Poe Adapter

The Ubiquiti® POE-24-12W-G 24V PoE injector with Gigabit LAN port, powers a variety of PoE devices belonging to the airFiber, airMAX, EdgeMAX, airVision, UniFi and mFi series. This 24 VDC injector provides protection against surge, clamping, peak pulse current, maximum surge discharge and ESD attacks..Power over Ethernet injector provides protection against surge, clamping, peak pulse current.Compatible with Ubiquiti products - airFiber, airMAX, airVision, UniFi, mFi.Interface/ports: Gigabit LAN port.Dimensions: 1.14"H x 3.43"W x 1.73"D.Form factor: Wall mountable.Power supply: Input: 90 - 260 VAC at 47 - 63 Hz, 0.3 A at 120 VAC, 0.2 A at 240 VAC, output: 24 VDC at 0.5 A.Temperature: 0 - 40 deg C operating, -30 - 70 deg C storage, humidity: 35 - 95% non-condensing operating.Meets IEC 60950-1:2005+A1, UL60950-1, EN55022:2010, EN55024:2010, FCC Class B, USA, EU, AR, BR, UL, CCC, Mexico standards.Weight: 3.51 oz.

Power your video bar and send data with a single cable using this PoE++ 65W 2.5G Adapter with Cat 6a Cable and Power Cable for Video Bar from Poly. The adapter supports PoE++ to inject power into your Ethernet signal connecting a Poly Video Bar, such as an X32 or V12 that do not have built-in PoE functionality, to your PoE++ enabled network. It supports 2.5 Gb/s Ethernet speeds and includes a 12' long Cat 6a Ethernet cable and a mains power cable..Power over Ethernet (PoE++) injector adapter designed to supply both power and network connectivity to compatible Poly devices over a single Ethernet cable.Includes PoE++ injector unit, 12ft Cat 6a Ethernet Cable and AC power cord.1x Ethernet input port, 1x PoE++ Ethernet output port, and AC power input

Ubiquiti™ Networks™ 48 VDC 24 W Power over Ethernet injector with gigabit LAN port features RJ-45 input/output port to deliver high-speed internet. Injector comes with USA power cord and features an LED display to indicate status of power..Frequency: 47 - 63 Hz, 65 kHz switching.Dimensions: 1.3"(H) x 3.61"(W) x 2.36"(D).Interfaces/ports: Input ports: 1 x RJ-45 ethernet, output ports: 1 x RJ-45 ethernet.Power: Output power: 24 W, input voltage: 110 - 220 VAC, 48 VDC output, input current: 600 mA at 110 VAC, 400 mA at 220 VAC, 500 mA output.Efficiency: 80+%, output ripple: 1%, regulation: + or - 1% line, + or - 3% load, peak pulse current: 36A (10/1000microsecond) data.Operating temperature: -10 - +60 deg C, Operating humidity: 5 - 90% non condensing.Surge protection: Difference and common mode, clamping protection: 11 V data, 60 V power.Shunt capacitance: <5 pf data, response time: <1 nS, 2-pair powering: Pins 4, 5 (+) and pins 7, 8 (-).Compatibility: Rocket-Ti, UAP-Pro.Certifications and standards: IEC 60950-1:2005+A1, UL60950-1, EN55022:2010, EN55024:2010, FCC Class B.Weight: 5.59 oz..Ubiquiti™ Networks™ 48 VDC 24 W Power over Ethernet injector with gigabit LAN port provides earth grounding/surge protection and also helps to protect against ESD attacks.

The Ubiquiti Networks POE-50-60W PoE Adapter is a high-performance power solution designed to deliver reliable 50V, 60W output to a wide range of Ubiquiti PoE-enabled devices, including airFiber, airMAX, airVision, UniFi, and mFi series. Engineered for seamless integration into professional network environments, this adapter features a built-in Gigabit LAN port for high-speed data transmission and supports a wide input voltage range of 90–260V AC at 50/60 Hz, making it ideal for global deployments. Advanced surge protection, clamping, peak pulse current handling, and ESD shielding ensure your network stays protected against electrical threats. The compact and lightweight design (4.0 x 2.4 x 1.3 inches, 6.8 oz) allows for easy installation in tight spaces, while earth grounding support adds an extra layer of operational safety. With an operating temperature range of 32°F to 104°F (0°C to 40°C) and 35–95% humidity tolerance, the POE-50-60W is built to perform in demanding conditions. Backed by a 1-year limited warranty, this PoE adapter is the perfect choice for powering Ubiquiti devices with efficiency, safety, and speed..Powerful 50V, 60W Output: Delivers reliable Power over Ethernet (PoE) for a wide range of Ubiquiti devices including airFiber, airMAX, airVision, UniFi, and mFi series.Integrated Gigabit LAN Port: Ensures high-speed data transmission with full Gigabit Ethernet support.Advanced Surge & ESD Protection: Built-in safeguards against surge, clamping, peak pulse current, and electrostatic discharge for enhanced device safety.Wide Input Voltage Range: Operates on 90–260V AC, 50/60 Hz, making it suitable for global deployments.Earth Grounding Support: Provides additional protection and stability in professional network environments.Compact & Lightweight Design: Measures just 4.0 x 2.4 x 1.3 inches and weighs 6.8 oz for easy integration into any setup.Reliable Operating Conditions: Functions in temperatures from 32°F to 104°F (0°C to 40°C) and 35–95% humidity.IEEE 802.3af Backward Compatibility: Supports legacy PoE devices while delivering robust performance.Ideal for Ubiquiti Ecosystems: Optimized for seamless use with Ubiquiti’s networking hardware—ensuring compatibility and performance.1-Year Limited Warranty: Backed by Ubiquiti’s manufacturer warranty for peace of mind.Ubiquiti™ Networks™ 50 VDC 60 W Power over Ethernet injector provides earth grounding/surge protection and also helps to protect against ESD attacks.

Axis Communications® 5026-401 T8640 POE+ Ethernet over coax adapter enables IP communication over existing Coax video cabling. Converts an analog system to digital and offers standard PoE and centrally sourced power without any new cables. Comes with diagnostics LEDs for power and link status in both base and device unit..Suitable for installation of network cameras.Measures 4.1" x 2.2" x 0.9".Provides BNC 75 ohm coaxial connection and has shielded ethernet RJ-45, EIA 568A or 568B for convenience.Has 100Base-TX full duplex Ethernet cable and offers 100 + 100 Mbps symmetrical to full range coaxial cable data rate.100Base-TX Full duplex coaxial type Ethernet cable delivers 100+100Mbps symmetrical to full range data rate.PoE AXIS T8642 enabled to detect devices up to 25.5 W power.Has network indicators, power indicators, plug-and-play installation, wall/rack/din rail mounting and detects PoE automatically.Operates at 14 - 122 deg F temperature and has storage temperature of -40 to 165 deg F.Meets IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE, FCC part 15 and Class B with FTP cabling standards.Certifications and standards: IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE, FCC part 15, Class B with FTP cabling, EN 55022 Class B, (Emissions, PoE powered), EN 55022 Class A (Emissions, DC powered), EN 55024 (Immunity).Weight: 0.3 lbs..Axis Communications® T8640 POE+ Ethernet over coax adapter is perfect for installation of network cameras. Full network connection is delivered and features durable construction.

Ubiquiti 30W PoE+ adapter can power UniFi PoE+ devices with wireless mesh applications, or offload PoE switch power dependencies. Comes in white..30W PoE+ adapter can power UniFi PoE+ devices with wireless mesh applications, or offload PoE switch power dependencies.Compatible with U7-Pro, U7-Pro-Wall, U7-Outdoor, U6-Enterprise, U6-LR, U6-Enterprise-IW, U6-IW, UTP-TouchMax, UVC-AI-DSLR, and UVC-AI-Pro devices.Dimensions: 3.66"H x 2.44"W x 1.38"D.Comes in white.Surge, peak pulse, and overcurrent protection.Contains RJ45 data input, AC cable with earth ground, and PoE+ output.LED indicator for status monitoring.Rated voltage: 100-240VAC at 50/60Hz.Output voltage: 48VDC at 0.65A.Meets or exceeds the CE, FCC, IC, and UL standards

Adds PoE Devices to Your LAN Without a PoE Switch: Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling. Saves You Time and Money on Unnecessary Equipment Updates: This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. Expand Your Wireless Network Up to 328 ft.: The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, overloads and power surges. Simple Plug-and-Play Installation Has Your Device Connected in Minutes: No configuration or software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to the shielded RJ45 Data port and your PoE device to the shielded RJ45 Power + Data port using existing Cat5e/6/6a cable. Connect the unit's C14 inlet to a NEMA 5-15R outlet using the included power cord. LEDs indicate the unit is receiving power and is ready to transmit data. Designed for Installation Almost Anywhere: Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation. 3-Year Warranty and Environmentally Responsible Design: The NPOE-30W-1G comes with a 3-year warranty. It's manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite's commitment to environmental responsibility..PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch..Saves money by delivering 30W of power + data up to 328 ft. through existing cabling.Extends power + data to any PoE or PoE+ device installed where no AC outlet is available.Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps.Quick and easy plug-and-play installation with no configuration necessary.Compact, hand-sized plastic housing ready for mounting on any smooth surface

The EnGenius EPA2406GR Gigabit Proprietary Power-over-Ethernet adapter supports high-speed data and up to 14.4 watts of power. Compact port design provides easy installation, and built-in power surge protection preserves valuable equipment. A PoE injector, placed closer to ground level, has a reset button that allows administrators to reset devices conveniently without having to take them down. Gigabit Ethernet in & out ports allow connection of high-speed devices Delivers both data and power to EnGenius outdoor access point PoE injector reset button positioned conveniently near ground level Optimal port design for easy mounting/positioning Compact design Extends power to unwired areas up to 328-ft./100m Disconnect, short-circuit & surge protection assures secure, reliable connections Mounts to walls or ceilings with included hardware.Convenient reset button for easy device management.Compact design for flexible installation.Supports high-speed Gigabit data transfer

Certifications & Standards: IEEE 802.3at.PoE Injector.Part Number: WG8599

Maximum Output Power: 30 W.Form Factor: Desktop.Input Voltage: 24 V DC

EnGenius PoE Adapter is easily to power and to network over Ethernet for increasing scalability and reducing installation time and cost. EPA series is a single-port Power over Ethernet (PoE) adapter for use with gigabit system. The ideal solution could assist installers to solve the limitation in designing networks is the availability of power source. The EnGenius PoE adapter allows delivery of both data and power to an Passive 54V- compatible Access Point or device over a single Ethernet cable, allowing deployment of them exactly when users needed to provide the best wireless coverage and at much lower installation cost. Outdoor Networking Facility and Low Port Density Installations The EPA5006GP PoE adapter is Passive 54V, with disconnect, short -circuit and overload protection to assure the securable and reliable connection for Access Points or other PoE devices. By sending maximum 54V/0.6A output, Ethernet terminals which need more power such as wireless LAN high power device, IP media center, and web camera are powered remotely..Provides 54V passive PoE for high-power access points and IP cameras.Includes short-circuit and overload protection for secure connections.Enables flexible deployment in outdoor and low-port-density environments

The Transition Networks® N-GXE-POE-EPS-KIT PoE NIC external power supply kit includes one 40 W power adapter, one low-profile NIC mounting bracket for power cable connector access, one cable assembly and one power cord. This power supply kit offers custom power solution for powering the PoE NIC externally in situations where an HP™ t730 ThinClient cannot supply adequate PoE or PoE+ power..PoE NIC external power supply kit.Dimensions: 125 mmL x 50 mmW x 31.5 mmH.Input frequency range: 47 - 63 Hz.Meets UL60950-1, TUV EN60950-1, BSMI CNS14336, CCC GB4943, J60950-1 standards.Number of outputs: 1, output power: 40 W.DC output connector: 2.1 mm barrel plug, DC output cord length: 1m.Efficiency: Level VI, load regulation: Regulated, input efficiency (typ.): 89.5%.Output DC voltage: 12 V, output rated current: 3.34 A, output current range: 0 - 3.34 A, output rated power (max.): 40 W.Output hold up time (typ.): 50 ms/230 VAC, 15 ms/115 VAC at full load, input voltage range: 90 - 264 VAC, 127 - 370 VDC.Compatible with Thin Client PC.Input AC current (typ.): 1 A/115 VAC, 0.5 A/230 VAC, input inrush current: 65 A/230 VAC, input leakage current: 0.75 mA/240 VAC.Storage temperature: -40 - 85 deg C, working temperature: -30 - 70 deg C with derating.Includes power adapter, 1 x low-profile NIC mounting bracket for power cable connector access, 1 x cable assembly, 1 x power cord.Weight: 9.87 oz.

The Cisco 8832 IP conference phone enhances people-centric collaboration by delivering easy-to-use audio conferencing with astounding voice quality and clarity. This Cisco PoE adapter spare is designed for Cisco 8832 IP conference phone..Power over Ethernet adapter spare for IP conference phone.Provides Ethernet data connection to your IP conference phone.Comes in gray.Includes USB Type-C cable

The TP-LINK PoE+ Injector TL-POE160S fully complies with IEEE 802.3af/at standards and can work with all IEEE 802.3af/at PoE compliant PDs (Powered Devices) and PoE receiver adapters (such as TP-LINK's TL-POE10R or other equivalent product) to expand your network to where there are no power line or outlet, where you wish to fix a device such as AP, IP Camera or IP Phone, and more..PoE+ injector reduces infrastructure costs by transmitting data and power simultaneously via Ethernet cable.Works with all IEEE 802.3af/at PoE compliant powered devices and PoE receiver adapters.Comes in black.Two Gigabit ports ensure faster transmission.Complies with IEEE802.3af/at standards, supplies up to 30W.Automatically determines and supplies the exact power to meet the device's needs.Can be mounted on a wall or positioned on a desktop, accommodating most installation scenarios.Plug-and-play design requires no installation or configuration.Features an integrated power supply

Tenda PoE Injector 48V, IEEE802.3at Gigabit PoE Injector up to 30W, Compatible with IEEE 802.3af, RJ45 Port, Passive PoE 10 / 100Mbps, Distance Up to 100 Meters.High Speed Gigabit Ports Experience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port plus 1× Gigabit Ethernet Output port..802.3at/af PoE Compliant PoE30G-AT supplies power and data with one single ethernet cable to 802.3at/af PoE devices and expands network to areas with no power lines or outlets..Auto Detect Power With Auto Detect technology, PoE30G-AT determines and delivers the exact power supply to your devices with up to 30W power output..Long Range Transmission Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large area..Convert Non-PoE to PoE With no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of PoE30G-AT..Plug and Play Installation no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios..Tenda's product comes with an industry-leading 5-year warranty, accompanied by complimentary lifetime dedicated technical support. Please feel free to contact us via phone or email.

Ubiquiti PoE Injector.Input Voltage: 24 V DC.Form Factor: Desktop.Maximum Output Power: 24 W

The StarTech POEINJ4G black PoE+ injector helps to deliver power and data to four power over Ethernet devices using this wall-mountable PoE+ midspan hub. It supports 10/100/1000 Mbps networks/devices as well as auto-negotiation and auto-MDIX. Features flexible setup and comes with a desktop-sized or wall-mountable metal housing for durability. PoE+ injector automatically detects the powered device to offer the appropriate level of power output..PoE injector is perfect for powering a Wireless Access Point (WAP) in a business environment.Dimensions: 3.7"H x 2.8" W x 1"D.Compatible with IP cameras, IP phones and wireless access points.Comes in black color.Easily connect, power, and operate up to four gigabit PoE-powered devices (PD).Delivers full power to each port - up to 30.8 W (802.3at) or 15.4 W (802.3af) to each connected device.Flexible setup, with a desktop-sized, or wall mountable metal housing for user convenience.Plug and-play setup for reliable operation.Automatically detects the powered device to provide the appropriate level of power output.Circuit protection prevents power interference between each port.Support for 10/100/1000 Mbps networks and devices, as well as Auto-Negotiation and auto MDIX.Enable remote installation of touchscreens, information kiosks, and phones in locations where a power connection is not available.Has 8 - RJ-45 female connectors, 4 ports and 1 power/4 PoE in-use LED indicators.Power supply: 100 -240VAC (input), 52VDC (output ), Current: 2-1A (input), 2.31A (output), Power consumption: 120W max, Power output: 52VDC at 30.8W.Temperature: -10 - 70 deg C (storage), 0 - 50 deg C (operating), Humidity: 5 - 95% RH (non-condensing).Includes 1 x 4-port gigabit PoE+ Injector, 1 x universal power adapter, 3 x power cords (NA/UK/EU), instruction manual.Meets RoHS compliant, FC, CE certification and standards.Weight: 7.2 oz.Comes with 2 years warranty.The StarTech black PoE+ injector is suitable for almost all PoE device classes, including wireless access points, as well as IP phones and cameras.

The EnGenius power-over-Ethernet adapter is suitable for connecting APs, IP cameras, VoIP phones and more. This adapter has an optimal port design that ensures easy, precise mounting or positioning. It has 2 Gigabit Ethernet ports that help in connecting to a switch and PoE-enabled device. The built-in surge protection assures maximum security to your valuable network equipment from electrostatic discharge and lightning strikes. The included hardware provides easy placement of your adapter on walls, structured wiring enclosures and ceilings. It extends the power to the unwired areas up to 328'..Meets IEC 60950-1:2005+A1, UL60950-1, ENS55022:2010, EN55024:2010, FCC part 15 class B, FCC and CE standards and certifications.Physical interface: (1) Gigabit data port, (1) Gigabit data & power output port, (1) IEC-320 C6 AC connector.Power on green LED.Wall mounting and includes anchors and screws.Electrical rating: 100 to 240 VAC input voltage, 0.8 A Max for 100 VAC Input Current, 47-63 Hz AC input frequency, 32.8 W maximum output power.Power lines: Pin4, 5: 54 V, Pin7, 8: Return.Includes EPA5006GP and power cord.Comes with 1 year warranty.Single port gigabit power-over-ethernet adapter will disconnect, short-circuit and surge protection ensures reliable, secure connections.

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance, a switch is normally used as a repeater, or optical fiber may be used. To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable, and forward the rest to the camera. Dependent on midspan and camera type, the connection in total can be between 200-400 meters (656-1312 ft.)..Input Ports: 1 10/100Base-T.Output Ports: 1 10/100Base-T.Weight (Approximate): 1.59 oz

TRENDnet's 10G PoE++ Injector, model TPE-319GI, combines electrical power with a 10GBASE-T network connection to produce a 10G PoE++ network signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE, PoE+ and PoE++ devices. Connect the 10G PoE++ injector to a non-PoE switch, and then run an Ethernet cable with data + power to network a PoE, PoE+ or PoE++ device up to 100 meters (328 ft.) over cat6a or better cabling. Network PoE devices such as wireless access points, IP cameras, VoIP phone systems, IPTV decoders, access controls, and more. DEVICE INTERFACE: 1 x 10GBASE-T port (data); 1 x 10GBASE-T PoE+ port (data + power); Integrated Power Supply POE++: The 10G PoE++ injector supplies a PoE device with PoE (15.4W), PoE+ (30W), or PoE++ (90W) power EXPERIENCE 10G SPEEEDS: The PoE++ Injector converts a non-PoE port to a PoE++ 10G port over existing Cat6a or better cabling. EASY INSTALLATION: Simply connect the 10G PoE++ injector to your network switch and PoE device - no configuration needed. INSTALLATION FLEXIBILITY: The wall-mount design and a sturdy metal enclosure accommodates most installations scenarios. POE DISTANCE: Network a PoE, PoE+ or PoE++ device up to 100 meters (328 ft.) with this injector over cat6a or better cabling 10GBASE-T: The 10G injector is 10GBASE-T compliant and equipped with a 10GBASE-T RJ-45 Port IEEE 802.3af and 802.3at compliant More from the Manufacturer.Supplies PoE (15.4W), PoE+ (30W), or PoE++ (90W).10GBASE-T complian.tIntegrated power supply.Network a PoE device up to 100m (328 ft.) over cat6a or better cabling

The Logitech PoE Injector with Plug Set (952-000074) is a high-performance Power over Ethernet solution tailored specifically for powering Logitech Tap meeting room touch controllers. By delivering both data and power over a single Ethernet cable, it allows for cleaner installations, eliminating the need for separate power adapters and reducing cable clutter. The injector complies with IEEE 802.3af/at standards, providing up to 30W of reliable power, and includes an international plug set for global deployment. Whether used in corporate boardrooms or collaborative spaces, this PoE injector ensures seamless and professional AV integration. It's also compliant with energy and environmental standards like RoHS and WEEE, making it a dependable and eco-conscious choice for modern workplaces..Simplified Cabling for Logitech Tap: Delivers both power and data over a single Cat5e cable, eliminating the need for a separate power outlet at the table.Extended Reach: Supports cable runs up to 131.23 ft (40 meters), allowing flexible placement of Logitech Tap in larger or uniquely configured meeting rooms.Clean and Professional Installations: Reduces cable clutter with precise cable lengths and compatibility with all Logitech Tap mounts, including Table, Riser, and Wall Mounts.Plug-and-Play Integration: Designed specifically for Logitech Tap, ensuring seamless connectivity and reliable performance in any meeting room setup.Included 10m Cable: Comes with a 32.81 ft (10 meters) Cat5e cable, or use your own for custom-length installations.Universal Power Supply: Includes a 100–240V auto-switching power supply with international adapters for global deployment.Ideal for Modern Conference Rooms: Perfect for Microsoft Teams Rooms, Zoom Rooms, and Google Meet setups requiring clean, efficient cable management

Sends data and power over a single Ethernet cable Use to power IP phones, security cameras, wireless access points, IP print servers, and other 802.3af-compatible equipment Avoid the cost and hassle of installing AC power at a remote camera or door scanner Supports 10/100/1000-Mbps midspan data connections on RJ-45 input/output Protection includes overvoltage/current overload and short circuit protection on the power output (per 802.3af specifications) Diagnostic LED indicates adverse power conditions Detects unstable current measurements, low voltage, incorrect resistive signature, and more Simple plug-and-play installation Compact, weighs less than half a pound and can be easily wall-mounted RoHS compliant The device has Data In RJ-45 (10/100/1000) and Data/PoE Out RJ-45 (10/100/1000). PoE midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE injectors add power to the Ethernet link and avoid upgrading switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device. This device is designed for desktop or panel mounting and includes a 100-240VAC internal power supply delivering 15W per port..Provides 15 W of safe Power over Ethernet (PoE) Plus power to each device.Supports Gigabit Ethernet data connections for high-speed equipment.Provides overvoltage and overcurrent overload protection as well as short circuit protection on the power output (per 802.3af specifications).Over temperature protection. Shuts down automatically without being damaged

The Ubiquiti® POE-24-24W-G 24 V gigabit PoE injector offers surge protection, clamping protection, maximum surge discharge and peak pulse current for PoE devices protection. It supports Gigabit LAN PoE interface..Gigabit PoE injector offers earth grounding and surge protection to help protect against electrostatic discharge events.Dimensions: 2.24"H x 3.47"W x 1.3"D.Power: 24 VDC/1 A, 90 - 260 VAC at 47 - 63 Hz (input), Current: 0.6 A at 120 VAC, 0.4 A at 240 VAC (input).Frequency: 65 kHz (switching).Interface/ports: Gigabit LAN PoE.Efficiency: 80+ percent, Output ripple: 1 percent, Line regulation: + 1 percent, Load regulation: + 3 percent.4-Pair powering: Pins 1, 2, 4, 5 (+) and pins 7, 8, 3, 6 (-), AC connector: IEC-320 C6, Data In/PoE: RJ-45 shielded socket.Surge discharge: 1500 A power, Shunt capacitance: <5 pf data, Response time: <1 nS.Meets IEC 60950-1:2005+A1, UL60950-1, EN55022:2010, EN55024:2010, FCC Class B certifications and standards

TRENDnet's Gigabit PoE++ Injector, model TPE-119GI, is an 802.3bt PoE injector that combines electrical power with a gigabit network connection to produce a high-powered 95W PoE++ network signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE, PoE+, and PoE++ devices. Connect the Gigabit PoE++ injector to a non-PoE switch, and then run an Ethernet cable with data + power to network a PoE device up to 100 meters (328 ft.) away. Network PoE devices such as wireless access points, IP cameras, VoIP phone systems, IPTV decoders, access controls, and more with this 802.3btbt PoE injector. DEVICE INTERFACE: 1 x Gigabit Data in port; 1 x Gigabit PoE++ out port POE++: The Gigabit PoE++ Injector converts a non-PoE gigabit port to a PoE++ Gigabit port and supplies PoE (up to 15.4W), PoE+ (up to 30W), or PoE++ (up to 95W) to a device. INSTALLATION FLEXIBILITY: Wall-mount design of the PoE++ injector and a sturdy metal enclosure accommodates most installations scenarios POE TECHNOLOGY: With PoE technology, users only need one set of cables to deliver both data and power simultaneously which reduces equipment cost by delivering data and power over existing network cables. POE DISTANCE: The injector provides a PoE++ network connection up to 100m (328 ft.) AUTO SENSING TECHNOLOGY: Auto-sensing technology on the 802.3bt PoE injector conveniently delivers the correct wattage needed to power your PoE, PoE+, and PoE++ devices. EASY INSTALLATION: No configuration needed, simply connect a PoE network device to the Power over Ethernet injector TRENDnet 3 YEAR PROTECTION: This Gigabit PoE++ Injector comes with 3 Year TRENDnet manufacturer protection NDAA / TAA compliant (U.S. and Canada only). More from the Manufacturer.Supplies PoE (15.4W), PoE+ (30W), or PoE++ (95W.Integrated power supply.Network a PoE device up to 100m (328 ft.) away.Save on installation and equipment costs

The Ubiquiti EdgePoint PoE injector provides a variety of features to help protect your PoE devices: surge protection, clamping protection, maximum surge discharge, peak pulse current, AC cable with earth ground..PoE injector with a variety of features to help protect your PoE devices.Compatible with airFiber, airMAX, EdgeMAX, mFi, UniFi AP, UniFi Protect, airVision, UniFi LED, UFiber.Dimensions: 1.34"H x 4.84"W x 2.56"D.Comes in white.Offers 80W of power to an Ethernet cable for PoE devices.Contains 1 x Gigabit Ethernet RJ45 LAN and 1 x PoE ports.Output voltage: 54VDC/1.5A.Rated voltage: 100-240VAC, 50/60Hz.Surge protection: difference and common Mode.Meets or exceeds the CE, FCC, IC and UL standards

The Ubiquiti Networks PoE Injector is designed for the company's airFiber, airMAX, EdgeMAX, mFi, UniFi AP, and UniFi Protect / airVision products. This 24 VDC, 7.2W, 0.3A adapter provides protection against surge, clamping, maximum surge discharge, and peak pulse current..Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including: airFiber®, airMAX®, EdgeMAX®, mFi®, UniFi® AP, UniFi Video / airVision®.Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber's local network to the WISP network..120 V AC, 230 V AC Input - 24 V DC, 300 mA Output.Gigabit Ethernet Input Port(s) - Gigabit Ethernet Output Port(s).Ubiquiti Networks PoE Injector (24 VDC, 7.2W)

TRENDnet's 65W 4-Port Gigabit PoE+ Injector, model TPE-147GI, allows users to add PoE+ power to a non-PoE switch. Connect the 4-port PoE+ injector to a non-PoE Gigabit switch, and then run Ethernet cables up to 100 meters (328 ft.) to network four PoE devices. This multi-port gigabit PoE+ injector supplies up to 30W of power to four PoE or PoE+ devices. The fanless design on the 4-port PoE+ injector conveniently eliminates operating noise and lowers energy consumption. GIGABIT PORTS: 4 x gigabit ports (data in) and 4 x gigabit PoE ports (data + PoE out). EASY INSTALLATION: No configuration needed, simply connect a PoE network devices to this 4-port PoE+ injector 4-PORT POE: TRENDnet's 65W 4-Port Gigabit PoE+ Injector supplies up to 30W of power to four PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at) devices at industry PoE standards for greater device interoperability POE DISTANCE: The multi-port gigabit PoE+ injector provides four PoE network connections up to 100m (328 ft.) away from the 4-port PoE injector FANLESS DISTANCE: The fanless design of the gigabit PoE+ Injector eliminates operating noise and lowers energy consumption. TRENDnet MANUFACTURER WARRANTY: TRENDnet backs this product with a 3-Year Manufacturer Warranty. NDAA / TAA compliant (U.S. and Canada only). More from the Manufacturer.4 x Gigabit PoE+ ports (Data + PoE out).65W PoE power budget.Supports both PoE (15.4W) and PoE+ (30W) power.Uses IEEE 802.3af / IEEE 802.3at industry PoE standards for greater device interoperability

Lantronix Ethernet Over 2-Wire Extender With PoE+ provides the ability to quickly and easily upgrade Ethernet networks with modern PoE powered IP devices without the need to replace the existing copper wire infrastructure. The extenders leverage existing 18-24 AWG unshielded twisted pair CAT 5, CAT 3 and other twisted 2-wire phone wire cabling infrastructure to extend the Ethernet network at half Gigabit speeds and provide data and power to IP devices in remote locations, saving time and money over installing new cable. NDAA Compliant, TAA Compliant.Connection for optional power on Remote device.128 Bit AES encryption over 2-wire.IPv4 and IPv6 supported.Client for DHCP, DNS, NTP

HP® Power supply has input voltage rating of 120/230 V AC and current rating of 8.5 Amps. Unit measuring 5.1" x 7.5" x 6.3" is compatible with HP 5400R zl2 switch series..Dimensions: 5.1"(H) x 7.5"(W) x 6.3"(D).Compatibility: HP 5400R zl2 switch series.Output power: 700 W.Input voltage: 120/230 V AC, Input voltage range: 110/240 V AC.Current: 8.5 A.Frequency: 50 - 60 Hz.Certifications & standards: Green compliant: Yes, Green compliance certificate/authority: REACH, WEEE.Weight: 2.44 kg.Warranty: Lifetime limited.HP® Power supply is standard PoE+ power supply for 5400R zl2 switch series, providing up to 700 watts.

Industrial Gigabit PoE Injector - High Speed/High Power 90W - 802.3bt PoE++ 48V-56VDC DIN Rail UPoE/Ultra Power Over Ethernet Injector Adapter -40C to +75C Rugged (POEINJ1G90W).90W POWER BUDGET: Provides up to 90W of auto-negotiated power output for Type 3 and Type 4 PoE/Ultra/UPoE applications like tilt and pan cameras and high power IEEE 802.11ax wireless access points.ROBUST DESIGN: Industrial Power over Ethernet Injector w/MTBF of 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing | Hardened operating temp of -40C to 75C.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This PoE Injector is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: 1 Gbps | 48V-56VDC Power Input | IEEE 802.3af | IEEE 802.3at | IEEE 802.3bt 90W max | PoH (HDBase-T) | uPoE | 10/100/1000 Mbps Auto Negotiation | DIN/Wall Mountable | Redundant Power Input.WIDE STANDARD COMPATIBILITY: High speed Industrial Gigabit PoE Injector compatible w/ IEEE 802.3bt (PoE++) & previous 90W proprietary POE standards including PoH (HDBase-T), Cisco uPoE, Bosch & AXIS.Rugged PoE Injector | 90 Watts Max | IP-30 Aluminum Housing | 18V-56V DC

The EnGenius EPA5060XBT PoE Injector delivers 60-watts of power and 10Gb data communication to compatible network devices up to 328 feet (100m) over Cat5e cable. Compact design with IEEE802.3bt compliance offers easy installation while providing built-in power protection to preserve valuable equipment. IEEE 802.3bt Type 3 compliant IEEE 802.3af/at backward compatible Backward compatible for legacy PoE Supports 10/100/1000 Mbps and 1Gb/2.5Gb/10Gb applications Output power up to 60W over four pairs with auto-detection on power requirement Leverage energy efficient PoE up to 60W with full power capabilities mount use Fan-less design ideal for silent operation Simple plug-and-play installation.Supports 10Gb data transfer for high-performance networks.Backward compatible with legacy PoE standards.Compact, fanless design for silent operation

Cisco™ Power module requires input voltage of 110/220 VAC by providing 54 VDC of output voltage. Power module is adaptable with Cisco™ industrial ethernet 3000 series switches..Cisco Industrial Ethernet 3000 Series Switches.Form factor: DIN-rail mount.Power consumption: Input voltage: 110 - 220 VAC, input voltage range: 88 - 300 VDC, 110 - 220 VAC, output voltage: 54 VDC, frequency: 50/60 Hz, current: 1.2 A.Compatibility: Cisco Industrial Ethernet 3000 series switches.Cisco™ Power module is compatible with Cisco™ industrial ethernet 3000 series switches and requires input voltage of 110/220 VAC by providing 54 VDC of output voltage.

Power up your network with the StarTech 4-Port Gigabit PoE+ Midspan Injector. Designed to deliver both data and power over a single Ethernet cable, this compact hub supports up to four PoE-enabled devices with speeds up to 1000Mbps and power output of up to 30.8W per port. Ideal for IP cameras, access points, and VoIP phones, it features auto-sensing technology for seamless compatibility and plug-and-play setup—no software required. Wall-mountable and TAA compliant, it’s perfect for professional installations where space and power access are limited. Integrated circuit protection ensures safe operation, while LED indicators provide real-time status at a glance..Functions as a PoE+ injector.Supports Gigabit Ethernet with data transfer rates up to 2 Gbps..Operates over wired Ethernet.Connects using standard RJ-45 Ethernet ports for seamless integration..Features four LAN ports for powering and networking multiple PoE devices..Designed for desktop or wall-mount installation in compact environments..2-year manufacturer warranty for parts and labor.

Industrial Gigabit PoE Splitter - 90W High Speed Power over Ethernet PoE+++ Splitter - 12-48V DC Splitter 802.3bt - LAN/RJ45 Ultra PoE to DC Adapter - -40C to +75C (POESLT1G48V).90W POE IEEE802.3bt: Supports IEEE 802.3af (PoE / Type 1), IEEE 802.3at (PoE+ / Type 2), IEEE 802.3bt (PoE++ / Type 3); power out configured w/ DIP switch for 12/16/24/48V DC (1.5A) via terminal block.HIGH POWER GIGABIT PoE SPLITTER: Power non-PoE devices using network infrastructure where power isn't available | Splits PoE connection (max 90W) into RJ45 data & DC power (terminal block).ROBUST DESIGN: Industrial Power over Ethernet Splitter w/MTBF of 600,000+ hrs. @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing | Hardened operating temp of -40C to 75C.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This PoE Splitter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: High Speed 1 Gbps | 1 x RJ45 PoE In | 1 x RJ45 Data Out | 12V-48VDC 1.5A power output | 4 pin Terminal Block Power Out | 10/100/1000 Mbps Auto Negotiation | DIN or Wall Mountable.Rugged PoE Splitter | 12-48V DC | IP-30 Aluminum Housing | 1.5A Power Output

Microchip Power over Ethernet splitters enable easy integration of the Power over Ethernet technology into legacy equipment. Using the same infrastructure, without making any modifications to the end points, already designed devices, such as Wireless LAN access points, Web cameras or IP telephone sets become Power over Ethernet enabled when connected to the active splitter..Supports wireless LAN access points, IP cameras, and phones.Uses existing infrastructure for cost-effective integration.Ensures reliable power and data delivery over Ethernet

TRENDnet's 2-Port Gigabit PoE++ Extender, model TPE-BE200, takes a single PoE++ (60W) connection and extends it an additional 100m (328 ft.) for up to two PoE+ (30W) devices. This dual/multi-port extender auto-detects a PoE (15.4W), PoE+ (30W), or PoE++ (60W) input, and extends it for a total distance of up to 200m (656 ft.) from the PoE source. Daisy chain up to four extenders for a total PoE network extension of up to 500m (1,640 ft.). This gigabit PoE++ range extender features a single PoE++ (60W) input port and two PoE+ (30W) output ports. DEVICE INTERFACE: 1 x Gigabit PoE++ In Port; 2 x Gigabit PoE Out Ports; LED Indicators POE++ POWER: The Gigabit PoE++ Extender extends a PoE++ connection up to 10m (328 ft.) to PoE (15.4W), PoE+ (30W), and PoE++ (60W) devices. No external power required. Powered via Power over Ethernet. GIGABIT PORTS: The 2-Port PoE Extender features one gigabit PoE++ input port and two gigabit PoE+ output ports that extend a single PoE++ connection an additional 100m (328 ft.) to two PoE+ devices. DAISY CHAIN: Daisy chain up to 4 units for a total PoE network extension of up to 500m (1640 ft.). EXTENSION DISTANCES: Extends a PoE/PoE+/PoE++ network connection an additional 100m (328 ft.) for a total distance of up to 200m (656 ft.) from the PoE source COMPATIBLE DEVICES: The extender supports PoE (15.4W), PoE+ (30W), and PoE++ (60W) devices TRENDnet PROTECTION: The TPE-BE200 2-Port Gigabit PoE++ Extender comes with 3 year TRENDnet ManufacturerProtection. More from the Manufacturer.Daisy chain up to 4 units for a total PoE network extension of up to 500m (1,640 ft.).Use a single PoE++ (60W) connection to extend PoE+ (30W) for up to two devices.Supports PoE (15.4W), PoE+ (30W), and PoE++ (60W) devices.Convenient wall mountable design

TRENDnet's TI-IG90 is a reliable IP50 rated Industrial Gigabit PoE++ Injector with hardened components rated for extreme and rugged industrial environments. Connect the TI-IG90 industrial PoE injector to a non-PoE gigabit switch, and then run an Ethernet cable up to 100 meters (328 ft.) to network a PoE device. The TI-IG90 industrial PoE injector supplies power to a PoE, PoE+, or PoE++ (up to 95W) device. This industrial PoE injector features dual redundant power inputs with overload current protection to support zero downtime applications. Both DIN-rail and wall mount hardware are included with the industrial PoE injector. DEVICE INTERFACE: 1 x Gigabit port (10Mbps/100Mbps/1Gbps); 1 x Gigabit PoE++ port (10Mbps/100Mbps/1Gbps); 4- pin power terminal block; LED Indicators NDAA + TAA COMPLIANT: With NDAA and TAA compliant network products, you can plan and install the networking solutions that government customers demand today. (U.S. and Canada only) POE++: Supplies power to a PoE (up to 15.4W), PoE+ (up to 30W), or PoE++ (up to 95W) device. CONNECTION DISTANCE: Connect the TI-IG90 industrial PoE injector to a non-PoE gigabit switch, and then run an Ethernet cable up to 100 meters (328 ft.) to network a PoE device. INDUSTRIAL HARDENED DESIGN: Equipped with a rugged IP50 rated housing, designed to withstand a high degree of vibration and shock, and operate within an extreme temperature range of -40° - 75° C (-40° - 167° F). DIN RAIL & WALL MOUNTS: IP50 rated industrial injector includes DIN-Rail mount and wall mount hardware POWER SUPPLY SOLD SEPARATELY: Use this industrial injector with the compatible power supply model TI-S15052 (Sold Separately) FAULT TOLERANCE: The industrial PoE++ injector features 48 - 57V DC power input with overload current protection GROUNDING POINT: The injector features a grounding point to protect equipment from external electrical surges ELECTRO MAGNETIC COMPLIANCE: Complies with industrial EMS certifications ESD (IEC 61000-4-2): Level 3 Contact: 6kV, Air: 8kV; EFT (IEC 61000-4-4): Power 2kV, Signal: 1kV; Surge (IEC 61000-4-5): Power: 2kV, Signal: 6kV More from the Manufacturer.Power supply sold separately (model: TI-S15052).NDAA / TAA compliant.Redundant power inputs with overload current protection.6kV RJ45 Ethernet surge protection

The Black Box PoE+ midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE+ injectors add power to the Ethernet link and will help you avoid upgrading non-PoE switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device..Supports Gigabit Ethernet data connections for high-speed equipment.Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs.Diagnostic LEDs indicate 802.3at device detection.Powers 802.3at and 802.3af compliant devices

This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports. This mid/end-span injector is capable of transmitting network data and power up to 328ft (100m) for remote installations. The PoE, PoE+, PoE++ compatibility and selectable power output ensure seamless compatibility with Powered Devices (PD). The TAA-compliant injector includes a Universal Power Adapter for different regions. Multiport PoE Injector supports the IEEE 802.3af, 802.3at, and 802.3bt (Type 3 and Type 4) standards for Power Sourcing Equipment (PSE), delivering up to 52V DC and 95Watts. This flexibility eliminates the need for a separate power source for remote networked devices such as IP cameras, access control devices, remote kiosks (POSs), wireless access points, PoE lighting, and digital signage..4-PORT MULTI-GIGABIT POE INJECTOR: Multiport PoE++ injector supports up to 5Gbps (NBASE-T) w/auto-negotiation; TAA-compliant Power Sourcing Equipment (PSE) delivers power & data over Ethernet cable; Supports PoE/PoE+/PoE++ 95W max; Level-4 ESD protection.SELECTABLE POWER OUTPUT: DIP switch allows user to select the power output between auto-negotiation up to 90W, 95W PoH+, or forced legacy 60W (UPoE); 802.3af/802.3at/802.3bt power modes available on all ports; Total power budget of 160 Watts.MULTI-GIGABIT: Supports 5/2.5/1Gbps & 100/10Mbps; 5GBASE-T/2.5GBASE-T compatible; Provide data & power to Powered Devices (PDs) up to 328ft (100m) w/Cat 5e/6/6a cabling; Supports WoL/PXE/9K Jumbo frames; Unmanaged PoE injector streamlines setup & deployment.RUGGED ENCLOSURE: Durable full-metal housing ensures durability; Mount the PoE injector to a wall or a DIN rail with the included bracket; LAN transformers isolate the input/output data, and a power circuit prevents interference between ports.STATUS LEDS: Top-facing color-coded diagnostic LEDs indicate the current PoE mode per Ethernet port and current PoE power budget of the injector for quick at-a-glance status of the system.This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports.

This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports. This mid/end-span injector is capable of transmitting network data and power up to 328ft (100m) for remote installations. The PoE, PoE+, PoE++ compatibility and selectable power output ensure seamless compatibility with Powered Devices (PD). The TAA-compliant injector includes a Universal Power Adapter for different regions. Multiport PoE Injector supports the IEEE 802.3af, 802.3at, and 802.3bt (Type 3 and Type 4) standards for Power Sourcing Equipment (PSE), delivering up to 52V DC and 95Watts. This flexibility eliminates the need for a separate power source for remote networked devices such as IP cameras, access control devices, remote kiosks (POSs), wireless access points, PoE lighting, and digital signage..4-PORT MULTI-GIGABIT POE INJECTOR: Multiport PoE++ injector supports up to 5Gbps (NBASE-T) w/auto-negotiation; TAA-compliant Power Sourcing Equipment (PSE) delivers power & data over Ethernet cable; Supports PoE/PoE+/PoE++ 95W max; Level-4 ESD protection.SELECTABLE POWER OUTPUT: DIP switch allows user to select the power output between auto-negotiation up to 90W, 95W PoH+, or forced legacy 60W (UPoE); 802.3af/802.3at/802.3bt power modes available on all ports; Total power budget of 160 Watts.MULTI-GIGABIT: Supports 5/2.5/1Gbps & 100/10Mbps; 5GBASE-T/2.5GBASE-T compatible; Provide data & power to Powered Devices (PDs) up to 328ft (100m) w/Cat 5e/6/6a cabling; Supports WoL/PXE/9K Jumbo frames; Unmanaged PoE injector streamlines setup & deployment.RUGGED ENCLOSURE: Durable full-metal housing ensures durability; Mount the PoE injector to a wall or a DIN rail with the included bracket; LAN transformers isolate the input/output data, and a power circuit prevents interference between ports.STATUS LEDS: Top-facing color-coded diagnostic LEDs indicate the current PoE mode per Ethernet port and current PoE power budget of the injector for quick at-a-glance status of the system.This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports.

The Black Box PoE+ midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE+ injectors add power to the Ethernet link and will help you avoid upgrading non-PoE switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device..Provides 30W of safe PoE Plus power to each device.Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs.Powers 802.3at and 802.3af compliant devices.Diagnostic LEDs indicate 802.3at device detection

The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.Auto sensing technology delivers 30 Watts to 802.3at PoE+ devices or 15 Watts to 802.3af PoE devices. No need to buy a PoE switch-use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations..Dimensions: 1.4"(H) x 5.2"(W) x 2.5"(D).Features network distances of up-to 328'.Input ports: 1 x RJ-45 10/100/1000Base-T.Output ports: 1 x RJ-45 10/100/1000Base-T.Input voltage: 110/220 VAC, 50/60 Hz.Input current: 650 mA.Output power: 30 W maximum.Form factor: External.Full duplex gigabit speeds, converts a non-PoE ethernet port-to a PoE+ or PoE port.Integrated power supply.Includes gigabit PoE+ injector, quick installation guide, power cord.Certifications and standards: CE, FCC, IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, Green compliance certificate/authority: RoHS, WEEE.Weight: 5.70 oz..Warranty: 3 years limited.TRENDnet® Full duplex Ethernet speed gigabit PoE+ injector features network distances of up-to 328'.

OUTSOURCE 90 delivers the highest power allowed by the POE standard (802.3bt), used for external PTZ IP cameras and other very high-power applications. Delivers maximum remote power to IP cameras & POE devices 802.3bt compliant and GigE compatible 90W Power output Safety assured as POE is only enabled to compliant devices Integrated overload protection Compact, wall-mountable unit Sealed, fanless design for reliability.Complies with IEEE 802.3bt standard for maximum compatibility.Integrated overload protection ensures safe operation.Compact, wall-mountable design with sealed, fanless construction

Upgrade your system with the StarTech 2-Port PCI Express Gigabit Ethernet Adapter, designed to deliver 2.5Gbps multi-gigabit speeds and Power over Ethernet (PoE+) support. Featuring dual Intel I225-V chipsets, this NIC provides up to 30W per port to power devices like IP cameras and access points—no injector needed. Compatible with IEEE 802.3af/at standards, it supports PXE boot, Wake-on-LAN, VLAN tagging, and jumbo frames for efficient network management. With a built-in heatsink, LED indicators, and low-profile bracket included, it’s ideal for desktops and servers in demanding environments..Built as an Ethernet adapter with PCIe interface and supports Gigabit speeds..Delivers up to 2.5Gbps data rate over wired connections; no wireless standard supported..Offers two RJ-45 ports with PoE+ support for connected devices..Compatible with Windows, Linux, and VMware ESXi systems..Complies with IEEE 802.3af/at/bz, 802.1Q, 802.1X, and other key networking standards..2-year manufacturer warranty.

Extend PoE+ power and Gigabit data another 100 m (328 ft.) without an external supply. Daisy‑chain extenders to reach longer distances, forwarding up to 30 W to IEEE 802.3af/at devices..Adds 100 m to a PoE+ link with Gigabit throughput..No additional power supply required (PoE‑powered)..Supports up to 30 W for cameras, APs, and phones..Cascade units to span large installations.

Power Cisco Business Wireless 100/200 series access points and other PoE devices with the CB-PWRINJ-NA 15.4W Single-Port PoE Injector. This unit will support devices that require up to 15.4W of PoE up to 328' away. It complies with the IEEE 802.3af standard and supports 1000 Mb/s passthrough data rates..Watts, Power Supply & Use: Delivers 15.4W PoE, Single-Port PoE Injector.Complies with IEEE 802.3af.Input Voltage: 90 to 264 VAC, 50 / 60 Hz.True Color: Black.Warranty: 1 Year.Power Cisco Business Wireless 100/200 series access points and other PoE devices with the CB-PWRINJ-NA 15.4W Single-Port PoE Injector.

The Axis Communications 5900-334 high PoE midspan with data connectivity, provides an easy and fast solution for powering network video products without the need to install power outlets and electrical cabling. This midspan conforms to the IEEE 802.3at for powering devices with high power requirements on a network. It provides 60 W power and is perfect for use with all Axis network video products featuring built-in PoE support. Midspan enables the network video devices to receive data and power over the same Ethernet cable and makes it easier to install in areas where power cabling and outlets are unavailable..PoE injector.Dimension: 1.5" x 2.4" x 5.9"; Weight: 0.7 lbs..Connectors: shielded RJ45, EIA 568A and 568B power connector C13.Data rate: 10/100/1000 Mbps.Power selector: 15 W or 30 W; Input voltage: 100 to 240 VAC; Frequency: 50-60 Hz.Local LED management display.Maximum output power: 60 W.Network cables: shielded category 5 (or higher).Port interfaces are located on the front panel, Port LED: power indicator and data connectivity.Mounting wall, shelf or DIN rail.Operating conditions: -10 to 45 deg C (14 to 113 deg F).RoHS, REACH, CB, WEEE, CE, EN 55022 Class B, EN 61000 3-2, EN 61000 3-3, EN 55024, FCC Part 15 Subpart B Class B, VCCI Class B.Optional accessories: AXIS midspan DIN clip a mains cable angle C13-open 0.5 m.PoE injector with 10/100/1000 Mbps data rate.

TRENDnet TPE-113GI Gigabit Power over Ethernet Injector.Full Duplex Gigabit speeds supported.Use non-PoE switches to network PoE devices at distances of up to 100 meters.Save on installation and equipment costs.2.75 x 1.8 x 1 in..Create an integrated PoE and non-PoE Gigabit network.3 year mfg. limited warranty.IEEE 802.3ab Gigabit and 802.3af PoE compliant.Gigabit Power over Ethernet (PoE) Injector delivers a PoE signal for distances of up to 100 meters (328 ft.).1 x 10/100/1000 Mbps Auto-MDIX Data In port.1 x 10/100/1000 Mbps PoE Auto-MDIX Data Out port.Power port.Power LED indicator.Supplies power up to 15.4 Watts.Easily install a PoE device where a power outlet is not available.Reduce installation and network equipment costs.Safeguards network devices with short circuit protection.Plug and Play in remote location.Light weight and compact size.Wall mounting points.TRENDnet® 15.4 W Injector merges electrical power with a Gigabit network data signal to product a Gigabit power over Ethernet signal. With plug and play installation.