Multimode Transceivers
69 results
Our Compatible WatchGuard WG8583 SFP+ transceiver is based on our 10G-SFP-300 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Multi-Mode Fiber (MMF) optical cable. It has a minimum guaranteed optical budget of 4.6 dB, which typically is enough to reach about 300 meters over OM3 type fiber or 400 meters over OM4 or higher MMF category fiber. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our WatchGuard WG8583 compatible transceiver uses a high-quality VSCEL Laser transmitter operating at 850 nm nominal wavelength and a 850 nm PIN Photodiode receiver..WatchGuard WG8583 transceiver module is a Multi-Mode Fiber (MMF) & LC Duplex Connector..Its a 10GBASE-SR SFP+ Transceiver Module for 10-Gigabit Ethernet connectivity..Data Transfer Rate for this module is 10,312.5 Mbps (10.3125 Gbps) and 10,312,500 Kbps..Maximum Distance covered by this module is 300 meters.It supports 10-Gigabit Ethernet..The WatchGuard WG8583 has a power consumption of approximately 1.0 watts.It is a hot swappable module..the WatchGuard WG8583 is MSA compliant.The WatchGuard WG8583 has a Mean Time Between Failures (MTBF) of approximately 1,155,348 hours.This transceiver module operates at a wavelength of 850 nm
This Meraki now Cisco® MA-SFP-10GB-SR compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. Our transceiver is guaranteed to be 100% compatible with the equivalent Meraki now Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Meraki now Cisco®, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. We stand behind the quality of our products and proudly offer a limited lifetime warranty. Trade Agreements Act (TAA) versions of this part are available upon request..Duplex LC connector.Support hot-pluggable.Metal with lower EMI.Excellent ESD protection.VCSEL Transmitter and PIN Receiver.Distance up to 300m on 50/125um MMF (OM3).Single 3.3V power supply and Low power dissipation <0.8W.GR-253-CORE compliant.RoHS Compliant and Lead-Free.Compliant with IEEE 802.3ae
The Transition Networks TN-GLC-FE-100FX small form factor pluggable (SFP) Transceiver modules is designed to install in any SFP port allowing for 100Base-FX interfaces to the network through the SFP connector..Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100 Mbps for connectivity.With 100Base-FX technology, enjoy up to 100 Mbps data transfer rate over optical fiber cable
The Cisco® 40GBase-SR4 QSFP+ wired transceiver module offers links up to 492' long via multi-mode optical fiber at a wavelength of 840 - 860 nm. It supports both twisted-pair and optical fiber media types. This Hot-swappable, plug-in module allows high-bandwidth 40G optical links over 12-fiber parallel fiber terminated with MPO/MTP multifiber connectors..QSFP+ transceiver module for data networking and optical network.Dimensions: 0.5" x 0.7" x 2.9".Interfaces/ports: One MPO/MTP 40GBase-SR4 network.Max transfer distance: 492', Optical wave length: 840 - 860 nm.Media type supported: Optical fiber, Fiber mode supported: Multi-mode.Connectivity technology: Wired.Form factor: Hot-swappable, plug-in module.Power consumption: 1.5 W operational.Temperature: 32 - 158 deg F (operating), -40 - 185 deg F (storage).Meets FCC CFR21 Part 1040, GR-1435-CORE, GR-20-CORE, GR-326-CORE, IEC 60825-1 Class 1, MSA SFF-8431 certifications and standards.Comes with 1 year limited warranty
With its thicker diameter to carry the light of multiple wavelengths, this multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity..Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Provides high performance and flexible solution with 100 Gigabit Ethernet connectivity.With 100GBase-SR4 technology, get up to 100Gbps data transfer rate over optical fiber cable
HPE is the global edge-to-cloud company built to transform your business. How? By helping you connect, protect, analyze, and act on all your data and applications wherever they live, from edge to cloud, so you can turn insights into outcomes at the speed required to thrive in today's complex world..25G SFP28 LC SR 100m MMF transceiver for use in selected Aruba products.Dimensions: 0.5"H x 2.2"W x 0.6"D.Comes in silver
This Meraki Cisco® MA-SFP-1GB-SX compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Meraki Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Cisco Meraki MA-SFP-1GB-SX Compatible.1000Base-SX SFP Transceiver.Media Type: MMF - Wavelength: 850nm - Reach: 550m - Connector Type: LC.100% application tested and guaranteed compatible.Limited Lifetime Warranty.Meraki Cisco® MA-SFP-1GB-SX Compatible TAA Compliant 1000Base-SX SFP Transceiver (MMF, 850nm, 550m, LC, DOM)
The Axiom SFP-10G-SR-AX SFP+ transceiver module supports fiber network connectivity using MMF. The transceiver transfers the data over this MMF at 10GBASE-SR data rate, with a maximum reach of up to 300 m using OM3 and up to 400 m using OM4, at 850 nm wavelength. The transceiver comes with pre-configured specific code to meet the requirements set forth by your router and switch OEMs. This SFP transceiver module is compatible with Cisco Catalyst 2960-S/2960-X/3560-X/3750-X series and Nexus 5000/7000 series..SFP+ transceiver transfers the data over multi-mode fiber.Dimensions: 0.5"H x 0.5"W x 2.2"D.Compatible with Cisco Catalyst 2960-S/2960-X/3560-X/3750-X series, Nexus 5000/7000 series.Network technology: 10GBASE-SR.Interfaces/Ports: 1 x LC.Wavelength: 850 nm.Range: 300 m using OM3 and up to 400 m using OM4.Ethernet technology: 10 Gigabit Ethernet.Media type supported: Multi-mode optical fiber.Form factor: Plug-in module.Eliminates any network communication conflicts and provides easy identification.Fully comply with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms.Meets SFP+ MSA, RoHS, IEEE 802.3z standards.Comes with limited lifetime warranty
HPE is the global edge-to-cloud company built to transform your business. How? By helping you connect, protect, analyze, and act on all your data and applications wherever they live, from edge to cloud, so you can turn insights into outcomes at the speed required to thrive in today's complex world..25G SFP28 LC eSR 400m MMF transceiver for use in selected Aruba products.Dimensions: 0.5"H x 2.2"W x 0.6"D.Comes in silver
The AddOn® QSFP-40G-SR-BD-AO Cisco™ compatible QSFP+ transceiver module supports multi-mode optical fiber network connectivity using Gigabit Ethernet technology. This transceiver module transfers the data over MMF at 40GBase speed, with a maximum reach up to 150 m at a wavelength of 832 to 918 nm, using LC connector. The transceiver module with 40GBase-SR network interface, supports data networking and optical network applications..Hot swappable QSFP+ transceiver module supports multi-mode optical fiber network connectivity.Interfaces/ports: 1 x LC 40GBase-SR.Ethernet technology: 40 Gigabit Ethernet.Network technology: 40GBase-SR.Media type supported: Multi-mode optical fiber.Data transfer rate: 40 Gbps.Operating distance: 150m.Wavelength: 832 - 918 nm.TAA compliant.Comes with lifetime limited warranty
Add reliable and cost-effective 10 Gigabit Ethernet connections over multimode fiber with this SFP+ module. This StarTech® 10 Gigabit fiber SFP+ is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco Meraki switches and routers that support the Cisco Meraki MA-SFP-10GB-SR SFP+ transceiver module, as well as other major brands of networking equipment. The 10GBase-SR SFP+ delivers 10 Gigabit connectivity over multi-mode fiber cable with a range of up to 300 m (984 ft). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This 10 GbE SFP+ is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco and other major brands The 10 Gigabit multi-mode SFP+ is engineered to the highest quality standards and is 100% Cisco compatible, equivalent to the Cisco Meraki MA-SFP-10GB-SR SFP+ transceiver. The StarTech® SFP+ is configured and fully tested to ensure it works seamlessly with HP or other major brands of networking equipment. You can be assured that the use of StarTech® SFP+ products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber SFP+ transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a wide range of 10 Gigabit networking devices. Ideal for use in Cisco switches, routers and other networking equipment, the SFP+ optical transceiver provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The multi-mode fiber transceiver module supports Digital Diagnostics Monitoring (DDM), a maximum distance of up to 300 m (984 ft), and maximum data rates of up to 10Gbps. You can count on MASFP10GBSR for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco Meraki MA-SFP-10GB-SR guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.2 W.Hot-swappable with fiber-optic modules
The HP® JL309A 100GBase X151 2 strand QSFP28 transceiver module is compatible with HPE Aruba 2930M 24, 2930M 48, 3810, 3810M 24, 3810M 48, 5406R 16, 54XX and 8400 8-slot switches. This 100 Gigabit Ethernet module supports optical fiber. It has MPO multi-mode connector on the left end. This plug-in module transfers data up to a maximum distance of 328'..QSFP28 transceiver module for optical network application.Dimensions: 0.7"H x 0.3"W x 5.2"D.Compatibility: HPE Aruba 2930M 24, 2930M 48, 3810, 3810M 24, 3810M 48, 5406R 16, 54XX and 8400 8-slot switches.Network technology: 100GBase-SR4.Interface/ports: 1 x MPO.Range: 328'.Ethernet technology: 100 Gigabit Ethernet.Media type supported: Optical fiber.Form factor: Plug-in module.Weight: 0.1 lb.Comes with limited lifetime warranty.100GBase X151 2 Strand QSFP28 transceiver module features 1 x MPO connection and supports optical fiber media.
StarTech Multimode LC/UPC to LC/UPC OM4 fiber optic cable enables 40/100G network connections. The push-pull tabs on each connector ensure quick connection and removal, facilitating accurate installation in high connection density environments. The bend-insensitive fiber and molded strain reliefs support cable runs requiring micro/macro bends while maintaining low attenuation. The retractable strain-relief housings enable toolless in-field polarity swapping. Color-coded LC-Duplex connectors ensure error-free polarity configuration..Multimode OM4 fiber optic cable enables 40/100G network connections.Cable length is 13.1'.Contains two fiber optic LC duplex connectors.Made of polypropylene in aqua with straight white connectors.Supports 10/40/100G networks; backward compatible with OM3.Can be uses in 40/100 Gigabit Ethernet and fiber architecture.High micro-bending resistance facilitates tight bends in intricate environments, perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.Push-pull tab design provides easy access for precise insertion/removal in high-density installations.Retractable connector housings for toolless polarity swapping.LC/LC-UPC ends for improved return loss over PC polish.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend.Safe for enclosed/poorly ventilated spaces.Great for 850nm and 1300nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and LED sources.Color-coded LC-Duplex connectors ensure error-free polarity configuration.Lifetime manufacturer limited warranty
Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment.This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.The 450FBLCLC2 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF).Certifications & Standards: RoHS, WEEE
Aruba is unique in that it produces trustworthy outcomes based on three key ingredients - an extensive volume and variety of data, domain expertise, and experienced data scientists. Combining over 18 years of proven wired and wireless network expertise with modeling telemetry data from over one million wired, wireless and SD-WAN devices, Aruba can identify anomalies and provide prescriptive recommendations that network administrators can trust..10G SFP+ transceiver for use with selected Aruba switches.Dimensions: 0.6"H x 2.2"W x 0.5"D.Compatible with Aruba switches.Comes in silver.Lifetime manufacturer limited warranty.Range: 722'.Ethernet technology: 10 Gigabit Ethernet.Media type supported: Optical fiber.Form factor: Plug-in module.Weight: 0.1 lb.Comes with limited lifetime warranty.10GBase-SR SFP+ transceiver module features 1 x LC connection and supports optical fiber media.
Aruba is unique in that it produces trustworthy outcomes based on three key ingredients - an extensive volume and variety of data, domain expertise, and experienced data scientists. Combining over 18 years of proven wired and wireless network expertise with modeling telemetry data from over one million wired, wireless and SD-WAN devices, Aruba can identify anomalies and provide prescriptive recommendations that network administrators can trust..10G SFP+ transceiver for use with selected Aruba switches.Dimensions: 0.6"H x 2.2"W x 0.5"D.Compatible with Aruba switches.Comes in silver.Lifetime manufacturer limited warranty.Range: 984'.Ethernet technology: 10 Gigabit Ethernet.Media type supported: Optical fiber.Form factor: Plug-in module.Weight: 0.1 lb.Comes with limited lifetime warranty.10GBase-SR SFP+ transceiver module features 1 x LC connection and supports optical fiber media.
Add reliable and cost-effective Gigabit Ethernet connections over multimode fiber with this SFP module. This StarTech® Gigabit fiber SFP is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco switches and routers that support the Cisco Meraki MA-SFP-1GB-SX transceiver module, as well as other major brands of networking equipment. This 1000Base-SX SFP delivers Gigabit connectivity over multimode fiber cable, with a range of up to 550 m (1804 ft.). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This multimode SFP transceiver is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco Meraki and other major brands The MM Gigabit SFP is engineered to the highest quality standards and is 100% Cisco Meraki compatible, equivalent to the Cisco Meraki MA-SFP-1GB-SX SFP transceiver. The StarTech® SFP transceiver is configured and fully tested to ensure it works seamlessly with Cisco Meraki or other major brands of networking equipment. You can be assured that the use of StarTech® SFP products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a multitude of Gigabit networking devices. Ideal for use in switches, routers, and other networking equipment, the SFP provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The SFP supports multimode fiber cable with a maximum distance of 550 m or 1804 ft., and maximum data rates of up to 1.25Gbps. This GbE fiber SFP also supports Digital Diagnostics Monitoring (DDM / DOM). You can count on MASFP1GBSXST for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco Meraki MA-SFP-1GB-SX guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1 W.Hot-swappable with fiber-optic modules
The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports 1000Base‑SX/LX fiber with a standard SC connector.Operates as a stand‑alone Gigabit Ethernet Media and Rate Converter that bridges 10/100/1000Base‑T copper ports to 1000Base‑SX/LX fiber ports.Provides selectable throughput of 10 Mbps, 100 Mbps, and 1000 Mbps, ensuring backward compatibility with legacy devices while delivering high‑speed Gigabit performance for modern applications..Extends connectivity up to 550 meters over multimode fiber (SX) and up to 10,000 meters (10 km) over singlemode fiber (LX), supporting both medium‑range and long‑range deployments..Fully compliant with Gigabit Ethernet standards, supporting 10/100/1000Base‑T to 1000Base‑SX/LX conversion for interoperability with modern switches, routers, and servers..Operates efficiently with a typical power consumption of approximately 3 Watts.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility with industry‑standard fiber components and simplifying sourcing and replacement..Designed for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 850 nm for multimode fiber (SX) and 1310 nm for singlemode fiber (LX), ensuring dependable signal transmission across different fiber types..Lifetime Limited Warranty
The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports 1000Base‑SX/LX fiber with a standard SC connector, providing compatibility with both multimode and singlemode fiber cabling for flexible deployment options..Operates as a stand‑alone Gigabit Ethernet Media and Rate Converter that bridges 10/100/1000Base‑T copper ports to 1000Base‑SX/LX fiber ports.Offers selectable throughput of 10 Mbps, 100 Mbps, and 1000 Mbps, ensuring backward compatibility with legacy devices while delivering high‑speed Gigabit performance for modern applications..Extends connectivity up to 550 meters over multimode fiber (SX) and up to 10,000 meters (10 km) over singlemode fiber (LX).Fully compliant with Gigabit Ethernet standards, supporting 10/100/1000Base‑T to 1000Base‑SX/LX conversion for interoperability with switches, routers, and servers..Operates efficiently with a typical power consumption of approximately 3 Watts.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility with industry‑standard fiber.Designed for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 850 nm for multimode fiber (SX) and 1310 nm for singlemode fiber (LX).Lifetime Limited Warranty
The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Supports 1000Base‑SX/LX fiber with a standard SC connector.Operates as a stand‑alone Gigabit Ethernet Media and Rate Converter that bridges 10/100/1000Base‑T copper ports to 1000Base‑SX/LX fiber ports.Offers selectable throughput of 10 Mbps, 100 Mbps, and 1000 Mbps, ensuring backward compatibility with legacy devices while delivering high‑speed Gigabit performance for modern applications..Extends connectivity up to 550 meters over multimode fiber (SX) and up to 10,000 meters (10 km) over singlemode fiber (LX).Fully compliant with Gigabit Ethernet standards, supporting 10/100/1000Base‑T to 1000Base‑SX/LX conversion for interoperability with switches, routers, and servers..Operates efficiently with a typical power consumption of approximately 3 Watts.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility with industry‑standard fiber components.Designed for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 850 nm for multimode fiber (SX) and 1310 nm for singlemode fiber (LX), ensuring dependable signal transmission across different fiber types..Lifetime Limited Warranty
What if you could deploy 100 Gb transceiver connections with an overall reduction of cost per bit? HPE 100Gb QSFP28 Transceivers are designed to meet the increasing demand of growing bandwidth in the data center. The 100 Gb performance allows a reduction of the port density and number of hardware components required to achieve this higher speed. With reduction of cost per bit, HPE 100Gb QSFP28 Transceivers can significantly reduce Capex and Opex spending on interconnect connections. Features: Featured Characteristics: The HPE 100Gb QSFP28 transceivers have four optical lanes in each direction, allowing each to operate at 25 Gb. MPO and Duplex LC connectors for plugging in multi-mode fiber cables. Maximum link length of 70 m on OM3 and 100 m on OM4 multimide fiber at 100 Gb/s..Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.100 Gigabit Ethernet - High bandwidth performance, ease of use and reliable connectivity.With 100GBase-X technology, enjoy up to 1000Gbps data transfer rate over supported network cable