Monitor Arm for 30-Inch Monitors

The StarTech.com dual monitor mount in silver and black colors, features Interchangeable arms with quick connect for easy and flexible set-up. This mount offers to create dual monitor setup, side-by-side for up to 30" monitors or stacked for up to 24" monitors. Position your monitors at any desire angle using the full-motion arms with articulation and spring-assisted height adjustment. This stand features integrated cable management and rotates 360 deg for easy landscape-to-portrait screen rotation..Stackable dual monitor mount with full-motion arms.Steel, aluminum and plastic enclosure.Supports 30" display.Mounting surface thickness: desk clamp: 0.39 - 2.95", grommet clamp: 0.39 - 3.74".Number of displays supported: 2.One-touch height adjustment.Interchangeable arms with quick connect for easy and flexible set-up.Meets TAA standards.Includes 2-in-1 desk or grommet mount, M6 Allen key, M3 Allen key, base cushion, spring arm, thumb screws and instruction manual.Comes with 2 years warranty.Comes in black/silver.Rubber feet protect desk surface.2-year manufacturer limited warranty.Dual monitor mount with full-motion arms - stackable.

Small Articulating Desk Mount That’s Built Tough The MI-705 is one of Mount-It! S most durable, single monitor mounts that will assist you with creating open desk space and functionality. This adjustable mount allows you to easily adjust the viewing height to an ergonomic level to help reduce neck, back and eye strain with an adjustable arm that folds and extends up to 15" that can swing into any position. Features The MI-705 features a thick grade of steel, with a black powder coat for scratch resistance. This desk mount is constructed with a sturdy C-clamp that allows you to conveniently attach it to any desk to maximize your work space. Maximum thickness of mounting surface for desk clamp, 2.25". It also includes all of the necessary hardware with an instructional manual. Specifications The MI-705 fits most flat screen monitor from 13" to 30" with the VESA of 50x50 and 100x100mm, with the weight capacity of 33 lbs. This mount has a c-clamp, and adjustable pole to easily adjust the height level from 8.75" to 15" with an arm that extends 14.8" that can be swiveled 360 degrees. It also, provides you the ability to adjust your monitor by tilting it up to 12 downward degrees..SINGLE MONITOR ARM MOUNT: Fits one computer screen sizes 19-30 inches, with a maximum support weight of 33 pounds, using the 75x75mm or 100x100mm VESA square bolt hole pattern found on the back of the monitors. (measure distance, in millimeters, between bolt hole patterns if unsure of size).INTUITIVE FEATURES: VESA monitor stand is height adjustable and can be raised from 13" inches up to 18.5" inches. Cold-rolled steel construction is heavy duty and will stand the test of time. Comes with C-clamp base mount for use on desktops 1" - 2" inches thick..FULLY ADJUSTABLE: Monitor arm desk mount can tilt 15 degrees up and down, swivel 360 degrees on three different joints, and raise and/lower 5.5" inches..EASY INSTALLATION: Monitor swing arm comes with all mounting hardware, tools, and instructions necessary for assembly..Supported by manufacturer's limited lifetime warranty

The Staples TECH Single Monitor Arm Mount is ideal for ergonomic positioning of your monitor. The flexible and smooth movements of the monitor arm allow you to easily rotate, tilt, swivel and adjust the height of your monitor for optimal viewing..Ideal for ergonomic positioning of your monitors.Compatible with displays up to 30" and withstands a maximum load capacity of up to 19 lbs..Rotate, swivel, tilt and height adjustment functionality for optimal viewing.VESA compatible 4" x 4" and 3" x 3" (100 x 100mm and 75 x 75mm).Integrated cable management.Easy installation.Staples 100% Satisfaction Guarantee.Ideal for ergonomic positioning of your monitor.

The StarTech.com® ARMSLIMDUO dual monitor mount supports two 12" - 30" monitors, side-by-side. It features two independent arms with full-motion articulation to adjust your dual-monitor setup easily. This monitor mount provides two USB pass-through ports and two 3.5 mm audio ports for added connectivity. It supports up to 8 kg weight per mounting arm. This monitor mount has aluminum construction for enhanced durability. It offers 360 deg rotation around the support post and at the elbow. This monitor mount comes with integrated 4' 6" cables for USB and audio pass-through ports..Dual monitor mount for clutter-free workspace.Maximum size: 12" to 30", Load capacity: 17.7 lbs..Material: Durable aluminum construction.Pan angle: 180 deg, Tilt angle: 90 deg/ -65 deg down, Rotation angle: 360 deg, Swivel /pivot: 135 deg around the support post 360 deg at the elbow.Color: Black.VESA mount standard: 100 x 100, 75 x 75, Certifications and standards: RoHS.Maximum arm extension: 22.3", Maximum arm span: 44.7".Two independent arms with full-motion articulation and spring-assisted height adjustment.Two USB pass-through ports and two 3.5 mm audio ports.Landscape to portrait screen rotation.Hidden cable management hide cables for a clean installation.Integrated 4' 6" cables for USB and audio pass-through ports to hide cables for a clean installation.Mount on a desk or table using a C-clamp.Includes: One mounting arm, two desk clamps, two desk clamps, two VESA monitor mounts, eight M4 x 12 mm screws, eight M4x30 mm screws, eight spacers.Comes with 2 years warranty

In today's digital age, where people increasingly rely on computers for work, the time spent in front of monitors has significantly increased. This prolonged usage can lead to ergonomic injuries and the need for multitasking with multiple programs. Investing in a dual monitor arm mount offers several benefits. Businesses can enhance productivity by allowing employees to use multiple displays, facilitating multitasking without the need to switch between windows. This setup is particularly beneficial for jobs requiring various software programs. Additionally, dual monitor arm mounts promote better neck and eye health by enabling the adjustment of monitors to the optimal viewing angle, reducing strain and preventing ergonomic injuries. Moreover, with monitor arm desk mounts, employees can use mobile devices like laptops more effectively, creating a versatile workstation that mimics a home base desktop, allowing them to work from anywhere..Raise your monitor to a comfortable viewing height with this monitor arm.Supports a single monitor up to 30", weighing up to 17.6 lbs..Height adjusts from 0.4" to 17.7" for comfortable viewing.Made of aluminum.-45 to 90-degree tilt, -45 to 90-degree pan, and -45 to 90-degree rotation adjustment options enable optimal viewing.Weighs 5.9 lbs..Dimensions: 17.7"H x 17.5"W x 4.53"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.2-year manufacturer limited warranty

MI-33111-BLK single monitor desk mount features a single articulating arm with smooth, full motion adjustments including height, tilt, swivel and rotation. This desk mount is designed to position your monitor perfectly for a healthier, more comfortable way to work throughout the day. Save desk space while improving posture by elevating your monitor off of the desk to eye level. This premium single monitor mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The grommet base easily attaches to any desk up to 3.5” thick, making it an easy addition to any workspace. Fits monitors up to 32” with a weight capacity of 19.8lbs..Max Screen Size 30 inches.360 degree swivel.Extension 16 inches.Height adjustable 8 inches.Load Capacity 28 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty.Monitor Mount

Create a customized viewing arrangement with this Staples TECH dual-monitor arm. The desk-mount design creates a stable base to support your computer monitors, and the two independent arms let you swivel, tilt, and adjust each screen for optimum comfort. This Staples TECH dual-monitor arm is compatible with displays measuring up to 30 inches, providing flexible options for setting up your computer and peripherals..Raise your monitor to a comfortable viewing height with this gas spring dual monitor arm with full motion swivel.Supports up to 30" monitors for versatile use.Tilt, swivel, and rotation functions enable adjustments for comfortable viewing.Each arm securely holds up to 19 lbs. to fit most monitors (38 lbs. total load on height-adjustment assembly).Compatible with standard VESA mounting patterns: 75 x 75, 100 x 100.Meets VESA MIS-D mounting standard.Two installation options: clamp to the desk or mount using a grommet hole.Black finish adds to its overall aesthetic appeal.Cable management features allow wires to move free.Give your computer setup an upgrade with this Staples TECH dual-monitor arm.

Cubicle-Wall Monitor Hanger Height Adjustable Steel For up to 34" Monitors. Free up valuable desk space in your cubicle workstation with this cubicle monitor mount. It lets you mount a monitor on your cubicle wall to keep your work area more organized, comfortable and productive. Heavy-Duty Steel The cubicle monitor hanger, made of steel with a metallic silver finish, securely supports a 17" to 34" VESA mount monitor, with a maximum weight of 17.6 lb. (8 kg). Free Up Desk Space The cubicle wall monitor mount helps you free up surface area in your workspace, and keeps cables neat with integrated cable management. Adjustable for Ideal Viewing Adjust your screen height quickly, by pulling the lever while sliding the monitor to the desired height. Up to 12" of height adjustment accommodates a wide range of users. For customized viewing, tilt your monitor +/-10 degrees and swivel +/-10 degrees. The cubicle monitor mount also rotates +/-180 degrees, for landscape or portrait positioning. Scalable Solution Customize your work area by hanging multiple monitors, using several cubicle monitor hangers to create a multi-monitor workstation. The micro-adjustment feature lets you align your monitors in perfect unison. Plus, angle your monitors for optimum viewing. Virtually No Assembly The cubicle-wall monitor mount is easy to set up. The monitor mount works in most cubicles, with wall sizes from 1.5" to 3.5" in thickness. It's optimized for wall heights ranging from 19" to 30" above the desk surface. ARMCBLB is backed by a StarTech.com 5-year warranty and free, lifetime technical support..Raise your monitor to a comfortable viewing height with this monitor mount.Supports up to 35" monitors for versatile use.Made of plastic.-10 to 10 degree tilt and -180 to 180-degree rotation adjustment options enable optimal viewing.-180 to 180-degree rotation allows monitors to be oriented vertically or horizontally.Meets or exceed VESA standard.Comes in silver.Rubber feet protect desk surface.2-year manufacturer limited warranty

Upgrade your workstation and install your monitor at the proper height to improve posture and comfort. Adjust your screen position to improve functionality and efficiency. The articulating arm features 3 pivot points for a full range of motion. Retract, extend, tilt, and swivel to create the perfect computer or TV setup. Let your computer monitor adapt to your height and to your working style with this wall mount..MONITOR WALL MOUNTS allow you to clear valuable desktop space and to improve your posture by raising your monitor to eye level..FULL MOTION design allows you to adjust your monitor / TV to fit your viewing needs. Swivel / articulate 180 degrees, tilt up and down 15 degrees to reduce glare. Monitor can be installed either in portrait or landscape position. Tightening knob allows you to keep the display firmly in place or loosen to adjust more frequently..WALL MOUNT FOR SINGLE MONITOR set up fits most monitors in the market with the standard VESA patterns of 75x75 and 100x100. It will fit screens up to 30 inches if the monitor VESA pattern is compatible and weighs no more than 33 lbs..SIMPLE INSTALLATION, comes with everything you’ll need to securely mount your screen to a wood stud, concrete or brick wall. HEAVY-DUTY MATERIAL made from premium cold-rolled steel..Wall plate measures 1.75" W x 6" L.Supported by manufacturer's limited lifetime warranty.The MI-404 full motion wall mount allows to you clear desktop space and improves your posture by raising your monitor to eye level

The Platinum Series single black monitor arm from Fellowes provides ergonomic viewing to help relieve neck and eye strain while optimizing desk space. The fully-independent arm holds up to 17.6 lbs. or 32” monitors and is easily installed using the Quick Fit VESA plate. The arm features gas spring technology for effortless adjustment and horizontal or vertical viewing rotation. Easily mounts to tables or desks via clamp (between .4”-3.35” thick) or grommet (between .33”-2.75” in diameter). An innovative cable management system reduces clutter and keeps you productive..SUPPORTS: Supports a single monitor up to 32" and 17.6 lbs., perfect for home, office, or gaming setups..GAS SPRING TECHNOLOGY: Fully independent adjustable arms with gas spring technology offer 19.75" reach for increased workspace flexibility and ergonomic comfort..EASY INSTALLATION: Quick-Fit VESA plate ensures easy installation on tables or desks using either a clamp or grommet..USB PORTS: Integrated USB ports at the base provide convenient charging for your devices while you work..FULL MOTION: Full motion adjustability with 360° rotation and +/-45° tilt, plus integrated cable management, keeps your workspace tidy and optimized..WARRANTY: Extended 5 Year Limited Warranty.Elevate your workspace with the Fellowes Platinum Series single monitor arm. This black gas spring technology monitor arm is designed to create effortless adjustments while being functional and comfortable. It provides an ergonomic viewing experience while maximizing desk space.

The MI-2752L allows you to raise your monitors at an ergonomic position and free up valuable desk space with this dual monitor mount. Designed for performance, this desk mount is made from high grade steel built to stand the test of time and supports screens up to 22 lbs. each arm and screen size up to 32". Adjustable height, tilt, swivel and rotation functionalities offer optimal viewing angles. Comes with cable management clips to keep your wires organized..Fits two displays up to32 inches in size, with a maximum support weight of 22 pounds on each arm, using the 75x75mm or 100x100mm VESA square bolt holes pattern found on the back of the monitor. (measure distance, in millimeters, between bolt hole patterns if unsure of size).Constructed of heavy duty steel, integrated cable management clips keep your cables organized, comes with interchangeable C-clamp or grommet bases, and mounting plates are detachable for easy monitor mounting..Comes with all mounting hardware, tools, and instructions necessary for assembly. Mounting plates can be removed, attached to your monitors, then re-attached to the stand in a few minutes for easy installation..Monitors can tilt up 90 degrees and down 90 degrees, swivel left and right 180 degrees at two different joints, and each screen can be rotated 360 degrees and held in portrait or landscape orientation independent of one another. Arm raises and lowers a total of 17 inches on the center pole..Supported by manufacturer's limited lifetime warranty.The MI-2752L full motion monitor arm mount helps you increase productivity and clear up extra space on your desk

MI-2761 premium monitor desk mount merges functionality with aesthetics. By elevating your monitor above your desk, increase desktop space and get ergonomic positioning of your screens for reduced strain and better sitting posture. Fluid and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Single monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitor to switch between landscape and portrait modes..Screen Sizes: 17" - 32".Fully adjustable counterbalance arm with mechanical spring.Weight capacity: 17.6 lbs..Spring Arm Height adjustable up to 11.5 inches.Tilt: 90 degrees up / 90 degrees down.Swivel: 360 degrees at two joints and 180 degrees at one joint.Rotate: 360 degree (between landscape and portrait modes).Integrated cable management system.Desktop thickness: 0.39-3.3 inches.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty

MI-43114 dual monitor wall mount features two swivel arms for smooth full motion monitor adjustments. From monitor tilt to swivel and rotation, this monitor wall mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and maximizing space in the office or at home. This premium dual monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen each of the monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. Each arm features a cable management port to hide and organize cables for a clean look. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Dual LCD wall mount compatible with screens up to 30".Tilt 105 degrees, Rotate and Swivel 360 degrees.44lb total weight capacity. Sleek modern silver finish.Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Atdec Ora is a sophisticated monitor arm with clamp for modern ergonomic workspaces. Its patented design fuses Atdec's domain experience with innovative material and manufacturing techniques for outstanding aesthetics and performance. Ora achieves high and extremely stable capacity despite its sleek, minimalist form. The arm's stability and power come from the single-piece monocoque architecture that augments strength, amplified by natural geometric forces created via arm movement. Ora's design is vibration-resistant for a crisp and confident user experience. The arm is interactive, with a wide latitude at each point of movement. Intelligent fingertip adjustment lets users achieve the optimal ergonomic setup as they move, change from sit to stand, or share workspaces. Ora can tilt 45 degrees for comfortable touch-screen operation in workspace or point-of-service environments..Sophisticated monitor arm with clamp for modern ergonomic workspaces.Complete, full-featured monitor arm for a single curved or flat display up to 35".Made of aluminum, steel, and engineering polymers in black.Integrated toolless 180-degree arm rotation limiter to prevent interference with walls and workstation dividers.Weight: 8.6 lbs..VESA mounting dimensions: 75 x 75mm, 100 x 100mm.Balanced tilt mechanism for dynamic viewing angle selection.Effortless counterbalance adjustment with an easy-to-read gauge for fast bulk deployments.Provides adjustable portrait-to-landscape rotation tension.Contemporary styling to suit modern workplace interiors.Discreet cable management guides cables down the arm to the work surface.Package contents: dynamic arm, desk clamp, VESA plate, and display mounting fasteners.Compatible with the AW-FB Ora bolt through fixing (sold separately).10-year manufacturer limited warranty

You no longer need for a wall or desk to mount a monitor. With Amer pole mount monitor arm, all you need is a pole! This monitor arm integrate a clamp and adjustable monitor arm that mount quickly and easily to a 1.1"-2.4"Dia. (28mm to 60mm) diameter pole. They're the perfect mounting solution when conventional mounting isn't available..Create your perfect workspace with this pivot pole mount monitor arm.Supports a monitor up to 32" and 17.6 lbs. for versatile use.Made of steel and plastic in matte black.360-degree rotation around the pole provides optimal viewing.Dimensions: 4.5"H x 4.5"W x 5.5"D.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Free-tilting design makes easy forward or backward adjustment for better viewing and reduced glare.Pole clamp attaches to circular tube firmly

You no longer need a wall or desk to mount a monitor. With Amer pole mount monitor arm, all you need is a pole! These monitor arms integrate a clamp and adjustable monitor arm that mount quickly and easily to a 1.1"-2.4"Dia. (28mm to 60mm) diameter pole. They're the perfect mounting solution when conventional mounting isn't available..Create your perfect workspace with this full-motion pivot pole mount monitor arm.Supports a monitor up to 32" and 17.6 lbs. for versatile use.Made of steel and plastic in matte black.360-degree rotation around the pole provides optimal viewing.Dimensions: 5.6"H x 4.5"W x 13.8"D.Compatible with: VESA 75 x 75mm and 100 x 100mm mounting patterns.Free-tilting design makes easy forward or backward adjustment for better viewing and reduced glare.Pole clamp attaches to circular tube firmly.Swiveling arm offers maximum viewing flexibility.Cable management keeps everything organized

The StarTech.com® ARMPIVWALL single-monitor arm in black, is suitable for 12 to 30" screen. This one touch height adjustment arm easily mounts your monitor on a wall to save space. It provides effortless height and viewing angle adjustments..Single monitor arm is an essential tool in the modern office.Dimensions: 4.3"H x 24.4"W x 4.5"D.Comes in black color.Screen size supported: 12 to 30".Arm style: Gas spring, maximum arm extension: 24.4".Load capacity: 19.9 lbs..Swivel: 360 deg full circle, tilt: +90/-65 deg, pan: 180 deg.VESA mount standard: 100mm x 100mm, 75mm x 75mm.Maximum height: 11.8".Easy one-touch height adjustment makes the monitor arm ideal for shared workspaces with multiple alternating users, such as hotel meeting rooms.Sturdy mounting arm helps you save space on your desk or table surface, by letting you securely wall mount a computer monitor or flat screen.Full motion articulating arm makes it easy to find the right viewing angle, just tilt or swivel your monitor to share your display.Requires minimal assembly and features a built-in level, which helps you to position the arm assembly perfectly upright when mounting it to the wall.Features built-in cable management to help keep your cables neat and tidy.Includes cover, wall plate, M5 Allen key, M6 screw, two 6.3mm x 65mm screws, four M4 x 12mm screws, four M4 x 25mm screws, two anchors.Meets RoHS, WEEE standards.Weight: 3.8 lbs..Comes with 2 year warranty

MI-45114 dual monitor wall mount features two gas spring arms for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor wall mount is designed to maximize the user’s efficiency and comfort. Boost productivity and enhance workflow with double the screen space, while improving posture and maximizing space in the office or at home. This premium dual monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen each of the monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. Each arm features a cable management port to hide and organize cables for a clean look. Each arm can carry monitors measuring in size up to 32” and up to 19.8lbs per mounting arm..Dual Monitor Wall Mount fits most of 13" -30" Computer Screens.Gas Spring Arms have Tilt, Swivel, Height Adjustable and Rotating Features.Each monitor can tilt up or down 90 degrees and rotate 360 degrees.Load capacity 39.6 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

The Atdec AWMS-4-4675 is a quad 18" arm combination attached to a 29.5" post with F-clamp. Display height, optimal viewing angle, and orientation can be set to individual requirements. Built of lightweight yet durable aluminum, the mount can be easily recycled at the end of its life..Raise your monitor to a comfortable viewing height with this quad-arm monitor mount.Supports four displays up to 30" in landscape orientation or up to 22" in portrait mode.Comes in black and made of aluminum.-25 to 45-degree tilt, 360-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Compatible with: VESA 75 x 75mm, and 100 x 100mm mounting patterns.Rubber feet protect desk surface.Compatible with flat screens with maximum weight up to 26.5 lbs. or curved screens with maximum weight up to 17.6 lbs. per monitor.Modular, adaptable, and upgradeable design.10-year manufacturer limited warranty

The j5create JTSA101 is a gas spring monitor mount. The single arm can hold a screen up to 32" weighing up to 17.6 lbs. Easily adjust your screen to any height. The gas spring allows the screen to swivel 180 degrees, tilt from -45 to 90 degrees, and rotate 360 degrees. Conveniently set your monitor at an optimal angle. This monitor mount gives you the ability to create a more efficient workspace, whether you need extra space or a standing desk setup..Raise your monitor to a comfortable viewing height with this single-arm monitor mount.Supports a monitor up to 32" and 17.6 lbs. for versatile use.Comes in black and made of aluminum, steel, and plastic.-45 to 90-degree tilt, -90 to 90-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Weight: 4.3 lbs..Dimensions: 12.6"H x 3.54"W x 18.3"D.Compatible with VESA 100 x 100 and 75 x 75 mounting patterns.Simple to install, the mount includes clear instructions and all necessary tools.Rubber feet protect desk surface.2-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Monoprice® 33 lbs. 3 Way adjustable tilting desk mount bracket can be attached to the edge of the horizontal surface. Bracket provides an extra space by moving the monitor above the desk and supports 13" - 30" flat displays..Black.13" - 30" display support, 0.8" - 14.7" extension, 8.75" - 15" height.Weight capacity: Up to 33 lbs..Tilt angle: +or-12 deg.Construction: Steel and aluminum.Rotation angle: 360 deg.Fits monitors with VESA 50x50, 75 x 75 and 100 x 100 mounting patterns.Mount attaches to the edge of a desk, table or other horizontal surface with a thickness between 0.87" - 2.25".Bracket allows to position monitor at eye level, which reduces neck and back strain and aches from length sessions in front of the computer.Provides additional desk space by moving the monitor above the desk.Compatibility: LCD/LED Monitor.Compliance: RoHS.Monoprice® 33 lbs. 3 Way adjustable tilting desk mount bracket in black color is made of steel for durability and supports 13" - 30" LCD/LED.

Elevate your monitor to maximize desk space and reduce eye, neck, and shoulder strain. This Fellowes monitor stand is fully height- and depth-adjustable for optimum viewing control and a cost-effective ergonomic solution. This monitor arm features a single design with built-in cable management to keep you tangle-free. Easy install using the quick fit VESA plate with either a desk clamp (0.38”-3.5” thick) and grommet (0.44”-2.75” diameter) mount included for secure and easy attachment options. The Reflex experience seamlessly adjusts with 360° rotation, 180° swivel, and +/- 45° tilt for optimal viewing angles..MAXIMIZE PRODUCTIVITY: Free up valuable work space for maximum productivity and collaborate with colleagues effortlessly with the Reflex monitor arm.SUPPORTS: Single monitor up to 32" and 17.6 lbs., optimizing desk space with ergonomic design ideal for home or office.ADJUSTABLE HEIGHT & DEPTH: This fully independent monitor mount by Fellowes is adjustable by height and depth to achieve optimum viewing control and a cost effective ergonomic solution which helps reduce your risk of eye, neck and back strain.EASY INSTALLATION: Effortless installation. Quick-fit VESA plate simplifies monitor installation, ensuring hassle-free setup on desks or tables using clamp or grommet options.GET RID OF YOUR CLUTTER: Reduce clutter in your workspace with the Reflex monitor arm which features an intuitive cable management system which helps keep your cables organized.SPACE-SAVING: Compact and efficient space-saving design to free up valuable workspace.WARRANTY: Extended 5 Year Limited Warranty

Single-Display Wall Mount Aluminum Tool-less Assembly| For up to 34" Monitors. Free up space with this wall-mount monitor arm and enjoy optimum viewing with the long dual-swivel extension arm. The premium design ensures smooth, effortless motion and makes it easy to re-position your display, to work in comfort or collaborate with others. The attractive silver finish complements your decor. The wall-mount system is ideal for business, healthcare, financial or other settings, where you may want to share your screen, or for customer-facing interactive displays. Adjust the Dual-Swivel Arm with Ease The wall-mount monitor arm extends a full 20.4" (52 cm) and has three swivel points, offering an extended range of motion. Move the dual-swivel arms left or right, to change your screen position. You can also adjust the swivel tension. Durable and Stable Construction The robust aluminum design provides a stable wall-mount for your computer monitor or flat-screen TV up to 34". It's ideal for touch-screen stability. The universal display wall mount supports VESA mount monitors (75x75, 100x100) up to 30.9 lb. (14 kg) in weight. Adjust your Viewing Angle Share your screen with ease. The display wall mount offers a full +180-degree/-180-degree pan, to move your screen left or right. It tilts freely +90/-15-degrees, to adjust the angle up or down. Rotate your screen for landscape or portrait viewing. Low-Profile Design Push the swivel arm back to the wall, so your monitor sits just 5" (129 mm) from the wall when not in use. Tool-less Assembly The quick slide-and-click connections make the monitor wall mount easy to assemble and saves time when setting up multiple units. The TAA compliant ARMWALLDSLP is backed by a StarTech.com 10-year warranty and free lifetime technical support..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 30" monitors for versatile use.Made of aluminum.-15 to 90-degree tilt, -15 to 90-degree pan, and -15 to 90-degree rotation adjustment options enable optimal viewing.Compatible with: VESA 100 x 100mm mounting patterns.Comes in silver.Rubber feet protect desk surface.2-year manufacturer limited warranty

Mount-It! MI-2752 is a dual monitor mount that raises your monitors to an ergonomic position to help you work more efficiently. Designed for performance, this mount is made from high-strength steel for durability and includes both clamp and grommet installation components to fit a variety of desktops. The arms can be raised and lowered on the pole for easy height adjustment. Tilt your screen at 90 degrees up and down or swivel it at 180 degrees up and down to find your most comfortable reading, and integrated cable management keeps your cords off your desktop. All necessary instructions and hardware included..ERGONOMIC DUAL MONITOR MOUNT: Raise your monitors/screens to the optimal viewing height to reduce neck stain and back stiffness. Cable management clips keep your desk neat organized..STURDY SUPPORT and HIGH QUALITY CONSTRUCTION: Heavy-duty steel monitor mount can support to 27" monitors for versatile use with a weight capacity of 22 lbs. per arm for a total capacity of 44 lbs..FULLY ADJUSTABLE: Mount arms can tilt up and down 90 degrees, swivel left and right 180 degrees, raise and lower 17" inches (the height of pole), and each screen can be rotated and placed in portrait or landscape orientation independent of one another.WIDELY COMPATIBLE: Works with screens from 13" to 32" in size and works with the standard 75x75mm or 100x100m VESA square bolt hole patterns.EASY INSTALLATION: 2-monitor stand comes with all mounting hardware, tools, and instructions necessary for assembly. The detachable VESA plates make mounting a breeze and can be adjusted up to 1” to perfectly align the height of monitors. Includes interchangeable C-clamp mount (works with desks up to 4" in width) and grommet base mount (works with desks up to 3.25" in width).Supported by manufacturer's lifetime limited warranty.The MI-2752 dual monitor arm mount helps you increase productivity and clear up extra space on your desk

Free up desk space and maximize your ergonomic viewing with the Allsop Freestanding Dual Monitor Arms. A perfect solution for any desk, the freestanding base allows it to be placed virtually anywhere and unlike clamp-on arm systems it doesn’t require a desk edge for mounting. The full-motion articulating arms allow users to pan, tilt, rotate, and raise monitors to find the perfect ergonomic position. Easy VESA mounting for two monitors up to 32”..Articulating arms allows user to pan, tilt, rotate, and raise monitors to find the perfect ergonomic position..Detachable VESA mount provides easy monitor installation and accommodates monitors 17” - 32” in size..Micro-adjust screw allows user to fine-tune monitor placement for nearly seamless side-by-side viewing.Sturdy freestanding base keeps monitors in place while also providing a convenient smartphone slot.Free Standing Dual Monitor Arms

Elevate your workspace with the Mount-It! MI-2781 dual monitor stand, designed to enhance ergonomics and efficiency. Crafted from high-strength steel for lasting durability, this stand features a freestanding base for quick desktop installation. Easily adjust the height of the arms on the pole, and enjoy multiple monitor angles with tilt and swivel options for comfortable viewing. Integrated cable management keeps your workspace tidy. Compatible with screen sizes 13" to 32", VESA 75x75 and 100x100, and supports up to 17.6 lbs. per arm. With a tilt range of +45°~-45°, swivel range of +90°~-90°, and screen rotation of +180°~-180°, this stand offers versatile positioning. Pole height is 18.3". All necessary instructions and hardware included..ERGONOMIC DUAL MONITOR MOUNT: Raise your monitors/screens to the optimal viewing height to reduce neck stain and back stiffness. Cable management clips keep your desk neat organized..STURDY SUPPORT and HIGH QUALITY CONSTRUCTION: Heavy-duty steel monitor mount can support to 32" monitors for versatile use with a weight capacity of 17.6 lbs. per arm..FULLY ADJUSTABLE: Monitor arms have arms which tilt +/- 45 degrees, swivel left-right 360 degrees, and can be raised and lowered on the 18.3" center pole, offering a more ergonomic positioning of your computer screens, while saving room on your desktop. Each screen can be placed in portrait or landscape orientation independent of one another..WIDELY COMPATIBLE: Works with screens from 19" to 32" in size and works with the standard 75x75mm or 100x100m VESA square bolt hole patterns.EASY INSTALLATION: 2-monitor stand comes with all mounting hardware, tools, and instructions necessary for assembly. Mounting plates can be removed, attached to monitors and reattached to the stand in just a few minutes. Stable freestanding base supports use on desktop..Supported by manufacturer's lifetime limited warranty.Mount two 13" to 32" LCD displays on your desk with this Mount-It! dual monitor desk stand LCD mount to improve productivity.

Create your perfect immersive gaming station or a professional multiscreen desk setup with this Mount-It! desk mount for monitors with screen size up to 35" and weight up to 44 lbs. The mount's optimized heavy-duty tilting and gas spring mechanisms allow for smooth and stable adjustment of large screens. The full-motion design enables you to lower and raise, swivel, tilt, and rotate your screens to achieve the perfect viewing height and angle. To fully immerse in your game, this mount features RGB lighting along the arms and on the base: simply switch between 20 different modes by pressing the easily accessible RGB mode button on the base. Both, a clamp and grommet mount are included for easy installation on your desk. The detachable VESA plate with 75 x 75 and 100 x 100 hole patterns allows for quick installation of your monitors, and the integrated cable management ensures neat and organized cable routing along the arms..Create your perfect immersive gaming station with this heavy-duty dual monitor arm.Fits two large screens, each up to 35" and 44 lbs..Arms are height-adjustable from 8.54" to 19.68".Made of aluminum and steel in a combination of grayish white and matte black finishes.Full-motion design with a 360-degree screen rotation, 180-degree swivel, and tilt up to +50/-20 degrees ensures you get the optimal viewing angle.Base dimensions: 7"W x 4.5"D (total wingspan: up to 36").Compatible with 75 x 75 and 100 x 100 VESA patterns.Powerful gas spring arms offer a smooth and stable adjustment with a maximum extension of 18".Integrated USB-powered RGB lighting with 20 different effects enhances any gaming station.Built-in cable management allows you to route the cable underneath the arms for a clean and organized workspace.Extra-sturdy clamp and grommet mounting options included (recommended tabletop thickness: 0.39"-3.34" for clamp and 0.39"-1.88" for grommet).1-year manufacturer limited warranty

The SIIG Adjustable Monitor Arm (CE-MT2K12-S1) is a versatile and space-saving solution designed to support monitors up to 32 inches, making it ideal for both home and office environments. Finished in sleek black, this monitor arm offers full motion adjustability—including tilt, swivel, and rotation—so you can easily position your screen for optimal viewing comfort and reduced eye and neck strain. Its durable construction ensures reliable performance, while the integrated cable management system keeps your workspace neat and clutter-free. Compatible with VESA mounting patterns, this monitor arm combines ergonomic functionality with a modern, professional look..Supports up to 17" monitors for versatile use.Made of aluminum.-35 to 35-degree tilt, -35 to 35-degree pan, and -35 to 35-degree rotation adjustment options enable optimal viewing.Weighs 3.3lbs..Dimensions: 11.2"H x 4.5"W x 14.3"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.3-year manufacturer limited warranty.3-year manufacturer limited warranty

The Platinum Series single silver monitor arm from Fellowes provides ergonomic viewing to help relieve neck and eye strain while optimizing desk space. The fully-independent arm holds up to 17.6 lbs. or 40” monitors and is easily installed using the Quick Fit VESA plate. The arm features gas spring technology for effortless adjustment and horizontal or vertical viewing rotation. Easily mounts to tables or desks via clamp (between .4”-3.35” thick) or grommet (between .33”-2.75” in diameter). An innovative cable management system reduces clutter and keeps you productive..SUPPORTS: Supports a single monitor up to 40" and 17.6 lbs., perfect for home, office, or gaming setups..GAS SPRING TECHNOLOGY: Fully independent adjustable arms with gas spring technology offer 19.75" reach for increased workspace flexibility and ergonomic comfort..EASY INSTALLATION: Quick-Fit VESA plate ensures easy installation on tables or desks using either a clamp or grommet..USB PORTS: Integrated USB ports at the base provide convenient charging for your devices while you work..FULL MOTION: Full motion adjustability with 360° rotation and +/-45° tilt, plus integrated cable management, keeps your workspace tidy and optimized..WARRANTY: Extended 5 Year Limited Warranty.Elevate your workspace with the Fellowes Platinum Series single monitor arm. This gas spring technology monitor arm is designed to create effortless adjustments while being functional and comfortable. It provides an ergonomic viewing experience while maximizing desk space.

MI-1771 is one of our premium desk mounts that merges functionality with aestatics. Increase viewing comfort-help reduce eye, back and neck strain. Swift and easy movements and adjustments. The spring arm tension can be adjusted to suit the weight of the monitors, allowing fingertip height adjustment. Single monitor arm adjusts effortlessly for easy use. Full motion arms extend and retract, tilt, swivel and adjust in height. You can also rotate the monitor to switch between landscape and portrait modes. By elevating your monitor above your desk, increase desktop space and get ergonomic positioning of your screens fore reduced strain and better sitting posture. The monitor arm is compatible with VESA patterns (100x100 mm and 75 x 75 mm). If your monitor has mounting holes in the back, this mount will work with it..Single Monitor Desk Mount Stand fits most of 13" -32" Displays.Tilt, Swivel, Full Motion and Rotating Features.Dual base allows c-clamp or grommet connection.Height Adjustable to 13".40 lbs. Capacity.10-year manufacturer limited warranty

This single arm monitor wall mount helps clear out your desktop space and raise your monitor for a more ergonomic installation. Raising monitors to eye level helps prevent common issues such as neck, back pain, and eye strain. We utilized the best gas spring components available in the market to make the height adjustment fluid and easy. The tension on the gas spring can be increased or decreased to the adjust the amount of counterbalance for the weight of your monitors - allowing fingertip height adjustment. The full motion design allows tilt up and down, swivel left and right, as well as the ability to push the monitor towards the wall or extend them away from the wall. You can position the monitor exactly as you wish. The slide-in VESA plate allows you to install the wall mount to the wall, connect the plates to your monitor and slide the monitor into the wall mount with easy..Single Monitor Wall Mount fits most of 13"-32" Screens.Tilt, Swivel, Full Motion and Height Adjustable Features.Each monitor can tilt up 90 degrees or down 45 degrees and rotates 180 degrees.Distance From the Wall: 3.5"es min, 17.7"es max.Load capacity 14.3 lbs..Supported by manufacturer's limited lifetime warranty

Free up space while creating an ergonomic work environment. This desk-mount monitor arm makes it easy to securely mount your display above your desk or table and adjust the height with one touch. You can mount a display ranging in size from 13" to 32" (330 mm to 813 mm), and the monitor arm features an attractive black finish that complements your workspace. Mount Your Monitor to Save Space : This heavy-duty monitor arm saves space on your work surface by elevating your monitor above your desk or table. One-Touch Height Adjustment : The monitor-mount arm features a gas-spring cylinder that makes it easy to raise or lower your display, with up to 13.1" (335 mm) of height adjustment. Adjust the tension according to the weight of your monitor, to re-position the monitor height effortlessly. Adjust Your Monitor for Ideal Viewing : The full-motion articulating monitor arm extends up to 23.8" (605 mm) so it's easy to find the right viewing angle. Swivel your monitor 180 degrees to share your display, while collaborating with others. Tilt your screen 90 degrees for comfortable viewing or rotate it 180 degrees for landscape or portrait viewing. Easy Installation : The VESA monitor mount is easy to install (desk C-clamp or grommet mount) and offers built-in cable management. The detachable VESA panel makes it simple to attach or remove your monitor. ARMPIVOTHDB is backed by a StarTech 2-year warranty and free lifetime technical support..Single-monitor arm saves space by letting you mount a monitor up to 32" (813 mm) weighing up to 19.8 lb. (9 kg).Durable, heavy-duty aluminum construction with attractive black finish.Easy one-touch height adjustment (up to 13.1" /335 mm) with gas spring arm.Hassle-free installation with detachable VESA panel and integrated cable management.Articulating arm rotates and swivels 180, and provides +90 / -90 tilt

MI-35114 single monitor wall mount features an articulating gas spring arm for smooth full motion monitor adjustments. From height adjustment, to monitor tilt, swivel and rotation, this monitor wall mount is designed to save space while improving posture by raising the monitor to eye level in any type of environment. This premium monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add, remove, shorten or lengthen the monitor-mounting arm, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. The easy to install wall mount requires only a single stud for installation making it a quick addition to any workspace. The arm features a cable management port to hide and organize cables for a clean look. Fits monitors measuring in size up to 32” and can hold up to 19.8lbs..Single Monitor Wall Mountcompatible with screens up to 32".Tilt, Swivel, Full Motion and Articulating Features.Each monitor can tilt up or down 105 degrees and rotates 360 degrees.Load capacity 20 lbs..Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

Optimize a dual-screen setup with this adjustable monitor arm. Once attached, monitors can be independently adjusted by rotating, extending, tilting, or lifting them, and screens can be rotated a full 360 degrees and elevated more than 16 inches above a desk. This Fellowes dual arm supports a total weight of 48 pounds, enough to hold two modestly sized monitors at once..Two fully adjustable monitor arms for optimum viewing control.Easy to mount - clamp attaches to desktops 1-3” thick or through grommet holes at least 3-1/4” in diameter.Elevates monitors from 3-1/2” to 16-1/2” above the desk with a reach of 2-1/2”-27”.Tilts up or down +/-37° and freely swings left or right (360° rotation capability).Each arm holds a flat panel monitor up to 24 lbs..Meets VESA mounting standards.Dimensions: 22"H x 4.38"W x 38.75"D.3-year manufacturer limited warranty.Adjust the view of your monitors using this Fellowes Professional Series adjustable depth dual arm.

Whether at home or in the office, everyone deserves a workspace that looks great and makes them feel their best. Create a neat, productive workspace with this affordable monitor arm that's easy to set up and backed by Ergotron's trusted reputation for quality..Single Monitor Mount, Material & Color: Black.Desk Clamp attaches to surface edge up to 1.97" (50 mm) thick.Capacity ≤ 17.6 lbs.Tilt: 35°.Pan: 180°.Rotation: 360°.Warranty: 5 years

Improve posture, promote proper eye alignment and support neck and shoulder comfort with this adjustable monitor arm. Ergonomically designed to promote wellness and increase productivity, SmartFit One-Touch Dual adjustable monitor arm incorporates Kensington's patented SmartFit technology to simplify proper fit and allows users to adjust the height, depth and angle of their monitors for individualized comfort. The arm is stable at any monitor position: users can easily switch from landscape to portrait mode, or from stacked to side-by-side configurations. An ideal monitor arm for the modern office and a perfect complement to the SmartFit Sit/Stand Desk (K52804WW)..Raise your monitor to a comfortable viewing height with this dual monitor arm.Supports 13"-32" flat or curved monitors.Full-motion, one-touch adjustable arms with built-in gas spring.Made of aluminum, plastic, and steel.-90 to 90-degree tilt and 180-degree rotation adjustment options enable optimal viewing.180-degree rotation allows monitors to be oriented vertically or horizontally.Supports monitors weighing up to 19.8 lbs..Dimensions: 26.4"H x 4.9"W x 43.3"D.Compatible with VESA 100 x 100mm mounting patterns.Meets or exceeds ANSI/BIFMA standards.Comes in silver gray.Rubber feet protect desk surface.2-year manufacturer limited warranty

MI-31114-BLK low-profile single monitor wall mount features tilt, swivel and rotation to achieve the perfect monitor placement throughout the day. Mounting your monitor on the wall frees up desk and office space and raises your monitor to eye level, for a healthier way to work by helping you to maintain a better posture. This premium single monitor wall mount is fully TAA (Trade Agreements Act) compliant and is suited for purchase by the U.S. government. It is a modular monitor mount, meaning it is fully customizable with the ability to add or remove monitor-mounting arms, which allows an organization to develop cost-effective, tailored solutions for their employees’ needs. Heavy load capacity carries up to 44lbs and only requires one wall stud for easier installation. Fits monitors up to 32”..Single Monitor Wall Mount fits most of 13" -30" Screens.Tilt, Swivel, Full Motion and Articulating Features.Each monitor can swivel 180 degrees and rotates 360 degrees.Monitor can be installed either in portrait or landscape shape.Compatible with the Mount-It!® Modular Monitor Mount Series that allows you to quickly create custom desk setups with quick release, interchangeable parts..TAA (Trade Agreements Act) compliant.Supported by manufacturer's limited lifetime warranty

The j5create JTSA102 is a dual-arm gas spring monitor mount. Each of the arms can hold a screen up to 32" weighing up to 17.6 lbs. Easily adjust your screens to any height. The gas springs allow the screens to swivel 180 degrees, tilt from -45 to 90 degrees, and rotate 360 degrees. Conveniently set your monitors at an optimal angle. This monitor mount gives you the ability to create a more efficient workspace, whether you need extra space or a standing desk setup..Raise your monitor to a comfortable viewing height with this double-arm monitor mount.Each of the arms supports a monitor up to 32" and 17.6 lbs. for versatile use.Comes in black and made of aluminum, steel, and plastic.-45 to 90-degree tilt, -90 to 90-degree pan, and 360-degree rotation adjustment options enable optimal viewing.Weight: 7.05 lbs..Dimensions: 12.6"H x 5.51"W x 18.3"D.Compatible with VESA 100 x 100 and 75 x 75 mounting patterns.Simple to install, the mount includes clear instructions and all necessary tools.Rubber feet protect desk surface.2-year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Four Monitor Mount Height Adjustable For Up to 32" Monitors. Boost productivity and customize your workspace with this quad-monitor stand, suspending four monitors above your desk. Enjoy optimum viewing with four articulating monitor arms, providing a wide range of motion. The free-standing base gives you flexibility in placing your setup within your workspace. Designed for Productivity Constructed of aluminum and steel, the heavy-duty four-monitor stand lets you set up your workspace for optimum productivity. The monitor stand supports four VESA mount (75x75, 100x100) monitors up to 32" each, with a maximum weight capacity of up to 17.6 lb./8 kg per display. Create a More Ergonomic Workspace Create a multi-monitor workstation that works best for you. Take advantage of four-screen efficiency for financial analysis, web coding, video editing or many other applications. Customize your setup by adjusting your display height, position and viewing angles for an ergonomic workspace. The swiveling arms provide maximum viewing flexibility. Height-Adjustable Monitor Mount Place your monitors at the ideal height. Simply adjust the display height along the 34" (864 mm) pole. Align your monitors with the micro-adjustment feature. Enjoy Optimum Viewing The four-screen monitor stand lets you extend the articulating arms up to 16.6" (42.2 cm) to position your monitors in the ideal position. Tilt your monitors +90/-40 degrees and swivel 360 degrees. Rotate your displays 360 degrees for portrait or landscape viewing. Keep Cables Out of View Neatly route your cables with the cable-management channels. ARMQUADSS is backed by a StarTech.com 5-year warranty and free lifetime technical support..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 32" monitors for versatile use.Made of aluminum.-40 to 90 degree tilt and 360-degree rotation adjustment options enable optimal viewing.360-degree rotation allows monitors to be oriented vertically or horizontally.Weighs 15.2 lbs..Dimensions: 4.9"H x 13.7"W x 21.77"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in gray.Rubber feet protect desk surface.5-year manufacturer limited warranty

The FlexiSpot D1D-E mount was designed specifically for use with all FlexiSpot sit-to-stand desk risers. Each riser has a small grommet hole on the top surface to attach the mount. The D1D-E includes a bolt and a low profile bracket for securing tightly through the grommet hole. The D1D-E also includes a heavy duty C-clamp for attaching to a standard desktop so you can standardize your office design with a single mount for either risers or desks..Dual monitor mount with low profile grommet attachment hardware and C-clamp attachment hardware.For monitors up to 30".Minimum height 7.9" to maximum height 15.7".Mount is black powder-coated steel.180 degree swivel, 15 degree tilt, 360 degree rotation.Dual monitor mount for FlexiSpot sit-to-stand risers

Elevate your workspace with the Fellowes Professional Series Adjustable Freestanding Single Monitor Arm, designed to support monitors up to 32 inches and 17.6 lbs. Its freestanding design offers maximum flexibility, making it ideal for environments where clamp or grommet mounting isn’t an option. The low-profile, weighted base ensures stability, while the intuitive cable management system keeps your desk neat and organized. Easily adjust your monitor to reduce eye, neck, and shoulder strain, and create a more ergonomic and productive workstation..Freestanding design allows for increased flexibility and can be used in spaces that do not allow a clamp or grommet mount.Create a productive workspace and position your monitor to reduce eye, neck and shoulder strain.Low profile, weighted base provides enhanced stability.Minimize clutter with the intuitive cord management system.Holds 32” monitors up to 17.6 lbs..Meets VESA mounting standards.Dimensions: 18.31"H x 11.03" W x 28.56" H.3 Year Limited Warranty

Desk Mount Dual Monitor Arm - Desk Clamp VESA Compatible Monitor Mount for up to 32 inch Displays - Ergonomic Articulating Monitor Arm - Height Adjustable/Tilt/Swivel/Rotating (ARMDUAL3).32 INCH LARGE MONITOR SUPPORT: VESA 75x75mm / 100x100mm compatible multi monitor mount supports 2 large monitors up to 32" (17.6 lb. / 8 kg) per arm w/ horizontal articulation & basic height adjustment.ADJUSTABLE SET UP: Use the desk-clamp (C-clamp) to easily mount and tighten by hand to a desktop (40-85 mm thickness) & cable management clips to hold incl. tools for quick height & angle adjustment.EASY DISPLAY ROTATION: This desk mount dual monitor arm has articulating arms that support toolless monitor rotation from landscape to portrait positioning for viewing longer pages without scrolling.SLEEK DESIGN: Streamlined look w/ small footprint enhances the work area and built-in adjustable cable management clips along the arms and center pole keep cables organized for a presentable workspace.WIDE RANGE OF MOTION: Double monitor mount increases ergonomic comfort and productivity with +30/-30° tilt, +90/-90° swivel, 360° rotating display, and height adjustment along the 15.7" (39.8 cm) pole.Dimensions: 19.6"H x 34.1"W x 4.9"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in black.Rubber feet protect desk surface.5-year manufacturer limited warranty.Monitor Mount | Desk C-Clamp | Dual Swivel Arms | Adjustable | For up to 32” Monitors

The dual monitor desk mount accommodates flat or curved monitors weighing up to 17.6 lbs (8 kg) each. It offers five movements: height adjustment, rotation, fold, swivel, and tilt. The minimum height from the screen connection center to the desk is 2.4 inches (6 cm), while the maximum height is 15.2 inches (38.5 cm). Assembly is quick and easy, with no drilling required for surfaces up to 3.3 inches (8.5 cm) thick. Additionally, it can be permanently connected to the desk using included screws. The mount ensures a wide range of movement for an ergonomically suitable viewing position. It supports VESA standard sizes of 75x75 mm and 100x100 mm, safety-tested for a load of 33 lbs (18 kg) per arm. The mount is also compatible with larger screen sizes, provided their specifications align with the mount..5 movements - Height adjustment, rotation, fold, swivel & tilt.Maximum height from screen connection center to the desk: 15.2" / 38.5 cm..Quick and easy assembly to surfaces up to 3.3" / 8.5 cm thick without drilling..Movement options allow Height adjustment, 360° rotation, 180° fold, 180° screen connection plate swivel, 360.screen rotation for portrait or landscape orientation and a tool-free tilt from -95° till 75°.Fits TVs with VESA standard (Bracket Mounting Holes Patterns) 75x75 and 100x100 mm..Maximum width per screen: 29.5"/ 75 cm.Mount assures wide movement range to reach ergonomically suited viewing position.

The Rocstor ErgoReach ED7 Premium Single Ergonomic Heavy-Duty Monitor Arm delivers ultimate ergonomic comfort and style. Engineered to support flat and curved monitors up to 57" and compatible with multiple VESA standards (75x75, 100x100, 100x200, 200x100, 200x200), this robust monitor arm can handle displays weighing up to 27kg (59.4 lbs.). Constructed with durable aluminum and featuring a premium gas spring mechanism, it allows for smooth and precise adjustments. The full-motion swivel arm provides an ergonomic tilt range of +60°/-20° and a swivel range of ±90°, ensuring optimal viewing angles and reducing strain during extended use. Our products are RoHS and REACH compliant, ensuring adherence to stringent environmental and safety standards..Heavy-Duty Adjustable Monitor Arm, Designed for Ergonomic Use.Supports Monitors up to 57", Single Arm Configuration.Black Finish, Made of Durable Aluminum and Steel.±90°, Tilt: ±60°, Rotation: 90°, Swivel: ±90°.Dimensions: 5.2" x 21.7″ x 28.7″ (131 x 550 x 730mm).VESA Compatible 75×75, 100×100, 100×200, 200×100, 200×200.Complies with RoHS and TAA Standards.Limited Warranty 5 Year

Raise your monitor to an ergonomic position and free up desk space with this single monitor mount. Designed for performance, this mount is made from aluminum and steel for sturdy use. This mount includes both clamp and grommet installation components to fit a variety of desktops. Gas spring allows for smooth and easy height adjustment. Tilt and swivel functionality offer multiple monitor angles for comfortable reading, and integrated cable management keeps your cords off your desktop..Screen Size: 17" - 32".Monitor Weight Capacity: 17.6 lbs..Arm Extension: 19.5" - 21.5".Screen Rotation: +180°,-180°.VESA Compatible: 75x75, 100x100.Tilt: +35°,-35°.Swivel: +90°,-90°.Material: Aluminum, Plastic, Steel.Fits all Samsung, LG, ACER, ASUS, HP, DELL, VIEWSONIC, SONY and other branded monitors with VESA 75 and VESA 100 mounting patterns.Supported by manufacturer's limited lifetime warranty

Whether you are working from home or in an office, this monitor stand with spring assisted arm allows you to adjust your monitor height to your personal ergonomic viewing position. It comes with a stable, freestanding base which means you can easily place it anywhere without having to worry about clamp or grommet mounting. The monitor stand fits screens between 17" and 32" in size with a weight between 4.4 and 17.6 lbs. and comes with a quick release VESA plate (75x75 & 100x100) for easy installation. If you ever want to turn your screen to share it or reduce glare, the integrated swivel feature allows for up to 25° turning left and right. The screen itself can be rotated 180° left and right so that you can view it in horizontal as well as vertical orientation. Keep your cords organized and your workplace neat with the integrated cable management..This freestanding monitor arm with stable base allows you to adjust the height of your screen and achieve an ergonomic viewing experience.The stand supports a single monitor between 17" to 32" in size, including curved screens..The monitor height can be adjusted up to a maximum of 20.6 inches..This monitor arm is black in color and made from steel for durability..The mount allows for ±25° swivel, +10°/-15° tilt, ±180° screen rotation and pivot, and provides a wide viewing angle of up to 180°..The assembled dimensions are 20.6 inches in height, 10.6 inches in width, and 7.9 inches in depth..It is compatible with VESA mounting patterns of 75x75mm and 100x100mm..An integrated cable management system keeps your cords organized and the quick release VESA plate ensures easy monitor installation.Perfect for office and home use.Supported by Limited Lifetime Warranty.Work Comfortably with Effortless Monitor Height Adjustments, Quick and Simple Monitor Positioning, No Clamp Needed

The premium single display desk mount is built for environments where style, workplace adaptability, ergonomic support, and a high range of movement are paramount. Its spring-assisted design with three points of articulation and landscape to portrait rotation enables effortless adjustment from a seated position and makes it the ideal solution for Activity Based Workplaces. The arm incorporates a spring tension visual gauge indicator to save time and effort with multiple installations. Built from lightweight and yet durable aluminum, the mount can be easily recycled at the end of its life..Single Display Desk Mount, Ideal for displays up to 32".Flat Screen Monitors: maximum load up to 20lbs..Curved Screen Monitors: maximum load up to 13.5lbs..Direct to desk 24" dynamic arm desk mount.Built from lightweight and yet durable aluminum. Color: Silver.Includes spring assisted height adjustability, maximum arm reach is 24", tilt adjustment is 45 degrees up and 45 degrees down. Can rotate up to 360 degrees around pole, and can accommodate portrait and landscape screen rotation..10 lbs..VESA 75x75 to 100x100.Package dimensions: 22.30" x 12.40" x 6.60"

Increase your productivity, with a workstation that fits the way you work. Designed for a wide range of motion, this wall-mounted computer workstation is easily adjustable with independent arms for your monitor and keyboard. Move the wall-mounted sit-stand desk into position to work. Then push it back against the wall when not in use, folding the arms close to the wall. It's perfect for use in hospitals, clinics, warehouses, and other space-limited areas. Extend the articulating monitor arm up to 25.6" (65 cm) from the wall. For ideal positioning, tilt or swivel your monitor, or rotate 360 degrees. The sit-stand workstation supports a VESA mount (75x75, 100x100) monitor up to 30", with a maximum weight of 19.8 lb. (9 kg). This wall-mounted height-adjustable desk enables a wide range of users to work in comfort. Adjust the height of both arms along the pole up to 17.5" (44.5 cm), plus the spring monitor arm has a height adjustment range of 10.6" (27 cm). Place your keyboard where you need it, with an independent keyboard tray that extends up to 30.9" (78.4 cm) from the wall. Tilt the keyboard back to make sure your wrists are in a neutral position while typing. Place your mouse in the holder when not in use. The modular design, with quick slide-and-click connections, makes installation easy and saves time when setting up multiple units..Raise your monitor to a comfortable viewing height with this monitor arm.Supports up to 30" monitors for versatile use.Made of aluminum.-15 to 90-degree tilt, -15 to 90-degree pan, and -15 to 90-degree rotation adjustment options enable optimal viewing.Weighs 24.7 lbs..Dimensions: 48.43"H x 26.9"W x 29.2"D.Compatible with: VESA 100 x 100mm mounting patterns.Comes in silver.2-year manufacturer limited warranty