Fiber Optic Cables for LAN

Fiber optic LC Male/LC Male.Ultimate solution for high-speed, long distance, data transmissions.3.3'

Aqua.Fiber optic LC Male/LC Male.Designed for use in 10-gigabit Ethernet applications

Includes 10' duplex MMF cable LC/LC 62.5/125 fiber cable..Orange.Fiber optic LC male/LC male.Duplex multimode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket, glass fiber.Applications: Computer networking (fiber).System requirements: Any fiber optic hardware or NIC card requiring multimode Duplex cable with SC/LC connectors.Core/cladding diameter: 62.5/125 micron m.Fiber optic mode: Multimode.Network speed: 1 Gbps.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.color-coded shrouds identify transmit and receive.Compliant and standards: FDDI and OFNR.Warranty: Lifetime limited

Because of its immunity to electronic interference and its greater speeds over longer distances, fiber optic cabling has become the conduit of choice for high speed network communications. Monoprice is proud to offer a full line of high-quality Single-mode and Multi-mode duplex cables using optical fibers made by Corning. This is an OM1 "Orange" multi-mode cable with a 62.5 ?m core and 125 ?m cladding diameter. The cable has a pair of color-coded ST connectors on each end. The cable jacket is OFNR (Optical Fiber, Non-conductive, Riser) rated by UL, which means that it complies with fire safety and insurance requirements and is safe for use within the walls, and between the floors, of commercial class buildings..Delivers fast data transfer and optimal signal quality.Constructed with durable materials for long-lasting use.Slim design ensures easy installation and space efficiency

Fiber optic patch cable..Yellow.Fiber optic LC male/LC male.Duplex multimode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket, glass fiber.Applications: Networking equipment that requires single mode fiber optic patch cables

Aqua fiber optic LC male/LC male duplex patch cable is backward compatible with legacy LAN's..16'.Applications: For use with 10-gigabit ethernet equipment.Core/cladding diameter: 50/125 microm.Dimensions: 2"H x 4"W.Beep: Indicates volume level, microphone mute and others.Sound: Mic noise canceling, sixth generation echo cancellation, tone control, crystal clear sound and voice (DSP).Talk time: 21 hrs, 500 hrs stand by time, 300 mAh battery

Duplex patch cable..Aqua.Fiber optic LC male/LC male.Backward compatible with legacy LAN's.10'.Device supported: Network device.Applications: For use with 40/100 gigabit ethernet equipment.Jacket type: LSZH.Core/cladding diameter: 50/125 microm.Fiber optic mode: Laser-optimized multimode fiber (LOMMF).Network speed: 10 Gbps / 40 Gbps / 100 Gbps.40/100Gb ethernet speed to 300 meters at 850 nm.Includes 10' duplex multimode 50/125 aqua OM4 fiber patch cable, LC/LC.Compliant and standards: OM4 rated, TIA LOMMF and RoHS compliant.Warranty: Lifetime limited

StarTech Multimode 62.5/125 Duplex Fiber Patch Cable LC LC Network Cable 3.3 Ft Orange.Type: Network cable.Technology: Fiber optic.Type of Fiber Optics: Multimode.Features: Riser.Length: 3.3 ft.Core / Cladding Diameter: 62.5 / 125 micron.Connectors: 2 x LC multi-mode, male.Connectors (Other Side): 2 x LC multi-mode, male.Color: Orange.Manufacturer Warranty: Limited lifetime warranty.Multimode duplex fiber optic network cable provide connection between fiber networking devices for high-speed, long distance networks.

Fiber optic patch cable..Yellow.Fiber optic LC Male/SC Male.Duplex singlemode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket.Applications: Networking equipment that requires single mode fiber optic patch cabling.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/SC connectors.Diameter: 9 microns core, 125 microns clad.Fiber type: Glass.Beveled edge on ends of glass makes insertion of plug a breeze.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Includes duplex fiber optic patch cable, 10' duplex singlemode fiber patch LC/SC cable.Compliant and standards: FDDI, OFNR.Warranty: Lifetime limited

Connect fiber network devices for high-speed transfers with LSZH rated cable. The SMFIBLCSC1 1m LC to SC Single-Mode Duplex Fiber Cable features 9/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex single-mode applications. This LC-SC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire - an ideal solution for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration. Each Duplex 9/125 (OS1) Single-Mode Fiber Patch Cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability, and is backed by our lifetime warranty..Guaranteed reliability.Suitable for installations under restrictive building codes, with LSZH rating.Cable Length: 3.28 ft

Ideal solution for data applications requiring high speed data transmission and fiber connections in patch panels, hubs, switches, and routers..Aqua.Fiber optic/2 x LC male network first and second end.Use in gigabit Ethernet and fiber channel applications.9.84'.Type: Singlemode, Technology: Fiber optic.Core/cladding diameter: 50/125 micron.Jacket type: LSZH rated (low smoke zero halogen).Attenuation loss meets or exceeds industry standards.Molded connectors.Certifications and standards: RoHS.Weight: 1.6 oz..Warranty: Lifetime limited

Because of its immunity to electronic interference and its greater speeds over longer distances, fiber optic cabling has become the conduit of choice for high speed network communications. Monoprice is proud to offer a full line of high-quality Single-mode and Multi-mode duplex cables using optical fibers made by Corning. This is an OM3 "Aqua" laser-optimized, multi-mode cable with a 50 ?m core and 125 ?m cladding diameter. The cable has color-coded Dual LC connectors on each end and is ideal for use in 10 Gigabit Ethernet (GbE) networks. The cable jacket is OFNR (Optical Fiber, Non-conductive, Riser) rated by UL, which means that it complies with fire safety and insurance requirements and is safe for use within the walls, and between the floors, of commercial class buildings..Supports fast data transfer and efficient power delivery.Built for durability with high-quality materials.Compact design simplifies installation and saves space

Tripp Lite Duplex singlemode fiber patch cable has beveled edge on ends of glass that makes insertion of plug a breeze and color coded to identify transmit or receive. Cable has insertion loss testing performed on connector and provided with cable..Fiber optic.Beveled edge on ends of glass makes insertion of plug a breeze.3.28'.Yellow.Material: Polyvinyl chloride PVC jacket.Connections: 2 x LC male to 2 x LC male.Core/cladding diameter: 9/125 microm.Applications: Networking equipment that requires singlemode fiber optic patch cables.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/LC connectors.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Fiber made from glass.Color coded shrouds identify transmit and receive.Fiber optic distributed data interface (FDDI) rated.Includes 3' duplex singlemode fiber patch cable, LC/LC.Certifications and standards: FDDI, OFNR.Warranty: Lifetime limited.Tripp Lite Duplex singlemode 8.3/125 fiber patch cable measuring 3' is made of durable glass and provides twice bandwidth throughput of multimode.

The Cisco™ SFP-10G-AOC1M= SFP+ 3.28' fiber optic network cable features one SFF-8431 SFP+ network connector on both ends. Cable in beige, is perfect for applications requiring high bandwidth. It withstands temperature range of 23 to 158 deg F..Network cable for home or office applications.Dimensions: 3.28' cable.Color: Beige.Interface/ports: One SFF-8431 SFP+ network connector on both ends.Cable type: Fiber optic.Temperature: 23 - 158 deg F operating.Meets RoHS, MSA, UL E116441 and ELV certifications and standards

HP® Premier Flex 6.56' LC Male/Male fiber optic cable features LC male network connectors. Cable measures 12" x 10" x 0.5" and can be used for networking and servers..LC Male/Male.6.56'.Device supported: Network device.Fiber optic mode: Multi-mode.Weight: 15.87 oz..HP® Premier Flex 6.56' LC Male/Male fiber optic cable measuring 6.56' is compatible with HP blade systems and disk storage systems.

Tripp Lite 2M Fiber optic duplex patch cable in aqua color allows serial transmission over extended distances in 850 nm wavelength window. Cable features high-speed parallel interconnects for head-ends, central offices and data centers..Aqua.Fiber optic LC Male/LC Male.Ideal for fiber-channel (SAN) applications.6'.Applications: Computer networking (fiber).Core/cladding diameter: 50/125 microm.Tripp Lite 2M Fiber optic duplex patch cable in aqua color is designed to use with 10GB Ethernet applications and has zero halogen aqua jackets.

Ideal solution for data applications requiring high speed data transmission and fiber connections in patch panels, hubs, switches, and routers..Yellow.Fiber optic/2 x LC male network first and second end.Use in gigabit Ethernet and fiber channel applications.3.28'.Type: Singlemode, Technology: Fiber optic.Core/cladding diameter: 9/125 micron.Jacket type: LSZH rated (low smoke zero halogen).Attenuation loss meets or exceeds industry standards.Molded connectors.Certifications and standards: RoHS.Weight: 0.7 oz..Warranty: Lifetime limited.Warranty: Lifetime limited

AddOn 15m LOMM OM4 fiber optic male LC/LC duplex patch cable in aqua color features low-smoke zero-halogen jacket that protects from toxic and corrosive gases. Cable is recommended for connection between fiber patch panels, hubs and switches..LC Male.Suited for shorter reach data center LAN's or SAN's, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc.15m.40Gb Ethernet, multimedia, or communication applications, and provides extended bandwidth over OM3 cable.Connector on first end: 2 x LC male network.Connector on second end: 2 x LC male network.Fiber optic: Fiber optic, cable characteristic: Patch cable, fiber optic mode: Multi-mode, core/cladding diameter: 50/125 micro meter, device supported: Network device.Aqua.Device supported: Network device.High-quality LOMM (50/125) patch cable is specifically designed for 40Gb Ethernet, multimedia, or communication applications, and provides extended bandwidth over OM3 cable.High bandwidth provided by OM4 fiber provides extra headroom for channel insertion loss.100% RoHS compliant for all of your networking needs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.It is designed to enhance the system cost benefits enabled by 850 nm Vertical Cavity Surface Emitting Lasers for existing 1 and 10 Gb/s applications, as well as future 40 and 100 Gb/s systems. when used at less than rated distance environments.Warranty: Lifetime limited.AddOn 15m LOMM OM4 fiber optic male LC/LC duplex patch cable in aqua color offers backward compatibility with existing 50/125 equipment and provides the fire protection needed to run within walls.

The AddOn 32.8' laser optimized multi-mode fiber duplex LC/LC OM4 aqua patch cable is perfect for use with 10GB Ethernet applications. It offers connections between fiber patch panels, hubs, switches, media converters, routers and more. It features a low smoke zero halogen jacket to protect from toxic and corrosive gases. This patch cable works for LANs or SANs and renders high speed and increased bandwidth..Laser optimized multi mode fiber duplex OM4 patch cable is suitable for Ethernet, multimedia or communication applications.Cable length: 32.8'.Connections: two LC male network on both ends.Low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces.RoHS and green compliant.Core/cladding diameter: 50/125 u m.Comes in aqua color.Fiber termination: Ultra physical contact (UPC).Suitable for use with UCS C460 M4 rack mount server with DDR3, DDR4 memory.Offers the fire protection needed to run within walls.Perfect for LANs or SANs, recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Comes with lifetime warranty

StarTech FIBLCLC3 3m Multimode 62.5/125 Duplex Fiber Patch Cable LC to LC.Can maximize wiring conduit usage while minimizing installation problems.Fiber optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high- speed data transmission.Cool/no heat so it doesn't destroy heat-sensitive papers.No warm-up or waiting, no odors.portable and compact for desktop operation, weighs only 8 1/2 lbs..Easy-to-use for goof-proof operation.Refills quickly with Scotch® refill cartridges.18-foot dual-laminate starter cartridge included.White.Max pouch thickness: Up to 9.2 mil.Throat width: 8 1/2".Laminating style: Cold.Perfect lamination without electricity.Safe, heat-free and easy to use, with no warm-up waiting time, no fumes and no mess.Ideal for posters, banners, artwork, signs, menus, maps and more.Fully compatible with inkjet, thermal and other sensitive papers.For documents up to 8 1/2" wide, 1/10" thick and 90-ft.long.Features easy-loading cartridge, adjustable input tray

Compared to conventional twisted-pair copper cable, this LC-LC OM4 AddOn® 9.84' aqua fiber optic patch cable offers higher speeds and increased bandwidth. Multi-mode, LC/LC OM4 cable is suitable for use with 10GB Ethernet applications. The low smoke zero halogen jackets protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It is specifically designed for Ethernet, multimedia or communication applications. The patch cable provides backward compatibility with existing 50/125 um equipment..Laser optimized multi-mode fiber patch cable is specifically designed for Ethernet, multimedia, or communication applications.9.84' long for easy installation.Two LC male x two LC male connector provides the necessary connection between fiber networking devices.Designed for use with 10GB applications.Low smoke zero halogen jacket provides protection against toxic and corrosive gases in badly ventilated spaces and other most crucial areas.Meets RoHS, Green compliance and OM4 certified.Patch cable with fiber core/cladding diameter of 50/125 um has UPC termination to ensure secure connection.Laser optimized multimode fiber is built for speed and supports network device.Comes in aqua color.Duplex fiber optic cable offers simultaneous, bidirectional data transfer.Well suited for LANs or SANs and used for connection between fiber patch panels, hubs, switches, media converters and routers, etc.Provides fire protection needed to run within walls and air plenums eliminating the need for conduits.Offers higher speeds and increased bandwidth compared to conventional twisted pair copper cable.Comes with lifetime warranty.The AddOn® LC-LC OM4 9.84' aqua fiber optic patch cable offers fire protection needed to run within walls and air plenums terminating the need for conduits.

The Monoprice 6.56 ft. OM3 LC to LC Duplex Multimode 50/125 Fiber Optic Network Cable (6386) delivers fast, high‑bandwidth 10Gb data transmission for enterprise networks, server rooms, data centers, and high‑performance telecom environments. Designed with premium Corning®‑grade 50/125 µm multimode fiber, this OM3‑rated cable ensures low‑loss, high‑integrity signal performance over short‑to‑medium distances, making it ideal for SANs, backbone connections, and high‑capacity switch‑to‑switch links. Its LC‑to‑LC duplex connectors provide secure, reliable mating with modern networking hardware, while the durable aqua OFNR‑rated jacket ensures safe installation in riser spaces and structured cabling infrastructures. Engineered for reliability and long‑term durability, this Monoprice fiber optic patch cable delivers industry‑proven optical clarity, strong attenuation control, and top‑tier performance for demanding 10Gig networking applications. [order.icintracom.com], [spacebound...utions.com]0.Supports fast data transfer and efficient power delivery.Built for durability with high-quality materials.Compact design simplifies installation and saves space

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 26.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

The Tripp Lite yellow 26.25' patch cable quickly transmits clear data signals through LAN with a higher operating bandwidth. This single-mode fiber optic patch cable has two LC male on first end and two LC male on second end for connectivity. It has core/cladding diameter of 8.3/125 um and features durable PVC jacket for added protection. It supports network device, patch panel and switch. It delivers twice the bandwidth throughput of multimode cable. It has beveled edge on glass ends for easy plug insertion into patch panel or switch..Single-mode fiber optic patch cable transmits fast, clear data signals through LAN with a higher bandwidth.Cable length: 26.25'.Connections: Two LC male on both ends.Connectivity: Wired.PVC jacket for added safety.Meets RoHS, OFNR certifications and standards.Comes in yellow color.Core/cladding diameter: 8.3/125 um.Supports network device, patch panel and switch.Beveled edges on glass ends offer easy insertion into a patch panel or switch.Zip cord for easy plug insertion.Comes with lifetime limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 6.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 16.4'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

Tripp Lite® 2 m Duplex multimode fiber optic patch cable in in aqua color has LC male/male connectors on first and second end. Economical cable features high-speed, high-bandwidth and is used with VCSEL, LED laser light sources..Aqua.Cable type: Fiber optic.Cable length: 2m.Material: Low smoke zero halogen (LSZH) - jacket.Connector details: 2 x LC male IEEE 802.3ae network on first and second end.Fiber optic mode: Multi-mode.Features: Laser-optimized multimode fiber (LOMMF), high speed, high bandwidth, low-cost.Core/cladding diameter: 50/125 micrometer, backward compatible with legacy LAN's, Network speed: 10Gbps/40Gbps/100Gbps.Application: Computer networking.LOMMF cable allows 10Gb serial transmission over extended distances in the 850nm wavelength window, where low-cost Vertical Cavity Surface Emitting Lasers (VCSELs) enable a cost-effective, high bandwidth solution.Use with VCSEL and LED laser light sources and ideal for fibre channel (SAN) applications.Certification and Standards: OM4 rated, TIA LOMMF compliant, RoHS.Warranty: Lifetime limited.Tripp Lite® 2 m Duplex multimode fiber patch cable in aqua color has LC male/male connectors and is used for fiber channel applications.

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 19.7'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 65.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech FIBLCST3 3m Multimode 62.5/125 Duplex Fiber Patch Cable LC-ST.Fiber optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high- speed data transmission.Attenuation loss meets or exceeds industry standards.Backed by StarTech.com lifetime warranty.Attenuation loss meets or exceeds industry standards

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 9.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length: 3.3'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 49.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 22.9'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

The HP® QK735A PremierFlex fiber optic cable is 15 m long and features LC male connector at both the ends to establish connection between fiber network devices for high-speed data transfer. It is compatible with HP DC SAN director switches, HP SN6000 fiber channel switch and HP StorageWorks MPX200 multifunction router..Fiber optic cable establishes connection between fiber network devices.Cable length: 15 m.Connections: LC male to LC male.Wired connectivity.REACH compliant.Compatible with HP DC SAN director switches, HP SN6000 fiber channel switch, HP StorageWorks MPX200 multifunction router.15 m fiber optical cable is compatible with HP DC SAN director switches, HP SN6000 fibre channel switch.

Information carried in the form of light provides a vast array of features and benefits. Superior Transmission Distance. It is not unusual for optical systems to go over 100 kilometers (km), or about 62 miles. Enhanced Security. It is impossible to remotely detect a signal being transmitted within a fibre cable. The only way to do so is by actually accessing the optical fibre itself. This makes fibre extremely attractive to governmental bodies, banks and other businesses with major security concerns. No Metallic Components. Fibre optic cable can be installed in areas with electromagnetic interference (EMI). This includes areas around utility lines, power-carrying lines and railroad tracks. fibre is also ideal for areas of high lightning-strike incidence..Supports fast data transfer and efficient power delivery.Built for durability with high-quality materials.Compact design simplifies installation and saves space

Because of its immunity to electronic interference and its greater speeds over longer distances, fiber optic cabling has become the conduit of choice for high speed network communications. Monoprice is proud to offer a full line of high-quality Single-mode and Multi-mode duplex cables using optical fibers made by Corning. This is an OM3 "Aqua" laser-optimized, multi-mode cable with a 50 ?m core and 125 ?m cladding diameter. The cable has color-coded Dual LC connectors on each end and is ideal for use in 10 Gigabit Ethernet (GbE) networks. The cable jacket is OFNR (Optical Fiber, Non-conductive, Riser) rated by UL, which means that it complies with fire safety and insurance requirements and is safe for use within the walls, and between the floors, of commercial class buildings..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 32.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

The Monoprice 6.56 ft. LC‑to‑SC Multimode Duplex Fiber Optic Cable (6391) delivers high‑performance data transmission for network backbones, server rooms, telecom equipment, and high‑speed enterprise connections. Designed with 50/125 multimode fiber, this cable supports fast, reliable optical signaling ideal for Gigabit and 10‑Gigabit applications. The LC‑to‑SC connector configuration provides broad compatibility with switches, patch panels, and fiber network devices, while the duplex design enables simultaneous bidirectional communication. Its aqua‑colored jacket helps with quick identification in dense cabling environments, and the precision‑engineered connectors ensure low insertion loss and stable performance. At 6.56 feet, this fiber cable is perfect for short‑run connections that require clean, efficient, and high‑integrity optical data transfer..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

Made from 50/125 zip cord fiber, the Tripp Lite Patch Cable features thoroughly tested dual LC connectors at each end which have minimum insertion loss. It is backwards compatible with 6.2 micron fiber and is equipped with built-in headroom for future applications. The cable is optimized for higher Gigabit and 10 Gbps networks with higher bandwidth capabilities. Beveled edges of the adapter are color coded for an easy and secure connection throughout your network..LCM/LCM fiber optic patch cable for efficient and high speed data transmission.Dual LC Male connectors for greater compatibility.Made from glass graded index fiber for minimum signal loss.OFNR rated PVC Jacket ensures durability.Compliance Standards: RoHS qualified.Comes with a limited lifetime warranty.The orange Tripp Lite 10' Duplex Fiber Optic LCM/LCM Patch Cable is optimized for high data transfer speeds of 1 Gbps making it a great choice for data centers and network applications.

2 Ports.Unmanaged switch.Cable length: 3.28'.Connector on first end: 2 x LC male network.Form factor: desktop.Connector on second end: 2 x sc male network.Device supported: network device.Fiber optic mode: single-mode.Cable characteristic: patch cable

The HP® K2Q47A fiber optic network cable is 49.21' long and has MPO male connector on first end and LC male connector on the second end. It is compatible with HP FlexFabric 12900 switch..Network cable used for network device.49.21' long cable.Has MPO male connector on first end and LC male connector on second end.RoHS compliant.Fiber optic cable.Compatible with HP FlexFabric 12900 switch

Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment. This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration. Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability. The 450FBLCLC1 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF)

StarTech Multimode LC/UPC to LC/UPC OM4 fiber optic cable enables 40/100G network connections. The push-pull tabs on each connector ensure quick connection and removal, facilitating accurate installation in high connection density environments. The bend-insensitive fiber and molded strain reliefs support cable runs requiring micro/macro bends while maintaining low attenuation. The retractable strain-relief housings enable toolless in-field polarity swapping. Color-coded LC-Duplex connectors ensure error-free polarity configuration..Multimode OM4 fiber optic cable enables 40/100G network connections.Cable length is 26.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in aqua with straight white connectors.Supports 10/40/100G networks; backward compatible with OM3.Can be uses in 40/100 Gigabit Ethernet and fiber architecture.High micro-bending resistance facilitates tight bends in intricate environments, perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.Push-pull tab design provides easy access for precise insertion/removal in high-density installations.Retractable connector housings for toolless polarity swapping.LC/LC-UPC ends for improved return loss over PC polish.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend.Safe for enclosed/poorly ventilated spaces.Great for 850nm and 1300nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and LED sources.Color-coded LC-Duplex connectors ensure error-free polarity configuration.Lifetime manufacturer limited warranty

The HP® Premier Flex 1 m aqua multimode OM4 2 fiber optic network cable features LC male/male connectors on both ends for enhanced connectivity. This cable is suitable to work with HP DC SAN director switches, HP SN6000 fiber channel switch and HP StorageWorks MPX200 multifunction router..Fibre optic network cable for network devices.Cable length: 1 m.Connections: LC male/male on both ends.Connectivity: Wired.Meets REACH, TIA/EIA-568-B.2-10 certifications and standards.Color: Aqua.Compatibility: HP DC SAN Director Switches, HP SN6000 Fibre Channel Switch, HP StorageWorks MPX200 Multifunction Router

The AddOn® ADD-LC-LC-5M5OM3 LC-to-LC male/male OM3 duplex fiber optic patch cable in aqua, is suitable for use with 10 Gb Ethernet applications. This cable measuring 5 m uses 850 nm vertical cavity surface emitting laser and it supports 2000 MHz/km effective modal bandwidth at 850nm. The laser optimized multi-mode fiber cable has low smoke zero halogen jacket, which provides protection from toxic and corrosive gases in badly ventilated spaces. This patch cable is backward compatible with existing 50/125 equipment, The cable is perfect for use with LANs or SANs and for connecting fiber patch panels, hubs, switches, media converters and routers..Patch cable for LANs or SANs and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Cable length: 5 m.Connections: 2 x LC male to 2 x LC male.Wired connectivity.Material: LSZH (jacket), conductor: Copper.Network: Gigabit Ethernet.Fiber type: LOMM.Core/cladding diameter: 50/125 um.Compatible with M7100 - 24X managed switch - (XSM7224-v1h1).Standard: OM3.It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduits.They provide higher speeds and increased bandwidth compared to conventional twisted-pair copper cable.Comes with limited lifetime warranty.Aqua 5 m fiber optic patch cable with LC connectors and low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.

The Tripp Lite 50' aqua OM4 duplex fibre optic patch cable is the perfect solution for networks that require instant and clear signal transmission. This multimode optic patch cable has two LC male connectors on both ends. Featuring a low-smoke, zero halogen (LSZH) jacket, this optic cable maintains integrity, even when bent with abrasion-resistant. The patch cable with 50/125 u m core/cladding diameter, is suitable for LANs, SANs and high-speed parallel interconnects for head-ends, central offices as well as data centers..Fiber optic patch cable is ideal for LANs, SANs and high-speed parallel interconnects for head-ends, central offices and data centers.Cable length: 50'.Connections: Two LC male on both ends.Glass fiber construction and low smoke zero halogen (LSZH) jacket for durability.Comes in aqua color.Network speed: 10/40/100 Gbps.Data transfer rate: 12.5 GBps.Core/cladding: 50/125 u m.Allows 40/100 Gb serial transmission up to 300 m (at 850 nm).Commonly used with VCSEL and LED laser light sources, sturdy dual LC male connectors meet insertion loss standards.Provides 10x more bandwidth than conventional 62.5 u m multimode fiber.Backward compatible with existing 50/125 fiber.Meets IEEE 802.3ae, TIA LOMMF and RoHS certifications or standards.Comes with lifetime limited warranty

AddOn 6.5' Optic patch cable comes with low smoke zero halogen jacket and supports network devices. Cable with 2 x LC male connectors on both sides provides higher speeds with increased bandwidth and is ideal for LAN or SAN connectivity..2 x LC male/2 x LC male.Molded.Cable Length: 6.5'.Jacket material: Low smoke zero halogen.Cable type: Fiber optic.Yellow.Device supported: Network device.Core/Cladding diameter: 9/125 micrometer.Fiber optic mode: Single-mode.Fiber Qty: 2.Specifically designed for ethernet, multimedia, or communication applications is intended for use with 10Gb applications.Suited for LAN's or SAN's is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Low-smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduit.Injection molding process provides each connection greater durability in resisting pulls, strains, and impacts from cabling installs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.100% optically tested for insertion loss.Warranty: 3 years limited.AddOn 6.5' Optic patch cable in yellow color adds perfect choice for ethernet, multimedia or communication and 10GB applications and offers fire protection.