auto MDI-X for easy cabling. LEDs indicate when it is feeding PoE power as well as when power is interrupted. RoHS compliant. Connect Gigabit-speed fiber optic to a 10-/100-/1000-Mbps copper UTP segment while also powering 802.3af devices at the end of the CAT5 run. This PoE PSE Gigabit Media Converter from Black Box enables you to transparently connect copper cabling to multimode fiber as an economical way to extend Ethernet communications well beyond the 100-meter (327-foot) CATx limit. Along with matching copper to interference-free fiber at Gigabit speeds, the converter doubles as power sourcing equipment (PSE) for Power over Ethernet (PoE) devices plugged in on the copper side. Using existing UTP cabling for both data communications and 48-VDC power simplifies a network application in terms of provisioning power and maintaining equipment. It's particularly ideal for locating equipment where electrical access is inconvenient or just too expensive to locate. Install PoE-compatible security cameras and wireless access points in areas without any nearby power outlets while reducing your overall power consumption, too. Plus, the PoE PSE Gigabit Media Converter has extensive power management features, including overcurrent protection, undercurrent detection, minimum load sensing, and PSE MDI power enable/disable. For reliable data communications, the media converter boasts link fault pass-through (LFP) capabilities, monitoring receive ports on both the fiber and copper sides for loss of signal. If signaling is lost on one media port, it automatically disables the transmit (TX) signal to the other media port. Additionally, a far-end fault (FEF) function enables the converter to cease sending a link pulse to a link partner if signaling on the fiber receive (RX) port is lost. The link partner will also synchronously stop sending data. This way, you don't lose valuable data transmitted over an invalid link. This product is covered by one or more of the following: United States Patent Nos. 7,457,250; 8,902,760; and/or 9,019,838..Compliant to EN62368.A low-cost, economical solution for powering PoE devices CATx.Powered device (PD) signature sending detects when a PoE device is connected..Protects against damage caused by overcurrent events and offers undercurrent detection..Link fault passthrough monitors both copper and fiber receive ports for loss of signal.

The IMC-370 series offers the most compact media converters. They can extend the 10, 100 and 1000Mbps twisted-pair network segments up to 80km over fiber technology. Supporting both 10/100/1000Mbps auto negotiation on the copper port and 1000Mbps full-duplex on the fiber port, the IMC-370 series serves as a media and data rate converter. The IMC-370I-SFP supports Link Fault Pass Through (LFPT) functionality which can be enabled/disabled by a DIP switch on the unit. This useful diagnostic feature assists the network administrator in indicating a fault condition on a given segment between the interfaces. The IMC-370I supports plug-n-play functionality, auto negotiation, and AutoCross operation. It can be powered by AC/DC power, dual USB cable, or via installation in a centrally-powered media converter chassis..Industrial grade design that supports an extended operating temperature range (IMC-370I series).Provides status LED.Supports multiple power options: AC or DC adapter and dual USB cable.Supports Link Fault Pass Through (LFPT) (IMC-370I-SFP).Centralized powered IMC-318I chassis

This is a mini media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-SX via a 850nm multi-mode fiber (MMF) SC connector, which allows distance reach up to 550m. This provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 1000Base-SX fiber, while extending the network reach beyond the 100m reach limitation of copper and saving space (3.75" x 2.25" x 1"). Our media converters are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs..Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.With 10/100/1000Base-TX technology get up to 1000Mbps data transfer rate over twisted pair cable.Ensures reliable performance for everyday use

This is a mini media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-SX(ST) via a 850nm multi-mode fiber (MMF) ST connector, which allows distance reach up to 550m. This provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 1000Base-SX fiber, while extending the network reach beyond the 100m reach limitation of copper. Our media converters are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs..Expand your network capabilities with this 2 transceiver/media converter.With 10/100/1000Base-TX technology get up to 1000Mbps data transfer rate over twisted pair cable.Ensures reliable performance for everyday use

This is a mini media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-LX(ST) via a 1310nm single-mode fiber (SMF) ST connector, which allows distance reach up to 20km. This provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 100Base-LX fiber, while extending the network reach beyond the 100m reach limitation of copper and saving space (3.75" x 2.25" x 1"). Our media converters are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs..Expand your network capacity and fulfill requirement with this 2 transceiver/media converter.With 10/100/1000Base-TX network technology, get fast transfer rate and reliable data connection.Ensures reliable performance for everyday use

The StarTech.com® ET91000SM20 GbE copper-to-fiber transceiver/media converter helps to convert and extend your GbE connection up to 20 km using single mode LC fiber connector. This media converter supports full and half-duplex operation with a maximum data transfer rate of 2 Gbps (full-duplex), as well as it supports auto negotiation or forced mode. This media converter is compatible with 1000Base-T, 1000Mbps Gigabit copper and 1000Base-LX fiber protocols..Transceiver/media converter converts and extends your GbE connection up to 20 km using single mode LC fiber connector.Dimensions: 0.9"H x 3.5"W x 6.4"D.Comes in steel color with plastic construction.Interfaces/port: 1 x fiber optic LC duplex female, 1 x RJ-45 female.Ethernet technology: Gigabit Ethernet.Media type supported: Single-mode optical fiber.Wavelength: 1310 nm.Maximum data transfer rate: 2 Gbps.Operating range: 20 km.Form factor: Rack-mountable, standalone.Power: 100 - 240 VAC input voltage, 12 VDC output voltage, 19.2 W power consumption, 0.48 A/1.6 A input/output current.Jumbo frame support: 9.6K max, MTBF: 65000 hours.LED indicators: 1 x PWR, 1 x RPF, 1 x LFP, 1 x LNK, 1 x LINK x RJ45, 1 x FULL RJ45.High-performance media converter supports a range of network setup and diagnostic protocols (for example, ALS and Auto MDIX).Heavy-duty fiber media converter is designed for maximum reliability.Includes universal power adapter (NA/EU/UK/AU), instruction manual.Meets RoHS, WEEE standards.Weight: 14.5 oz..Comes with 2 year warranty

Cisco 100BASE-FX small form-factor pluggable (SFP) fast Ethernet interface converter is a hot-swappable device that plugs into a gigabit Ethernet SFP port on Cisco catalyst 3750 series, 3560 series, and 2970 series switches..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.4"(H) x 2.2"(W) x 1/2"(D).Compatibility: Cisco catalyst 3750, 3560, and 2970 series switches.Connectivity media: 62.5/125 um multi mode fiber, 50/125 um multi mode fiber.Transmit (dBm): 50/125-micron: -23.5 min, -14max, 62.5/125-micron: -20 min, -14max, receive (dBm): 50/125-micron: -33.35 min, -11.8 max, 62.5/125-micron: -33.35 min, -11.8 max.Distance supported: 6.5'.Operating temperature: 32 - 158 deg F, storage temperature: -40 - 185 deg F.Surge current: 350 typical, wavelength (nm): 1270 min, 1300 typical, 1380 max.Power consumption: 1.5 W per port.Input voltage: 3.3 V - 3.5 V device, 3.3 V typical device.Input current: 405 mA typical, 450 mA maximum.Data transfer rate: 100 Mbps fast Ethernet full duplex.MTBF: 12,820,512 hours.Form factor: Hot-swappable.System requirements: Cisco IOS software release 12.2(20)SE1.Application/usage: Data networking.Regulatory and standards compliance: IEC 60825-1.SFP fast ethernet interface converter 100FX SFP on GE SFP ports for DSBU switches.

Features The Axiom POE+ (PSE) Series are a 10/100/1000Base-TX to 1000Base-FX (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Compliant with IEEE802.3at standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, providing power to or IEEE802.3at powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feet). Features: 10/100/1000Base-TX UTP to 1000Base-FX fiber media conversion IEEE802.3at PoE+ PSE compatible Built-in AC/DC power supply Over-current protection DIP switch to set different configurations LFP (Link Fault Pass-through) support.Connect different types of media within a network with this single port.With 10/100/1000Base-TX technology get up to 1000Mbps data transfer rate over twisted pair cable.Ensures reliable performance for everyday use

Omnitron miConverter miniature UTP to 100 fiber media converter provides cost-effective fiber connectivity from Ethernet switches to diagnostic equipment, desktop and laptop. Converter features 10/100Base-TX and 100Base-FX network technology..Interface/ports: 1 x RJ45, 1 ST port.Dimensions: 0.8"(H) x 1.7"(W) x 4.1"(D).Compatibility: PC.Connectivity technology: Wired.ST port type: Duplex.Form factor: External.Connectivity media: Twisted-pair, optical fiber.Max transfer distance: 3.11 mile.Ethernet technology: Fast Ethernet.Network technology: 10/100Base-TX, 100Base-FX.Wall-mount with optional mounting brackets, small and light, weighs only 5 ounces (without power supply).Input voltage: 15 VDC.Supports full/half-duplex UTP auto-negotiation.Multimode, single-mode and single-fiber options, ST or SC fiber connector options, optional USB power adapter cable available for operation without AC power adapter.Includes miConverter 10/100, US power supply 120volt / 60Hz, user manual.Certifications and standards: RoHS, WEEE, EIA/TIA 568A/B, UL, CE, FCC-Class B, IEEE 802.3, IEEE 802.3u.Warranty: Lifetime limited.Omnitron miConverter miniature UTP to 100 fiber media converter automatically adjusts crossover function and supports full/half-duplex UTP auto-negotiation.

TRENDnet's Industrial SFP to Gigabit PoE++ Media Converter (95W), model TI-UF11SFP, converts a long-distance fiber connection to a copper connection while providing power to PoE, PoE+, and PoE++ compliant devices, such as IP cameras, VoIP phones, and wireless access points. This PoE++ media converter is IP50 rated with hardened components for extreme industrial environments and an operating temperature range of -40°- 75° C (-40° - 167° F). The front panel DIP switches control Link Fault Pass Through (LFPT), and setting the device to switch/converter mode. The industrial PoE++ media converter's rugged design also provides protection from shock, freefall, and vibration. DEVICE INTERFACE: 1 x Gigabit PoE++ port (100/1000Mbps); 1 x Gigabit SFP port (100/1000Mbps); 6-pin removable terminal block; LED Indicators; DIP Switch NDAA + TAA COMPLIANT: With NDAA and TAA compliant products, you can plan and install the networking solutions that government customers demand today. (U.S. and Canada only) RELIABLE TECH SUPPORT: Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers. PoE++ OUTPUT: Converts long-distance fiber to copper while providing up to 95W of power to PoE, PoE+ and PoE++ compliant devices, such as IP cameras and wireless APs. DIP SWITCHES: (1) LFPT (Link Fault Pass Through) on/off (default ON); (2) Converter and Switch mode on/off (default Converter mode) POWER SUPPLY SOLD SEPARATELY: Powers supply sold separately (model: TI-S15052) NDUSTRIAL DESIGN: Designed with a rugged IP50 rated housing, resistance to a high degree of vibration and shock, protection against ESD/EMI/surge, and operates within an extreme operating temperature range of -40° - 75° C (-40° - 167° F). FIBER NETWORKING DISTANCES: Up to 80km fiber networking distances with the TEG-MGBS80 SFP module LINK FAULT PASS THROUGH: Easily enable the LFPT (Link Fault Pass Through) feature on the industrial multi-mode media converter using the front panel DIP switch to identify a link fault to the remote LFPT enabled media converter SURGE PROTECTION: 6kV Ethernet surge protection DIN RAIL & WALL MOUNTS INCLUDED: IP50 rated metal enclosure with included DIN-rail and wall mount hardware GROUNDING POINT: Grounding point protects equipment from external electrical surges ELECTRO MAGNETIC COMPLIANCE: Complies with industrial EMS certifications ESD (IEC 61000-4-2); Contact: 6kV, Air: 8kV; EFT (IEC 61000-4-4): Power 2kV, Signal: 2kV; Surge (IEC 61000-4-5): Power: 2kV, Signal: 2kV.Includes DIN-Rail and wall mounts.Powers supply sold separately (model: TI-S15052).Overload current protection.6kV RJ45 surge protection.Operating temperature range of -40° - 75° C (-40° - 167° F)

This is a media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-SX(SC) via a 850nm multi-mode fiber (MMF) SC connector, which allows distance reach up to 550m. This provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 1000Base-SX fiber, while extending the network reach beyond the 100m reach limitation of copper. Our media converters are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs..Expand your network capabilities with this 2 transceiver/media converter.With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over twisted pair cable.Ensures reliable performance for everyday use

The Transition Networks® M/GE-PSW-SFP-01-NA mini GbE media converter provides cost-effective and entry level media conversion of 10/100/1000Base-T stand alone copper connection to 1000Base-X fiber connections. This hot swappable media converter has dual speed SFP port that supports autosensing 100 m or 1000 m SFP transceivers. The LEDs of the converter provide quick status information. This converter features auto-negotiation, auto-MDI/MDIX, automatic link restoration and fixed full duplex on fiber..Media converter provides cost-effective and entry level media conversion.Dimensions: 0.85"H x 1.8"W x 3.3"D.Comes in black color.Interfaces/ports: 1 x 10/100/1000Base-T RJ-45 to 100/1000Base-X SFP slot.Ethernet technology: Gigabit Ethernet.Power supply: Input: 4.5 VDC - 14 VDC, external AC/DC required, 12 VDC, 0.5 A, consumption: 2.4 W.Status LEDs: PWR (power) below RJ-45: On = Power, FX-link/act upper Left on RJ-45: On = link, TX-link/act upper right on RJ-45: On = link.Auto-negotiation, fixed full-duplex on fiber, auto-MDI/MDIX.Automatic link restoration, jumbo frame up to 10240 bytes.Temperature: 0 - 50 deg C operating, -15 - 65 deg C storage, humidity: 5 - 95% (non-condensing).Meets safety: Wall mount power supply, UL, cUL (Canada), FCC class A, CISPR22/EN55022 class A, EN55024, CE Mark standards.Weight: 2 lbs..Comes with lifetime warranty.Mini gigabit Ethernet media converter provides a cost-effective method for integrating fiber optic cabling into a 10/100/1000 UTP environment.

Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs. Black Box® Multipower Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port with a CAT5 cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC. The converters not only link 10- and 100-Mbps segments to fiber cabling, they also work as data rate converters, performing 10/100 auto negotiation on the twisted-pair port. Choose from multimode duplex, single-mode duplex, and single-mode single-strand duplex fiber versions. For extra versatility, you can power the Multipower Miniature Media Converter one of three ways: through the external AC power supply included with each converter, through the optional USB Power Adapter Cable (LHC021A), which plugs into a PC's USB port and is sold separately, or through the optional rackmount PowerTray (LHC018A-AC-R2). Media Converter Fast Ethernet Single Mode 1310nm 40km ST. 10/100Mbps copper to 100Mbps fiber. Typical Enterprise applications include LAN extension, fiber mode conversion, or Ethernet speed conversion. These media converters feature a small metal enclosure that can be used stand alone or inserted into a high density rack mount chassis, LHC018A-AC-R2. Converters include an external 100-240VAC power adapter with US and Europe plug clips. Converters may also be powered from a USB port using the LHC021A USB power cable. The LHC018A-AC-R2 chassis is 1.5U high, has slots for up to 18 media converters, and includes a 100-240VAC power supply. The media converters are unmanaged, plug and play with no configuration..Brings fiber to the desktop more conveniently and at a lower cost than installing fiber NICs..Connects Ethernet or Fast Ethernet to fiber optic cable..Compact size-measures just 0.8"H x 1.8"W x 3.4"D..Auto negotiates for speed and duplex..A DIP switch enables Link Fault Pass-Through to be turned on and off for better troubleshooting.

Tripp Lite N785-001 LC Multimode media converter contains 6 performance monitoring LEDs and operates at 850 nm wavelength. Converter has a small, compact design and facilitates auto negotiation of MDI/MDI-X..Dimensions: 1"H x 4.7"W x 2.75"D.Form factor: Desktop.Connector: RJ45 female on first end and SC female on second end.Black.Network technology: 10/100/1000Base-T, 1000Base-SX.Maximum distance supported: Up to 550 meters or 1800', Media type supported: Optical Fiber, Twisted Pair.Fiber optic wavelength: 850 nm.Data transfer rate: 1 Gbps.Adapter input: 100 - 240 VAC, 50/60Hz, Output: 5 V, 1.2 A.System requirements: 10/100/1000 Ethernet network, multimode LC Fiber cable.Auto-detects full/half duplex transfer mode.Auto negotiation MDI/MDI-X.Features 6 performance monitoring LEDs.Small, compact design.Weight: 1 lbs..Warranty: 1 year limited.Tripp Lite N785-001 LC Multimode media converter automatically detects half or full duplex transfer mode and has a 550 m range.

Install the StarTech.com fiber media converter on your network to connect isolated locations within the same building or in other buildings to your network safely and securely. The advanced security features of the media converter provide a secure connection that meets government standards, making it an excellent choice when EMI is not acceptable..Interfaces/ports: 1 x RJ-45, 1 x LC.Dimensions: 0.8"(H) x 3.7"(W) x 6.3"(L).Compatibility: ETCHS2U rack mount chassis.Supports stand alone operation, or installation into the ETCHS2U rack mount chassis.SFP can be removed from the unit, for replacement or swapping to a different specification.Advanced features include link-loss forwarding, remote monitor status, two frame lengths.Operating temperature: 0 - 60 deg C, storage temperature: -10 - 70 deg C.Humidity: 10 - 90%.Supports full or half-duplex operation.Provides connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether.Perfect for secure connections required by government agencies where EMI is not acceptable.Connect traffic control/monitoring systems at extreme distances to the main office.Performance class: Gigabit Ethernet.Form factor: Rack-mountable, desktop.Link loss forwarding, remote status monitoring ensures maximum up-time.Provides Ethernet to fiber conversion as a standalone device, or can be installed into the ETCHS2U 20 slot chassis for added versatility.Rugged steel casing for durability in harsh environments.StarTech.com Fiber Media Converter - Standalone or Rack-Mount Installation

The Omnitron miConverter™ 1239-0-1 miniature transceiver/fiber media converter supports 1000Base-X, 1000Base-BX-D, 1000Base-T, 1000Base-ZX, 1000Base-BX10-U, 1000Base-BX and 1000Base-LX/SX networks. This SFP-type converter enables easy adaptability to different fiber types and supports CWDM technology to increase the bandwidth of fiber infrastructure with speed and distance. It facilitates a plug-and-play option with multi-mode and single-mode optical fiber..Transceiver/media converter supports 10BASE-T, 100BASE-TX, 1000BASE-T, 1000BASE-X and the IEEE 802.3 network specifications.Dimensions: 0.84"H x 1.71"W x 4.1"D.Interfaces/port: 1 x Network (RJ-45), 1 x SFP.Ethernet technology: Ethernet, Fast Ethernet, Gigabit Ethernet.Media type supported: Twisted pair, optical fiber, Network technology: 1000Base-X, 1000Base-BX-D, 1000Base-T, 1000Base-ZX, 1000Base-BX10-U.Form factor: Rack-mountable, desktop, external, wall mountable.Power: 100-240 VAC/60 Hz, 5-12 VDC via 2.5 mm barrel input voltage.Jumbo frame support: Up to 10240 bytes, MTBF: 250000 hours.Supports MDI/MDIX auto-crossover, cost-effective mounting and proven solution.Includes US power supply - 120-240 V/50-60 Hz, velcro strip, user manual.Meets RoHS, WEEE, UL, CE, FCC Class A standards.Comes with lifetime warranty

Auto negotiates for speed and duplex. A DIP switch enables Link Fault Pass-Through to be turned on and off for better troubleshooting. Powered by a universal AC power supply, a PC's USB port, or the optional rack mountable PowerTray. Auto MDI/MDI-X means you never need to worry about what kind of cable to use. Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs. Black Box Multipower Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port with a CAT5 cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC. The converters not only link 10- and 100-Mbps segments to fiber cabling, they also work as data rate converters, performing 10/100 auto negotiation on the twisted-pair port. Choose from multimode duplex, single-mode duplex, and single-mode single-strand duplex fiber versions. For extra versatility, you can power the Multipower Miniature Media Converter one of three ways: through the external AC power supply included with each converter, through the optional USB Power Adapter Cable (LHC021A), which plugs into a PC's USB port and is sold separately, or through the optional rackmount PowerTray (LHC018A-AC-R2)..Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs.Compact size; measures just 0.8"H x 1.8"W x 3.4"D.Powered by a universal AC power supply or the optional rack mountable PowerTray.Auto MDI/MDI-X means you never need to worry about what kind of cable to use.Converters may also be powered from a USB port using the LHC021A USB power cable

Further Details This tough media converter is the ideal way extend your network over fiber and also power a PoE device. Use it to link to faraway PoE devices such as IP security cameras, wireless access points, and VoIP phones. The media converter features two autosensing 10/100/1000 UTP ports plus one single-mode fiber port that can extend a network connection up to 15 kilometers (9.3 mi.). Both UTP ports supports 802.3at Power over Ethernet, enabling it to power a PoE+ PD device; the other is a straightforward Ethernet port, which can be used for network expansion. The Gigabit PoE+ Media Converter can be powered three ways: from an AC power supply (LGC5210-PS, order separately), via the DC power jack, or via the DC terminal block. When used with DC power to the terminal block, the converter supports an extended operating temperature range of +32 to +158° F (0 to +70° C). The converter requires only one power source to power both the converter and a PoE+ device; you can position the PoE+ device up to 100 meters (328 feet) away from the converter, enabling flexible placement of wireless APs and security cameras. A pair of input terminals and output terminals enables you to cascade DC power in a DIN rail installation (optional DIN Rail Clip (LXC-DR) is sold separately)..Acts as power sourcing equipment (PSE) on the copper side to power PoE devices..Both UTP ports are autosensing with Auto MDI/MDI-X; one UTP port supports 802.3at PoE+..Features two 10-/100-/1000-Mbps copper ports and one 1000Mbps fiber port.

Features The Axiom 100Mbps POE (PSE) Series are a 10/100Base-TX to 100Base-FX media converter, which allows two types of network segment to be connected easily. Compliant with IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3af powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feet). Features: 10/100Base-TX UTP to 100Base-FX fiber media conversion IEEE802.3af PoE PSE compatible Built-in AC/DC power supply Over-current protection DIP switch to set different configurations LFP (Link Fault Pass-through) support.Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.With 100Base-LX technology get up to 100Mbps data transfer rate over optical fiber cable.Ensures reliable performance for everyday use

Bring fiber to the desktop more conveniently and at a lower cost than installing fiber NICs. Black Box® Multipower Miniature Media Converters make it easy to bring fiber to the desktop. Just connect a Miniature Media Converter to your PC's copper port with a CAT5 cable, then connect a fiber cable to the converter's other side. That's all there is to it! Best of all, you can tuck these tiny converters unobtrusively behind your PC. The converters not only link 10- and 100-Mbps segments to fiber cabling, they also work as data rate converters, performing 10/100 auto negotiation on the twisted-pair port. Choose from multimode duplex, single-mode duplex, and single-mode single-strand duplex fiber versions. For extra versatility, you can power the Multipower Miniature Media Converter one of three ways: through the external AC power supply included with each converter, through the optional USB Power Adapter Cable (LHC021A), which plugs into a PC's USB port and is sold separately, or through the optional rackmount PowerTray (LHC018A-AC-R2). Media Converter Fast Ethernet Multimode 1300nm 2km SC. 10/100Mbps copper to 100Mbps fiber. Typical Enterprise applications include LAN extension, fiber mode conversion, or Ethernet speed conversion. These media converters feature a small metal enclosure that can be used stand alone or inserted into a high density rack mount chassis, LHC018A-AC-R2. Converters include an external 100-240VAC power adapter with US and Europe plug clips. Converters may also be powered from a USB port using the LHC021A USB power cable. The LHC018A-AC-R2 chassis is 1.5U high, has slots for up to 18 media converters, and includes a 100-240VAC power supply. The media converters are unmanaged, plug and play with no configuration..Connects Ethernet or Fast Ethernet to fiber optic cable..Compact size-measures just 0.8"H x 1.8"W x 3.4"D..Converters may also be powered from a USB port using the LHC021A USB power cable..Auto negotiates for speed and duplex..A DIP switch enables Link Fault Pass-Through to be turned on and off for better troubleshooting.

Features The Axiom POE+ (PSE) Series are a 10/100/1000Base-TX to 1000Base-FX (also can be forced to 100Base-FX) media converter, which allows two types of network segment to be connected easily. Compliant with IEEE802.3at standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, providing power to or IEEE802.3at powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feet). Features: 10/100/1000Base-TX UTP to 1000Base-FX fiber media conversion IEEE802.3at PoE+ PSE compatible Built-in AC/DC power supply Over-current protection DIP switch to set different configurations LFP (Link Fault Pass-through) support.Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.With 1000Base-SX technology get up to 1000Mbps data transfer rate over optical fiber cable.Ensures reliable performance for everyday use

10/100/1000BASE-T to 1000BASE-X 802.3af/at Easily convert 10/100/1000BASE-T to 1000BASE-X 802.3af/at Ethernet with this PoE converter. Know link media issues immediately Features helpful Link Fault Pass-Through (LFP) functionality. LFP immediately alarms administrators to the problem with the link media and provides an efficient solution to monitor the net. Know where connections are down Link Loss Carry Forward (LLCF) informs you of failing links. LLCF means when a device connected to the converter and the TP line lose the link, the converter's fiber will disconnect the link of transmit..Converts 10/100/1000BASE-T to 1000BASE-X 802.3af/at Ethernet.One RJ45 twisted-pair jack, one fiber-optic connector and four LED indicators.Link fault pass-through functionality.PoE function.Link Loss Carry Forward and Link Loss Return functionality

Extend your network Meet your massive networking needs. This media converter lets you extend your copper-based network via fiber to a maximum distance of 80 km through the use of an SFP. Also, it's quick and easy to install. Support multiple standards It meets the standard you need it to. It's fully compliant with IEEE802.3, IEEE802.3U, 10/100/1000BASE-TX, and 1000BASE-FX standards. Status updates Know how your media converter is performing. Operation status can be locally monitored through a set of diagnostic LEDs located on the front panel..Extend a copper-based network via fiber for a maximum distance of 80 km.Quick and easy installation.Diagnostic LEDs on the front panel.One RJ45 connector.One SFP slot

SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media converter that enables enterprises to provide power to network devices over the existing CAT5 data connection. Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with -48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities. In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset.) The PoE converter is fully compatible with devices that comply with the IEEE 802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI..Expand your network capabilities with this 2 transceiver/media converter.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With 10 /100 Base-TX technology get up to 100 Mbps data transfer rate over optical fiber cable.With Wall mounting feature, you can conveniently install the device while keeping the wires and cables organized

This Ethernet fiber media converter offers an easy, cost-effective way to extend your network over fiber, using the SFP+ of your choice. It converts a copper RJ45 Ethernet connection to 10 Gigabit fiber, to extend your network over longer distances or connect workstations to switches. Cost-Effective Extensions and Flexible Performance : The RJ45 to fiber media converter provides a cost-efficient way to connect an Ethernet network to remote devices over a fiber backbone. It features an open SFP+ slot that supports the MSA-compliant 10 Gigabit SFP+ that best suits your fiber connection setup (single mode/multimode) and distance requirements. A Versatile Way to Connect Different Networks: The 10Gb fiber media converter supports auto-negotiation while providing versatile connectivity to existing networks and devices, maximizing the usage and performance of legacy equipment. Network Compatibility: 10GBASE-ER. 10GBASE-LR. 10GBASE-LW. 10GBASE-EW. 10GBASE-R. 10GBASE-SR. 10GBASE-SW. 10GBASE-T. Fast and Easy Installation: The unmanaged fiber media converter has a standalone compact design with simple plug-and-play setup to ensure fast and easy installation. StarTech.com Fiber Media Converters: Overcome the distance limitations of traditional network cables with StarTech.com fiber media converters. Our converters connect different types of network cabling and help you extend networks between buildings and over longer distances. Whether you need to extend a network connection 550 m or 40 km, we can help you. The MCM10GSFP Ethernet Fiber Media Converter is backed by a StarTech.com 2-year warranty and free North American based multilingual lifetime technical support..Convert between an RJ45 copper Ethernet connection and a fiber-optic connection to extend your network cost-effectively.Customize the network extension distance to your requirements with virtually any MSA-compliant multimode or single-mode transceiver using the open 10Gb SFP+ slot.10Gbps (10GBASE-T) compatible RJ45 port supports auto-negotiation.Install easily with compact and durable standalone design

The StarTech MCM10G6SSFP is a compact, high‑performance 10GbE multi‑gigabit media converter designed to seamlessly bridge copper and fiber networks for modern enterprise environments. Featuring a 10GBASE‑T RJ‑45 port and an open SFP+ slot, it enables flexible copper‑to‑fiber conversion across mixed‑speed networks, supporting 100M, 1G, 2.5G, 5G, and 10G Ethernet for maximum compatibility. Engineered for reliability, it complies with IEEE 802.3 standards, supports 16K jumbo frames, auto‑negotiation, and auto MDI/MDI‑X to ensure stable, optimized data transmission across diverse infrastructure setups. The unit’s durable metal chassis allows versatile deployment as a standalone device or via wall‑mount, rack‑mount, DIN rail, or chassis installations, making it suitable for data centers, wiring closets, and remote network expansions. With low power consumption (3.75W typical) and operating temperatures ranging from 0°C to 50°C, it delivers dependable performance in space‑sensitive and power‑restricted environments. Its plug‑and‑play design, compatibility with both single‑mode and multimode SFP+ modules, and TAA compliance further reinforce its suitability for professional, on‑premises networks requiring scalable, high‑speed copper‑to‑fiber conversion..Built for high‑speed data transmission and designed as a standalone converter enabling direct RJ‑45 to SFP+ fiber conversion..Featuring an RJ‑45 copper port that accepts 100M, 1G, 2.5G, 5G, and 10G Ethernet input..Offering an open SFP+ slot that supports both single‑mode and multimode 10G fiber transceivers..Equipped with female terminations on both the RJ‑45 port and the SFP+ cage..Supporting advanced data features including IEEE 802.3 compliance, auto‑negotiation, auto MDI/MDI‑X, full‑duplex flow control, and 16K jumbo frames..Complying with TAA and ROHS3 requirements while adhering to IEEE Ethernet standards.

TRENDnet's Industrial 100/1000Base-T to SFP Media Converter, model TI-F11SFP, is a reliable IP50 rated media converter with hardened components rated for extreme industrial environments. The front panel DIP switches control Link Fault Pass Through (LFPT), and setting the device to switch/converter mode. DEVICE INTERFACE: 1 x Gigabit Port; 1 x Gigabit SFP Port (100/1000Mbps); 3-Pin Removable Terminal Block; LED Indicators; DIP Switch NDAA + TAA COMPLIANT: With NDAA and TAA compliant network products, you can plan and install the networking solutions that government customers demand today. (U.S. and Canada only) RELIABLE TECH SUPPORT: Our team of advisors, support and tech experts are English speaking, and available for all your needs during normal business hours. We take pride in being there for our customers. INDUSTRIAL HARDENED DESIGN: Equipped with a rugged IP50 rated housing, designed to withstand a high degree of vibration and shock, and operate within an extreme temperature range of -40° - 75° C (-40° - 167° F). POWER SUPPLY SOLD SEPARATELY: 12 - 60V DC power input with overload current protection. Use this industrial sfp media converter with the compatible power supply. Model TI-M6024 (Sold Separately) SWITCH MODE TO CONVERTER MODE: This device can be set to be used in switch mode or converter mode. DIP SWITCHES: 1: Turns LFPT (Link Fault Pass Through) on/off 2: Converter mode / switch mode SURGE PROTECTION: 6kV Ethernet surge protection NETWORKING DISTANCES: Up to 80km fiber networking distances with the TEG-MGBS80 SFP module.Powers supply sold separately (model: TI-M6024).Includes DIN-Rail and wall mounts.12 - 60V DC power input with overload current protection.6kV RJ45 surge protection.Operating temperature range of -40° - 75° C (-40° - 167° F)

This is a media converter that converts a 10/100/1000Base-TX(RJ-45) to 1000Base-X via an open SFP port connector. The open SFP port allows users to customize between the SX, LX, or BX connections. This media converter provides a cost effective conversion from 10/100/1000Base-TX(RJ-45) to 1000Base-X, while extending the network reach beyond the 100m reach limitation of copper. This AC/DC powered PoE+ media converter is a Power Sourcing Equipment (PSE), which combines data transferred over a fiber optic link with 48V (or other voltage) power supply, 30 watts max, providing power to IEEE802.3at powered device (PD) over CAT5 and up UTP cable (cable length up to 100 meters / 330 feet). It complies with the IEEE802.3at standard. The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection and LFP function. The LFP (Link Fault Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault. Our media converters and network interface cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs..Attach multiple devices together or expand the number of devices connected to your existing network by using 2 transceiver/media converter.With 10/100/1000Base-TX technology get up to 1000Mbps data transfer rate over twisted pair cable.Ensures reliable performance for everyday use

The Micro Mini Media Converter is ideal for bringing fiber to the desktop and for mobile applications where light weight, compact size, and low power requirements are critical. Weighing only 2.5 ounces and about the length of a house key, this ultra-compact media converter is portable yet powerful. For extra versatility, it can be USB-powered, making it easy to provide fiber connectivity to locations where AC or DC power is unavailable, for instance, field-deployed fiber-to-the-laptop. For easy portability, this tiny converter conveniently slips into a pocket or laptop carrying case. The converter is plug-and-play with an RJ-45 port that auto negotiates for speed, duplex mode, and crossover functions for PCs with 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet. On the fiber side, the converter has an ST connector for connection to multimode fiber. Because it can be powered through a computer's USB 1.0 or 2.0 port, the Micro Mini Media Converter is ideal for connections to fiber in areas where a spare power outlet may not be available. When plugged into a computer's USB port, the media converter shuts down automatically when you turn off the computer, which saves energy..UTP port supports 10/100/1000BASE-T..Supports Jumbo Ethernet frames up to 10,240 bytes..USB-powered for portability, or use it with the included power adapter..Ultra compact, weighing only 2.5 ounces.

The Allied Telesis MMC Series of mini media converters leverages its smaller size to not only help the environment with a small carbon footprint, but also to save space in its working environment. Despite its compact size, the MMC Series delivers all the power and functionality of standard size media converters. The MMC Series are available in 100Mbps or 1000Mbps models. Depending on the model chosen, the fiber-optic port has options for fixed SC, ST, LC or SFP connectors capable of multi-mode or single-mode fiber connectivity. The twisted-pair copper port has an RJ-45 connector supporting either 100Mbps or 1000Mbps, with a maximum operating distance of 328'..Smaller size and external power supply of this 10/100/1000T to 1000SX/LC multimode mini media converter allows it to be used almost anywhere.Dimensions: 0.86"H x 2.16"W x 4"D.Rate changing auto negotiation 10/100/1000Mbps on copper port.Supports the transmission of jumbo packets up to 10KB.Transparent to 802.1Q VLAN packets.No need to manually restart/reset after power cuts.Provides low power consumption of just 1.7W.Features Smart MissingLink to aid fault diagnosis.Can be used as a stand-alone converter, wall-mounted, or slotted into an 18-slot chassis.Meets or exceeds the EN, UL, FCC, CISPR 22, C-TICK, VCCI standards

Transparently connect fiber to copper to power PoE+ devices at the edge of your network. Use the Converter to connect PoE+ devices such as PTZ (pan, tilt, zoom) cameras, 802.11n access points, VoIP phones, and more that require up to 30 watts of power. The Converter acts as a Power Sourcing Equipment (PSE) to push data and power over copper cable to the remote, Powered Devices (PDs). The Media Converter features one autosensing 10/100/1000-BASE-T UTP port plus an SFP port that can be used for multimode and single-mode 1000BASE-X fiber connections. It is powered via an external AC adapter, which delivers 47~57 input power voltage. The Converter features advanced functions such as auto-negotiation, Auto-MDIX, Link Lost Forwarding, and Link Fault Pass-Through for easy system management and troubleshooting. LEDs indicate Converter activity. This product is covered by one of more of the following: United States Patent Nos. 7,457,250; 8,902,760; and/or 9,019,838..Copper port supports full-duplex, auto-MDI/MDI-X, and auto-negotiation.Link Loss Forwarding provides instant notification of fiber segment link problems.Compatible with 802.3af/at standard PoE devices.Power sourcing equipment (PSE) on the copper side to provide up to 30 watts of power.Provides one 10-/100-/1000-Mbps copper port and one 1000Mbps SFP port

The Omnitron iConverter 8201-2 19 module media converter chassis in gray, has Ethernet backplane that allows modules to share data to support a wide variety of network applications. It measures 3.5" x 17.15" x 14" and has IEC 320 socket power connector. The SNMP management via NetOutlook offers real-time port and module status information, remote parameter configuration and trap notification..Media converter Chassis for wide variety of network applications.Dimensions: 3.5"H x 17.15"W x 14"D.Color: Gray.Ethernet backplane: Allows modules to share data to support a wide variety of network applications.Fiber cable management tray available for high-density CWDM deployments.Power: 100 to 240 VAC, 50/60 Hz, 2.5 A at 120 VAC, Output power: 120 W, 36 A at 3.3 VDC, Power connector: IEC 320 socket.SNMP management via NetOutlook provides real-time port and module status information, remote parameter configuration and trap notification.MTBF: 182000 hrs, Temperature: 0 - 50 deg C (commercial), -40 - 60 deg C (wide), -40 - 80 deg C (storage).Meets UL, CE, FCC Class A, NEBS Level 3, RoHS2 (6/6), WEEE, REACH certifications and standards.Weight: 18.5 lbs. (with 2 power supplies).Comes with lifetime warranty

Convert and extend a Gigabit Ethernet connection up to 550m over multimode SC fiber - Provides a cost-effective Ethernet copper to fiber or fiber to copper link - LFP mode on fiber/copper sides - Compact design and wall mountable with easy installation - SC connection (fiber) and RJ45 connection (copper) - Fiber to Ethernet Converter with - 850 nm wavelength - Fiber to Copper Converter / Fiber optic media converter / Fiber to Ethernet Media Converter / Media converter fiber to Ethernet.Converts and extends a Gigabit Ethernet fiber (1000Mbps) network over multimode fiber on 1000BASE-SX networks.Provides a cost-effective Ethernet to fiber/copper to fiber link.Supports a maximum distance of 550 m over multimode fiber-optic cable (SC connection).Compact design and wall mountable.Non-blocking full wire-speed forwarding rate.LED Indicators for simple Ethernet/fiber network link monitoring.850 nm wavelength.Supports IEEE 802.1q Tag VLAN pass-through.Convert and extend a Gigabit Ethernet connection up to 550 m over multimode SC fiber

The Allied Telesis MMC Series of mini media converters leverages its smaller size to not only help the environment with a small carbon footprint, but also to save space in its working environment. Despite its compact size, the MMC Series delivers all the power and functionality of standard size media converters. The MMC Series are available in 100Mbps or 1000Mbps models. Depending on the model chosen, the fiber-optic port has options for fixed SC, ST, LC or SFP connectors capable of multi-mode or single-mode fiber connectivity. The twisted-pair copper port has an RJ-45 connector supporting either 100Mbps or 1000Mbps, with a maximum operating distance of 328'..Smaller size and external power supply of this 10/100/1000T to 1000SX/SC multimode mini media converter allows it to be used almost anywhere.Dimensions: 0.86"H x 2.16"W x 4"D.Rate changing auto negotiation 10/100/1000Mbps on copper port.Supports the transmission of jumbo packets up to 10KB.Transparent to 802.1Q VLAN packets.No need to manually restart/reset after power cuts.Provides low power consumption of just 1.7W.Features Smart MissingLink to aid fault diagnosis.Can be used as a stand-alone converter, wall-mounted, or slotted into an 18-slot chassis.Meets or exceeds the EN, UL, FCC, CISPR 22, C-TICK, VCCI standards

Convert and extend a Gigabit Ethernet connection up to 10km over single-mode SC fiber - Provides a cost-effective Ethernet copper to fiber or fiber to copper link - LFP mode on fiber/copper sides - Compact design and wall mountable with easy installation - SC connection (fiber) and RJ45 connection (copper) - Fiber to Ethernet Converter / Fiber to Copper Converter / Fiber optic media converter / Fiber to Ethernet Media Converter / Media converter fiber to Ethernet.Converts and extends a Gigabit fiber (1000 Mbps) network over single-mode fiber on 1000BASE-LX networks.Provides a cost-effective Ethernet to fiber/copper to fiber link.Supports a maximum distance of 10 km over single mode duplex fiber optic cable (SC connection).Compact design and wall mountable.Non-blocking full wire-speed forwarding rate.LED Indicators for simple Ethernet/fiber network link monitoring.1310 nm wavelength.Supports IEEE 802.1q Tag VLAN pass through.Convert and extend a Gigabit Ethernet connection up to 10 km over single-mode SC fiber

The StarTech MCM10GSFP2 is a high‑performance 10GbE copper‑to‑fiber media converter designed to extend network reach and upgrade existing infrastructure with seamless RJ‑45 to SFP+ connectivity. It converts 2.5G/5G/10GBASE‑T copper Ethernet to 10GBASE‑X fiber through an open SFP+ slot, supporting both multi‑mode and single‑mode SFP+ transceivers such as 10GBASE‑SR or 10GBASE‑LR for flexible deployment across enterprise, telecom, and data‑center environments. Built for reliability and versatility, it supports jumbo frames up to 16K, auto‑negotiation, full‑duplex flow control, and auto MDI/MDI‑X, ensuring smooth integration with mixed‑speed networks. Its compact design allows installation as a standalone unit or mounting on walls, racks, DIN rails, or chassis systems, making it suitable for structured wiring closets and remote network extensions. With low power consumption of just 5.3W via a 5V DC adapter, the device operates efficiently within 0°C to 50°C and includes LED indicators for quick diagnostics. Designed for professional environments, the MCM10GSFP2 delivers stable, plug‑and‑play 10Gbps performance and includes a universal power supply and quick‑start guide for effortless deployment..Delivering reliable wired Ethernet performance, the device supports RJ‑45 copper and SFP+ fiber interfaces along with full Gigabit and multigigabit capability..Delivering high throughput, the data transfer rate reaches up to 10,000 Mbps..Providing essential connectivity, the port configuration includes one RJ‑45 port and one SFP+ slot..Supporting multi‑network environments, compatibility extends to any 2.5G/5G/10GBASE‑T copper device and any 10GBASE‑X SFP+ fiber device..Adhering to global norms, certifications and standards include IEEE 802.3, TAA compliance, and RoHS3 compliance..Limited 2-Year Manufacturer Warranty.

Allied Telesis MMC mini media converters offer a smaller size and smaller carbon footprint to help the environment and save space in the office. Compact size lends to a smaller carbon footprint. Delivers all the power and functionality of standard size media converters.Mini media converter offers a smaller size and smaller carbon footprint to help the environment and save space in the office.Comes in silver.Delivers all the power and functionality of standard-size media converters.Features auto negotiation and auto MDI/MDIX on 10/100 copper port.Supports the industry-standard IEEE 802.1Q specification for Virtual LANs (VLANs).Converts speed as well as media type.Locking power supply jack to prevent accidental power disconnects

Experience fast and reliable wired internet connectivity with the 4XEM USB-A 3.2 to 1 Gbps RJ-45 Ethernet Adapter. Designed for both professionals and everyday users, this compact adapter allows you to easily add a Gigabit Ethernet port to any USB-A-enabled device. With support for USB 3.2 Gen 1 and IEEE 802.3ab (1000BASE-T) standards, you can enjoy data transfer rates of up to 1 Gbps for seamless streaming, gaming, and downloading..It is a USB-A to RJ-45 Ethernet adapter, designed to provide a reliable wired internet connection..Features a Male USB-A connector on one end and a Female RJ-45 Ethernet port on the other end..Adapter outputs through a Female RJ-45 Ethernet port..Adapter is designed specifically for data transfer..It is plug-and-play..It features a compact design and durable construction..Bus-Powered: No external power source required.Comes with a 1-year limited warranty.

The Black Box LinkGain Media Converter provides a reliable solution for extending network connectivity between copper and fiber environments. Featuring auto-sensing 10-/100-Mbps copper ports with MDI/MDI-X support, it ensures seamless integration and flexibility. Link Fault Pass Through (LFP) enhances network resilience by shutting down a link if the opposite side fails. Designed for versatility, it can be used as a standalone unit or rack-mounted in a 16-slot LinkGain chassis. With plug-and-play installation, this converter simplifies deployment for fast, efficient network expansion..Auto-sensing 10-/100-Mbps copper ports feature MDI/MDI-X..Link Fault Pass Through (LFP) shuts down a link if the other side fails..Use as a standalone unit or rackmount in the 16-Slot LinkGain Chassis..Plug-and-play installation.

The ION S3220 is a stand-alone managed Network Interface Device (NID) that provides an interface between 10/100/1000Base-TX ports and 1000Base-SX/LX ports, allowing users to manage their links while integrating fiber optic cabling into 10/100/1000 copper environments. As a remotely managed device, the S3220 can be managed individually via an IP address or it can be managed in-band, over the fiber when linked to a C3220 card installed in a managed ION chassis. With advanced features like IEEE 802.3ah Link OAM, VLAN, QoS, SSH/SSL, jumbo frame support, and bandwidth allocation, the S3220 offers a variety of methods for the secure delivery of Ethernet services in business and mobile backhaul applications..MEF 9, 14 and 21 certified.802.3ah Link OAM.10K Jumbo Frame Support.Built on 32 nm technology and uses a high-k metal gate to enable higher performing transistors on the same node reducing leakage of currents

The SGPAT10xx-105 is a 10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, which easily and affordably facilitates the connection between different types of network cabling, while also injecting PoE+ power through the copper RJ-45 port. Being a Power Sourcing Equipment (PSE) device, the SGPAT media converter combines data received over a fiber optic link with 56VDC input power to provide power and data to a Powered Device (PD) over twisted pair cabling while complying with the IEEE 802.3at PoE+ standard, which is also backwards compatible with the IEEE 802.3af PoE standard. The converter is available in 2-port, 3-port, and 4-port versions and includes PD signature sensing and power monitoring features. Other features include over-current protection, under-current protection, and fault protection input. Active Link Pass Through (ALPT) is supported, which is an automatically activated version of Link Pass Through (LPT) that allows the converter to detect the loss of Receive (Rx) signals on either fiber or copper port and propagate the failure to the end devices, preventing the media converter from isolating those link failures. During a Link Pass Through event, the Auto Power Reset feature will re-set the power to the end PD device, ensuring it is ready to go when the LPT event is corrected..Wall mount, DIN Rail, or table top installation.External AC/DC power supply included with country specific power cord.2-port 10/100/1000 copper to fiber media conversion with IEEE 802.3at PoE+ on the copper port.Supports full 30 Watts of power to each twisted pair port.Various fiber versions available supporting fixed SC, fixed LC, and open SFP slots

Brainboxes Ethernet to digital IO/RS232/switch device server supports fast ethernet technology with 10/100Base-TX network standard. Server delivers uncompromising performance of up to 1 megabaud and is rail-mountable..Serial port, network (RJ-45).Ethernet technology: Fast Ethernet, network standard: 10/100Base-TX, media type supported: Twisted-pair.Interface: 2 x RJ-45, 1 x serial port.Form factor: Rail-mountable.Power consumption: Input: 5 - 30 VDC, 100mA at 24 V 2.5 W (max).Digital inputs: 4, digital output type: Open drain transistor, protected MosFET, short circuit protection up to 36V, over temperature shutdown -175 deg C typical 150 deg C (min).Latched inputs: Triggered by user programmable positive or negative edges, stays true until acknowledged.Counter inputs: User programmable- counts positive or negative transitions up to 100Hz.Watchdog: Active high/low, pulsed high/low.Logic level 0: 0 - 1 V, logic level 1: 2 - 30 V.Maximum output load voltage: 30 - 250 VAC, maximum output current sink: 5.0 A per channel.Operating systems: Windows server 2008 32 bit & 64 bit editions, windows vista 32 bit & 64 bit editions, mac OS X, windows server 2003 32 bit & 64 bit editions, windows XP 32 bit & 64 bit editions, microsoft windows 2000, Linux.Operating temperature: 0 - 60 deg C.Includes Ethernet to digital/RS232/switch, installation CD (manual, Microsoft signed drivers & utilities, quick-start guide).Certifications and standards: CE, CCC-mark, C-TICK, RoHS, WEEE.Warranty: Lifetime limited.Brainboxes Ethernet to digital IO/RS232/switch device server is supported with twisted pair media and has two RJ-45 network ports.