Ludwig T-Square Drafting Supplies
3 results
Ludwig Precision T-Squares feature hard tempered aluminum blades securely riveted to a super rugged black plastic t-head. These t-heads possess high impact strength. Standard T-Squares are made from extruded aluminum and are calibrated to 32nds through the first 6" on the top edge, cm and mm calibrations along the bottom edge. The 12" plastic head is attached with 4 rivets and calibrated out to 4" on each side of the blade. Heavy Duty T-Squares are made from extruded aluminum and are calibrated to 32nds through the first 6" along the top edge, cm and mm calibrations along the bottom edge. The extra-wide 14" head is attached with 5 rivets and calibrated to 5" on each side of the blade..Hard tempered aluminum blades securely riveted to black plastic t-head.Heavy Duty T-Squares made from extruded aluminum and calibrated to 32nds through the first 6"" along the top edge, cm and mm calibrations along the bottom edge.Extra-wide 14"" head is attached with 5 rivets and calibrated to 5"" on each side of the blade.size: 1 1/2 in. x 36 in..description: standard
Ludwig Precision T-Squares feature hard tempered aluminum blades securely riveted to a super rugged black plastic t-head. These t-heads possess high impact strength. Standard T-Squares are made from extruded aluminum and are calibrated to 32nds through the first 6" on the top edge, cm and mm calibrations along the bottom edge. The 12" plastic head is attached with 4 rivets and calibrated out to 4" on each side of the blade. Heavy Duty T-Squares are made from extruded aluminum and are calibrated to 32n ds through the first 6" along the top edge, cm and mm calibrations along the bottom edge. The extra-wide 14" head is attached with 5 rivets and calibrated to 5" on each side of the blade..Heavy Duty T-Squares made from extruded aluminum and calibrated to 32nds through the first 6"" along the top edge, cm and mm calibrations along the bottom edge.Hard tempered aluminum blades securely riveted to black plastic t-head.Superior rugged materials and design for high impact strength.Extra-wide 14"" head is attached with 5 rivets and calibrated to 5"" on each side of the blade.description: standard.size: 1 1/2 in. x 12 in.
Ludwig Precision T-squares feature hard tempered aluminum blades securely riveted to a super rugged black plastic T-head. These T-heads possess high impact strength. Standard T-squares are made from extruded aluminum and are calibrated to 32nds through the first 6" on the top edge, cm and mm calibrations along the bottom edge. The 12" plastic head is attached with 4 rivets and calibrated out to 4" on each side of the blade. Heavy duty T-squares are made from extruded aluminum and are calibrated to 32nds through the first 6" along the top edge, cm and mm calibrations along the bottom edge. The extra-wide 14" head is attached with 5 rivets and calibrated to 5" on each side of the blade..Hard tempered aluminum blades securely riveted to black plastic T-head.Heavy duty T-Squares made from extruded aluminum and calibrated to 32nds through the first 6" along the top edge, cm and mm calibrations along the bottom edge.Extra-wide 14" head is attached with 5 rivets and calibrated to 5" on each side of the blade.Size: 1-1/2" x 18".Description: standard
You May Also Like
Straight edge and rule combined to give you an edge always ready to use. Large, easy to read numbers and calibrations. Lightweight and non-rusting. Calibrated to 32nds through the first 6" on every item. Edge-to-edge calibrations for easy length-of-item measurements. English and Metric calibrations on each ruler.These straight edges are 1.75" wide, 1.6 mm thick..Large, easy to read numbers and calibrations.Lightweight and non-rusting.Calibrated to 32nds through the first 6"" on every item.Edge-to-edge calibrations for easy length-of-item measurements.English and Metric calibrations on each ruler.These straight edges are 1.75"" wide, 1.6 mm thick.length: 30 in.
Straight edge and rule combined to give you an edge always ready to use. Large, easy to read numbers and calibrations. Lightweight and non-rusting. Calibrated to 32nds through the first 6" on every item. Edge-to-edge calibrations for easy length-of-item measurements. English and Metric calibrations on each ruler.These straight edges are 1.75" wide, 1.6 mm thick..Large, easy to read numbers and calibrations.Lightweight and non-rusting.Calibrated to 32nds through the first 6"" on every item.Edge-to-edge calibrations for easy length-of-item measurements.English and Metric calibrations on each ruler.These straight edges are 1.75"" wide, 1.6 mm thick.length: 30 in.
Straight edge and rule combined to give you an edge always ready to use. Large, easy to read numbers and calibrations. Lightweight and non-rusting. Calibrated to 32nds through the first 6" on every item. Edge-to-edge calibrations for easy length-of-item measurements. English and Metric calibrations on each ruler.These straight edges are 1.75" wide, 1.6 mm thick..Large, easy to read numbers and calibrations.Lightweight and non-rusting.Calibrated to 32nds through the first 6"" on every item.Edge-to-edge calibrations for easy length-of-item measurements.English and Metric calibrations on each ruler.These straight edges are 1.75"" wide, 1.6 mm thick.length: 36 in.
Blade calibrated on two edges, in 8ths and 16ths.9" head calibrated in 8ths.12" x 1 1/2"
Blade calibrated on two edges, in 8ths and 16ths.9" head calibrated in 8ths.24" x 1 1/2"
The AlumiCrafter is a scrapbooker-s dream come true! A great all in one tool, it can be used to measure, cut, and tear. Additionally, the AlumiCrafter-s unique deckle edge with center-finding calibrations makes a beautiful natural-looking border.The AlumiCrafter has a cutting edge, a raised edge, a finger groove for protecting your fingers while cutting, and a neoprene non-slip backing that keeps it in place during use. It also features an attractive and permanent silver color finish..Measure, cut, and tear.Unique deckle edge with center-finding calibrations.length: 12 in.
StanleyĀ® Combination square includes precision-machined working surfaces for more accuracy and has easy-to-read vial. Square contains 5 1/2" x 12" x 3/4" thick rust resistant, durably etched blades and the scriber comes in handy for surface marking..Blade length: 12-inch.Blade thickness: 3/4-inch.Blade width: 5 1/2-inch.Blade finish: Chrome.Head material: Die-Cast Metal.Durably etched, hard-chrome-plated blades are rust resistant and made to last.12-inch square has precision-machined working surfaces for improved accuracy.Built-in scriber comes in handy for surface marking.Easy-to-read vial.High-visibility yellow, die-cast handle with brass hardware for durability.StanleyĀ® Combination square featuring 5 1/2" x 12" x 3/4" thick chrome plated blade includes high-visibility yellow, die-cast head and handle with brass hardware for enhanced durability.
Alumicolor's solid drafting scales are the ultimate for accurate, professional use. Satin-smooth anodized aluminum scales are a pleasure to use. Alumicolor's hollow scales are light-weight but truly professional with the full six scales on each one and ultra smooth, mark resistant surface. The Architect scales have the following calibrations: (3/32, 3/16) (16) (1/8, 1/4) (1/2, 1) (3/4, 3/8) (3, 1 1/2).All scales measure 12 in. in length..Satin-smooth anodized aluminum scales are a pleasure to use.Alumicolor's hollow scales are light-weight but truly professional with the full six scales on each one and ultra smooth, mark resistant surface.Architect scales have the following calibrations: (3/32, 3/16) (16) (1/8, 1/4) (1/2, 1) (3/4, 3/8) (3, 1 1/2). All scales measure 12 in. in length.description: hollow architect scale.color: blue
Produce professional-quality engineering and architectural drafts with this gray-and-silver T-square. The metric and imperial rulings offer accurate measurements and quick conversion, while the aluminum construction provides good heft and lasting durability. Use the elevated sides on the ruler to control and guide your pencil in drawing quick and straight lines. This Staedtler Mars 24-inch T-square features a calibrated blade for longevity and wear-free black etched gradation markings for easy reading..Aluminum T-square with a ruler and calibrated blade.Features metric (61cm) and imperial (24") scale ruler markings on the straight-edge blade.Dimensions: 27.75"H x 11.63"W x 0.5"D.Offers a true professional ruler scale for drafting, engineering, crafting, artwork, and architectural work.High-contrast black gradation markings are etched into the ruler body for easy reading and long-lasting life.Draw straight and true with elevated sides to brace and guide your pencil or pen.Lifetime manufacturer limited warranty.Draw precise lines with this Staedtler Mars 24-inch T-square.
Alumicolor's solid drafting scales are the ultimate for accurate, professional use. Satin-smooth anodized aluminum scales are a pleasure to use. Alumicolor's hollow scales are light-weight but truly professional with the full six scales on each one and ultra smooth, mark resistant surface. The Architect scales have the following calibrations: (3/32, 3/16) (16) (1/8, 1/4) (1/2, 1) (3/4, 3/8) (3, 1 1/2).All scales measure 12 in. in length..Satin-smooth anodized aluminum scales are a pleasure to use.Alumicolor's hollow scales are light-weight but truly professional with the full six scales on each one and ultra smooth, mark resistant surface.Architect scales have the following calibrations: (3/32, 3/16) (16) (1/8, 1/4) (1/2, 1) (3/4, 3/8) (3, 1 1/2). All scales measure 12 in. in length.description: hollow architect scale.color: red
Draw more accurate plans with this triangular scale ruler. Featuring a durable three-sided design, this ruler provides six different easy-to-read scales for making a variety of measurements. A rugged aluminum construction helps this Staedtler triangular scale ruler stand up to wear and tear..Triangular scale ruler is perfect for professional engineers and students.Engineer scale is fully divided: 10, 20, 30, 40, 50, 60 parts to the inch.Dimensions: 12"L.Made of solid weather-resistant aluminum.Color-coded grooves for quick and accurate selection of the desired scale.Versatile, three-sided design with six different scales.Make precise measurements with this Staedtler triangular scale ruler.
Alumicolor's Calibrated Triangles are made of tempered aluminum. Photo anodized calibrations are part of the finish and resist cleaning or rubbing off. Ultra smooth finish won't mark your work surface.Available in 45/90 or 30/60/90 angles. Calibrations are in inches and centimeters. Various circle holes are also cut in the triangle center and feature calibrations..Photo anodized calibrations resist rubbing off.Ultra smooth finish.Won't mark your work surface.Calibrations are in inches and centimeters.Various circle holes are cut in the triangle center with calibrations.size: 10 in..description: 45/90
WestcottĀ® Stainless steel office ruler with etched-on standard and metric rule offers precise measurement. Ruler with a non slip cork base is 12" long and is flexible enough to scale hard-to-measure items..Nonskid cork backing protects surfaces.Bends for hard-to-measure items.Permanent acid-etched gradations.Sixteenths/metric measurements.WestcottĀ® Stainless steel office ruler measures 12" and comes with a non slip cork base to protect surfaces.
Alumicolor Select-a-Scales are an ultra convenient and functional drafting tool that allows Architects and Engineers to select multiple scales all in one product. The unique design incorporates a sculptured arch on the bottom for ease of movement. A rotating rod on the top displays one of six available scales on the front as well as a raised inking edge.Made from extruded aluminum with calibrations added using Alumicolor's photo anodizing process..Allows Architects and Engineers to select multiple scales all in one product.Unique design incorporates sculptured arch on bottom for ease of movement.Rotating rod on top displays one of six available scales on the front as well as a raised inking edge.Made from extruded aluminum with calibrations added using Alumicolor's photo anodizing process.description: architect.length: 12 in.
ChartpakĀ® Adjustable triangular scale for engineers has 12" measuring length with 1/32" scale that encloses exact calibration and is ideal for engineering flied. Scale is adjustable to 10, 20, 40 and 50 parts to" measurements..Dials at either end of scale.Engineer's scale: adjusts to 10, 20, 40, and 50 parts to the inch.12" measuring length with 1/32" scale, exact calibrations.Tape length: 12".Dimensions: 1.1(W) x 0.5(T).Material: Aluminum.Ruler type: Triangular scale.Adjustable scale for engineers with rotating dial at each end to change units.Designed for the exacting needs of engineers.Change units quickly and easily by rotating dial at either end of scale - no need to move the scale from the work surface.Change units with a simple twist of the dial.Architect's scale: adjusts to 1/16", 1/8", 1/4", 1/2", 1:1, and 2:1.ChartpakĀ® Adjustable triangular scale for engineers is made of solid aluminum for added durability and intends to provide accurate measurements.
The Staples 12" wooden ruler is hole punched, is imperial, features dual beveled edges, and is treated with a clear lacquer finish..Wood ruler.1/16" imperial and standard 1/10 metric scales.Measures up to 12".Select wood with a clear lacquer finish.Extra margins at the ends for clear starts and stops.Brass Beveled edges on each side.Edges are straight and true.Staples 12" wooden ruler is made from select wood with double brass beveled edges.