Network Converters

Lantronix® UD1100002-01 1-Port Device server enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet. On-board Flash memory offers room for future system software upgrades and maintenance-free, non-volatile web page storage. The built-in web server enables users to access and configure this server from a standard web browser..Measures 0.9"H x 2.5"W x 3.5"D.Runs on Lantronix DSTNI-EX 48 MHz processor for reliable performance.Has 256KB SDRAM with 2MB flash memory for optimum storage.Has 1 port for easy connectivity.Supports 7 or 8 data bit characters, 1 or 2 stop bits and odd, even, none parity.Supports RS232, RS422 or RS485 modes, 300 to 921.6 kbps data rates and has 2 DB9 DTE serial ports for connectivity.Has 1 x Network (RJ-45), 1 x parallel ports for easy connectivity.Operates with 10Base-T/100Base-T interface at a speed of 10/100/Auto Mbps with the aid of RJ45 connector.Supports protocols like ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, SNMP TCP, UDP and Telnet, TFTP, RFC2217.Power supply is rated at 100 - 240 VAC, 1.8 W max.Supports wall-mountable form factor.Supports Windows 98/ME/NT/2000/XP/Vista (32-bit versions) DeviceInstaller configuration software.Box includes UD1100002-01 device server, power adapter, DeviceInstaller Software, Com Port Redirector software.Meets FCC, C/UL, CSA, VCCI, CE, TUV, Ctick certifications and standards.Weighs 0.4 kg.Comes with 2 years limited warranty.Includes UD1100002-01 device server, device installer software, com port redirector software.Weight: 7.05 oz..Black.Lantronix® 1-Port Device server is a quick, simple & inexpensive way to bring the advantages of remote management to equipment. Delivers increased performance with the best memory.

The SGFEB provides a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment. Deploying fiber into today's networks provides the ability to transmit data over significantly longer distances than is possible on copper. Fiber also protects your data from external sources of noise and interference, improving network performance..Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over optical fiber cable

Convert and extend a Gigabit Ethernet connection up to 10km over single-mode SC fiber - Provides a cost-effective Ethernet copper to fiber or fiber to copper link - LFP mode on fiber/copper sides - Compact design and wall mountable with easy installation - SC connection (fiber) and RJ45 connection (copper) - Fiber to Ethernet Converter / Fiber to Copper Converter / Fiber optic media converter / Fiber to Ethernet Media Converter / Media converter fiber to Ethernet.Converts and extends a Gigabit fiber (1000 Mbps) network over single-mode fiber on 1000BASE-LX networks.Provides a cost-effective Ethernet to fiber/copper to fiber link.Supports a maximum distance of 10 km over single mode duplex fiber optic cable (SC connection).Compact design and wall mountable.Non-blocking full wire-speed forwarding rate.LED Indicators for simple Ethernet/fiber network link monitoring.1310 nm wavelength.Supports IEEE 802.1q Tag VLAN pass through.Convert and extend a Gigabit Ethernet connection up to 10 km over single-mode SC fiber

Convert and extend a Gigabit Ethernet connection up to 550m over multimode SC fiber - Provides a cost-effective Ethernet copper to fiber or fiber to copper link - LFP mode on fiber/copper sides - Compact design and wall mountable with easy installation - SC connection (fiber) and RJ45 connection (copper) - Fiber to Ethernet Converter with - 850 nm wavelength - Fiber to Copper Converter / Fiber optic media converter / Fiber to Ethernet Media Converter / Media converter fiber to Ethernet.Converts and extends a Gigabit Ethernet fiber (1000Mbps) network over multimode fiber on 1000BASE-SX networks.Provides a cost-effective Ethernet to fiber/copper to fiber link.Supports a maximum distance of 550 m over multimode fiber-optic cable (SC connection).Compact design and wall mountable.Non-blocking full wire-speed forwarding rate.LED Indicators for simple Ethernet/fiber network link monitoring.850 nm wavelength.Supports IEEE 802.1q Tag VLAN pass-through.Convert and extend a Gigabit Ethernet connection up to 550 m over multimode SC fiber

Cisco™ Downstream SFP module is a hot-swappable I/O device that plugs into a gigabit Ethernet slot and linking it with the fiber-optic network. Module supports data networking applications and offers data transfer rate of 1 Gb/s..1 x LC 1000Base-BX.0.3"(H) x 0.5"(W) x 2.2"(D).Cisco ME 2400, Catalyst 2960 series, Cisco ME 3400, Catalyst 3560 series, Catalyst 3750 series, Catalyst 4500 series, Catalyst 4900 series, Catalyst 6500 series.Wired.Connectivity media: G.652 microm single-mode optical fiber.Form factor: Hot-swappable.Management: Digital optical monitoring (DOM) functions, Application/usage: Data networking.Data transfer rate: 1 Gbps gigabit ethernet.Operating transmission range: Up to 10 km.Small form-factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet-port or slot, linking the-port with the network.1490-nm TX/1310-nm RX wavelength.Warranty: 90 days limited.Cisco™ Downstream SFP module has the ability to go up to 10 km over G.652 microm single-mode optical fiber and features digital optical monitoring functions.

Transition Networks® Cisco compatible SFP transceiver module features 1000Base-LX interfacing through SFP connector and are designed for bidirectional serial-optical data communication. Module used in gigabit ethernet operate at a speed of 1.25 Gbps..Interfaces/ports: 1 x 1000Base-LX, Interfaces/ports details: 1 x LC 1000Base-LX.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Compatible with: 1000BLX SM LC 10KM 3.3V.Application/usage: data networking.Warranty: lifetime.Transition Networks® Single mode SFP transceiver module are Cisco compatible allowing 1000Base-LX interface to the network and operates at 1310nm wavelength there by finding its application in gigabit ethernet, metro edge switching.

The Omnitron 01-01-7207 SFP optical transceiver enables a single network device to connect to a wide variety of flexible fiber and copper cable through its interchangeable, compact media connectors. It is compatible with iConverter®, FlexPoint™, OmniConverter™ and miConverter™ products to meet specific network protocols and media requirements. This transceiver supports digital diagnostic by providing enhanced diagnostic information. The compact design and the ease of interchangeability of this unit provide a flexible solution for network designs..Optical transceiver module is compatible with iConverter media converter modules, T1/E1 multiplexers and network interface devices.LC duplex 1000Base-LX network.Media type supported: Optical fiber, fiber mode supported: Single-mode, fiber optic cable standard: 9/125 ohm m.Form factor: Hot-pluggable, hot-swappable, data transfer rate: 1.25 Gbps.Compatible with FlexPoint, OmniConverter and miConverter media converter modules that support SFP transceivers.Compliant with IEEE 802.3u fast Ethernet and 802.3z gigabit Ethernet specifications.Supports operational data rates for SONET OC-3/12/48, SDH STM-1/4/16 and fiber channel x1/x2.Supports a wide variety of cable types, supports digital diagnostic capability, low EMI metal enclosure.Temperature: 0 to 50 deg C commercial, -40 to 80 deg C storage.Meets RoHS, Green, WEEE standards.Comes with 1 year warranty.Certifications and standards: Compliant with MSA SFF-8472 standard.OMNITRON SYSTEMS iConverter 1000Base-LX SFP Optical transceiver supports data transfer rate of 1 Gb/s and is suitable to use with networking applications.

The StarTech® SFP10GLRST 10 Gigabit fiber LC SFP+ transceiver module offers reliable 10 Gigabit Ethernet connections for 10GBase-LR compliant networks. This Gigabit SFP+ module ensures maximum performance and easily installs into Cisco® switches. This transceiver module measures 2.2" x 0.5" x 0.5" and is compatible with 10 Gigabit fiber networking equipment as well as media converters. It has aluminum construction with zinc-plated casing enclosure for added protection. It has LC duplex 10GBase-LR network port for connectivity and supports single-mode optical fiber media to transfer data at 10 Gbps up to a distance of 10 km..100% compatibility with Cisco SFP-10G-LR guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.3 W.Hot-swappable with fiber-optic modules

Industry standard Cisco small form factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a gigabit Ethernet port or slot, linking the port with the network..Interfaces/ports: 1 x LC duplex 1000Base-LX/LH.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Cisco IE 3000 series switches, cisco 3200 series rugged routers, cisco MWR 2900 mobile wireless routers.Connectivity technology: Wired.Connectivity media: Single mode fiber 1000Base-LX/LH.Operating temperature: -40 - 185 deg F.Fiber type: SMF/MMF.Cabling type: Ethernet 1000Base-LX.Additional information: Spare product, range: 10 Km, wavelength: 1300 nm.Data transfer rate: 1 Gb/s gigabit Ethernet.Form factor: Hot swappable/plug-in.Application/usage: Data networking.SFP (mini-GBIC) transceiver module 1000 MBPS SFP single mode rugged 1000BASE-LX/LH SFP for MMF and SMF.

Lantronix Single port device server provides a portable, extremely flexible and highly affordable network connectivity solution. Server features serial data rate of up to 921.6 Kbps..Network Certificates and standards: 10Base-T/100Base-Tx.LAN Ports: Ethernet 10Base-T/100Base-Tx.Wired router security: 128-bit AES, 192-bit AES, 256-bit AES encryption.Connectivity technology: Wired.Protocol: Ethernet, fast ethernet, RS-232, RS-422, RS-485 data link, TCP/IP, UDP/IP, ICMP/IP, BOOTP, DHCP network/transport, SNMP, Telnet, HTTP, TFTP remote management.Form factor: External.Status indicators: Power, status, link/activity, serial.Power consumption: 2 W.OS required: Microsoft Windows 2008/2003 server, Windows Vista/7/xP/ (32/64 bits).Data rate: 300 bps - 921.6 kbps, 10 Mbps, 100 Mbps.Features: Flow control, auto-sensing per device, DHCP support, 15 KV electrostatic discharge protection.Operating tempreature: 70 - -40 deg C.Processors: 1 x installed, 256 KB SRAM, 1MB flash memory installed.Certifications and Standards: VCCI, C-Tick, EN 61000-3-2, EN 61000-3-3, EN55024, CISPR 22, EN55022 Class B, FCC Part 15 B, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, IEEE 802.3af.Lantronix Single port device server is a sleek and compact serial-to- Ethernet device server providing quick and easy Ethernet connectivity to virtually any device or machine with a serial interface.