Multimode LC Fiber Cable

StarTech FIBLCLC3 3m Multimode 62.5/125 Duplex Fiber Patch Cable LC to LC.Can maximize wiring conduit usage while minimizing installation problems.Fiber optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high- speed data transmission.Cool/no heat so it doesn't destroy heat-sensitive papers.No warm-up or waiting, no odors.portable and compact for desktop operation, weighs only 8 1/2 lbs..Easy-to-use for goof-proof operation.Refills quickly with Scotch® refill cartridges.18-foot dual-laminate starter cartridge included.White.Max pouch thickness: Up to 9.2 mil.Throat width: 8 1/2".Laminating style: Cold.Perfect lamination without electricity.Safe, heat-free and easy to use, with no warm-up waiting time, no fumes and no mess.Ideal for posters, banners, artwork, signs, menus, maps and more.Fully compatible with inkjet, thermal and other sensitive papers.For documents up to 8 1/2" wide, 1/10" thick and 90-ft.long.Features easy-loading cartridge, adjustable input tray

This 2m LC/SC Duplex 50/125 Multimode Fiber Patch Cable provides a reliable connection between networking devices for high-speed long distance networks; tested/certified to be within acceptable optical insertion loss limits. Lifetime Warranty..Can maximize wiring conduit usage while minimizing installation problems.Fiber Optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high-speed data transmission.Backed by StarTech.com lifetime warranty.Connectors offer greater durability in resisting pulls, strains, and impacts during cable installation and maintentance.Immune to electricty interference.Attenuation loss meets or exceeds industry standards

AddOn 15m LOMM OM4 fiber optic male LC/LC duplex patch cable in aqua color features low-smoke zero-halogen jacket that protects from toxic and corrosive gases. Cable is recommended for connection between fiber patch panels, hubs and switches..LC Male.Suited for shorter reach data center LAN's or SAN's, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc.15m.40Gb Ethernet, multimedia, or communication applications, and provides extended bandwidth over OM3 cable.Connector on first end: 2 x LC male network.Connector on second end: 2 x LC male network.Fiber optic: Fiber optic, cable characteristic: Patch cable, fiber optic mode: Multi-mode, core/cladding diameter: 50/125 micro meter, device supported: Network device.Aqua.Device supported: Network device.High-quality LOMM (50/125) patch cable is specifically designed for 40Gb Ethernet, multimedia, or communication applications, and provides extended bandwidth over OM3 cable.High bandwidth provided by OM4 fiber provides extra headroom for channel insertion loss.100% RoHS compliant for all of your networking needs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.It is designed to enhance the system cost benefits enabled by 850 nm Vertical Cavity Surface Emitting Lasers for existing 1 and 10 Gb/s applications, as well as future 40 and 100 Gb/s systems. when used at less than rated distance environments.Warranty: Lifetime limited.AddOn 15m LOMM OM4 fiber optic male LC/LC duplex patch cable in aqua color offers backward compatibility with existing 50/125 equipment and provides the fire protection needed to run within walls.

AddOn® 13.12' Multi-mode fiber patch cable in aqua color is ideally designed for ethernet, multimedia or communication applications. Cable offers higher speeds, increased bandwidth and 10GB transfers up to 300 m utilizing an 850 nm VCSEL source..Cable type/connection type: Fiber optic.Patch cable is suited for LAN's or SAN's, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc.Cable length: 13.12'.Aqua.Connector on first end: 2 x LC male network, Connector on second end: 2 x LC male network.Core/cladding diameter: 50/125 um.Fiber optic mode: Multi-mode.Features: Halogen-free, laser-optimized multimode fiber (LOMMF).High quality LOMM (50/125) patch cable is specifically designed for ethernet, multimedia, or communication applications, and is intended for use with 10Gb applications.Low-smoke zero-halogen jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduit.Patch cables are 100% compliant for all of our networking needs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.Each cable is 100% optically tested for insertion loss before you take ownership.Provides 10 gigabit transfers up to 300 meters utilizing an 850nm VCSEL source.Optical multimode 4 (OM4) fiber supports 2000 MHz/km EMB at 850 nm.Warranty: Lifetime limited.AddOn® 4m fiber duplex LC/LC patch cable is specifically designed for ethernet, multimedia or communication applications and is intended for use with 10 Gb applications.

Make compatibility and setup the easy part. Belkin 3.3' Fiber Optic Multimode LC/LC Duplex Patch Cable, Aqua (F2F402LL-01M-G) with a 3.3 ft length (key specs: 3.3 ft). Use it for presentations, monitor hookups, or quick replacements to keep teams moving. Simple to integrate and dependable for daily use..3.3 ft length reaches from desk to display or rack without tight bends or strain.Features bus type of USB 2.0, Chipset ID of Prolific - PL-2303 with a serial interface having a port to deliver high-performance.Works well with system including PC with an available USB 1.1 (or above) port for ultimate performance.Great for standardizing conference rooms, desks, and IT closets with easy-to-swap replacements.Reliable signal and power you can count on (3.3 ft)—built for everyday office and IT setups.

The AddOn® 9.8' laser-optimized OM3 patch cable in aqua, has multi-mode fiber duplex two SC male connectors on first end and two LC male connectors on second end. With low smoke zero halogen jacket, this patch cable offers protection against toxic and corrosive gases in badly ventilated spaces. Featuring 50/125 OHMm core/cladding thickness, this patch cable ensures high performance. It is suitable for use with 10Gb Ethernet applications. The patch cable offers the fire protection needed to run within walls and air plenums, while eliminating the need for conduits..Patch cable for use with 10GB Ethernet applications and it is suited for LANs or SANs.Cable length: 9.8'.Multi-mode fiber (LOMM) duplex two SC male connectors on first end and two LC male connectors on second end.Jacket: Low smoke zero halogen (LSZH).Color: Aqua.Core/cladding: 50/125 OHMm, Standard: OM3.Jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduits.Offers higher speeds and increased bandwidth compared to conventional twisted-pair copper cable.Comes with lifetime limited warranty

The AddOn 32.8' laser optimized multi-mode fiber duplex LC/LC OM4 aqua patch cable is perfect for use with 10GB Ethernet applications. It offers connections between fiber patch panels, hubs, switches, media converters, routers and more. It features a low smoke zero halogen jacket to protect from toxic and corrosive gases. This patch cable works for LANs or SANs and renders high speed and increased bandwidth..Laser optimized multi mode fiber duplex OM4 patch cable is suitable for Ethernet, multimedia or communication applications.Cable length: 32.8'.Connections: two LC male network on both ends.Low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces.RoHS and green compliant.Core/cladding diameter: 50/125 u m.Comes in aqua color.Fiber termination: Ultra physical contact (UPC).Suitable for use with UCS C460 M4 rack mount server with DDR3, DDR4 memory.Offers the fire protection needed to run within walls.Perfect for LANs or SANs, recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Comes with lifetime warranty

StarTech Multimode 62.5/125 Duplex Fiber Patch Cable LC LC Network Cable 3.3 Ft Orange.Type: Network cable.Technology: Fiber optic.Type of Fiber Optics: Multimode.Features: Riser.Length: 3.3 ft.Core / Cladding Diameter: 62.5 / 125 micron.Connectors: 2 x LC multi-mode, male.Connectors (Other Side): 2 x LC multi-mode, male.Color: Orange.Manufacturer Warranty: Limited lifetime warranty.Multimode duplex fiber optic network cable provide connection between fiber networking devices for high-speed, long distance networks.

StarTech FIBLCST3 3m Multimode 62.5/125 Duplex Fiber Patch Cable LC-ST.Fiber optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high- speed data transmission.Attenuation loss meets or exceeds industry standards.Backed by StarTech.com lifetime warranty.Attenuation loss meets or exceeds industry standards

The Monoprice 6.56 ft. LC‑to‑SC Multimode Duplex Fiber Optic Cable (6391) delivers high‑performance data transmission for network backbones, server rooms, telecom equipment, and high‑speed enterprise connections. Designed with 50/125 multimode fiber, this cable supports fast, reliable optical signaling ideal for Gigabit and 10‑Gigabit applications. The LC‑to‑SC connector configuration provides broad compatibility with switches, patch panels, and fiber network devices, while the duplex design enables simultaneous bidirectional communication. Its aqua‑colored jacket helps with quick identification in dense cabling environments, and the precision‑engineered connectors ensure low insertion loss and stable performance. At 6.56 feet, this fiber cable is perfect for short‑run connections that require clean, efficient, and high‑integrity optical data transfer..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment. This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration. Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability. The 450FBLCLC1 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF)

Made from 50/125 zip cord fiber, the Tripp Lite Patch Cable features thoroughly tested dual LC connectors at each end which have minimum insertion loss. It is backwards compatible with 6.2 micron fiber and is equipped with built-in headroom for future applications. The cable is optimized for higher Gigabit and 10 Gbps networks with higher bandwidth capabilities. Beveled edges of the adapter are color coded for an easy and secure connection throughout your network..LCM/LCM fiber optic patch cable for efficient and high speed data transmission.Dual LC Male connectors for greater compatibility.Made from glass graded index fiber for minimum signal loss.OFNR rated PVC Jacket ensures durability.Compliance Standards: RoHS qualified.Comes with a limited lifetime warranty.The orange Tripp Lite 10' Duplex Fiber Optic LCM/LCM Patch Cable is optimized for high data transfer speeds of 1 Gbps making it a great choice for data centers and network applications.

StarTech.com® 50/125 micrometer Duplex multimode fiber optic cable is 3.28' long and is suitable for high performance patch and fiber data distribution systems. Transmits data at a speed of 10 Gb/s. Cable has male LC network connectors on the first and second end for providing smooth connection between fiber networking devices. Aqua cord cable is suitable for high bandwidth data transmissions over 10 gigabit Ethernet and fiber channel network. Perfect solution for fiber cable that runs between multiple backbone switches, hubs, routers and higher end networking equipment. Molded connector cable has flame retardant low smoke zero halogen jacket for optimal insulation and ensures minimal smoke, toxicity as well as corrosion when exposed to high sources of heat. Compatible with 850nm VCSEL source..Fiber optic cable is suitable for data applications requiring high speed data transmission.A convenient length of 3.28' for ease of installation.Features 2 x LC male network first end and 2 x LC male network second end connectors for secure data transmission.StarTech.com® A50FBLCLC1 3.28' Aqua laser-optimized network cable with LC male connectivity allows you to quickly transfer data. Supports data transfer speed rate of up to 10 Gb/s.

Because of its immunity to electronic interference and its greater speeds over longer distances, fiber optic cabling has become the conduit of choice for high speed network communications. Monoprice is proud to offer a full line of high-quality Single-mode and Multi-mode duplex cables using optical fibers made by Corning. This is an OM3 "Aqua" laser-optimized, multi-mode cable with a 50 ?m core and 125 ?m cladding diameter. The cable has color-coded Dual LC connectors on each end and is ideal for use in 10 Gigabit Ethernet (GbE) networks. The cable jacket is OFNR (Optical Fiber, Non-conductive, Riser) rated by UL, which means that it complies with fire safety and insurance requirements and is safe for use within the walls, and between the floors, of commercial class buildings..Supports fast data transfer and efficient power delivery.Built for durability with high-quality materials.Compact design simplifies installation and saves space

Ideal solution for data applications requiring high speed data transmission and fiber connections in patch panels, hubs, switches, and routers..Aqua.Fiber optic/2 x LC male network first and second end.Use in gigabit Ethernet and fiber channel applications.9.84'.Type: Singlemode, Technology: Fiber optic.Core/cladding diameter: 50/125 micron.Jacket type: LSZH rated (low smoke zero halogen).Attenuation loss meets or exceeds industry standards.Molded connectors.Certifications and standards: RoHS.Weight: 1.6 oz..Warranty: Lifetime limited

Includes 10' duplex MMF cable LC/LC 62.5/125 fiber cable..Orange.Fiber optic LC male/LC male.Duplex multimode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket, glass fiber.Applications: Computer networking (fiber).System requirements: Any fiber optic hardware or NIC card requiring multimode Duplex cable with SC/LC connectors.Core/cladding diameter: 62.5/125 micron m.Fiber optic mode: Multimode.Network speed: 1 Gbps.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.color-coded shrouds identify transmit and receive.Compliant and standards: FDDI and OFNR.Warranty: Lifetime limited

Tripp Lite® 2 m Duplex multimode fiber optic patch cable in in aqua color has LC male/male connectors on first and second end. Economical cable features high-speed, high-bandwidth and is used with VCSEL, LED laser light sources..Aqua.Cable type: Fiber optic.Cable length: 2m.Material: Low smoke zero halogen (LSZH) - jacket.Connector details: 2 x LC male IEEE 802.3ae network on first and second end.Fiber optic mode: Multi-mode.Features: Laser-optimized multimode fiber (LOMMF), high speed, high bandwidth, low-cost.Core/cladding diameter: 50/125 micrometer, backward compatible with legacy LAN's, Network speed: 10Gbps/40Gbps/100Gbps.Application: Computer networking.LOMMF cable allows 10Gb serial transmission over extended distances in the 850nm wavelength window, where low-cost Vertical Cavity Surface Emitting Lasers (VCSELs) enable a cost-effective, high bandwidth solution.Use with VCSEL and LED laser light sources and ideal for fibre channel (SAN) applications.Certification and Standards: OM4 rated, TIA LOMMF compliant, RoHS.Warranty: Lifetime limited.Tripp Lite® 2 m Duplex multimode fiber patch cable in aqua color has LC male/male connectors and is used for fiber channel applications.

The Monoprice 6.56 ft. OM3 LC to LC Duplex Multimode 50/125 Fiber Optic Network Cable (6386) delivers fast, high‑bandwidth 10Gb data transmission for enterprise networks, server rooms, data centers, and high‑performance telecom environments. Designed with premium Corning®‑grade 50/125 µm multimode fiber, this OM3‑rated cable ensures low‑loss, high‑integrity signal performance over short‑to‑medium distances, making it ideal for SANs, backbone connections, and high‑capacity switch‑to‑switch links. Its LC‑to‑LC duplex connectors provide secure, reliable mating with modern networking hardware, while the durable aqua OFNR‑rated jacket ensures safe installation in riser spaces and structured cabling infrastructures. Engineered for reliability and long‑term durability, this Monoprice fiber optic patch cable delivers industry‑proven optical clarity, strong attenuation control, and top‑tier performance for demanding 10Gig networking applications. [order.icintracom.com], [spacebound...utions.com]0.Supports fast data transfer and efficient power delivery.Built for durability with high-quality materials.Compact design simplifies installation and saves space

Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment. This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.The 450FBLCLC3 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF)

Fiber optic patch cable..Yellow.Fiber optic LC male/LC male.Duplex multimode fiber is most commonly used in LAN applications.10'.Material: Polyvinyl chloride (PVC) jacket, glass fiber.Applications: Networking equipment that requires single mode fiber optic patch cables

StarTech Multimode LC/UPC to LC/UPC OM4 fiber optic cable enables 40/100G network connections. The push-pull tabs on each connector ensure quick connection and removal, facilitating accurate installation in high connection density environments. The bend-insensitive fiber and molded strain reliefs support cable runs requiring micro/macro bends while maintaining low attenuation. The retractable strain-relief housings enable toolless in-field polarity swapping. Color-coded LC-Duplex connectors ensure error-free polarity configuration..Multimode OM4 fiber optic cable enables 40/100G network connections.Cable length is 26.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in aqua with straight white connectors.Supports 10/40/100G networks; backward compatible with OM3.Can be uses in 40/100 Gigabit Ethernet and fiber architecture.High micro-bending resistance facilitates tight bends in intricate environments, perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.Push-pull tab design provides easy access for precise insertion/removal in high-density installations.Retractable connector housings for toolless polarity swapping.LC/LC-UPC ends for improved return loss over PC polish.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend.Safe for enclosed/poorly ventilated spaces.Great for 850nm and 1300nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and LED sources.Color-coded LC-Duplex connectors ensure error-free polarity configuration.Lifetime manufacturer limited warranty

The AddOn® ADD-LC-LC-5M5OM3 LC-to-LC male/male OM3 duplex fiber optic patch cable in aqua, is suitable for use with 10 Gb Ethernet applications. This cable measuring 5 m uses 850 nm vertical cavity surface emitting laser and it supports 2000 MHz/km effective modal bandwidth at 850nm. The laser optimized multi-mode fiber cable has low smoke zero halogen jacket, which provides protection from toxic and corrosive gases in badly ventilated spaces. This patch cable is backward compatible with existing 50/125 equipment, The cable is perfect for use with LANs or SANs and for connecting fiber patch panels, hubs, switches, media converters and routers..Patch cable for LANs or SANs and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Cable length: 5 m.Connections: 2 x LC male to 2 x LC male.Wired connectivity.Material: LSZH (jacket), conductor: Copper.Network: Gigabit Ethernet.Fiber type: LOMM.Core/cladding diameter: 50/125 um.Compatible with M7100 - 24X managed switch - (XSM7224-v1h1).Standard: OM3.It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduits.They provide higher speeds and increased bandwidth compared to conventional twisted-pair copper cable.Comes with limited lifetime warranty.Aqua 5 m fiber optic patch cable with LC connectors and low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.

Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment.This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.The 450FBLCLC2 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF).Certifications & Standards: RoHS, WEEE

Startech® 6.56' LC To LC Multimode 50/125 Duplex LSZH Fiber Patch Cable, Aqua.Fiber optic cable is suitable for data applications requiring high speed data transmission.A convenient length of 6.56' for ease of installation.Features 2 x LC male network first end and 2 x LC male network second end connectors for secure data transmission.StarTech.com® A50FBLCLC2 6.56' Aqua laser-optimized network cable with LC male connectivity allows you to quickly transfer data. Supports data transfer speed rate of up to 10 Gb/s.

HP® 2M Multi-mode OM3 LC/LC FC cable has 2 x LC male at first end and 2 x LC male at other end. Cable is compatible with SAN switches 8/24, 8/40, 8/8 and more similar products..Dimensions: 12"(H) x 10"(W) x 1/2"(D).6.56'.Fiber optic mode: Multi-mode.Core/cladding diameter: 50/125 micrometer.Connector: 2 x LC male first end, 2 x LC male second end.Compatibility: HP storageworks san switches, 8/24, 8/40, 8/8, 8/80, 4/16.Includes 2M lc-lc multi-mode om3 fiber channel cable.Weight: 1 lbs. imperial, 0.45 kg metric.HP® 2M Multi-mode OM3 LC/LC FC cable features fiber optic cable for good performance and has a core/cladding diameter of 50/125 micrometer.

StarTech Multimode LC/UPC to LC/UPC OM4 fiber optic cable enables 40/100G network connections. The push-pull tabs on each connector ensure quick connection and removal, facilitating accurate installation in high connection density environments. The bend-insensitive fiber and molded strain reliefs support cable runs requiring micro/macro bends while maintaining low attenuation. The retractable strain-relief housings enable toolless in-field polarity swapping. Color-coded LC-Duplex connectors ensure error-free polarity configuration..Multimode OM4 fiber optic cable enables 40/100G network connections.Cable length is 9.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in aqua with straight white connectors.Supports 10/40/100G networks; backward compatible with OM3.Can be uses in 40/100 Gigabit Ethernet and fiber architecture.High micro-bending resistance facilitates tight bends in intricate environments, perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.Push-pull tab design provides easy access for precise insertion/removal in high-density installations.Retractable connector housings for toolless polarity swapping.LC/LC-UPC ends for improved return loss over PC polish.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend.Safe for enclosed/poorly ventilated spaces.Great for 850nm and 1300nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and LED sources.Color-coded LC-Duplex connectors ensure error-free polarity configuration.Lifetime manufacturer limited warranty

Because of its immunity to electronic interference and its greater speeds over longer distances, fiber optic cabling has become the conduit of choice for high speed network communications. Monoprice is proud to offer a full line of high-quality Single-mode and Multi-mode duplex cables using optical fibers made by Corning. This is an OM3 "Aqua" laser-optimized, multi-mode cable with a 50 ?m core and 125 ?m cladding diameter. The cable has color-coded Dual LC connectors on each end and is ideal for use in 10 Gigabit Ethernet (GbE) networks. The cable jacket is OFNR (Optical Fiber, Non-conductive, Riser) rated by UL, which means that it complies with fire safety and insurance requirements and is safe for use within the walls, and between the floors, of commercial class buildings..Supports fast data transfer and efficient power delivery.Built for durability with high-quality materials.Compact design simplifies installation and saves space

HP® 5M Multi-mode OM3 LC/LC FC cable has 2 x LC male at first end and 2 x LC male at other end. Cable is compatible with SAN switches 8/24, 8/40, 8/8 and more similar products..Dimension: 12"(H) x 10"(W) x 0.5"(D).16.40'.Fiber optic mode: Multi-mode.Core/cladding diameter: 50/125 micrometer.Connector: 2 x LC male first end, 2 x LC male second end.Compatibility: HP storageworks san switches, 8/24, 8/40, 8/8, 8/80, 4/16.Includes 5M lc-lc multi-mode om3 fiber channel cable.Weight: 1 lbs. imperial, 0.45 kg metric.HP® 5M Multi-mode OM3 LC/LC FC cable features fiber optic cable for good performance and has a core/cladding diameter of 50/125 micrometer.

StarTech Multimode LC/UPC to LC/UPC OM4 fiber optic cable enables 40/100G network connections. The push-pull tabs on each connector ensure quick connection and removal, facilitating accurate installation in high connection density environments. The bend-insensitive fiber and molded strain reliefs support cable runs requiring micro/macro bends while maintaining low attenuation. The retractable strain-relief housings enable toolless in-field polarity swapping. Color-coded LC-Duplex connectors ensure error-free polarity configuration..Multimode OM4 fiber optic cable enables 40/100G network connections.Cable length is 13.1'.Contains two fiber optic LC duplex connectors.Made of polypropylene in aqua with straight white connectors.Supports 10/40/100G networks; backward compatible with OM3.Can be uses in 40/100 Gigabit Ethernet and fiber architecture.High micro-bending resistance facilitates tight bends in intricate environments, perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.Push-pull tab design provides easy access for precise insertion/removal in high-density installations.Retractable connector housings for toolless polarity swapping.LC/LC-UPC ends for improved return loss over PC polish.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend.Safe for enclosed/poorly ventilated spaces.Great for 850nm and 1300nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and LED sources.Color-coded LC-Duplex connectors ensure error-free polarity configuration.Lifetime manufacturer limited warranty

25m (82ft) LC/UPC to LC/UPC OM4 Multimode Fiber Optic Cable, 50/125µm LOMMF/VCSEL Zipcord Fiber, 100G Networks, Low Insertion Loss, LSZH Fiber Patch Cord.OM4 Laser-Optimized Multimode Fiber Cable is immune to EMI and supports up to 100 Gbps Ethernet; Full-duplex zip-cord with color-coded TX/RX connectors enable quick visual identification of polarity and conversion to simplex cabling.LC/LC connectors with UPC polished ends significantly improves return loss over PC polish; Robust molded connector strain reliefs minimizes wear from bending; Protective Aramid fiber for increased tensile strength.Individually tested for signal integrity; LSZH (low smoke zero halogen) jacket does not emit toxic fumes if combusted; Safe for enclosed/poorly ventilated spaces; Attenuation value under 2.3dB/km meets or exceeds industry standards.OM4 LC/LC multimode cable supports 1/10/40/100 Gbps networks; Backward compatible with OM3; For high-density network applications such as SANs, data servers, fiber switches, SFP+, QSFP+, and QSFP28 transceivers.SPECS: 25m (82ft); Color: Aqua (OM4); LC/LC UPC; 50/125µm Core/Cladding; 850nm or 1300nm LED/VCSEL; Modal Bandwidth: 2000MHz•km at 850nm; Cable OD: 2.9mm; Bend Radius: Static 1.2in (3cm), Dynamic 2.4in (6cm); Backed for Life.This multimode 50/125µm fiber optic patch cord is backward compatible with OM3 and 1/10/40 Gbps networks, ensuring a reliable connection with legacy fiber environments..Housed in a LSZH (Low-Smoke, Zero-Halogen) flame-retardant jacket, this OM4 fiber cable emits low smoke and toxic fumes when exposed to high heat or in the event of a fire. It enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where building codes are a consideration..Each OM4 fiber cable is also individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability..Use in 40/100 Gigabit Ethernet and fiber-channel applications.The LC to LC Multimode Duplex Fiber Optic Patch cable facilitates reliable connectivity across 40 and 100 Gigabit networks.

Duplex patch cable..Aqua.Fiber optic LC male/LC male.Backward compatible with legacy LAN's.10'.Device supported: Network device.Applications: For use with 40/100 gigabit ethernet equipment.Jacket type: LSZH.Core/cladding diameter: 50/125 microm.Fiber optic mode: Laser-optimized multimode fiber (LOMMF).Network speed: 10 Gbps / 40 Gbps / 100 Gbps.40/100Gb ethernet speed to 300 meters at 850 nm.Includes 10' duplex multimode 50/125 aqua OM4 fiber patch cable, LC/LC.Compliant and standards: OM4 rated, TIA LOMMF and RoHS compliant.Warranty: Lifetime limited

The Tripp Lite 50' aqua OM4 duplex fibre optic patch cable is the perfect solution for networks that require instant and clear signal transmission. This multimode optic patch cable has two LC male connectors on both ends. Featuring a low-smoke, zero halogen (LSZH) jacket, this optic cable maintains integrity, even when bent with abrasion-resistant. The patch cable with 50/125 u m core/cladding diameter, is suitable for LANs, SANs and high-speed parallel interconnects for head-ends, central offices as well as data centers..Fiber optic patch cable is ideal for LANs, SANs and high-speed parallel interconnects for head-ends, central offices and data centers.Cable length: 50'.Connections: Two LC male on both ends.Glass fiber construction and low smoke zero halogen (LSZH) jacket for durability.Comes in aqua color.Network speed: 10/40/100 Gbps.Data transfer rate: 12.5 GBps.Core/cladding: 50/125 u m.Allows 40/100 Gb serial transmission up to 300 m (at 850 nm).Commonly used with VCSEL and LED laser light sources, sturdy dual LC male connectors meet insertion loss standards.Provides 10x more bandwidth than conventional 62.5 u m multimode fiber.Backward compatible with existing 50/125 fiber.Meets IEEE 802.3ae, TIA LOMMF and RoHS certifications or standards.Comes with lifetime limited warranty

Tripp Lite 50/125 micrometer Duplex multi-mode fiber optic patch cable is 33' long and with two conductors is suitable for high performance patch and fiber data distribution systems. Superior quality construction ensures error-free signal transfer. Cable features LC male IEEE 802.3ae network connector at both the ends for efficient connectivity. Cable allows 40/100Gb serial transmission over extended distances in the 850nm wavelength window. Low-smoke zero-halogen jacket in attractive aqua color limits the amount of toxic smoke emitted from combustion and perfect for poorly ventilated areas. Optic cable is suitable for fiber channel applications..Fiber optic cable is suitable for fiber channel (SAN) applications and is perfect to use with VCSEL and LED laser light sources.A convenient length of 33' for ease of installation.Features 2 x LC male first end and 2 x LC male second end connectors for secure data transmission.Recommended for 40/100-Gig ethernet applications.Utilizes LSZH jacket for optimum installation.Compatible to use with PC.Comes in aqua color for a new look.Contains a core/cladding diameter of 50/125 micron for easy connectivity.Uses fiber optic cable for high-speed data transmission.Renders patch cable used to connect your head-ends, central offices and data centers.Consist of 10 meter ( 33ft ) duplex multimode 50/125 aqua OM4 fiber patch cable, LC/LC connectors for secured connectivity.Meets OM4 rated, TIA LOMMF, IEEE 802.3ae, RoHS compliant standards.Comes with limited lifetime warranty.Tripp Lite 33' Aqua fiber optic patch cable with LC male connectivity designed for 40/100-Gb Ethernet applications. Use with VCSEL and LED laser light sources.

Aqua fiber optic LC male/LC male duplex patch cable is backward compatible with legacy LAN's..16'.Applications: For use with 10-gigabit ethernet equipment.Core/cladding diameter: 50/125 microm.Dimensions: 2"H x 4"W.Beep: Indicates volume level, microphone mute and others.Sound: Mic noise canceling, sixth generation echo cancellation, tone control, crystal clear sound and voice (DSP).Talk time: 21 hrs, 500 hrs stand by time, 300 mAh battery

The AddOn® ADD-LC-LC-1M6MMF LC-to-LC male/male OM1 duplex fiber optic patch cable in orange, is suitable for use with Ethernet, multimedia, communication applications and with 1 Gb applications. This 1 m cable provides higher speeds and increased bandwidth. The multi-mode fiber cable has low smoke zero halogen jacket that provides protection from toxic and corrosive gases in badly ventilated spaces. This cable is perfect for LANs or SANs and for connecting fiber patch panels, hubs, switches, media converters and routers..Patch cable for LANs or SANs and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Cable length: 1 m.Connections: 2 x LC male to 2 x LC male.Wired connectivity.Material: LSZH (jacket), conductor: Copper.Network: Gigabit Ethernet.Fiber type: MMF.Core/cladding diameter: 62.5/125 um.Standard: OM1.Comes with limited lifetime warranty.Orange 1 m fiber optic patch cable with LC to LC connectors and low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.

OM5 LC to LC multimode duplex fiber optic patch cable by StarTech facilitates connectivity across 40G and 100G networks. It supports SWDM (Shortwave Wavelength Division Multiplexing) across an extended wavelength range of 850-953nm VCSEL, enhancing signal quality and performance capacity over OM4. Precision-manufactured ceramic ferrules ensure correct fiber alignment to prevent connectivity issues and minimize insertion loss. Designed for reliability in high-density network applications, the LC to LC UPC polished fiber ends greatly improves return loss characteristics over older PC polishing techniques. The Laser-Optimized Multi-Mode Fiber (LOMMF) OM5 fiber patch cable is perfect for 850-953nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and 1300 nm LED sources..Enhance the performance capabilities of SWDM applications with this OM5 fiber cable.Cable length: 49.2'.LC/LC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in Aramid-reinforced green jacket for a loaded bend radius of 6cm and 3cm when unloaded.Multimode OM5 fiber cable supports 10/40/100G networks and backward compatible with OM4/OM3.Perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.LSZH jacket emits low toxic fumes if combusted and safe for enclosed/poorly ventilated spaces.Attenuation value under 2.4dB/km outperforms industry standards.High micro-bend resistance facilitates tight bends in complex installations.Short Wavelength Division Multiplexing (SWDM) enables extended 850-953nm wavelength support for greater channel isolation, enhancing performance capacity beyond OM4 cables.Zipcord design, color-coded connectors for polarity.Lifetime manufacturer limited warranty

The HP® Premier Flex 1 m aqua multimode OM4 2 fiber optic network cable features LC male/male connectors on both ends for enhanced connectivity. This cable is suitable to work with HP DC SAN director switches, HP SN6000 fiber channel switch and HP StorageWorks MPX200 multifunction router..Fibre optic network cable for network devices.Cable length: 1 m.Connections: LC male/male on both ends.Connectivity: Wired.Meets REACH, TIA/EIA-568-B.2-10 certifications and standards.Color: Aqua.Compatibility: HP DC SAN Director Switches, HP SN6000 Fibre Channel Switch, HP StorageWorks MPX200 Multifunction Router

Compared to conventional twisted-pair copper cable, this LC-LC OM4 AddOn® 9.84' aqua fiber optic patch cable offers higher speeds and increased bandwidth. Multi-mode, LC/LC OM4 cable is suitable for use with 10GB Ethernet applications. The low smoke zero halogen jackets protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It is specifically designed for Ethernet, multimedia or communication applications. The patch cable provides backward compatibility with existing 50/125 um equipment..Laser optimized multi-mode fiber patch cable is specifically designed for Ethernet, multimedia, or communication applications.9.84' long for easy installation.Two LC male x two LC male connector provides the necessary connection between fiber networking devices.Designed for use with 10GB applications.Low smoke zero halogen jacket provides protection against toxic and corrosive gases in badly ventilated spaces and other most crucial areas.Meets RoHS, Green compliance and OM4 certified.Patch cable with fiber core/cladding diameter of 50/125 um has UPC termination to ensure secure connection.Laser optimized multimode fiber is built for speed and supports network device.Comes in aqua color.Duplex fiber optic cable offers simultaneous, bidirectional data transfer.Well suited for LANs or SANs and used for connection between fiber patch panels, hubs, switches, media converters and routers, etc.Provides fire protection needed to run within walls and air plenums eliminating the need for conduits.Offers higher speeds and increased bandwidth compared to conventional twisted pair copper cable.Comes with lifetime warranty.The AddOn® LC-LC OM4 9.84' aqua fiber optic patch cable offers fire protection needed to run within walls and air plenums terminating the need for conduits.

The HP® QK735A PremierFlex fiber optic cable is 15 m long and features LC male connector at both the ends to establish connection between fiber network devices for high-speed data transfer. It is compatible with HP DC SAN director switches, HP SN6000 fiber channel switch and HP StorageWorks MPX200 multifunction router..Fiber optic cable establishes connection between fiber network devices.Cable length: 15 m.Connections: LC male to LC male.Wired connectivity.REACH compliant.Compatible with HP DC SAN director switches, HP SN6000 fiber channel switch, HP StorageWorks MPX200 multifunction router.15 m fiber optical cable is compatible with HP DC SAN director switches, HP SN6000 fibre channel switch.

Because of its immunity to electronic interference and its greater speeds over longer distances, fiber optic cabling has become the conduit of choice for high speed network communications. Monoprice is proud to offer a full line of high-quality Single-mode and Multi-mode duplex cables using optical fibers made by Corning. This is an OM3 "Aqua" laser-optimized, multi-mode cable with a 50 ?m core and 125 ?m cladding diameter. The cable has color-coded Dual LC connectors on each end and is ideal for use in 10 Gigabit Ethernet (GbE) networks. The cable jacket is OFNR (Optical Fiber, Non-conductive, Riser) rated by UL, which means that it complies with fire safety and insurance requirements and is safe for use within the walls, and between the floors, of commercial class buildings..Ensures fast signal transmission with minimal interference.Durable construction designed for long-term use.Flexible design allows easy installation and space savings

The HP ® Premier Flex 5 m aqua multi-mode OM4 50/125 fiber optic cable has LC male connector on both ends for enhanced connectivity. It features low smoke zero halogen jacket for added protection. This cable is compatible with HP DC SAN director switches, HP SN6000 fiber channel switch and HP StorageWorks MPX200 multifunction router. It allows data transmitting over longer distances, at high rate with few transmission errors..Fiber optic cable is great for robust and reliable data transfer.Cable length: 5 m.Connections: LC male on first end and LC male on second end.Connectivity: Wired.Has low smoke zero halogen (LSZH) jacket for added durability and better use.REACH regulation.Comes in aqua color.Core/cladding diameter: 50/125 u m.Suitable for use with HP DC SAN Director switches, HP SN6000 fiber channel switch, HP StorageWorks MPX200 multifunction router.Weight: 0.45 kg

HP® Premier Flex 6.56' LC Male/Male fiber optic cable features LC male network connectors. Cable measures 12" x 10" x 0.5" and can be used for networking and servers..LC Male/Male.6.56'.Device supported: Network device.Fiber optic mode: Multi-mode.Weight: 15.87 oz..HP® Premier Flex 6.56' LC Male/Male fiber optic cable measuring 6.56' is compatible with HP blade systems and disk storage systems.

The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 10gigabit applications at the same time being backward compatible with 50/125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The ALOGIC OM3 Patch Cables are available in various lengths starting from 0.5m to 100m length.Designed for high-speed data transmission in fiber optic networks, ideal for connecting servers, switches, and storage devices in data centers or enterprise environments.The cable measures 6.6ft, providing flexibility for medium-distance connections without signal loss.Features LC to LC connectors with precision alignment for secure and reliable optical signal transfer.Constructed with OM3 multimode fiber for 10Gbps performance, LSZH jacket for durability, and finished in a turquoise color for easy identification.Supports high-bandwidth applications up to 10 Gigabit Ethernet, ensuring fast and efficient data transfer.Compatible with all OM3-rated fiber optic equipment, including transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling systems.2 Years Manufacturer's Warranty

The cable features a Low Smoke Zero Halogen (LSZH) jacket, ensuring safer usage in environments where smoke and toxic emissions are a concern. Equipped with dual LC multi-mode connectors, this cable offers compatibility with various devices, enhancing overall network performance. With a core/cladding diameter of 50/125 microns, this patch cable supports high bandwidth applications, making it suitable for demanding network environments. This product adheres to C-ETL and ETL standards, ensuring it meets rigorous safety and performance benchmarks for fiber optic cables. This cable operates in duplex mode, allowing for simultaneous transmission and reception of data, maximizing network efficiency..Designed for high-speed fiber optic connectivity in data centers, enterprise networks, and storage systems, ensuring reliable performance for mission-critical applications.Generous 6.6ft (2m) length provides flexibility for medium-distance connections without compromising signal quality.LC to LC connectors deliver secure, precise, and low-loss optical signal transmission for maximum efficiency.Built with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable LSZH jacket and a turquoise finish for easy identification in complex setups.Supports high-bandwidth applications including 40G/100G Ethernet, ensuring lightning-fast data transfer for demanding workloads.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, guaranteeing quality and reliability.2 Years Manufacturer's Warranty

Discover the ALOGIC fiber optic network cable, a solution designed to meet the demands of modern networking environments. This duplex cable features halogen-free construction and is equipped with LC multi-mode connectors on both ends, ensuring a safe and reliable connection. With a core and cladding diameter of 50 / 125 micron, it supports efficient light transmission for high-speed data communication. The Low Smoke Zero Halogen (LSZH) jacket material not only enhances safety by reducing toxic and corrosive gas emissions but also complies with OM3 and ETL standards, making it a durable and compliant choice for your networking needs..Perfect for high-speed fiber optic connections in enterprise networks and data centers, ensuring reliable LC-to-LC interface integration.Convenient 3.28ft length for tidy, space-efficient installations.Equipped with LC male connectors on both ends for secure and precise connectivity.Constructed with OM3 multimode fiber for excellent bandwidth, featuring a durable LSZH jacket and a bright turquoise color for easy identification..Supports up to 10Gbps high-speed data transfer, making it ideal for modern networking and storage applications.Compatible with LC interface devices, fiber optic transceivers, and OM3-compliant networking hardware.2 Years Manufacturer's Warranty

The Multi Mode OM3 cables are designed to support high transfer speed, the cables are capable of supporting up to 10gigabit applications at the same time being backward compatible with 5 /125 OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Ideal for high-speed fiber optic connections in data centers and enterprise networks, ensuring seamless LC-to-LC interface integration.Compact 1.64ft length for clean, clutter-free installations in tight spaces.Features LC male connector on both ends for secure and precise connectivity.Built with OM3 multimode fiber for superior bandwidth, protected by a durable LSZH jacket, and finished in a vibrant turquoise color for easy identification.Supports up to 10Gbps high-speed data transfer, making it perfect for demanding networking and storage applications.Compatible with LC interface devices, fiber optic transceivers, and OM3-compliant networking hardware.2 Years Manufacturer's Warranty

The ALOGIC network cable is designed to meet the needs of modern, high-speed networking environments. This cable features a halogen-free construction, making it a safer option by reducing the emission of toxic and corrosive gases in case of fire. With a core and cladding diameter of 50 / 125 micron, it is optimized for efficient data transmission, ensuring high-quality connectivity through its LC multi-mode connectors. The duplex configuration of the cable supports bidirectional data transfer, enhancing the efficiency of network systems. Additionally, the cable's compliance with OM4 standards ensures its performance over extended distances, making it an ideal choice for a wide range of applications. Its jacket, made from Low Smoke Zero Halogen material, not only contributes to safety but also offers durability, ensuring long-term reliability. Whether for residential or commercial use, the ALOGIC network cable is engineered to provide a high-performance, safe, and reliable networking solution..Perfect for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, delivering reliable performance for critical applications.Compact 3.28ft (1m) length offers flexibility for short-distance connections while keeping your setup neat and organized.LC to LC connectors ensure secure, precise, and low-loss optical signal transmission for uninterrupted connectivity.Made with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable PVC jacket and a turquoise finish for easy identification.Supports high-bandwidth applications including 40G/100G Ethernet, making it ideal for next-generation networking.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Meets ISO/IEC 11801 and TIA/EIA standards for structured cabling, ensuring top-tier quality and compliance.2 Years Manufacturer's Warranty

The Multi Mode OM4 cables are designed to support very high transfer speed, the cables are capable of supporting up to 100gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The ALOGIC OM4 Patch Cables are available in various lengths starting from 0.5m to 20m length..Ideal for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, delivering exceptional performance for demanding applications.Compact 1.64ft length for short-distance connections, reducing clutter while maintaining superior signal integrity.Features LC to LC connectors for secure, precise, and low-loss optical signal transmission.Made with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, protected by a durable LSZH jacket and finished in turquoise for easy identification..Supports high-bandwidth applications including 40G/100G Ethernet, ensuring lightning-fast data transfer for mission-critical tasks.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, guaranteeing quality and reliability.2 Years Manufacturer's Warranty