NETGEAR 10G Switches

Introducing the NETGEAR MS510TXUP Multi-Gigabit/10G Ethernet Ultra60 PoE++ Smart Switch with 2 SFP+ Ports and 295W PoE budget for WiFi 6 Access Point connectivity and power..Four 1G/2.5G Ethernet ports and Four Multi-Gig/10G Ethernet ports.8 PoE++ ports with 295W total power budget.2 x 10G SFP+ ports.Management software with easy-to-use GUI interface offers secure setup, access, and SNMP (NMS 300) management. Includes NETGEAR Insight to remotely manage your networks from anywhere..Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.Reduces fan noise to protect your home office or business environment..Covered by ProSAFE, an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..Dimensions in Inches: 13L x 8.12W x 1.7H; Weight in Pounds: 5.5.Insight Cloud Management, Desktop/Rackmount, ProSAFE Lifetime Protection

The NETGEAR XS512EM Plus Switch is designed for desktop or rackmount and features 12-Ports of 100M/1G/2.5G/5G/10G Multi-Gigabit Ethernet, 2 x 10G SFP+ ports (2 are shared), ProSAFE Lifetime Protection and more..12 Multi-gig/10G Ethernet ports.2 x 1G/10G SFP+ ports (both are shared).Management software with easy-to-use GUI interface offers basic capabilities to configure, secure, and monitor your network..Supports desktop or rackmount placement, and includes all the necessary mounting hardware in the box.Reduces fan noise to protect your home office or business environment..Covered by an industry-best Lifetime Limited Hardware Warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert.Designed to optimize power usage lowering its cost to operate. Most models are compliant with IEEE802.3az Energy Efficient Ethernet mode..Every NETGEAR Network switch is rigorously tested for reliability, quality, and performance..NETGEAR Plus Switch

NETGEAR introduces the XS508M, the first 8-port 10-Gigabit/Multi-Gigabit Ethernet Switch with 1 SFP+ port for Home and Business with 1G/2.5G/5G/10G per port flexible connectivity. Each of the 4 Ethernet ports automatically detects which speed is needed by the connected device and provides the adequate connection speed. Modern, high-performance network devices such as 5G network cards, gamer PCs, desktop PCs, servers, NAS storage or AC Wave 2 Wireless Access Points now come with 2.5-Gigabit or 5-Gigabit connectivity. In order to benefit from the full potential of these high-speed devices, performance and coverage, the NETGEAR XS508M Multi-speed capabilities are THE solution for plug-and-play flexible connectivity for your modern business or home..Unmanaged switch provides eight ports with multi-gigabit connectivity to your devices.Expand your network instantly, and provide your devices with either 100Mbps, 1G, 2.5G, 5G, or 10G data transfer rate automatically.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the CE: CB 60950-1, LVD 60950-1, AUS/NZ: AS/NZS 60950-1, USA: UL 60950-1, SNE VA and Taiwan: BSMI (CNS 14336-1) standards.One SFP+ fiber port offers 1G/10G connectivity or high-speed uplink connectivity to your core network.Switch is whisper-quiet due to an active fan.Simple setup with no software or configuration needed.Durable metal case and long product life (shown by MTBF numbers).Certifications and standards: CB mark, UL/cUL Listed, IEC, AS/NZS, Russia EAC mark.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.

NETGEAR introduces the XS508M, the first 8-port 10-Gigabit/Multi-Gigabit Ethernet Switch with 1 SFP+ port for Home and Business with 1G/2.5G/5G/10G per port flexible connectivity. Each of the 4 Ethernet ports automatically detects which speed is needed by the connected device and provides the adequate connection speed. Modern, high-performance network devices such as 5G network cards, gamer PCs, desktop PCs, servers, NAS storage or AC Wave 2 Wireless Access Points now come with 2.5-Gigabit or 5-Gigabit connectivity. In order to benefit from the full potential of these high-speed devices, performance and coverage, the NETGEAR XS508M Multi-speed capabilities are THE solution for plug-and-play flexible connectivity for your modern business or home..Unmanaged switch provides eight ports with multi-gigabit connectivity to your devices.Expand your network instantly, and provide your devices with either 100Mbps, 1G, 2.5G, 5G, or 10G data transfer rate automatically.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.Meets or exceeds the CE: CB 60950-1, LVD 60950-1, AUS/NZ: AS/NZS 60950-1, USA: UL 60950-1, SNE VA and Taiwan: BSMI (CNS 14336-1) standards.One SFP+ fiber port offers 1G/10G connectivity or high-speed uplink connectivity to your core network.Switch is whisper-quiet due to an active fan.Simple setup with no software or configuration needed.Durable metal case and long product life (shown by MTBF numbers).Certifications and standards: CB mark, UL/cUL Listed, IEC, AS/NZS, Russia EAC mark.Lifetime manufacturer limited warranty.Plug-and-play Switches for Businesses in Need of Instant Connectivity.

The Netgear® ProSAFE® GSM4352S-100NES 48-port managed Ethernet switch is been specially designed for server aggregation with Auto-iSCSI prioritization, wireless access, unified communications and IP video. This stackable switch delivers IPv4/IPv6 rich services for mid-enterprise edge and SMB core. The stacking and distributed link aggregation feature of this switch allows for multi-resiliency with zero downtime and load balancing capabilities. This switch incorporates new link dependency feature that enables or disables ports based on the link state of different ports. The layer 3 feature set of this switch includes static and policy-based routing, RIP, VRRP, OSPF and multicast PIM dynamic routing..Managed Ethernet switch controls LAN traffic.Dimensions: 1.73"H x 17.32"W x 12.2"D.Compatibility: PC.Color: Black.Layer supported: 2.Interfaces/ports: 48 x 1G RJ45, two 10GBASE-T (Fast Ethernet, 1G and 10G speeds), two SFP+ (1G and 10G speeds).Remote management: CLI, HTTPS, SNMP, SSH, Telnet, Routing protocol: IGMP, IGMPv2, IGMPv3, MLDv2, OSPF, PIM-DM, PIM-SM, RIP, VRRP.Authentication method: RADIUS, TACACS+.Input voltage: 120 - 230 VAC, Power consumption: 47.4 W.Form factor: Rack-mountable.Switching capacity: 176 Gbps.Has cost effective 1G access layer in campus LAN networks and high performance 10G distribution layer for midsize organizations networks.Features innovative mixed "Spine and Leaf", 1G and 10G stacking with non-stop forwarding and hitless failover redundancy.SDN-Ready OpenFlow 1.3 support for maximum investment protection.Service port is great for out-of-band Ethernet management (OOB).Weight: 10.81 lbs..Comes with lifetime warranty

The Netgear M4300-48X switch delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge and SMB core deployments with unrivaled ease of use. Nonstop forwarding (NSF) virtual chassis architecture provide advanced High Availability (HA) with hitless failover across the stack. Intelligent Netgear IGMP Plus multicast allows for scalable Pro AV installations at Layer 2 without the PIM complexity. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing – as standard. The Netgear M4300 Switch Series is perfect for wireless access, unified communications and professional AV-over-IP installations. Netgear Intelligent Edge Switch solutions combine latest advances in hardware and software engineering for higher flexibility, lower complexity and stronger investment protection, at a high-value price point..Stackable managed switch for midsize organization networks.Features 48 x 10GBASE-T (RJ-45), 4 x 10GBASE-X (SFP+) shared ports, out-of-band 1G Ethernet management port, Mini-USB and RJ45 RS232 console ports, USB storage port.960Gbps non-blocking fabric across 48 ports.Dimensions: 1.73"H x 17.32"W x13.58"D.Maximum power consumption: 237.2W.Full-width form factor with one-unit rack mount kit.Full L3 feature set and nonstop forwarding (NSF) stacking.Ships with one modular APS250W PSU in first power supply slot.Ship with a blank cover in the second power supply slot.Low acoustics (40.3dB at 77 degrees Fahrenheit).Lifetime manufacturer limited warranty

The Netgear® ProSAFE® GSM4352S-100NES 48-port managed Ethernet switch with full PoE+ provisioning, is been specially designed for server aggregation with Auto-iSCSI prioritization, wireless access, unified communications and IP video. This stackable switch delivers IPv4/IPv6 rich services for mid-enterprise edge and SMB core. The stacking and distributed link aggregation feature of this switch allows for multi-resiliency with zero downtime and load balancing capabilities. This switch incorporates new link dependency feature that enables or disables ports based on the link state of different ports. The layer 3 feature set of this switch includes static and policy-based routing, RIP, VRRP, OSPF and multicast PIM dynamic routing..Managed Ethernet switch controls LAN traffic.Dimensions: 1.73"H x 17.32"W x 15.28"D.Compatibility: PC.Color: Black.Layer supported: 3.Interfaces/ports: 48 x PoE+ 1G RJ45, two 10GBASE-T (Fast Ethernet, 1G and 10G speeds), two SFP+ (1G and 10G speeds).Remote management: CLI, HTTPS, SNMP, SSH, Telnet, Routing protocol: IGMP, IGMPv2, IGMPv3, MLDv2, OSPF, PIM-DM, PIM-SM, RIP, VRRP.Authentication method: RADIUS, TACACS+.Input voltage: 120 - 230 VAC, Power consumption: 865 W.Form factor: Rack-mountable.Switching capacity: 176 Gbps.Has cost effective 1G access layer in campus LAN networks and high performance 10G distribution layer for midsize organizations networks.Features innovative mixed "Spine and Leaf", 1G and 10G stacking with non-stop forwarding and hitless failover redundancy.SDN-Ready OpenFlow 1.3 support for maximum investment protection.Service port is great for out-of-band Ethernet management (OOB).Weight: 14.44 lbs..Comes with lifetime warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 12x 2.5Gbps Ethernet and 2x 10Gbps SFP+ ports engineered for 1Gb AV over IP.100Gbps (10/100/1000/2500Mbps) line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

The Netgear M4350-24F4V Series is a 1RU layer 3 managed switch with 24x 10GBASE-X SFP+ ports and 4x 25GBASE-X SFP28 uplinks. Equipped with one slot for modular power supply (1+1 redundancy). Supports Virtual Chassis stacking provides non-stop forwarding (NSF) and hitless failover, NETGEAR IGMP Plus, AV User Interface, and Engage Controller speed up AV installations..Layer 3 managed switch with 24 x 10GBASE-X SFP+ ports with 4 25GBASE-X SFP28 uplinks.1/10/25G Gigabit Ethernet line rate ensures congestion-free connectivity to your devices.1U height allows to mount it to your rack.Flexible management via easy-to-use web browser based management.Equipped with one slot for modular power supply (one-plus-one redundancy).Lifetime manufacturer limited warranty

This AV Line of M4250 switches with out-of-the-box functionality and an industry-first: a concurrent second user interface solely designed with the AV Pro in mind.NETGEAR has enhanced the experience for AV professionals by including an upgraded user interface designed from the ground up. Pro AV customers don't have to settle for an IT-centric interface with settings and IT-specific functionality they will never need. The upgraded M4250 AV interface presents the common AV controls right up front with user-selectable profiles for common AV platforms making it a snap to ensure the settings are correct for a specific audio or video application. When each M4250 is simply configured with AV profiles on certain ports, the AV Line offers automatic and dynamic configuration of multiple M4250 switches connected together. This automatic configuration, known as Auto-LAG and Auto-Trunk, combined with as NETGEAR IGMP Plus, make setting up a complicated AV over IP network easier and quicker than ever before..Layer 3 managed switch with 16x 10Gbps SFP+ ports (first 12 ports support 1Gbps) engineered for 1Gb AV over IP.320Gbps line rate fabric ensures congestion-free connectivity to your devices.Install your switch on your desktop, or mount it to your wall or rack with the hardware provided in the box.Quality of Service (QoS) for traffic prioritization.Flexible management via easy-to-use web browser based management GUI.Energy-efficient Ethernet (IEEE 802.3az) for maximum power savings.NETGEAR IGMP Plus provides multicast functionality right out of the box for most AV over IP applications.Sleek, quiet design ensures less noise.Auto-trunk and auto-LAG functionality auto connects with other M4250 (and M4300) switches.A streamlined interface enables factory default AV settings or user-specified AV profiles to be assigned to individual ports with just a few clicks.Box includes: Ethernet switch, power cord, console USB Type-C and RJ45-DB9 cables, rack-mounting standard brackets, longer brackets for recessed mounting, rubber footpads for tabletop installation, and an installation guide.Lifetime manufacturer limited warranty

The Netgear® XSM4316S-100NES ProSAFE® M4300 series intelligent edge managed GbE switch is a stackable L3 managed 8-port GbE switch that comes with 10G and 1G models in a variety of form factors and PoE+ full provisioning. The design of this switch is perfect for full power PoE+ edge, redundant top of rack server/storage interconnect and for dependable SMB core deployment. The switch offers you an innovative mixed spin and leaf, 1G and 10G stacking with non-stop forwarding and hitless failover redundancy. Stacking and distributed link aggregation allows for multi-resiliency with zero downtime and load balancing capabilities..Managed switch delivers robust performance and intelligent switching.Compatible with PC.Comes in black color.Interface/ports: 8 x 10/100/1000/10000.Expansion slots: 8 x SFP+ 10 Gigabit.Switching capacity: 320 Gbps.Layer supported: Layer 3.Ethernet technology: Gigabit Ethernet, 10 Gigabit Ethernet, network technology: 10GBase-T, 10GBase-X, 1000Base-T, 1000Base-X.Remote management protocol: CLI, HTTPS, SNMP, SSH, Telnet, routing protocol: IGMP, IGMPv2, IGMPv3, MLDv2, OSPF, PIM-DM, PIM-SM, RIP, VRRP.Power: 120/230 VAC, 250 W.Authentication method: RADIUS, TACACS+.Form factor: Rack mountable