PoE Ethernet Adapters

Axis Communications® 5026-401 T8640 POE+ Ethernet over coax adapter enables IP communication over existing Coax video cabling. Converts an analog system to digital and offers standard PoE and centrally sourced power without any new cables. Comes with diagnostics LEDs for power and link status in both base and device unit..Suitable for installation of network cameras.Measures 4.1" x 2.2" x 0.9".Provides BNC 75 ohm coaxial connection and has shielded ethernet RJ-45, EIA 568A or 568B for convenience.Has 100Base-TX full duplex Ethernet cable and offers 100 + 100 Mbps symmetrical to full range coaxial cable data rate.100Base-TX Full duplex coaxial type Ethernet cable delivers 100+100Mbps symmetrical to full range data rate.PoE AXIS T8642 enabled to detect devices up to 25.5 W power.Has network indicators, power indicators, plug-and-play installation, wall/rack/din rail mounting and detects PoE automatically.Operates at 14 - 122 deg F temperature and has storage temperature of -40 to 165 deg F.Meets IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE, FCC part 15 and Class B with FTP cabling standards.Certifications and standards: IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE, FCC part 15, Class B with FTP cabling, EN 55022 Class B, (Emissions, PoE powered), EN 55022 Class A (Emissions, DC powered), EN 55024 (Immunity).Weight: 0.3 lbs..Axis Communications® T8640 POE+ Ethernet over coax adapter is perfect for installation of network cameras. Full network connection is delivered and features durable construction.

The Ubiquiti® POE-24-12W-G 24V PoE injector with Gigabit LAN port, powers a variety of PoE devices belonging to the airFiber, airMAX, EdgeMAX, airVision, UniFi and mFi series. This 24 VDC injector provides protection against surge, clamping, peak pulse current, maximum surge discharge and ESD attacks..Power over Ethernet injector provides protection against surge, clamping, peak pulse current.Compatible with Ubiquiti products - airFiber, airMAX, airVision, UniFi, mFi.Interface/ports: Gigabit LAN port.Dimensions: 1.14"H x 3.43"W x 1.73"D.Form factor: Wall mountable.Power supply: Input: 90 - 260 VAC at 47 - 63 Hz, 0.3 A at 120 VAC, 0.2 A at 240 VAC, output: 24 VDC at 0.5 A.Temperature: 0 - 40 deg C operating, -30 - 70 deg C storage, humidity: 35 - 95% non-condensing operating.Meets IEC 60950-1:2005+A1, UL60950-1, EN55022:2010, EN55024:2010, FCC Class B, USA, EU, AR, BR, UL, CCC, Mexico standards.Weight: 3.51 oz.

Ubiquiti™ Networks™ 48 VDC 24 W Power over Ethernet injector with gigabit LAN port features RJ-45 input/output port to deliver high-speed internet. Injector comes with USA power cord and features an LED display to indicate status of power..Frequency: 47 - 63 Hz, 65 kHz switching.Dimensions: 1.3"(H) x 3.61"(W) x 2.36"(D).Interfaces/ports: Input ports: 1 x RJ-45 ethernet, output ports: 1 x RJ-45 ethernet.Power: Output power: 24 W, input voltage: 110 - 220 VAC, 48 VDC output, input current: 600 mA at 110 VAC, 400 mA at 220 VAC, 500 mA output.Efficiency: 80+%, output ripple: 1%, regulation: + or - 1% line, + or - 3% load, peak pulse current: 36A (10/1000microsecond) data.Operating temperature: -10 - +60 deg C, Operating humidity: 5 - 90% non condensing.Surge protection: Difference and common mode, clamping protection: 11 V data, 60 V power.Shunt capacitance: <5 pf data, response time: <1 nS, 2-pair powering: Pins 4, 5 (+) and pins 7, 8 (-).Compatibility: Rocket-Ti, UAP-Pro.Certifications and standards: IEC 60950-1:2005+A1, UL60950-1, EN55022:2010, EN55024:2010, FCC Class B.Weight: 5.59 oz..Ubiquiti™ Networks™ 48 VDC 24 W Power over Ethernet injector with gigabit LAN port provides earth grounding/surge protection and also helps to protect against ESD attacks.

The Ubiquiti Networks POE-50-60W PoE Adapter is a high-performance power solution designed to deliver reliable 50V, 60W output to a wide range of Ubiquiti PoE-enabled devices, including airFiber, airMAX, airVision, UniFi, and mFi series. Engineered for seamless integration into professional network environments, this adapter features a built-in Gigabit LAN port for high-speed data transmission and supports a wide input voltage range of 90–260V AC at 50/60 Hz, making it ideal for global deployments. Advanced surge protection, clamping, peak pulse current handling, and ESD shielding ensure your network stays protected against electrical threats. The compact and lightweight design (4.0 x 2.4 x 1.3 inches, 6.8 oz) allows for easy installation in tight spaces, while earth grounding support adds an extra layer of operational safety. With an operating temperature range of 32°F to 104°F (0°C to 40°C) and 35–95% humidity tolerance, the POE-50-60W is built to perform in demanding conditions. Backed by a 1-year limited warranty, this PoE adapter is the perfect choice for powering Ubiquiti devices with efficiency, safety, and speed..Powerful 50V, 60W Output: Delivers reliable Power over Ethernet (PoE) for a wide range of Ubiquiti devices including airFiber, airMAX, airVision, UniFi, and mFi series.Integrated Gigabit LAN Port: Ensures high-speed data transmission with full Gigabit Ethernet support.Advanced Surge & ESD Protection: Built-in safeguards against surge, clamping, peak pulse current, and electrostatic discharge for enhanced device safety.Wide Input Voltage Range: Operates on 90–260V AC, 50/60 Hz, making it suitable for global deployments.Earth Grounding Support: Provides additional protection and stability in professional network environments.Compact & Lightweight Design: Measures just 4.0 x 2.4 x 1.3 inches and weighs 6.8 oz for easy integration into any setup.Reliable Operating Conditions: Functions in temperatures from 32°F to 104°F (0°C to 40°C) and 35–95% humidity.IEEE 802.3af Backward Compatibility: Supports legacy PoE devices while delivering robust performance.Ideal for Ubiquiti Ecosystems: Optimized for seamless use with Ubiquiti’s networking hardware—ensuring compatibility and performance.1-Year Limited Warranty: Backed by Ubiquiti’s manufacturer warranty for peace of mind.Ubiquiti™ Networks™ 50 VDC 60 W Power over Ethernet injector provides earth grounding/surge protection and also helps to protect against ESD attacks.

The EnGenius EPA2406GR Gigabit Proprietary Power-over-Ethernet adapter supports high-speed data and up to 14.4 watts of power. Compact port design provides easy installation, and built-in power surge protection preserves valuable equipment. A PoE injector, placed closer to ground level, has a reset button that allows administrators to reset devices conveniently without having to take them down. Gigabit Ethernet in & out ports allow connection of high-speed devices Delivers both data and power to EnGenius outdoor access point PoE injector reset button positioned conveniently near ground level Optimal port design for easy mounting/positioning Compact design Extends power to unwired areas up to 328-ft./100m Disconnect, short-circuit & surge protection assures secure, reliable connections Mounts to walls or ceilings with included hardware.Convenient reset button for easy device management.Compact design for flexible installation.Supports high-speed Gigabit data transfer

The N-GXE-POE-xx-01 Series is a Fiber Gigabit Ethernet PCIe Network Interface Card (NIC) which provides connectivity to a secure fiber network while also delivering power to a PoE powered device (PD), such as a VoIP phone, with a copper UTP interface. It fully complies with all IEEE 802.3z and 1000Base-X standards, providing up to 2000 Mbps full-duplex bandwidth capacity. Developed to support high-end users, this (2) port NIC has (1) 1000Base-X fiber network interface port (SFP version is 100/1000Base-X) and (1) switched 10/100/1000Base-T port supporting IEEE 802.3at PoE+ power. It is designed to allow a PC to power a VoIP phone, or any other traditional copper powered device, over a secure fiber network. Additionally, the NIC also has the ability to provide traffic switching functions between the copper and fiber ports, even when the PC is in a sleep mode. Combining the functions of PC connectivity and VoIP phone connectivity into one device saves installation time, expense, and the space of having two devices at the desktop. When the VoIP traffic is filtered and prioritized by third-party devices like an Ethernet switch and the IP phone, this PoE NIC will pass all tagged traffic ensuring users experience a high level of Quality of Service (QoS). VLANs and Prioritization can also be configured at the NIC via Lantronix' PoE NIC utility software..Supports Full-duplex Mode.Supports IEEE 802.3x Full-Duplex Flow Control.Supports PCIe x1 bus.Compliant with PCIe Rev 2.1 Interface

Power your video bar and send data with a single cable using this PoE++ 65W 2.5G Adapter with Cat 6a Cable and Power Cable for Video Bar from Poly. The adapter supports PoE++ to inject power into your Ethernet signal connecting a Poly Video Bar, such as an X32 or V12 that do not have built-in PoE functionality, to your PoE++ enabled network. It supports 2.5 Gb/s Ethernet speeds and includes a 12' long Cat 6a Ethernet cable and a mains power cable..Power over Ethernet (PoE++) injector adapter designed to supply both power and network connectivity to compatible Poly devices over a single Ethernet cable.Includes PoE++ injector unit, 12ft Cat 6a Ethernet Cable and AC power cord.1x Ethernet input port, 1x PoE++ Ethernet output port, and AC power input

Lantronix Ethernet Over 2-Wire Extender With PoE+ provides the ability to quickly and easily upgrade Ethernet networks with modern PoE powered IP devices without the need to replace the existing copper wire infrastructure. The extenders leverage existing 18-24 AWG unshielded twisted pair CAT 5, CAT 3 and other twisted 2-wire phone wire cabling infrastructure to extend the Ethernet network at half Gigabit speeds and provide data and power to IP devices in remote locations, saving time and money over installing new cable. NDAA Compliant, TAA Compliant.Connection for optional power on Remote device.128 Bit AES encryption over 2-wire.IPv4 and IPv6 supported.Client for DHCP, DNS, NTP

This StarTech POEEXT1GAT Gigabit PoE+ extender features compact, wall-mountable and rugged metal housing that offers better performance in harsh environments. The extender is equipped with plug-and-play technology, so you won't need to install software or run programs to get it up and running. It is perfect for Wi-Fi access points, IP phones, surveillance cameras and kiosks where a power connection is not available. This extender automatically detects your connected PD to prevent damage if incorrectly installed..Network extender is perfect for Wi-Fi® access points, IP phones, surveillance cameras, and kiosks where a power connection is not available.Dimensions: 1"H x 2.7"W x 3.7"D, Cable length: 328'.Black with steel for durability and corrosion resistance.2-x RJ-45 female interfaces/ports.PoE IN, LNK/ACT, PoE OUT LED indicators offer easy monitoring.Power supply: 52 - 56 VDC (input), Power consumption: 3.2 W max, Power source: PoE-powered.Environmental conditions: 0 - 50 deg C (operating), -10 - 85 deg C (storage), Humidity - 5 - 95% RH.Compatible networks: 10/100/1000 Mbps, Flow control: Half-duplex back-pressure, IEEE 802.3x pause frame for full duplex.Data transfer rate: 2 Gbps (full duplex).Surge protection: EN61000-4-2 (ESD) - 2 kV, EN61000-4-5 (surge) - 2 kV, Switching architecture: Store-and-forward.Auto MDIX, auto-negotiation, full duplex support for better performance.Includes gigabit power over Ethernet extender, instruction manual.Meets IEEE 802.3af PoE, IEEE 802.3at PoE+, EEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T certification and standards.Weight: 6.6 oz..Comes with 2 years warranty.The StarTech Gigabit PoE+ extender extends your PoE PDs over longer distances by daisy-chaining four extenders up to 500m.

EnGenius PoE Adapter is easily to power and to network over Ethernet for increasing scalability and reducing installation time and cost. EPA series is a single-port Power over Ethernet (PoE) adapter for use with gigabit system. The ideal solution could assist installers to solve the limitation in designing networks is the availability of power source. The EnGenius PoE adapter allows delivery of both data and power to an Passive 54V- compatible Access Point or device over a single Ethernet cable, allowing deployment of them exactly when users needed to provide the best wireless coverage and at much lower installation cost. Outdoor Networking Facility and Low Port Density Installations The EPA5006GP PoE adapter is Passive 54V, with disconnect, short -circuit and overload protection to assure the securable and reliable connection for Access Points or other PoE devices. By sending maximum 54V/0.6A output, Ethernet terminals which need more power such as wireless LAN high power device, IP media center, and web camera are powered remotely..Provides 54V passive PoE for high-power access points and IP cameras.Includes short-circuit and overload protection for secure connections.Enables flexible deployment in outdoor and low-port-density environments

Sends data and power over a single Ethernet cable Use to power IP phones, security cameras, wireless access points, IP print servers, and other 802.3af-compatible equipment Avoid the cost and hassle of installing AC power at a remote camera or door scanner Supports 10/100/1000-Mbps midspan data connections on RJ-45 input/output Protection includes overvoltage/current overload and short circuit protection on the power output (per 802.3af specifications) Diagnostic LED indicates adverse power conditions Detects unstable current measurements, low voltage, incorrect resistive signature, and more Simple plug-and-play installation Compact, weighs less than half a pound and can be easily wall-mounted RoHS compliant The device has Data In RJ-45 (10/100/1000) and Data/PoE Out RJ-45 (10/100/1000). PoE midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE injectors add power to the Ethernet link and avoid upgrading switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device. This device is designed for desktop or panel mounting and includes a 100-240VAC internal power supply delivering 15W per port..Provides 15 W of safe Power over Ethernet (PoE) Plus power to each device.Supports Gigabit Ethernet data connections for high-speed equipment.Provides overvoltage and overcurrent overload protection as well as short circuit protection on the power output (per 802.3af specifications).Over temperature protection. Shuts down automatically without being damaged

What This Product Does The PoE Injector POE150S (TL-POE150S) fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK's POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc. More from the Manufacturer.Auto-determine the necessary power requirements.Gigabit speed support.Plug-and-Play, no configuration required

The EnGenius power-over-Ethernet adapter is suitable for connecting APs, IP cameras, VoIP phones and more. This adapter has an optimal port design that ensures easy, precise mounting or positioning. It has 2 Gigabit Ethernet ports that help in connecting to a switch and PoE-enabled device. The built-in surge protection assures maximum security to your valuable network equipment from electrostatic discharge and lightning strikes. The included hardware provides easy placement of your adapter on walls, structured wiring enclosures and ceilings. It extends the power to the unwired areas up to 328'..Meets IEC 60950-1:2005+A1, UL60950-1, ENS55022:2010, EN55024:2010, FCC part 15 class B, FCC and CE standards and certifications.Physical interface: (1) Gigabit data port, (1) Gigabit data & power output port, (1) IEC-320 C6 AC connector.Power on green LED.Wall mounting and includes anchors and screws.Electrical rating: 100 to 240 VAC input voltage, 0.8 A Max for 100 VAC Input Current, 47-63 Hz AC input frequency, 32.8 W maximum output power.Power lines: Pin4, 5: 54 V, Pin7, 8: Return.Includes EPA5006GP and power cord.Comes with 1 year warranty.Single port gigabit power-over-ethernet adapter will disconnect, short-circuit and surge protection ensures reliable, secure connections.

Quickly adds four independent Gigabit Ethernet ports with PoE through an available PCI Express slot to server or desktop systems Adds four independent Gigabit Ethernet ports through an available PCI Express slot to server or desktop systems, with Power over Ethernet capability Intel I350-T4 chipset supports reliable and advanced network connectivity Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support Supports IEEE 802.3at PoE+ standard, with up to 30W power output per port Supports IEEE 802.3az Energy Efficient Ethernet (EEE) Supports PXE network boot Features innovative power management including Energy Efficient Ethernet (EEE) and DMA Coalescing to increase efficiency and reduce power consumption Supports IEEE standard 802.1Q for VLAN Advanced Configuration and Power Interface (ACPI) power management states and wake-up capability Advanced Power Management (APM) wake-up functionality Supports 12V mini-fit 6-pin power connector input Powered device (PD) auto detection and classification Fits both standard height and low profile system chassis with the included full size and spare low profile brackets.Intel I350-T4 chipset supports reliable and advanced network connectivity.Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support.Supports IEEE 802.3at PoE+ standard, with up to 30W power output per port.Supports IEEE 802.3az Energy Efficient Ethernet (EEE)

The StarTech POEINJ4G black PoE+ injector helps to deliver power and data to four power over Ethernet devices using this wall-mountable PoE+ midspan hub. It supports 10/100/1000 Mbps networks/devices as well as auto-negotiation and auto-MDIX. Features flexible setup and comes with a desktop-sized or wall-mountable metal housing for durability. PoE+ injector automatically detects the powered device to offer the appropriate level of power output..PoE injector is perfect for powering a Wireless Access Point (WAP) in a business environment.Dimensions: 3.7"H x 2.8" W x 1"D.Compatible with IP cameras, IP phones and wireless access points.Comes in black color.Easily connect, power, and operate up to four gigabit PoE-powered devices (PD).Delivers full power to each port - up to 30.8 W (802.3at) or 15.4 W (802.3af) to each connected device.Flexible setup, with a desktop-sized, or wall mountable metal housing for user convenience.Plug and-play setup for reliable operation.Automatically detects the powered device to provide the appropriate level of power output.Circuit protection prevents power interference between each port.Support for 10/100/1000 Mbps networks and devices, as well as Auto-Negotiation and auto MDIX.Enable remote installation of touchscreens, information kiosks, and phones in locations where a power connection is not available.Has 8 - RJ-45 female connectors, 4 ports and 1 power/4 PoE in-use LED indicators.Power supply: 100 -240VAC (input), 52VDC (output ), Current: 2-1A (input), 2.31A (output), Power consumption: 120W max, Power output: 52VDC at 30.8W.Temperature: -10 - 70 deg C (storage), 0 - 50 deg C (operating), Humidity: 5 - 95% RH (non-condensing).Includes 1 x 4-port gigabit PoE+ Injector, 1 x universal power adapter, 3 x power cords (NA/UK/EU), instruction manual.Meets RoHS compliant, FC, CE certification and standards.Weight: 7.2 oz.Comes with 2 years warranty.The StarTech black PoE+ injector is suitable for almost all PoE device classes, including wireless access points, as well as IP phones and cameras.

Tenda PoE Injector 48V, IEEE802.3at Gigabit PoE Injector up to 30W, Compatible with IEEE 802.3af, RJ45 Port, Passive PoE 10 / 100Mbps, Distance Up to 100 Meters.High Speed Gigabit Ports Experience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port plus 1× Gigabit Ethernet Output port..802.3at/af PoE Compliant PoE30G-AT supplies power and data with one single ethernet cable to 802.3at/af PoE devices and expands network to areas with no power lines or outlets..Auto Detect Power With Auto Detect technology, PoE30G-AT determines and delivers the exact power supply to your devices with up to 30W power output..Long Range Transmission Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large area..Convert Non-PoE to PoE With no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of PoE30G-AT..Plug and Play Installation no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios..Tenda's product comes with an industry-leading 5-year warranty, accompanied by complimentary lifetime dedicated technical support. Please feel free to contact us via phone or email.

The Brainboxes ES-446 1-port RS232 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 to 1000000 baud. It features point-to-point Tx/Rx modes and has DB9 9 pin male connector. This device server features EIA - RS232 standard operating distance and is compatible with Microsoft Windows 10/8/7/Server 2008/Vista/XP/2000 operating system..Drive server provides access to one RS232 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, power consumption: 1.5 W typical, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE, IP-30, TAA, Green compliance, RoHS and WEEE certifications & standards.Interface: One RS232 serial port, one Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: EIA - RS232 standard, Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty.Black

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance, a switch is normally used as a repeater, or optical fiber may be used. To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable, and forward the rest to the camera. Dependent on midspan and camera type, the connection in total can be between 200-400 meters (656-1312 ft.)..Input Ports: 1 10/100Base-T.Output Ports: 1 10/100Base-T.Weight (Approximate): 1.59 oz

The EnGenius EPA5060XBT PoE Injector delivers 60-watts of power and 10Gb data communication to compatible network devices up to 328 feet (100m) over Cat5e cable. Compact design with IEEE802.3bt compliance offers easy installation while providing built-in power protection to preserve valuable equipment. IEEE 802.3bt Type 3 compliant IEEE 802.3af/at backward compatible Backward compatible for legacy PoE Supports 10/100/1000 Mbps and 1Gb/2.5Gb/10Gb applications Output power up to 60W over four pairs with auto-detection on power requirement Leverage energy efficient PoE up to 60W with full power capabilities mount use Fan-less design ideal for silent operation Simple plug-and-play installation.Supports 10Gb data transfer for high-performance networks.Backward compatible with legacy PoE standards.Compact, fanless design for silent operation

Adds PoE Devices to Your LAN Without a PoE Switch: Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling. Saves You Time and Money on Unnecessary Equipment Updates: This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. Expand Your Wireless Network Up to 328 ft.: The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, overloads and power surges. Simple Plug-and-Play Installation Has Your Device Connected in Minutes: No configuration or software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to the shielded RJ45 Data port and your PoE device to the shielded RJ45 Power + Data port using existing Cat5e/6/6a cable. Connect the unit's C14 inlet to a NEMA 5-15R outlet using the included power cord. LEDs indicate the unit is receiving power and is ready to transmit data. Designed for Installation Almost Anywhere: Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation. 3-Year Warranty and Environmentally Responsible Design: The NPOE-30W-1G comes with a 3-year warranty. It's manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite's commitment to environmental responsibility..PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch..Saves money by delivering 30W of power + data up to 328 ft. through existing cabling.Extends power + data to any PoE or PoE+ device installed where no AC outlet is available.Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps.Quick and easy plug-and-play installation with no configuration necessary.Compact, hand-sized plastic housing ready for mounting on any smooth surface

TRENDnet's 10G PoE++ Injector, model TPE-319GI, combines electrical power with a 10GBASE-T network connection to produce a 10G PoE++ network signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE, PoE+ and PoE++ devices. Connect the 10G PoE++ injector to a non-PoE switch, and then run an Ethernet cable with data + power to network a PoE, PoE+ or PoE++ device up to 100 meters (328 ft.) over cat6a or better cabling. Network PoE devices such as wireless access points, IP cameras, VoIP phone systems, IPTV decoders, access controls, and more. DEVICE INTERFACE: 1 x 10GBASE-T port (data); 1 x 10GBASE-T PoE+ port (data + power); Integrated Power Supply POE++: The 10G PoE++ injector supplies a PoE device with PoE (15.4W), PoE+ (30W), or PoE++ (90W) power EXPERIENCE 10G SPEEEDS: The PoE++ Injector converts a non-PoE port to a PoE++ 10G port over existing Cat6a or better cabling. EASY INSTALLATION: Simply connect the 10G PoE++ injector to your network switch and PoE device - no configuration needed. INSTALLATION FLEXIBILITY: The wall-mount design and a sturdy metal enclosure accommodates most installations scenarios. POE DISTANCE: Network a PoE, PoE+ or PoE++ device up to 100 meters (328 ft.) with this injector over cat6a or better cabling 10GBASE-T: The 10G injector is 10GBASE-T compliant and equipped with a 10GBASE-T RJ-45 Port IEEE 802.3af and 802.3at compliant..Supplies PoE (15.4W), PoE+ (30W), or PoE++ (90W).10GBASE-T complian.Integrated power supply.Network a PoE device up to 100m (328 ft.) over cat6a or better cabling

The Black Box PoE+ midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE+ injectors add power to the Ethernet link and will help you avoid upgrading non-PoE switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device..Supports Gigabit Ethernet data connections for high-speed equipment.Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs.Diagnostic LEDs indicate 802.3at device detection.Powers 802.3at and 802.3af compliant devices

Higher Network Speed Boosts Network Performance Zyxel PoE injectors are here to meet the increasing demand for connections to high-speed networking devices such as WiFi 7 and WiFi 6 APs, surveillance PTZ cameras, and advanced POS terminals. The PoE12-30W supports network speeds of up to 2.5Gbps, while both the PoE12-60W* and PoE12-90W support network speeds of up to 10Gbps. Larger Power Budget Powers More PD Devices The PoE12-30W complies with the IEEE 802.3at PoE+ standard, while the PoE12-60W and PoE12-90W comply with the IEEE 802.3bt PoE++ standard to provide PoE power budgets of up to 30W, 60W, and 90W, respectively. They ensure interoperability and compatibility with other standard-based PoE-capable devices. Easy to Use with Robust Protection These three PoE injectors make it easy to connect network devices without any configuration. The wall-mount and desktop designs accommodate most installation scenarios. They have overload and short circuit protection, which shuts down the power immediately if those issues occur, leaving no damage to your equipment..PoE12-60W: 60 W power budget.PoE12-60W: Complies with IEEE 802.3bt PoE++ 60 W standard.Easy plug-and-play desktop or wall-mounted installation.Overloading and short-circuit protection

Upgrade your system with the StarTech 2-Port PCI Express Gigabit Ethernet Adapter, designed to deliver 2.5Gbps multi-gigabit speeds and Power over Ethernet (PoE+) support. Featuring dual Intel I225-V chipsets, this NIC provides up to 30W per port to power devices like IP cameras and access points—no injector needed. Compatible with IEEE 802.3af/at standards, it supports PXE boot, Wake-on-LAN, VLAN tagging, and jumbo frames for efficient network management. With a built-in heatsink, LED indicators, and low-profile bracket included, it’s ideal for desktops and servers in demanding environments..Built as an Ethernet adapter with PCIe interface and supports Gigabit speeds..Delivers up to 2.5Gbps data rate over wired connections; no wireless standard supported..Offers two RJ-45 ports with PoE+ support for connected devices..Compatible with Windows, Linux, and VMware ESXi systems..Complies with IEEE 802.3af/at/bz, 802.1Q, 802.1X, and other key networking standards..2-year manufacturer warranty.

Microchip Power over Ethernet splitters enable easy integration of the Power over Ethernet technology into legacy equipment. Using the same infrastructure, without making any modifications to the end points, already designed devices, such as Wireless LAN access points, Web cameras or IP telephone sets become Power over Ethernet enabled when connected to the active splitter..Supports wireless LAN access points, IP cameras, and phones.Uses existing infrastructure for cost-effective integration.Ensures reliable power and data delivery over Ethernet

The Black Box PoE+ midspan injectors are used in Enterprise applications to power VoIP phones, wireless access points, IP security cameras and more. PoE+ injectors add power to the Ethernet link and will help you avoid upgrading non-PoE switch infrastructure. PoE enables you to avoid installing AC power at a remote powered device..Provides 30W of safe PoE Plus power to each device.Ideal for multi-radio wireless access points, PTZ security cameras, IP phones containing streaming video displays, and LCDs.Powers 802.3at and 802.3af compliant devices.Diagnostic LEDs indicate 802.3at device detection

Higher Network Speed Boosts Network Performance Zyxel PoE injectors are here to meet the increasing demand for connections to high-speed networking devices such as WiFi 7 and WiFi 6 APs, surveillance PTZ cameras, and advanced POS terminals. The PoE12-30W supports network speeds of up to 2.5Gbps, while both the PoE12-60W* and PoE12-90W support network speeds of up to 10Gbps. Larger Power Budget Powers More PD Devices The PoE12-30W complies with the IEEE 802.3at PoE+ standard, while the PoE12-60W and PoE12-90W comply with the IEEE 802.3bt PoE++ standard to provide PoE power budgets of up to 30W, 60W, and 90W, respectively. They ensure interoperability and compatibility with other standard-based PoE-capable devices. Easy to Use with Robust Protection These three PoE injectors make it easy to connect network devices without any configuration. The wall-mount and desktop designs accommodate most installation scenarios. They have overload and short circuit protection, which shuts down the power immediately if those issues occur, leaving no damage to your equipment..PoE12-30W: 30 W power budget.PoE12-30W: Complies with IEEE 802.3at PoE+ standard.Easy plug-and-play desktop or wall-mounted installation.Overloading and short-circuit protection

The TP-LINK PoE+ Injector TL-POE160S fully complies with IEEE 802.3af/at standards and can work with all IEEE 802.3af/at PoE compliant PDs (Powered Devices) and PoE receiver adapters (such as TP-LINK's TL-POE10R or other equivalent product) to expand your network to where there are no power line or outlet, where you wish to fix a device such as AP, IP Camera or IP Phone, and more..PoE+ injector reduces infrastructure costs by transmitting data and power simultaneously via Ethernet cable.Works with all IEEE 802.3af/at PoE compliant powered devices and PoE receiver adapters.Comes in black.Two Gigabit ports ensure faster transmission.Complies with IEEE802.3af/at standards, supplies up to 30W.Automatically determines and supplies the exact power to meet the device's needs.Can be mounted on a wall or positioned on a desktop, accommodating most installation scenarios.Plug-and-play design requires no installation or configuration.Features an integrated power supply

The Brainboxes ES-457 2-port RS232 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 to 1000000 baud. It features point-to-point Tx/Rx modes and has DB9 9 pin male connector. This device server features EIA - RS232 standard operating distance and is compatible with Microsoft Windows 10/8/7/Server 2008/Vista/XP/2000 operating system..Drive server provides access to two RS232 serial ports.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, Power consumption: 1.85 W typical, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE, IP-30, TAA, Green compliant, RoHS and WEEE certifications & standards.Interface: Two RS232, Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: EIA - RS232 standard, Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.48 oz..Comes with lifetime warranty

The Logitech PoE Injector with Plug Set (952-000074) is a high-performance Power over Ethernet solution tailored specifically for powering Logitech Tap meeting room touch controllers. By delivering both data and power over a single Ethernet cable, it allows for cleaner installations, eliminating the need for separate power adapters and reducing cable clutter. The injector complies with IEEE 802.3af/at standards, providing up to 30W of reliable power, and includes an international plug set for global deployment. Whether used in corporate boardrooms or collaborative spaces, this PoE injector ensures seamless and professional AV integration. It's also compliant with energy and environmental standards like RoHS and WEEE, making it a dependable and eco-conscious choice for modern workplaces..Simplified Cabling for Logitech Tap: Delivers both power and data over a single Cat5e cable, eliminating the need for a separate power outlet at the table.Extended Reach: Supports cable runs up to 131.23 ft (40 meters), allowing flexible placement of Logitech Tap in larger or uniquely configured meeting rooms.Clean and Professional Installations: Reduces cable clutter with precise cable lengths and compatibility with all Logitech Tap mounts, including Table, Riser, and Wall Mounts.Plug-and-Play Integration: Designed specifically for Logitech Tap, ensuring seamless connectivity and reliable performance in any meeting room setup.Included 10m Cable: Comes with a 32.81 ft (10 meters) Cat5e cable, or use your own for custom-length installations.Universal Power Supply: Includes a 100–240V auto-switching power supply with international adapters for global deployment.Ideal for Modern Conference Rooms: Perfect for Microsoft Teams Rooms, Zoom Rooms, and Google Meet setups requiring clean, efficient cable management

This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity.The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware.Contains PCI Express, SATA power (15 pin), and RJ-45 (PoE+).Supports the IEEE 802.3af and IEEE 802.3at (Type 1 and Type 2) standards for Power Sourcing Equipment (PSE) and can deliver up to 48V DC and 25.5W of power to compliant Powered Devices (PD).Leverages Intel vPro technology for remote management and troubleshooting capabilities. Improve bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and the streaming of online content.Access up to 2.5GBASE-T speeds using Cat5e (or better) cabling, to maximize existing networks and equipment.Connect Power over Ethernet enabled IP cameras, phones, or Wireless Access Points.Provide power to remote powered devices that require a PoE power source.Add multi-gigabit connectivity to a desktop or server.Compatible with Windows 10, 11; Windows Server 2019, 2022; Linux 5.8.x and up.Box contains: network card, low-profile bracket, quick start guide.2-year manufacturer limited warranty.This card supports the following advanced features: PXE Boot, WoL, VLAN tagging, 9 K jumbo frame, full-duplex, and Intel vPro technology..This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.

TRENDnet's Gigabit PoE++ Injector, model TPE-119GI, is an 802.3bt PoE injector that combines electrical power with a gigabit network connection to produce a high-powered 95W PoE++ network signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE, PoE+, and PoE++ devices. Connect the Gigabit PoE++ injector to a non-PoE switch, and then run an Ethernet cable with data + power to network a PoE device up to 100 meters (328 ft.) away. Network PoE devices such as wireless access points, IP cameras, VoIP phone systems, IPTV decoders, access controls, and more with this 802.3btbt PoE injector. DEVICE INTERFACE: 1 x Gigabit Data in port; 1 x Gigabit PoE++ out port POE++: The Gigabit PoE++ Injector converts a non-PoE gigabit port to a PoE++ Gigabit port and supplies PoE (up to 15.4W), PoE+ (up to 30W), or PoE++ (up to 95W) to a device. INSTALLATION FLEXIBILITY: Wall-mount design of the PoE++ injector and a sturdy metal enclosure accommodates most installations scenarios POE TECHNOLOGY: With PoE technology, users only need one set of cables to deliver both data and power simultaneously which reduces equipment cost by delivering data and power over existing network cables. POE DISTANCE: The injector provides a PoE++ network connection up to 100m (328 ft.) AUTO SENSING TECHNOLOGY: Auto-sensing technology on the 802.3bt PoE injector conveniently delivers the correct wattage needed to power your PoE, PoE+, and PoE++ devices. EASY INSTALLATION: No configuration needed, simply connect a PoE network device to the Power over Ethernet injector TRENDnet 3 YEAR PROTECTION: This Gigabit PoE++ Injector comes with 3 Year TRENDnet manufacturer protection NDAA / TAA compliant (U.S. and Canada only). More from the Manufacturer.Supplies PoE (15.4W), PoE+ (30W), or PoE++ (95W.Integrated power supply.Network a PoE device up to 100m (328 ft.) away.Save on installation and equipment costs

The UDS1100 Device Server with PoE enables users to connect, manage and control just about any piece of equipment with a serial port from virtually anywhere over Ethernet or the Internet..Ports: 1 x RJ 45, 1 x DB 25.Dimensions: 3 1/2"(H) x 2 1/2"(W) x 0.9"(D).Compatibility: PC.Form factor: Wall mountable, Processor speed: 48 MHz.Ethernet technology: Fast ethernet, Data link protocol: Ethernet, fast ethernet, RS 232, RS 422, RS 485.Interface/ports: 1 x serial - RS 232/422/485 - 25 pin D Sub (DB 25), 1 x network / power - Ethernet 10base T/100Base TX - RJ 45.Connectivity technology: Wired.Status indicators: Link activity, power, status.Standard memory: 256 KB, Memory technology: SRAM, Flash Memory installed (Max): 2 MB.Operating temperature: 41 - 122 deg F.Input voltage: 30 VDC.Software selectable RS232, RS422 or RS485, flow control, DHCP support, ARP support, half duplex mode, full duplex mode.Network protocols: TCP/IP, UDP/IP, ICMP/IP, Remote management protocol: SNMP, Telnet, HTTP.Certificate and standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3af, UL, CSA, FCC, CE, TUV, C Tick, C Tick.Weight: 7.05 oz..Warranty: 2 years limited.Latronix Device Server with PoE - Simplicity and Speed

TRENDnet's 2-Port Gigabit PoE++ Extender, model TPE-BE200, takes a single PoE++ (60W) connection and extends it an additional 100m (328 ft.) for up to two PoE+ (30W) devices. This dual/multi-port extender auto-detects a PoE (15.4W), PoE+ (30W), or PoE++ (60W) input, and extends it for a total distance of up to 200m (656 ft.) from the PoE source. Daisy chain up to four extenders for a total PoE network extension of up to 500m (1,640 ft.). This gigabit PoE++ range extender features a single PoE++ (60W) input port and two PoE+ (30W) output ports. DEVICE INTERFACE: 1 x Gigabit PoE++ In Port; 2 x Gigabit PoE Out Ports; LED Indicators POE++ POWER: The Gigabit PoE++ Extender extends a PoE++ connection up to 10m (328 ft.) to PoE (15.4W), PoE+ (30W), and PoE++ (60W) devices. No external power required. Powered via Power over Ethernet. GIGABIT PORTS: The 2-Port PoE Extender features one gigabit PoE++ input port and two gigabit PoE+ output ports that extend a single PoE++ connection an additional 100m (328 ft.) to two PoE+ devices. DAISY CHAIN: Daisy chain up to 4 units for a total PoE network extension of up to 500m (1640 ft.). EXTENSION DISTANCES: Extends a PoE/PoE+/PoE++ network connection an additional 100m (328 ft.) for a total distance of up to 200m (656 ft.) from the PoE source COMPATIBLE DEVICES: The extender supports PoE (15.4W), PoE+ (30W), and PoE++ (60W) devices TRENDnet PROTECTION: The TPE-BE200 2-Port Gigabit PoE++ Extender comes with 3 year TRENDnet ManufacturerProtection. More from the Manufacturer.Daisy chain up to 4 units for a total PoE network extension of up to 500m (1,640 ft.).Use a single PoE++ (60W) connection to extend PoE+ (30W) for up to two devices.Supports PoE (15.4W), PoE+ (30W), and PoE++ (60W) devices.Convenient wall mountable design

Extend Gigabit Ethernet and PoE beyond the 100 meter limit to reach distant access points, phones, and cameras. Each repeater passes data and power-no external supply required-and can be daisy-chained up to five units for links up to 600 meters. Plug and play autosensing ports and Auto MDI X simplify deployment..Passes power and data without external supply.Autosensing Gigabit ports ease setup.Works with IEEE 802.3af and 802.3at PoE plus

Add 10G Ethernet capability to your enterprise, server, or desktop computer Quickly adds one 10G Ethernet port, through an available PCI Express 3.0 x4 slot, to server or desktop systems NBASE-TTM technology allows 2.5Gbps and 5Gbps Ethernet speeds for cable lengths up to 100 meters, over existing CAT5e/6 cable infrastructure plus Power over Ethernet (PoE) over CAT cable Intel X550 chipset supports reliable and advanced network connectivity with Intel virtualization technology Compliant with IEEE 802.3, 802.3an, 802.1Q with full duplex and Wake-on-Lan support Feature innovative power management including 802.3az EEE (Energy Efficient Ethernet) and DMA Coalescing to increase efficiency and reduce power consumption Fits both standard and low-profile system chassis with the included brackets Extra large heat-sink guards against heat build-up for reliable performance and long life.NBASE-TTM technology allows 2.5Gbps and 5Gbps Ethernet speeds for cable lengths up to 100 meters, over existing CAT5e/6 cable infrastructure plus Power over Ethernet (PoE) over CAT cable.Intel X550 chipset supports reliable and advanced network connectivity with Intel virtualization technology.Compliant with IEEE 802.3, 802.3an, 802.1Q with full duplex and Wake-on-Lan support.Feature innovative power management including 802.3az EEE (Energy Efficient Ethernet) and DMA Coalescing to increase efficiency and reduce power consumption

Power up your network with the StarTech 4-Port Gigabit PoE+ Midspan Injector. Designed to deliver both data and power over a single Ethernet cable, this compact hub supports up to four PoE-enabled devices with speeds up to 1000Mbps and power output of up to 30.8W per port. Ideal for IP cameras, access points, and VoIP phones, it features auto-sensing technology for seamless compatibility and plug-and-play setup—no software required. Wall-mountable and TAA compliant, it’s perfect for professional installations where space and power access are limited. Integrated circuit protection ensures safe operation, while LED indicators provide real-time status at a glance..Functions as a PoE+ injector.Supports Gigabit Ethernet with data transfer rates up to 2 Gbps..Operates over wired Ethernet.Connects using standard RJ-45 Ethernet ports for seamless integration..Features four LAN ports for powering and networking multiple PoE devices..Designed for desktop or wall-mount installation in compact environments..2-year manufacturer warranty for parts and labor.

AXIS 5025-281 PoE Extender.Security accessories type: Network extender.Compatibility: M11 series, M30 series, M31 series, M31-VE series, M32 series, P33 (indoor models).Dimensions: 4.1"(H) x 1.6"(W) x 0.9"(D).Connectors: Shielded RJ-45, EIA 568A and 568B.Enclosure type: External.Cabling type: 10Base-T, 100Base-TX.Weight: 1.59 oz.Data transfer rate: 100 MBps.1 Year limited warranty.AXIS® PoE Extender is designed for M11 series, M30 series, M31 series, M31-VE series and M32 series.

The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.Auto sensing technology delivers 30 Watts to 802.3at PoE+ devices or 15 Watts to 802.3af PoE devices. No need to buy a PoE switch-use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations..Dimensions: 1.4"(H) x 5.2"(W) x 2.5"(D).Features network distances of up-to 328'.Input ports: 1 x RJ-45 10/100/1000Base-T.Output ports: 1 x RJ-45 10/100/1000Base-T.Input voltage: 110/220 VAC, 50/60 Hz.Input current: 650 mA.Output power: 30 W maximum.Form factor: External.Full duplex gigabit speeds, converts a non-PoE ethernet port-to a PoE+ or PoE port.Integrated power supply.Includes gigabit PoE+ injector, quick installation guide, power cord.Certifications and standards: CE, FCC, IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, Green compliance certificate/authority: RoHS, WEEE.Weight: 5.70 oz..Warranty: 3 years limited.TRENDnet® Full duplex Ethernet speed gigabit PoE+ injector features network distances of up-to 328'.

The Brainboxes ES-420 1-port RS422/485 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 - 1000000 baud. It features full duplex, half-duplex autogating Tx/Rx modes and has DB9 9 pin male connector. This device server offers maximum operating distance of 4000' and is compatible with Communicate with Microsoft Windows 10/8/7/Vista/XP 2000 operating systems..Drive server provides access to one RS422/485 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, Power consumption: 1.74 W, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE TAA, IP-30, Green, RoHS and WEEE certifications & standards.Interface: One RS422/485, Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: 4000', Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty

This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports. This mid/end-span injector is capable of transmitting network data and power up to 328ft (100m) for remote installations. The PoE, PoE+, PoE++ compatibility and selectable power output ensure seamless compatibility with Powered Devices (PD). The TAA-compliant injector includes a Universal Power Adapter for different regions. Multiport PoE Injector supports the IEEE 802.3af, 802.3at, and 802.3bt (Type 3 and Type 4) standards for Power Sourcing Equipment (PSE), delivering up to 52V DC and 95Watts. This flexibility eliminates the need for a separate power source for remote networked devices such as IP cameras, access control devices, remote kiosks (POSs), wireless access points, PoE lighting, and digital signage..4-PORT MULTI-GIGABIT POE INJECTOR: Multiport PoE++ injector supports up to 5Gbps (NBASE-T) w/auto-negotiation; TAA-compliant Power Sourcing Equipment (PSE) delivers power & data over Ethernet cable; Supports PoE/PoE+/PoE++ 95W max; Level-4 ESD protection.SELECTABLE POWER OUTPUT: DIP switch allows user to select the power output between auto-negotiation up to 90W, 95W PoH+, or forced legacy 60W (UPoE); 802.3af/802.3at/802.3bt power modes available on all ports; Total power budget of 160 Watts.MULTI-GIGABIT: Supports 5/2.5/1Gbps & 100/10Mbps; 5GBASE-T/2.5GBASE-T compatible; Provide data & power to Powered Devices (PDs) up to 328ft (100m) w/Cat 5e/6/6a cabling; Supports WoL/PXE/9K Jumbo frames; Unmanaged PoE injector streamlines setup & deployment.RUGGED ENCLOSURE: Durable full-metal housing ensures durability; Mount the PoE injector to a wall or a DIN rail with the included bracket; LAN transformers isolate the input/output data, and a power circuit prevents interference between ports.STATUS LEDS: Top-facing color-coded diagnostic LEDs indicate the current PoE mode per Ethernet port and current PoE power budget of the injector for quick at-a-glance status of the system.This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports.

This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports. This mid/end-span injector is capable of transmitting network data and power up to 328ft (100m) for remote installations. The PoE, PoE+, PoE++ compatibility and selectable power output ensure seamless compatibility with Powered Devices (PD). The TAA-compliant injector includes a Universal Power Adapter for different regions. Multiport PoE Injector supports the IEEE 802.3af, 802.3at, and 802.3bt (Type 3 and Type 4) standards for Power Sourcing Equipment (PSE), delivering up to 52V DC and 95Watts. This flexibility eliminates the need for a separate power source for remote networked devices such as IP cameras, access control devices, remote kiosks (POSs), wireless access points, PoE lighting, and digital signage..4-PORT MULTI-GIGABIT POE INJECTOR: Multiport PoE++ injector supports up to 5Gbps (NBASE-T) w/auto-negotiation; TAA-compliant Power Sourcing Equipment (PSE) delivers power & data over Ethernet cable; Supports PoE/PoE+/PoE++ 95W max; Level-4 ESD protection.SELECTABLE POWER OUTPUT: DIP switch allows user to select the power output between auto-negotiation up to 90W, 95W PoH+, or forced legacy 60W (UPoE); 802.3af/802.3at/802.3bt power modes available on all ports; Total power budget of 160 Watts.MULTI-GIGABIT: Supports 5/2.5/1Gbps & 100/10Mbps; 5GBASE-T/2.5GBASE-T compatible; Provide data & power to Powered Devices (PDs) up to 328ft (100m) w/Cat 5e/6/6a cabling; Supports WoL/PXE/9K Jumbo frames; Unmanaged PoE injector streamlines setup & deployment.RUGGED ENCLOSURE: Durable full-metal housing ensures durability; Mount the PoE injector to a wall or a DIN rail with the included bracket; LAN transformers isolate the input/output data, and a power circuit prevents interference between ports.STATUS LEDS: Top-facing color-coded diagnostic LEDs indicate the current PoE mode per Ethernet port and current PoE power budget of the injector for quick at-a-glance status of the system.This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports.

Enjoy the super fast Gigabit Ethernet connection by inserting this Gigabit Ethernet card into your computer.Enjoy superfast data transfer of up to 250 MB/s with PCI Express card, between the network card and motherboards.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.Dual-port Gigabit Ethernet, PoE support

Overcome the 100 m Ethernet limit by inserting an OUTREACH Max every extra 100 m of Cat5/6 cable. No configuration or local power is required, and full‑rate throughput is maintained for IP cameras, APs, and PoE devices..Inline extender adds 100 m per unit for Cat5/6 runs..Passes PoE to power remote network devices..No setup or local power for quick deployments..Maintains full‑rate Ethernet throughput.

Industrial Gigabit PoE Splitter - 90W High Speed Power over Ethernet PoE+++ Splitter - 12-48V DC Splitter 802.3bt - LAN/RJ45 Ultra PoE to DC Adapter - -40C to +75C (POESLT1G48V).90W POE IEEE802.3bt: Supports IEEE 802.3af (PoE / Type 1), IEEE 802.3at (PoE+ / Type 2), IEEE 802.3bt (PoE++ / Type 3); power out configured w/ DIP switch for 12/16/24/48V DC (1.5A) via terminal block.HIGH POWER GIGABIT PoE SPLITTER: Power non-PoE devices using network infrastructure where power isn't available | Splits PoE connection (max 90W) into RJ45 data & DC power (terminal block).ROBUST DESIGN: Industrial Power over Ethernet Splitter w/MTBF of 600,000+ hrs. @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing | Hardened operating temp of -40C to 75C.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This PoE Splitter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: High Speed 1 Gbps | 1 x RJ45 PoE In | 1 x RJ45 Data Out | 12V-48VDC 1.5A power output | 4 pin Terminal Block Power Out | 10/100/1000 Mbps Auto Negotiation | DIN or Wall Mountable.Rugged PoE Splitter | 12-48V DC | IP-30 Aluminum Housing | 1.5A Power Output

The Ubiquiti® POE-24-24W-G 24 V gigabit PoE injector offers surge protection, clamping protection, maximum surge discharge and peak pulse current for PoE devices protection. It supports Gigabit LAN PoE interface..Gigabit PoE injector offers earth grounding and surge protection to help protect against electrostatic discharge events.Dimensions: 2.24"H x 3.47"W x 1.3"D.Power: 24 VDC/1 A, 90 - 260 VAC at 47 - 63 Hz (input), Current: 0.6 A at 120 VAC, 0.4 A at 240 VAC (input).Frequency: 65 kHz (switching).Interface/ports: Gigabit LAN PoE.Efficiency: 80+ percent, Output ripple: 1 percent, Line regulation: + 1 percent, Load regulation: + 3 percent.4-Pair powering: Pins 1, 2, 4, 5 (+) and pins 7, 8, 3, 6 (-), AC connector: IEC-320 C6, Data In/PoE: RJ-45 shielded socket.Surge discharge: 1500 A power, Shunt capacitance: <5 pf data, Response time: <1 nS.Meets IEC 60950-1:2005+A1, UL60950-1, EN55022:2010, EN55024:2010, FCC Class B certifications and standards

Industrial Gigabit PoE Injector - High Speed/High Power 90W - 802.3bt PoE++ 48V-56VDC DIN Rail UPoE/Ultra Power Over Ethernet Injector Adapter -40C to +75C Rugged (POEINJ1G90W).90W POWER BUDGET: Provides up to 90W of auto-negotiated power output for Type 3 and Type 4 PoE/Ultra/UPoE applications like tilt and pan cameras and high power IEEE 802.11ax wireless access points.ROBUST DESIGN: Industrial Power over Ethernet Injector w/MTBF of 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing | Hardened operating temp of -40C to 75C.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This PoE Injector is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: 1 Gbps | 48V-56VDC Power Input | IEEE 802.3af | IEEE 802.3at | IEEE 802.3bt 90W max | PoH (HDBase-T) | uPoE | 10/100/1000 Mbps Auto Negotiation | DIN/Wall Mountable | Redundant Power Input.WIDE STANDARD COMPATIBILITY: High speed Industrial Gigabit PoE Injector compatible w/ IEEE 802.3bt (PoE++) & previous 90W proprietary POE standards including PoH (HDBase-T), Cisco uPoE, Bosch & AXIS.Rugged PoE Injector | 90 Watts Max | IP-30 Aluminum Housing | 18V-56V DC

Extend PoE+ power and Gigabit data another 100 m (328 ft.) without an external supply. Daisy‑chain extenders to reach longer distances, forwarding up to 30 W to IEEE 802.3af/at devices..Adds 100 m to a PoE+ link with Gigabit throughput..No additional power supply required (PoE‑powered)..Supports up to 30 W for cameras, APs, and phones..Cascade units to span large installations.