Fiber Optic Cable for 10-Gigabit Ethernet
64 results
The Tripp Lite 33' yellow duplex single-mode fiber optic patch cable features two LC male connectors on both ends for enhanced connectivity. This cable with PVC jacket has beveled edge on ends of glass to make insertion of plug with ease. The patch cable has 8.3/125 um core/cladding dia..Fiber Optic Duplex Patch cable.Features: Zipped.33' Cable.Core / Cladding Diameter: 8.3 / 125 micron.2x LC male to 2x LC Male.Yellow with blue tipped LC connectors.Fiber made from glass (not a polymer).Attenuation loss meets or exceeds the latest industry standards.Twice the bandwidth throughput of multimode cable.Comes with lifetime limited warranty
StarTech.com® 50/125 micrometer Duplex multimode fiber optic cable is 3.28' long and is suitable for high performance patch and fiber data distribution systems. Transmits data at a speed of 10 Gb/s. Cable has male LC network connectors on the first and second end for providing smooth connection between fiber networking devices. Aqua cord cable is suitable for high bandwidth data transmissions over 10 gigabit Ethernet and fiber channel network. Perfect solution for fiber cable that runs between multiple backbone switches, hubs, routers and higher end networking equipment. Molded connector cable has flame retardant low smoke zero halogen jacket for optimal insulation and ensures minimal smoke, toxicity as well as corrosion when exposed to high sources of heat. Compatible with 850nm VCSEL source..Fiber optic cable is suitable for data applications requiring high speed data transmission.A convenient length of 3.28' for ease of installation.Features 2 x LC male network first end and 2 x LC male network second end connectors for secure data transmission.StarTech.com® A50FBLCLC1 3.28' Aqua laser-optimized network cable with LC male connectivity allows you to quickly transfer data. Supports data transfer speed rate of up to 10 Gb/s.
OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.32.8 ft. cable for longer distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty
The AddOn® ADD-LC-LC-5M5OM3 LC-to-LC male/male OM3 duplex fiber optic patch cable in aqua, is suitable for use with 10 Gb Ethernet applications. This cable measuring 5 m uses 850 nm vertical cavity surface emitting laser and it supports 2000 MHz/km effective modal bandwidth at 850nm. The laser optimized multi-mode fiber cable has low smoke zero halogen jacket, which provides protection from toxic and corrosive gases in badly ventilated spaces. This patch cable is backward compatible with existing 50/125 equipment, The cable is perfect for use with LANs or SANs and for connecting fiber patch panels, hubs, switches, media converters and routers..Patch cable for LANs or SANs and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Cable length: 5 m.Connections: 2 x LC male to 2 x LC male.Wired connectivity.Material: LSZH (jacket), conductor: Copper.Network: Gigabit Ethernet.Fiber type: LOMM.Core/cladding diameter: 50/125 um.Compatible with M7100 - 24X managed switch - (XSM7224-v1h1).Standard: OM3.It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduits.They provide higher speeds and increased bandwidth compared to conventional twisted-pair copper cable.Comes with limited lifetime warranty.Aqua 5 m fiber optic patch cable with LC connectors and low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.
OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single Mode OS2 Fiber Cable is optimized for 100G Networks; Ideal for connecting between servers/switches and data center equipment.131 ft. cable for long distance application.This cable is Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty
OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.16.4 ft. cable for longer distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty
The Multi Mode OM4 cables are designed to support high transfer speed, the cables are capable of supporting up to 100Gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Designed for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, ensuring maximum performance for mission-critical applications.Generous 9.84ft (3m) length provides flexibility for longer runs while maintaining excellent signal integrity.LC to LC connectors deliver secure, precise, and low-loss optical signal transmission for reliable connectivity.Built with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable PVC jacket and a turquoise finish for easy identification in complex setups.Supports high-bandwidth applications including 40G/100G Ethernet, making it ideal for next-generation networking.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, ensuring top-tier quality and reliability.2 Years Manufacturer's Warranty
OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 32.8ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant, Passive.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime
OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.3.28 ft. cable for short distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty
OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 65.6ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 32.8ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime.Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enhance the performance capabilities of CWDM applications over an OS2 fiber network
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.9.48 ft. for short distance application.This cable is Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty.This 9/125µm Single Mode fiber cable supports 1260-1625nm laser-optimized sources and is ideal for critical connections between servers, switches, and data center equipment. It is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Enhance the performance capabilities of CWDM applications over an OS2 fiber network
OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 16.4ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime.Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enhance the performance capabilities of CWDM applications over an OS2 fiber network
OS2 SC to SC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 SC to SC Single Mode Simplex Fiber Optic Patch cable for use in 40/100 Gigabit Ethernet and fiber-channel applications.328 ft. fiber optic cable for long distance application.This cable is Passive, Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty
The Tripp Lite 1 m aqua duplex multimode 50/125 OM4 LSZH fiber patch cable is ideal for fiber channel SAN applications. It offers 40/100 Gigabit Ethernet speeds up to 300 m. It has sturdy dual LC male connectors at both ends to ensure fast, clear signal transmission with less insertion loss. It has a low-smoke, zero-halogen jacket for durability. This versatile cable is backward compatible with existing 50/125 fibers. It is suitable for LANs, SANs and high-speed parallel interconnects. It meets current IEEE 802.3ae and TIA LOMMF standards..Type: Patch cable - OM4.Technology: Fiber optic.Type of Fiber Optics: Multimode.Features: Laser-optimized multimode fiber (LOMMF).Length: 3.3 ft.Core / Cladding Diameter: 50 / 125 micron.Connectors: 2 x LC multi-mode - male.Connectors (Other Side): 2 x LC multi-mode - male.Color: Aqua.Manufacturer Warranty: Limited lifetime warranty.Comes with lifetime limited warranty.40/100 Gb/s Ethernet speed up to 300 m (at 850 nm) for communication.Has nearly three times the bandwidth of conventional 62.5 um multimode fiber.Commonly used with VCSEL and LED laser light sources
OS2 SC to SC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Network fiber optic cable optimized for 40G/100Gbps networks; Supports bi-directional (BiDi) transmission over a single fiber; Ideal for space-constrained installations requiring minimal fiber count.98.4 ft. fiber optic cable for longer distance application.This cable enables safer cable installations in areas with poor ventilation and is safe to use in any application. It features Ultra Physical Contact (UPC), Bend Insensitivity, Flame Retardant, Bend Resistance and EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty