10 Gbps Data Transfer Cable

Make compatibility and setup the easy part. Cisco 10m SFP+ Twinax Network Cable, Black (LB7335) with a 10m length (key specs: 10 m). Use it for presentations, monitor hookups, or quick replacements to keep teams moving. Simple to integrate and dependable for daily use..Reliable SFP connection to keep video, data, or audio running smoothly.10 m length reaches from desk to display or rack without tight bends or strain.Great for standardizing conference rooms, desks, and IT closets with easy-to-swap replacements.Sturdy jacket helps resist everyday wear from routing, rolling chairs, and cable pulls.Conductor: Copper.American wire gauge (AWG): 28.Features: Active cable (signal regeneration).Environmental parameters: Min operating temperature 32 degree F, Max operating temperature 158 degree F.Compatible with: Cisco Nexus 2000 Switch, Cisco Nexus 5000 Switch.Type: CU.Reliable signal and power you can count on (10m)—built for everyday office and IT setups.

Cisco SFP-H10GB-CU1M 3.3' Twinaxial cable features optical interoperability with 10GBASE XENPAK, 10GBASE X2 and 10GBASE XFP interfaces on the same link. Has digital optical monitoring capability for strong diagnostic capabilities. Supports Cisco SFP+ modules are supported on a wide range of Cisco switches and routers. Cable benefits industry's smallest 10G form factor for greatest density per chassis. SFP Cable is compatible with Cisco modules..Passive network cable is perfect for network modules.Comes in black color.Compatible with SG500X series.Cable length: 3.28'.Connector on first end: 1 x SFP+, connector on second end: 1 x SFP+.Copper conductor.Technology: Twin axial.Cisco 3.3' Twinaxial cable offers a wide variety of 10 Gigabit Ethernet connectivity options for data centre, enterprise wiring closet and service provider transport applications.

Cisco® Active twinax 7m cable assembly having a 10G ethernet protocol has 2 x SFP+ ports consists of 24AWG copper conductor. Features Cisco® 10GBASE SFP+ modules and has 10G form factor and supports digital optical monitoring capability..Length: 22.97'.30 AWG.1000 Base.Cisco® Active twinax 7m cable assemblies provide 10 Gigabit Ethernet options for data centres, enterprise wiring closets and service provider transport applications.

The StarTech N6PATCH100BL CAT-6 Cable offers reliable Ethernet connectivity between your system and a router, switch or hub. Both ends of this networking cable play host to RJ-45 male connectors for seamless connection between devices. It has a durable and good-quality PVC jacket that preserves the integrity of the high-quality copper conductor..Capable of transmitting data at 10000 Mbps.Gold-plated RJ-45 male connectors on both sides for easy connectivity.100' CAT-6 to ensure convenient tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty.The StarTech N6PATCH100BL 100' CAT-6 Patch Cable, Blue, is ideal for 10 Gigabit Ethernet networks and provides dependable data transfer.

For use in 10Gbps ethernet and fibre channel applications..SFP+/SFP+.Fully compliant to MSA SFF-8431 specification.3.28'.Connector on first end: 1 x SFF-8431 male SFP+.Connector on second end: 1 x SFF-8431 male SFP+.Conductor: Copper.Reach: 1 m.Equivalent to Cisco SFP-H10GB-CU1-5M.100 ohm twinaxial cable, diecast metal shells, pull-to-release latching.Support for 1x, 2x, 4x and 8x fiber channel data rates.Device supported: Network device.Designed for: Cisco Catalyst 2960, 2960-24, 2960-48, 2960G-24, 2960G-48, 2960S-24, 2960S-48.Hot pluggable SFP 20pin footprint.Low power consumption, intended application 10Gbps hardware interconnection.Package includes: 1 m 30 AWG SFP+ high speed passive copper 10Gbps cable, System requirements: SFP+ Direct Attach Cable ( DAC ) twinaxial cables conform to SFF-8431 standards.Green Compliant: Yes, Green Compliance Certificate/Authority: RoHS.Warranty: Lifetime limited

Dell EMC DAC-SFP-10G-1M Compatible 1m 10G SFP+ to SFP+ Direct Attach Cable Twinax - 10GbE SFP+ Copper DAC 10 Gbps Low Power Passive Mini GBIC/Transceiver Module DAC (DACSFP10G1M).100% DELL EMC DAC-SFP-10G-1M COMPATIBLE DAC: 10G direct attach cable works with Dell EMC switches and is MSA compliant.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself, not the life of your switch; our modules won't void your OEM warranty and supported by our Tech Advisors 5/24.TECHNICAL SPECS: 1m (3.3ft) | 10 Gbps | Passive Twinax (Copper) | 2 x SFP+ Pluggable Connector | 100 Ohm Impedance | 30 AWG Wire Gauge | PVC Cable Jacket | Hot swappable | MSA Compliant.TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Dell EMC routers and switches.WORKS WITH MSA COMPLIANT SWITCHES: Low power 10GbE DAC also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules and transceivers.10 Gbps | Passive Copper Cable | 1 m (3.3ft) | Lifetime Warranty

Juniper® EX-SFP-10GE-DAC-5M Network cable has SFP+ passive twinax connector type for reliable operation. With 16.4' long, this cable has copper conductor for high conductivity. This cable with supply voltage of 3.3 V consumes a power of 0.57 W and has characteristic impedance of 100 Ohms. Hot-removable cable allows you to disrupt the cable without powering OFF the switch. Deployed with full-duplex serial transmission, cable transfers at a speed of 10 Gb/s..Twinax cable for easy signal transmission.Compatible with Juniper Networks EX2500 ethernet switch.Has cable length of 16.4' for convenience.Has supply voltage of 3.3 V for optimum device performance.Provides copper conductors for high conductivity.Has SFP+ connector on first end that provides highest flexibility for network.Has 10- Gb/s full-duplex serial transmission data transfer rate and wire accommodates a size of 24 AWG.Has minimum cable bend radius of 1", cable characteristic impedance of 100 Ohms and 2% maximum crosstalk.Has power supply of 0.57 W for improved reliability.Has storage temperature of -40-85 deg C for precise operation.Time delay: 1.31 nsec/ft.Rate: 10 Gb/s full-duplex serial transmission.Connector type: SFP+ passive twinax cable assembly.Wire AWG: 24 AWG.Minimum cable bend radius: 1".Juniper® SFP+ Ethernet attach copper twinax cable of 16.4' long works at a data transfer speed of 10 Gb/s. Reduces crosstalk between pairs and accommodates wire of 24 AWG.

The cisco 10GBASE SFP+ modules offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Compatibility: Cisco 10GBASE SFP+ modules.Smallest 10G form factor.Cable length: 3 m.Temperature: 32 - 158 deg F commercial.Supports digital optical monitoring capability.Bail latch color: Orange.Supports the cisco quality identification (ID) feature that enables a Cisco switch to identify whether the module is certified and tested by Cisco.Cable type: Twinax cable, passive, 24 AWG cable assembly.Provides flexibility of interface choice.90 days limited warranty.Orange SFP+ network cable 3M, passive twinax cables offer a highly cost-effective way to connect within racks and across adjacent racks.

The StarTech C6ASPAT10BK 10' Cat6a black patch cable features RJ-45 male connectors on both the sides for enhanced connectivity. This snagless shielded patch cable with PVC jacket, is great for 10GBase-T Ethernet networks and protects data against electromagnetic interference. It supports speeds up to 500 MHz and is compatible with PoE enabled devices. This cable assures fast and dependable 10 Gigabit network connections..Category 6a for Network Device, Hub, Switch, Router, Print Server, Patch Panel.1.25 GB/s.Patch Cable.10 ft.1 Pack.1 x RJ.45 Male Network.Shielding.Black.Iogear® GearPower Dual USB car charger features two 4.2 A charging outputs that are configured to ensure fast charging with all devices and allows you to charge your mobile devices while travelling.

Here's a fast, easy way to access data on a 2.5" solid-state or hard drive. This cable-style adapter lets you connect your laptop or desktop computer directly to a solid-state drive and access it through ultra-fast USB 3.1 Gen. 2 (up to 10 Gbps). With the adapter cable, you can quickly swap hard drives without having to install your drives into an enclosure. You can copy or retrieve data from a 2.5" SSD/HDD quickly with no additional accessories required. It gives you easy drive access for data migration, drive cloning and data backup applications, with the fast performance of USB 3.1 Gen 2. USB 3.1 Gen 2 gives you greater bandwidth and speed with rates of up to 10 Gbps - twice the speed of USB 3.0 (USB 3.1 Gen 1) technology. It lets you leverage the high performance of the latest SSDs and hard drives, while alleviating bottlenecks in your data transfers. This cable-style adapter features a compact, lightweight design that tucks easily into a laptop bag or carrying case. Use it wherever you go to access valuable data quickly - with no external power required..QUICKLY ACCESS A SATA SSD OR HDD: This USB 3.1 to SATA cable delivers instant access to your 2.5" SATA drives from your laptop or computer; The adapter is compatible with SATA I, II and III (up to 6Gbps) NOTE: Supports 2.5" SATA drives only. For 3.5" drives please see our USB312SAT3.FAST TRANSFER SPEEDS & UASP SUPPORT: The SATA hard drive adapter cable lets users experience enhanced performance and super-fast data transfer speeds with support for USB 3.1 (10Gbps) and UASP.CONNECT FROM ANYWHERE: The external HDD / SSD storage converter delivers perfect portability, tucking away nicely in a laptop bag; The cable-style adapter is USB-powered so no external power cords are required.1 x SATA/Power.PLUG-AND-PLAY: Access any 2.5" hard drive or solid-state drive from any USB enabled computer by simply plugging in the SATA adapter cable; you can easily swap between drives with no need to install the drive inside an enclosure.Black.Connect a 2.5" SATA SSD/HDD to your computer using this USB 3.1 Gen 2 ultra-portable cable

Dell EMC DAC-SFP-10G-2M Compatible 2m 10G SFP+ to SFP+ Direct Attach Cable Twinax - 10GbE SFP+ Copper DAC 10 Gbps Low Power Passive Mini GBIC/Transceiver Module DAC (DACSFP10G2M).100% DELL EMC DAC-SFP-10G-2M COMPATIBLE DAC: 10G direct attach cable works with Dell EMC switches and is MSA compliant.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself, not the life of your switch; our modules won't void your OEM warranty and supported by our Tech Advisors 5/24.TECHNICAL SPECS: 2m (6.6ft) | 10 Gbps | Passive Twinax (Copper) | 2 x SFP+ Pluggable Connector | 100 Ohm Impedance | 30 AWG Wire Gauge | PVC Cable Jacket | Hot swappable | MSA Compliant.TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Dell EMC routers and switches.WORKS WITH MSA COMPLIANT SWITCHES: Low power 10GbE DAC also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules and transceivers.10 Gbps | Passive Copper Cable | 2 m (6.6ft) | Lifetime Warranty

Aruba delivers secure edge-to-cloud solutions that use AI and machine learning to make things simpler, faster, and more automated for IT, while harnessing data to drive powerful business outcomes. The world's largest companies rely on Aruba to provide a secure, AI-powered edge services platform that spans across campus, branch, data center, and remote working environments for a single operational experience..10Gbps SFP+ to SFP+ direct attach copper cable.Comes in orange and silver.Cable length: 3.3'

Black 6' data transfer cable has USB type C male connector on first end and USB type C male connector on second end and transfer rates up to 20Gbps..Black data transfer cabel charge and sync your devices.Cable Length: 6'.24 pin USB type C male to 24 pin USB type C male.Interface: USB.Terminal 1: USB Type C Male.Compatibility: Macbook Pro 15", Macbook Pro 13", Google Pixel.Data transfer rate: 20 Gbps

10ft Cat6 Snagless Unshielded Network Patch Cable - Gray.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Gray.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in gray color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.29 lbs..Comes with lifetime warranty

The Cisco™ SFP-10G-AOC7M= 10GBase-AOC SFP+ to SFP+ fiber optic direct attach cable in blue color, offers connection within racks and across adjacent racks. The 22.97' direct attach cable with copper media, supports network devices..Twinaxial direct attach cable is perfect for signaling applications.Cable length: 22.97'.Color: Blue.Connectors: One SFP+ on both the ends.Device supported: Network device.Ethernet technology: 10 Gigabit Ethernet.Transceiver type: AOC.Media: Copper.Meets GR-20-CORE, GR-326-CORE, GR-1435-CORE, ITU-T G.709, IEEE 802.3, ITU-T G.975, ITU-T G.975.1, RoHS certifications and standards

StarTech.com 0.5m 10G SFP+ to SFP+ Direct Attach Cable for Cisco SFP-H10GB-CU0-5M 10GbE SFP+ Copper DAC 10Gbps Passive Twinax.100% Cisco SFP-H10GB-CU0-5M compatible 10G direct attached cable.0.5m/1.6' Cable | 10 Gbps | Passive Twinax (Copper) | 2x SFP+ Pluggable Connector | 100 Ohm Impedance | 30 AWG | PVC Jacket.10GbE Low Power Mini GBIC/Transceiver Module DAC for edge networks/server rooms/data centers.For Cisco switches Firepower | ASR9000 | ASR1000 | C9300 | C3850 | NCS540 | C9500.Hot-Swappable and MSA Compliant.Copper SFP+ Cable | 10 Gbps | Passive DAC | Lifetime Warranty

10 ft. CAT6 Ethernet Cable - 10 Pack - ETL Verified - Gray CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG - UTP.CAT6 Ethernet cable multipack meets all ANSI/TIA-568-D Category 6 patch cable specifications.This Gray Ethernet cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability.CAT6 patch cord features 100% copper and foil-shielded twisted-pair wiring to prevent EMI interference.Snagless RJ45 boot design won't get caught in wiring conduits during installation.Built with 24 AWG copper wire and tested to keep Near-End Crosstalk within acceptable limits.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Gray | Lifetime Warranty

StarTech shielded Cat6a cables ensure fast and dependable 10 Gigabit network connections by protecting against electromagnetic interference (EMI/RFI) and noise. The result is a fast and safe network. Each cable is tested for up to 500 MHz frequency and is more than suitable for 10GBase-T Ethernet networks. Plus, the RJ45 connectors are both snagless and molded to prevent damage to the connector clips and the cable. This helps to avoid accidental disconnections and decreases in network performance..CAT-6a snagless shielded (STP) Ethernet network patch cable designed for error-free 10Gbps multi-gigabit connections.Cable length: 10'.Features an RJ45 (male) connector on each end.Constructed from high-quality 100% stranded copper and features a Low Smoke Zero Halogen (LSZH) jacket; comes in white.Snagless molded boots protect the tab/latch on each RJ45 connector.Tested for up to 500 MHz frequency and is more than suitable for 10GBase-T Ethernet networks.Meets the ANSI/TIA-568.2-D standards for patch cord performance.The 27 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.Braided construction resists damage from bending.Supports PoE devices up to 100W PoE++.Lifetime limited manufacturer warranty

The Tripp Lite U420-003-G2 3' data transfer cable in black, efficiently connects peripherals and computer, laptop, tablet, Smartphone or other compatible USB 3.1 device. It has one 24-pin USB 3.1 Type-C male connector on first end and one 24-pin USB 3.1 Type-C male connector on second end for ensuring enhanced connectivity. Featuring molded nickel-plated connectors and gold-plated contacts, this data cable has premium foil and braid shielding for EMI/RFI noise protection and error-free signal quality. It has integral strain relief with rugged PVC jacket for longer endurance and added comfort..Data transfer cable connects a computer, laptop, tablet, Smartphone or other device.Cable length: 3'.Connections: One 24-pin USB 3.1 Type-C male on first end, one 24-pin USB 3.1 Type-C male on second end.Safety specs: EMI/RF protection and strain relief.Compatibility: USB C laptops, Apple MacBook Chromebook Pixel Nexus 6P Nexus 5X.Color: Black.Material: PVC jacket, nickel and gold (connector plating), foil with braid (shielding).Data transfer rate: 1.25 GBps.Connects and charges devices with USB-C ports and data transfer speeds up to 10 Gbps and compatible with Thunderbolt 3 ports.Fumble-free reversible plugs ensure fast, easy connection every time and integral strain relief for long life with rugged PVC jacket.Foil and braid shielding for error-free signal quality and EMI/RFI protection, molded nickel-plated connectors and gold-plated contacts for safety.System requirements: Devices with a USB-C port.Temperature: -10 - 60 deg C (14 - 140 deg F) operating, -20 - 85 deg C (-4 - 185 deg F) storage, 10 - 85 % (relative humidity).RoHS compliant.Comes with lifetime limited warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Ensure a reliable Ethernet network connection between your system and router using the Tripp Lite N201-006-RD CAT-6 Cable. RJ-45 male connectors are fitted at both ends of this networking cable for efficient signal transfer between devices. Its high-quality copper conductor is sheathed in a PVC jacket for durability and optimal insulation of the wire. Besides protecting the connector clips, the snagless design makes the cable less prone to snapping during installation..Capable of transmitting data at 1000 Mbps.Gold-plated RJ-45 male connectors on both sides for dependable network connectivity.6' CAT-6 for easy tethering.Comes with a lifetime limited warranty.Comes with a lifetime limited warranty.The Tripp Lite N201-006-RD 6' CAT-6 Gigabit Snagless Molded Patch Cable, Red, supports 10 Gigabit Ethernet networks to facilitate optimum data transfer.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

The 4XEM 10 ft Cat6A Snagless RJ45 Ethernet Patch Cable provides reliable 10 Gigabit connectivity for professional, commercial, and educational environments. Built with 25 AWG pure copper stranded conductors, this cable delivers excellent electrical performance and lower signal loss than CCA-based alternatives. The snagless overmold strain‑relief boot protects the RJ45 latch during installation, while the FT1 UL‑rated PVC jacket offers long‑lasting durability and flexibility. Supporting 500 MHz bandwidth, this UTP cable ensures smooth data transmission, stable VoIP communication, and efficient high-speed networking. With a convenient 10 ft length, it is ideal for desktops, server racks, patch panels, and everyday equipment connections. Fully compliant with TIA/EIA‑568B.2 and RoHS, this Cat6A cable offers dependable performance and is backed by a lifetime warranty for lasting value..Ideal for networking in offices, labs, and business setups..Provides a 10 ft cable length for everyday device links..Uses RJ45 male connectors wired to the 568B standard..Built with 25 AWG pure copper and a blue PVC jacket..Delivers 500 MHz bandwidth for stable data flow..Features RJ45 terminals for reliable Ethernet access..Supports 10 Gbps speeds for high‑performance networks..Works with switches, routers, and patch panel systems..Complies with RoHS and TIA/EIA‑568B.2 standards..Lifetime warranty for lasting dependability.

Connect high-speed network devices - like modems, PCs, laptops, smart TVs, gaming consoles and more - with this Staples TECH Ethernet cable. The 10-foot cable is compact to reduce cord clutter, while the CAT 7 configuration offers data transfer speeds up to 10Gbps for fast performance. This Staples TECH CAT 7 Ethernet cable has snag-free RJ45 connectors for an efficient and stable signal between compatible devices. Backed by Staples Brands 100% satisfaction guarantee, or your money back..Cat-7 Ethernet cable delivers consistent internet connection at speeds up to 10 Gbps between your computer and networking devices.10' cable length.Features RJ45 plugs on both ends.Comes in black.Backed by Staples Brands 100% Satisfaction Money Back Guarantee.Enable high-speed internet connection with the Staples TECH CAT 7 Ethernet cable.

Connect USB 3.1 or 3.0 USB-B devices to your USB-C host. Need to connect a new USB-C™ device to a USB-B device? This 1m USB-C to USB-B cable is the perfect solution. It's also compatible with Thunderbolt™ 3 ports. Connect newer USB 3.1 peripherals With a bandwidth of 10 Gbps, this USB 3.1 Gen 2 cable lets you connect your USB-B devices such as hard drive enclosures and docks to your laptop, at speeds like never before..USB 3.1 data transfer rates up to 10Gbps when used with USB 3.1 host and device.Simple connections through a reversible USB Type-C™ connector, which plugs into your device with either side facing up.Thunderbolt 3 port compatible.Certifications & Standards: RoHS

10 ft. CAT6 Ethernet cable - 10 Pack - ETL Verified - Blue CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG Copper Wire - UTP Ethernet Cable (N6PATCH10BL10PK).100% COPPER WIRING: Each CAT6 Ethernet cable is built with 100% copper wiring to prevent weak power delivery and equipment damage, compared to copper-clad aluminum wire cables.CABLE PERFORMANCE: Length: 10 ft. (3 m) Color: Blue | Cable Structure: 4 Pair UTP | Connector Type: Snagless | Jacket Material: PVC | Wire Gauge: 24 AWG | Wiring Standard: ANSI/T568B.CAT6 PATCH CABLE MULTIPACK: This 10 pack of 10 ft. Blue patch cords is a convenient and affordable option for businesses in need of multiple snagless ethernet cables.EASY INSTALLATION: Blue snagless Ethernet cords won’t get caught in wiring conduits during installation; Compatible w/Cat5e & earlier standards; Molded boots available for constrained spaces.ETL VERIFIED: This CAT6 cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability. Each CAT6 patch cord is tested to comply with ANSI/TIA-568-D Category 6 requirements.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Blue | Lifetime Warranty

The Cisco™ SFP-10G-AOC3M= 10GBASE-AOC SFP+ 3m fiber optic network cable comes with the SFP+ network copper connectors. It offers the data transfer rate up to 10.5 Gb/s and is hot swappable. This cable operates at a temperature range of 0 to 70 deg C..Network cable is well suited for very short distances.Dimensions: 3 m L.Comes in orange color and features copper conductor for better electrical conductivity.Interface: One SFP+ network first end, one SFP+ network second end.Has fiber optic cable for reliable data transfer.Compatible with networking device.Operating temperature: 32 - 158 deg F.Meets RoHS, Green, GR-20-CORE, GR-326-CORE, GR-1435-CORE, ITU-T G.709, IEEE 802.3, ITU-T G.975, ITU-T G.975.1 certification and standards.Comes with 90 days warranty

The C2G® 6' DisplayPort cable is perfect for high definition A/V connectivity from source to display. It has a 20-pin DisplayPort male connector on the first end and 20-pin DisplayPort female connector on the second end. Enjoy the best digital picture and video quality on your monitor or television by connecting it to your computer with a DisplayPort cable. This 28 AWG copper wire cable comes fully shielded to protect unwanted interference and delivers sharp, crystal-clear picture and sound. This cable support high bit rate with a bandwidth of 10.8 Gb/s and also resolutions up to 4k for superior video quality..DisplayPort for Audio/Video Device.6.50 ft.1 x DisplayPort Male Digital Audio/Video.Shielding.Black.Features 28 AWG copper conductor for enhanced conductivity.Supports audio/video device.Data transfer rate: 10.8 Gbps.Support resolutions up to 4k, 4096 x 2160.Weight: 0.35 lbs..Comes with lifetime warranty.The 6' white StarTech PXT101NB6W Laptop Power Cord with a rating of 125 V is suitable for charging notebooks.

The C2G 27153 10' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..RJ-45 Male.10ft.Black.Features black polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.25 lbs..Comes with lifetime warranty.6 outlets surge protector features 15 A, 120 V, 1800 W, 2 position on/off switch/15 A AC circuit breaker.

15 ft. CAT6 Ethernet cable - 10 Pack - ETL Verified - Blue CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG Copper Wire - UTP Ethernet Cable (N6PATCH15BL10PK).100% COPPER WIRING: Each CAT6 Ethernet cable is built with 100% copper wiring to prevent weak power delivery and equipment damage, compared to copper-clad aluminum wire cables.CABLE PERFORMANCE: Length: 15 ft. (4.6 m) Color: Blue | Cable Structure: 4 Pair UTP | Connector Type: Snagless | Jacket Material: PVC | Wire Gauge: 24 AWG | Wiring Standard: ANSI/T568B.CAT6 PATCH CABLE MULTIPACK: This 10 pack of 15 ft. Blue patch cords is a convenient and affordable option for businesses in need of multiple snagless ethernet cables.EASY INSTALLATION: Blue snagless Ethernet cords won’t get caught in wiring conduits during installation; Compatible w/Cat5e & earlier standards; Molded boots available for constrained spaces.ETL VERIFIED: This CAT6 cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability. Each CAT6 patch cord is tested to comply with ANSI/TIA-568-D Category 6 requirements.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Blue | Lifetime Warranty

The Cisco™ SFP-10G-AOC1M= SFP+ 3.28' fiber optic network cable features one SFF-8431 SFP+ network connector on both ends. Cable in beige, is perfect for applications requiring high bandwidth. It withstands temperature range of 23 to 158 deg F..Network cable for home or office applications.Dimensions: 3.28' cable.Color: Beige.Interface/ports: One SFF-8431 SFP+ network connector on both ends.Cable type: Fiber optic.Temperature: 23 - 158 deg F operating.Meets RoHS, MSA, UL E116441 and ELV certifications and standards

7 ft. CAT6 Ethernet cable - 10 Pack - ETL Verified - Blue CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG Copper Wire - UTP Ethernet Cable (N6PATCH7BL10PK).100% COPPER WIRING: Each CAT6 Ethernet cable is built with 100% copper wiring to prevent weak power delivery and equipment damage, compared to copper-clad aluminum wire cables.CABLE PERFORMANCE: Length: 7 ft. (2 m) Color: Blue | Cable Structure: 4 Pair UTP | Connector Type: Snagless | Jacket Material: PVC | Wire Gauge: 24 AWG | Wiring Standard: ANSI/T568B.CAT6 PATCH CABLE MULTIPACK: This 10 pack of 7 ft. Blue patch cords is a convenient and affordable option for businesses in need of multiple snagless ethernet cables.EASY INSTALLATION: Blue snagless Ethernet cords won’t get caught in wiring conduits during installation; Compatible w/Cat5e & earlier standards; Molded boots available for constrained spaces.ETL VERIFIED: This CAT6 cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability. Each CAT6 patch cord is tested to comply with ANSI/TIA-568-D Category 6 requirements.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Blue | Lifetime Warranty

5 ft. CAT6 Ethernet cable - 10 Pack - ETL Verified - Blue CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG Copper Wire - UTP Ethernet Cable (N6PATCH5BL10PK).100% COPPER WIRING: Each CAT6 Ethernet cable is built with 100% copper wiring to prevent weak power delivery and equipment damage, compared to copper-clad aluminum wire cables.CABLE PERFORMANCE: Length: 5 ft. (1.5 m) Color: Blue | Cable Structure: 4 Pair UTP | Connector Type: Snagless | Jacket Material: PVC | Wire Gauge: 24 AWG | Wiring Standard: ANSI/T568B.CAT6 PATCH CABLE MULTIPACK: This 10 pack of 5 ft. Blue patch cords is a convenient and affordable option for businesses in need of multiple snagless ethernet cables.EASY INSTALLATION: Blue snagless Ethernet cords won’t get caught in wiring conduits during installation; Compatible w/Cat5e & earlier standards; Molded boots available for constrained spaces.ETL VERIFIED: This CAT6 cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability. Each CAT6 patch cord is tested to comply with ANSI/TIA-568-D Category 6 requirements.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Blue | Lifetime Warranty

25 ft. CAT6 Ethernet cable - 10 Pack - ETL Verified - Blue CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG Copper Wire - UTP Ethernet Cable (N6PATCH25BL10PK).100% COPPER WIRING: Each CAT6 Ethernet cable is built with 100% copper wiring to prevent weak power delivery and equipment damage, compared to copper-clad aluminum wire cables.CABLE PERFORMANCE: Length: 25 ft. (7.6 m) Color: Blue | Cable Structure: 4 Pair UTP | Connector Type: Snagless | Jacket Material: PVC | Wire Gauge: 24 AWG | Wiring Standard: ANSI/T568B.CAT6 PATCH CABLE MULTIPACK: This 10 pack of 25 ft. Blue patch cords is a convenient and affordable option for businesses in need of multiple snagless ethernet cables.EASY INSTALLATION: Blue snagless Ethernet cords won’t get caught in wiring conduits during installation; Compatible w/Cat5e & earlier standards; Molded boots available for constrained spaces.ETL VERIFIED: This CAT6 cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability. Each CAT6 patch cord is tested to comply with ANSI/TIA-568-D Category 6 requirements.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Blue | Lifetime Warranty

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 10'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

6 ft. CAT6 Ethernet cable - 10 Pack - ETL Verified - Blue CAT6 Patch Cord - Snagless RJ45 Connectors - 24 AWG Copper Wire - UTP Ethernet Cable (N6PATCH6BL10PK).100% COPPER WIRING: Each CAT6 Ethernet cable is built with 100% copper wiring to prevent weak power delivery and equipment damage, compared to copper-clad aluminum wire cables.CABLE PERFORMANCE: Length: 6 ft. (1.8 m) Color: Blue | Cable Structure: 4 Pair UTP | Connector Type: Snagless | Jacket Material: PVC | Wire Gauge: 24 AWG | Wiring Standard: ANSI/T568B.CAT6 PATCH CABLE MULTIPACK: This 10 pack of 6 ft. Blue patch cords is a convenient and affordable option for businesses in need of multiple snagless ethernet cables.EASY INSTALLATION: Blue snagless Ethernet cords won’t get caught in wiring conduits during installation; Compatible w/Cat5e & earlier standards; Molded boots available for constrained spaces.ETL VERIFIED: This CAT6 cable 10 pack is ETL Verified to ensure an elevated level of quality and reliability. Each CAT6 patch cord is tested to comply with ANSI/TIA-568-D Category 6 requirements.Bulk CAT6 Patch Cables | Snagless | 100% Copper Wire | Blue | Lifetime Warranty

Achieve Unmatched Network Performance with StarTech 100ft Cat6a Ethernet Cable Elevate your network connectivity with the StarTech 100ft Cat6a Ethernet Cable. Engineered for high-performance and durability, this cable ensures fast, reliable, and secure connections for all your networking needs. Designed to support Multi-Gigabit/Multi-speed connections, this Cat6a cable offers robust protection against electromagnetic interference (EMI/RFI) and noise, ensuring minimal signal loss and consistent performance. The 27AWG pure bare copper wire construction enhances conductivity and reduces resistance, providing reliable data transmission. The snagless connectors with 50-micro gold-plated contacts ensure a precise fit, minimizing wear and maintaining signal integrity. The flexible Low Smoke Zero Halogen (LSZH) jacket is flame-retardant, emitting low smoke and toxic fumes, making it ideal for installations in poorly-ventilated areas, industrial settings, and residential environments. This versatile Cat6a patch cord is perfect for 10GBASE-T networks and supports up to 100W output for Power over Ethernet (PoE++) devices. It is backward compatible with Cat 6 and Cat 5/5e standards, ensuring seamless integration into existing network setups..This Cat6a Ethernet cable is designed for networking use, providing reliable connectivity for high-speed data transmission in both professional and home environments..The cable measures 100 feet in length, offering extensive reach for various networking setups..The cable features RJ-45 connectors on both ends, each with 8 pins, ensuring compatibility with standard Ethernet ports..Constructed with 27AWG pure bare copper wire and a Low Smoke Zero Halogen (LSZH) jacket, the cable is durable and safe for various installations. The true color of the cable is gray..Terminal type 1: RJ-45 male connector on one end. Terminal type 1: RJ-45 male connector on the other end..Supports data transfer rates up to 10Gbps, making it ideal for 10GBASE-T networks and backward compatible with Cat 6 and Cat 5/5e standards..Compatible with 10G switches, Network Attached Storage (NAS), SFP modules, and PoE++ devices. For a full list of compatible devices, refer to the extended description..The cable is Fluke Tested and ETL Verified for guaranteed Cat6a performance. It complies with RoHS, REACH, and CE standards for safety and environmental protection..The cable comes with a lifetime warranty, ensuring long-term reliability and performance.

10ft Cat6 Snagless Unshielded (UTP) Network Patch Cable - Red.Category 6 for Network Device.RJ-45 Male.RJ-45 Male.10ft.Red

Connect USB 10Gbps source and peripheral devices using this StarTech 9.8' active USB Type-C cable. This cable is perfect for setups requiring full-featured USB-C and DP support, such as large UHD displays/video walls, and boardroom/conference room cameras..Experience full-featured USB-C and 8K video at distances using this active USB-C cable.Cable length is 9.8'.Contains two USB 3.2 Gen 2 USB Type-C (Power Delivery and data, 24 pin, 10 Gbps) ports.Flexible PVC outer jacket improves durability and protects from wear, aluminum-mylar shield with metal connector housing for enhanced EMI protection, while nickel-plated connectors rated beyond 10000 insertion cycles.Supports up to 8K 60Hz video over DisplayPort 1.4 Alt Mode with HBR3, HDR10, MST, DSC 1.2, and HDCP 2.2; backward compatible with DP 1.3/1.2 resolutions, including 4K 60Hz, 1440p, and 1080p.Compatible with USB-C laptops, mobile devices, and iPhone 15/15 Pro.An integrated active chipset facilitates bi-directional connectivity for convenient setup, and supports up to 10Gbps throughput without additional power or signal boosters.Enables universal compatibility with USB 3.2, USB 3.0, and USB-C devices.Perfect for USB-C monitors and devices, boardroom cameras, and connectivity in large workspaces.2-year manufacturer limited warranty

The Select High Speed HDMI Cable with Ethernet is the perfect solution for connecting multimedia source devices in home theater, desktop or commercial audio video applications requiring high speed HDMI features. The CL2 rated cable jacket is designed to meet the requirements for in-wall installations. The Ethernet capabilities of the cable allow a user to connect multiple Ethernet enabled HDMI devices through a single Ethernet connection. This cable can be utilized with network switch stacking..This A/V Cable provides splendid performance and clear connectivity.With HDMI, transfer high-quality pictures and 3D sound effects simultaneously at a high-speed.Device Supported: Home Theater System, Audio/Video Device.Certifications & Standards: UL

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Connect high-speed network devices - like modems, PCs, laptops, smart TVs, gaming consoles and more - with this Staples TECH Ethernet cable. The 20-foot cable provides ample length to connect from across the room, while the CAT 7 configuration offers data transfer speeds up to 10Gbps for fast performance. This Staples TECH CAT 7 Ethernet cable has snag-free RJ45 connectors for an efficient and stable signal between compatible devices. Backed by Staples Brands 100% satisfaction guarantee, or your money back..Cat-7 Ethernet cable delivers consistent internet connection at speeds up to 10 Gbps between your computer and networking devices.20' cable length.Features RJ45 plugs on both ends.Comes in black.Backed by Staples Brands 100% Satisfaction Money Back Guarantee.Enable high-speed internet connection with the Staples TECH CAT 7 Ethernet cable.

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

The Dell™ 470-AAVJ direct attach twinaxial networking cable of 9.84' long, provides 10 GbE SFP+ connectivity. This cable is perfect for use with your Dell N4000 series, N-series, PowerConnect 6224, 6224F and 6224P..Direct attach twin axial network cable is perfect for network device.Cable length: 9.84'.Copper conductor.Compatible with DELL NETWORKING N4000 series N4032, N4032F, N4064F, DELL NETWORKING N-Series N2024P, N3024, N3024P, N3048, PowerConnect 6224, 6224F.Connector on first end: 1 x SFP+ male.Connector on second end: 1 x SFP+ male.Technology: Twin axial

Establish your high-performance network connections with this CAT-6 Network Patch Cable from Intellinet Network Solutions. It supports up to 10-Gbps data transmissions with frequencies up to 250 MHz and all PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE. This stranded cable offers all the benefits of a standard CAT-6 network cable, but with a diameter that's considerably smaller. In dense cable installations, the cable creates a tidier and more-organized look, and its thinner size helps promote better air circulation to equipment in a network cabinet. As opposed to other cables that are manufactured with copper-clad aluminum (CCA) or even copper-clad steel (CCS), this cable contains 100% pure bare copper, making it ideal for use in PoE applications. Gold plating on the contacts makes them corrosion-resistant in every environment. The cable plugs are equipped with an extra-long boot that is extremely flexible and bendable for the best strain relief in cable runs around corners and in tight spaces. This is a pack of 10..10 pack.CAT-6 cable with 10 Gbps/1 Gbps and 250 MHz in accordance with ISO/IEC 11801 and EN 50288.Pure bare copper wire for maximum conductivity.Gold-plated contacts for corrosion-free connections.Ultra-thin format for more flexibility and simplified cable management in dense installations.Flexible connector covers to protect RJ45 plugs and allow the thin cable to be easily bent to the desired angle.Ideal for HDBaseT and PoE applications up to IEEE802.3bt/PoE++/4PPoE/Ultra PoE.Heavy-duty strain relief.Compatible and color-coded with T568A and T568B (sold separately).Standard 8P8C design, compatible with all network RJ45 connections.Fully backward compatible with previous cable categories, including CAT-5e and 5.Lifetime warranty

Duplex patch cable..Aqua.Fiber optic LC male/LC male.Backward compatible with legacy LAN's.10'.Device supported: Network device.Applications: For use with 40/100 gigabit ethernet equipment.Jacket type: LSZH.Core/cladding diameter: 50/125 microm.Fiber optic mode: Laser-optimized multimode fiber (LOMMF).Network speed: 10 Gbps / 40 Gbps / 100 Gbps.40/100Gb ethernet speed to 300 meters at 850 nm.Includes 10' duplex multimode 50/125 aqua OM4 fiber patch cable, LC/LC.Compliant and standards: OM4 rated, TIA LOMMF and RoHS compliant.Warranty: Lifetime limited

FASTER THAN EVER Thunderbolt, famed for superfast speeds, high definition capability, and huge power output, has had an upgrade. Transferring data between Thunderbolt 3 devices at up to a staggering 40 Gbps, this cable is ideal for large volume data and Ultra HD displays. It also supports power delivery up to 100 Watts, and can daisy chain up to six Thunderbolt 3 devices. Get the most from all your Thunderbolt 3 peripherals with the ultimate smart, high-speed cable. Made for: USB-C /Thunderbolt 3 devices, 5K/Ultra HD FASTER DATA TRANSFER Between Thunderbolt 3 devices, the 0.5m Thunderbolt 3 Cable can support data transfer up to a staggering 40 Gbps. Backwards compatible, it delivers speeds up to 10 Gbps for USB3.1 devices, up to 5 Gbps for USB3.0 and 480Mbps for USB2.0. SUPPORTS ULTIMATE HIGH DEFINITION DISPLAYS High volume data capability makes the Thunderbolt 3 Cable 40 Gbps ideal for high definition video. Supporting Thunderbolt, 5K and Ultra HD displays, sharing content between screens is easy, without compromising quality. STAY CHARGED The Thunderbolt 3 Cable can also supply up to 100W of power delivery for Thunderbolt 3 and USB-C devices that require it, without the need for an additional power supply. GREAT LENGTHS The 1.6 foot Thunderbolt 3 cable is a compact solution ideal for connecting Thunderbolt peripherals such as docks and hard drives, and fits seamlessly to any desk environment. THUNDERBOLT 3 COMPATIBLE In addition to the rigorous quality testing that all Belkin cables must go through, this cable has also been tested to abide by the Thunderbolt standards provided by Intel. Tested for durability and sustained functionality, the result is a fully Thunderbolt 3-compatible cable with the quality you expect from Belkin. FASTER, STRONGER, SMARTER Thunderbolt technology is changing the face of USB. For more information on the benefits of Thunderbolt, from high speed data transfer, the application for HD and 4K video, power delivery to your connected devices and much more, at our dedicated Thunderbolt page. It contains everything you need to know about this exciting technology and how to integrate it seamlessly into your life. on Thunderbolt Technology. At A Glance: Thunderbolt 3 male to Thunderbolt 3 male. Transfer data up to 40 Gbps. Up to 100W of power delivery. Supports Thunderbolt/Ultra HD Displays. Thunderbolt compatible. 1.6-foot / 0.5-meter length. Package Includes: USB-C Thunderbolt 3 Cable. FCC/CE Inserts ..Thunderbolt 3 male to Thunderbolt 3 male.Transfer data up to 40 Gbps.Up to 100W of power delivery.Supports Thunderbolt/Ultra HD Displays.Thunderbolt compatible.1.6-foot/0.5-meter length