PoE Ethernet Adapters

Axis Communications® 5026-401 T8640 POE+ Ethernet over coax adapter enables IP communication over existing Coax video cabling. Converts an analog system to digital and offers standard PoE and centrally sourced power without any new cables. Comes with diagnostics LEDs for power and link status in both base and device unit..Suitable for installation of network cameras.Measures 4.1" x 2.2" x 0.9".Provides BNC 75 ohm coaxial connection and has shielded ethernet RJ-45, EIA 568A or 568B for convenience.Has 100Base-TX full duplex Ethernet cable and offers 100 + 100 Mbps symmetrical to full range coaxial cable data rate.100Base-TX Full duplex coaxial type Ethernet cable delivers 100+100Mbps symmetrical to full range data rate.PoE AXIS T8642 enabled to detect devices up to 25.5 W power.Has network indicators, power indicators, plug-and-play installation, wall/rack/din rail mounting and detects PoE automatically.Operates at 14 - 122 deg F temperature and has storage temperature of -40 to 165 deg F.Meets IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE, FCC part 15 and Class B with FTP cabling standards.Certifications and standards: IEEE 802.3af, IEEE 802.3at, RoHS, WEEE, CE, FCC part 15, Class B with FTP cabling, EN 55022 Class B, (Emissions, PoE powered), EN 55022 Class A (Emissions, DC powered), EN 55024 (Immunity).Weight: 0.3 lbs..Axis Communications® T8640 POE+ Ethernet over coax adapter is perfect for installation of network cameras. Full network connection is delivered and features durable construction.

Ubiquiti™ Networks™ 48 VDC 24 W Power over Ethernet injector with gigabit LAN port features RJ-45 input/output port to deliver high-speed internet. Injector comes with USA power cord and features an LED display to indicate status of power..Frequency: 47 - 63 Hz, 65 kHz switching.Dimensions: 1.3"(H) x 3.61"(W) x 2.36"(D).Interfaces/ports: Input ports: 1 x RJ-45 ethernet, output ports: 1 x RJ-45 ethernet.Power: Output power: 24 W, input voltage: 110 - 220 VAC, 48 VDC output, input current: 600 mA at 110 VAC, 400 mA at 220 VAC, 500 mA output.Efficiency: 80+%, output ripple: 1%, regulation: + or - 1% line, + or - 3% load, peak pulse current: 36A (10/1000microsecond) data.Operating temperature: -10 - +60 deg C, Operating humidity: 5 - 90% non condensing.Surge protection: Difference and common mode, clamping protection: 11 V data, 60 V power.Shunt capacitance: <5 pf data, response time: <1 nS, 2-pair powering: Pins 4, 5 (+) and pins 7, 8 (-).Compatibility: Rocket-Ti, UAP-Pro.Certifications and standards: IEC 60950-1:2005+A1, UL60950-1, EN55022:2010, EN55024:2010, FCC Class B.Weight: 5.59 oz..Ubiquiti™ Networks™ 48 VDC 24 W Power over Ethernet injector with gigabit LAN port provides earth grounding/surge protection and also helps to protect against ESD attacks.

The Ubiquiti Networks POE-50-60W PoE Adapter is a high-performance power solution designed to deliver reliable 50V, 60W output to a wide range of Ubiquiti PoE-enabled devices, including airFiber, airMAX, airVision, UniFi, and mFi series. Engineered for seamless integration into professional network environments, this adapter features a built-in Gigabit LAN port for high-speed data transmission and supports a wide input voltage range of 90–260V AC at 50/60 Hz, making it ideal for global deployments. Advanced surge protection, clamping, peak pulse current handling, and ESD shielding ensure your network stays protected against electrical threats. The compact and lightweight design (4.0 x 2.4 x 1.3 inches, 6.8 oz) allows for easy installation in tight spaces, while earth grounding support adds an extra layer of operational safety. With an operating temperature range of 32°F to 104°F (0°C to 40°C) and 35–95% humidity tolerance, the POE-50-60W is built to perform in demanding conditions. Backed by a 1-year limited warranty, this PoE adapter is the perfect choice for powering Ubiquiti devices with efficiency, safety, and speed..Powerful 50V, 60W Output: Delivers reliable Power over Ethernet (PoE) for a wide range of Ubiquiti devices including airFiber, airMAX, airVision, UniFi, and mFi series.Integrated Gigabit LAN Port: Ensures high-speed data transmission with full Gigabit Ethernet support.Advanced Surge & ESD Protection: Built-in safeguards against surge, clamping, peak pulse current, and electrostatic discharge for enhanced device safety.Wide Input Voltage Range: Operates on 90–260V AC, 50/60 Hz, making it suitable for global deployments.Earth Grounding Support: Provides additional protection and stability in professional network environments.Compact & Lightweight Design: Measures just 4.0 x 2.4 x 1.3 inches and weighs 6.8 oz for easy integration into any setup.Reliable Operating Conditions: Functions in temperatures from 32°F to 104°F (0°C to 40°C) and 35–95% humidity.IEEE 802.3af Backward Compatibility: Supports legacy PoE devices while delivering robust performance.Ideal for Ubiquiti Ecosystems: Optimized for seamless use with Ubiquiti’s networking hardware—ensuring compatibility and performance.1-Year Limited Warranty: Backed by Ubiquiti’s manufacturer warranty for peace of mind.Ubiquiti™ Networks™ 50 VDC 60 W Power over Ethernet injector provides earth grounding/surge protection and also helps to protect against ESD attacks.

This Ethernet switch features auto-negotiation, auto-sensing for devices, auto-uplink (auto MDI/MDI-X), and store-and-forward technology for seamless and efficient network performance..8 x 10/100Base-TX.Interfaces/ports: 8 x network (RJ-45).96KB buffer.Filtering address table: 1K MAC entries/device.Power: 48 VDC, 1.45 A, power consumption: 69 W (max), PoE budget: Up to 15.4 W max/port.Dimensions: 1.1"(H) x 6.7"(W) x 3.9"(D).Media type supported: Cat 5 twisted-pair.Switching capacity: 1.6 Gbps.LED indicators:/unit: power/PoE Max,/port: Activity/link & speed, PoE port: power/status.Network technology: 10/100Base-TX Fast Ethernet.Layer supported: 2, Form factor: Wall mountable.Includes 8-port Ethernet switch with PoE, power adapter, CD-ROM with production description.Certification & standards: FCC Class B, CE, RoHS.Weight: 1 lbs..Warranty: Lifetime limited.Warranty: Lifetime limited.D-Link® 8-Port fast Ethernet PoE unmanaged desktop switch is perfect for use in virtually any room or office. Plug-and-play device requires no configuration.

This StarTech POEEXT1GAT Gigabit PoE+ extender features compact, wall-mountable and rugged metal housing that offers better performance in harsh environments. The extender is equipped with plug-and-play technology, so you won't need to install software or run programs to get it up and running. It is perfect for Wi-Fi access points, IP phones, surveillance cameras and kiosks where a power connection is not available. This extender automatically detects your connected PD to prevent damage if incorrectly installed..Network extender is perfect for Wi-Fi® access points, IP phones, surveillance cameras, and kiosks where a power connection is not available.Dimensions: 1"H x 2.7"W x 3.7"D, Cable length: 328'.Black with steel for durability and corrosion resistance.2-x RJ-45 female interfaces/ports.PoE IN, LNK/ACT, PoE OUT LED indicators offer easy monitoring.Power supply: 52 - 56 VDC (input), Power consumption: 3.2 W max, Power source: PoE-powered.Environmental conditions: 0 - 50 deg C (operating), -10 - 85 deg C (storage), Humidity - 5 - 95% RH.Compatible networks: 10/100/1000 Mbps, Flow control: Half-duplex back-pressure, IEEE 802.3x pause frame for full duplex.Data transfer rate: 2 Gbps (full duplex).Surge protection: EN61000-4-2 (ESD) - 2 kV, EN61000-4-5 (surge) - 2 kV, Switching architecture: Store-and-forward.Auto MDIX, auto-negotiation, full duplex support for better performance.Includes gigabit power over Ethernet extender, instruction manual.Meets IEEE 802.3af PoE, IEEE 802.3at PoE+, EEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T certification and standards.Weight: 6.6 oz..Comes with 2 years warranty.The StarTech Gigabit PoE+ extender extends your PoE PDs over longer distances by daisy-chaining four extenders up to 500m.

SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media converter that enables enterprises to provide power to network devices over the existing CAT5 data connection. Transition Networks' AC powered PoE media converters combine data received over a fiber optic link with-48 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. The PoE converters are Power Sourcing Equipment (PSE) and are fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af: 2003 standard. The converters also include a PD signature sensing and power monitoring features per the IEEE 802.3af standard. Other features include Over-Current Protection, Under-Current Detection and Fault Protection Input. This feature enhanced model offers the ability to enable/disable many of the features as well as force port capabilities. In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power output on the UTP port for 2 seconds to allow remote device to re-initialize. (Also known as Powered Device Reset. )The PoE converter is fully compatible with devices that comply with the IEEE802.3af standard. The PoE converter is capable of inserting power on data pairs or spare pair of the MDI..Total Number of Ports: 2.Network (RJ-45): Yes.DVI: No

Overcome PoE limitations with the next-generation Ubiquiti Networks FiberPoE, model F-POE-G2. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection. With the FiberPoE Gen 2, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs..Media converter is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device.Dimensions: 7.73"H x 3.68"W x 1.28"D.Comes in white and made of polycarbonate.Provides Gigabit bidirectional data transport between twisted-pair Ethernet cable and fiber optic cable; injects DC power to the Ethernet cable for passive PoE.Featuring a built-in high-current Gas Discharge Tube (GDT) for the DC terminal block and PoE port, the media converter delivers enhanced surge protection.The added GDT support effectively protects against lightning and other power surges.Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI).Data integrity is sustained in runs beyond 100m, the limit of Ethernet over a twisted-pair cable.Supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.PoE output: PoE RJ45 port, two-pair (4, 5+; 7, 8-) (24VDC) or four-pair (24VDC or 50VDC) PoE.DC output: 2-wire (24VDC or 50VDC) terminal block.Input DC voltage: 16V to 57V.LED: white - power on, blue - connected, blue (flashing) - activity.Operating temperature: -40 degrees Fahrenheit to 140 degrees Fahrenheit.Operating humidity 10% to 95% noncondensing.ESD/EMP protection: +/- 24kV contact/air for Ethernet.Meets or exceeds CE, FCC, IC standards

Power Up Your Network with TP-Link POE160S PoE+ Injector Enhance your network's efficiency and reach with the TP-Link POE160S PoE+ Injector. Designed to comply with IEEE 802.3af/at standards, this powerful injector delivers up to 30 W of power, making it perfect for powering devices like access points, IP cameras, and IP phones. With its plug-and-play installation, you can easily expand your network without the need for additional power lines or outlets. Key Features: Gigabit Ports: Enjoy faster data transmission with two Gigabit Ethernet ports, ensuring seamless connectivity for your devices. High Power Output: Supplies up to 30 W of power, automatically adjusting to meet the needs of your connected devices. Cost-Effective Solution: Reduce infrastructure costs by transmitting data and power simultaneously over a single Ethernet cable. Versatile Installation: The wall-mounting and desktop design accommodate various installation scenarios, providing flexibility for your network setup. Plug & Play: Easy installation with no configuration required, allowing you to quickly and effortlessly expand your network. Reliable Performance: Complies with IEEE 802.3af/at standards, ensuring compatibility with a wide range of PoE devices. Whether you're setting up a new network or upgrading an existing one, the TP-Link POE160S PoE+ Injector is the perfect solution for delivering power and data efficiently and reliably. Trust TP-Link to power your network with ease and efficiency..This PoE Injector is ideal for expanding your network to areas without power lines or outlets, supporting devices like access points, IP cameras, and IP phones..Compatible with all IEEE 802.3af/at PoE compliant PDs (Powered Devices) or PoE Splitters, such as TP-Link's POE10R (TL-POE10R), or other equivalent products..The injector measures 4.9 x 2.3 x 1.4 inches, making it compact and easy to install in various settings..The device comes in black and is made of durable materials to ensure long-lasting performance..The TP-Link POE160S PoE+ Injector is sold individually, providing one unit per purchase.

The EnGenius power-over-Ethernet adapter is suitable for connecting APs, IP cameras, VoIP phones and more. This adapter has an optimal port design that ensures easy, precise mounting or positioning. It has 2 Gigabit Ethernet ports that help in connecting to a switch and PoE-enabled device. The built-in surge protection assures maximum security to your valuable network equipment from electrostatic discharge and lightning strikes. The included hardware provides easy placement of your adapter on walls, structured wiring enclosures and ceilings. It extends the power to the unwired areas up to 328'..Meets IEC 60950-1:2005+A1, UL60950-1, ENS55022:2010, EN55024:2010, FCC part 15 class B, FCC and CE standards and certifications.Physical interface: (1) Gigabit data port, (1) Gigabit data & power output port, (1) IEC-320 C6 AC connector.Power on green LED.Wall mounting and includes anchors and screws.Electrical rating: 100 to 240 VAC input voltage, 0.8 A Max for 100 VAC Input Current, 47-63 Hz AC input frequency, 32.8 W maximum output power.Power lines: Pin4, 5: 54 V, Pin7, 8: Return.Includes EPA5006GP and power cord.Comes with 1 year warranty.Single port gigabit power-over-ethernet adapter will disconnect, short-circuit and surge protection ensures reliable, secure connections.

The StarTech POEINJ4G black PoE+ injector helps to deliver power and data to four power over Ethernet devices using this wall-mountable PoE+ midspan hub. It supports 10/100/1000 Mbps networks/devices as well as auto-negotiation and auto-MDIX. Features flexible setup and comes with a desktop-sized or wall-mountable metal housing for durability. PoE+ injector automatically detects the powered device to offer the appropriate level of power output..PoE injector is perfect for powering a Wireless Access Point (WAP) in a business environment.Dimensions: 3.7"H x 2.8" W x 1"D.Compatible with IP cameras, IP phones and wireless access points.Comes in black color.Easily connect, power, and operate up to four gigabit PoE-powered devices (PD).Delivers full power to each port - up to 30.8 W (802.3at) or 15.4 W (802.3af) to each connected device.Flexible setup, with a desktop-sized, or wall mountable metal housing for user convenience.Plug and-play setup for reliable operation.Automatically detects the powered device to provide the appropriate level of power output.Circuit protection prevents power interference between each port.Support for 10/100/1000 Mbps networks and devices, as well as Auto-Negotiation and auto MDIX.Enable remote installation of touchscreens, information kiosks, and phones in locations where a power connection is not available.Has 8 - RJ-45 female connectors, 4 ports and 1 power/4 PoE in-use LED indicators.Power supply: 100 -240VAC (input), 52VDC (output ), Current: 2-1A (input), 2.31A (output), Power consumption: 120W max, Power output: 52VDC at 30.8W.Temperature: -10 - 70 deg C (storage), 0 - 50 deg C (operating), Humidity: 5 - 95% RH (non-condensing).Includes 1 x 4-port gigabit PoE+ Injector, 1 x universal power adapter, 3 x power cords (NA/UK/EU), instruction manual.Meets RoHS compliant, FC, CE certification and standards.Weight: 7.2 oz.Comes with 2 years warranty.The StarTech black PoE+ injector is suitable for almost all PoE device classes, including wireless access points, as well as IP phones and cameras.

Tenda PoE Injector 48V, IEEE802.3at Gigabit PoE Injector up to 30W, Compatible with IEEE 802.3af, RJ45 Port, Passive PoE 10 / 100Mbps, Distance Up to 100 Meters.High Speed Gigabit Ports Experience lightning-fast wired speeds with 1× Gigabit Ethernet Input Port plus 1× Gigabit Ethernet Output port..802.3at/af PoE Compliant PoE30G-AT supplies power and data with one single ethernet cable to 802.3at/af PoE devices and expands network to areas with no power lines or outlets..Auto Detect Power With Auto Detect technology, PoE30G-AT determines and delivers the exact power supply to your devices with up to 30W power output..Long Range Transmission Deliver Power up to 100 meters (328ft.), perfect for IP cameras or access point deployment in large area..Convert Non-PoE to PoE With no need to replace your existing non-PoE switch/device, you can easily have PoE enabled with the use of PoE30G-AT..Plug and Play Installation no configuration is needed, simply connect a PoE network device, accommodates most installations scenarios..Tenda's product comes with an industry-leading 5-year warranty, accompanied by complimentary lifetime dedicated technical support. Please feel free to contact us via phone or email.

The Brainboxes ES-446 1-port RS232 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 to 1000000 baud. It features point-to-point Tx/Rx modes and has DB9 9 pin male connector. This device server features EIA - RS232 standard operating distance and is compatible with Microsoft Windows 10/8/7/Server 2008/Vista/XP/2000 operating system..Drive server provides access to one RS232 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, power consumption: 1.5 W typical, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE, IP-30, TAA, Green compliance, RoHS and WEEE certifications & standards.Interface: One RS232 serial port, one Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: EIA - RS232 standard, Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty.Black

Introducing the TP-Link Omada PoE++ Injector, the perfect solution for expanding your network to areas without power lines or outlets. This versatile injector fully complies with IEEE 802.3af/at/bt (type 3) standards, delivering up to 60W of power to your PoE devices. Ideal for powering PTZ IP cameras, access points, and LEDs, it ensures reliable performance and seamless connectivity. Designed for convenience, the Omada PoE++ Injector features two Gigabit Ethernet ports, allowing for both data and power transmission over a single Ethernet cable. Its plug-and-play installation makes setup a breeze, while the durable metal casing ensures long-lasting use. Whether mounted on a wall or placed on a desktop, this injector fits perfectly into any environment. With automatic power adjustment, the injector supplies the exact power needed by your devices, preventing overloading and ensuring efficient energy use. Certified by CE, FCC, and RoHS, it meets international standards for safety and performance. Upgrade your network with the TP-Link Omada PoE++ Injector and enjoy the benefits of extended connectivity and reliable power delivery. Perfect for both residential and commercial applications, this injector is your go-to choice for enhancing your network infrastructure..The TP-Link Omada PoE++ Injector is designed to provide power and data transmission to PoE devices via an Ethernet cable. It is ideal for expanding your network to areas without power lines or outlets, making it perfect for PTZ IP cameras, access points, and LEDs..This injector is compatible with devices that comply with IEEE 802.3af/at/bt (type 3) standards, including PTZ IP cameras, access points, and LEDs, ensuring seamless integration into your network..The injector measures 6.1 inches in width, 2.8 inches in depth, and 1.7 inches in height, making it compact and easy to install in various environments..The injector comes in a sleek black color and features a durable metal casing, ensuring long-lasting performance and protection for your network setup..The TP-Link Omada PoE++ Injector is sold individually, providing a single unit per purchase.

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance, a switch is normally used as a repeater, or optical fiber may be used. To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable, and forward the rest to the camera. Dependent on midspan and camera type, the connection in total can be between 200-400 meters (656-1312 ft.)..Input Ports: 1 10/100Base-T.Output Ports: 1 10/100Base-T.Weight (Approximate): 1.59 oz

Adds PoE Devices to Your LAN Without a PoE Switch: Now you can add a surveillance camera, wireless access point, VoIP phone or other PoE (Power over Ethernet) device to your home or office network, even if your network switch doesn't support PoE. Instead of making an expensive upgrade to a PoE switch, you can use this single-port PoE+ injector to send 30 watts of power, as well as Gigabit Ethernet data, through your existing Cat5e/6/6a cabling. Saves You Time and Money on Unnecessary Equipment Updates: This compact PoE plus injector delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables. That means, in addition to not buying a new PoE network switch, you also don't need to install new AC power lines and electrical outlets. This cost-effective midspan injector sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. Expand Your Wireless Network Up to 328 ft.: The NPOE-30W-1G delivers both power and data to any IEEE 802.3at (PoE+) or IEEE 802.3af (PoE) device up to 100 meters (328 feet) away. This allows you to install a device in a building lobby, on a ceiling, inside a warehouse or anywhere else an AC power outlet is unavailable. The PoE+ injector supports full-duplex 2 Gbps communication for sending and receiving data simultaneously. It also protects your device against short circuits, overloads and power surges. Simple Plug-and-Play Installation Has Your Device Connected in Minutes: No configuration or software is required to add the NPOE-30W-1G to your LAN. Just connect your switch or network jack to the shielded RJ45 Data port and your PoE device to the shielded RJ45 Power + Data port using existing Cat5e/6/6a cable. Connect the unit's C14 inlet to a NEMA 5-15R outlet using the included power cord. LEDs indicate the unit is receiving power and is ready to transmit data. Designed for Installation Almost Anywhere: Mounting holes are featured for installing the midspan injector on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation. 3-Year Warranty and Environmentally Responsible Design: The NPOE-30W-1G comes with a 3-year warranty. It's manufactured in compliance with strict RoHS specifications, reflecting Tripp Lite's commitment to environmental responsibility..PoE+ injector uses existing Cat5e/6/6a cable to supply power to a PoE device connected to a non-PoE switch..Saves money by delivering 30W of power + data up to 328 ft. through existing cabling.Extends power + data to any PoE or PoE+ device installed where no AC outlet is available.Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps.Quick and easy plug-and-play installation with no configuration necessary.Compact, hand-sized plastic housing ready for mounting on any smooth surface

The EDS4100 is the first external device server to deliver an enterprise-grade, programmable device computing and networking platform for integrating edge equipment into the enterprise network..Ports: 4 x DB 9, 1 x RJ 45.Dimensions: 3.8"(H) x 17.7"(W) x 12.7"(D).Compatibility: PC.Form factor: Wall mountable, Processors installed: 1 x 266 MHz.Ethernet technology: Fast ethernet, Data link protocol: Ethernet, fast ethernet, RS 232, RS 422, RS 485.Interface/ports: 2 x serial - RS 232 - 9 pin D Sub (DB 9), 2 x serial - RS 232/422/485 - 9 pin D Sub (DB 9), 1 x network - Ethernet 10base T/100Base TX - RJ 45.Connectivity technology: Wired.Status indicators: Link activity, power, test mode.OS compatibility: Microsoft windows 98/ME/NT/2000/XP.RAM Installed ( Max ): 32 MB, Flash Memory Installed (Max): 8 MB.Operating temperature: 32 - 131 deg F, Humidity: 10 - 90%.Encryption algorithm: Triple DES, ARCFOUR, AES, SSL 3.0, Authentication method: Secure shell v.2 (SSH2).Co mmunication mode: Half duplex, full duplex, IEEE 802.3af (when PoE is populated), 128 bit encryption, DHCP support, BOOTP support, ARP support.Network protocols: TCP/IP, UDP/IP, ICMP/IP, Remote management protocol: SNMP 2, Telnet, HTTP.Includes: EDS4100 4 port device server with PoE, universal power supply and regional adapters, deviceInstaller configuration software, com port redirector software and related utilities.Certificate and standards: UL, TUV GS, VCCI, C Tick, cUL, EN 61000 3 2, IEC 61000 4 11, IEC 61000 4 2, IEC 61000 4 3, IEC 61000 4 4, IEC 61000 4 5, IEC 61000 4 6, IEC 61000 4 8, EN 61000 3 3, EN55024, EN55022 Class A, CISPR 22, FCC Part 15, RoHS.Weight: 1.90 lbs..Warranty: 2 years limited.Lantronix EDS Series PoE Device Server - Faster Ethernet Connection

Power Your Devices Anywhere with TP-Link POE10R Omada PoE Splitter Expand your network effortlessly with the TP-Link POE10R Omada PoE Splitter. Designed to comply with IEEE 802.3af standards, this versatile splitter delivers selectable power outputs of 12V, 9V, or 5V, making it perfect for powering devices like access points, IP cameras, and IP phones in locations without power outlets. Key Features: Gigabit Speed Support: Enjoy high-speed data transmission with two Gigabit Ethernet ports, ensuring efficient and reliable connectivity for your devices. Selectable Power Output: Choose from 12V, 9V, or 5V power outputs to meet the specific needs of your connected devices, providing flexibility and convenience. Plug-and-Play: With no configuration required, the splitter is easy to install and use, making network expansion a breeze. Wide Compatibility: Fully compatible with IEEE 802.3af compliant PSEs, such as TP-Link's TL-SF1008P or POE150S, and other equivalent products. Compact Design: Measuring just 3.2 x 2.1 x 0.9 inches, the splitter is compact and easy to integrate into various network setups. Reliable Performance: Delivers power up to 100 meters, ensuring stable and continuous operation for your network devices. Whether you're setting up a new network or expanding an existing one, the TP-Link POE10R Omada PoE Splitter offers a reliable and efficient solution for powering your devices. Trust TP-Link to keep your network running smoothly and efficiently..This PoE splitter is designed for power use, converting PoE to DC power for devices like access points, IP cameras, and IP phones, making it a versatile and essential tool for network expansion..The splitter features two 10/100/1000 Mbps RJ45 ports with auto-negotiation and auto MDI/MDIX, ensuring seamless and high-speed data transmission..Provides selectable power outputs of 12VDC 1A, 9VDC 1A, or 5VDC 2A through a dedicated power output port, catering to the power requirements of various devices..Supports network media up to 100 meters using UTP category 3, 4, 5, 5e, or 6 cables, ensuring flexibility in device placement..The splitter features male to female connectors, providing a reliable connection for power and data transmission..Complies with IEEE 802.3af standards and is certified by FCC, CE, and RoHS, ensuring safety, reliability, and compatibility with a wide range of PoE devices.

PoE+ Industrial Fiber to Ethernet Media Converter 60W - SFP to RJ45 - Singlemode/Multimode Fiber to Copper Gigabit Ethernet - Compact Size - IP-30/ -40 to +75C (IMC1GSFP60W).EXTEND, CONVERT, POWER: Fiber to Ethernet media converter with PoE extends & converts fiber to RJ-45 copper; Provides up to 60W of PSE power to PoE/PoE+/PoE++ PD devices like cameras and sensors.FLEXIBLE POWER: Can be hardwired using terminal block (48-56VDC) power or powered using a standard Type-N barrel wall adapter (not included).OPEN SFP SLOT: Any MSA compliant SFP can be used for the incoming multimode or singlemode fiber connection; easy deployment across applications or fiber cable types.ROBUST DESIGN: Industrial Gigabit Media Converter w/MTBF 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing | Hardened operating temp -40C to 75C.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This media converter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.Industrial PoE Media Converter | 10/100/1000 Mbps | 60 Watts | Open SFP | DIN Rail Mountable

The Brainboxes ES-457 2-port RS232 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 to 1000000 baud. It features point-to-point Tx/Rx modes and has DB9 9 pin male connector. This device server features EIA - RS232 standard operating distance and is compatible with Microsoft Windows 10/8/7/Server 2008/Vista/XP/2000 operating system..Drive server provides access to two RS232 serial ports.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, Power consumption: 1.85 W typical, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE, IP-30, TAA, Green compliant, RoHS and WEEE certifications & standards.Interface: Two RS232, Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: EIA - RS232 standard, Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.48 oz..Comes with lifetime warranty

The Logitech PoE Injector with Plug Set (952-000074) is a high-performance Power over Ethernet solution tailored specifically for powering Logitech Tap meeting room touch controllers. By delivering both data and power over a single Ethernet cable, it allows for cleaner installations, eliminating the need for separate power adapters and reducing cable clutter. The injector complies with IEEE 802.3af/at standards, providing up to 30W of reliable power, and includes an international plug set for global deployment. Whether used in corporate boardrooms or collaborative spaces, this PoE injector ensures seamless and professional AV integration. It's also compliant with energy and environmental standards like RoHS and WEEE, making it a dependable and eco-conscious choice for modern workplaces..Simplified Cabling for Logitech Tap: Delivers both power and data over a single Cat5e cable, eliminating the need for a separate power outlet at the table.Extended Reach: Supports cable runs up to 131.23 ft (40 meters), allowing flexible placement of Logitech Tap in larger or uniquely configured meeting rooms.Clean and Professional Installations: Reduces cable clutter with precise cable lengths and compatibility with all Logitech Tap mounts, including Table, Riser, and Wall Mounts.Plug-and-Play Integration: Designed specifically for Logitech Tap, ensuring seamless connectivity and reliable performance in any meeting room setup.Included 10m Cable: Comes with a 32.81 ft (10 meters) Cat5e cable, or use your own for custom-length installations.Universal Power Supply: Includes a 100–240V auto-switching power supply with international adapters for global deployment.Ideal for Modern Conference Rooms: Perfect for Microsoft Teams Rooms, Zoom Rooms, and Google Meet setups requiring clean, efficient cable management

This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity.The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware.Contains PCI Express, SATA power (15 pin), and RJ-45 (PoE+).Supports the IEEE 802.3af and IEEE 802.3at (Type 1 and Type 2) standards for Power Sourcing Equipment (PSE) and can deliver up to 48V DC and 25.5W of power to compliant Powered Devices (PD).Leverages Intel vPro technology for remote management and troubleshooting capabilities. Improve bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and the streaming of online content.Access up to 2.5GBASE-T speeds using Cat5e (or better) cabling, to maximize existing networks and equipment.Connect Power over Ethernet enabled IP cameras, phones, or Wireless Access Points.Provide power to remote powered devices that require a PoE power source.Add multi-gigabit connectivity to a desktop or server.Compatible with Windows 10, 11; Windows Server 2019, 2022; Linux 5.8.x and up.Box contains: network card, low-profile bracket, quick start guide.2-year manufacturer limited warranty.This card supports the following advanced features: PXE Boot, WoL, VLAN tagging, 9 K jumbo frame, full-duplex, and Intel vPro technology..This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.

The Brainboxes ES-420 1-port RS422/485 PoE Ethernet to serial device server with fast Ethernet technology is rail-mountable and features user-friendly interface that is simple to use and delivers powerful operation. It comes with serial port tunneling that allows serial cable replacement over any distance and supports data rate from 110 - 1000000 baud. It features full duplex, half-duplex autogating Tx/Rx modes and has DB9 9 pin male connector. This device server offers maximum operating distance of 4000' and is compatible with Communicate with Microsoft Windows 10/8/7/Vista/XP 2000 operating systems..Drive server provides access to one RS422/485 serial port.Dimensions: 1.1"H x 4"W x 3.9"D, 96.3 mm x 101 mm x 25 mm (with ears), 91.6 mm x 77 mm x25 mm (without ears).Connectivity: 10/100Base-TX Fast Ethernet.Requires Microsoft Windows 10, 8 - 32 bit & 64 bit Editions, Windows Server 2012, 7 - 32 bit & 64 bit Editions and Windows Server 2008 32/64 bit.Power supply: PW-800 optional global power supply, Power consumption: 1.74 W, Power input: Power over Ethernet OR 5 - 30V DC input.Meets CE TAA, IP-30, Green, RoHS and WEEE certifications & standards.Interface: One RS422/485, Network (RJ-45) and PoE (RJ-45) port.Connector: DB9 connector - 9 pin male, Tx FIFO size: 256, Rx FIFO size: 32, Integrated connector.Operating distance: 4000', Max baud rate: 1 MegaBaud, Data bits: 5 ,6 ,7 , 8, Parity: Odd, even, none, mark or space, Stop bits: 1 or 2.Power over Ethernet: IEEE 802.3af, PCB layers: 4, Mounting accessory: DIN-rail mounting kit - MK-048, Network protocols: ICMP, IP, TCP and UDP.Media type supported: Twisted pair, User friendly interface, simple to use, powerful in operation.Temperature: 0 - 60 deg C (operating), Humidity: 5 to 95 percent (non-condensing).Contains server, quick start guide, installation CD including manual, Microsoft signed drivers & utilities.Weight: 4.27 oz..Comes with lifetime warranty

The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.Auto sensing technology delivers 30 Watts to 802.3at PoE+ devices or 15 Watts to 802.3af PoE devices. No need to buy a PoE switch-use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations..Dimensions: 1.4"(H) x 5.2"(W) x 2.5"(D).Features network distances of up-to 328'.Input ports: 1 x RJ-45 10/100/1000Base-T.Output ports: 1 x RJ-45 10/100/1000Base-T.Input voltage: 110/220 VAC, 50/60 Hz.Input current: 650 mA.Output power: 30 W maximum.Form factor: External.Full duplex gigabit speeds, converts a non-PoE ethernet port-to a PoE+ or PoE port.Integrated power supply.Includes gigabit PoE+ injector, quick installation guide, power cord.Certifications and standards: CE, FCC, IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, Green compliance certificate/authority: RoHS, WEEE.Weight: 5.70 oz..Warranty: 3 years limited.TRENDnet® Full duplex Ethernet speed gigabit PoE+ injector features network distances of up-to 328'.

This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports. This mid/end-span injector is capable of transmitting network data and power up to 328ft (100m) for remote installations. The PoE, PoE+, PoE++ compatibility and selectable power output ensure seamless compatibility with Powered Devices (PD). The TAA-compliant injector includes a Universal Power Adapter for different regions. Multiport PoE Injector supports the IEEE 802.3af, 802.3at, and 802.3bt (Type 3 and Type 4) standards for Power Sourcing Equipment (PSE), delivering up to 52V DC and 95Watts. This flexibility eliminates the need for a separate power source for remote networked devices such as IP cameras, access control devices, remote kiosks (POSs), wireless access points, PoE lighting, and digital signage..4-PORT MULTI-GIGABIT POE INJECTOR: Multiport PoE++ injector supports up to 5Gbps (NBASE-T) w/auto-negotiation; TAA-compliant Power Sourcing Equipment (PSE) delivers power & data over Ethernet cable; Supports PoE/PoE+/PoE++ 95W max; Level-4 ESD protection.SELECTABLE POWER OUTPUT: DIP switch allows user to select the power output between auto-negotiation up to 90W, 95W PoH+, or forced legacy 60W (UPoE); 802.3af/802.3at/802.3bt power modes available on all ports; Total power budget of 160 Watts.MULTI-GIGABIT: Supports 5/2.5/1Gbps & 100/10Mbps; 5GBASE-T/2.5GBASE-T compatible; Provide data & power to Powered Devices (PDs) up to 328ft (100m) w/Cat 5e/6/6a cabling; Supports WoL/PXE/9K Jumbo frames; Unmanaged PoE injector streamlines setup & deployment.RUGGED ENCLOSURE: Durable full-metal housing ensures durability; Mount the PoE injector to a wall or a DIN rail with the included bracket; LAN transformers isolate the input/output data, and a power circuit prevents interference between ports.STATUS LEDS: Top-facing color-coded diagnostic LEDs indicate the current PoE mode per Ethernet port and current PoE power budget of the injector for quick at-a-glance status of the system.This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports.

This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports. This mid/end-span injector is capable of transmitting network data and power up to 328ft (100m) for remote installations. The PoE, PoE+, PoE++ compatibility and selectable power output ensure seamless compatibility with Powered Devices (PD). The TAA-compliant injector includes a Universal Power Adapter for different regions. Multiport PoE Injector supports the IEEE 802.3af, 802.3at, and 802.3bt (Type 3 and Type 4) standards for Power Sourcing Equipment (PSE), delivering up to 52V DC and 95Watts. This flexibility eliminates the need for a separate power source for remote networked devices such as IP cameras, access control devices, remote kiosks (POSs), wireless access points, PoE lighting, and digital signage..4-PORT MULTI-GIGABIT POE INJECTOR: Multiport PoE++ injector supports up to 5Gbps (NBASE-T) w/auto-negotiation; TAA-compliant Power Sourcing Equipment (PSE) delivers power & data over Ethernet cable; Supports PoE/PoE+/PoE++ 95W max; Level-4 ESD protection.SELECTABLE POWER OUTPUT: DIP switch allows user to select the power output between auto-negotiation up to 90W, 95W PoH+, or forced legacy 60W (UPoE); 802.3af/802.3at/802.3bt power modes available on all ports; Total power budget of 160 Watts.MULTI-GIGABIT: Supports 5/2.5/1Gbps & 100/10Mbps; 5GBASE-T/2.5GBASE-T compatible; Provide data & power to Powered Devices (PDs) up to 328ft (100m) w/Cat 5e/6/6a cabling; Supports WoL/PXE/9K Jumbo frames; Unmanaged PoE injector streamlines setup & deployment.RUGGED ENCLOSURE: Durable full-metal housing ensures durability; Mount the PoE injector to a wall or a DIN rail with the included bracket; LAN transformers isolate the input/output data, and a power circuit prevents interference between ports.STATUS LEDS: Top-facing color-coded diagnostic LEDs indicate the current PoE mode per Ethernet port and current PoE power budget of the injector for quick at-a-glance status of the system.This 4-Port Multi-Gigabit PoE++ Injector Hub serves as Power Sourcing Equipment (PSE) and enables multigigabit speeds of 5Gbps, 2.5Gbps, 1Gbps, 100Mbps, and 10Mbps across four Ethernet ports.

The Ubiquiti Instant INS-3AF-I-G indoor Gigabit PoE converter for 802.3af switches, transforms any Ubiquiti PoE devices into a fully compliant 802.3af compatible product. It works with 10/100/1000 Mbps ports to deliver high throughput speeds over a wired connection. This instant 802.3af adapter supports longer cable runs for more efficient power delivery. The device provides an additional +/-15 kV of Ethernet isolation for built-in protection or surge protection. It is compatible with airMAX and UniFi devices..Indoor Gigabit PoE converter transforms passive PoE devices into 802.3af-compliant products.Dimensions: 3.76"D x 1.19"Dia. (with RJ45 cable).Compatibility: 802.3af switches for remote control power applications.Protection type: Surge protection.Interfaces/ports: 1 x Gigabit RJ45 port (PoE in), 1 x Gigabit RJ45 port (PoE out).Network and communication: 10/100/1000Base-T.Power: 48 VDC input, 24 V, 0.5 A output.Form factor: External.Enables longer cable runs due to a more efficient power delivery.Provides an additional +/- 15 kV of Ethernet isolation to lessen the risk of ESD or surge damage to connected devices.Weight: 1.76 oz.

Industrial Gigabit PoE Splitter - 90W High Speed Power over Ethernet PoE+++ Splitter - 12-48V DC Splitter 802.3bt - LAN/RJ45 Ultra PoE to DC Adapter - -40C to +75C (POESLT1G48V).90W POE IEEE802.3bt: Supports IEEE 802.3af (PoE / Type 1), IEEE 802.3at (PoE+ / Type 2), IEEE 802.3bt (PoE++ / Type 3); power out configured w/ DIP switch for 12/16/24/48V DC (1.5A) via terminal block.HIGH POWER GIGABIT PoE SPLITTER: Power non-PoE devices using network infrastructure where power isn't available | Splits PoE connection (max 90W) into RJ45 data & DC power (terminal block).ROBUST DESIGN: Industrial Power over Ethernet Splitter w/MTBF of 600,000+ hrs. @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing | Hardened operating temp of -40C to 75C.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This PoE Splitter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: High Speed 1 Gbps | 1 x RJ45 PoE In | 1 x RJ45 Data Out | 12V-48VDC 1.5A power output | 4 pin Terminal Block Power Out | 10/100/1000 Mbps Auto Negotiation | DIN or Wall Mountable.Rugged PoE Splitter | 12-48V DC | IP-30 Aluminum Housing | 1.5A Power Output

Industrial Gigabit PoE Injector - High Speed/High Power 90W - 802.3bt PoE++ 48V-56VDC DIN Rail UPoE/Ultra Power Over Ethernet Injector Adapter -40C to +75C Rugged (POEINJ1G90W).90W POWER BUDGET: Provides up to 90W of auto-negotiated power output for Type 3 and Type 4 PoE/Ultra/UPoE applications like tilt and pan cameras and high power IEEE 802.11ax wireless access points.ROBUST DESIGN: Industrial Power over Ethernet Injector w/MTBF of 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing | Hardened operating temp of -40C to 75C.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This PoE Injector is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: 1 Gbps | 48V-56VDC Power Input | IEEE 802.3af | IEEE 802.3at | IEEE 802.3bt 90W max | PoH (HDBase-T) | uPoE | 10/100/1000 Mbps Auto Negotiation | DIN/Wall Mountable | Redundant Power Input.WIDE STANDARD COMPATIBILITY: High speed Industrial Gigabit PoE Injector compatible w/ IEEE 802.3bt (PoE++) & previous 90W proprietary POE standards including PoH (HDBase-T), Cisco uPoE, Bosch & AXIS.Rugged PoE Injector | 90 Watts Max | IP-30 Aluminum Housing | 18V-56V DC

The Ubiquiti Instant INS-3AF-O-G outdoor Gigabit PoE converter for 802.3af switches, transforms any Ubiquiti PoE devices into a fully compliant 802.3af compatible product. It works with 10/100/1000 Mbps ports to deliver high throughput speeds over a wired connection. This instant 802.3af adapter supports longer cable runs for more efficient power delivery. The device provides an additional +/-15 kV of Ethernet isolation for built-in protection or surge protection. It is compatible with airMAX and UniFi devices..Outdoor Gigabit PoE converter transforms passive PoE devices into 802.3af-compliant products.Dimensions: 14.4"D x 1.19"Dia. (with RJ45 cable).Compatibility: 802.3af switches for remote control power applications.Protection type: Surge protection.Interfaces/ports: 1 x Gigabit RJ45 port (PoE in), 1 x Gigabit RJ45 cable (PoE out).Network and communication: 10/100/1000Base-T.Power: 48 VDC input, 24 V, 0.5 A output.Form factor: External.Enables longer cable runs due to a more efficient power delivery.Provides an additional +/- 15 kV of Ethernet isolation to lessen the risk of ESD or surge damage to connected devices.Weight: 3.17 oz.

This media converter by Tripp Lite converts a single-mode or multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SFP with fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks, and access control devices..Customizable media converter extends power and data to a PoE+ device via fiber cable.Dimensions: 0.98"H x 3.74"W x 2.76"D.Network compatibility: 10/100/1000 Mbps Gigabit Ethernet network.Features a compact black metal housing.PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device.Supports auto-sensing of network speed and other advanced functions, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration.Supports both full- and half-duplex operation.Customizable SFP port supports both 1G single- and multimode transceivers.RJ45 jack supports auto MDI/MDI-X to bridge various network devices.Six LEDs indicate the converter's power, PoE, Ethernet network, and fiber link statuses at a glance.Completely plug-and-play with no additional software required for connection.The included power supply connects to a convenient AC outlet with no computer or other signal source needed.Works in tandem with Tripp Lite N785-Series non-PoE converters (sold separately).Pack includes: media converter, external power supply with 3.6' cord and NEMA 5-15P plug (input: 100-240V, 50/60 Hz, 1.5A; output: 48V 1.25A), and owner's manual.Meets or exceeds FCC and RoHS standards.2-year manufacturer limited warranty

The Ubiquiti EdgePoint PoE injector provides a variety of features to help protect your PoE devices: surge protection, clamping protection, maximum surge discharge, peak pulse current, AC cable with earth ground..PoE injector with a variety of features to help protect your PoE devices.Compatible with airFiber, airMAX, EdgeMAX, mFi, UniFi AP, UniFi Protect, airVision, UniFi LED, UFiber.Dimensions: 1.34"H x 4.84"W x 2.56"D.Comes in white.Offers 80W of power to an Ethernet cable for PoE devices.Contains 1 x Gigabit Ethernet RJ45 LAN and 1 x PoE ports.Output voltage: 54VDC/1.5A.Rated voltage: 100-240VAC, 50/60Hz.Surge protection: difference and common Mode.Meets or exceeds the CE, FCC, IC and UL standards

TRENDnet TPE-113GI Gigabit Power over Ethernet Injector.Full Duplex Gigabit speeds supported.Use non-PoE switches to network PoE devices at distances of up to 100 meters.Save on installation and equipment costs.2.75 x 1.8 x 1 in..Create an integrated PoE and non-PoE Gigabit network.3 year mfg. limited warranty.IEEE 802.3ab Gigabit and 802.3af PoE compliant.Gigabit Power over Ethernet (PoE) Injector delivers a PoE signal for distances of up to 100 meters (328 ft.).1 x 10/100/1000 Mbps Auto-MDIX Data In port.1 x 10/100/1000 Mbps PoE Auto-MDIX Data Out port.Power port.Power LED indicator.Supplies power up to 15.4 Watts.Easily install a PoE device where a power outlet is not available.Reduce installation and network equipment costs.Safeguards network devices with short circuit protection.Plug and Play in remote location.Light weight and compact size.Wall mounting points.TRENDnet® 15.4 W Injector merges electrical power with a Gigabit network data signal to product a Gigabit power over Ethernet signal. With plug and play installation.

Lantronix Single port device server provides a portable, extremely flexible and highly affordable network connectivity solution. Server features serial data rate of up to 921.6 Kbps..Network Certificates and standards: 10Base-T/100Base-Tx.LAN Ports: Ethernet 10Base-T/100Base-Tx.Wired router security: 128-bit AES, 192-bit AES, 256-bit AES encryption.Connectivity technology: Wired.Protocol: Ethernet, fast ethernet, RS-232, RS-422, RS-485 data link, TCP/IP, UDP/IP, ICMP/IP, BOOTP, DHCP network/transport, SNMP, Telnet, HTTP, TFTP remote management.Form factor: External.Status indicators: Power, status, link/activity, serial.Power consumption: 2 W.OS required: Microsoft Windows 2008/2003 server, Windows Vista/7/xP/ (32/64 bits).Data rate: 300 bps - 921.6 kbps, 10 Mbps, 100 Mbps.Features: Flow control, auto-sensing per device, DHCP support, 15 KV electrostatic discharge protection.Operating tempreature: 70 - -40 deg C.Processors: 1 x installed, 256 KB SRAM, 1MB flash memory installed.Certifications and Standards: VCCI, C-Tick, EN 61000-3-2, EN 61000-3-3, EN55024, CISPR 22, EN55022 Class B, FCC Part 15 B, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, IEEE 802.3af.Lantronix Single port device server is a sleek and compact serial-to- Ethernet device server providing quick and easy Ethernet connectivity to virtually any device or machine with a serial interface.

The Ubiquiti Networks PoE Injector is designed for the company's airFiber, airMAX, EdgeMAX, mFi, UniFi AP, and UniFi Protect / airVision products. This 24 VDC, 7.2W, 0.3A adapter provides protection against surge, clamping, maximum surge discharge, and peak pulse current..Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including: airFiber®, airMAX®, EdgeMAX®, mFi®, UniFi® AP, UniFi Video / airVision®.Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber's local network to the WISP network..120 V AC, 230 V AC Input - 24 V DC, 300 mA Output.Gigabit Ethernet Input Port(s) - Gigabit Ethernet Output Port(s).Ubiquiti Networks PoE Injector (24 VDC, 7.2W)

The Axis Communications 5900-334 high PoE midspan with data connectivity, provides an easy and fast solution for powering network video products without the need to install power outlets and electrical cabling. This midspan conforms to the IEEE 802.3at for powering devices with high power requirements on a network. It provides 60 W power and is perfect for use with all Axis network video products featuring built-in PoE support. Midspan enables the network video devices to receive data and power over the same Ethernet cable and makes it easier to install in areas where power cabling and outlets are unavailable..PoE injector.Dimension: 1.5" x 2.4" x 5.9"; Weight: 0.7 lbs..Connectors: shielded RJ45, EIA 568A and 568B power connector C13.Data rate: 10/100/1000 Mbps.Power selector: 15 W or 30 W; Input voltage: 100 to 240 VAC; Frequency: 50-60 Hz.Local LED management display.Maximum output power: 60 W.Network cables: shielded category 5 (or higher).Port interfaces are located on the front panel, Port LED: power indicator and data connectivity.Mounting wall, shelf or DIN rail.Operating conditions: -10 to 45 deg C (14 to 113 deg F).RoHS, REACH, CB, WEEE, CE, EN 55022 Class B, EN 61000 3-2, EN 61000 3-3, EN 55024, FCC Part 15 Subpart B Class B, VCCI Class B.Optional accessories: AXIS midspan DIN clip a mains cable angle C13-open 0.5 m.PoE injector with 10/100/1000 Mbps data rate.

Startech.com Black power over Ethernet injector offers data connectivity over standard ethernet cable for longer distances. Injector can be used to power PoE-enabled devices where there is no electrical outlet..1000Mbps/IEEE 802.3af PoE/IEEE 802.3at PoE+/IEEE 802.3 10Base-T/IEEE 802.3u100Base-TX/IEEE 802.3 1000Base-T.2 x RJ-45 10/100/1000Base-T LAN port.Perfect solution for applications where an electrical outlet may not be available.Color: Black, enclosure: Plastic.Interfaces/ports: 1 x input port.Power supply: Input voltage: 100 - 240 VDC, output voltage: 48 VDC, input current: 0.75 A, output power: 30 W per port, frequency: 50 -60 Hz.Form factor: Wall mountable.Dimensions: 1"(H) x 2.5"(W) x 2.8"(L).Temperature: 0 - 45 deg C operating, -20 - 85 deg C storage, humidity: 10 - 90%(non-condensing).LED indicators: 1 x device power indicator.Center tip polarity: Positive, Plug type: M.Injector adapter can be used to power PoE-enabled devices such as IP cameras or wireless access points (WAPs).Includes POE+ injector, 4 x mounting screws, universal power adapter, 3 x power cords, instruction manual.Compliance: FCC, CE, RoHS.Weight: 1.8 oz..Warranty: 2 years limited.Startech.com Black power over Ethernet injector connects an individual PoE powered device to a non-PoE LAN switch with its 10/100/1000Mbps port.

Cisco™ AIR-PWRINJ6= 100 Mbps Power PoE Injector for Aironet 1810 Series Access Point.PoE injector is ideal to use with access points.Dimensions: 1.28"H x 2.09"W x 5.5"D.Compatible with Cisco Aironet 2800 series and 3800 series access points.Connectors: RJ-45, EIA 568A and 568B.Data transfer rate: 10/100/100 Mbps.Power: 30 W (user port), 100 - 240 VAC, 0.67 A, 50 - 60 Hz (input), 55 VDC (output).Reliability: MTBF 100000 hrs at 25 deg C.Thermal rating: 20 BTU/Hr at 240 VAC.Temperature: -4 to 104 deg F (operating), 4 to 158 deg F (storage), 90 % relative humidity.Meets China RoHS, IEEE 802.3, WEEE, CE, FCC, VCCI, UL, IEC/EN certifications and standards.Weight: 0.44 lbs..100 Mbps PoE injector provides up to 30 W and is compliant with IEEE 802.3af systems, for use with the Cisco Aironet 2800 series and 3800 series access points.

Supply power to PoE devices on demand. The SRPM24 Power over Ethernet (PoE) midspan is ideal for adding PoE functionality to an existing network. Many network devices such as wireless access points and IP telephones support PoE to power the device instead of connecting to a power outlet. The benefits of using PoE include cost savings from not requiring new power outlets to be installed in remote locations, easier portability of devices, more freedom of where to place devices, and providing a central source for supplying power backup. The SRPM24 is designed to be scalable, so only PoE powered devices need to be connected to the unit and non-PoE devices can connect directly to a switch. For ease of management, the SRPM24 supports both SNMP, CLI command line, and a web-based interface to monitor and manage the device..Input Ports: 24 10/100Base-TX.Output Ports: 24 10/100Base-TX.Input Voltage: 240 V AC

The USW Flex Utility is an outdoor weatherproof enclosure designed for use with the UniFi Switch Flex, USW-Flex. It includes an Ethernet patch cable and a 60W PoE adapter, which provides a maximum PoE budget of 46W. The USW Flex Utility can be easily mounted on a pole, provides clean cable management and screw lock for security..Flex switch adapter kit for streetlight pole applications.Dimensions: 9.8"H x 8.58"W x 2.36"D.Designed for use with the UniFi Switch Flex, USW-Flex (sold separately).Comes in white.Package contains: outdoor weatherproof case, pole holder, and Gigabit PoE power adapter (60W).Easily mounted on a pole, the USW Flex Utility provides clean cable management and a screw lock for security

With a Power-Over-Ethernet (PoE) enabled network switch/router, this Logitech Mevo dongle provides power and wired network connection to your Mevo Start. The Ethernet power adapter also has a USB-C input to power your camera when used with a non-PoE network switch/router..This Ethernet power adapter provides power and wired network connection to your Mevo Start camera.Dimensions: 1.06"H x 1.06"W x 3.13"D.Compatible with Logitech Mevo Start livestreaming camera.Comes in black.Connectivity: USB 2.0 480Mbps; Ethernet 10/100Mbps.Power over Ethernet capabilities: IEEE 802.3-2012 compliant, PD Class 0; Type 1 PD: 37V to 57V operating voltage; maximum input power: 13W.Features a 5V/2A USB Type-C charge port.Power: input (Mevo Start to PoE adapter): 5V/0.5A; output (PoE adapter to Mevo Start): 5V/1.5A.Package contents: Ethernet power adapter and 6.56' angled USB Type-C extension cable

The 4-port Amer Networks 10/100M Desktop PoE Switch provides a seamless network connection, integrating 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities. Cost saving and flexible with PoE power provision, the SD4P4U provides a PoE power injector function which is able to drive 4 IEEE 802.3af compliant powered devices. The switch also provides a simple, cost-effective, and highly reliable network connection for data as well as power..Expand your network capacity with the help of 9 networking ports and transfer your data quickly and easily.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Featuring Fast Ethernet ports to speed up the transfer rate up to 100mb/sec of large files and digital assets across your network.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.The unmanaged switch provides a quick, easy and cost-saving way to add wired networking to your home, office or small business; no intervention needed.Under-table mounting allows you to keep your table tidy and organized.Certifications and standards: CE, FCC