Poe Adapter

This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity.The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware.Contains PCI Express, SATA power (15 pin), and RJ-45 (PoE+).Supports the IEEE 802.3af and IEEE 802.3at (Type 1 and Type 2) standards for Power Sourcing Equipment (PSE) and can deliver up to 48V DC and 25.5W of power to compliant Powered Devices (PD).Leverages Intel vPro technology for remote management and troubleshooting capabilities. Improve bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and the streaming of online content.Access up to 2.5GBASE-T speeds using Cat5e (or better) cabling, to maximize existing networks and equipment.Connect Power over Ethernet enabled IP cameras, phones, or Wireless Access Points.Provide power to remote powered devices that require a PoE power source.Add multi-gigabit connectivity to a desktop or server.Compatible with Windows 10, 11; Windows Server 2019, 2022; Linux 5.8.x and up.Box contains: network card, low-profile bracket, quick start guide.2-year manufacturer limited warranty.This card supports the following advanced features: PXE Boot, WoL, VLAN tagging, 9 K jumbo frame, full-duplex, and Intel vPro technology..This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.

Extend your network reach with the Veracity Outreach Max GXT, designed for outdoor environments. This robust extender instantly doubles gigabit Ethernet cable range up to 200 meters while maintaining full 10/100/1000 compatibility. Powered by PoE, it eliminates the need for additional power sources, simplifying installation. Secure wall mounting with a detachable bracket ensures stability, and easy-fit cable seals accommodate cables with existing RJ45 plugs for hassle-free setup. Ideal for extending connectivity in demanding outdoor applications..Universal 10/100/1000 compatibility.Easy to fi t cable seals for cables with existing RJ45 plugs.Powered by POE (Power over Ethernet).Instantly doubles gigabit cable range to 200 metres

Cisco™ AIR-PWRINJ6= 100 Mbps Power PoE Injector for Aironet 1810 Series Access Point.PoE injector is ideal to use with access points.Dimensions: 1.28"H x 2.09"W x 5.5"D.Compatible with Cisco Aironet 2800 series and 3800 series access points.Connectors: RJ-45, EIA 568A and 568B.Data transfer rate: 10/100/100 Mbps.Power: 30 W (user port), 100 - 240 VAC, 0.67 A, 50 - 60 Hz (input), 55 VDC (output).Reliability: MTBF 100000 hrs at 25 deg C.Thermal rating: 20 BTU/Hr at 240 VAC.Temperature: -4 to 104 deg F (operating), 4 to 158 deg F (storage), 90 % relative humidity.Meets China RoHS, IEEE 802.3, WEEE, CE, FCC, VCCI, UL, IEC/EN certifications and standards.Weight: 0.44 lbs..100 Mbps PoE injector provides up to 30 W and is compliant with IEEE 802.3af systems, for use with the Cisco Aironet 2800 series and 3800 series access points.

The Trendnet 48VDC3000 160 W power adapter provides an output voltage of 48 V and output current of 3.34 A for reliable performance. The AC adapter is compatible with TI-PG541 web smart PoE+ switch..Power adapter.Compatible with TI-PG541.Input: 100 - 240 VAC, 50/60 Hz, 2.0 A.Output: 48 V, 3.34 A, 160 W maximum.AC-DC adapter.Reliable performance.Comes with 1 year warranty.Trendnet power adapter compatible with TI-PG541 having 100 - 240 VAC, 50/60 Hz, 2 A input, 48 V, 3.34 A, 160 W maximum output.

Supply power to PoE devices on demand. The SRPM24 Power over Ethernet (PoE) midspan is ideal for adding PoE functionality to an existing network. Many network devices such as wireless access points and IP telephones support PoE to power the device instead of connecting to a power outlet. The benefits of using PoE include cost savings from not requiring new power outlets to be installed in remote locations, easier portability of devices, more freedom of where to place devices, and providing a central source for supplying power backup. The SRPM24 is designed to be scalable, so only PoE powered devices need to be connected to the unit and non-PoE devices can connect directly to a switch. For ease of management, the SRPM24 supports both SNMP, CLI command line, and a web-based interface to monitor and manage the device..Input Ports: 24 10/100Base-TX.Output Ports: 24 10/100Base-TX.Input Voltage: 240 V AC

The CyberData 10/100 Mbps SIP paging adapter in gray, works with two separate SIP extensions. It features 10 channel prioritized multicast ports for reliable connectivity. This adapter supports up to nine user-loadable page messages that allows you to play with the help of DTMF command. It requires 10 kilo-Ohms input for background music and 600 Ohms balanced audio out. The adapter with built-in diagnostics, has remote amp fault sensor..SIP paging adapter is a VoIP endpoint that connects analog paging systems with SIP and multicast-based audio sources.No. of SIP extensions: Two.Control: Voice prompt pass code and page.Dimensions: 6.11"L x 4.05" x 1.15"H.Ethernet I/F: 10/100 Mbps.Power input: PoE 802.3af or 48 VDC, RCA input signal amplitude: 2 VPP maximum.Page port output balanced: 600 Ohm 5 VPP, Payload types: G711.RCA output impedance: 10k Ohms.Protocol: SIP RFC 3261 compatible.User-uploadable page messages: Up to 9 messages.Features: 10 channel prioritized multicast ports, DTMF and programmatic controlled relay, DTMF pass-through.Features: HTTP web interface and setup, built-in diagnostics, remote amp fault sensor.Also features 10 channel prioritized multicast ports, DTMF pass through.SIP Paging Adapter is a VoIP endpoint that interfaces analog paging systems with SIP and Multicast-based audio sources.When called, SIP extension two plays a bell audio that can be used as a night ringer when configured in a night ring group.Regulatory compliance: FCC Class A, UL 60950.Warranty: 2 years limited.CyberData SIP paging adapter has 10 channel prioritized multicast ports and offers voice prompt that is used to pass code or page control.

The USW Flex Utility is an outdoor weatherproof enclosure designed for use with the UniFi Switch Flex, USW-Flex. It includes an Ethernet patch cable and a 60W PoE adapter, which provides a maximum PoE budget of 46W. The USW Flex Utility can be easily mounted on a pole, provides clean cable management and screw lock for security..Flex switch adapter kit for streetlight pole applications.Dimensions: 9.8"H x 8.58"W x 2.36"D.Designed for use with the UniFi Switch Flex, USW-Flex (sold separately).Comes in white.Package contains: outdoor weatherproof case, pole holder, and Gigabit PoE power adapter (60W).Easily mounted on a pole, the USW Flex Utility provides clean cable management and a screw lock for security

With a Power-Over-Ethernet (PoE) enabled network switch/router, this Logitech Mevo dongle provides power and wired network connection to your Mevo Start. The Ethernet power adapter also has a USB-C input to power your camera when used with a non-PoE network switch/router..This Ethernet power adapter provides power and wired network connection to your Mevo Start camera.Dimensions: 1.06"H x 1.06"W x 3.13"D.Compatible with Logitech Mevo Start livestreaming camera.Comes in black.Connectivity: USB 2.0 480Mbps; Ethernet 10/100Mbps.Power over Ethernet capabilities: IEEE 802.3-2012 compliant, PD Class 0; Type 1 PD: 37V to 57V operating voltage; maximum input power: 13W.Features a 5V/2A USB Type-C charge port.Power: input (Mevo Start to PoE adapter): 5V/0.5A; output (PoE adapter to Mevo Start): 5V/1.5A.Package contents: Ethernet power adapter and 6.56' angled USB Type-C extension cable

a8ef9a8f5b19bd306bf99b9e17f1114a.BS EN 50121-4 compliant (rail and metro).Fully automatic, simple to install and maintenance-free.Ruggedized for high-performance over extreme temperature range.Unrestricted 100Base-T and POE over 1400m (4,600ft) on RG11

TRENDnet's Industrial Gigabit UPoE Splitter, model TI-SG104, networks a non-PoE device by using a Gigabit Ultra PoE connection and splitting it into separate power and gigabit data sources. The industrial gigabit UPoE splitter can power to up to two devices from a single UPoE source. A convenient DIP switch adjusts output power to 12V, 16V, 24V, or 48V in order to match power requirements for non-PoE devices. The UPoE splitter's dual DC power output provides greater device compatibility. UPoE Powered No power adapter necessary; the UPoE splitter takes a UPoE network connection, and splits power and data into separate connections to network a non-PoE device with power up to 100m (328ft.). GIGABIT ETHERNET : 1 x Gigabit UPoE input port, 1 x Gigabit output port NDAA + TAA COMPLIANT: With our NDAA and TAA compliant Industrial Gigabit UPoE Splitter, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only) MANUFACTURER PROTECTION: We stand by the quality of our products.The TI-SG104, Industrial Gigabit UPoE Splitter is backed and supported with 3 years of TRENDnet Manufacturer Protection. UPoE POWERED: No power adapter necessary; the UPoE splitter takes a UPoE network connection, and splits power and data into separate connections to network a non-PoE device with power up to 100m (328ft.). ADJUSTABLE VOLTAGE OUTPUT: Convenient DIP switch adjusts voltage output to 12V (2.3A), 16V (2.3A), 24V (2.3A) or 48V (1.25A) to match non-PoE device power requirements. WALL MOUNTABLE: The UPoE splitter's wall mountable design accommodates most installation scenarios. DUAL DC POWER OUTPUT TERMINAL BLOCK: The UPoE splitter includes a dual DC power output terminal block, powering for up to two devices For best performance pair with UPoE switches or injectors; Save on installation and equipment cost Full Duplex Gigabit speeds: IEEE 802.3bt compatible More from the Manufacturer.Full Duplex Gigabit speeds.IEEE 802.3bt compatible.For best performance pair with UPoE switches or injectors.Save on installation and equipment cost

AXIS T8144 60 W Industrial Midspan is an industrial grade 1-port midspan offering an easy, fast and cost-effective solution for powering network products. With a wide operating temperature, from -40 °C to 75 °C (-40 °F to 167 °F), AXIS T8144 is robust in harsh environments. A typical configuration would be to enable PoE to a non-PoE based system (switch, 3G/4G router, or wi-fi access point) creating a compact and effective solution. AXIS T8144 is ideal for mounting in cabinets or on DIN rail, has dual DC inputs for power redundancy and supports all PoE devices..Input Ports: 1 10/100/1000Base-T.Output Ports: 1 10/100/1000Base-T.Maximum Output Voltage: 55 V DC