16 Port Gigabit Switch
29 results
The Allied Telesis™ AT-GS910/16-10 Gigabit unmanaged switch provides a simple solution to integrate 10, 100 and 100 Mbps devices to your existing network through its twisted-pair ports. It has 16 number of 10/100/1000Base-TX twisted-pair ports on the front panel for easy connection. The switch has an internal power supply with a single AC power supply socket on the rare panel. The eco-friendly feature automatically saves power consumption on each port, when the port is not connected. This switch mounts on desktop, wall or in a 19" equipment rack..Gigabit unmanaged switch has an internal power supply with a single AC power supply socket on the rare panel.Dimensions: 1.5"H x 10.4"W x 7"D.Compatibility: PC.Comes in gray color.Switching capacity: 32 Gbps.Interfaces/ports: 16 x RJ-45.Network and communication: 1000Base-T, Gigabit Ethernet.Power: 100 to 240 VAC, 50/60 Hz, 12 W, 0.3 A.Form factor: Desktop.Memory: 524KB flash, 524KB RAM.Jumbo frame support: 10KB, MAC address table size: 8K entries.Features flow control, loop guard, BPDU/EAP pass-through, full duplex flow control, auto-MDI/MDI-X on TX ports.Meets ICES Class A, UL60950-1, 2nd edition, CSA C22.2 No.60950-1-07, 2nd edition, IEC60950-1 (UL-EU, UL-CB), CE standards.Weight: 3.3 lbs.
Allied Telesis™ Managed WebSmart gigabit ethernet switch features 10/100/1000Base-T network technology. Switch has web-based management protocol and supports 2 layer communication..Ethernet technology: Gigabit Ethernet, Network technology: 10/100/1000Base-T, Media type supported: Twisted pair.Interfaces/ports: 16 x RJ-45.Dimensions: 1.7"(H) x 13.9"(W) x 8.5"(D).Form factor: Wall-mountable, rack-mountable.Management protocols: Web-based management, port-based VLAN, 802.1p QoS, port trunking/link aggregation, port mirroring, priority queue's, spanning tree, statistics & diagnostics.Layer supported: 2.Expansion slots: 2, Expansion slot details: 16 x Gigabit Ethernet network, 2 x Fast Ethernet expansion slot.Temperature: 32 - 104 deg F, Humidity: 5 - 90%, Voltage: 110 - 220 VAC input.Includes: AT-GS950/16 16 port Gigabit webSmart switch, wall & 19" rack-mount brackets, U.S. power cord.Certifications: IEEE 802.3x, UL 1950, FCC/EN55022 Class A, VCCI-Class A, C-Tick, EN60950 (TUV), EN55024, CE.Weight: 5.25 lbs..Warranty: Lifetime limited.Allied Telesis™ Managed WebSmart gigabit ethernet switch has 16 interface ports and is rack-mountable.
Slice seconds or even minutes off your employees' daily activities by relying on the fast speed of this TRENDnet gigabit GREENnet 16-port switch for your company's uploads and downloads. Connect everything from computers and intercom systems to security cameras and alarms to this dependable switch for a safe, steady connection. This switch utilizes sixteen Gigabit Ethernet ports that are also Auto-Negotiation, Auto-MDIX. With Auto-Negotiation, the switch will figure out the appropriate speed to transfer data and the appropriate mode (full or half duplex) depending on what is supported by the device connected to your switch..Number of Ethernet Ports 16, Performance Class & Network Management Type 2 Layer Supported.15 x RJ-45.10/100/1000Base-T.Sturdy metal desktop switch with built in power supply.32Gbps forwarding capacity.Manufacturer's Limited Lifetime Warranty.Operating temperature: 32 - 104 deg F.Store-and-Forward switching architecture with non-blocking wire-speed performance.IEEE 802.3x flow control for full-duplex mode.Back pressure flow control for half-duplex mode.Operates and maximizes packet filtering and forwarding rate.Protocol / topology: CSMA/CD, star.Sturdy metal housing.Jumbo frames: Up to 9216 bytes.Internal Power Supply Reduces Clutter.Certificates: WEEE.TRENDnet Gigabit GREENnet 16-Port Switch - Affordable and Practical
The Cisco Catalyst 9500 series switches are the next generation of enterprise-class core and aggregation layer switches, supporting full programmability and serviceability. Based on an x86 CPU, the Cisco Catalyst 9500 series is Cisco's lead purpose-built fixed core and aggregation enterprise switching platform, built for security, IoT, and cloud. The switches come with a 4-core x86, 2.4-GHz CPU, 16-GB DDR4 memory, and 16-GB internal storage. The Cisco Catalyst 9500 series is the industry's first purpose-built 25, 40 and 100 Gigabit Ethernet line of switches targeted for the enterprise campus. These switches deliver unmatched table scale (MAC/route/ACL) and buffering for enterprise applications. The Cisco Catalyst 9500 series includes nonblocking 40 and 100 Gigabit Ethernet Quad Small Form-Factor Pluggable (QSFP+, QSFP28) and 1, 10 and 25 Gigabit Ethernet Small Form-Factor Pluggable Plus (SFP/SFP+/SFP28) switches with granular port densities that fit diverse campus needs. The switches support advanced routing and infrastructure services (such as Multiprotocol Label Switching (MPLS) Layer 2 and Layer 3 VPNs, Multicast VPN (MVPN), and Network Address Translation (NAT); Cisco Software-Defined Access capabilities (such as a host tracking database, cross-domain connectivity, and VPN Routing and Forwarding (VRF)-aware Locator/ID Separation Protocol (LISP); and network system virtualization with Cisco StackWise virtual technology that are critical for their placement in the campus core. The Cisco Catalyst 9500 Series also supports foundational high-availability capabilities such as patching, Cisco Nonstop Forwarding with Stateful Switchover (NSF/SSO), redundant platinum-rated power supplies, and fans..Rack-mountable switch is the next generation of enterprise-class core and aggregation layer switches, supporting full programmability and serviceability.Contains 16-port 1/10 Gigabit Ethernet switch with SFP/SFP+.Programmable architecture frees your IT staff from time-consuming, repetitive network configuration tasks, so they can focus instead on innovation that positively transforms your business.Up to 6.4Tbps switching capacity with up to 2Bpps of forwarding performance.Dimensions: 1.73"H x 21.52"W x 17.5"D.Features 16GB DRAM, 16GB flash memory, quad-core x86, 2.4GHz CPU.Up to 512000 Flexible NetFlow (FNF) entries in hardware.Up to 212000 routing entries (IPv4/IPv6) for high-end campus core and aggregation deployments.IPv6 support in hardware, providing wire-rate forwarding for IPv6 networks.IEEE 802.1ba AV Bridging (AVB) built-in to provide a better AV experience through improved time synchronization and QoS.Precision Time Protocol (PTP; IEEE 1588v2) provides accurate clock synchronization with sub-microsecond accuracy, making it suitable for distribution and synchronization of time and frequency over the network.Support for both static and dynamic NAT and Port Address Translation (PAT).Scalable routing (IPv4, IPv6, and multicast) tables and Layer 2 tables.Support for AES-256 with the powerful MACsec 256-bit encryption algorithm available on all models.Meets or exceeds UL 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950-1, GB4943 standards.Lifetime manufacturer limited warranty
The DGS-1100 Series is a range of switches designed to meet the requirements of small, medium, and enterprise businesses. Support for multiple PoE standards make the DGS-1100 Series ideal for IP surveillance deployments. Advanced management features, a range of diagnostic and troubleshooting tools, and energy efficient technologies provide a flexible solution to meet your networking requirements..Number of Ethernet Ports 16, Network Management Type Managed.Network Technology: 10/100/1000Base-T.Ethernet Technology: Gigabit Ethernet.Switch Form Factor: Rack-mountable, Desktop.Wireless Connectivity: Not Applicable.Power Source: Power Supply.Media Type Supported: Twisted Pair.Limited Lifetime Warranty
The Tenda TEG1016D is a high-performance unmanaged Gigabit Ethernet switch designed for small to medium-sized businesses, community networks, and industrial applications. With 16 auto-negotiating 10/100/1000 Mbps RJ45 ports, it provides robust and reliable network connectivity to handle bandwidth-intensive tasks, including large file transfers and stable video streaming. The switch boasts a switching capacity of 32 Gbps, ensuring seamless data transmission across all connected devices, and supports jumbo frames up to 9 KB, making it suitable for applications that require high throughput. The device includes an 8K MAC address table, enhancing its capability to manage multiple network devices simultaneously. Housed in a durable 13-inch metal casing, the TEG1016D offers versatile mounting options for desktop, wall, or rack installation, ensuring it fits various environments. It is fanless for silent operation, making it ideal for noise-sensitive settings. Furthermore, its 6 kV lightning protection shields both ports and the power supply from electrical surges, providing stability and durability even in harsh environments. With plug-and-play functionality, no technical configuration is needed, simplifying installation for users. Designed with low power consumption (≤10W) and advanced cooling, it is energy-efficient while maintaining reliable performance. The TEG1016D adheres to industry standards like IEEE 802.3, 802.3u, and 802.3ab, ensuring compatibility with a wide range of network devices. Whether used in an office, factory, or residential setting, the TEG1016D delivers stable, high-speed network connectivity with minimal maintenance, making it a cost-effective solution for enhancing your network infrastructure..Equipped with 16 auto-negotiating 10/100/1000 Mbps Gigabit Ethernet ports, the TEG1016D is a high-performance, unmanaged switch designed for small to medium-sized networks..The TEG1016D does not support Power over Ethernet (PoE), making it ideal for applications that do not require powered devices..Offers a maximum data transfer rate of 1 Gbps per port and a total switching capacity of 32 Gbps for fast and efficient communication..Designed with a compact and durable 13-inch metal casing, it supports desktop, wall, and rack mounting for flexible installation..This model does not include wireless connectivity and is dedicated to wired Ethernet connections for stable and high-speed networking..The TEG1016D does not include SNMP (Simple Network Management Protocol) support, as it is a fully unmanaged switch..Supports basic Quality of Service (QoS) features through IEEE 802.1p prioritization, ensuring smooth traffic handling for critical applications..Features plug-and-play functionality with no configuration required and includes 6 kV lightning protection to safeguard against electrical surges..Delivers a packet forwarding rate of 23.8 Mpps with full-duplex support, optimizing throughput for bandwidth-intensive operations..Operates with low power consumption, using ≤10W under full load, and employs a fanless design for silent and energy-efficient performance..Certified for CE, FCC, and RoHS standards, the TEG1016D adheres to international safety and environmental guidelines while supporting IEEE 802.3, 802.3u, 802.3ab, and 802.3x protocols.
Enjoy high speed, reliability, and flexibility by expanding your business's network capacity with the M4300-8X8F 16-Port RJ45/SFP+ 10G Managed Network Switch from Netgear. Pre-configured for AV-over-IP, this fully managed switch includes Layer 2, 3, and 4 feature sets, such as hot-swappable mixed stacking, with up to eight switches in a single logical switch. However, there are no license requirements to support video broadcast and other high-bandwidth applications. The M4300-8X8F features sixteen 10G ports, comprised of eight RJ45 copper wire connectors and eight SFP+ fiber optic transceiver slots. This switch is designed to smoothly transfer data with a 320 Gb/s switching capacity and 238 Mpps forwarding rate. Your data is secured by features such as access control, private VLANs, and denial of service (DoS) attack protection. The half-width design allows you to install two switches into the same rackmount space for redundancy. A modular 250W power supply is included..16 Ethernet ports, is classified as a High-Performance switch, and offers Managed network management..Switch supports ultra-fast connectivity with a 10Gbps data transfer rate on each port, ensuring high-speed performance for demanding networks..Compact half-width design and 1RU rack-mountable form factor, allowing flexible installation in space-constrained environments..Full SNMP support (v1, v2c, and v3) for comprehensive network monitoring and centralized management..Equipped with advanced Quality of Service capabilities, including DiffServ, Auto-VoIP, and Auto-iSCSI prioritization, to optimize traffic for voice and storage applications..robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Robust management options via CLI and Web GUI, along with security features like ACLs, DHCP Snooping, IP Source Guard, and DoS protection for network integrity..Delivers 320Gbps switching capacity and supports Layer 2, Layer 3, and Layer 4 operational modes, ensuring scalability and flexibility for enterprise networks..Operates with up to 250W power draw and intelligent fan control, promoting energy efficiency and reduced operational costs..IEEE 802.3 standards and OpenFlow 1.3, making it SDN-ready and suitable for modern networking environments..Authentication method: RADIUS, TACACS+.Form factor: Rack mountable
Netgear 300 Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Managed switch delivers essential business networking features and powers PoE+ devices such as VoIP phones, IP cameras, and more.Contains 16 x 10/100/1000 RJ45 copper ports (auto uplink).Business-friendly and easy-to-use web browser-based management GUI.Dimensions: 1.06"H x 11.26"W x 4.02"D.Certifications and standards: Meets or exceeds CE mark, FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Fanless design for silent operation makes this switch perfect for noise-sensitive environments.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.16 ports provide up to 1000Mbps of dedicated, non-blocking bandwidth each.10Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.15 PoE+ ports provide a total of 180W of power so you can power and connect your devices with a single wire.Manage PoE prioritization, PoE power limit per port, PoE scheduling, and more for simple control over all PoE-powered devices.Simple, yet useful network set-up on top of plug-and-play connectivity.Quality of Service (QoS) for traffic prioritization.Port mirroring for network monitoring.Rate limiting for better bandwidth allocation.Features auto "denial-of-service" (DoS) prevention, troubleshoot connection issues via cable test, loop prevention, loop detection, broadcast storm controls.5-year manufacturer limited warranty
Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit PoE-Compliant Managed Network Switch with SFP.No. & Type of Ports: 16-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 7.9 x 1.7".Power Consumption: 130 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.
Netgear 300 Plus switches with PoE meets business networks growing need by providing fundamental network features such as simplified VLANs, QoS set-up and IGMP Snooping that will help optimize the performance of business networks. Plus switches are the perfect upgrade from the plug-and-play unmanaged switch, delivering essential networking features at a very affordable price. These models support Power-Over-Ethernet (PoE) and can power devices such as VOIP phones, surveillance IP cameras, wireless access points and many other applications. These new PoE+ Gigabit Ethernet Plus switches models include uninterruptable PoE to help optimize the performance and troubleshooting of business networks. The new and improved business-friendly GUI allows easy management and simple configuration. With the growing deployment of applications and an all-in-one solution, providing management and power to these applications would be perfect..Managed switch delivers essential business networking features and powers PoE+ devices such as VoIP phones, IP cameras, and more.Contains 16 x 10/100/1000 RJ45 copper ports (auto uplink).Business-friendly and easy-to-use web browser-based management GUI.Dimensions: 1.06"H x 11.26"W x 4.02"D.Certifications and standards: Meets or exceeds CE mark, FCC Part 15 class B, CE/EN55032/24, VCCI, ACMA, CSA safety, KC, BSMI standards.Fanless design for silent operation makes this switch perfect for noise-sensitive environments.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.16 ports provide up to 1000Mbps of dedicated, non-blocking bandwidth each.10Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.15 PoE+ ports provide a total of 231W of power so you can power and connect your devices with a single wire.Manage PoE prioritization, PoE power limit per port, PoE scheduling, and more for simple control over all PoE-powered devices.Simple, yet useful network set-up on top of plug-and-play connectivity.Quality of Service (QoS) for traffic prioritization.Port mirroring for network monitoring.Rate limiting for better bandwidth allocation.Features auto "denial-of-service" (DoS) prevention, troubleshoot connection issues via cable test, loop prevention, loop detection, broadcast storm controls.5-year manufacturer limited warranty
Reliability, security, and affordability continue to be priorities, while ongoing management and operations add additional complexity that takes time and resources..Type of Ethernet Switch: Gigabit Managed Network Switch with SFP.No. & Type of Ports: 16-Port.System Management: Managed.Rack-Mountable Design.Dimensions (W x D x H): 17.3 x 8 x 1.7".Power Consumption: 11.4 W.Standards & Certifications: WEEE.Design as applicable: Rack-Mountable Design.3 Year Warranty.From connectivity to cloud applications, networking plays a crucial role in every business journey.
Netgear 16 PoE+ ports with 115W power budget. Unmanaged 300-Series PoE Switches are easy, reliable, and affordable network connectivity for home and small offices. Providing power and data from a single Ethernet cable..Gigabit Ethernet unmanaged switch.16 Gigabit Ethernet ports.Unmanaged switch provides affordable network connectivity.Dimensions: 1.1"H x 11.3"W x 4"D.16 PoE+ ports with 115W total power budget to power wireless AP, IP cameras, IP phones, and much more.Metal case is durable and robust.Supports desktop and wall placement, includes wall mount kit in the box.Fanless design minimizes noise pollution, making the switch ideal for noise-sensitive environments.3-year manufacturer limited warranty
Introducing the NETGEAR GS116LP 16-Port Gigabit Ethernet Unmanaged Switch with 76W PoE budget. The Industry's first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116LP the ideal cost-effective and future-proof solution for any home or business environment..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 76W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.
Introducing the NETGEAR GS116LP 16-Port Gigabit Ethernet Unmanaged Switch with 76W PoE budget. The Industry's first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116LP the ideal cost-effective and future-proof solution for any home or business environment..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 76W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.
The Aruba Instant On 1430 Switch Series is a plug-and-play unmanaged switch series for small businesses looking for simple, reliable, and low-cost network connectivity. These easy-to-use switches deliver Layer 2 Gigabit Ethernet switching capabilities — at an affordable price point — to help connect and share common resources like printers and access points, without any complicated network configuration. With plug-and-play operation, fully automated functions, zero ongoing maintenance, and Power over Ethernet (PoE) models, these switches deliver simple, reliable connectivity for the smallest SMBs and home offices..Gigabit Ethernet unmanaged switch features 16 RJ-45 autosensing 10/100/1000 Class 4 PoE ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T).PoE to power APs and IoT devices such as IP phones, surveillance cameras, and door locks.Switching capacity: up to 32Gbps.Comes in a rack-mountable design; also can be hung on a wall or placed on a desk.Quality of Service (QoS) and flow control for improved network efficiency.Throughput capacity: up to 23.8Mpps.Plug-and-play with fully automated functions and zero ongoing maintenance.Provides a flow-throttling mechanism propagated through the network to prevent packet loss at a congested node.Lifetime manufacturer limited warranty
The Aruba 2930F switch series is designed for customers creating smart digital workplaces that are optimized for mobile users with an integrated wired and wireless approach. This convenient Layer 3 network switch includes built-in uplinks and PoE power and is simple to deploy and manage with advanced security and network management tools like Aruba ClearPass policy manager, Aruba AirWave, and cloud-based Aruba Central. This switch provides a convenient and cost-effective access switch solution that can be quickly set up with zero touch provisioning. The robust Layer 3 feature set includes a limited lifetime warranty..Fanless 12-port Gigabit Ethernet managed switch provides performance and ease of use for enterprise campuses, SMBs, and branch offices.Features 12 x RJ45 auto-sensing 10/100/1000 PoE+ ports, 2 x RJ45 auto-sensing 10/100/1000 ports, 2 x SFP+ 1/10GbE ports, and a dual-personality RJ45 serial console port.Switching capacity: 68Gbps.Comes in a 1U rack-mountable design.Power rating: 170W (maximum), 20W (idle).Supports advanced security and network management via Aruba ClearPass policy manager, Aruba AirWave, and Aruba Central.Throughput: up to 41.7Mpps.Maximum power consumption: 170 W (139W PoE+ power).Meets or exceeds the DoE VI, UL/CUL, and FCC CFR 47 Part 15 Class A standards.MAC address table size: 32768 entries.Packet buffer size: 12.38MB.Features a dual-core ARM Cortex A9 1016MHz CPU, 1GB DDR3 SDRAM, and 4GB eMMC memory.Lifetime manufacturer limited warranty
The Netgear 16-port high-power PoE+ Gigabit Ethernet unmanaged switch joins the Netgear unmanaged switch family, adding full 16 ports support for flexible deployment of modern high-power PoE devices. Companies can now deploy denser PoE+ devices connected to a single switch instead of multiples with a total PoE power budget of 260W. The quiet design makes it perfect for any home or business environment..16-port high-power PoE+ Gigabit Ethernet unmanaged switch adds full 16 ports support for flexible deployment of modern high-power PoE devices.Contains 16 auto-sensing 10/100/1000Mbps Gigabit Ethernet ports with up to 32 non-blocking switching.Dimensions: 1.7"H x 12.99"W x 8.15"D.Energy-efficient technology for power savings.Certifications and standards: Meets or exceeds FCC 47 CFR Part15B (Class A), ICES-003 Class A, EN 5024/55032/55035 (Class A), AS/NZS CISPR 32, VCCI, BSMI CNS13438, KCC, UL standards.Auto MDI/MDIX eliminates the need for crossover cables.Small, sturdy desktop metal case and quiet operation.High-power PoE with impressive PoE budgets for all types of PoE installations.Simple setup with no software or configuration needed.Per-port LEDs for port activity and speed.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Non-blocking switching architecture for maximum throughput at wire speed.Standards-based technology ensures interoperability with any standards-based devices in the existing network.Power up to 30W per device.5-year manufacturer limited warranty
TRENDnet's 18-Port Gigabit High Power PoE+ switch, model TPE-TG182F, reduces equipment and installation costs by delivering data and power over existing Ethernet cables. This rack mountable, high-power PoE switch provides 16 gigabit PoE+ ports with a total PoE power budget of 440W. It also features two additional shared RJ-45 or SFP gigabit ports. The TPE-TG182F high-power PoE switch supplies up to 30W of power per port for devices such as high-power wireless access points, PTZ (Pan/Tilt/Zoom) IP cameras, and VoIP phone systems..Gigabit High Power PoE+ switch reduces equipment and installation costs by delivering data and power over existing Ethernet cables.Includes 16 x Gigabit PoE+ ports, 2 x shared Gigabit ports (RJ45 or SFP).36Gbps switching capacity.Dimensions: 1.7"H x 17.4"W x 7.7"D.Power consumption: 18W (without PD); PoE budget: 440W.Certifications and standards: Meets or exceeds the CE, FCC, ETL standards.Sturdy 19" rack mountable metal housing with included mounting brackets.3-year manufacturer limited warranty
The Cisco Catalyst IE3300 rugged series ushers in mainstream adoption of Gigabit Ethernet connectivity in a compact, form-factor, modular switch that is purpose-built for a wide variety of extended enterprise and industrial applications..Managed switch expanded module contains 16 copper (RJ45) 100/1000Mbps ports.Provides secure access for the high-speed applications in the industrial space, and delivers high-speed up to 10 Gigabit Ethernet connectivity in a compact form factor.DIN rail-mountable.User-friendly WebUI allows for easy configuration and monitoring, and eliminates the need for more complex, terminal emulation programs.Power consumption: 12W.Great for extended enterprise deployments in outdoor spaces, warehouses, and distribution centers.Fanless, convection-cooled with no moving parts for extended durability.Alarm I/O for monitoring and signaling to external equipment.Delivers multiple rings and redundant ring topologies for new network configurations.Provides enhanced flow and threat visibility.Enables optimization of the network infrastructure, reduces operation costs, and improves capacity planning and security incident detection.5-year manufacturer limited warranty
Get networks up and running with Netgear plug-and-play unmanaged switches. PoE 183W power budget lets you dedicate power for network devices with a simple CAT-5 cable..16-port Gigabit Ethernet unmanaged PoE+ switch with high-power FlexPoE (183W).Dimensions: 1.1"H x 11.3"W x 4"D.Durable and rugged metal case in black.16 Gigabit Ethernet ports.Simple setup with no software to install or configuration needed and zero maintenance.Non-blocking switching architecture for maximum throughput at wire speed.Fanless design minimizes noise pollution, making the switch ideal for noise-sensitive environments.Supports desktop and wall placement.Ensure interoperability with any standards-based PDs
Introducing the NETGEAR GS116PP 16-Port Gigabit Ethernet Unmanaged Switch with 183W PoE budget . The Industry’s first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116PP the ideal cost-effective and future-proof solution for any home or business environment. A unique combination of features from Netgear makes this switch one of the most adaptive on the market..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 183W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.NETGEAR GS116PP is the industry’s first flexible PoE+ 16-Port Gigabit with a compact and fanless design.
Introducing the NETGEAR GS116PP 16-Port Gigabit Ethernet Unmanaged Switch with 183W PoE budget . The Industry’s first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power that they need with interchangeable external power supply and an intuitive power selector. The compact and fanless design makes the GS116PP the ideal cost-effective and future-proof solution for any home or business environment. A unique combination of features from Netgear makes this switch one of the most adaptive on the market..16-port gigabit unmanaged switch helps businesses cost-effectively increase power budget to expand their network.PoE+ ports provide a total of 183W of power, so you can power and connect your devices with a single wire.1Gbps data transfer rate per port.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceed the 47 CFR FCC Part 15, SubpartB, Class A; ICES-003:2016 Issue 6, Class A; ANSI C63.4:2014; 55032:2012+AC:2013, Class A; EN 55024:2010; EN 61000-3-2:2014, Class A; EN 61000-3-3:2013; AS/NZS CISPR 32:2015, Class A; VCCI-CISPR 32:2016, Class A; KN 35; CNS 13438; Electromagnetic Compliance Class A standards.Upgradable PoE budget with interchangeable power supplies.Small form factor and quiet operation.Plug-and-play automatic connectivity to your router or modem.PoE power per port: up to 15.4W for 802.3af and up to 30W for 802.3at.Lifetime manufacturer limited warranty.NETGEAR GS116PP is the industry’s first flexible PoE+ 16-Port Gigabit with a compact and fanless design.
The TRENDnet TEG-204WS 20-port Gigabit Ethernet rack mountable web smart switch in black, has fanless design and delivers advanced management features with a 40 Gbps switching capacity. It has 16 x Gigabit ports and 4 x shared Gigabit ports (RJ-45/SFP). This switch features local dial in user authentication, 802.1X Port-Based network access control, RADIUS and TACACS+ security systems. It is suitable for traffic control, troubleshooting, access controls and monitoring..Gigabit Ethernet web smart switch provides faster throughput.Ports: (16) Gigabit ports, (4) shared Gigabit ports (RJ-45/SFP).Management: HTTP/HTTPS (SSL v2/3 TLS) web based GUI, SNMP v1, v2c, v3, RMON v1, static unicast Mac address, security: Local dial in user.Dimensions: 1.7"H x 11"W x 7"D.Power consumption: 14.6 W (maximum).Certifications and standards: Meets CE, FCC and UL standards.Has fanless design.Input voltage: 100 to 240 VAC, 50/60 Hz, internal power supply.Form factor: 1U rack mountable, color: Black.Data transfer rate: 20 Mbps (full duplex) Ethernet, 200 Mbps (full duplex) Fast Ethernet, 2000 Mbps (full duplex) Gigabit Ethernet.RAM buffer: 512KB, Mac address table: 8K entries, jumbo frames: 10KB, forwarding rate: 29.8 Mpps (64 byte packet size).Layer supported: 2, media type supported: Twisted pair, optical fiber, network technology: 10/100/1000Base-T, 1000Base-X.Port mirror: RX, TX or both, one-to-one, protocols: IP protocol 0-255, TCP/UDP port 1-65535.Compatible with optional software utility Windows 10, 8.1, 8, 7, Vista, XP, Windows 2003/2008 server.Includes quick installation guide, CD-ROM (utility and users guide), 6' power cord and rack mount kit.Features IPv6, LACP, VLAN, QoS and IGMP snooping, private and voice VLAN support, metal housing and 802.3ad dynamic LACP.Weight: 3.88 lbs..Comes with 3 year warranty
The Aruba Instant On 1430 switch series is an unmanaged Layer 2 Gigabit Ethernet switch series ready to deploy in seven models in PoE and non-PoE configurations: one (1) 5-port, two (2) 8-port, two (2) 16-port, one (1) 24-port, and one (1) 26-port model with 2 SFP uplinks models. The Aruba Instant On 1430 switch series models are easy to use with zero configuration and no required ongoing administration. The unmanaged PoE models deliver fully automated support for powering compatible IP phones, video surveillance cameras, or wireless access points. The Aruba Instant On 1430 switch series supports Energy Efficient Ethernet (EEE) and is compliant with 802.3az standard requirements to save energy during periods of low data activity. All models are fanless for silent operation in office settings or acoustically sensitive environments and require less power to operate..Unmanaged layer 2 Gigabit Ethernet switch features 16 RJ-45 autosensing 10/100/1000 ports.Quality of Service provides priority of time-sensitive packets (like VoIP and video) over other traffic based on DSCP or IEEE 802.1p classification.Supports Energy Efficient Ethernet (EEE) and is compliant with 802.3az standard requirements to save energy during periods of low data activity.Throughput: 23.80Mpps maximum; switching capacity: 32Gbps.Power consumption: 7.9W maximum, 2.3W idle.Powered by a 128kB EEPROM processor and features a 2MB packet buffer size.Simplified cabling automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports using Auto MDI/MDI-X.Jumbo frame support provides up to 9216 bytes frame size to improve the performance of large data transfers.Fan-less design for silent deployment in office spaces.Flow control provides a flow-throttling mechanism propagated through the network to prevent packet loss at a congested node.Lifetime manufacturer limited warranty
Netgear brings even larger PoE budgets on unmanaged switches with Ultra60 PoE++ technology. 16-port switch is perfect for powerful PoE+/PoE++ installations with impressive PoE budget up to 380W, a compact size, plug-and-play installation, and reliable performance at affordable prices. This switch can support all types of PoE installation and features eight high-power Ultra60 PoE++ and eight PoE+ ports with a large budget to keep your devices always-ready..Unmanaged switch provides 16 ports with gigabit Ethernet connectivity to your devices.Eight high-power Ultra60 PoE++ and eight PoE+ ports provide a total of 380W of power.32Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the FCC 47 CFR Part15B (Class A), ICES-003 Class A, EN 55024/55032/55035 (Class A), AS/NZS CISPR 32, VCCI, BSMI CNS13438, KCC standards.Simple setup with no software or configuration needed.Per-port LEDs for port activity and speed.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Auto MDI/MDIX eliminates the need for crossover cables.Non-blocking switching architecture for maximum throughput at wire speed.Standards-based technology ensures interoperability with any standards-based devices in the existing network.802.3at Power Over Ethernet (PoE+) on all models for IP cameras, VoIP/Internet-based phones, wireless access points.Unique PoE technology automatically balances the PoE power based on the device needs, independent of PoE class detected.Enable pre-802.3bt devices using the proprietary PoE mode.Lifetime manufacturer limited warranty
Netgear brings even larger PoE budgets on unmanaged switches with Ultra60 PoE++ technology. 16-port switch is perfect for powerful PoE+/PoE++ installations with impressive PoE budget up to 380W, a compact size, plug-and-play installation, and reliable performance at affordable prices. This switch can support all types of PoE installation and features eight high-power Ultra60 PoE++ and eight PoE+ ports with a large budget to keep your devices always-ready..Unmanaged switch provides 16 ports with gigabit Ethernet connectivity to your devices.Eight high-power Ultra60 PoE++ and eight PoE+ ports provide a total of 380W of power.32Gbps (10/100/1000Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop or rack with the hardware provided in the box.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the FCC 47 CFR Part15B (Class A), ICES-003 Class A, EN 55024/55032/55035 (Class A), AS/NZS CISPR 32, VCCI, BSMI CNS13438, KCC standards.Simple setup with no software or configuration needed.Per-port LEDs for port activity and speed.Auto negotiation for automatic connection at the highest common speed between the switch and end device.Auto MDI/MDIX eliminates the need for crossover cables.Non-blocking switching architecture for maximum throughput at wire speed.Standards-based technology ensures interoperability with any standards-based devices in the existing network.802.3at Power Over Ethernet (PoE+) on all models for IP cameras, VoIP/Internet-based phones, wireless access points.Unique PoE technology automatically balances the PoE power based on the device needs, independent of PoE class detected.Enable pre-802.3bt devices using the proprietary PoE mode.Lifetime manufacturer limited warranty
The TP-LINK dedicated 16-port PoE+ switch is perfect for numerous applications. Compliance with the 802.3af/at PoE+ standard supports up to 30W on each PoE port. The total 250W PoE power budget for the 16 x gigabit PoE+ ports makes it suitable for a wide range of applications, from surveillance to networking in offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more..Unmanaged Ethernet switch featuring 16 x Gigabit PoE+ (RJ45), 2 x Gigabit non-PoE (RJ45) ports, and 2 x combo gigabit SFP slots.High PoE power budget with up to 30W for each PoE port and 250W for all PoE ports.Switching capacity: 36Gbps; packet forwarding rate 26.78Mpps.Comes in a 19" 1U rack-mountable form factor.Ensures smooth traffic for latency-sensitive applications that use voice and video by designating the priority of traffic based on quality of service (QoS).Max power consumption: 21.4W (no power device connected), 286.6W (with 250W power devices connected).Meets or exceeds the CE, FCC, RoHS standards.Intelligent power management automatically cuts lower-priority ports power to ensure high-priority ports power supply.Automatically detects the required PoE power for your device and protects your non-PoE equipment from being damaged.Fully compatible with PoE devices, such as IP cameras, access points, and IP phones.Plug-and-play with no configuration and installation needed.Durable metal casing and professional heat dissipation design ensure a wide operating temperature range.Package includes: switch, installation guide, power cord, rack mount kit, rubber feet.Lifetime manufacturer limited warranty
This switch is a next generation rack mount hardened switch with 80Gbps switching capacity. It provides (16) 10/100/1000 PoE+ ports, (4) 100/1000 dual speeds SFP ports and has (2) additional 1G/10G SFP+ slots..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 16x 10Gbps SFP+ ports (first 12 ports support 1Gbps) engineered for 1Gb AV over IP.320Gbps line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty