Multimode Transceivers

This StarTech fiber optic transceiver is the direct equivalent to Cisco SFP-25G-SR-S for 25Gbps connectivity up to 100m (328') over LC-terminated Multimode Fiber (MMF) cable. The optical module has been programmed and tested for seamless integration with Cisco® switches and routers to ensure compatibility and reliability..Fiber optic transceiver is the direct equivalent to Cisco SFP-25G-SR-S for 25Gbps connectivity up to 328' over LC-terminated Multimode Fiber (MMF) cable.Enhance the networking infrastructure with this Cisco-compatible 25GBase-SR optical transceiver, ensuring reliable performance and seamless connectivity.Data transfer rate: 25Gbps.Short range capability facilitates low-latency and scalable onsite connections (up to 100 meters) within a data center or subnetworks within a building.Power consumption: 1.2W.MCA-compliant and compatible with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link, and other brands that support uncoded modules.Wavelength: 850nm.Excels in bandwidth-intensive tasks such as virtualization, efficient data migrations, high-performance storage, high-performance computing (HPC), future-proofing a network, and rapid online content uploads.Meets or exceeds RoHS, WEEE, CE, FCC standards.Lifetime manufacturer limited warranty

The AddOn transceiver module SFP+ allows you to transfer data at up to 1 Gbps through your Ethernet connection. The device is hot swappable, so you can plug it in or remove it without having to reset your system. The duplex LC connector interface works well with wired connections for a solid line to the network..Interfaces/ports: 1 x 1000Base-SX, 1 x LC 1000Base-SX.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: WS-SUP720, WS-SUP32 -8GE-3B, WS-SUP32 -10GE-3B, WS-X6724-SFP, WS-X6748-SFP.Connectivity technology: Wired.Connectivity media: 62.5/50 um multi mode fiber 1000Base-SX.Humidity: 0% - 95%.Operating temperature: 0 - 70 deg C.Digital diagnostic monitor interface compatible with SFF-8472.Hot pluggable.Data transfer rate: 1 Gb/s gigabit Ethernet.Duplex LC connector interface.Form factor: Hot-swappable.Application/usage: Data networking.2 years limited warranty.Monaural; choice of 3 wearing styles (over the head, over the ear and behind the neck).Noise-canceling microphone eliminates background noise and focuses on your voice.Convertible design.Multipoint.1-year mfr. limited warranty.Safety Data Sheet.AddOn Transceiver Module SFP+ - Hot-Swappable Data Networking

ACP's industry-standard 10Gbase-SR SFP+ is a hot-swappable input/output device that plugs into a gigabit Ethernet slot, linking the port with the fiber-optic network..Interfaces/ports: 1 x 10GBase-SR, 1 x LC/PC duplex 10GBase-SR network.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Cisco Nexus 5000 series, 7000 series switches.Connectivity technology: Wired.Connectivity media: 62.5 um, 50 um multi mode fiber 10GBase-SR.Humidity: 0% - 95%.Operating temperature: 32 -158 deg F.Enclosure type: Plug-in module.Data transfer rate: 10 Gb/s gigabit Ethernet.Form factor: Hot-swappable.Application/usage: Data networking.3 years limited warranty.Transceiver module compatible 10GBase-SR SFP+ sub watt power consumption and its excellent EMI performance allow system design with high port density.

Cisco 32Gbps fiber channel SFP+ transceiver provides fiber channel connectivity for 8/16/32-Gbps ports on the MDS 9000 family platform. Cisco fiber channel shortwave SFP+ offers 8/16/32-Gbps autosensing fiber channel connectivity..32Gbps shortwave fiber channel SFP+ transceiver provides fiber channel connectivity for 8/16/32Gbps ports on the MDS 9000 family platform.Dimensions: 0.33"H x 2.22"W x 0.53"D.Comes in silver.Wavelength: 850nm.Fiber type: MMF

Enable reliable fiber optic connections with this Netgear ProSafe AXM761 10GBASE-SR SFP+ Transceiver. This versatile short reach SFP optical transceiver is designed to deliver up to 10 Gb/s transfer speeds using multi-mode fiber cables with LC duplex connectors..Multimode fiber with an LC connector type for short-range 10 Gigabit Ethernet connectivity..Network Transceiver Type is SFP+, and it is used for providing short-range 10 Gigabit Ethernet connectivity over multimode fiber..Module supports a data transfer rate of 10 Gbps (10,000 Mbps) for high-speed connectivity..Provides connectivity up to 300 meters on OM3 fiber and up to 400–550 meters on OM4 fiber..Gigabit Ethernet SFP+ transceiver designed for 10 Gigabit Ethernet networks..Transceiver consumes less than 1 Watt of power, ensuring energy efficiency..Hot-swappable, allowing installation or removal without powering down the device..Module is MSA compliant, ensuring interoperability across multiple vendors..MTBF of over 1,000,000 hours, indicating high reliability and durability..Operates at a wavelength of 850 nm, suitable for short-range multimode fiber links..Product is sold as 1 unit (Each)..Data link protocol: 10 gigabit-ethernet.Adds 10 gigabit-ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfaces.Fits into the two built-in 10 GE SFP+ interfaces of GSM72xxPS / GSM73xxS.Fits into the 10 GE SFP+ interface of SFP+ Adapter module AX743.Certifications and standards: RoHS, UL 1950 CSA 22.2 No. 950.Netgear ProSafe SFP+ Transceiver fits into standard 10GB SFP+ interfaces and provides hot-swappable installation or removal.

Omnitron Pluggable optical transceiver operates at 850 nm wavelength and covers a maximum distance of up to 1800'. Transceiver is compatible with iConverter media converter modules, T1/E1 MUXes and network interface devices..Interfaces/ports: 1 x LC 1000Base-SX.Connectivity media: Multi-mode optical fiber.Ethernet technology: Gigabit Ethernet.Form factor: Plug-in module.Data rate: 1 Gbps.Cable distance: 550 meters.Wavelength: 850 nm.Application/usage: Data networking.Connectivity technology: Wired, Min. Tx Power (dBm): -9.5, Max. Tx Power (dBm): -4,Min. Rx Sense (dBm): -17, Max. Rx Power (dBm): -3, Link budget (dBm): 7.5.Low EMI metal enclosure, supports a wide variety of cable types.Digital diagnostic capability.Pluggable optical transceivers enable flexible fiber and copper connectivity.Warranty: Lifetime.Omnitron Pluggable optical transceiver transfers data at a rate of 1 Gb/s and enables a single network device to connect to a wide variety of fiber optic cable types.

The Cisco Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers high-density and low-power Ethernet connectivity for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The Cisco QSFP dual-rate bi-directional (BiDi) transceiver is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF)..Uses multimode fiber (MMF) as the fiber cable type and features a duplex LC optical connector for connectivity..QSFP transceivers enable high-speed 40G/100G Ethernet over multimode fiber using BiDi tech for short-reach data center connectivity..Supports data transfer rates of up to 100,000 Mbps (100 Gbps) and 40,000 Mbps (40 Gbps)..Maximum distance of 100 meters over OM4 or OM5 multimode fiber for 100G Ethernet and 150 meters over OM4 for 40G Ethernet..Supports 40 Gigabit Ethernet (40GbE) and 100 Gigabit Ethernet (100GbE) over multimode fiber using a duplex LC connector..Has a typical power consumption of approximately 3.5 watts..Hot-swappable, allowing it to be inserted or removed from a compatible device without powering down the system..MSA (Multi-Source Agreement) compliant, ensuring interoperability with other QSFP28-compliant devices across various platforms..Operates at two wavelengths: 855 nm and 908 nm, using short-range bidirectional optics over multimode fiber.

The Cisco 10GBASE-SR module supports link lengths up to 26m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). Using 2000MHz x km of MMF (OM3), it is possible to create link lengths up to 300m, and with 4700MHz x km MMF (OM4), link lengths up to 400m are possible..Multimode fiber optic transceiver with dual LC/PC connector.10GBASE SFP+ module for data center, enterprise wiring closet, and service provider transport applications.Provides data transfer rates up to 10Gbps.Supports link lengths up to 26m on standard FDDI-grade MMF; up to 300m on 2000MHz x km MMF (OM3); and up to 400m on 4700MHz x km MMF (OM4).Power consumption: 1W.Hot-swappable, plugs into an Ethernet SFP+ port.Compliant with the SFP+ MSA SFF-8431 standard.Wavelength: 850nm.Form factor: Hot-swappable.MSA compliant.Commercial temperature: 32 to 158 degrees Fahrenheit.Supports digital optical monitoring capability.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.1-year manufacturer limited warranty

The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver, and it supports up to 400m link length when uses 4700Mhz KM MMF (OM3). The 10GBase-SR SFP+ module offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver.Industry’s smallest 10G form factor for greatest density per chassis.Compatibility: Cisco nexus 5000 series Switches, cisco nexus 7000 series switches.Hot Pluggable.850nm VCSEL transmitter, PIN photo-detector.Maximum link length of 300m on 2000MHz/km MMF.Operating case temperature: 0 to 70 °C.Additional information: Spare product, distance 300 m.Form factor: Plug-in module.Application/usage: Data networking.90 days limited warranty.The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver. SFP+ transceiver module supports a link length of 26 m on standard fiber distributed data interface (FDDI)-grade multimode fiber (MMF).

The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver, and it supports up to 400m link length when uses 4700Mhz KM MMF (OM3). The 10GBase-SR SFP+ module offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver.Industry’s smallest 10G form factor for greatest density per chassis.Compatibility: Cisco nexus 5000 series Switches, cisco nexus 7000 series switches.Hot Pluggable.850nm VCSEL transmitter, PIN photo-detector.Maximum link length of 300m on 2000MHz/km MMF.Operating case temperature: 0 to 70 °C.Additional information: Spare product, distance 300 m.Form factor: Plug-in module.Application/usage: Data networking.90 days limited warranty.The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver. SFP+ transceiver module supports a link length of 26 m on standard fiber distributed data interface (FDDI)-grade multimode fiber (MMF).

The SBFTF Series is a stand-alone media converter that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Multimode fiber with ST connector for secure copper‑to‑fiber conversion..Stand‑alone Fast Ethernet media and rate converter bridging 10/100Base‑TX copper to 100Base‑FX fiber..Converts 10 Mbps and 100 Mbps Ethernet over copper to 100 Mbps Ethernet over fiber..Supports multimode fiber links up to 2,000 meters..Ethernet supported (10/100Base‑TX to 100Base‑FX), not Gigabit..Low operating consumption, typically 3 Watts..High reliability with MTBF around 1,000,000 hours..Operates at 1310 nm wavelength for multimode fiber transmission..Lifetime Limited Warranty

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Multimode fiber cable with LC connector for 1000Base‑SX Ethernet links..Media converter designed to extend Ethernet connectivity over multimode fiber for dependable short‑distance networking..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm..Backed by a lifetime warranty.

Cisco® Transceiver module features wired connective technology and has 1 x network - ethernet 1000Base-Sx - LC/PC multi-mode x 2 ports for cabling. Transceiver module is compatible with PC..Interfaces/ports: 1 x network - ethernet 1000Base-SX - LC/PC multi-mode x 2.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(L).Compatability: PC.Connectivity technology: Wired.Wavelength: 850 nm.Operating distance: 0.6 miles.Form factor: Plug in module, hot swappable.Fibre type: Multimode.Cabling type: 1000Base-SX.Cisco® GLC-SX-MMD= Transceiver Module has 1 x network - ethernet 1000Base-SX - LC/PC multi-mode x 2 ports.

The SBFTF Series is a stand-alone media converter that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Supports multimode fiber with an LC connector, enabling shorter‑range fiber transmission compared to single‑mode..An unmanaged stand‑alone Fast Ethernet media converter that bridges 10/100Base‑TX copper ports to 100Base‑FX multimode fiber ports..Operates at 10 Mbps or 100 Mbps, with automatic rate conversion for legacy copper devices..Extends network reach up to 2 km over multimode fiber..Designed for Fast Ethernet (100 Mbps) environments; not intended for Gigabit Ethernet..Lantronix converters are engineered for high reliability in continuous operation..Uses 1310 nm wavelength for multimode fiber transmission.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Multimode fiber cable with LC connector for 1000Base‑SX Ethernet connectivity..Media converter used to connect copper Ethernet devices with multimode fiber networks for short‑range transmission.Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm..Backed by a lifetime warranty.

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial deployments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).Power Consumption 4 Watts typical.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

Cisco™ BiDi Short-reach transceiver module with LC duplex 40GBase-X interface operates with 50 micrometer multi-mode optical fiber. Hot-swappable transceiver module with LC connectors can be used for data networking/optical network applications..Interfaces/ports: 1 x LC duplex 40GBase-X.Media & performance: 50 micrometer multi-mode optical fiber 40GBase-X.Ethernet technology: Gigabit Ethernet.Form factor: Hot-swappable.Data transfer rate: 40 Gbps.Connector: LC.Dimensions: 0.5"(H) x 0.7"(W) x 2.9"(D).Wavelength: 832 - 918 nm.Distance supported: 100/150 m.Compatibility: Cisco Nexus 9000 series switches.Power: 5 dBm transmit, 5 dBm receive, Power consumption: 3.5 W.Application/usage: Data networking, optical network.Gray.Operating temperature: -10 - +70 deg C.Certifications and standards:: RoHS-6, Green compliant.Warranty: 90 days limited.Cisco™ BiDi Short-reach transceiver module with LC duplex 40GBase-X interface transfers data at the rate of 40 Gb/s and is compatible with Cisco Nexus 9000 series switches.

Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Equipped with an LC connector, this device supports multimode fiber for reliable network connectivity..Media converter for extending Ethernet networks over fiber..Supports a data transfer rate of 1000 Mbps, equivalent to 1 Gbps, for high‑speed connectivity..Maximum transmission distance is up to 0.10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 5.40 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..LC‑terminated multimode fiber cable supporting 1000Base‑SX Ethernet connections..Media converter used to bridge copper Ethernet connections with multimode fiber networks for reliable short‑distance communication..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm..Backed by a lifetime warranty.

Cisco Transceiver module is compatible with Nexus 3000 series, Nexus 6500/7000 series, ASR 9000 series routers. Transceiver module suits MMF, 4-lanes, 850-nm wavelength, 12-fiber MTP/MPO connector..QSFP+ transceiver module is used for data center, high performance computing networks, enterprise core and distribution layers applications.Dimensions: 0.5"H x 0.7"W x 2.9"D.Interface/ports: 1 x MPO 40GBase-SR4 network.Maximum data transfer rate: 40 Gbps.Ethernet technology: 40 Gigabit Ethernet.Media type supported: Optical fiber, fiber mode supported: Multi-mode.Nominal wavelength: 850 nm, core size: 50 micron.Maximum transfer distance: 492', modal bandwidth: 500 MHz/km (OM2), 2000 MHz/km (OM3), 4700 MHz/km (OM4).Transmit power: -1 dBm per lane, receive power: 2.4 dBm.Compatible with Cisco Nexus 3064 switch, Nexus 2248PQ 10GE, ASR 9000 Series, 3016Q, 3064-E, 3064PQ, 3064-X, 6001.Form factor: Hot swappable.RoHS-6, MSA compliant.High-speed electrical interface compliant to IEEE 802.3ba.Cisco Transceiver module offers customers a wide variety of high-density and low-power 40GB Ethernet connectivity options for data center.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Uses multimode fiber with SC connector type..Media Converter for linking copper Ethernet to multimode fiber networks..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Equipped with an LC connector, this device supports multimode fiber for reliable network connectivity..Media Converter designed to convert copper Ethernet (RJ‑45) to fiber optic (LC), enabling extended network reach and dependable connectivity..Supports a data transfer rate of 1000 Mbps, equivalent to 1 Gbps, for high‑speed connectivity..Maximum transmission distance is up to 0.55 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 5.40 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial deployments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).Power Consumption 4 Watts typical.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

The E-100BTX-FX-05(HT) is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC).100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).4 Watts typical, low‑power industrial design.Requires power cycling for safe removal.1,400,000 hours reliability rating for rugged environments.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Equipped with an LC connector, this device supports multimode fiber for reliable network connectivity..Media Converter for bridging copper Ethernet to fiber networks..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.10 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 5.40 W of power during operation..Hot Swappable SFP fiber modules can be inserted or removed without powering down..Accepts industry‑standard MSA SFP transceivers for broad compatibility..Rated for approximately 250,000 hours of reliable operation.

The SBFTF Series is a that provides an interface between 10/100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into 10/100 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10Base-T copper devices to connect to 100Base-FX fiber..Uses multimode fiber with SC connector, ideal for short‑to‑medium distance Ethernet transmission..Stand‑alone Fast Ethernet media converter designed to bridge copper 10/100Base‑TX connections to fiber 100Base‑FX links..Supports 10 Mbps and 100 Mbps Ethernet speeds, automatically negotiating duplex modes for compatibility..Provides reliable multimode fiber connectivity up to 2,000 meters, suitable for building or campus networks..Fully compliant with Ethernet standards (10/100Base‑TX to 100Base‑FX), but does not support Gigabit speeds..Operates efficiently with typical power consumption around 3 Watts, minimizing heat and energy use..Offers high reliability with a Mean Time Between Failures of approximately 1,000,000 hours..Operates at 1310 nm wavelength optimized for multimode fiber transmission..Lifetime Limited Warranty

To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3..SFP+ module is perfect for data networking, optical network.Dimensions: 0.3"H x 0.5"W x 2.2"D.Compatible with A9K-16T/8-B=, ME-3600X-24FS-M=, ME-3600X-24TS-M, N7K-F132XP-15=, N7K-M132XP-12L, WS-X45-SUP7-E/2 networking products.Interface/ports: 1 x LC duplex 10GBase-LRM network.Media type supported: Optical fiber, fiber mode supported: Multi-mode, single-mode, Ethernet technology: 10 Gigabit Ethernet.Maximum data transfer rate: 10 Gbps.Form factor: Hot-swappable, plug-in module.Up to 980', fiber optic cable standard: 62.5 ohm m, 50 ohm m, wavelength: 1300nm.Supports link lengths of 220m on standard fiber distributed data interface (FDDI) grade multimode fiber (MMF).Temperature range: 32 - 158 deg F.Transmit power: -6.5 to 0.5 dBm.Receive power: -8.4(in average) and -6.4 (in OMA) - 0.5 dBm.Connectivity media: 62.5 um, 50 um multi-mode fiber 10GBase-LRM, single-mode fiber 10GBase-LRM.Power consumption: 1 W.Core size: 62.5 - G.652 microns.Cable distance: 220 - 300 m.Cable type: MMF and SMF.Transmit and receive wave length: 1260 - 1355nm.Compliant standards: IEEE 802.3ae, IEC 60825-1, laser class 1.Warranty: 90 days limited.10GBase-LRM SFP transceiver module supports link lengths of 220 m on standard fiber distributed data interface (FDDI) grade multimode fiber (MMF).

Stand-alone Gigabit Ethernet Media Converter 1000Base-T to 1000Base-SX/LX The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Compatible with multi‑mode fiber using LC connectors through SFP module..Gigabit Ethernet media converter for copper‑to‑fiber network extension..Supports a data transfer rate of 1000 Mbps, equivalent to 1 Gbps, for high‑speed connectivity..Maximum transmission distance is up to 0.10 km.Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 5.40 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

Stand-alone Gigabit Ethernet Media and Rate Converter 10/100/1000Base-T to 1000Base-SX/LX The SGFEB Series is a stand-alone media converter that provides an interface between 10/100/1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 10/100/1000 copper environments. Operating at Layer 2, the data link layer, this converter not only converts copper to fiber, it also provides rate conversion allowing legacy 10/100 copper devices to connect to 1000Base-SX/LX fiber..Uses multimode fiber with SC connector type..Media Converter for connecting copper Ethernet to multimode fiber networks..Delivers data transfer rates up to 1000 Mbps (1 Gbps)..Maximum transmission distance is up to 0.55 km..Gigabit Ethernet connectivity for high‑speed data transmission..Consumes 2.20 W of power during operation..Operates at a fiber optic wavelength of 850 nm.

The E-100BTX-HT Series is a Hardened Ethernet stand-alone media converter that provides an interface between 100Base-TX ports and 100Base-FX ports, allowing users to integrate fiber optic cabling into extreme 100Base-TX copper environments, by supporting an operating temperature range of -25°C to 65°C. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Multimode fiber with SC connector for 100Base‑FX links.Hardened Fast Ethernet media converter bridging copper (RJ‑45) to fiber (SC) in industrial environments.100 Mbps Fast Ethernet (IEEE 802.3u compliant).2,000 meters (2 km) over multimode fiber.Ethernet only, Fast Ethernet standard (not Gigabit).4 Watts typical, low‑power design for rugged deployments.1,400,000 hours reliability rating for extended service life.1310 nm standard for 100Base‑FX multimode fiber.Lifetime Limited Warranty

The Dell™ Networking 407-BBOU, SFP+ transceiver module provides 10GbE connectivity with a maximum reach up to 300 m, at a wavelength of 850 nm, using SR connector. This transceiver module is perfect for dell networking switches..SFP+ transceiver.Interfaces/port: LC duplex.Ethernet technology: 10 Gigabit Ethernet.Media type supported: Multi-mode optical fiber.Wavelength: 850 nm.Maximum data transfer rate: 10 Gbps.Operating range: 300 m.Compatibility: Networking N4000 N4032/N4000 N4032F/N4000 N4064/N4000 N4064F, N-Series N2024/N2024P/N2048/N3024/N3024F/N3024P, S5000.Form factor: Plug-in module.MSA, RoHS compliant.SFP+ transceiver provides 10GbE connectivity up to 300 m and is compatible with Networking N4000 N4032/N4000 N4032F/N4000 N4064.

HPE BladeSystem c-Class compatible SFP+ transceiver (455883-B21) supports up to 400m link lengths over OM4 MMF (300m over OM3 MMF) via an LC duplex connector. It is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae standards. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Featuring low power consumptionand and high speed, this 10G SFP+ transceiver is ideal for data centers, enterprise wiring closets, service provider transport applications, Radio & Baseband Units, etc..Interfaces/ports: 1 x 10GBase SR SFP+.Compatibility: PC.Connectivity technology: Wired.Data transfer rate: 10GB/s gigabit ethernet.Maximum transfer distance: 980'.Form factor: Plug in module.HP 10GBase-SR Optical Transceiver Module - PC Compatible

The Dell™ 407-BBOR SFP mini-GBIC network transceiver is perfect for data networking and optical network applications. It features one LC duplex 1000Base-SX network interface and supports Gigabit Ethernet technology for high-speed data transmission. This network transceiver transmits data at a rate of 1 Gbps. It offers data transmission over multi mode optical fiber media up to a range of 550 m at 850 nm wavelength. This transceiver is compatible with Dell Networking N2048, N4000, N4032F, N4064F, N2024P switches, Dell PowerConnect 2848, 5524P, 5548p, 6224F, 6248P and 7024F switches..SFP network transceiver for data networking and optical network applications.Interfaces/ports: One LC duplex 1000Base-SX network.Data transfer rate: 1 Gbps.Ethernet technology: Gigabit Ethernet.Wavelength: 850 nm.Media type supported: Multi-mode optical fiber.Compatibility: Dell Networking N2048, N4000, N4032F, N4064F, N2024P switches, Dell PowerConnect 2848, 5524P, 5548p, 6224F, 6248P, 7024F switches.Max transfer distance: 550 m

Startech.com® SFP+ Hot pluggable transceiver module sustain data rates up to 11.1 Gbps and DDM while it can be installed on any fiber networking cable. Module does not require any rebooting and support a distance of 300m..Interfaces/Ports: 1 x 10GBase-SR.Dimensions: 0.4inch(H) x 0.5inch(W) x 2.4inch(D).Compatibility: MSA compliant.Interfaces/ports details: 1 x LC female 10GBase-SR network.Wavelength: 850 nm.Fiber operating mode: half/full-duplex.Fiber type: Multi-mode.Maximum data rates up to 11.1 Gbps.Operating temperature: 0 to 70 deg c, storage temperature: - 40 to 85 deg c, operating humidity: 30 to 70% RH.Local unit connectors: 1 - fiber optic LC female.Warranty: 3 years limited.Startech.com® SFP+ Transceiver module is a compact set used for both telecommunication as well as data communication applications while it upgrades a 10Gb SFP+ multimode LC port on fiber media converter.

The Omnitron miConverter™ 1239-0-1 miniature transceiver/fiber media converter supports 1000Base-X, 1000Base-BX-D, 1000Base-T, 1000Base-ZX, 1000Base-BX10-U, 1000Base-BX and 1000Base-LX/SX networks. This SFP-type converter enables easy adaptability to different fiber types and supports CWDM technology to increase the bandwidth of fiber infrastructure with speed and distance. It facilitates a plug-and-play option with multi-mode and single-mode optical fiber..Transceiver/media converter supports 10BASE-T, 100BASE-TX, 1000BASE-T, 1000BASE-X and the IEEE 802.3 network specifications.Dimensions: 0.84"H x 1.71"W x 4.1"D.Interfaces/port: 1 x Network (RJ-45), 1 x SFP.Ethernet technology: Ethernet, Fast Ethernet, Gigabit Ethernet.Media type supported: Twisted pair, optical fiber, Network technology: 1000Base-X, 1000Base-BX-D, 1000Base-T, 1000Base-ZX, 1000Base-BX10-U.Form factor: Rack-mountable, desktop, external, wall mountable.Power: 100-240 VAC/60 Hz, 5-12 VDC via 2.5 mm barrel input voltage.Jumbo frame support: Up to 10240 bytes, MTBF: 250000 hours.Supports MDI/MDIX auto-crossover, cost-effective mounting and proven solution.Includes US power supply - 120-240 V/50-60 Hz, velcro strip, user manual.Meets RoHS, WEEE, UL, CE, FCC Class A standards.Comes with lifetime warranty

The Transition Networks® TN-GLC-SX-MM 1000Base-SX Gigabit Ethernet SFP transceiver module is suitable for Gigabit Ethernet switches and routers, fiber channel switch infrastructure, xDSL applications and metro edge switching. This hot pluggable transceiver module with LLC 1000Base-SX interface, transfers data at the rate of 1.25 Gbps up to 550 m distance over multi-mode fiber media at a wavelength of 850 nm. This transceiver module helps to install in any SFP port allowing for 1000Base-SX interface to the network through the SFP connector..Hot-pluggable SFP transceiver module is suitable for Gigabit Ethernet switches, routers, fiber channel switch infrastructure and xDSL applications.Dimensions: 0.33"H x 0.52"W x 2.18"D.Supports multi-mode fiber (MMF) connection media.Interfaces/ports: One LC 1000Base-SX.Ethernet technology: Gigabit Ethernet.Maximum data transfer rate: 1.25 Gbps.Reach: 550 m.Wavelength: 850 nm.Media type supported: Optical fiber.Link budget: 8.5 dB.Power: 3.3 V, Power consumption: 0.66 W.Temperature range: 0 - 70 deg C operating, 40 - 85 deg C storage.Fiber optic cable standard: 62.5/125 u m, 50/125 u m.SFP footprint LC optical transceiver.Has been designed to install in any SFP port while allowing for 1000Base-SX interface to the network through the SFP connector.Meets MSA, IEC-60825, FDA 21, CFR 1040.10 and 1040.11, IEEE 802.3 2003, ANSI X3.297-1977 certifications and standards.Comes with lifetime warranty

The StarTech® GLCSXMMDSTT SFP network transceiver module supports fiber optic network connectivity using GbE technology. This transceiver module provides 1000Base-SX network connectivity for data networking and optical network applications. It transfers the data over optical multi-mode fiber with a maximum reach of up to 550 m, at a wavelength of 850 nm using LC female duplex connector. This easy to install transceiver is compatible with Cisco modules. The transfer module features digital optical monitoring (DOM) support that allows you to access real time operating parameter..100% compatibility with Cisco GLC-SX-MMD guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1 W.Hot-swappable with fiber-optic modules

HPE J9150D Compatible SFP+ Module - 10GBASE-SR - 10GbE MMF Optic Transceiver - 10GbE SFP+ - LC 300m - 850nm - DDM HPE FlexFabric, 6120XG, 6120G (J9150D-ST).100% HPE J9150D COMPATIBLE: Works with HPE switches like FlexFabric, 6120XG, 6120G, , and others.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself - not the life of your switch. Our modules won't void your OEM warranty and supported by our Tech Advisors 5/24.TECHNICAL SPECS: 10GBASE-SR | 10Gbps | Multi Mode (MMF) | LC Connector | 850nm | Digital Diagnostic Monitoring (DDM) | Distances up to 300m (984ft).TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in HPE routers and switches; DDM support reports the transceiver's status to most SNMP network management tools.WORKS WITH MSA COMPLIANT SWITCHES: Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules.10 Gbps | Multi Mode Fiber | LC | 300 m (984 ft) | Lifetime Warranty

The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..1000Base‑SX/LX fiber, SC connector (multimode or single‑mode supported).Stand‑alone Gigabit Ethernet Media Converter, bridges 1000Base‑T copper to 1000Base‑SX/LX fiber.Data Transfer Rate: 1000 Mbps (1 Gbps).Up to 550 m on multimode (SX); up to 10,000 m (10 km) on single‑mode (LX).Gigabit Ethernet supported (1000Base‑T to 1000Base‑SX/LX).Power Consumption 3 Watts (typical).850 nm (SX multimode), 1310 nm (LX single‑mode).Lifetime Limited Warranty

The SGETF Series is a stand-alone media converter that provides an interface between 1000Base-T ports and 1000Base-SX/LX ports, allowing users to integrate fiber optic cabling into 1000Base-T copper environments. Operating at Layer 1, the physical layer, data is passed through the converter at line speed, making it ideal for applications where low latency is essential..Supports 1000Base‑SX multimode fiber with a standard SC connector, ensuring compatibility with widely used fiber cabling systems in enterprise and campus networks..Operates as a stand‑alone Gigabit Ethernet Media Converter that bridges 1000Base‑T copper ports to 1000Base‑SX fiber ports.Provides a full 1000 Mbps (1 Gbps) data throughput, delivering high‑speed connectivity.Extends network reach up to 550 meters over multimode fiber, making it ideal for medium‑range deployments.Fully compliant with Gigabit Ethernet standards, supporting 1000Base‑T to 1000Base‑SX conversion.Consumes approximately 3 Watts of power, offering energy‑efficient operation.Built to meet Multi‑Source Agreement (MSA) standards, ensuring compatibility with industry‑standard fiber component.Engineered for durability with a Mean Time Between Failures (MTBF) exceeding 250,000 hours.Operates at 850 nm wavelength for multimode fiber, the industry standard for 1000Base‑SX applications,.Lifetime Limited Warranty

The Transition Networks® M/E-PSW-FX-02-NA mini fast Ethernet transceiver/media converter offers entry-level media conversion of 10/100Base-TX to 100Base-FX covering 2 km over MM(ST) at 1300 nm. This media converter offers easy deployment with its fixed configuration. The plug-and-play convenience helps you in expanding your network connections. This converter features auto-negotiation, auto-MDI/MDIX and automatic link restoration. The unit and port LED allows you to access the network status information..Dimensions: 0.85"H x 1.8"W x 3.3"D.Interfaces/ports: 1 x 10/100Base-TX (RJ-45), 1 x 100Base-FX.Media type supported: Multimode fixed full-duplex on fiber.Ethernet technology: Fast Ethernet.Data transfer rate: 100 Mbps, Wavelength: 1300 nm.Maximum transfer distance: 100 m/2 km.Form factor: Wall mountable, external.Wired connectivity.Temperature: 0 to 50 deg C (operating), -15 to 65 deg C (storage), humidity: 5 to 95 % (non-condensing).DC input: 12 VDC, power consumption: 2.6 W.Unit and port LEDs allow for quick status information, connect to legacy network equipment.Auto-negotiation, auto-MDI/MDIX.Automatic link restoration, far-end-fault (FEF), eliminate collision domains.Meets UL Listed, cUL Listed (Canada), FCC Class A, CISPR22/EN55022, Class A, EN55024, CE Mark standards.Weight: 2 lbs..Comes with lifetime warranty

The Cisco small form-factor pluggable portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor..Transceiver module for MMF.Pull tab comes in beige.Supports a link length of 70/100m on OM3/4 MMF.Requires RS-FEC on the host ports.Maximum power consumption: 1.2W.Wavelength: 850nm.Cable type: MMF.Core size: 50 microns.Modal bandwidth: 2000 OM3/4700 OM4/4700 OM5 on 70/100/100m cable distances.Support FCoE with the appropriate host s/w support.5-year manufacturer limited warranty

Netgear® ProSafe® AXM763 LC Duplex Gigabit Ethernet SFP+ Transceiver for M5300 Switches.Suitable with M5300, M7100 and M7300 series Managed Switches, SFP+ interfaces of select smart and plus switches.Comes in silver color.Interface/ports: One LC duplex 10GBase-LRM network, SFP+ slot.Media type supported: Optical fiber, Fiber mode supported: Multi-mode, Cable standard: 50/125 u m, 62.5/125 u m.Ethernet technology: 10 Gigabit Ethernet, 10GBase-LRM.Data transfer rate: 10 Gbps, Transfer distance: 853' max.Form factor: Plug-in module

HPE is the global edge-to-cloud company built to transform your business. How? By helping you connect, protect, analyze, and act on all your data and applications wherever they live, from edge to cloud, so you can turn insights into outcomes at the speed required to thrive in today's complex world..25Gbps SFP28 transceiver provides network speeds up to 25Gbps for connections up to 100m.Dimensions: 0.47"H x 2.19"W x 0.54"D.Comes in silver.Includes an LC connector for attaching a multimode duplex fiber optical cable.Allows power dissipation up to 3.5W

This Cisco® SFP-10G-SR-S compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Cisco SFP-10G-SR-S Compatible.10GBase-SR SFP+ Transceiver.Media Type: MMF - Wavelength: 850nm - Reach: 300m - Connector Type: LC.100% application tested and guaranteed compatible.Limited Lifetime Warranty.Cisco® SFP-10G-SR-S Compatible TAA Compliant 10GBase-SR SFP+ Transceiver (MMF, 850nm, 300m, LC, DOM)

The StarTech® J4858C10PKST SFP (mini-GBIC) transceiver module supports half/full duplex multi mode fiber optic network connectivity. The transceiver module transfers the data over MMF at 1.25-Gbps speed, with a maximum reach up to 550 m at a wavelength of 850 nm using LC connector. This hot pluggable transceiver module provides highly reliable and cost-effective GbE network connections for 1000Base-SX networks and supports digital diagnostic monitoring..100% compatibility with HP J4858C guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1 W.Hot-swappable with fiber-optic modules.SFP network transceiver module is ideal for large-scale deployments or installations on multiple devices, this bulk pack of HP compatible gigabit fiber SFPs.

This Ethernet fiber media converter offers an easy, cost-effective way to extend your network over fiber, using the SFP+ of your choice. It converts a copper RJ45 Ethernet connection to 10 Gigabit fiber, to extend your network over longer distances or connect workstations to switches. Cost-Effective Extensions and Flexible Performance : The RJ45 to fiber media converter provides a cost-efficient way to connect an Ethernet network to remote devices over a fiber backbone. It features an open SFP+ slot that supports the MSA-compliant 10 Gigabit SFP+ that best suits your fiber connection setup (single mode/multimode) and distance requirements. A Versatile Way to Connect Different Networks: The 10Gb fiber media converter supports auto-negotiation while providing versatile connectivity to existing networks and devices, maximizing the usage and performance of legacy equipment. Network Compatibility: 10GBASE-ER. 10GBASE-LR. 10GBASE-LW. 10GBASE-EW. 10GBASE-R. 10GBASE-SR. 10GBASE-SW. 10GBASE-T. Fast and Easy Installation: The unmanaged fiber media converter has a standalone compact design with simple plug-and-play setup to ensure fast and easy installation. StarTech.com Fiber Media Converters: Overcome the distance limitations of traditional network cables with StarTech.com fiber media converters. Our converters connect different types of network cabling and help you extend networks between buildings and over longer distances. Whether you need to extend a network connection 550 m or 40 km, we can help you. The MCM10GSFP Ethernet Fiber Media Converter is backed by a StarTech.com 2-year warranty and free North American based multilingual lifetime technical support..Convert between an RJ45 copper Ethernet connection and a fiber-optic connection to extend your network cost-effectively.Customize the network extension distance to your requirements with virtually any MSA-compliant multimode or single-mode transceiver using the open 10Gb SFP+ slot.10Gbps (10GBASE-T) compatible RJ45 port supports auto-negotiation.Install easily with compact and durable standalone design

Add reliable and cost-effective 10 Gigabit Ethernet connections over multimode fiber with this SFP+ module. This StarTech® 10 Gigabit fiber SFP+ is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco® switches and routers that support the Cisco SFP-10G-SR-S SFP+ transceiver module, as well as other major brands of networking equipment. This 10GBase-SR SFP+ delivers 10 Gigabit connectivity over multi-mode fiber cable with a range of up to 300 m (984 ft). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This 10 GbE SFP+ is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco and other major brands This 10 Gigabit multi-mode SFP+ is engineered to the highest quality standards and is 100% Cisco compatible, equivalent to the Cisco SFP-10G-SR-S SFP SFP+ transceiver. The StarTech® SFP+ is configured and fully tested to ensure it works seamlessly with HP or other major brands of networking equipment. You can be assured that the use of StarTech® SFP+ products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber SFP+ transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a wide range of 10 Gigabit networking devices. Ideal for use in Cisco switches, routers and other networking equipment, the SFP+ optical transceiver provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The multi-mode fiber transceiver module supports Digital Diagnostics Monitoring (DDM), a maximum distance of up to 300 m (984 ft), and maximum data rates of up to 10Gbps. You can count on SFP10GSRSST for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco SFP-10G-SR-S guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.3 W.Hot-swappable with fiber-optic modules