Fire-Resistant Fiber Optic Cables

Connect fiber network devices for high-speed transfers with LSZH rated cable. The SMFIBLCSC1 1m LC to SC Single-Mode Duplex Fiber Cable features 9/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet and Fiber Channel networks, with support for duplex single-mode applications. This LC-SC patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire - an ideal solution for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration. Each Duplex 9/125 (OS1) Single-Mode Fiber Patch Cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability, and is backed by our lifetime warranty..Guaranteed reliability.Suitable for installations under restrictive building codes, with LSZH rating.Cable Length: 3.28 ft

Compared to conventional twisted-pair copper cable, this LC-LC OM4 AddOn® 9.84' aqua fiber optic patch cable offers higher speeds and increased bandwidth. Multi-mode, LC/LC OM4 cable is suitable for use with 10GB Ethernet applications. The low smoke zero halogen jackets protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It is specifically designed for Ethernet, multimedia or communication applications. The patch cable provides backward compatibility with existing 50/125 um equipment..Laser optimized multi-mode fiber patch cable is specifically designed for Ethernet, multimedia, or communication applications.9.84' long for easy installation.Two LC male x two LC male connector provides the necessary connection between fiber networking devices.Designed for use with 10GB applications.Low smoke zero halogen jacket provides protection against toxic and corrosive gases in badly ventilated spaces and other most crucial areas.Meets RoHS, Green compliance and OM4 certified.Patch cable with fiber core/cladding diameter of 50/125 um has UPC termination to ensure secure connection.Laser optimized multimode fiber is built for speed and supports network device.Comes in aqua color.Duplex fiber optic cable offers simultaneous, bidirectional data transfer.Well suited for LANs or SANs and used for connection between fiber patch panels, hubs, switches, media converters and routers, etc.Provides fire protection needed to run within walls and air plenums eliminating the need for conduits.Offers higher speeds and increased bandwidth compared to conventional twisted pair copper cable.Comes with lifetime warranty.The AddOn® LC-LC OM4 9.84' aqua fiber optic patch cable offers fire protection needed to run within walls and air plenums terminating the need for conduits.

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 65.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 26.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 6.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 16.4'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 49.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 19.7'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

AddOn 15m LOMM OM4 fiber optic male LC/LC duplex patch cable in aqua color features low-smoke zero-halogen jacket that protects from toxic and corrosive gases. Cable is recommended for connection between fiber patch panels, hubs and switches..LC Male.Suited for shorter reach data center LAN's or SAN's, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc.15m.40Gb Ethernet, multimedia, or communication applications, and provides extended bandwidth over OM3 cable.Connector on first end: 2 x LC male network.Connector on second end: 2 x LC male network.Fiber optic: Fiber optic, cable characteristic: Patch cable, fiber optic mode: Multi-mode, core/cladding diameter: 50/125 micro meter, device supported: Network device.Aqua.Device supported: Network device.High-quality LOMM (50/125) patch cable is specifically designed for 40Gb Ethernet, multimedia, or communication applications, and provides extended bandwidth over OM3 cable.High bandwidth provided by OM4 fiber provides extra headroom for channel insertion loss.100% RoHS compliant for all of your networking needs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.It is designed to enhance the system cost benefits enabled by 850 nm Vertical Cavity Surface Emitting Lasers for existing 1 and 10 Gb/s applications, as well as future 40 and 100 Gb/s systems. when used at less than rated distance environments.Warranty: Lifetime limited.AddOn 15m LOMM OM4 fiber optic male LC/LC duplex patch cable in aqua color offers backward compatibility with existing 50/125 equipment and provides the fire protection needed to run within walls.

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 32.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 9.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

AddOn 6.5' Optic patch cable comes with low smoke zero halogen jacket and supports network devices. Cable with 2 x LC male connectors on both sides provides higher speeds with increased bandwidth and is ideal for LAN or SAN connectivity..2 x LC male/2 x LC male.Molded.Cable Length: 6.5'.Jacket material: Low smoke zero halogen.Cable type: Fiber optic.Yellow.Device supported: Network device.Core/Cladding diameter: 9/125 micrometer.Fiber optic mode: Single-mode.Fiber Qty: 2.Specifically designed for ethernet, multimedia, or communication applications is intended for use with 10Gb applications.Suited for LAN's or SAN's is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Low-smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduit.Injection molding process provides each connection greater durability in resisting pulls, strains, and impacts from cabling installs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.100% optically tested for insertion loss.Warranty: 3 years limited.AddOn 6.5' Optic patch cable in yellow color adds perfect choice for ethernet, multimedia or communication and 10GB applications and offers fire protection.