Cat6 Ethernet Adapters

This 2.5GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..One-port 2.5Gbps NBASE-T PCIe network card with Intel I225-V chip.Provides Ethernet speeds up to 2.5Gbps.Has a one RJ-45 port.OS compatibility: Windows 10, 11, Windows Server 2019, 2022, Linux 5.8.x and up (LTS versions only), and VMware ESXi 7.0.Meets or exceeds the RoHS, and WEEE standards.The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities.The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.LAN card features built-in heat sink to keep the controller chip cool for optimal performance.Includes PCIe network card, low-profile bracket, and quick-start guide.2-year manufacturer limited warranty

Connect two Cat 6a cables to extend a network connection, using this Shielded RJ45 Inline Coupler. The female to female Ethernet coupler maintains optimal signal integrity while achieving low insertion loss that exceeds industry standards. Wide Compatibility The Cat6a Coupler supports up to 10Gbps and is compatible with common networking standards including 10/100/1000BASE-T, and advanced protocols such as 2.5GBASE-T/5GBASE-T. The Shielded Inline RJ45 coupler facilitates Power-over-Ethernet (PoE) to power network peripheral devices..Inline Cat-6a Coupler, Ethernet Cable Extension, 10 Gbps.Maximum Data Transfer Rate 10000 Mbps.Number of Ports 2.Compatible with Cat 6/6a and Cat 5/5e cables.Features Shielded, Passive, Corrosion Resistance, Wear Resistant, Plug and Play, PoE, EMI Protection.Product Material ABS, Metal, Contact Material Phosphor Bronze.Limited Warranty Lifetime

Add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x1 (or higher) slot in an IT Administrator workstation or server backplane, using StarTech this 1-Port SFP network controller. The network controller features an Intel I210 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x 1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps.Has one SFP slot.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I210 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slot for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.2-year manufacturer limited warranty

This quad-port 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity across four 2.5G ethernet connections. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..Network controller to add a up to four 2.5GbE ports to a PCI Express (PCIe) 2.0 (or higher) slot in your workstation.Has a four RJ-45 ports.Compatible with Windows, Windows Server, VMware, and Linux systems.Meets or exceeds WEEE standards.Leverages Intel vPro technology for remote management and troubleshooting capabilities.Intel I225-V chipset allows for improved bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and streaming of online content, while reducing network slowdowns.Card ships in a standard-profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

This StarTech five-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer. The USB 3.2 card offers a USB Type-C port (10Gbps), two traditional USB Type-A ports (10Gbps), and a motherboard header (USB 5Gbps). By offering a range of USB port types, you can easily connect a variety of modern and legacy USB devices, both inside and outside your computer. Because the card offers a 10Gbps USB ports, you can save time and avoid the performance bottlenecks that are often associated with other connectivity technologies..This five-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer.PCI Express combo card leverages the performance potential of USB 3.2 Gen 2x1 (10Gbps) to help you work faster.Contains a USB Type-C port (10Gbps), two traditional USB Type-A ports (10Gbps), and a motherboard header (USB 5Gbps).Dimensions: 0.6"H x 4"W x 2.7"D.Lets you bridge the gap between devices that use different connectors; you can simultaneously connect and access USB Type-A and USB Type-C devices, while using only a single PCI Express expansion slot.By adding three types of USB ports in one combo card, you can free up space in your PC case, and eliminate the nuisance of having different cards for different USB devices.With two internal motherboard-style headers, this dynamic USB 3.1 card is perfect for upgrading or building your own computer.Backward compatible with legacy USB 3.0, 2.0 and 1.1 devices, so you can eliminate the added expense and aggravation of purchasing new devices.Great for file backups, video editing, and data recovery, using high-bandwidth USB 3.1 Gen 2 external storage solutions.2-year manufacturer limited warranty

Increase your bandwidth up to 10 Gbps with this StarTech SFP+ card for enhanced data transfer rate using fiber optic cable. Reduce wait times for large file transfers, content sharing, network storage, or any other high bandwidth application. This PCIe network card has an open SFP+ slot that can accept any MSA-compliant module or direct attach cable (DAC). It is compatible with multimode, single-mode, and copper SFP+ modules. This card is natively supported in Windows 11. For security and privacy reasons a fiber network card is the ideal point-to-point network adapter. Eliminate EMI with a fiber connection and cover longer distances with fiber to host..Network controller to add a 10GbE SFP+ module to a PCI Express (PCIe) 3.0 x 4 slot in your workstation.Provides Ethernet speeds up to 10Gbps.Has one SFP+ slot.Compatible with both MSA-compliant and branded 10GB SFP+ modules.Meets or exceeds the RpHS and WEEE standards.An open SFP+ slot to make changes as needed just by swapping the module in use, whether it is fiber, copper, or direct attach cables (DAC).9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network managemen.Full-profile bracket are installed by default, with a low-profile bracket included.2-year manufacturer limited warranty

StarTech.com® 2 Port network card provides redundant connectivity to ensure an uninterrupted network connection and includes RJ-45 interface. Network card is fully compatible with IEEE 802.3/u/ab standards for 10/100/1000 Mbps auto-negotiation..Network adapter interface: PCI express x 4.Network adapter speed: 2000 Mbps, 1000Mbps.Full duplex capability, wake on LAN, auto-uplink, jumbo frames support, teaming support, large send offload, TCP segmentation offload, tagged VLAN, checksum offload support.Network adapter ports: 2 x RJ-45.Media type supported: Twisted pair.Controller processor: Intel I350-AM2.Network technology: 10/100/1000Base-T.System requirements: Windows 8.1 (32/64bit), 8 (32/64), 7 (32/64), vista(32/64), XP(32/64) Windows Server 2012, 2008 R2, 2003(32/64) Linux 2.4.x/ 2.6.x.Cabling technology: 10/100/1000Base-TX Ethernet.Data link protocols: 10MB LAN, 100MB LAN, Gigabit LAN, network / transport protocols: TCP/IP, UDP/IP.Form factor: Plug-in card, chipset ID: Intel - I350-AM2.Connectivity technology: Wired, Port style: Integrated on card, LED indicators: Link/activity.Compatibility: PC.Dimensions: 4.8"(H) x 0.7"(W) x 2.6"(D).Operating temperature: 32 - 122 deg F, storage: -4 - +140 deg F, humidity: 5 - 85% RH.Cable requirements: Available PCI express x4 or higher (x8, x16) slot, supported protocols: IEEE 802.3ad (link aggregation), IEEE 1588 (time sync) / 802.1AS, IEEE 802.1q (VLAN tagging), auto MDIX and full duplex support.Includes 2-port network card, 1 x low profile bracket, 1 x driver CD, 1 x instruction manual.Complaints and standards: FCC, CE, IEEE 802.1q/AS, IEEE 1588, IEEE 802.3/u/ab/ad, PCI express base specification 2.1, RoHS, green compliance.Weight: 2.8 oz..Warranty: 2 years limited.StarTech.com® 2 Port network card is ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs and supports twisted pair media.

This dual-port 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity across two 2.5G ethernet connections. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..Network controller to add a up to two 2.5GbE ports to a PCI Express (PCIe) 2.0 (or higher) slot in your workstation.Has a two RJ-45 ports.Compatible with Windows, Windows Server, VMware, and Linux systems.Meets or exceeds WEEE standards.Leverages Intel vPro technology for remote management and troubleshooting capabilities.Intel I225-V chipset allows for improved bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and streaming of online content, while reducing network slowdowns.Card ships in a standard-profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

Convert and extend a Gigabit Ethernet connection up to 10km over single-mode SC fiber - Provides a cost-effective Ethernet copper to fiber or fiber to copper link - LFP mode on fiber/copper sides - Compact design and wall mountable with easy installation - SC connection (fiber) and RJ45 connection (copper) - Fiber to Ethernet Converter / Fiber to Copper Converter / Fiber optic media converter / Fiber to Ethernet Media Converter / Media converter fiber to Ethernet.Converts and extends a Gigabit fiber (1000 Mbps) network over single-mode fiber on 1000BASE-LX networks.Provides a cost-effective Ethernet to fiber/copper to fiber link.Supports a maximum distance of 10 km over single mode duplex fiber optic cable (SC connection).Compact design and wall mountable.Non-blocking full wire-speed forwarding rate.LED Indicators for simple Ethernet/fiber network link monitoring.1310 nm wavelength.Supports IEEE 802.1q Tag VLAN pass through.Convert and extend a Gigabit Ethernet connection up to 10 km over single-mode SC fiber

The StarTech MCM1110 Gigabit Ethernet fiber media converter has a compact standalone design and wall mounting option to provide easy and worry-free installation. This converter features a durable metal housing that delivers superior performance. Plug-and-play installation helps for a hassle-free setup. Its compact, lightweight design fits nicely into any carrying case that lets you carry wherever you go. This media converter converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances..Gigabit ethernet fiber media converter converts a copper RJ45 Ethernet connection to Gigabit fiber to extend your network over longer distances.Dimensions: 1"H x 2.8"W x 3.7"L.Compatible with networks 10/100/1000 Mbps.Brown steel enclosure for durability.Maximum data transfer rate: 1 Gbps, MTBF: > 50000 hours at 25 deg C, Fiber type: Multi mode, single mode, Fiber operating mode: Full-duplex.Has one RJ-45 female and one SFP slot female connector.LED indicators: 1 x power, 1 x fiber port link/act, 1 x copper port link/act, 1 x 1000 Mbps.Power: 1 A input current, 100 - 240 VAC input voltage, 2 A output current, 5 VDC output voltage, Plug type: N, Power consumption: 5 W max.Form factor: Desktop/wall mountable.Temperature: 32 - 122 deg F operating, 14 - 158 deg F storage, Humidity: 5 - 95% RH (non-condensing).10/100/1000 Mbps compatible RJ45 port supports auto negotiation to bridge different network speeds and devices to a Gigabit fiber network.Compact standalone design and wall mounting option offers easy and convenient installation.Converter offers a powerful networking solution for campuses, businesses, government facilities, stadiums, or other areas requiring network access.Supports Auto MDIX and 9K jumbo frame.Gigabit Open SFP slot to customize the network extension distance to your requirements with virtually any MSA-compliant multi/single mode transceiver.Contains universal power adapter (NA/EU/UK/AU).Meets IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX certification and standards.Weight: 6.5 oz..Comes with 2 years limited warranty.The StarTech Gigabit Ethernet fiber media converter with open SFP slot offers connectivity to users in an isolated area of a large complex or in a separate building.

This StarTech four-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer. The USB 3.2 card offers two USB Type-C port (10Gbps), and two traditional USB Type-A ports (10Gbps). By offering two different USB port types, you can easily connect a variety of USB devices to your desktop computer. Because the card offers 10Gbps USB ports, you can save time and avoid the performance bottlenecks that are often associated with other connectivity technologies..This four-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer.The USB ports offer a data throughput of up to 10Gbps, so you can spend less time waiting for file transfers to complete or for access to your external peripherals.Contains two external USB-C port (USB 10Gbps), two external USB-A ports (USB 10Gbps).Dimensions: 0.9"H x 3.3"W x 4.4"D.Lets you bridge the gap between devices that use different connectors; you can simultaneously connect and access USB Type-A and USB Type-C devices, while using only a single PCI Express expansion slot.By adding two types of USB ports in one combo card, you can free up space in your PC case, and eliminate the nuisance of having different cards for different USB devices.Backward compatible with legacy USB 3.0, 2.0 and 1.1 devices, so you can eliminate the added expense and aggravation of purchasing new devices.USB PCIe expansion card with SATA power supplies supplemental power to the USB ports (when motherboard power is insufficient) providing up to 5V 3A/15W per USB Type-C port & 5V 0.9A/4.5W per USB Type-A port.Installs in full-profile PCIe 3.0 (x4 slot) desktop/server; lower performance with PCI-e 2.0; Windows/Linux/macOS auto driver install (Windows 8 and up).2-year manufacturer limited warranty

Enjoy the super fast Gigabit Ethernet connection by inserting this Gigabit Ethernet card into your computer.Enjoy superfast data transfer of up to 250 MB/s with PCI Express card, between the network card and motherboards.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.Dual-port Gigabit Ethernet, PoE support

The StarTech ST1000SPEXI gigabit Ethernet network card features gigabit Ethernet PCI Express x4 interface card with single RJ-45 port. The RJ-45 port is fully compatible with IEEE 802.3/U/AB standards and offers maximum throughput up to 1000 Mbps auto-negotiation. Advanced features such as jumbo frames, wake-on LAN, auto MDIX and VLAN tagging for optimizing network traffic. Network card is ideal for many business applications requiring upgrades to servers or workstations, adding feature-rich gigabit networking..Gigabit Ethernet network card is suitable for use with PC.Powerline adapter speed: 2000 Mbps.Features 10/100/1000base-T RJ-45 connector.Dimensions: 0.7"H x 2.6"W x 4.7"L.Power consumption: 0.8 W.Meets RoHS, Green compliant certification and standards.PCI Express host interface is for better performance.Form factor: Plug-in card.Supports twisted pair for transmission of both analog and digital signals.Intel I210-AT chipset allows interface card to be compatible with different operating systems.Includes 1-port network card, low profile bracket and instruction manual.Weight: 1.2 oz..Comes with 2 years warranty.The StarTech 2000 Mbps gigabit Ethernet network card is based on Intel I210-AT chipset, that makes it compatible with Windows and Linux operating systems.

The StarTech.com® US1GC30A USB-C to Gigabit network adapter adds a Gigabit Ethernet network connection to your computer through the USB-C port. It features sleek silver finish that compliments your MacBook, laptop or Chromebook with similar color finish. You can increase Gigabit Ethernet capabilities of your laptop or desktop computer without opening the computer or taking up an available expansion slot. It delivers reliable network connections without need of any drivers. It is compatible with Thunderbolt™ 3 ports. Simply plug the adapter into the USB-C port on your laptop and connect to your network. It offers native driver support in Chrome OS™, Mac OS 10.10 and Windows® 8.1..Network adapter adds a Gigabit Ethernet network connection to your computer.Dimensions: 0.7"H x 0.9"W x 2.6"D.Compatible with Windows 7, 8, 8.1, 10,Windows Server 2008 R2, 2012, Mac OS X 10.9 to 10.10, Linux 3.5 to 4.4.x LTS version only.Color: Silver.Maximum data transfer rate: 5 Gbps.Industry standard: IEEE 802.3, 802.3u and 802.3ab.Ports: One USB 3.0 type-C (24-pin) male, one RJ45 female.Network technology: 10/100/1000Base-T.Chipset ID: Realtek RTL8153.Powered directly from the USB port.Thunderbolt 3 port compatible.Up to 9K jumbo frame support.Sleek silver finish looks great with your MacBook and any laptop or Chromebook with similar color finish.Operating temperature: 0 - 70 deg C, Storage temperature: -55 - 125 deg C.WEEE and RoHS Compliant.Weight: 1.2 oz..Comes with 2 years warranty

StarTech.com® PCI Express gigabit ethernet fiber network card has a dual profile design and includes low profile/half height bracket for easy installation. Card is compatible with Windows 8, 8.1, 7, Vista, XP, Mac OS 10.5, Linux 2.6.x and 3.5.0 OS..1x PCI express x1, 1x SFP slot female.4.6"(H) x 0.7"(W) x 5"(D).Windows 8/8.1 (32/64bit)/7 (32/64)/Vista (32/64)/XP (32/64), Windows Server 2012/2008 R2/2003, Mac OS 10.5 and up (Tested up to 10.9), Linux 2.4.x/2.6.x/3.5.0, Microsoft Hyper-V operating systems.Wired.Data transfer rate: 2 Gbps (full-duplex).Form factor: Plug-in card.Buffer size: 48KB.Power consumption: 3.2 W max.Chipset ID: Realtek RTL8168E, Marvell 88E1111B.LED indicators: Link (green), activity (yellow).Temperature: 0 - 45 deg C operating, -20 - 70 deg C storage, Humidity: 5 - 95% RH (non-condensing).Applications: Ideal for secure setups, perfect for remote embedded industrial monitoring systems, and high-speed video surveillance.Compatible with most Gigabit SFP modules.Supports full/half-duplex auto-negotiation, auto-MDI/MDIX.No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.Includes 1 Port PCI Express Gigabit SFP network card, low-profile bracket, driver CD, instruction manual.Certification and standards: CE, FCC, RoHS.Weight: 2 oz..Warranty: 2 years limited.StarTech.com® PCI Express gigabit ethernet fiber network card supports maximum data transfer rate of 2 Gb/s at full duplex mode and has a SFP female slot to ensure flexible network configuration.

This 4-port RJ45 1Gbps OCP 3.0 Network Interface Card (NIC) features an Intel® i350-AM4 Ethernet Controller, enhancing performance and data integrity. The Ethernet card adheres to OCP 3.0 standards and ensures broad compatibility, making it an ideal solution for reliable network connectivity and robust data transfer capabilities. Optimized Network Efficiency Leverage existing Cat5e/Cat6 cabling (or better) up to 100m to maximize existing networks and equipment. The NIC supports variable speed options (10/100/1000 Mbps) with auto-negotiation and 9K jumbo frames to reduce packet overhead, reducing network slowdowns..4-Port RJ45 Gigabit OCP 3.0 Server Network Card, 1 Gbps.Maximum Data Transfer Rate 1Gbps.Number of ports 4.OS Compatibility Windows Server 2012, 2012 R2, 2016, 2019, 2022, 11, 10 VMware ESXi 7.x Linux 2.4.x and up - LTS Versions only.Chipset Model I350-AM4.Media Type Supported Twisted Pair.Form Factor: Plug-in Card.Limited Warranty 2 Year