Power Over Ethernet (PoE) Adapters
80 results
TRENDnet's TI-IG90 is a reliable IP50 rated Industrial Gigabit PoE++ Injector with hardened components rated for extreme and rugged industrial environments. Connect the TI-IG90 industrial PoE injector to a non-PoE gigabit switch, and then run an Ethernet cable up to 100 meters (328 ft.) to network a PoE device. The TI-IG90 industrial PoE injector supplies power to a PoE, PoE+, or PoE++ (up to 95W) device. This industrial PoE injector features dual redundant power inputs with overload current protection to support zero downtime applications. Both DIN-rail and wall mount hardware are included with the industrial PoE injector. DEVICE INTERFACE: 1 x Gigabit port (10Mbps/100Mbps/1Gbps); 1 x Gigabit PoE++ port (10Mbps/100Mbps/1Gbps); 4- pin power terminal block; LED Indicators NDAA + TAA COMPLIANT: With NDAA and TAA compliant network products, you can plan and install the networking solutions that government customers demand today. (U.S. and Canada only) POE++: Supplies power to a PoE (up to 15.4W), PoE+ (up to 30W), or PoE++ (up to 95W) device. CONNECTION DISTANCE: Connect the TI-IG90 industrial PoE injector to a non-PoE gigabit switch, and then run an Ethernet cable up to 100 meters (328 ft.) to network a PoE device. INDUSTRIAL HARDENED DESIGN: Equipped with a rugged IP50 rated housing, designed to withstand a high degree of vibration and shock, and operate within an extreme temperature range of -40° - 75° C (-40° - 167° F). DIN RAIL & WALL MOUNTS: IP50 rated industrial injector includes DIN-Rail mount and wall mount hardware POWER SUPPLY SOLD SEPARATELY: Use this industrial injector with the compatible power supply model TI-S15052 (Sold Separately) FAULT TOLERANCE: The industrial PoE++ injector features 48 - 57V DC power input with overload current protection GROUNDING POINT: The injector features a grounding point to protect equipment from external electrical surges ELECTRO MAGNETIC COMPLIANCE: Complies with industrial EMS certifications ESD (IEC 61000-4-2): Level 3 Contact: 6kV, Air: 8kV; EFT (IEC 61000-4-4): Power 2kV, Signal: 1kV; Surge (IEC 61000-4-5): Power: 2kV, Signal: 6kV More from the Manufacturer.Power supply sold separately (model: TI-S15052).NDAA / TAA compliant.Redundant power inputs with overload current protection.6kV RJ45 Ethernet surge protection
Industrial Gigabit PoE Injector - High Speed/High Power 90W - 802.3bt PoE++ 48V-56VDC DIN Rail UPoE/Ultra Power Over Ethernet Injector Adapter -40C to +75C Rugged (POEINJ1G90W).90W POWER BUDGET: Provides up to 90W of auto-negotiated power output for Type 3 and Type 4 PoE/Ultra/UPoE applications like tilt and pan cameras and high power IEEE 802.11ax wireless access points.ROBUST DESIGN: Industrial Power over Ethernet Injector w/MTBF of 500,000+hrs @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing | Hardened operating temp of -40C to 75C.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This PoE Injector is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: 1 Gbps | 48V-56VDC Power Input | IEEE 802.3af | IEEE 802.3at | IEEE 802.3bt 90W max | PoH (HDBase-T) | uPoE | 10/100/1000 Mbps Auto Negotiation | DIN/Wall Mountable | Redundant Power Input.WIDE STANDARD COMPATIBILITY: High speed Industrial Gigabit PoE Injector compatible w/ IEEE 802.3bt (PoE++) & previous 90W proprietary POE standards including PoH (HDBase-T), Cisco uPoE, Bosch & AXIS.Rugged PoE Injector | 90 Watts Max | IP-30 Aluminum Housing | 18V-56V DC
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.Auto sensing technology delivers 30 Watts to 802.3at PoE+ devices or 15 Watts to 802.3af PoE devices. No need to buy a PoE switch-use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations..Dimensions: 1.4"(H) x 5.2"(W) x 2.5"(D).Features network distances of up-to 328'.Input ports: 1 x RJ-45 10/100/1000Base-T.Output ports: 1 x RJ-45 10/100/1000Base-T.Input voltage: 110/220 VAC, 50/60 Hz.Input current: 650 mA.Output power: 30 W maximum.Form factor: External.Full duplex gigabit speeds, converts a non-PoE ethernet port-to a PoE+ or PoE port.Integrated power supply.Includes gigabit PoE+ injector, quick installation guide, power cord.Certifications and standards: CE, FCC, IEEE 802.3, IEEE 802.3u, IEEE 802.3af, IEEE 802.3at, Green compliance certificate/authority: RoHS, WEEE.Weight: 5.70 oz..Warranty: 3 years limited.TRENDnet® Full duplex Ethernet speed gigabit PoE+ injector features network distances of up-to 328'.
Cisco™ AIR-PWRINJ6= 100 Mbps Power PoE Injector for Aironet 1810 Series Access Point.PoE injector is ideal to use with access points.Dimensions: 1.28"H x 2.09"W x 5.5"D.Compatible with Cisco Aironet 2800 series and 3800 series access points.Connectors: RJ-45, EIA 568A and 568B.Data transfer rate: 10/100/100 Mbps.Power: 30 W (user port), 100 - 240 VAC, 0.67 A, 50 - 60 Hz (input), 55 VDC (output).Reliability: MTBF 100000 hrs at 25 deg C.Thermal rating: 20 BTU/Hr at 240 VAC.Temperature: -4 to 104 deg F (operating), 4 to 158 deg F (storage), 90 % relative humidity.Meets China RoHS, IEEE 802.3, WEEE, CE, FCC, VCCI, UL, IEC/EN certifications and standards.Weight: 0.44 lbs..100 Mbps PoE injector provides up to 30 W and is compliant with IEEE 802.3af systems, for use with the Cisco Aironet 2800 series and 3800 series access points.
Higher Network Speed Boosts Network Performance Zyxel PoE injectors are here to meet the increasing demand for connections to high-speed networking devices such as WiFi 7 and WiFi 6 APs, surveillance PTZ cameras, and advanced POS terminals. The PoE12-30W supports network speeds of up to 2.5Gbps, while both the PoE12-60W* and PoE12-90W support network speeds of up to 10Gbps. Larger Power Budget Powers More PD Devices The PoE12-30W complies with the IEEE 802.3at PoE+ standard, while the PoE12-60W and PoE12-90W comply with the IEEE 802.3bt PoE++ standard to provide PoE power budgets of up to 30W, 60W, and 90W, respectively. They ensure interoperability and compatibility with other standard-based PoE-capable devices. Easy to Use with Robust Protection These three PoE injectors make it easy to connect network devices without any configuration. The wall-mount and desktop designs accommodate most installation scenarios. They have overload and short circuit protection, which shuts down the power immediately if those issues occur, leaving no damage to your equipment..PoE12-30W: 30 W power budget.PoE12-30W: Complies with IEEE 802.3at PoE+ standard.Easy plug-and-play desktop or wall-mounted installation.Overloading and short-circuit protection
Power up your network with the StarTech 4-Port Gigabit PoE+ Midspan Injector. Designed to deliver both data and power over a single Ethernet cable, this compact hub supports up to four PoE-enabled devices with speeds up to 1000Mbps and power output of up to 30.8W per port. Ideal for IP cameras, access points, and VoIP phones, it features auto-sensing technology for seamless compatibility and plug-and-play setup—no software required. Wall-mountable and TAA compliant, it’s perfect for professional installations where space and power access are limited. Integrated circuit protection ensures safe operation, while LED indicators provide real-time status at a glance..Functions as a PoE+ injector.Supports Gigabit Ethernet with data transfer rates up to 2 Gbps..Operates over wired Ethernet.Connects using standard RJ-45 Ethernet ports for seamless integration..Features four LAN ports for powering and networking multiple PoE devices..Designed for desktop or wall-mount installation in compact environments..2-year manufacturer warranty for parts and labor.
Add 10G Ethernet capability to your enterprise, server, or desktop computer Quickly adds one 10G Ethernet port, through an available PCI Express 3.0 x4 slot, to server or desktop systems NBASE-TTM technology allows 2.5Gbps and 5Gbps Ethernet speeds for cable lengths up to 100 meters, over existing CAT5e/6 cable infrastructure plus Power over Ethernet (PoE) over CAT cable Intel X550 chipset supports reliable and advanced network connectivity with Intel virtualization technology Compliant with IEEE 802.3, 802.3an, 802.1Q with full duplex and Wake-on-Lan support Feature innovative power management including 802.3az EEE (Energy Efficient Ethernet) and DMA Coalescing to increase efficiency and reduce power consumption Fits both standard and low-profile system chassis with the included brackets Extra large heat-sink guards against heat build-up for reliable performance and long life.NBASE-TTM technology allows 2.5Gbps and 5Gbps Ethernet speeds for cable lengths up to 100 meters, over existing CAT5e/6 cable infrastructure plus Power over Ethernet (PoE) over CAT cable.Intel X550 chipset supports reliable and advanced network connectivity with Intel virtualization technology.Compliant with IEEE 802.3, 802.3an, 802.1Q with full duplex and Wake-on-Lan support.Feature innovative power management including 802.3az EEE (Energy Efficient Ethernet) and DMA Coalescing to increase efficiency and reduce power consumption
The Ubiquiti® POE-24-24W-G 24 V gigabit PoE injector offers surge protection, clamping protection, maximum surge discharge and peak pulse current for PoE devices protection. It supports Gigabit LAN PoE interface..Gigabit PoE injector offers earth grounding and surge protection to help protect against electrostatic discharge events.Dimensions: 2.24"H x 3.47"W x 1.3"D.Power: 24 VDC/1 A, 90 - 260 VAC at 47 - 63 Hz (input), Current: 0.6 A at 120 VAC, 0.4 A at 240 VAC (input).Frequency: 65 kHz (switching).Interface/ports: Gigabit LAN PoE.Efficiency: 80+ percent, Output ripple: 1 percent, Line regulation: + 1 percent, Load regulation: + 3 percent.4-Pair powering: Pins 1, 2, 4, 5 (+) and pins 7, 8, 3, 6 (-), AC connector: IEC-320 C6, Data In/PoE: RJ-45 shielded socket.Surge discharge: 1500 A power, Shunt capacitance: <5 pf data, Response time: <1 nS.Meets IEC 60950-1:2005+A1, UL60950-1, EN55022:2010, EN55024:2010, FCC Class B certifications and standards
Netgear 16 PoE+ ports with 190W power budget. Unmanaged 300-Series PoE switches are easy, reliable, and affordable network connectivity for home and small offices. Providing power and data from a single Ethernet cable..Unmanaged PoE switch is easy, reliable, and affordable network connectivity for home and small offices.Dimensions: 1.7"H x 13"W x 8.1"D.Comes in black durable and rugged metal case.24 Gigabit ports.Simple set up with no software to install or configuration needed.Non-blocking switching architecture for maximum throughput at wire speed.Fanless design minimizes noise pollution, making the switch ideal for noise-sensitive environments.Designed to optimize power usage, lowering its cost to operate
The Axis Communications 5900-334 high PoE midspan with data connectivity, provides an easy and fast solution for powering network video products without the need to install power outlets and electrical cabling. This midspan conforms to the IEEE 802.3at for powering devices with high power requirements on a network. It provides 60 W power and is perfect for use with all Axis network video products featuring built-in PoE support. Midspan enables the network video devices to receive data and power over the same Ethernet cable and makes it easier to install in areas where power cabling and outlets are unavailable..PoE injector.Dimension: 1.5" x 2.4" x 5.9"; Weight: 0.7 lbs..Connectors: shielded RJ45, EIA 568A and 568B power connector C13.Data rate: 10/100/1000 Mbps.Power selector: 15 W or 30 W; Input voltage: 100 to 240 VAC; Frequency: 50-60 Hz.Local LED management display.Maximum output power: 60 W.Network cables: shielded category 5 (or higher).Port interfaces are located on the front panel, Port LED: power indicator and data connectivity.Mounting wall, shelf or DIN rail.Operating conditions: -10 to 45 deg C (14 to 113 deg F).RoHS, REACH, CB, WEEE, CE, EN 55022 Class B, EN 61000 3-2, EN 61000 3-3, EN 55024, FCC Part 15 Subpart B Class B, VCCI Class B.Optional accessories: AXIS midspan DIN clip a mains cable angle C13-open 0.5 m.PoE injector with 10/100/1000 Mbps data rate.
Power Cisco Business Wireless 100/200 series access points and other PoE devices with the CB-PWRINJ-NA 15.4W Single-Port PoE Injector. This unit will support devices that require up to 15.4W of PoE up to 328' away. It complies with the IEEE 802.3af standard and supports 1000 Mb/s passthrough data rates..Watts, Power Supply & Use: Delivers 15.4W PoE, Single-Port PoE Injector.Complies with IEEE 802.3af.Input Voltage: 90 to 264 VAC, 50 / 60 Hz.True Color: Black.Warranty: 1 Year.Power Cisco Business Wireless 100/200 series access points and other PoE devices with the CB-PWRINJ-NA 15.4W Single-Port PoE Injector.
The Ubiquiti EdgePoint PoE injector provides a variety of features to help protect your PoE devices: surge protection, clamping protection, maximum surge discharge, peak pulse current, AC cable with earth ground..PoE injector with a variety of features to help protect your PoE devices.Compatible with airFiber, airMAX, EdgeMAX, mFi, UniFi AP, UniFi Protect, airVision, UniFi LED, UFiber.Dimensions: 1.34"H x 4.84"W x 2.56"D.Comes in white.Offers 80W of power to an Ethernet cable for PoE devices.Contains 1 x Gigabit Ethernet RJ45 LAN and 1 x PoE ports.Output voltage: 54VDC/1.5A.Rated voltage: 100-240VAC, 50/60Hz.Surge protection: difference and common Mode.Meets or exceeds the CE, FCC, IC and UL standards
The Ubiquiti Networks PoE Injector is designed for the company's airFiber, airMAX, EdgeMAX, mFi, UniFi AP, and UniFi Protect / airVision products. This 24 VDC, 7.2W, 0.3A adapter provides protection against surge, clamping, maximum surge discharge, and peak pulse current..Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including: airFiber®, airMAX®, EdgeMAX®, mFi®, UniFi® AP, UniFi Video / airVision®.Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber's local network to the WISP network..120 V AC, 230 V AC Input - 24 V DC, 300 mA Output.Gigabit Ethernet Input Port(s) - Gigabit Ethernet Output Port(s).Ubiquiti Networks PoE Injector (24 VDC, 7.2W)
This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity.The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware.Contains PCI Express, SATA power (15 pin), and RJ-45 (PoE+).Supports the IEEE 802.3af and IEEE 802.3at (Type 1 and Type 2) standards for Power Sourcing Equipment (PSE) and can deliver up to 48V DC and 25.5W of power to compliant Powered Devices (PD).Leverages Intel vPro technology for remote management and troubleshooting capabilities. Improve bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and the streaming of online content.Access up to 2.5GBASE-T speeds using Cat5e (or better) cabling, to maximize existing networks and equipment.Connect Power over Ethernet enabled IP cameras, phones, or Wireless Access Points.Provide power to remote powered devices that require a PoE power source.Add multi-gigabit connectivity to a desktop or server.Compatible with Windows 10, 11; Windows Server 2019, 2022; Linux 5.8.x and up.Box contains: network card, low-profile bracket, quick start guide.2-year manufacturer limited warranty.This card supports the following advanced features: PXE Boot, WoL, VLAN tagging, 9 K jumbo frame, full-duplex, and Intel vPro technology..This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.
Extend your network reach with the Veracity Outreach Max GXT, designed for outdoor environments. This robust extender instantly doubles gigabit Ethernet cable range up to 200 meters while maintaining full 10/100/1000 compatibility. Powered by PoE, it eliminates the need for additional power sources, simplifying installation. Secure wall mounting with a detachable bracket ensures stability, and easy-fit cable seals accommodate cables with existing RJ45 plugs for hassle-free setup. Ideal for extending connectivity in demanding outdoor applications..Universal 10/100/1000 compatibility.Easy to fi t cable seals for cables with existing RJ45 plugs.Powered by POE (Power over Ethernet).Instantly doubles gigabit cable range to 200 metres
Upgrade your system with the StarTech 2-Port PCI Express Gigabit Ethernet Adapter, designed to deliver 2.5Gbps multi-gigabit speeds and Power over Ethernet (PoE+) support. Featuring dual Intel I225-V chipsets, this NIC provides up to 30W per port to power devices like IP cameras and access points—no injector needed. Compatible with IEEE 802.3af/at standards, it supports PXE boot, Wake-on-LAN, VLAN tagging, and jumbo frames for efficient network management. With a built-in heatsink, LED indicators, and low-profile bracket included, it’s ideal for desktops and servers in demanding environments..Built as an Ethernet adapter with PCIe interface and supports Gigabit speeds..Delivers up to 2.5Gbps data rate over wired connections; no wireless standard supported..Offers two RJ-45 ports with PoE+ support for connected devices..Compatible with Windows, Linux, and VMware ESXi systems..Complies with IEEE 802.3af/at/bz, 802.1Q, 802.1X, and other key networking standards..2-year manufacturer warranty.
The SGPAT10xx-105 is a 10/100/1000Base-T to 1000Base-SX/LX Gigabit Ethernet Media Converter, which easily and affordably facilitates the connection between different types of network cabling, while also injecting PoE+ power through the copper RJ-45 port. Being a Power Sourcing Equipment (PSE) device, the SGPAT media converter combines data received over a fiber optic link with 56VDC input power to provide power and data to a Powered Device (PD) over twisted pair cabling while complying with the IEEE 802.3at PoE+ standard, which is also backwards compatible with the IEEE 802.3af PoE standard. The converter is available in 2-port, 3-port, and 4-port versions and includes PD signature sensing and power monitoring features. Other features include over-current protection, under-current protection, and fault protection input. Active Link Pass Through (ALPT) is supported, which is an automatically activated version of Link Pass Through (LPT) that allows the converter to detect the loss of Receive (Rx) signals on either fiber or copper port and propagate the failure to the end devices, preventing the media converter from isolating those link failures. During a Link Pass Through event, the Auto Power Reset feature will re-set the power to the end PD device, ensuring it is ready to go when the LPT event is corrected..Wall mount, DIN Rail, or table top installation.External AC/DC power supply included with country specific power cord.2-port 10/100/1000 copper to fiber media conversion with IEEE 802.3at PoE+ on the copper port.Supports full 30 Watts of power to each twisted pair port.Various fiber versions available supporting fixed SC, fixed LC, and open SFP slots
The D-Link eight-port 10/100/1000 gigabit/fast Ethernet switch plugs into your network and gives you the power to connect a range of devices from IP cameras and phones to printers and wireless access points. The switch is built with eight different ports, so you can expand your network with multiple wired connections. With its fast Ethernet technology, the switch enables high performance without sacrificing speed or throughput..8 Ports - 4 x POE - 4 x RJ-45.10/100/1000Base-T - PoE Ports.Interfaces/ports: 4 x Network (RJ-45), 4 x PoE (RJ-45), 8 x gigabit Ethernet network.192KB buffer.Data transfer rate: 2000 Mbps (full-duplex).Filtering address table: 4K MAC entries/device.Power: 100 - 240 VAC, power consumption: 63.2 W(max).Dimensions: 1.5"(H) x 7.5"(W) x 4.7"(D).Media type supported: Cat 5 twisted-pair.Switching capacity: 16 Gbps.LED indicators:/port: Link/Activity/Speed/PoE Status,/device: power/PoE Max.Network technology: 10/100/1000Base-T Gigabit Ethernet.Layer supported: 2, Form factor: Desktop.Jumbo frame support: 9720.Features auto-negotiation, auto-uplink, cable diagnostics function, d-link green technology, flow control, packet filtering, quality of service (qos), store and forward.Certification & standards: FCC Class B, ICES-003 Class B, CE Class B, C-Tick Class B, VCCI Class B, cUL, LVD.Warranty: Lifetime limited.1 1/2"(H) x 7 1/2"(W) x 4.7"(D).Limited lifetime warranty.D-Link Eight-Port 10/100/1000 Gigabit/Fast Ethernet Switch - Robust Networking
The SISPM1040-362-LRT is a full managed PoE+ switch suitable for connecting and powering devices in hardened environments. The switch can supply up to 30 Watts per port on all four PoE ports simultaneously. The switch also includes the embedded Device Management System (DMS) software that provides the advanced tools necessary for total management of all IP addressable devices. The unique DMS provides security integrators with lower overall cost, less downtime and easier management of the entire PoE+ network. Transition Networks' hardened switches are certified to operate reliably in harsh environments such as those found on factory floors, outdoor enclosures or other challenging environments..Store-and-Forward Architecture with 16 Gbps Switching Bandwidth.Supports Jumbo frames up to 9.6K Bytes.Ring Protections: Industry standard G.8032 Ethernet Ring Protection Switching (ERPS), Support G.8031 Ethernet Linear Protection Switching (EPS), Rapid Ring with recovery time less than 20ms.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
07a60d6edc6fcc876b483c384509b02b.Features 24 networking ports to establish large network.Gigabit Ethernet port for ultra-fast network speeds.Can work as layer 3 routing for scalable network design.Management capability provides control over setup and configuration of your network.Built-in power supply to ensure all components are being supplied with accurate voltage
This switch is a next generation rack mount hardened switch with 80Gbps switching capacity. It provides (16) 10/100/1000 PoE+ ports, (4) 100/1000 dual speeds SFP ports and has (2) additional 1G/10G SFP+ slots..IPv4/IPv6 dual protocols.Supports Jumbo Frame up to 9K bytes.Authentication - RADIUS, TACACS+.With 10GBase-DWDM technology, get up to 10Gbps data transfer rate using dense wavelength-division multiplexing
OUTSOURCE 90 delivers the highest power allowed by the POE standard (802.3bt), used for external PTZ IP cameras and other very high-power applications. Delivers maximum remote power to IP cameras & POE devices 802.3bt compliant and GigE compatible 90W Power output Safety assured as POE is only enabled to compliant devices Integrated overload protection Compact, wall-mountable unit Sealed, fanless design for reliability.Complies with IEEE 802.3bt standard for maximum compatibility.Integrated overload protection ensures safe operation.Compact, wall-mountable design with sealed, fanless construction
The 4-port Amer Networks 10/100M Desktop PoE Switch provides a seamless network connection, integrating 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities. Cost saving and flexible with PoE power provision, the SD4P4U provides a PoE power injector function which is able to drive 4 IEEE 802.3af compliant powered devices. The switch also provides a simple, cost-effective, and highly reliable network connection for data as well as power..Expand your network capacity with the help of 9 networking ports and transfer your data quickly and easily.Cascade to other network devices through the uplink port to expand your local area network.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.Featuring Fast Ethernet ports to speed up the transfer rate up to 100mb/sec of large files and digital assets across your network.Layer 2 switch provides a complete lineup of features including IGMP snooping, port mirroring, and spanning tree.The unmanaged switch provides a quick, easy and cost-saving way to add wired networking to your home, office or small business; no intervention needed.Under-table mounting allows you to keep your table tidy and organized.Certifications and standards: CE, FCC
Upgrade the data paths of your local wired network to information superhighways with 16-port desktop Gigabit PoE switches..Address database size: 8000 MAC addresses.Total number of network ports: 16, number of PoE (RJ-45) ports: 8, number of PoE+ (RJ-45) ports: 8, port/expansion slot details: 16 x Gigabit ethernet network.Media type supported: Twisted-pair, Ethernet technology: Gigabit Ethernet, network technology: 10/100/1000Base-T.Performance: Bandwidth: 32 Gb/s.Status LEDs: Link, speed, activity, and PoE indicators.Form factor: Wall mountable, desktop.Layer supported: 2.Full line rate and forwarding rate of 64B frame at: 1.488 Mpps for 1000M port, 0.1488 Mpps for 100M port, 0.01488 Mpps for 10M port.Power: 54 VDC, 1.66 A, power consumption in idle/use (100% traffic): 4.52 W/11.31 W.Operating temperature: 0 - 50 deg C, operating humidity: 10 - 90% RH.Includes 16 port desktop Gigabit PoE switch, power adapter, quick start guide.Certifications and standards: IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az, 802.3af, and 802.3at (PoE+), FCC Class A, CE.Warranty: Lifetime limited
TRENDnet's Industrial Gigabit UPoE Splitter, model TI-SG104, networks a non-PoE device by using a Gigabit Ultra PoE connection and splitting it into separate power and gigabit data sources. The industrial gigabit UPoE splitter can power to up to two devices from a single UPoE source. A convenient DIP switch adjusts output power to 12V, 16V, 24V, or 48V in order to match power requirements for non-PoE devices. The UPoE splitter's dual DC power output provides greater device compatibility. UPoE Powered No power adapter necessary; the UPoE splitter takes a UPoE network connection, and splits power and data into separate connections to network a non-PoE device with power up to 100m (328ft.). GIGABIT ETHERNET : 1 x Gigabit UPoE input port, 1 x Gigabit output port NDAA + TAA COMPLIANT: With our NDAA and TAA compliant Industrial Gigabit UPoE Splitter, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only) MANUFACTURER PROTECTION: We stand by the quality of our products.The TI-SG104, Industrial Gigabit UPoE Splitter is backed and supported with 3 years of TRENDnet Manufacturer Protection. UPoE POWERED: No power adapter necessary; the UPoE splitter takes a UPoE network connection, and splits power and data into separate connections to network a non-PoE device with power up to 100m (328ft.). ADJUSTABLE VOLTAGE OUTPUT: Convenient DIP switch adjusts voltage output to 12V (2.3A), 16V (2.3A), 24V (2.3A) or 48V (1.25A) to match non-PoE device power requirements. WALL MOUNTABLE: The UPoE splitter's wall mountable design accommodates most installation scenarios. DUAL DC POWER OUTPUT TERMINAL BLOCK: The UPoE splitter includes a dual DC power output terminal block, powering for up to two devices For best performance pair with UPoE switches or injectors; Save on installation and equipment cost Full Duplex Gigabit speeds: IEEE 802.3bt compatible More from the Manufacturer.Full Duplex Gigabit speeds.IEEE 802.3bt compatible.For best performance pair with UPoE switches or injectors.Save on installation and equipment cost
The TRENDnet® TI-PG62 6-Port hardened industrial Gigabit PoE+ DIN-rail switch has 120 W PoE+ power supplies for up to four PoE devices with PoE+ power. It comes with an output alarm relay to indicate the event of input power failure. It can withstand a high degree of vibration, shock, protection against ESD/EMI/surge and has a switching capacity of 12 Gbps. Grounding point protects the device from external electrical surges..Hardened industrial gigabit Ethernet switch withstands a high degree of vibration and shock.6 x Gigabit Ethernet network.Dimensions: 5.6"H x 4.1"W x 1.4"D.Power consumption: 5.76 W.Certifications and standards: Meets CE, FCC, Shock (IEC 60068-2-27), Freefall (IEC 60068-2-32), Vibration (IEC 60068-2-6) standards.Data transfer rate: 10 Mbps (half duplex), 20 Mbps (full duplex).Data RAM buffer: 1024KB, switching fabric: 12 Gbps, MAC Address table: 1 K entries, jumbo frame: 9KB, forwarding rate: 8.9 Mpps (64-byte packet size).Power supply: 100 - 240 VAC, 50/60 Hz, 2 A input, 48 VDC, 3.34 A output.Form factor: Rail mountable.Features hardened components rated for extreme temperatures, dual redundant power inputs, auto-negotiation, auto store and forward architecture
The NETGEAR GS108LP is the industry’s first flexible PoE+ 8-Port Gigabit Ethernet plug-and-play switch with 60W PoE budget. The Industry’s first flexible PoE+ integrated technology allows you to increase or decrease the PoE budget at any time to provide to your devices the power they need with interchangeable external power supply and an intuitive power selector. The flexible mounting options (rack-mount, wall-mount or desktop) and the compact and fanless design make the GS108LP an ideal option for any business or home..PLUG AND PLAY-Simple set up with no software or configuration needed.POWER-OVER-ETHERNET-8 Gigabit PoE+ ports with 60w PoE power budget.FLEXIBLE MOUNTING-Rack/Desktop or Wall-Mount to be used in any environment.FUTURE-PROOF POWER- Upgradable PoE budget with Interchangeable power supplies.SMALL AND SILENT-Small and sturdy metal case and fanless quiet operation.ProSAFE Lifetime Protection-Lifetime Limited Hardware warranty, Next Business Day Replacement and 24/7 chat with a NETGEAR expert
With a Power-Over-Ethernet (PoE) enabled network switch/router, this Logitech Mevo dongle provides power and wired network connection to your Mevo Start. The Ethernet power adapter also has a USB-C input to power your camera when used with a non-PoE network switch/router..This Ethernet power adapter provides power and wired network connection to your Mevo Start camera.Dimensions: 1.06"H x 1.06"W x 3.13"D.Compatible with Logitech Mevo Start livestreaming camera.Comes in black.Connectivity: USB 2.0 480Mbps; Ethernet 10/100Mbps.Power over Ethernet capabilities: IEEE 802.3-2012 compliant, PD Class 0; Type 1 PD: 37V to 57V operating voltage; maximum input power: 13W.Features a 5V/2A USB Type-C charge port.Power: input (Mevo Start to PoE adapter): 5V/0.5A; output (PoE adapter to Mevo Start): 5V/1.5A.Package contents: Ethernet power adapter and 6.56' angled USB Type-C extension cable
The Trendnet 48VDC3000 160 W power adapter provides an output voltage of 48 V and output current of 3.34 A for reliable performance. The AC adapter is compatible with TI-PG541 web smart PoE+ switch..Power adapter.Compatible with TI-PG541.Input: 100 - 240 VAC, 50/60 Hz, 2.0 A.Output: 48 V, 3.34 A, 160 W maximum.AC-DC adapter.Reliable performance.Comes with 1 year warranty.Trendnet power adapter compatible with TI-PG541 having 100 - 240 VAC, 50/60 Hz, 2 A input, 48 V, 3.34 A, 160 W maximum output.
The HPE Aruba Networking X372 54VDC 1050W 110-240VAC Power Supply (JL087A#B2C) is a high-performance, hot-pluggable, and redundant power supply unit designed to enhance the reliability and efficiency of HPE Aruba networking devices. It delivers a robust power capacity of 1050 watts, with up to 740 watts specifically allocated for Power over Ethernet (PoE) applications, ensuring seamless operation for PoE-enabled network switches. Engineered for flexibility, it supports an input voltage range of 110-240V AC and outputs a stable 54V DC, making it ideal for enterprise networking environments. The compact design, measuring 3.27 x 8.88 x 1.58 inches and weighing only 1.94 lbs., allows for easy installation and compatibility with Aruba 2930M, 3810M, and 6300M Series switches. This power supply is optimized for energy efficiency while ensuring uninterrupted network performance, making it a reliable solution for organizations that demand high-power networking infrastructure..The HPE Aruba Networking X372 54VDC 1050W Power Supply is a hot-pluggable, redundant power supply designed to provide reliable power for Aruba network switches, ensuring efficient operation and Power over Ethernet (PoE) capabilities..Designed for seamless integration with Aruba 2930M, 3810M, and 6300M Series switches, ensuring optimal performance and compatibility with PoE-enabled network infrastructures..Compact and space-efficient, measuring 3.27 x 8.88 x 1.58 inches (8.31 x 22.56 x 4.01 cm), making it easy to install within compatible Aruba networking devices..Features a sleek silver and black finish with durable metal housing, providing robust protection and heat dissipation for long-lasting performance..Sold individually as a single-unit power supply (1 Each), ensuring customers receive a reliable and complete power solution for their networking needs.
The USW Flex Utility is an outdoor weatherproof enclosure designed for use with the UniFi Switch Flex, USW-Flex. It includes an Ethernet patch cable and a 60W PoE adapter, which provides a maximum PoE budget of 46W. The USW Flex Utility can be easily mounted on a pole, provides clean cable management and screw lock for security..Flex switch adapter kit for streetlight pole applications.Dimensions: 9.8"H x 8.58"W x 2.36"D.Designed for use with the UniFi Switch Flex, USW-Flex (sold separately).Comes in white.Package contains: outdoor weatherproof case, pole holder, and Gigabit PoE power adapter (60W).Easily mounted on a pole, the USW Flex Utility provides clean cable management and a screw lock for security
Lantronix Ethernet Over 2-Wire Extender With PoE+ provides the ability to quickly and easily upgrade Ethernet networks with modern PoE powered IP devices without the need to replace the existing copper wire infrastructure. The extenders leverage existing 18-24 AWG unshielded twisted pair CAT 5, CAT 3 and other twisted 2-wire phone wire cabling infrastructure to extend the Ethernet network at half Gigabit speeds and provide data and power to IP devices in remote locations, saving time and money over installing new cable. NDAA Compliant, TAA Compliant.Connection for optional power on Remote device.Client for DHCP, DNS, NTP.IPv4 and IPv6 supported.128 Bit AES encryption over 2-wire