Multi Gigabit Switch
56 results
Expand your home or office's network capacity with fast and reliable connections using the MS305 5-Port 2.5Gb Ethernet Unmanaged Switch from Netgear. This unmanaged network switch integrates into your network without requiring any complicated configuring. Its five Ethernet ports each support up to 2.5Gb transfer rates with compatible computers, servers, network storage drives, and other devices. The 25 Gb/s switching capacity and 3.72 Mpps forwarding rate help to ensure smooth data transfers. This compact switch may be mounted onto a desktop or wall, and its fanless design allows it to operate silently in the background..Features 5 Ethernet ports, Multi-Gigabit performance class, and is an Unmanaged Switch.Offers a data transfer rate of up to 2.5Gbps per port.Compact desktop form factor with optional wall-mounting capability.Supports basic QoS (Quality of Service) through 802.1p traffic prioritization.Total switching throughput of 25Gbps and operates in store-and-forward mode.Consumes up to 9.24 watts and supports IEEE 802.3az Energy Efficient Ethernet for reduced power usage during low data activity.Simple set up with no software or configuration needed.Easy monitoring through per port LEDs for port activity and speed.Non-blocking switching architecture for maximum throughput at wire speed.3-Year Limited Warranty
Quickly and easily expand your business's network capacity to support additional computers, servers, access points, and other devices with the Netgear MS105 5-Port 2.5G Unmanaged Network Switch. Featuring five 2.5G speed Ethernet ports with a 25 Gb/s switching capacity 3.72 Mpps forwarding rate, this unmanaged switch is designed to deliver fast and smooth data transfers. Simply connect the switch to your network to get started. No complicated setup or configuration is required..Equipped with 5 Ethernet ports, supports Multi-Gigabit Ethernet speeds, and operates as an Unmanaged Switch.Each port on the device delivers data transfer speeds of up to 2.5 Gbps.Compact desktop form factor with optional wall-mounting capability.Total switching throughput of 25 Gbps and operates in a non-blocking, full-duplex mode for optimal performance.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Simple set up with no software or configuration needed.Easy monitoring through per port LEDs for port activity and speed.Energy Efficient Ethernet (IEEE 802.3az) support for maxium power savings.Non-blocking switching architecture for maximum throughput at wire speed.Limited Lifetime Hardware Warranty
The SISPM1040-582-LRT is a full managed PoE++ switch suitable for connecting and powering devices in hardened environment. It has (8) 10/100/1000 PoE++ ports with (2) 100/1000 dual speed SFP slots. The switch can supply up to 90 Watts per port on four ports or 60 Watts per port on eight ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
The SISPM1040-362-LRT is a full managed PoE+ switch suitable for connecting and powering devices in hardened environments. The switch can supply up to 30 Watts per port on all four PoE ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..Store-and-Forward Architecture with 16 Gbps Switching Bandwidth.Supports Jumbo frames up to 9.6K Bytes.Ring Protections: Industry standard G.8032 Ethernet Ring Protection Switching (ERPS), Support G.8031 Ethernet Linear Protection Switching (EPS), Rapid Ring with recovery time less than 20ms.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
This switch is a high performance Layer 2 managed switch with 52Gbps switching capacity. It provides (24) 10/100/1000 copper ports and (2) dual speed 100/1000 dual speed SFP slots. (4) of the ports are SFP/RJ-45 Combo ports..Features 24 networking ports to establish large network.Supports optical fiber cable to span longer distances and provided high data transmission rates between servers and network components.Up to 10x faster than standard Ethernet server connectivity while providing high-performance uplinks.Built-in power supply to ensure all components are being supplied with accurate voltage
Pure compatibility, pure stability, pure design. The perfect fit for any stable, future-proof system, even where space is limited..This unmanaged Gigabit Ethernet switch features five ports, supports speeds of 10/100/1000 Mbps, and operates without the need for configuration..Data transfer rate of 10/100/1000 Mbps, supporting Gigabit Ethernet speeds.It has a mega compact form factor, measuring just 55 x 55 x 16 mm (2.17 x 2.17 x 0.63 inches), which is smaller than a standard business card..Designed for straightforward plug-and-play operation without the need for configuration.With a throughput of 10/100/1000 Mbps, this device supports Gigabit Ethernet speeds and operates in a non-blocking layer 2 mode, ensuring efficient data transfer without packet loss..Maximum power consumption of 3.3W.Industrial operating temp (-40 °C to +85 °C / -40°F to +176°F).Seamless integration with design software - logical placements and fixed distances.Board to board and board to cable connection.LEDs visible in all orientations – can be directed to outer casing via fiber optics or light pipe, or electrically wired.Comes with a 10 year limited warranty
Introducing the NETGEAR MS510TXUP Multi-Gigabit/10G Ethernet Ultra60 PoE++ Smart Switch with 2 SFP+ Ports and 295W PoE budget for WiFi 6 Access Point connectivity and power..Four 1G/2.5G Ethernet ports and Four Multi-Gig/10G Ethernet ports.8 PoE++ ports with 295W total power budget.2 x 10G SFP+ ports.Management software with easy-to-use GUI interface offers secure setup, access, and SNMP (NMS 300) management. Includes NETGEAR Insight to remotely manage your networks from anywhere..Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.Reduces fan noise to protect your home office or business environment..Covered by ProSAFE, an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Dimensions in Inches: 13L x 8.12W x 1.7H; Weight in Pounds: 5.5.Insight Cloud Management, Desktop/Rackmount, ProSAFE Lifetime Protection
Built for Security, IoT, Mobility, and Cloud The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: ? Simplified device deployment ? Unified management of wired and wireless networks ? Network virtualization and segmentation ? Group-based policies ? Context-based analytics.Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
Built for Security, IoT, Mobility, and Cloud The Cisco Catalyst 9300 Series Switches are Cisco's lead stackable enterprise switching platform built for security, IoT, mobility, and cloud. They are the next generation of the industry's most widely deployed switching platform. The Catalyst 9300 Series switches form the foundational building block for Software-Defined Access (SD-Access), Cisco's lead enterprise architecture. At 480 Gbps, they are the industry's highest-density stacking bandwidth solution with the most flexible uplink architecture. The Catalyst 9300 Series is the first optimized platform for high-density 802.11ac Wave2. It sets new maximums for network scale. These switches are also ready for the future, with an x86 CPU architecture and more memory, enabling them to host containers and run third-party applications and scripts natively within the switch. The Catalyst 9300 Series is designed for Cisco StackWise virtual technology, providing flexible deployment with support for nonstop forwarding with stateful switchover (NSF/SSO), for the most resilient architecture in a stackable sub-50-ms solution. The highly resilient and efficient power architecture features Cisco StackPower, which delivers high-density Cisco Universal Power Over Ethernet (Cisco UPOE) and Power over Ethernet Plus (PoE+) ports. The switches are based on the Cisco Unified Access Data Plane 2.0 (UADP) 2.0 architecture which not only protects your investment but also allows a larger scale and higher throughput. A modern operating system, open Cisco IOS XE with programmability offers advanced security capabilities and Internet of Things (IoT) convergence. The foundation of Software-Defined Access Advanced persistent security threats. The exponential growth of Internet of Things (IoT) devices. Mobility everywhere. Cloud adoption. All of these require a network fabric that integrates advanced hardware and software innovations to automate, secure, and simplify customer networks. The goal of this network fabric is to enable customer revenue growth by accelerating the rollout of business services. The Cisco Digital Network Architecture (Cisco DNA) with SD-Access is the network fabric that powers business. It is an open and extensible, software-driven architecture that accelerates and simplifies your enterprise network operations. The programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks so they can focus instead on innovation that positively transforms your business. SD-Access enables policy-based automation from edge to cloud with foundational capabilities. These include: ? Simplified device deployment ? Unified management of wired and wireless networks ? Network virtualization and segmentation ? Group-based policies ? Context-based analytics.Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
The Grandstream GWN7813P is a high-performance Layer 3 managed switch designed for medium-to-large enterprise networks. Featuring 24 Gigabit Ethernet ports with PoE++ support and 4 10G SFP+ uplinks, it delivers up to 128Gbps switching capacity for seamless data flow. Smart power control enables dynamic PoE allocation per port, with a total budget of 360W and up to 60W per port. Advanced security features like ARP inspection, IP source guard, and DoS protection safeguard your network, while built-in QoS and ACL filtering optimize traffic prioritization. The GWN7813P supports IPv4/IPv6 routing, stacking, and is managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms. Its versatile mounting options and robust design make it ideal for scalable, secure, and intelligent business deployments..24 Gigabit ports and Layer 3 managed switching for enterprise-grade control..Enables dynamic PoE++ allocation with up to 60W per port and 360W total power budget..Up to 128Gbps switching capacity and supports 4 high-speed 10G uplinks..Suitable for desktop, wall, or rack mounting with included installation accessories..Supports SNMP v1/v2c/v3 for remote monitoring and network diagnostics..Prioritizes traffic using advanced QoS with shaping, scheduling, and rate limiting..Secures networks with ARP inspection, IP guard, DoS defense, and port isolation..Operates with VLANs, link aggregation, and dynamic routing protocols like OSPF and BGP..Optimizes energy use with smart power control and efficient fan speed adjustment..Certified by FCC, CE, RCM, IC, and UKCA for global compliance and safety standards.
This switch is an unmanaged full Gigabit Ethernet hardened PoE+ switch that complies with IEEE 802.3at and IEEE 802.3af. The switch has (8) 10/100/1000Base-T PoE+ ports with two 100/1000 dual speed SFP slots. It can deliver up to 30 Watts on each PoE+ port simultaneously. The SISTP1040-382-LRT can be used at the edge of a hardened network to provide connections for PoE devices in hazardous locations. The two fiber uplink ports can also be used in a daisy chain for maximum network reliability. It has redundant input power connections to ensure safe reliable operation in temperatures between -40°C and +75°C. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other hazardous environments..Support Jumbo Frame up to 9K bytes.Layer 2 wire-speed switching engine.Ruggedized metal closure.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
Brainboxes Industrial compact 5-port Gigabit Ethernet unmanaged switch is perfect factory floor, in vehicle and marine applications. Automatic detection of data transmission speed: 10/100/1000 Mbps. Dual input redundant power supply with wide voltage range means it can be powered from USB or on the 24V factory floor. Power terminal is removable with numbered pins for easy wiring. Power consumption is optimized based on the status of the link device. No software required..This unmanaged compact Ethernet switch is perfect for factory floor, in-vehicle, and marine applications.Contains 5 x RJ45 jacks, 10/100/1000Mbs autosensing (auto-MDIX) Ethernet ports.No software required: simply plug in any ethernet cable.Dimensions: 3.9"H x 3.7"W x 0.9"D.Power consumption: 3.6W.Certifications and standards: Meets or exceeds the Microsoft Certified Gold Partner, WEEE, RoHS, AEO (C-TPAT), CE standards.Nonconducting polyamide case with all-round small profile.Easy wire-removable screw terminal block.All Ethernet ports are auto-MDI/MDIX supporting straight through or crossover Ethernet cables.Integral DIN mount with ground.Lifetime manufacturer limited warranty
The Netgear® XSM4316S-100NES ProSAFE® M4300 series intelligent edge managed GbE switch is a stackable L3 managed 8-port GbE switch that comes with 10G and 1G models in a variety of form factors and PoE+ full provisioning. The design of this switch is perfect for full power PoE+ edge, redundant top of rack server/storage interconnect and for dependable SMB core deployment. The switch offers you an innovative mixed spin and leaf, 1G and 10G stacking with non-stop forwarding and hitless failover redundancy. Stacking and distributed link aggregation allows for multi-resiliency with zero downtime and load balancing capabilities..Managed switch delivers robust performance and intelligent switching.Compatible with PC.Comes in black color.Interface/ports: 8 x 10/100/1000/10000.Expansion slots: 8 x SFP+ 10 Gigabit.Switching capacity: 320 Gbps.Layer supported: Layer 3.Ethernet technology: Gigabit Ethernet, 10 Gigabit Ethernet, network technology: 10GBase-T, 10GBase-X, 1000Base-T, 1000Base-X.Remote management protocol: CLI, HTTPS, SNMP, SSH, Telnet, routing protocol: IGMP, IGMPv2, IGMPv3, MLDv2, OSPF, PIM-DM, PIM-SM, RIP, VRRP.Power: 120/230 VAC, 250 W.Authentication method: RADIUS, TACACS+.Form factor: Rack mountable
The Tenda SG105M is a 5-port Gigabit Ethernet switch designed for home and small office use. It offers a reliable and fast networking solution with auto-negotiation for 10/100/1000 Mbps speeds, providing seamless data transmission across your devices. The switch is unmanaged, making it simple to install and use without the need for complex configuration. With a compact form factor, the SG105M can be placed on a desk or mounted on a wall, offering versatility in placement. This switch is ideal for connecting PCs, smart TVs, game consoles, printers, and other Ethernet-enabled devices, enabling fast and stable wired connections. It supports plug-and-play functionality and ensures automatic connection speed adjustments based on the connected device. The SG105M is designed for low power consumption and comes equipped with essential features like auto MDI/MDIX, ensuring ease of use and compatibility with various network setups. The SG105M is a cost-effective solution for users seeking to expand their home or office network while maintaining high performance and efficiency..The Tenda SG105M features 5 Gigabit Ethernet ports, with Gigabit Ethernet performance class, and operates as an unmanaged switch, providing a simple plug-and-play solution without requiring network configuration..The switch supports data transfer rates of up to 1000 Mbps (Gigabit Ethernet), ensuring fast and stable network performance..The SG105M comes in a compact desktop form factor, suitable for home or small office environments..The Tenda SG105M does not support Simple Network Management Protocol (SNMP), as it is an unmanaged switch..The Tenda SG105M does not feature Quality of Service (QoS) capabilities, as it is designed to provide basic switching functionality without advanced traffic prioritization..The SG105M is an unmanaged switch with no advanced system management or security features, designed for simple network setups..The SG105M offers high throughput with a 10/100/1000 Mbps auto-negotiation feature, ensuring compatibility with a wide range of devices and network speeds..The SG105M is designed for low power consumption, incorporating energy-saving features that automatically power down unused ports to reduce energy usage..The Tenda SG105M complies with IEEE 802.3, IEEE 802.3u, and IEEE 802.3ab standards, ensuring broad compatibility and reliable performance with various network devices.
StarTech.com® 5-Port Industrial Ethernet switch is an ideal network solution for harsh industrial environments such as factory floors, warehouses or large junction boxes. Features redundant 12-58V DC terminal block power inputs to help prevent unnecessary downtime. Supports alarm relay contacts for an existing alarm circuit for quick notification during power disruption..Gigabit ethernet switch is perfect for industrial applications like warehouses and junction boxes without temperature control.Features 5 x 10/100/1000Base-T female RJ-45 network port/interface for easy connectivity.Supports Twisted pair media for easy data transfer.Transfers data reliably at the rate of 2 Gb/s.Comes with durable black steel enclosure.Works with 12 - 58 VAC at 50/60 Hz and consumes 3.63 W power.Comes with link/activity, power, port transmission speed, alarm status indicators.Meets IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3u, IEEE 802.3x compliant.Comes with: 128 KB packet buffer, auto-uplink, energy efficient ethernet, flow control, full duplex mode features.Withstands the temperature of -40 to 75 deg C, -40 to 85 deg C of storage temperature and humidity of 5 - 95percentage for efficient operation.Contains 1x industrial ethernet switch, 2x wallmount brackets, 1x din rail clip, 4x screws, 1x terminal block and 1x instruction manual.Comes with 2 years warranty.StarTech.com® 5-Port Industrial Ethernet switch has IP30-rated DIN rail and wall-mountable metal enclosure. Supports IEEE 802.3x flow control and back-pressure.
D-Link® 10-port Managed gigabit ethernet switch features 10 gigabit Ethernet technology and 10/100/1000base-T network technology respectively. Switch has 8000 MAC addresses database..PoE switch.Dimensions: 1.73"H x 11.02"W x 7.08"D.Compatible with PC.Comes in black/silver color.Interfaces: 8 x 10/100/1000BASE-T PoE, 2 x SFP.Media type supported: Twisted pair, optical fiber, twisted pair cable standard: Category 5e, Ethernet technology: Gigabit Ethernet.Layer supported: 3, PoE standard: IEEE 802.3af & IEEE 802.3at, PoE capable ports: Ports 1 to 8: Up to 30W.Form factor: Rack mountable, desktop, network cables: UTP Cat.5, Cat.5e (100m max), EIA/TIA-568 100-ohm STP, transmission method: Store-and-forward.Manageable, management: VLAN, QoS, MIB, Syslog, diagnostic LEDs: Power (per device), PoE Max (per device), link/activity/speed.Switching capacity: 40 Gbps, MAC address table: 16, 000 entries per device, packet forwarding rate: 14.88 Mpps, packet buffer memory: 1.5MB.IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX (Fast Ethernet), IEEE 802.3ab 1000BASE-T (Gigabit Ethernet), auto-negotiation.Security: Broadcast multicast/unicast storm control, D-Link safeguard engine, DHCP server screening.IP-MAC-Port binding (smart binding) - Supports 512 address binding entries, ARP inspection, ARP + IP inspection, supports DHCP Snooping.Power source: Power supply, input voltage: 120 - 230 VAC, PoE power budget: Max. 78 W.Operating temperature: 23 - 122 deg F, storage temperature: -4 to 158 deg F, humidity: 0 - 95 % non-condensing (operating/storage).Meets FCC Class A, CE Class A, ICES-003, VCCI Class A, C-Tick, BSMI, Safety, cUL, CE LVD, ENERGY STAR, WEEE standards.Weight: 3.1 lbs..D-Link® 10-port Managed gigabit ethernet switch is compatible with 1U rack unit and requires input voltage of 110/220 VAC.
Create your own LAN and connect your PC, laptop, printer and other peripherals with the help of 4 ports..Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.Managed switch provides a reliable foundation for your network
Omada SG6654X, a L3 managed switch, offers L3 routing, swift 10 Gbps wired speed, stacking, and redundant power supplies, catering to convergence layer demands. It comes with 48× gigabit RJ45 ports, 6× 10 Gbps SFP+ slots, and physical stacking. Integrated with robust security and comprehensive management features, this switch ensures reliable performance for SMB, enterprise, and ISP networks..The TP-Link Omada SG6654X switch features 48 Gigabit Ethernet ports, providing ample connectivity for high-density networks. It belongs to the Multi-Gigabit performance class and operates as a fully managed switch, offering sophisticated control over network traffic and configuration..This switch supports Power over Ethernet (PoE), eliminating the need for additional power cables by supplying power directly through the Ethernet ports, making it convenient for powering PoE-enabled devices such as IP cameras and wireless access points..With a switching capacity of 216 Gbps and a forwarding rate of 160.7 Mpps, this switch ensures fast and reliable data transfer across your network, even in high-demand scenarios..The SG6654X is rack-mountable, making it easy to install in standard 19-inch network racks. This form factor is ideal for enterprise environments where space and organization are crucial..This switch does not offer wireless connectivity, focusing instead on providing high-performance wired network connections..It supports SNMP versions 1, 2c, and 3, allowing for seamless integration with network management systems for remote monitoring and management of network devices..The switch features Quality of Service (QoS) capabilities, including 802.1p and DSCP priority queuing, ensuring that critical traffic such as VoIP or video conferencing gets prioritized bandwidth for smoother performance..Advanced security features such as Access Control Lists (ACLs), 802.1X authentication, and IP-MAC-Port Binding ensure robust network protection. The switch also supports features like ARP Inspection and DoS defense to safeguard your network from malicious attacks..The switch operates in both Layer 2 and Layer 3 modes, supporting protocols like OSPF, RIP, and VRRP for dynamic routing, while ensuring excellent throughput for demanding applications..The SG6654X is designed with energy-efficient technologies, which automatically adjust power consumption based on link status and cable length, reducing operational costs without compromising performance..The switch adheres to IEEE 802.3ab/ae/z standards, ensuring compatibility with a wide range of networking equipment. It also complies with RoHS and CE certifications for environmental and safety standards..This product is not manufactured by a certified diverse organization, as no specific diversity designation (such as MBE) has been noted for this manufacturer..The switch supports stacking of up to 4 units, allowing network administrators to manage multiple switches as a single entity, thus simplifying network management and increasing scalability..Manufactured by TP-Link, a globally recognized leader in networking products, the Omada SG6654X is part of the Omada SDN platform, enabling centralized cloud management for flexible and efficient network control.
The Aruba 6300M switch series is a modern, flexible, and intelligent family of AOS-CX stackable switches perfect for access, aggregation and data center top-of-rack (TOR) deployments. With a cloud-centric design that combines a fully programmable OS with the Aruba network analytics engine, the Aruba 6300M extends industry-leading monitoring and troubleshooting capabilities to the access layer. Support of Aruba NetEdit and the Aruba CX mobile app verify that configurations are flawless and easy to deploy. A powerful Aruba Gen7 ASIC architecture delivers fast, non-blocking performance, meaning your network is ready for tomorrow's unpredictable demands. Aruba Virtual Stacking Framework (VSF) allows for stacking of up to 10 switches, providing scale and simplified management..Stackable switch is perfect for enterprise network access, aggregation, core and data center top-of-rack deployments.Features 24 x 1/2.5/5GbE BASE-T PoE and 4 x 1/10/25/50G SPF ports.Management security restricts access to critical configuration commands, provides multiple privilege levels with password protection, and local/remote syslog capabilities allow logging of all access.Throughput: 476Mpps.Dimensions: 1.73"H x 17.4"W x 15.2"D.Maximum power consumption: 131-139W with JL086A, JL087A, JL670A PSU; switching capacity: 640Gbps.Certifications and standards: Meets or exceeds UL, FCC standards.Allows for stacking of up to 10 switches, providing scale and simplified management.Stackable layer 3 switch with BGP, EVPN, VXLAN, VRF, and OSPF with robust security and QoS.Provides NetEdit support for automation, configuration, verification, and one-touch deployment with the mobile app.Offers redundancy and PoE customization with hot-swappable power supplies and fans.Memory and processor: 1.8GHz quad-core ARM Cortex-A72; 8GB DDR4 and 32GB eMMC with 8MB shared packet buffer memory.Class 6 PoE ports supporting up to 60W per port.Switch has two fan tray slots and comes with one fan tray installed.Lifetime manufacturer limited warranty
The Tenda SG108M is an 8-port Gigabit Ethernet switch designed to deliver high-speed, reliable wired connections for small offices, home offices, or any network setup. With its unmanaged switch design, the SG108M offers plug-and-play installation, requiring no advanced configuration to get started. It supports auto-negotiating RJ-45 ports for 10/100/1000 Mbps speeds and features Auto-MDI/MDIX, ensuring seamless compatibility with various devices and cable types. The compact and lightweight design makes the SG108M ideal for both desktop and wall-mounted installations. Its 16 Gbps switching capacity and 11.9 Mpps forwarding rate provide a smooth and efficient data transfer experience, while the 802.1p QoS support ensures prioritized traffic for latency-sensitive applications like video streaming and online gaming. The switch also supports IGMP snooping, optimizing multicast traffic for bandwidth efficiency. Built with energy-saving features, including Energy-Efficient Ethernet (EEE) technology, the SG108M dynamically adjusts power consumption based on link status and cable length, reducing energy usage without compromising performance. Its durable housing and fanless design ensure quiet operation and long-term reliability. Whether expanding an existing network or setting up a new one, the Tenda SG108M delivers fast, stable, and easy-to-use connectivity for a variety of networking needs..The Tenda SG108M features 8 Gigabit Ethernet ports, delivering high-performance connectivity in an unmanaged switch design for effortless plug-and-play operation..Supports a maximum data transfer rate of 10/100/1000 Mbps per port, ensuring fast and stable wired connections for devices..Compact desktop form factor with an option for wall-mounting, providing flexibility in installation and space-saving capabilities..The Tenda SG108M does not include wireless connectivity, offering dedicated wired Ethernet connections only..This switch does not support Simple Network Management Protocol (SNMP), emphasizing simplicity and ease of use..Equipped with 802.1p Quality of Service (QoS) support, the switch prioritizes latency-sensitive traffic for applications such as video streaming and online gaming..Features Auto-MDI/MDIX for automatic detection of cable types and link status monitoring, providing secure and efficient system management..Delivers a throughput capacity of up to 16 Gbps with a forwarding rate of 11.9 Mpps, ensuring high-performance switching in unmanaged mode..Designed with Energy-Efficient Ethernet (EEE) technology, it reduces power consumption by dynamically adjusting based on link status and cable length..Complies with IEEE 802.3, 802.3u, 802.3ab, and 802.3x standards, ensuring compatibility and reliable performance in diverse network environments.
The NETGEAR XS512EM Plus Switch is designed for desktop or rackmount and features 12-Ports of 100M/1G/2.5G/5G/10G Multi-Gigabit Ethernet, 2 x 10G SFP+ ports (2 are shared), ProSAFE Lifetime Protection and more..12 Multi-gig/10G Ethernet ports.2 x 1G/10G SFP+ ports (both are shared).Management software with easy-to-use GUI interface offers basic capabilities to configure, secure, and monitor your network..Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.Reduces fan noise to protect your home office or business environment..Covered by an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..NETGEAR Plus Switch
The unmanaged switch offers gigabit speeds to minimize transfer times and greatly enhance the ability to stream high-bandwidth files to connected devices without interference. PoE support lets you deploy network systems such as wireless access, IP telephony, or video surveillance solutions more quickly and at a lower cost, without having to install separate power supplies for individual devices..8-ports 10/100/1000Base-T gigabit Ethernet.Address database size: 8000 entries.Unmanaged switch.Interface/ports: 4 x PoE (RJ-45), 4 x PoE+ (RJ-45).Layer supported: 2.Form factor: Desktop, wall mountable.Dimensions: 1"(H) x 8.3"(W) x 4.1"(D).Input voltage: 54 VDC.Power consumption: 7 W.Media type supported: Twisted pair.Temperature: 0 - 50 deg C, Humidity: 10 - 90 % non-condensing.Easy plug and play connection.Wired connection speed up-to 1000 Mbps.Includes 8-port desktop gigabit PoE switch, power adapter, quick start guide.Certifications and standards: FCC class A, CE, 802.3/U/x/ab/az/af/at.Weight: 1.23 lbs..Warranty: Lifetime limited
NETGEAR Plus switches with PoE meet business networks growing needs by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus Switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. The Netgear MS108EUP supports 2.5 Gigabit speed connectivity and Power-Over-Ethernet (PoE) that can provide up to 60W/port. This switch can power devices such as VoIP phones, surveillance IP cameras, wireless access points and many other applications. Netgear Plus switch includes advance PoE control to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..8 x multi-gigabit Ethernet ports provide up to 2.5Gbps of dedicated non-blocking bandwidth each.4 x Ultra60 PoE++ and 4 x PoE+ ports provide a total of 230W of power, so you can charge and connect your devices with a single wire.40Gbps (10/100/1000Mbps) line-rate fabric ensures congestion-free connectivity with your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Business-friendly and easy-to-use web browser-based management GUI.Energy-Efficient Ethernet (IEEE 802.3az) support for maximum power savings.Advanced PoE controls: manage PoE prioritization, scheduling, power limit per port, and more for simple control over all PoE-powered devices.Fanless design makes this switch perfect for noise-sensitive environments.Simple, yet useful network set-up on top of plug-and-play connectivity.VLAN support for traffic segmentation.Auto “denial-of-service” (DoS) prevention.Energy-Efficient Ethernet (IEEE 802.3az) support for maximum power savings.Port mirroring for network monitoring.Loop prevention and broadcast storm controls.Lifetime 24/7 chat technical support.Lifetime manufacturer limited warranty
The Grandstream GWN7832 is a high-performance Layer 3 aggregation switch designed for enterprise-grade deployments. Featuring 12 SFP+ 10G ports, it delivers up to 240Gbps switching capacity and 178.56Mpps forwarding rate, ideal for handling peak network loads. Advanced VLAN segmentation, IGMP/MLD Snooping, and built-in QoS ensure optimized traffic flow and performance. Robust security features—including ARP inspection, IP source guard, and DoS protection—safeguard your infrastructure. With support for IPv4/IPv6, stacking, and dual power redundancy, the GWN7832 offers scalable reliability. Managed via Web GUI, CLI, SNMP, or Grandstream’s cloud platforms, it provides centralized control and simplified maintenance for modern business networks..Aggregates 12 SFP+ ports with Layer 3 managed switching for enterprise networks..Up to 240Gbps switching and 178.56Mpps forwarding rate..Mounts on desktop, wall, or rack with included kits..SNMP v1/v2c/v3 enables remote monitoring and diagnostics..Built-in QoS prioritizes traffic with advanced shaping and scheduling..Secures networks with ACL, 802.1X, MAC auth, and DoS protection..Operates with stacking, link aggregation, and dynamic routing protocols..Reduces power use via efficient PSU and surge protection..Complies with FCC, CE, RCM, IC, and UKCA standards.
This Transition Networks Lantronix eight 10/100/1000Base-T port switch with Auto-MDI/MDIX is an unmanaged multi-port switch that can be used to build high-performance switched networks. This switch is a store-and-forward device that offers low latency for high speed networking. It is designed for the core of the network backbone computing environment to solve traffic block problems at SME (small, medium enterprise) businesses..Eight-port 10/100/1000BASE-T switch with Auto-MDI/MDIX is an unmanaged multi-port switch that can be used to build high-performance switched networks.Eight gigabit ports provide a 16Gbps switching capacity to support edge network installations.Power consumption: 3.5W.Meets or exceeds the LVD, FCC, CE, and UL standards.Supports full and half duplex for 10/100Mbps and full duplex for 1000Mbps.Wire-speed packet filtering and forwarding rate.Supports jumbo frames up to 9KB.5-year manufacturer limited warranty
NETGEAR introduces the XS508M, the first 8-port 10-Gigabit/Multi-Gigabit Ethernet Switch with 1 SFP+ port for Home and Business with 1G/2.5G/5G/10G per port flexible connectivity. Each of the 4 Ethernet ports automatically detects which speed is needed by the connected device and provides the adequate connection speed. Modern, high-performance network devices such as 5G network cards, gamer PCs, desktop PCs, servers, NAS storage or AC Wave 2 Wireless Access Points now come with 2.5-Gigabit or 5-Gigabit connectivity. In order to benefit from the full potential of these high-speed devices, performance and coverage, the NETGEAR XS508M Multi-speed capabilities are THE solution for plug-and-play flexible connectivity for your modern business or home..Unmanaged switch provides eight ports with multi-gigabit connectivity to your devices.Expand your network instantly, and provide your devices with either 100Mbps, 1G, 2.5G, 5G, or 10G data transfer rate automatically.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the CE: CB 60950-1, LVD 60950-1, AUS/NZ: AS/NZS 60950-1, USA: UL 60950-1, SNE VA and Taiwan: BSMI (CNS 14336-1) standards.One SFP+ fiber port offers 1G/10G connectivity or high-speed uplink connectivity to your core network.Switch is whisper-quiet due to an active fan.Simple setup with no software or configuration needed.Durable metal case and long product life (shown by MTBF numbers).Certifications and standards: CB mark, UL/cUL Listed, IEC, AS/NZS, Russia EAC mark.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.
NETGEAR introduces the XS508M, the first 8-port 10-Gigabit/Multi-Gigabit Ethernet Switch with 1 SFP+ port for Home and Business with 1G/2.5G/5G/10G per port flexible connectivity. Each of the 4 Ethernet ports automatically detects which speed is needed by the connected device and provides the adequate connection speed. Modern, high-performance network devices such as 5G network cards, gamer PCs, desktop PCs, servers, NAS storage or AC Wave 2 Wireless Access Points now come with 2.5-Gigabit or 5-Gigabit connectivity. In order to benefit from the full potential of these high-speed devices, performance and coverage, the NETGEAR XS508M Multi-speed capabilities are THE solution for plug-and-play flexible connectivity for your modern business or home..Unmanaged switch provides eight ports with multi-gigabit connectivity to your devices.Expand your network instantly, and provide your devices with either 100Mbps, 1G, 2.5G, 5G, or 10G data transfer rate automatically.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the CE: CB 60950-1, LVD 60950-1, AUS/NZ: AS/NZS 60950-1, USA: UL 60950-1, SNE VA and Taiwan: BSMI (CNS 14336-1) standards.One SFP+ fiber port offers 1G/10G connectivity or high-speed uplink connectivity to your core network.Switch is whisper-quiet due to an active fan.Simple setup with no software or configuration needed.Durable metal case and long product life (shown by MTBF numbers).Certifications and standards: CB mark, UL/cUL Listed, IEC, AS/NZS, Russia EAC mark.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.
79fed5312f55810a4758d633bc638d55.Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
The Netgear M4350-24F4V Series is a 1RU layer 3 managed switch with 24x 10GBASE-X SFP+ ports and 4x 25GBASE-X SFP28 uplinks. Equipped with one slot for modular power supply (1+1 redundancy). Supports Virtual Chassis stacking provides non-stop forwarding (NSF) and hitless failover, NETGEAR IGMP Plus, AV User Interface, and Engage Controller speed up AV installations..Layer 3 managed switch with 24 x 10GBASE-X SFP+ ports with 4 25GBASE-X SFP28 uplinks.1/10/25G Gigabit Ethernet line rate ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Flexible management via easy-to-use web browser based management.Equipped with one slot for modular power supply (one-plus-one redundancy).Lifetime manufacturer limited warranty
79fed5312f55810a4758d633bc638d55.Features 48 networking ports to establish large network.Cascade to other network devices through the uplink port to expand your local area network.Stack port provides an easy and hassle-free way to extend your office network.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
The EnGenius Fit Managed Switch EWS2910P-FIT is an 8-port Gigabit PoE Layer 2 plus switch with a 55W PoE budget and 2 SFP uplink ports. It offers multiple management options for small business network environments, allowing you to select the cloud or on-premises management option that best suits your needs. With its business-class features, the EnGenius Fit Managed Switch provides secure, reliable, and high-performance switching while reducing capital and operating expenses for cost-conscious small businesses..Features 8 Ethernet ports, classified under Gigabit Ethernet performance, with Managed network management for advanced control and configuration..Delivers PoE+ (Power over Ethernet Plus) on all 8 ports, supplying up to 30W per port with a total power budget of 110W for connected devices like IP cameras and access points..Offers a data transfer rate of up to 20 Gbps..Designed with a wall-mountable form factor for flexible and space-saving installation..Supports Quality of Service (QoS) to prioritize bandwidth for critical applications like voice, video, and data traffic..Management capability provides control over setup and configuration of your network..Certified with CE, FCC, and IC standards for safety, electromagnetic compatibility, and wireless communication compliance.
Omada SG6428X is a high-performance L3 managed switch tailored for the convergence layer, featuring L3 routing, fast 10 Gbps wired speeds, stacking options, and redundant power supply modules. It includes 24× Gigabit RJ45 ports, 4× 10 Gbps SFP+ slots, physical stacking ability, and centralized management. Integrated with strong security and extensive management features, the SG6428X offers a dependable networking solution for SMBs, enterprises, and ISPs..The TP-Link SG6428X comes equipped with 24 Gigabit Ethernet RJ45 ports and 4 10G SFP+ slots, offering robust connectivity options. It is classified as a Layer 3 Managed Switch designed for high-performance networking environments with centralized or standalone network management capabilities via the Omada SDN cloud or web interface.This switch does not support Power over Ethernet (PoE), as it focuses on high-speed data transfer and network management rather than powering devices.The switch provides a data transfer rate of up to 10 Gbps on the SFP+ slots and 1 Gbps on the Ethernet ports, ensuring fast and reliable communication across your network.The form factor of the SG6428X is rackmountable, with dimensions of 17.3 × 15.0 × 1.7 inches (440 × 380 × 44 mm), making it a standard fit for data center or enterprise network setups.The TP-Link SG6428X does not support wireless connectivity, as it is designed strictly for wired network management and performance.For Simple Network Management Protocol (SNMP), the switch supports SNMP v1, v2c, and v3, providing versatile monitoring and control options for network administrators.The SG6428X includes advanced Quality of Service (QoS) features with 8 priority queues per port, enabling traffic shaping based on IEEE 802.1p and DSCP priorities, ensuring smoother and more efficient data flow across the network.The switch offers comprehensive system management and security features such as Port Security, ACL, 802.1X authentication, DoS defense, and MAC address binding, ensuring secure and reliable network operations.The throughput of the SG6428X is impressive, with a switching capacity of 128 Gbps and a packet forwarding rate of 95.2 Mpps. It supports multiple operational modes, including physical stacking (up to 4 units) for redundancy and enhanced network scalability.In terms of power consumption, the switch has a maximum consumption of 28.4 watts and incorporates energy-saving technologies, such as automatic power down on unused ports, helping reduce operational costs.The SG6428X complies with industry standards such as IEEE 802.3, 802.3u, 802.3ab, and supports certifications like FCC, CE, ensuring reliable performance and adherence to global networking standards.At this time, there is no available information suggesting that TP-Link or its SG6428X product qualifies under a diversity designation, such as being manufactured by a minority-owned business (MBE).The TP-Link SG6428X is built for enterprise networks requiring advanced Layer 3 management capabilities, including dynamic routing (RIP and OSPF) and VRRP, making it an ideal choice for high-performance setups.Additional features include centralized cloud-based management via the Omada SDN platform, enabling remote configuration, troubleshooting, and monitoring, simplifying network management for IT administrators
The Grandstream GWN7813 is a high-performance Layer 3 managed network switch designed for medium-to-large enterprises seeking scalable, secure, and intelligent networking. Equipped with 24 Gigabit Ethernet ports and 4 10G SFP+ uplink ports, it delivers a total switching capacity of 128Gbps and non-blocking throughput of 64Gbps. Advanced features include dynamic routing (RIP, OSPF, BGP), 4K VLAN support, IGMP/MLD snooping, and comprehensive QoS for traffic prioritization. Security is reinforced with ARP inspection, IP source guard, DoS protection, port isolation, and MAC authentication. The GWN7813 supports stacking of up to 4 devices and integrates seamlessly with Grandstream’s GDMS Networking and GWN Manager platforms for centralized cloud or on-premise management. With PoE++ support on ports 1–8, it powers IP phones, cameras, and access points efficiently. Designed for desktop, wall, or rack mounting, and backed by enterprise-grade reliability, the GWN7813 is ideal for building robust business networks..Features 24 Gigabit ports and 4 10G SFP+ uplinks in a managed Layer 3 switch.Powers PoE/PoE++ devices with smart dynamic allocation on ports 1–8.Delivers 128Gbps switching capacity and 64Gbps non-blocking throughput.Mounts easily on desktop, wall, or rack with included hardware.Supports SNMP v1, v2c, and v3 for remote monitoring and diagnostics.Prioritizes traffic using advanced QoS with multiple queue scheduling modes.Secures networks with 802.1X, MAC auth, DoS protection, and DHCP snooping.Enables dynamic routing with RIP, OSPF, BGP, and policy-based controls.Reduces power use with energy-efficient Ethernet and fan/power monitoring.Complies with FCC, CE, RCM, IC, and UKCA certifications for global deployment
055204f6a69f94130dbae780b5757299.Features 24 networking ports to meet the requirements of the most demanding workgroups.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Supports layer 3 switching for enhanced performance and usability.Managed switch provides a reliable foundation for your network.Built-in power supply to ensure all components are being supplied with accurate voltage.The desktop installation makes it ideal for deployments outside the wiring closet
TRENDnet® 5-Port Industrial Gigabit PoE+ DIN-Rail Switch.4 x Gigabit PoE+ ports, 1 x Gigabit port, 1 x Gigabit SFP slot, 6-pin terminal block, DC power connector, LED indicators and integrated DIN-Rail mount.Data transfer rate: 10 Mbps/20 Mbps Ethernet, 100 Mbps(half duplex)/200 Mbps(full duplex) Fast Ethernet, 2000 Mbps Gigabit, 2000 Mbps SX/LX.Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3at, IEEE 802.3af, IEEE 802.3x.Power adapter: 100 - 240 VAC, 50/60 Hz, 2 A input, 48 VDC, 3.34 A, 160 W max outputTerminal block: 48 - 57 VDC PWR (primary), 48 - 57 VDC RPS (redundant).Power consumption: 10 W min (standby), 130 W max, PoE budget: 120 W maxPoE: Up to 15.4 with port for PoE, up to 30 with port for PoE+, PoE: pin 1, 2 for power + and pin 3, 6 for power - (mode A).IP30 metal case, integrated DIN-rail mount, grounding point, 8 KV ESD protection, 6 kV surge protectionFull PoE+ power to each PoE+ port, alarm output triggered by power failure, auto store and automatic address learning and address aging.Operating temperature: - 40 - 70 deg C, operating humidity: 95 % non-condensing max.Includes TI-PG541, quick installation guide, DIN-rail kitCertifications and standards: CE, FCC, Shock (IEC 60068-2-27), freefall (IEC 60068-2-32), vibration (IEC 60068-2-6).Dimensions: 5.3" x 3.9" x 1.2".Weight: 1.2 lbs.Comes with lifetime limited warranty.Simply connect the headset to the computer and it is ready for use.Intuitive call-control unit attached to the cord allows for fast user adoption.Mono speaker.Optimized for all leading Unified Communications.Wideband audio sound.Noise-cancelling microphone.Crystal clear wideband sound.Soft and comfortable velour ear cushions.Adjustable headband.Superior noise-canceling microphone.Flexible boom arm tip for easy microphone adjustment.Plug-and-play USB connectivity and compatibility.Certifications and standards: CE; FCC; Shock (IEC 60068-2-27); freefall (IEC 60068-2-32); vibration (IEC 60068-2-6).⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.TRENDnet® 5-Port industrial Gigabit PoE+ DIN-rail switch has a switching capacity of 12 Gb/s and 120 W full PoE+ power budget for better performance.
d2d02946b158a8f055cb81e5358d3e7d.Built-in power supply to ensure all components are being supplied with accurate voltage.Supports layer 3 switching for enhanced performance and usability.Rack mounting enables you to organize wires & secure cables for professional installation.Managed switch provides a reliable foundation for your network.Optimize the performance of business networks with 10 Gigabit Ethernet connectivity.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Features 48 networking ports for connecting multiple peripherals, creating multiplayer gaming environments and establishing a connection to transfer large files instantly
The Cisco Catalyst IE3300 rugged series ushers in mainstream adoption of Gigabit Ethernet connectivity in a compact, form-factor, modular switch that is purpose-built for a wide variety of extended enterprise and industrial applications..Managed switch expanded module contains 16 copper (RJ45) 100/1000Mbps ports.Provides secure access for the high-speed applications in the industrial space, and delivers high-speed up to 10 Gigabit Ethernet connectivity in a compact form factor.DIN rail-mountable.User-friendly WebUI allows for easy configuration and monitoring, and eliminates the need for more complex, terminal emulation programs.Power consumption: 12W.Great for extended enterprise deployments in outdoor spaces, warehouses, and distribution centers.Fanless, convection-cooled with no moving parts for extended durability.Alarm I/O for monitoring and signaling to external equipment.Delivers multiple rings and redundant ring topologies for new network configurations.Provides enhanced flow and threat visibility.Enables optimization of the network infrastructure, reduces operation costs, and improves capacity planning and security incident detection.5-year manufacturer limited warranty
Elevate your enterprise network with the Grandstream GWN7822P, a high-performance Layer 3 multi-gigabit managed switch designed for medium-to-large businesses. Featuring 24 Gigabit ports—including 8 ultra-fast 2.5G ports—and 4 SFP+ uplinks, it delivers blazing 80Gbps switching capacity for seamless data flow. Smart PoE/PoE+/PoE++ power control supports up to 240W total output, ideal for powering IP phones, cameras, and access points. Advanced security protocols, ACL filtering, and built-in QoS ensure secure, prioritized traffic management. With support for IPv4/IPv6, stacking capabilities, and flexible management via embedded controller, GDMS, CLI, or GWN Manager, the GWN7822P offers unmatched scalability and control..24 Ethernet ports, multi-gigabit speed, and fully managed Layer 3 switching..Powers devices via dynamic PoE/PoE+/PoE++ with up to 240W total output..80Gbps switching capacity for high-speed enterprise networking..Built for rack mounting, ideal for structured and scalable network setups..Enables SNMP v1/v2c/v3 for advanced network monitoring and control..Prioritizes traffic intelligently using built-in Quality of Service (QoS)..Secures access with ACL filtering, 802.1X, MAC auth, and AAA protocols..Supports stacking, link aggregation, and dual boot for resilient operations..Optimizes power use with smart control and optional redundant power supply..Meets FCC, CE, RCM, and IC compliance standards for global deployment.
Build and expand your network with the Ubiquiti UniFi Pro Aggregation switch. The UniFi switch is a configurable 10G Layer-3 switch. It offers 28 10G SFP+ fiber links to your devices and 4 25G SFP28 fiber uplink options to your enterprise network. Features a 1.3" touch LCM. The LCM provides current switch states and the necessary information you need for quick diagnosis. Managed and configured by the UniFi Controller with UniFi Mobile app support, the UniFi Switch offers an extensive suite of advanced Layer-3 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port, Inter-VLAN routing, static routing, and DHCP server. The UniFi Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere..Rack mountable configurable 10G fiber Layer-3 switch.Offers 28 10G SFP+ fiber links to your devices and four 25G SFP28 fiber uplink options to your enterprise network.Managed and configured by the UniFi Controller with UniFi Mobile app support.Offers 380Gbps of total non-blocking throughput, 760Gbps switching capacity, and 565.44Mpps forwarding rate.Dimensions: 1.7"H x 17.4"W x 12.8"D.Max power consumption: 100W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Features 1.3" touch screen with AR switch management.Provides an extensive suite of advanced Layer-3 switching protocols and features, including operation mode (switching, mirroring, or aggregate) per port, Inter-VLAN routing, static routing, and DHCP server.Made of SGCC steel and comes in silver.2-year manufacturer limited warranty
UniFi Aggregation Switch is a managed Layer 2 switch with eight 10G SFP+ ports. Featuring a compact 4.7" depth and fanless design, it supports high-bandwidth links to provide link aggregation for higher capacity and increased availability..Managed switch contains 8 x 10G SFP+ ports.Rack-mountable with mounting hardware (included).Supports up to 80Gbps of total non-blocking throughput, 160Gbps of switching capacity, and 119.04Mpps of forwarding rate.Maximum power consumption: 30W.Meets or exceeds the CE, FCC, and IC standards.Offers silent fanless cooling operation.Features a 1.3" touch-screen LCM display.Supported voltage range: 100-240VAC.36W AC-powered (power adapter is included).1-year manufacturer limited warranty
Cisco Catalyst 9500 Series switches based on Cisco Unified Access Data Plane (UADP) Application-Specific Integrated Circuit (ASIC) are Cisco's lead fixed enterprise core and aggregation switching platform and as part of the Catalyst 9000 family, are built to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place..Layer 3 managed switch with 48 x 25Gbps Ethernet and 4 x uplink SFP28 ports.1/10/25G Gigabit Ethernet line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Compatible with SNMP v2 technologies.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use Network Essentials with NW Advantage package license.Platinum-rated (greater than 90% efficient) AC and/or DC power supplies.Support Cisco StackWise Virtual technology that increases operational efficiency and boosts nonstop communications and scaled system bandwidth, while multichassis EtherChannel function allows configured across StackWise-Virtual members for high resiliency.Cisco IOSXE operating system for the enterprise provides support for model-driven programmability, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes.Scalable Layer 3 routing (IPv4, IPv6, and multicast) tables and Layer 2 switching tables.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy, making it suitable for distribution and synchronization of time and frequency over the network.Equipped with field-replaceable fan-tray units.Lifetime manufacturer limited warranty.Cisco Catalyst 9500 Series 48-Port Multi-Gigabit Ethernet Layer 3 Managed Switch
The Ubiquiti Switch Enterprise has a 124 Gb/s with 62 Gb/s non-blocking throughput and a 92.25 Mpps forwarding rate for smooth data transfers..(12) 2.5 GbE, (12) GbE; all PoE+ ports.(2) 10G SFP+ ports.400W total PoE availability.DC power backup-ready.Layer 3 switching.Remote firmware upgrade.Manage your networks from a single control panel
Cisco Catalyst 9500 Series switches based on Cisco Unified Access Data Plane (UADP) Application-Specific Integrated Circuit (ASIC) are Cisco's lead fixed enterprise core and aggregation switching platform and as part of the Catalyst 9000 family, are built to transform your network to handle a hybrid world where the workplace is anywhere, endpoints could be anything, and applications are hosted all over the place..Layer 3 managed switch with 24 x 25Gbps Ethernet and 4 x uplink SFP28 ports.1/10/25G Gigabit Ethernet line rate fabric ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Compatible with SNMP v2 technologies.Supports quality of service (QoS) for traffic prioritization.Flexible management via easy-to-use Network Essentials with NW Advantage package license.Platinum-rated (greater than 90% efficient) AC and/or DC power supplies.Support Cisco StackWise Virtual technology that increases operational efficiency and boosts nonstop communications and scaled system bandwidth, while multichassis EtherChannel function allows configured across StackWise-Virtual members for high resiliency.Cisco IOSXE operating system for the enterprise provides support for model-driven programmability, on-box Python scripting, streaming telemetry, container-based application hosting, and patching for critical bug fixes.Scalable Layer 3 routing (IPv4, IPv6, and multicast) tables and Layer 2 switching tables.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy, making it suitable for distribution and synchronization of time and frequency over the network.Equipped with field-replaceable fan-tray units.Lifetime manufacturer limited warranty.Cisco Catalyst 9500 Series 24-Port Multi-Gigabit Ethernet Layer 3 Managed Switch, 2Tbps
Aruba Instant On 1960 Switch Series includes four 10GbE connections to connect to servers, network storage devices, or to other switches. Each switch has a pull-out tag, known as a luggage tag, on the front panel of the switch. The tag includes a QR code that includes switch ID information (SKU number, SKU name, serial number, and MAC address) for easy switch onboarding through Instant On mobile app. The Aruba Instant On mobile app and cloud-based web portal make cloud-managed stacking easy — just follow the recommendations to stack up to four Aruba Instant On 1960 switches and manage as a single entity. The Aruba Instant On mobile app automatically detects members, making multiple stack members easy to setup and manage remotely. Automated configurations and streamlined workflows allow users to manage all stack members through one single dashboard without the need for device reboot. The Aruba Instant On 1960 Switch Series lets you use VLANs and Access Control Lists to set bounds on what data can be seen by which users. Leverage 802.1X with a RADIUS server to ensure only known and authorized users can access your network. Supports Automatic denial-of-service (DOS) monitors and protects the network against malicious attacks..Advanced 10G, smart-managed stackable switch designed for business networks and workgroups needing ultra-high performance..This model has 12 x RJ45 100/1000/10GBASE-T, 4 x SFP+ 10GbE ports.Use the Instant On mobile app, cloud-based web portal or the local web GU to quickly setup, monitor and manage the device.Throughput: 238 Mpps maximum; switching capacity: 320Gbps.Dimensions: 1.73"H x 17.42"W x 13.8"D.Power consumption at 100-127V: 130W maximum, 60W idle.Powered by single core ARMv7 Cortex-A9 2Ghz CPU.Lifetime manufacturer limited warranty
The SonicWall switch delivers highspeed network switching while providing unparalleled performance and manageability. Its unified security posture, high port density, Power over Ethernet (PoE) options and multigigabit performance capabilities makes it perfect for small and medium-sized business (SMB), and Software-Defined Branch (SD-Branch) deployments. This enables businesses – big or small, to undergo digital transformation and keep pace with the changing network and security landscape. The SonicWall Secure SD-Branch solution transforms user experience at branch office locations by delivering a unified platform that enables branches to be deployed in minutes and delivers unified visibility and threat detection from a single pane of glass. SonicWall SDBranch components consist of SonicWall next-generation firewalls with Secure SD-WAN, Capture Security Center with Zero-Touch Deployment, SonicWall Switches, SonicWave access points (AP), Capture Client and Cloud App Security. With the flexibility that SonicWall Secure SD-Branch offers, organizations can now be more agile, open and cloud-centric..Gigabit Ethernet managed switch contains 48 x RJ45 LAN and 4 x SFP+ ports.Power over Ethernet (PoE) options and multi-gigabit performance capabilities make it perfect for small- and medium-size businesses.Provides up to 176Gbps of switching capacity.Rack-mountable for convenient use.Supports SNMP v1/v2c/v3.Prioritize certain traffic on the network such as VOIP for video conferences while working from home, with features such as QoS.Offers Zero-Touch Deployment capability with the ability to quickly roll out devices across branches spread out globally; admins can quickly and securely deploy these switches at new locations without requiring any costly on-site IT personnel.Power consumption: 530W.Meets or exceeds FCC Class A, ICES Class A, CE (EMC Class A, LVD, RoHS), C-Tick, VCCI Class A, UL cUL, TUV/ GS, CB, Mexico UL DGN notification, WEEE, REACH, BSMI, KCC/MSIP, ANATEL standards.The Ethernet ports provide PoE options to power on various devices such as APs, VOIP phones and IP cameras.10 Gigabit connectivity attains significant boost in overall switching performance as network demands grow
A 48-port, Layer 3 Etherlighting™ switch with 2.5 GbE and PoE++ output..48-port, Layer 3 Etherlighting switch with 2.5 GbE and PoE++ output.Supports Power over Ethernet.Offers 166.66Mpps forwarding rate, 224Gbps switching capacity, and 112Gbps total non-blocking throughput.Rack-mountable.Managed with UniFi Network 8.0.24 and later.Maximum power consumption: 100W (excluding PoE output).Contains 16 2.5 GbE ports including eight PoE+ and eight PoE++, 32 GbE ports including 24 PoE+ and eight PoE++, four 10G SFP+ ports.Etherlighting ports that illuminate to indicate port location, speed/link, and native VLAN/network.1.3" touch-screen LCM display for convenient use.Provides 720W total PoE availability.DC power backup ready.Meets or exceeds CE, FCC, IC standards
The HPE Networking Instant On 1960 Switch (S0F35A#ABA) is a powerful, smart-managed switch designed for small to medium-sized businesses that need high-performance network solutions. Offering 12 ports, including 8 x 1GbE ports with PoE (Power over Ethernet) and 4 x 2.5GbE ports, this switch provides seamless connectivity for devices with varying speed requirements. The HPE 1960 series supports advanced features such as VLAN, QoS (Quality of Service), LACP (Link Aggregation Control Protocol), and network segmentation, enabling optimal network performance and security. With its 10GbE uplink ports and stackable capabilities, the Instant On 1960 Switch offers flexibility and scalability for growing network infrastructures. It is equipped with a robust PoE budget of 480W, making it suitable for powering PoE-enabled devices like IP cameras, access points, and phones. Additionally, it supports a variety of security features, including access control lists (ACLs), DHCP snooping, and 802.1X authentication, ensuring a secure and resilient network. This switch is designed for easy management, featuring a cloud-based management portal, mobile app support, and a user-friendly web GUI. It is optimized for energy efficiency, offering features like Energy Efficient Ethernet (EEE) to help reduce power consumption. With a compact, rack-mountable design, the HPE Instant On 1960 Switch is an excellent choice for businesses looking to build a high-performance, reliable network infrastructure..Features a total of 12 Ethernet ports, including 8 x 1GbE ports and 4 x 2.5GbE ports. It operates under a Gigabit Ethernet performance class and is a Smart Managed Switch, offering advanced management features for businesses..This switch supports PoE (Power over Ethernet), providing up to 480W PoE budget, making it ideal for powering devices such as IP cameras, access points, and phones directly through the network cables..Switch supports high-speed data transfer rates, including 10GbE uplink ports and 2.5GbE ports, ensuring fast and efficient data transmission across devices..The HPE Instant On 1960 switch comes with a rack-mountable form factor, allowing for easy integration into server racks or network equipment rooms..The HPE Instant On 1960 switch does not feature built-in wireless connectivity, as it is a wired Ethernet switch..The switch supports SNMP v1, v2, v3, allowing for advanced network monitoring and management through the Simple Network Management Protocol, making it suitable for complex network environments..Quality of Service (QoS) capabilities are included, enabling users to prioritize network traffic for specific applications or devices, ensuring optimal performance for high-priority network tasks..This switch includes robust system management features, such as a cloud-based management portal, a web GUI, and mobile app support. For security, it supports 802.1X authentication, DHCP snooping, and access control lists (ACLs), ensuring a secure network environment..Designed for high throughput, with support for up to 10GbE uplink ports. It operates in various modes, including VLAN, LACP, and network segmentation, for optimized data flow..This switch is equipped with Energy Efficient Ethernet (EEE) technology to reduce power consumption, making it an energy-efficient option for businesses, while still offering robust performance..The HPE Instant On 1960 switch complies with various industry standards and certifications. It supports IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, and other networking protocols.
The Netgear brings the first Unmanaged Multi-Gigabit PoE++ switch MS108UP with 60W per port Ultra60 PoE++ technology, great for powerful PoE++ installations with PoE budgets up to 230W, a compact size, plug-and-play installation, and reliable performance at affordable prices. The new model MS108UP supports 2.5 Gigabit speed connectivity and Power-Over-Ethernet (PoE), providing up to 60W/port. The new switch model can power devices such as VoIP phones, surveillance IP cameras, wireless access points, and many other applications. This new Unmanaged switch provides PoE Auto-Balance to help automatically balance the PoE power based on the device needs independent of PoE class detected. With the growing deployment of applications and an all-in-one solution, providing multi-speed and high power to these applications would be perfect..8 x multi-gigabit Ethernet ports provide up to 2.5Gbps of dedicated, non-blocking bandwidth each.4 x Ultra60 PoE++ and 4 x PoE+ ports provide a total of 230W of power, so you can power and connect your devices with a single wire.40Gbps (10/100/1000Mbps) line-rate fabric ensures congestion-free connectivity with your devices.Install your switch on your desktop or mount it to your wall with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Eight ports of multi-gigabit 1G/2.5G speeds to connect devices instantly and give them each exactly the speed they need: 1G or 2.5G automatically.Unique PoE Auto-Balance technology automatically balances the PoE power based on the device's needs independent of PoE class detected.Non-blocking switching architecture for maximum throughput at wire speed.Fanless design makes this switch perfect for noise-sensitive environments.Easy monitoring through per-port LEDs for port activity and speed.Simple, yet useful network set-up on top of plug-and-play connectivity.Lifetime 24/7 chat technical support.Lifetime manufacturer limited warranty