Meraki Transceivers
7 results
This Meraki Cisco® MA-SFP-1GB-SX compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Meraki Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Cisco Meraki MA-SFP-1GB-SX Compatible.1000Base-SX SFP Transceiver.Media Type: MMF - Wavelength: 850nm - Reach: 550m - Connector Type: LC.100% application tested and guaranteed compatible.Limited Lifetime Warranty.Meraki Cisco® MA-SFP-1GB-SX Compatible TAA Compliant 1000Base-SX SFP Transceiver (MMF, 850nm, 550m, LC, DOM)
This Meraki now Cisco® MA-SFP-10GB-SR compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. Our transceiver is guaranteed to be 100% compatible with the equivalent Meraki now Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Meraki now Cisco®, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. We stand behind the quality of our products and proudly offer a limited lifetime warranty. Trade Agreements Act (TAA) versions of this part are available upon request..Duplex LC connector.Support hot-pluggable.Metal with lower EMI.Excellent ESD protection.VCSEL Transmitter and PIN Receiver.Distance up to 300m on 50/125um MMF (OM3).Single 3.3V power supply and Low power dissipation <0.8W.GR-253-CORE compliant.RoHS Compliant and Lead-Free.Compliant with IEEE 802.3ae
Add reliable and cost-effective Gigabit Ethernet connections over single-mode fiber with this SFP module. This StarTech® Gigabit fiber SFP is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco Meraki switches and routers that support the Cisco Meraki MA-SFP-1GB-LX10 transceiver module, as well as other major brands of networking equipment. This 1000Base-LX SFP delivers Gigabit connectivity over single-mode fiber cable, with a range of up to 10 km (6.2 mi.). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This single-mode SFP transceiver is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco and other major brands The SM Gigabit SFP is engineered to the highest quality standards and is 100% Cisco Meraki compatible, equivalent to the Cisco Meraki MA-SFP-1GB-LX10 SFP transceiver. The StarTech® SFP transceiver is configured and fully tested to ensure it works seamlessly with Cisco Meraki or other major brands of networking equipment. You can be assured that the use of StarTech® SFP products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a multitude of Gigabit networking devices. Ideal for use in switches, routers, and other networking equipment, the SFP provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The SFP supports single-mode fiber cable with a maximum distance of 10 km or 6.2 mi., and maximum data rates of up to 1.25Gbps. This GbE fiber SFP also supports Digital Diagnostics Monitoring (DDM / DOM). You can count on MASFP1GBLX10 for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco Meraki MA-SFP-1GB-LX10 guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1 W.Hot-swappable with fiber-optic modules
Add reliable and cost-effective 10 Gigabit Ethernet connections over multimode fiber with this SFP+ module. This StarTech® 10 Gigabit fiber SFP+ is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco Meraki switches and routers that support the Cisco Meraki MA-SFP-10GB-SR SFP+ transceiver module, as well as other major brands of networking equipment. The 10GBase-SR SFP+ delivers 10 Gigabit connectivity over multi-mode fiber cable with a range of up to 300 m (984 ft). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This 10 GbE SFP+ is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco and other major brands The 10 Gigabit multi-mode SFP+ is engineered to the highest quality standards and is 100% Cisco compatible, equivalent to the Cisco Meraki MA-SFP-10GB-SR SFP+ transceiver. The StarTech® SFP+ is configured and fully tested to ensure it works seamlessly with HP or other major brands of networking equipment. You can be assured that the use of StarTech® SFP+ products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber SFP+ transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a wide range of 10 Gigabit networking devices. Ideal for use in Cisco switches, routers and other networking equipment, the SFP+ optical transceiver provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The multi-mode fiber transceiver module supports Digital Diagnostics Monitoring (DDM), a maximum distance of up to 300 m (984 ft), and maximum data rates of up to 10Gbps. You can count on MASFP10GBSR for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco Meraki MA-SFP-10GB-SR guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.2 W.Hot-swappable with fiber-optic modules
Add reliable and cost-effective 10 Gigabit Ethernet connections over single-mode fiber with this SFP+ module. This StarTech® 10 Gigabit fiber SFP+ is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco Meraki switches and routers that support the Cisco Meraki MA-SFP-10GB-LR transceiver module, as well as other major brands of networking equipment. This 10GBase-LR SFP+ delivers 10 Gigabit connectivity over single-mode fiber cable with a range of up to 10 km (6.2 mi.). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This 10 GbE SFP+ is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco Meraki and other major brands This 10 Gigabit single-mode SFP+ is engineered to the highest quality standards and is 100% Cisco Meraki compatible, equivalent to the Cisco Meraki MA-SFP-10GB-LR SFP+ transceiver. The StarTech® SFP+ transceiver module is configured and fully tested to ensure it works seamlessly with Cisco Meraki or other major brands of networking equipment. You can be assured that the use of StarTech® SFP products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber SFP+ transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a wide range of 10 Gigabit networking devices. Ideal for use in Cisco Meraki switches, routers and other networking equipment, the SFP+ optical transceiver provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The SM fiber transceiver module supports Digital Diagnostics Monitoring (DDM), a maximum distance of up to 10 km (6.2 mi.), and maximum data rates of up to 10Gbps. You can count on MASFP10GBLR for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco Meraki MA-SFP-10GB-LR guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.2 W.Hot-swappable with fiber-optic modules
Add reliable and cost-effective Gigabit Ethernet connections over multimode fiber with this SFP module. This StarTech® Gigabit fiber SFP is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco switches and routers that support the Cisco Meraki MA-SFP-1GB-SX transceiver module, as well as other major brands of networking equipment. This 1000Base-SX SFP delivers Gigabit connectivity over multimode fiber cable, with a range of up to 550 m (1804 ft.). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This multimode SFP transceiver is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco Meraki and other major brands The MM Gigabit SFP is engineered to the highest quality standards and is 100% Cisco Meraki compatible, equivalent to the Cisco Meraki MA-SFP-1GB-SX SFP transceiver. The StarTech® SFP transceiver is configured and fully tested to ensure it works seamlessly with Cisco Meraki or other major brands of networking equipment. You can be assured that the use of StarTech® SFP products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a multitude of Gigabit networking devices. Ideal for use in switches, routers, and other networking equipment, the SFP provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The SFP supports multimode fiber cable with a maximum distance of 550 m or 1804 ft., and maximum data rates of up to 1.25Gbps. This GbE fiber SFP also supports Digital Diagnostics Monitoring (DDM / DOM). You can count on MASFP1GBSXST for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco Meraki MA-SFP-1GB-SX guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1 W.Hot-swappable with fiber-optic modules
StarTech SFP transceiver is a Meraki compatible copper transceiver module that has been designed, programmed and tested to work with Cisco Meraki brand switches and routers. It delivers dependable 1GbE (1000 Mbps) connectivity over copper cable, for 10BASE-T, 1000BASE-T and 100BASE-TX compliant networks, with a maximum distance of up to 328'..Cisco GLC-TE compatible copper transceiver module has been designed, programmed and tested to work with Cisco brand switches and routers.Dimensions: 0.5"H x 0.7"W x 2.7"D.Made of steel and comes in silver.Works with Cisco Meraki switches like MS225, MX400, MS250, MS350, MX84.Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link, and more that accept uncoded modules.Maximum data transfer rate: 1000 Mbps.Maximum transfer distance: 328'.MTBF: 4,655,371 hours.Power consumption: less than 1.3W.Hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.Lifetime manufacturer limited warranty
You May Also Like
Add reliable and cost-effective 10 Gigabit Ethernet connections over multimode fiber with this SFP+ module. This StarTech® 10 Gigabit fiber SFP+ is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco® switches and routers that support the Cisco SFP-10G-SR-S SFP+ transceiver module, as well as other major brands of networking equipment. This 10GBase-SR SFP+ delivers 10 Gigabit connectivity over multi-mode fiber cable with a range of up to 300 m (984 ft). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This 10 GbE SFP+ is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco and other major brands This 10 Gigabit multi-mode SFP+ is engineered to the highest quality standards and is 100% Cisco compatible, equivalent to the Cisco SFP-10G-SR-S SFP SFP+ transceiver. The StarTech® SFP+ is configured and fully tested to ensure it works seamlessly with HP or other major brands of networking equipment. You can be assured that the use of StarTech® SFP+ products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber SFP+ transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a wide range of 10 Gigabit networking devices. Ideal for use in Cisco switches, routers and other networking equipment, the SFP+ optical transceiver provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The multi-mode fiber transceiver module supports Digital Diagnostics Monitoring (DDM), a maximum distance of up to 300 m (984 ft), and maximum data rates of up to 10Gbps. You can count on SFP10GSRSST for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco SFP-10G-SR-S guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.3 W.Hot-swappable with fiber-optic modules
Add reliable and cost-effective 10 Gigabit Ethernet connections over copper, with this SFP+ module. This TAA compliant 10GBase-T SFP+ module delivers what you need most in your network connections: reliable performance. It's built to exacting MSA specifications and fully tested to ensure seamless compatibility. The RJ45 copper SFP+ transceiver module offers a cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Delivers 10 Gigabit Ethernet connections With data transfer rates of up to 10Gbps, this SFP+ module can be installed into networking equipment with an MSA compliant port and RJ45 copper interface. It delivers dependable 10 Gigabit connectivity over copper cable, for 10GBase-T compliant networks, with a maximum distance of up to 30 m (98.4 ft.)..Delivers reliable 10 GbE connections for 10GBASE-T compliant networks.StarTech® SFP modules are backed by a lifetime warranty.Uses a cost-effective cabling alternative to fiber-optic set ups.Complies with Multi-Source Agreement (MSA) industry standards.Hot-swappable with fiber-optic modules
Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.SFP+ with data networking application/usage for maximum productivity and usability
Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Gigabit Ethernet port for ultra-fast network speeds.Optical Fiber media support for a dependable and productive connectivity.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution.SFP (mini-GBIC) with data networking application/usage for reliability and maximum efficiency
This Cisco® SFP-10G-SR-S compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Cisco SFP-10G-SR-S Compatible.10GBase-SR SFP+ Transceiver.Media Type: MMF - Wavelength: 850nm - Reach: 300m - Connector Type: LC.100% application tested and guaranteed compatible.Limited Lifetime Warranty.Cisco® SFP-10G-SR-S Compatible TAA Compliant 10GBase-SR SFP+ Transceiver (MMF, 850nm, 300m, LC, DOM)
Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution.SFP+ with data networking application/usage for maximum productivity and usability
Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.SFP (mini-GBIC) with data networking application/usage for maximum productivity and usability
Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Up to 10x faster than standard Ethernet connection and provides high-performance.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.SFP (mini-GBIC) with data networking application/usage for maximum dependability and convenience
Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Optimize the network's performance with 10 Gigabit Ethernet connectivity.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building.SFP+ with data networking application/usage for reliability and maximum efficiency
Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Optimize the network's performance with 10 Gigabit Ethernet connectivity.Optical Fiber media support for a dependable and productive connectivity.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance
Startech.com® SFP+ Hot pluggable transceiver module sustain data rates up to 11.1 Gbps and DDM while it can be installed on any fiber networking cable. Module does not require any rebooting and support a distance of 300m..Interfaces/Ports: 1 x 10GBase-SR.Dimensions: 0.4inch(H) x 0.5inch(W) x 2.4inch(D).Compatibility: MSA compliant.Interfaces/ports details: 1 x LC female 10GBase-SR network.Wavelength: 850 nm.Fiber operating mode: half/full-duplex.Fiber type: Multi-mode.Maximum data rates up to 11.1 Gbps.Operating temperature: 0 to 70 deg c, storage temperature: - 40 to 85 deg c, operating humidity: 30 to 70% RH.Local unit connectors: 1 - fiber optic LC female.Warranty: 3 years limited.Startech.com® SFP+ Transceiver module is a compact set used for both telecommunication as well as data communication applications while it upgrades a 10Gb SFP+ multimode LC port on fiber media converter.
Add reliable and cost-effective Gigabit Ethernet connections over copper, with this SFP module. This 1000Base-TX SFP module delivers what you need most in your network connections: reliable performance. It's built to exacting MSA specifications and fully tested to ensure seamless compatibility. The RJ45 copper SFP transceiver module offers a cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Delivers Gigabit Ethernet connections With data transfer rates of up to 1Gbps, this SFP module can be installed into networking equipment with an MSA compliant port and RJ45 copper interface. It delivers dependable Gigabit connectivity over copper cable for 1000Base-TX compliant networks, with a maximum distance of up to 100 m (328 ft.)..Delivers reliable RJ45 Gigabit Ethernet connections for 1000Base-TX compliant networks.Meets or exceeds MSA (Multi-Source Agreement) industry standards.Backed by lifetime warranty and free lifetime technical support
The StarTech® SFP10GLRST 10 Gigabit fiber LC SFP+ transceiver module offers reliable 10 Gigabit Ethernet connections for 10GBase-LR compliant networks. This Gigabit SFP+ module ensures maximum performance and easily installs into Cisco® switches. This transceiver module measures 2.2" x 0.5" x 0.5" and is compatible with 10 Gigabit fiber networking equipment as well as media converters. It has aluminum construction with zinc-plated casing enclosure for added protection. It has LC duplex 10GBase-LR network port for connectivity and supports single-mode optical fiber media to transfer data at 10 Gbps up to a distance of 10 km..100% compatibility with Cisco SFP-10G-LR guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.3 W.Hot-swappable with fiber-optic modules
It installs in a Mini-GBIC compliant slot and features a duplex LC connector that is compatible with 850nm multi-mode fiber cables..Type of Product/Use: Transceiver.Dimensions/Size: 2.2 x 0.5 x 0.3 inch.True color: Silver.850nm Wavelength for Multi-Mode Fiber.Connectivity media: 62.5/125 microm multi-mode optical fiber, 50/125 microm multi-mode optical fiber.Max transfer distance: 721.78 ft 62.5/125 microm, 902.23 ft 62.5/125 microm, 1640.42 ft 50/125 microm, 1804.46 ft 50/125 microm optical fiber.Data transfer rate: 1 Gbps gigabit-ethernet.Transmitter spec: Power: -9.5 to -4 dBm, Receiver spec: sensitivity: -20 to -17dBm, Input power: -20 to -17 dBm.Stress sensitivity: 50/125 um: -13.5 dBm, 62.5/125 um: -12.5 dBm, Wavelength: 850 nm (850nm TYP., 830-860nm) MMF.Environmental condition: Operating temperature: 32 - 104 deg F, Storage temperature: -4 -158 deg F Operating humidity: 0% to 85% non-condensing.Modular bandwidth for MMF: 62.5/125um MMF at 160 MHz/km, up to 220m, 62.5/125um MMF at 200 MHz/km, up to 275m, 50/125um MMF at 400 MHz/km, up to 500m, 50/125um MMF at 500 MHz/km, up to 550m.Provides a simple way to add Gigabit functionality to your Linksys switch.Gigabit fiber is often-used to connect two switches together.Technology used depends on the distance between the two switches.SX module uses 850 nanometer wavelength light in multimode fiber-optic cables, and can achieve distances up to 220 or 550 meters, depending on the fiber used.The Gigabit Ethernet SX Mini-GBIC SFP Transceiver from Cisco is an expansion module that adds high-density fiber connectivity to compatible devices.
It installs in a Mini-GBIC compliant slot and features a duplex LC connector that is compatible with 850nm multi-mode fiber cables..Type of Product/Use: Transceiver.Dimensions/Size: 2.2 x 0.5 x 0.3 inch.True color: Silver.850nm Wavelength for Multi-Mode Fiber.The Gigabit Ethernet SX Mini-GBIC SFP Transceiver from Cisco is an expansion module that adds high-density fiber connectivity to compatible devices.
The Axiom SFP-10G-SR-AX SFP+ transceiver module supports fiber network connectivity using MMF. The transceiver transfers the data over this MMF at 10GBASE-SR data rate, with a maximum reach of up to 300 m using OM3 and up to 400 m using OM4, at 850 nm wavelength. The transceiver comes with pre-configured specific code to meet the requirements set forth by your router and switch OEMs. This SFP transceiver module is compatible with Cisco Catalyst 2960-S/2960-X/3560-X/3750-X series and Nexus 5000/7000 series..SFP+ transceiver transfers the data over multi-mode fiber.Dimensions: 0.5"H x 0.5"W x 2.2"D.Compatible with Cisco Catalyst 2960-S/2960-X/3560-X/3750-X series, Nexus 5000/7000 series.Network technology: 10GBASE-SR.Interfaces/Ports: 1 x LC.Wavelength: 850 nm.Range: 300 m using OM3 and up to 400 m using OM4.Ethernet technology: 10 Gigabit Ethernet.Media type supported: Multi-mode optical fiber.Form factor: Plug-in module.Eliminates any network communication conflicts and provides easy identification.Fully comply with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms.Meets SFP+ MSA, RoHS, IEEE 802.3z standards.Comes with limited lifetime warranty