OS2 Single-Mode Fiber

StarTech OS2 LC to SC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 6.6'.LC/SC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 16.4'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 26.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 22.9'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 6.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 6.6'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 32.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 9.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 19.7'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 65.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length: 3.3'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 32.8'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 16.4'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 49.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length: 3.3'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 9.8'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Enhance the performance capabilities of CWDM applications with this OS2 fiber cable.Cable length: 3.3'.SC/SC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in aramid-reinforced yellow jacket for a loaded bend radius of 10mm.Single Mode OS2 fiber cable is immune to EMI and optimized for 10/40/100G networks.Perfect for connecting between servers/switches and data center equipment.Meets or exceeds the ITU-T G652.D/G657.A1 and IEC60703-2-50 Type B1.3/B6.a1 standards.LSZH jacket emits low toxic fumes if combusted; safe for enclosed/poorly ventilated spaces.Attenuation value under 0.35dB/km outperforms industry standards.Backward compatible with OS1.High micro-bend resistance facilitates tight bends in complex installations.Coarse Wavelength Division Multiplexing (CWDM) enables extended 1260-1625nm wavelength support for greater channel isolation over long distances.Number-labeled connectors to indicate polarity.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Enhance the performance capabilities of CWDM applications with this OS2 fiber cable.Cable length: 9.8'.SC/SC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in aramid-reinforced yellow jacket for a loaded bend radius of 10mm.Single Mode OS2 fiber cable is immune to EMI and optimized for 10/40/100G networks.Perfect for connecting between servers/switches and data center equipment.Meets or exceeds the ITU-T G652.D/G657.A1 and IEC60703-2-50 Type B1.3/B6.a1 standards.LSZH jacket emits low toxic fumes if combusted; safe for enclosed/poorly ventilated spaces.Attenuation value under 0.35dB/km outperforms industry standards.Backward compatible with OS1.High micro-bend resistance facilitates tight bends in complex installations.Coarse Wavelength Division Multiplexing (CWDM) enables extended 1260-1625nm wavelength support for greater channel isolation over long distances.Number-labeled connectors to indicate polarity.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

AddOn® 1000BASE-LX 1310nm 10km SMF SFP Module is built to meet or exceed the OEM's specifications and supports optical networking. Module can be deployed with 3rd party transceivers for seamless network performance and features SMF connectivity..Interface/ports: 1 x LC 1000Base-LX/LH network.Compatibility: Catalyst Express 500, Catalyst Express 520, ME 3400, ME 3600X, ME 3800X, ME 4900 Series, Catalyst 2940, 2950, 2960, 2960-S, 2960-C, 2970, 2975, 3560, 3560-E, 3560-X, 3560-C, 3750, 3750-E, 3750-X Series.Connectivity technology: Wired.Form factor: Hot-swappable.Connectivity media: Single-mode optical fiber 1000Base-LX/LH, multi-mode optical fiber 1000Base-LX/LH.Max transfer distance: 10km.Data transfer rate: 1 Gbps gigabit Ethernet.1310 nm wavelength.SFP module is a Cisco compatible SFP transceiver that operates at 1310nm over single-mode fiber, with a maximum reach of 10km connected via a LC connector, built to meet or exceed the OEM's specifications, and comply with MSA.Hot-swappable input/output device that plugs into a gigabit Ethernet slot, linking the port with the fiber-optic network.Warranty: Lifetime limited.AddOn® 1000BASE-LX 1310nm 10km SMF SFP Module is supported with DOM to access real-time operating parameters and is hot swappable.

The Omnitron 01-01-7207 SFP optical transceiver enables a single network device to connect to a wide variety of flexible fiber and copper cable through its interchangeable, compact media connectors. It is compatible with iConverter®, FlexPoint™, OmniConverter™ and miConverter™ products to meet specific network protocols and media requirements. This transceiver supports digital diagnostic by providing enhanced diagnostic information. The compact design and the ease of interchangeability of this unit provide a flexible solution for network designs..Optical transceiver module is compatible with iConverter media converter modules, T1/E1 multiplexers and network interface devices.LC duplex 1000Base-LX network.Media type supported: Optical fiber, fiber mode supported: Single-mode, fiber optic cable standard: 9/125 ohm m.Form factor: Hot-pluggable, hot-swappable, data transfer rate: 1.25 Gbps.Compatible with FlexPoint, OmniConverter and miConverter media converter modules that support SFP transceivers.Compliant with IEEE 802.3u fast Ethernet and 802.3z gigabit Ethernet specifications.Supports operational data rates for SONET OC-3/12/48, SDH STM-1/4/16 and fiber channel x1/x2.Supports a wide variety of cable types, supports digital diagnostic capability, low EMI metal enclosure.Temperature: 0 to 50 deg C commercial, -40 to 80 deg C storage.Meets RoHS, Green, WEEE standards.Comes with 1 year warranty.Certifications and standards: Compliant with MSA SFF-8472 standard.OMNITRON SYSTEMS iConverter 1000Base-LX SFP Optical transceiver supports data transfer rate of 1 Gb/s and is suitable to use with networking applications.

AddOn 6.5' Optic patch cable comes with low smoke zero halogen jacket and supports network devices. Cable with 2 x LC male connectors on both sides provides higher speeds with increased bandwidth and is ideal for LAN or SAN connectivity..2 x LC male/2 x LC male.Molded.Cable Length: 6.5'.Jacket material: Low smoke zero halogen.Cable type: Fiber optic.Yellow.Device supported: Network device.Core/Cladding diameter: 9/125 micrometer.Fiber optic mode: Single-mode.Fiber Qty: 2.Specifically designed for ethernet, multimedia, or communication applications is intended for use with 10Gb applications.Suited for LAN's or SAN's is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Low-smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduit.Injection molding process provides each connection greater durability in resisting pulls, strains, and impacts from cabling installs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.100% optically tested for insertion loss.Warranty: 3 years limited.AddOn 6.5' Optic patch cable in yellow color adds perfect choice for ethernet, multimedia or communication and 10GB applications and offers fire protection.

Tripp Lite Duplex singlemode fiber patch cable has beveled edge on ends of glass that makes insertion of plug a breeze and color coded to identify transmit or receive. Cable has insertion loss testing performed on connector and provided with cable..Fiber optic.Beveled edge on ends of glass makes insertion of plug a breeze.3.28'.Yellow.Material: Polyvinyl chloride PVC jacket.Connections: 2 x LC male to 2 x LC male.Core/cladding diameter: 9/125 microm.Applications: Networking equipment that requires singlemode fiber optic patch cables.System requirements: Any fiber optic hardware or NIC card requiring singlemode duplex cable with LC/LC connectors.Insertion loss testing performed on every connector (0.2db typical) and provided with cable.Fiber made from glass.Color coded shrouds identify transmit and receive.Fiber optic distributed data interface (FDDI) rated.Includes 3' duplex singlemode fiber patch cable, LC/LC.Certifications and standards: FDDI, OFNR.Warranty: Lifetime limited.Tripp Lite Duplex singlemode 8.3/125 fiber patch cable measuring 3' is made of durable glass and provides twice bandwidth throughput of multimode.

StarTech MSA-compliant fiber optic transceiver with 25Gbps connectivity up to 10km over LC-terminated Single Mode Fiber (SMF) cable. The optical module has been programmed and tested for seamless integration with MSA-compatible switches and routers to ensure compatibility and reliability..MSA-compliant fiber optic transceiver with 25Gbps connectivity up to 10km over LC-terminated Single Mode Fiber (SMF) cable.Enhance the networking infrastructure with this optical transceiver, ensuring reliable performance and seamless connectivity.Data transfer rate: 25Gbps.Long-range capability facilitates long-distance connections (up to 10km) across or under large buildings, urban and rural network installations, and strategic single-mode fiber cable runs.Power consumption: 1.2W.MCA-compliant and compatible with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link, and other brands that support uncoded modules.Wavelength: 1310nm.Excels in bandwidth-intensive tasks such as virtualization, efficient data migrations, high-performance storage, high-performance computing (HPC), future-proofing a network, and rapid online content uploads.Meets or exceeds RoHS, WEEE, CE, FCC standards.Lifetime manufacturer limited warranty

This StarTech fiber optic transceiver is the direct equivalent to Cisco SFP-25G-LR-S for 25Gbps connectivity up to 10km over LC-terminated Single Mode Fiber (SMF) cable. The optical module has been programmed and tested for seamless integration with Cisco switches and routers to ensure compatibility and reliability..Fiber optic transceiver is the direct equivalent to Cisco SFP-25G-LR-S for 25Gbps connectivity up to 10km over LC-terminated Single Mode Fiber (SMF) cable.Enhance the networking infrastructure with this Cisco-compatible 25GBASE-LR optical transceiver, ensuring reliable performance and seamless connectivity.Data transfer rate: 25Gbps.Long-range capability facilitates long-distance connections (up to 10km) across or under large buildings, urban and rural network installations, and strategic single-mode fiber cable runs.Power consumption: 1.2W.MCA-compliant and compatible with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link, and other brands that support uncoded modules.Wavelength: 1310nm.Excels in bandwidth-intensive tasks such as virtualization, efficient data migrations, high-performance storage, high-performance computing (HPC), future-proofing a network, and rapid online content uploads.Meets or exceeds RoHS, WEEE, CE, FCC standards.Lifetime manufacturer limited warranty

Dell EMC SFP-10G-LR Compatible SFP+ Module - 10GBASE-LR - 10GbE Single Mode Fiber SMF Optic Transceiver - 10GE Gigabit Ethernet SFP+ - LC 10km - 1310nm - DDM (SFP10GLREMST).100% DELL EMC SFP-10G-LR COMPATIBLE SFP+ TRANSCEIVER: Designed, programmed and tested to work with compatible Dell EMC switches and routers to deliver dependable 10GbE connectivity.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself - not the life of your switch. Our modules won't void your OEM warranty and supported by our Tech Advisors 5/24..TECHNICAL SPECS: 10GBASE-LR | 10Gbps | Single Mode (SMF) | LC Connector | 1310nm | Digital Diagnostic Monitoring (DDM) | Distances up to 10km (6.2mi).TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Dell EMC routers and switches; DDM support reports the transceiver's status to most SNMP network management tools.WORKS WITH MSA COMPLIANT SWITCHES: Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules.10 Gbps | Single Mode Fiber | LC | 10 km (6.2 mi) | Lifetime Warranty

Industry standard Cisco small form factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a gigabit Ethernet port or slot, linking the port with the network..Interfaces/ports: 1 x LC duplex 1000Base-LX/LH.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Cisco IE 3000 series switches, cisco 3200 series rugged routers, cisco MWR 2900 mobile wireless routers.Connectivity technology: Wired.Connectivity media: Single mode fiber 1000Base-LX/LH.Operating temperature: -40 - 185 deg F.Fiber type: SMF/MMF.Cabling type: Ethernet 1000Base-LX.Additional information: Spare product, range: 10 Km, wavelength: 1300 nm.Data transfer rate: 1 Gb/s gigabit Ethernet.Form factor: Hot swappable/plug-in.Application/usage: Data networking.SFP (mini-GBIC) transceiver module 1000 MBPS SFP single mode rugged 1000BASE-LX/LH SFP for MMF and SMF.

The Dell™ SFP+ optical transceiver with 10GBase-LR network technology, offers 10GbE connectivity up to 10 km distance. It works on Gigabit Ethernet technology for data networking applications. This hot-pluggable transceiver featuring SFP footprint, features a unique digital diagnostic monitoring interface for real-time access to device operating parameters. The transceiver with a duplex LC connector, is compatible with select Dell networking N4000 series and N-series systems..Transceiver module for data and optical networking applications.Port: 10GBase-LR: 10 Gb/s, up to 6.2 miles.Connectivity media: Single-mode optical fiber.Plug-in module form factor.Optical wavelength: 1310 nm.Dell Networking transceiver module features 10GBase-LR port, 10 Gbps, upto 6.2 miles.

The Cisco 100GBASE QSFP (Quad Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The QSFP-100G modules are our new generation of 100G transceiver modules solution based on QSFP form factor..With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance.100 Gigabit Ethernet - High bandwidth performance, ease of use and reliable connectivity.With 100GBase-LR4 technology, get up to 100Gbps data transfer rate over optical fiber cable

The Cisco SFP-10G-LR-S= SFP+ module measuring 0.3" x 0.5" x 2.2", supports a link length of 10 km on standard single-mode fiber. It has LC/PC duplex 10GBase-LR network interface for optimal connectivity. This hot-swappable module transmits data over optical fiber media..SFP+ module is suitable for SMF.Dimensions: 0.3"H x 0.5"W x 2.2"D.Has one LC/PC duplex 10GBase-LR network port for connectivity.Supports 10 Gigabit Ethernet technology for high speed connectivity.Supports single-mode fiber.Optical fiber media for quick data transfer.Network technology: 10GBase-LR.Form factor: Hot-swappable.Perfect for both data and optical networking.Weight: 2.65 oz..Comes with 1 year limited warranty

HPE is the global edge-to-cloud company built to transform your business. How? By helping you connect, protect, analyze, and act on all your data and applications wherever they live, from edge to cloud, so you can turn insights into outcomes at the speed required to thrive in today's complex world..This short range, fibre channel, SFP28 transceiver is designed for HPE MSA storage.Supports up to 25 Gbps of data transfer rate.Four transceivers per pack.Dimensions: 8"H x 0.21"W x 3"D

HPE BladeSystem c-Class transceivers are recommended options that have been selected by HPE experts to provide the right technology for a range of workloads and market segments offering the best combination of performance, value and availability..Single-mode fiber optic transceiver.Made in SFP+ form factor that supports the 10G-LR standard.Provides 10G connectivity.Maximum distance of up to 10km on single-mode fiber cable.Typical power consumption: 0.9W; maximum power consumption: 1W.Wavelength: 1310nm.Conditioning patch cord cables are not supported.For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish

10GBASE-SR is a port type for MMF (multimode fiber) and uses 850 nm lasers. For longer reach, another standard defined in IEEE 802.3ae is 10GBASE-LR. 10GBASE-LR is a port type for SMF (single mode fiber) and uses 1310 nm lasers. Traditionally SMF 10GBASE-LR SFP+ modules are way more expensive than MMF 10GBASE-LR SFP+ modules. MMF and SMF historical short range / long range paradigm may change in short term: since 2014, for new installations, especially indoor, SMF wiring is about half of MMF wiring. As a consequence, lots of new buildings and datacenters now standardize on SMF. But 10GBASE-LR SFP+ transceivers are too expensive for short-range connections. A new market for short distances over SMF has been created: the industry is standardizing on a new class of SMF 10G transmitters with typical 10GBASE-LR LITE SFP+ transceivers. While not a standard yet, 10GBASE-LR LITE has a specified reach of 2 km over standard 9µm single mode fiber. 10GBASE-LR LITE isn’t a replacement for 10GBASE-LR optics: it is just relevant alternative for “shorter” reach SMF applications..Utilizes LC duplex connectors with single-mode fiber (SMF) for high-speed data transmission.10GBASE-LR Lite SFP+ transceiver for 10GbE over single-mode fiber.Data transfer rate of 10 Gigabits per second (10Gbps), equivalent to 10,000 Megabits per second (Mbps).Supports maximum transmission distance of up to 2,000 meters over single-mode fiber.10 Gigabit Ethernet connectivity for high-speed network performance.Hot-swappable, allowing installation or removal without powering down the system.MSA compliant, ensuring interoperability with other MSA-compliant networking equipment.Operates at a wavelength of 1310 nanometers (nm)

The Tripp Lite yellow 26.25' patch cable quickly transmits clear data signals through LAN with a higher operating bandwidth. This single-mode fiber optic patch cable has two LC male on first end and two LC male on second end for connectivity. It has core/cladding diameter of 8.3/125 um and features durable PVC jacket for added protection. It supports network device, patch panel and switch. It delivers twice the bandwidth throughput of multimode cable. It has beveled edge on glass ends for easy plug insertion into patch panel or switch..Single-mode fiber optic patch cable transmits fast, clear data signals through LAN with a higher bandwidth.Cable length: 26.25'.Connections: Two LC male on both ends.Connectivity: Wired.PVC jacket for added safety.Meets RoHS, OFNR certifications and standards.Comes in yellow color.Core/cladding diameter: 8.3/125 um.Supports network device, patch panel and switch.Beveled edges on glass ends offer easy insertion into a patch panel or switch.Zip cord for easy plug insertion.Comes with lifetime limited warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single Mode OS2 Fiber Cable is optimized for 100G Networks; Ideal for connecting between servers/switches and data center equipment.131 ft. cable for long distance application.This cable is Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.16.4 ft. cable for longer distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.32.8 ft. cable for longer distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 32.8ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 16.4ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 65.6ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable is for use in 100 Gigabit Ethernet and fiber-channel applications.Cable Length ( ft.): 164 ft..This cable is Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 82ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Flame Retardant, EMI Protection, Bend Insensitive, Bend Resistant, Laser-optimized, Molded, Strain Relief, Passive.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 19.6ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 32.8ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime.Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 Single Mode Duplex Fiber Optic Cable; Duplex fiber optic cable offers simultaneous, bidirectional data transfer.9.84 ft. fiber optic cable for high-speed, low-latency connections.This cable enables safer cable installations in areas with poor ventilation and is safe to use in any application. It features Ultra Physical Contact (UPC), Bend Insensitivity, Flame Retardant, Bend Resistance and EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Cable for use in 40/100 Gigabit Ethernet and fiber-channel applications.98.4 ft. fiber optic cable for longer distance application.This cable is Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single Mode OS2 Fiber Cable supports 40G/100G networks for high-speed, low-latency connections.9.84 ft. for short distance application.This cable is Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 16.4ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 16.4ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime.Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enhance the performance capabilities of CWDM applications over an OS2 fiber network