Single-Port PoE Adapters

Ubiquiti™ Networks™ 48 VDC 24 W Power over Ethernet injector with gigabit LAN port features RJ-45 input/output port to deliver high-speed internet. Injector comes with USA power cord and features an LED display to indicate status of power..Frequency: 47 - 63 Hz, 65 kHz switching.Dimensions: 1.3"(H) x 3.61"(W) x 2.36"(D).Interfaces/ports: Input ports: 1 x RJ-45 ethernet, output ports: 1 x RJ-45 ethernet.Power: Output power: 24 W, input voltage: 110 - 220 VAC, 48 VDC output, input current: 600 mA at 110 VAC, 400 mA at 220 VAC, 500 mA output.Efficiency: 80+%, output ripple: 1%, regulation: + or - 1% line, + or - 3% load, peak pulse current: 36A (10/1000microsecond) data.Operating temperature: -10 - +60 deg C, Operating humidity: 5 - 90% non condensing.Surge protection: Difference and common mode, clamping protection: 11 V data, 60 V power.Shunt capacitance: <5 pf data, response time: <1 nS, 2-pair powering: Pins 4, 5 (+) and pins 7, 8 (-).Compatibility: Rocket-Ti, UAP-Pro.Certifications and standards: IEC 60950-1:2005+A1, UL60950-1, EN55022:2010, EN55024:2010, FCC Class B.Weight: 5.59 oz..Ubiquiti™ Networks™ 48 VDC 24 W Power over Ethernet injector with gigabit LAN port provides earth grounding/surge protection and also helps to protect against ESD attacks.

The Ubiquiti® POE-24-12W-G 24V PoE injector with Gigabit LAN port, powers a variety of PoE devices belonging to the airFiber, airMAX, EdgeMAX, airVision, UniFi and mFi series. This 24 VDC injector provides protection against surge, clamping, peak pulse current, maximum surge discharge and ESD attacks..Power over Ethernet injector provides protection against surge, clamping, peak pulse current.Compatible with Ubiquiti products - airFiber, airMAX, airVision, UniFi, mFi.Interface/ports: Gigabit LAN port.Dimensions: 1.14"H x 3.43"W x 1.73"D.Form factor: Wall mountable.Power supply: Input: 90 - 260 VAC at 47 - 63 Hz, 0.3 A at 120 VAC, 0.2 A at 240 VAC, output: 24 VDC at 0.5 A.Temperature: 0 - 40 deg C operating, -30 - 70 deg C storage, humidity: 35 - 95% non-condensing operating.Meets IEC 60950-1:2005+A1, UL60950-1, EN55022:2010, EN55024:2010, FCC Class B, USA, EU, AR, BR, UL, CCC, Mexico standards.Weight: 3.51 oz.

EnGenius PoE Adapter is easily to power and to network over Ethernet for increasing scalability and reducing installation time and cost. EPA series is a single-port Power over Ethernet (PoE) adapter for use with gigabit system. The ideal solution could assist installers to solve the limitation in designing networks is the availability of power source. The EnGenius PoE adapter allows delivery of both data and power to an Passive 54V- compatible Access Point or device over a single Ethernet cable, allowing deployment of them exactly when users needed to provide the best wireless coverage and at much lower installation cost. Outdoor Networking Facility and Low Port Density Installations The EPA5006GP PoE adapter is Passive 54V, with disconnect, short -circuit and overload protection to assure the securable and reliable connection for Access Points or other PoE devices. By sending maximum 54V/0.6A output, Ethernet terminals which need more power such as wireless LAN high power device, IP media center, and web camera are powered remotely..Provides 54V passive PoE for high-power access points and IP cameras.Includes short-circuit and overload protection for secure connections.Enables flexible deployment in outdoor and low-port-density environments

Sends data and power over a single Ethernet cable Use to power IP phones, security cameras, wireless access points, IP print servers, and other 802.3af-compatible equipment Avoid the cost and hassle of installing AC power at a remote camera or door scanner Supports 10/100/1000-Mbps midspan data connections on RJ-45 input/output Protection includes overvoltage/current overload and short circuit protection on the power output (per 802.3af specifications) Diagnostic LED indicates adverse power conditions Detects unstable current measurements, low voltage, incorrect resistive signature, and more Simple plug-and-play installation Compact, weighs less than half a pound and can be easily wall-mounted RoHS compliant The device has Data In RJ-45 (10/100/1000) and Data/PoE Out RJ-45 (10/100/1000). PoE midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE injectors add power to the Ethernet link and avoid upgrading switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device. This device is designed for desktop or panel mounting and includes a 100-240VAC internal power supply delivering 15W per port..Provides 15 W of safe Power over Ethernet (PoE) Plus power to each device.Supports Gigabit Ethernet data connections for high-speed equipment.Provides overvoltage and overcurrent overload protection as well as short circuit protection on the power output (per 802.3af specifications).Over temperature protection. Shuts down automatically without being damaged

The Black Box PoE+ midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE+ injectors add power to the Ethernet link and will help you avoid upgrading non-PoE switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device..Provides 30W of safe PoE Plus power to each device.Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs.Powers 802.3at and 802.3af compliant devices.Diagnostic LEDs indicate 802.3at device detection

The Black Box PoE+ midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE+ injectors add power to the Ethernet link and will help you avoid upgrading non-PoE switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device..Supports Gigabit Ethernet data connections for high-speed equipment.Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs.Diagnostic LEDs indicate 802.3at device detection.Powers 802.3at and 802.3af compliant devices

TRENDnet's 65W 4-Port Gigabit PoE+ Injector, model TPE-147GI, allows users to add PoE+ power to a non-PoE switch. Connect the 4-port PoE+ injector to a non-PoE Gigabit switch, and then run Ethernet cables up to 100 meters (328 ft.) to network four PoE devices. This multi-port gigabit PoE+ injector supplies up to 30W of power to four PoE or PoE+ devices. The fanless design on the 4-port PoE+ injector conveniently eliminates operating noise and lowers energy consumption. GIGABIT PORTS: 4 x gigabit ports (data in) and 4 x gigabit PoE ports (data + PoE out). EASY INSTALLATION: No configuration needed, simply connect a PoE network devices to this 4-port PoE+ injector 4-PORT POE: TRENDnet's 65W 4-Port Gigabit PoE+ Injector supplies up to 30W of power to four PoE (IEEE 802.3af) or PoE+ (IEEE 802.3at) devices at industry PoE standards for greater device interoperability POE DISTANCE: The multi-port gigabit PoE+ injector provides four PoE network connections up to 100m (328 ft.) away from the 4-port PoE injector FANLESS DISTANCE: The fanless design of the gigabit PoE+ Injector eliminates operating noise and lowers energy consumption. TRENDnet MANUFACTURER WARRANTY: TRENDnet backs this product with a 3-Year Manufacturer Warranty. NDAA / TAA compliant (U.S. and Canada only). More from the Manufacturer.4 x Gigabit PoE+ ports (Data + PoE out).65W PoE power budget.Supports both PoE (15.4W) and PoE+ (30W) power.Uses IEEE 802.3af / IEEE 802.3at industry PoE standards for greater device interoperability

The EnGenius EPA2406GR Gigabit Proprietary Power-over-Ethernet adapter supports high-speed data and up to 14.4 watts of power. Compact port design provides easy installation, and built-in power surge protection preserves valuable equipment. A PoE injector, placed closer to ground level, has a reset button that allows administrators to reset devices conveniently without having to take them down. Gigabit Ethernet in & out ports allow connection of high-speed devices Delivers both data and power to EnGenius outdoor access point PoE injector reset button positioned conveniently near ground level Optimal port design for easy mounting/positioning Compact design Extends power to unwired areas up to 328-ft./100m Disconnect, short-circuit & surge protection assures secure, reliable connections Mounts to walls or ceilings with included hardware.Convenient reset button for easy device management.Compact design for flexible installation.Supports high-speed Gigabit data transfer

The EnGenius EPA5060XBT PoE Injector delivers 60-watts of power and 10Gb data communication to compatible network devices up to 328 feet (100m) over Cat5e cable. Compact design with IEEE802.3bt compliance offers easy installation while providing built-in power protection to preserve valuable equipment. IEEE 802.3bt Type 3 compliant IEEE 802.3af/at backward compatible Backward compatible for legacy PoE Supports 10/100/1000 Mbps and 1Gb/2.5Gb/10Gb applications Output power up to 60W over four pairs with auto-detection on power requirement Leverage energy efficient PoE up to 60W with full power capabilities mount use Fan-less design ideal for silent operation Simple plug-and-play installation.Supports 10Gb data transfer for high-performance networks.Backward compatible with legacy PoE standards.Compact, fanless design for silent operation

Maximum Output Power: 30 W.Form Factor: Desktop.Input Voltage: 24 V DC

An Instant PoE adapter designed for indoor use that transforms almost any Ubiquiti PoE (Power over Ethernet) device into a fully compliant 48V, PoE-compatible product. The Instant PoE Adapter also provides an additional ±15kV of Ethernet isolation for built-in protection that lessens the risk of ESD or surge damage to your devices..This PoE adapter designed for indoor use transforms almost any Ubiquiti PoE (Power over Ethernet) device into a fully compliant 48V PoE compatible product.Dimensions: 3.68"H x 1.06"W x 0.85"D.Provides an additional ±15kV of Ethernet isolation for built-in protection that lessens the risk of ESD or surge damage to your devices

The Logitech PoE Injector with Plug Set (952-000074) is a high-performance Power over Ethernet solution tailored specifically for powering Logitech Tap meeting room touch controllers. By delivering both data and power over a single Ethernet cable, it allows for cleaner installations, eliminating the need for separate power adapters and reducing cable clutter. The injector complies with IEEE 802.3af/at standards, providing up to 30W of reliable power, and includes an international plug set for global deployment. Whether used in corporate boardrooms or collaborative spaces, this PoE injector ensures seamless and professional AV integration. It's also compliant with energy and environmental standards like RoHS and WEEE, making it a dependable and eco-conscious choice for modern workplaces..Simplified Cabling for Logitech Tap: Delivers both power and data over a single Cat5e cable, eliminating the need for a separate power outlet at the table.Extended Reach: Supports cable runs up to 131.23 ft (40 meters), allowing flexible placement of Logitech Tap in larger or uniquely configured meeting rooms.Clean and Professional Installations: Reduces cable clutter with precise cable lengths and compatibility with all Logitech Tap mounts, including Table, Riser, and Wall Mounts.Plug-and-Play Integration: Designed specifically for Logitech Tap, ensuring seamless connectivity and reliable performance in any meeting room setup.Included 10m Cable: Comes with a 32.81 ft (10 meters) Cat5e cable, or use your own for custom-length installations.Universal Power Supply: Includes a 100–240V auto-switching power supply with international adapters for global deployment.Ideal for Modern Conference Rooms: Perfect for Microsoft Teams Rooms, Zoom Rooms, and Google Meet setups requiring clean, efficient cable management

The Ubiquiti Networks PoE Injector is designed for the company's airFiber, airMAX, EdgeMAX, mFi, UniFi AP, and UniFi Protect / airVision products. This 24 VDC, 7.2W, 0.3A adapter provides protection against surge, clamping, maximum surge discharge, and peak pulse current..Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including: airFiber®, airMAX®, EdgeMAX®, mFi®, UniFi® AP, UniFi Video / airVision®.Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber's local network to the WISP network..120 V AC, 230 V AC Input - 24 V DC, 300 mA Output.Gigabit Ethernet Input Port(s) - Gigabit Ethernet Output Port(s).Ubiquiti Networks PoE Injector (24 VDC, 7.2W)

This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports. This mid/end-span injector is capable of transmitting network data and power up to 328ft (100m) for remote installations. The PoE, PoE+, PoE++ compatibility and selectable power output ensure seamless compatibility with Powered Devices (PD). The TAA-compliant injector includes a Universal Power Adapter for different regions. Multiport PoE Injector supports the IEEE 802.3af, 802.3at, and 802.3bt (Type 3 and Type 4) standards for Power Sourcing Equipment (PSE), delivering up to 52V DC and 95Watts. This flexibility eliminates the need for a separate power source for remote networked devices such as IP cameras, access control devices, remote kiosks (POSs), wireless access points, PoE lighting, and digital signage..4-PORT MULTI-GIGABIT POE INJECTOR: Multiport PoE++ injector supports up to 5Gbps (NBASE-T) w/auto-negotiation; TAA-compliant Power Sourcing Equipment (PSE) delivers power & data over Ethernet cable; Supports PoE/PoE+/PoE++ 95W max; Level-4 ESD protection.SELECTABLE POWER OUTPUT: DIP switch allows user to select the power output between auto-negotiation up to 90W, 95W PoH+, or forced legacy 60W (UPoE); 802.3af/802.3at/802.3bt power modes available on all ports; Total power budget of 160 Watts.MULTI-GIGABIT: Supports 5/2.5/1Gbps & 100/10Mbps; 5GBASE-T/2.5GBASE-T compatible; Provide data & power to Powered Devices (PDs) up to 328ft (100m) w/Cat 5e/6/6a cabling; Supports WoL/PXE/9K Jumbo frames; Unmanaged PoE injector streamlines setup & deployment.RUGGED ENCLOSURE: Durable full-metal housing ensures durability; Mount the PoE injector to a wall or a DIN rail with the included bracket; LAN transformers isolate the input/output data, and a power circuit prevents interference between ports.STATUS LEDS: Top-facing color-coded diagnostic LEDs indicate the current PoE mode per Ethernet port and current PoE power budget of the injector for quick at-a-glance status of the system.This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports.

The Ubiquiti EdgePoint PoE injector provides a variety of features to help protect your PoE devices: surge protection, clamping protection, maximum surge discharge, peak pulse current, AC cable with earth ground..PoE injector with a variety of features to help protect your PoE devices.Compatible with airFiber, airMAX, EdgeMAX, mFi, UniFi AP, UniFi Protect, airVision, UniFi LED, UFiber.Dimensions: 1.34"H x 4.84"W x 2.56"D.Comes in white.Offers 80W of power to an Ethernet cable for PoE devices.Contains 1 x Gigabit Ethernet RJ45 LAN and 1 x PoE ports.Output voltage: 54VDC/1.5A.Rated voltage: 100-240VAC, 50/60Hz.Surge protection: difference and common Mode.Meets or exceeds the CE, FCC, IC and UL standards

Ubiquiti 30W PoE+ adapter can power UniFi PoE+ devices with wireless mesh applications, or offload PoE switch power dependencies. Comes in white..30W PoE+ adapter can power UniFi PoE+ devices with wireless mesh applications, or offload PoE switch power dependencies.Compatible with U7-Pro, U7-Pro-Wall, U7-Outdoor, U6-Enterprise, U6-LR, U6-Enterprise-IW, U6-IW, UTP-TouchMax, UVC-AI-DSLR, and UVC-AI-Pro devices.Dimensions: 3.66"H x 2.44"W x 1.38"D.Comes in white.Surge, peak pulse, and overcurrent protection.Contains RJ45 data input, AC cable with earth ground, and PoE+ output.LED indicator for status monitoring.Rated voltage: 100-240VAC at 50/60Hz.Output voltage: 48VDC at 0.65A.Meets or exceeds the CE, FCC, IC, and UL standards