Rack Mount Hardware

StarTech.com® Vertical wall mount equipment rack bracket is compatible with network device, power strip, patch panel. 5.9" x 19.8" x 4.1" Rack bracket constructed with solid steel is ideal for mounting on virtually on a wall or horizontally under a desk to save space..Capacity: 125.3 lbs..Compatibility: Network device, power strip, patch panel.Dimensions: 5.9"(H) x 19.8"(W) x 4.1"(D).Frame type: Open frame.Wall mountable: Yes.Wall mounting holes are 16" center to center for greater stability, and mounting into standard wall studs.Equipment can be vertically wall mounted, or horizontally under a desk.Rack size: 19".Rack units: 2U.StarTech.com® Vertical wall mount equipment rack bracket measuring 5.9" x 19.8" x 4.1" offers space-savings for environments lacking the footprint space for a full size server equipment rack.

Extension rails and brackets for four-point mounting for Cisco Catalyst 9500 Series.Rack Rail Bracket Kit.Device Supported: Switch.Compatibility: Cisco Catalyst 9500 Series Switch.Package Content : Brackets, Extension rails.For Cisco Catalyst 9500 Series – High-End

Zebra Technologies Zebra BRKT-SCRD-SMRK-01 Mounting Bracket for Cradle.Allows for rack and wall mounting of one 5-Slot, 10-Slot, or 20-Slot Charger. Also can be used to mount up to four 4Slot Battery Chargers or Single-Slot Cradles.Bracket can be mounted on standard 19" network rack or on a wall..Cable routing slots & removable power supply holder tray..Adjustable tabs & screw mounts for easy hanging/installation..Works with Zebra's high-end performance products..WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer, birth defects, or other reproductive harm..Rack/Wall Bracket, allows to install any multi-slot Sharecradle on a wall or a 19inch IT rack. Provides a holder for power supply and cords. Also allows to install up to four 4-Slot Spare Battery Chargers. Includes screws required for installation

StarTech.com® Vertical wall mount equipment rack bracket is compatible with network device, power strip, patch panel. 5.9" x 19.8" x 2.4" Rack bracket constructed with solid steel is ideal for mounting on virtually any wall/ceiling surface..Capacity: 125.3 lbs..Compatibility: Network device, power strip, patch panel.Dimensions: 5.9"(H) x 19.8"(W) x 2.4"(D).Frame type: Open frame.Wall mountable: Yes.Rack size: 19".Rack units: 1U.StarTech.com® Vertical wall mount equipment rack bracket measuring 5.9" x 19.8" x 2.4" offers space-savings for environments lacking the footprint space for a full size server equipment rack.

This Rackmount.IT rack gives you the ability to mount your Fortinet desktop firewalls in a 19" rack. The rack is tailored specifically for the listed models to guarantee a perfect fit. The switch is placed on the rack with connections to the front, ensuring that the connections are easily accessible. Assembly will take about 5 minutes. Simply slide your Cisco Meraki device in the kit, place front panel on the front of the rack and fix the power supply..This rack gives you the ability to mount your Fortinet desktop firewalls in a 19" rack.Compatible with FortiGate 40F, FortiADC 60F.Dimensions: 1.73"H x 18.98"W x 8.54"D.Comes in signal white.Box contains: FortiRack with RJ45 couplers, cables, assembly materials, installation guide

The 2U 14" deep wall mounting bracket for patch panels delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment for a more efficient and accessible operating environment. It's the perfect solution for areas where space is at a premium like SoHo (small office, home office) environment, or space limited server room because it doesn't take any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office, or IDF. The sturdy steel construction is especially helpful for durability and stability. Also, because The open frame wall rack's mounting holes are positioned 16in. apart, allowing you a simple and secure wall-stud anchoring to your existing construction framework. M6 square cage nuts and M6 screws are included with the wall-mount bracket, additionally, M5x25 mounting screws are included to save you the hassle of sourcing separate mounting hardware. The RACK-2U-14-BRACKET is backed by a StarTech.com lifetime warranty and free lifetime technical support..2U WALL MOUNT RACK: This 19-inch wide low profile wall mounted rack has a maximum mounting depth of 14 in (35 cm), recommended for networking equipment up to 12 in deep, leaving 2 in for cable routing; Maximum weight capacity of 77 lbs. (35 kg).EASY TO INSTALL: The 2U wall-mounting patch panel bracket ships fully assembled and comes complete with M6 screws and M6 square cage nuts for easier equipment installation & includes wall mounting hardware; Predrilled wall mounting holes spaced 16" apart.COLD-ROLLED STEEL CONSTRUCTION: The wall mounting rack features a 1/16 in (1.5 mm) thick solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable opening slot for in-wall cable routing in your network closet, server room, wiring closet, classroom.Durable wall mount rack made of cold rolled steel.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; This 2U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount equipment that is up to 14 inches deep, such as patch panels or network switches, to your wall

The StarTech.com® RK619WALLV 6U black vertical wall-mount server rack is a suitable mounting solution for virtually any surface such as wall, ceiling or desk. It is perfect for LAN switch, patch panel and A/V equipment. It has solid steel construction. This server rack measuring 5.9" x 19.8" x 7.6", offers trouble-free setup with wall-mount installation. It compliments standard construction framework. It includes 16 M5 cage nuts, 16 M5 screws with washers, six wood screws and instruction manual..Wall mount server rack is suitable for LAN switch, patch panel and A/V equipment.Dimensions: 5.9"H x 19.8"W x 7.6"D (external).Color: Black, Material: Solid steel material for durability.Form factor: Rack mountable, Rack height: 6U.Save space in your office or server room by mounting IT or AV equipment vertically to a wall or horizontally under a desk or work bench.6U bracket separate mounting patterns for both ceilings and walls.Features hassle-free setup with wall-mount installation holes spaced 16" apart and matching standard construction framework.Contains 16 x M5 cage nuts, 16 x M5 screws with washers, six wood screws and a instruction manual.RoHS Compliant.Weight: 44.8 oz..Comes with lifetime warranty

The RACK-10U-14-BRACKET 10U 13.78 in. Deep Wall Mounting Bracket for Patch Panel delivers a sturdy and dependable equipment storage option, allowing you to wallmount equipment for a more efficient and accessible operating environment. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in equipment to a wall..StarTech.com 10U Wall Mount Network Rack, 14 in Deep (Low Profile), 19" Patch Panel Bracket for Shallow Server.This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm]..The 10U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts.The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution.Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room.Color come Black.Material Alloy Steel

StarTech.com® Fixed server rack cabinet shelf can withstand up to 175 lb of weight capacity and has an adjustable mounting depth of 19" -38". Shelf features rugged steel construction for durability in harsh environments..Capacity: 80 kg.Dimensions: 1.6"(H) x 17 1/2"(W) x 27.6"(D).Adjustable mounting depth of 19" - 38".Low cost adjustable shelf for most 19 inch wide cabinets and racks.Weight capacity up to 175 lbs..Vented shelf plate to preserve airflow.Lifetime limited warranty.StarTech.com® Fixed server rack cabinet shelf measuring 1.6" x 17 1/2" x 27.6" is adjustable for most 19" wide cabinets and withstands 250 lb of weight capacity.

Startech.com® 12U Wall mount server rack is constructed of high-quality SPCC cold-rolled steel for added strength and durability. Rack allows for maximum airflow to keep the equipment operating temperatures cooler..Material: Cold-rolled steel frame.Form factor: Wall mountable.Dimensions: 25.5"(H) x 23.8"(W) x 21.9"(D) external.Black.Rack type: 4-post, U height: 12U, enclosure type: steel.Frame type: Open frame.Maximum weight capacity: 63.50 kg.12U hinged wall-mount rack, hinged design for easy access to rear panels, 4 post design for added stability.Open frame design provides additional airflow, sturdy SPCC cold-rolled steel construction.Perfect for installing network switches out-of the way and high up on a wall in a branch office, warehouse, or superstore location.Ideal for small and medium businesses requiring small rack solutions dispersed throughout the organization.Mount audio/video broadcast or distribution components.Includes 1 x hinged wall-mount rack, 48 - #10-32 UNF panel screws, 48 - #10-32 UNF cage nuts, 1 - instruction manual.Weight: 39.9 lbs..Warranty: Lifetime.Startech.com® 12U Wall mount server rack is perfect to fit 19" servers, A/V or network equipment and features open frame.

This shelf is constructed using SPCC commercial grade cold-rolled steel. It is a durable fixed rack shelf that can hold up to 22kg of equipment and is a perfect solution for storing small, non-rackmount equipment, and tools..Dimensions 3 1 2"(H) x 19"(W) x 16"(L).Weight capacity 50 lbs..Frame type Steel.Black.Mounting options Front mount (front only).Supply additional storage space for mission critical hardware and non-rack mount equipment.Material Steel.Vented server rack shelf improves airflow and helps lower temperatures in the cabinet.Universal 19" rack design makes it simple to add a storage shelf to almost any rack or cabinet.Durable steel construction holds up to even the harshest industrial environments.Enclosure thickness 0.1".Rack unit 2U height.Includes 2U fixed rack shelf, 4 x M6 screws, 4 x M6 cage nuts, instruction manual.Certifications and standards CE, RoHs.Warranty Lifetime limited.Silver.Startech.Com® CABSHELF Universal Vented Rack Mount Cantilever Shelf improves airflow and helps lower temperatures in the cabinet.

2.5 SSD/HDD Mounting Bracket for 3.5 Drive Bay - 5 Pack - Tool-less - Hard Drive Mounting Kit (BRACKET125PTP).Compatible with most 2.5" SSD/HDD drives including: IDE, SAS, SATA, U.2 and more.Install one 2.5” SSD or HDD into a single 3.5” bay.Supports drives 7 mm or 9.5 mm in height.Tool-less drive and bay installation.2.5" Hard Drive Mount | Tool-less Installation

The StarTech® WALLMOUNT8 wall-mounting bracket provides 8U of space for mounting shallow rack-mount equipment that is 12" deep. This accessory in black, is made of solid steel and offers hassle-free installation. It optimizes your working space by efficiently mounting your equipment on your wall instead of taking up desk space or other usable surface areas..Wall mounting bracket provides 8U of space for mounting shallow rack-mount equipment that's 12" deep or less to the wall.Dimensions: 14.3"H x 20.5"W x 13.7"D (product), 14.3"H x 20.5"W x 12"D (external), 13.5"H x 17.7"W (internal).Black steel.Frame type: Open frame.Rack type: 2-post.Maximum weight capacity: 80.2 lbs..Improve efficiency in your office or server room by mounting shallow equipment to the wall.Sturdy installation of mission critical equipment with solid steel design.Hassle-free setup with wall mounting holes spaced 16" apart, matching standard dry-wall framework.Rear access panel for cable management.Includes 1 x wall-mount bracket, 24 x M5 cage nuts, 24 x M5 screws with washers, 1 x M6 K-nut, 6 x wood screws, 1 x instruction manual.RoHS compliant.Weight: 17.8 lbs..Comes with lifetime warranty

The 4U 13.78in. (35cm) deep wall-mounting bracket for patch panels and network equipment, delivers a sturdy and dependable equipment storage option, allowing you to wall mount data/IT equipment up to ta total of 44lbs. (20kg). It's the perfect solution for areas where space is at a premium like small office/home office environments or spaces with limited server room because it doesn't take up any floor space. The mounting bracket features an all-steel design and is suitable for mounting patch panels, or other slim 19in rack equipment to a wall, and to organize cabling or equipment in your network closet, wiring closet, back office or IDF. The sturdy steel construction is especially helpful for durability in harsh environments. The open frame wall rack's mounting holes are positioned 16in. apart, matching typical drywall construction framework to ensure simple and secure wall-stud anchoring. Cage nuts and screws are included with the wall-mount bracket, to save you the hassle of sourcing separate mounting hardware. The bracket is ideal for mounting equipment 12" or less in depth to ensure there is room for cabling..4U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 13.78 in [35 cm], recommended for networking equipment up to 12in deep, leaving 1.75in for cable routing; maximum weight capacity of 44 lbs. [20kg].COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware; Installs onto 16" studs with mounting holes.EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.EASY TO INSTALL: The 4U wall mounting patch panel bracket ships fully assembled and comes complete with 16x M6 Screws and 16x M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; this 4U wall mount rack backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.Mount networking equipment and shallow rackmount devices with this 4U wall-mountable rack

The open rack features an adjustable depth ranging from 12-20 inches to accommodate larger data, network, and telecommunications devices. With a maximum depth of 20 inches, this rack allows for mounting of shelves and other accessories with enough clearance at the back for cable management. The open-frame design help to keep your equipment cool and easily accessible from different angles. The wall mounting holes are positioned 12 and 16 inches apart (center to center) providing a convenient and effecting anchoring, making it suitable for mounting on virtually any wall surface or construction framework. This 24U rack includes M6 square cage nuts and M6 screws to save you the hassle of sourcing separate mounting hardware for your equipment. This rack can be mounted to the wall in a server room, data closet, or office expanding your valuable floor space..2-Post 24U open frame network rack with 12-20in (30.5-50.8cm) adjustable depth for AV, IT computer, switches, patch panels, and PDUs.Durable 19" data server rack features vertical rails made of 2.0mm SPCC cold-rolled steel; Unobstructed airflow to help keep your equipment cool.Efficient flat pack shipping and hassle-free installation; Easy install with access to all sides.M6 square cage nuts, M6 screws and plastic washers included.EIA/ECA-310 compliant.Weight capacity 200lbs/90kg.Mount The RACK-24U-20-WALL-OA 24U Open Frame Wall Mount Equipment Rack with Adjustable Depth is a high-quality, sturdy relay rack solution that is easy to assemble and install into any environment.

This server rack provides 24U of storage space in a sleek, secure cabinet for storing standard 19" rack-mount devices such as Dell®, HP® and IBM® servers, along with telecommunication and A/V equipment. The rack is compatible with EIA-310 compliant equipment and supports a total load capacity of 450 kg (992 lb.).Hassle-free equipment installation. This rack includes a variety of features that enable you to easily incorporate plenty of equipment. With adjustable mounting rails, you can easily change the rail depth from 3" up to 30.7" (76.2 mm - 780 mm) to ensure compatibility your standard rack-mount equipment. The added depth also provides support for additional cable and power management behind your equipment..Easy rack-mount equipment installation.Keeps your rack-mount equipment secure with lockable doors.Keep your equipment at an optimal temperature with passive cooling

The Aruba 19-inch Rack Mount Kit is designed for use with Aruba 9004 Gateway..19" rack mount kit.Compatible with Aruba 9004 series network gateway.Supports installation of two gateway units.Package contents: rack mount tray, eight M3 x 5 mm flat head screws, four M6 x 15 mm Phillips pan head screws, four rubber clamps, installation guide

Innovation Universal rack rail is designed to replace OEM rails included with apple, HP, IBM and dell server racks. Rack rail has mounting depth range of 10" - 31 3/4" and can withstand a maximum weight of 20.4 Kg..Capacity: 20.4 kg.Compatibility: Servers, storage, computers.Hole type: Compatible with the industry standard 3/8"(10 mm) square hole racks, cage nuts included for square hole mounting, compatible with all standard round (non-threaded) holes.Rack type: 4Post, 2Post.Rail type: Fixed.Mounting depth range: 10" - 31 3/4"(254 - 806 mm).Cable management: Cabling crossbar is standard.Height (rack units): 1U.Overall installation depth: Maximum overall depth is the same as the rack's mounting depth.LIFETIME Limited Warranty - Includes LIFETIME Next Business Day (NBD) Replacement, LIFETIME Technical Chat online support, and 90 days free Technical Phone support.Innovation Universal rack rail is designed to support variety of server racks and is compatible with servers, storage and computers.

This 9U server or network rack cabinet lets you mount your EIA-310 compliant equipment to the wall, in a secure enclosure. The enclosure features adjustable mounting depth from 3 to 20.8 in. to provide a robust storage solution for your rack-mount equipment. To provide secure stability for your heaviest equipment, this rack offers 4-post mounting, supporting a higher weight capacity per U than 2-post racks and supporting a total load capacity of up to 200 lb. (90 kg). Save space in your office or server room Save valuable floor space, by wall-mounting the enclosure. The wall-mounted design makes this enclosure the ideal solution for optimizing equipment storage in your classroom, retail store, server room or office. This rack also includes a 1U shelf that gives you a stable surface for storing your tools placing equipment that's not rack-mountable..Save space by wall-mounting your servers or networking equipment.Easily install your equipment with mounting hardware included.Secure your mission-critical equipment with a locked enclosure

The Traxx Solutions rack mount kit allows you to easily secure your Cisco Meraki desktop form factor security appliances to a standard 19" 1U network rack. The rack is constructed from durable 16-gauge steel with an industrial powder coated finish and is guaranteed to fit the models: MX68, MX68W (rear facing orientation only), MX68CW (rear facing orientation only). An assortment of mounting holes support rear facing mounting for network connection visibility or forward mounting for a cleaner rack aesthetic, leaving only the status indicator light in view..This rack mount kit allows you to easily secure your Cisco Meraki desktop form factor security appliances to a standard 19" 1U network rack.Dimensions: 1.75"H x 19"W.Made of durable 16-gauge steel in a black powder-coated finish.Compatible with Cisco Meraki MX68, MX68W (rear-facing orientation only), MX68CW (rear-facing orientation only)

The Traxx Solutions rack mount kit allows you to easily secure your Cisco Meraki desktop form factor security appliances to a standard 19" 1U network rack. The rack is constructed from durable 16-gauge steel with an industrial powder coated finish and is guaranteed to fit the models: MX64, MX64W (rear facing orientation only), MX67, MX67W (rear facing orientation only), MX67C (rear facing orientation only). An assortment of mounting holes support rear facing mounting for network connection visibility or forward mounting for a cleaner rack aesthetic, leaving only the status indicator light in view..This rack mount kit allows you to easily secure your Cisco Meraki desktop form factor security appliances to a standard 19" 1U network rack.Dimensions: 1.75"H x 19"W.Made of durable 16-gauge steel in a black powder-coated finish.Compatible with Cisco Meraki MX64, MX64W (rear-facing orientation only), MX67, MX67W (rear-facing orientation only), MX67C (rear-facing orientation only)

Rack Solutions Slide Rails is compatible with Dell PowerEdge servers from generations 11-15, including models like R7515, R720XD, R820, and more. These dry slide rails are engineered for easy serviceability, allowing smooth extension of equipment without the need for an OEM rail kit. Compatible with both 2-post and 4-post racks, the rails feature adjustable mounting depths of 12" to 32" for 4-post racks and 3" to 6" for 2-post racks. Ideal for threaded, round, or square holes, this rail kit offers a robust, long-lasting solution for managing your Dell servers in any standard EIA-310 rack..Zinc plated dry slide rail kit.4-Post and 2-post 19" EIA 310 standard server racks. Compatible with the industry standard 3/8" (10 mm) square hole racks.Fixed rails compatible with 2U Dell PowerEdge servers from generations 11-15.Cage nuts included for square hole mounting compatible with all standard round (non threaded) holes &h all standard threads including 10 32, 12 24 and metric M6.Adjustable mounting depth of 12" to 32" for 4-post racks and 3" to 6" for center mount 2-post racks.Fits square, round, threaded holes.Fits square, round, and threaded hole racks, supporting L, C, and Z rack upright shapes.Front mounting flange of the rail kit engages the Dell slam latch.Assorted hardware included, Phillips head screwdriver required

The Tripp Lite SmartRack® SRWO8U22MD 8U/12U/22U expandable very low-profile patch-depth open rack frame has heavy-duty steel construction with a durable black powder-coated finish. The cabinet has a maximum load capacity of 150 lb. Easy to assemble and suitable for installing patch panels and other shallow networking equipment in secure IT areas with limited floor space..Expandable very low-profile patch-depth open rack frame is suitable for installing patch panels and other shallow networking equipment.Dimensions: 45.22 (8U), 63 (12U), 107.45 (22U) cm H x 51.08 cm W x 30.48 cm D, 19"D (rack), Maximum device depth: 30.48 cm.Black steel.Form factor: Wall mountable.Maximum weight capacity: 150 lbs..Rack height (U spaces): 8.Houses EIA-standard 19" rack equipment up to 11 1/2" deep.Open-frame design in 3 configurations: Assembles in 8U, 12U or 22U to meet current needs, allows easy access for organizing, servicing and cabling.Made from heavy-duty steel with a black powder-coated finish, easy to assemble w/included hardware, vertical mounting rails with threaded 12-24 holes.Includes rack frame, 24x12-24 mounting screws, 16xM5 cap screws, 8xM6x12 head screws, 2xshort/long rails, 2xmounting rail tie plates, owner's manual.Meets Green compliant, RoHS, EIA-310-D, IEC 60297-3-100 standards.Weight: 6.71 Kg, Weight varies depending on configuration 8U = 10.24lbs, 12U = 11.25lbs, 22U: 14.08 lbs..Comes with 5 year limited warranty

Startech.com® Standard universal server rack cabinet shelf in black color provides additional storage space for mission critical hardware. Shelf helps to efficiently organize your mission critical computer hardware and accessories..Capacity: Up to 20 kg.Compatibility: 7230CABINET, 2630CABINET.Dimensions: 3.5"(H) x 19"(W) x 15.7"(D) external, 17.4"(W) internal.Rack height: 2U, rack width: 19".Black.Material: Steel.For use with all 19" wide server racks and cabinets.Standard universal server rack cabinet shelf helps to efficiently organize your mission critical computer hardware.Supply additional storage space for mission critical hardware.Includes 1 x fixed shelf for 7230CABINET, 4 x M6 cage nuts, 4 x M6 screws.Certifications and standards: RoHS.Weight: 7.7 lbs..Warranty: Lifetime.Startech.com® Standard universal server rack cabinet shelf in black color is ideal for use with all 19" wide server racks with cabinets and has rugged steel construction for durability.

Use this wall-mount network cabinet to mount your server or networking equipment to the wall, with a hinged enclosure for easy access. This 26U server or network rack cabinet lets you mount your EIA-310 compliant equipment to the wall, in a secure enclosure that has a hinged rear door for easy access to your equipment. The enclosure features adjustable mounting depth from 3 to 20 in. to provide a robust storage solution for your rack-mount equipment. To provide secure stability for your heaviest equipment, this rack offers 4-post mounting, supporting a higher weight capacity per U than 2-post racks and supporting a total load capacity of up to 200 lb. (90 kg)..Save space by wall-mounting your servers or networking equipment.Hassle-free access with a hinged cabinet.Supporting a total load capacity of up to 200 lb. (90 kg).

The Rack Solutions® 118-1619 universal rack-to-tower conversion kit in black, is perfect for 1U/2U server. It mounts on any 1U - 2U server on its side. The high friction foam keeps the server from slipping. The conversion kit clamps the server using a tension knob and the rubber feet protect the tabletop..Universal rack-to-tower conversion kit is perfect for 1U/2U server.Dimensions: 5.9"H x 10.5"W x 2.6"D.Comes in black color.Mount any 1U - 2U server on its side.Easily adjusts to fit 1U or 2U servers.Smaller footprint saves room, front bezel operates like normal.High friction foam keeps the server from slipping.Clamps the server using a tension knob, rubber feet protect the tabletop

This StarTech 1U Universal fit mount shelf is designed to fit any 19" wide rack..19" 1U.Heavy duty steel construction.Supports a total weight of 33lbs/15kg.Mounting screws included.Mounting options Front mount (front only).Material Steel.Very compact form factor makes it ideal for any wall mount server rack, and even network switching racks.Universal 19" rack design makes it simple to add a storage shelf to almost any rack or cabinet.Durable steel construction holds up to even the harshest industrial environments.Supply additional storage space for mission critical hardware and non-rack mount equipment.Rack unit 1U height.Includes 1U fixed rack shelf, 4 x M6 screws, 4 x M6 cage nuts.Certifications and standards CE, RoHs, UL.Warranty 3 years limited.Startech.Com® CABSHELF1U Universal Fixed Server Rack Cabinet Shelf has very compact form factor that makes it ideal for any wall-mount server rack, and even network switching racks.

The StarTech.com equipment rack is made with an adjustable design and an open frame, making it a convenient solution for businesses of all sizes. It mounts easily onto any wall, so you can reduce clutter and make the most of your server or network room without taking up valuable floor space. The StarTech.com equipment rack is made with an adjustable design and an open frame, making it a convenient solution for businesses of all sizes. It mounts easily onto any wall, so you can avoid clutter and make the most of your server or network room without it taking up valuable floor space. This adjustable server rack has a maximum weight capacity of 135.3 pounds to let you mount things ranging from servers to storage bays on it. Sporting a simple and rugged design and form this rack is easy to install and set up. This rack has a two post rack type and open front door type. With rails that can be adjusted between 12 and 20 inches, this rack offers different options for configuration. This adjustable server rack shelf includes 8U open frame wall mount rack components, assembly hardware, M5 screws and cage nuts..Product Type: Equipment rack.Rack Type: 2-post.Frame Type: Open frame.Front Door Type: Open.Mounting Type: Wall-mount.Industry Standards: EIA RS310-C.Package Contents: 8U open frame wall mount rack components, assembly hardware, m5 screws and cage nuts.Adjustable Rails: 12" - 20".Ideal for small and medium businesses requiring small rack solutions dispersed throughout the organization.Wall mount holes are 16" from center to center for mounting to any standard wooden studs.Low cost rugged design for simple implementation.U Height: 8U.Dimensions: (H x W x D) 19.5" x 21.1" x 13.2".Weight Capacity: 135.3 lbs..Weight: 23.9 lbs..Warranty: Lifetime limited.StarTech.com equipment rack is adjustable and shows off a heavy-duty design

The 4XEM's 4U 19" wall-mounted open rack provides a durable and solid design. The 4XEM 4U open wall-mountable bracket features heavy gauge material to ensure a stable installation platform. The universal standard design is compatible with 19" equipment from popular manufacturers. The 4U open bracket also provides a swing hinge to allow for easy installation of equipment and cabling. It is designed specifically for small businesses, home offices, restaurants, classrooms, and IT professionals..Wall-mounted open bracket in 4U form factor is designed specifically for small business, home offices, restaurants, classrooms, and IT professionals.Dimensions: 7.06"H x 19.72"W x 12.01"D.Made of SPCC cold-rolled steel, comes in black.Meets or exceeds EIA/ECA-310-E standards.Fits 19" equipment from popular manufacturers.Keeps all networking gear organized.Saves space and permits easy access for maintenance.Swing hinge.Cable entry on both sides and rear of rack.Weight capacity: 77.16 lbs..Mounting hole types: square (for cage nut).Weight: 7.5 lbs..Fully assembled.Package contains: a wall-mount rack, 12 M6 screws/washers/nuts, and four wall anchors (concrete).1-year manufacturer limited warranty

Innovation 2 Post, 2U kit relay rack mount kit is made of solid steel and has simple installation compatible with 3" uprights. Kit is compatible with many Dell, HP, IBM, other equipment includes hardware..Material: Solid steel construction.Compatibility: IBM x300 server, IBM x305 server, IBM x325 server, IBM x330 server, IBM x335 server, IBM x345 server.Only convert the space you need.2u, 3u, 4u, 5u and 7u.Quick and simple installation.Compatible with many dell, hp, ibm, other equipment.Preferred 2post mount by oem manufacturers.Compatible with 3" uprights.Dimensions: All brackets are 29 1/8" wide, height depends on u size.Weight: 50 lbs.Innovation 2 Post, 2U kit relay rack mount kit is designed to convert the required space.

Startech.com® M6 Mounting screw and cage nut is made of stainless steel. Mounting screw and nut is convenient to have on hand for installing server, network, AV and other rack mount equipment securely into your storage cabinet or server rack..Length: 1/2".Quick shipping direct or from all major distributors and resellers.Stainless steel construction for durability.Square cage nut designed for racks and cabinets with square holes.Included: 1 - 50 pack of M6 cage nuts and cab screws.RoHS compliant.Lifetime limited warranty.Startech.com® M6 Mounting screw and cage nut is designed to mount telecom and A/V equipments server rack/cabinets with square holes.

This server rack provides 18U of storage space in a sleek, secure cabinet for storing standard 19" rack-mount devices such as Dell, HP, and IBM servers, along with telecommunication and A/V equipment. The rack is compatible with EIA-310 compliant equipment and supports a total load capacity of 450 kg (992 lb.).Hassle-free equipment installationThis rack includes a variety of features that enable you to easily incorporate plenty of equipment. With adjustable mounting rails, you can easily change the rail depth from 3" up to 30.7" (76.2 mm - 780 mm) to ensure compatibility your standard rack-mount equipment..Easy rack-mount equipment installation.Keep your rack-mount equipment secure with lockable doors.Keep your equipment at an optimal temperature with passive cooling

The Tripp Lite SR16SHELF 19-inch black 3U rack-mount configurable storage shelf with 15 adjustable and removable plastic dividers accommodates 16 electronic devices. Use it to store your laptops and other similar devices in a wall-mount or floor rack enclosure. It is compatible with all EIA-compliant 19-inch wall-mount and floor rack enclosures and features non-scuff paint to avoid scratches. This easily mountable storage shelf features cable ports with rubber grommets to hold charging cables in place and prevent clutter or tangles..Storage shelf firmly stores up to 16 personal electronic devices in wall-mount or floor rack enclosure.Dimensions: 4.9"H x 18.9"W x 15.8"D, 3U H x 19"W rack.Comes in black color.Perfect for storing tablets, laptops, Chromebooks, Ultrabooks, MacBook Airs and other similar devices.Dividers can easily adjusted to fit devices.Non-scuff paint prevents scratches.Cable ports with rubber grommets holds charging cables securely in place and prevents clutter as well as tangles.Contains 15 x plastic dividers, 8 x M6 screws, 8 x M6 cage nuts, 8 x M6 cup washers and owner's manual.RoHs Compliant.Weight: 11.9 lbs..Comes with 2 years limited warranty

The 4XEM's 2U 19" wall-mounted open rack provides a durable and solid design. The 4XEM 2U open wall-mountable bracket features heavy gauge material to ensure a stable installation platform. The universal standard design is compatible with 19" equipment from popular manufacturers. The 2U open bracket also provides a swing hinge to allow for easy installation of equipment and cabling. It is designed specifically for small businesses, home offices, restaurants, classrooms, and IT professionals..Wall-mounted open bracket in 2U form factor is designed specifically for small business, home offices, restaurants, classrooms, and IT professionals.Dimensions: 3.56"H x 19.72"W x 12.01"D.Made of SPCC cold-rolled steel, comes in black.Meets or exceeds EIA/ECA-310-E standards.Fits 19" equipment from popular manufacturers.Keeps all networking gear organized.Saves space and permits easy access for maintenance.Swing hinge.Cable entry on both sides and rear of rack.Weight capacity: 77.16 lbs..Mounting hole types: square (for cage nut).Weight: 3.97 lbs..Fully assembled.Package contains: a wall-mount rack, 12 M6 screws/washers/nuts, and four wall anchors (concrete).1-year manufacturer limited warranty

This 6U server rack cabinet lets you mount your EIA-310 compliant equipment to the wall. The enclosure features a mounting depth up to 16.9 in. and offers a maximum load capacity of 200 lb. (90 kg). Save space in your office or server room Save valuable floor space, by wall-mounting the enclosure. The wall-mounted design makes this enclosure the ideal solution for optimizing equipment storage in your classroom, retail store, server room or office. This rack also includes a 1U shelf that gives you a stable surface for storing your tools or placing equipment that's not rack-mountable..Save space by wall-mounting your servers or networking equipment.Easily install your equipment with mounting hardware included.Secure your mission-critical equipment with a locked enclosure

The 4XEM's 6U 19" wall-mounted open rack provides a durable and solid design. The 4XEM 6U open wall-mountable bracket features heavy gauge material to ensure a stable installation platform. The universal standard design is compatible with 19" equipment from popular manufacturers. The 6U open bracket also provides a swing hinge to allow for easy installation of equipment and cabling. It is designed specifically for small businesses, home offices, restaurants, classrooms, and IT professionals..Wall-mounted open bracket in 6U form factor is designed specifically for small business, home offices, restaurants, classrooms, and IT professionals.Dimensions: 10.56"H x 19.72"W x 12.01"D.Made of SPCC cold-rolled steel, comes in black.Meets or exceeds EIA/ECA-310-E standards.Fits 19" equipment from popular manufacturers.Keeps all networking gear organized.Saves space and permits easy access for maintenance.Swing hinge.Cable entry on both sides and rear of rack.Weight capacity: 77.16 lbs..Mounting hole types: square (for cage nut).Weight: 10.58 lbs..Fully assembled.Package contains: a wall-mount rack, 12 M6 screws/washers/nuts, and four wall anchors (concrete).1-year manufacturer limited warranty

Innovation® First sliding rack mount shelves include cable management arms and has high quality ball-bearing slide rails. Shelves are compatible with the industry standard 3/8" square hole racks and measures 17.7" x 28" in size..Compatibility: 4 post 19" rack, industry-standard 3/8" square hole racks, dell, HP-Compaq, IBM, APC, all standard round holes, all standard threads including 10-32, 12-24, and metric M6.Works in almost any 19" server rack or relay rack, slide mount servers, desktops and towers.Dimensions: 17.7"(W) x 28"(D).1U (H) x 19"(W) rack.Equipment anti-slide bars front and rear and anti-slip, high-quality ball-bearing slide rails.Includes cable management arms.Includes sliding rack mount shelves, cable management arm.Certifications and standards: EIA-310.Weight: 49.9 kg.Innovation® First sliding rack mount shelves works for almost any 19" server rack or relay rack and is compatible with all standard round non-threaded holes.

This heavy duty rack can be adjusted from 19 1/2-inch to 38inch to fit your rack. It is constructed using 1.0mm SPCC commercial grade cold-rolled steel, providing the ability to hold up to 80kg (175lbs) of equipment..19" 1U.Weight capacity 176 lbs..Frame type Steel.Black.Mounting options Front mount (front only).Supply additional storage space for heavy, mission critical hardware and non-rack mount equipment.Material Steel.Heavy duty server rack shelf provides the ability to hold up to 80kg (175lbs) of equipment.AdjusTable mounting depth brackets make it simple to add a storage shelf to a wide variety of racks or cabinets.Durable steel construction holds up to even the harshest industrial environments.Enclosure thickness 1.2 mm.Rack unit 1U height.Includes rear mounting brackets, 8 - M5 panel screws, 1 x instruction manual.Certifications and standards CE, RoHs.Warranty Lifetime limited.Startech.Com® ADJSHELFHD Server Rack Cabinet Shelf has adjustable mounting depth brackets that make it simple to add a storage shelf to a wide variety of racks or cabinets.

The Cisco 1000 series Integrated Services Routers (ISR 1000 Series) portfolio has been steadily expanding over the years to provide customers with the flexibility they need. The ISR 1000 Series combines routing, switching, Wi-Fi, integrated security, and DSL and LTE uplink connectivity options in a single, lightweight, high-performance device. Choose between the traditional Cisco IOS® XE or controller-managed Cisco IOS XE SD-WAN software to deploy your network quickly and reliably on all Cisco ISR 1000 Series routers. With a simple and flexible pay-as-you-grow model, you purchase network capacity only when you need it..COMPATIBILITY: For use with all Cisco 111X Series Integrated Service Routers.HARDWARE: Includes all necessary hardware to mount the router in a rack or to a wall.SIZE: Rack mount is 1 RU and includes space for the router’s power supply.COMPACT: Cisco 111X Series ISRs are ideal for environments where space, heat dissipation, and low power consumption are critical factors.PEACE OF MIND: 1-year limited warranty

The Juniper® rack mount kit is suitable for use with SRX300 service gateway..Rack mounting kit without adaptor tray.Ideal to mount standard rack mount.Provide solutions for mounting monitors, keyboards and products.Rack mount kit is sold as individually.

2-Post Server Rack Shelf - Center Mount - 19 Inch -2U - Black - Supports up to 75 lb. (34 kg) - Vented (CABSHF2POSTV2).Fits most standard 19" 2 post racks.Mid-mount design.Supports up to 75 lb. (34 kg) of equipment.2 Post Network Rack shelf | Black | 75 lb. (34 kg)

1U Fixed Server Rack Mount Shelf - 16in Deep Steel Universal Cantilever Tray for 19" AV/Network Equipment Rack - 44lbs (CABSHELF116).DURABLE DESIGN: Heavy-duty cantilever shelf tray that is easy to install, constructed of durable 16 gauge SPCC commercial cold-rolled steel with support for weight up to 44 lbs. with lifetime warranty.FLEXIBLE INSTALLATION: The rackmount shelf can be mounted in multiple orientations to enable flexibility when it comes to install methods, w/lips available on one side to prevent equipment sliding off.INSTALLS IN ANY RACK BRAND: The shelf is fully compatible w/ the full array of StarTech.com server/network cabinets & enclosures (4POSTRACK12U, RK2236BKF) & other brands like: HP, APC, Dell & Lenovo.LIFETIME WARRANTY: StarTech.com offers 24 hour technical support & has been the choice of IT professionals for 30 years, conducting thorough compatibility & performance testing on all products.UNIVERSAL COMPATIBILITY: 19" EIA/ECA-310 compliant 1U 16" deep server rack cabinet shelf for universal fit in any existing server/AV rack or cabinet & includes M6 Cage nuts & screws for mounting shelf.Cantilever Rack Shelf | EIA/ECA-310 Compliant | Lifetime Warranty

50 Pack 10-32 Server Rack Cage Nuts and Screws w/Washers - Rack Mount Hardware Kit - Network/IT Equipment Cabinet Clip/Captive Nuts & Bolts for Square Holes - Black - TAA (CABSCREW1032).COMPLIANT WITH INDUSTRY STANDARDS: Clip/Captive nuts & bolts are easy to install and are compatible with virtually any rack & equipment, including HPE, Dell, APC & more.PROFESSIONAL HIGH QUALITY DESIGN: Rack mount hardware kit made from high-quality steel and finished in matte black; includes pre-installed washers to help prevent damage to valuable racks & equipment.STARTECH.COM ADVANTAGE: IT professionals choice for over 30 years; these cage nuts & screws for square holes are backed for 5 yrs. by StarTech.com, including free 24/5 North America based tech support.TAA COMPLIANT 10-32 CAGE NUTS & SCREWS: 50 pack of server rack cage nuts and screws uses 10-32 threads (imperial measurements) and comes with an installation tool.TECH SPECS: 50x Cage Nuts | 50x Screws | 10-32 Thread | Steel | Matte Black Finish | Cage Nut Installation Tool Included.Rack Mount Cage Nuts and Screws | 10-32 | Black

The 4XEM's 3U 19" wall-mounted open rack provides a durable and solid design. The 4XEM 3U open wall-mountable bracket features heavy gauge material to ensure a stable installation platform. The universal standard design is compatible with 19" equipment from popular manufacturers. The 3U open bracket also provides a swing hinge to allow for easy installation of equipment and cabling. It is designed specifically for small businesses, home offices, restaurants, classrooms, and IT professionals..Wall-mounted open bracket in 3U form factor is designed specifically for small business, home offices, restaurants, classrooms, and IT professionals.Dimensions: 5.31"H x 19.72"W x 12.01"D.Made of SPCC cold-rolled steel, comes in black.Meets or exceeds EIA/ECA-310-E standards.Fits 19" equipment from popular manufacturers.Keeps all networking gear organized.Saves space and permits easy access for maintenance.Swing hinge.Cable entry on both sides and rear of rack.Weight capacity: 77.16 lbs..Mounting hole types: square (for cage nut).Weight: 5.51 lbs..Fully assembled.Package contains: a wall-mount rack, 12 M6 screws/washers/nuts, and four wall anchors (concrete).1-year manufacturer limited warranty

SEH RMK3 rack mount kit for a perfect and safe storage of your dongleserver ProMAX. Using the rack mount kit, you can install the dongleserver ProMAX into 19" server racks. The extendable telescopic slides allows easy access to the unit..Rack mount kit to install the dongle server ProMAX into 19" server racks.Rack size: 19".Safely store your dongleserver ProMAX

The dongleserver Pro provides secure and reliable access to software license dongles via a network. It has four USB 3.0 SuperSpeed and four USB 2.0 Hi-Speed ports. The handy version of the dongle server has been designed for use in office environments. The lockable housing keeps your valuable USB dongles safe in accessible areas. With the optional rack mount kit, the dongle server can be installed in the server room as well. With the dongleserver Pro by SEH, dongles cannot only be used via LAN connections but also via VPN, VLAN, and the Internet. This allows for access from the most diverse environments — the potential application scenarios are endless!.Thish rack-mount server provides secure and reliable access to software license dongles via a network.SD card for automatic configuration backup and transfer to other devices.Dimensions: 8.46"W x 1.77"H x 6.1D.Contains 1 × 10BaseT/100BaseTX/1000BaseT (IEEE 802.3), 8 x USB ports: 4 × USB 3.0 ports (SuperSpeed), 4 × USB 2.0 ports (Hi-Speed).Configuration and management requirements: Microsoft Windows, Linux, OS X/mac OS.Includes two installed power supplies and two network connections to ensure maximum reliability.Meets or exceeds CE: EN55024:2010 + A1:2015, EN55032:2015 class B; IFCC: Part 15, subpart B, class B;RoHS (EN50581:2012) standards.Provides IPv6 full support, simplified configuration and administration (monitoring and logging with connection to monitoring server services, manage access rights individually, securing of local event log on remote WebDAV server).Save time and costs: USB dongles are safe from loss, theft, wear and tear, and damage.Virtual USB cable extension via the network for the flexible and independent use of up to eight USB dongles.Provides a direct, safe point-to-point connection via the network, SSL/TLS encryption, access protection and many more security features protect USB dongles from unauthorized access.Dongles can be assigned to different users, departments, customers etc..Can be installed in the server room as well.Features status display and acoustic warnings.Suitable for legal and professional offices, small to medium-sized companies, educational institutions such as universities and schools, virtual network environments, scientific institutions such as research facilities

This adjustable rackmount shelving system supports 1U UPS systems as well as other 1U pieces of networking or power protection equipment. It offers a 4-post expandable mounting rails in the front to rear support for equipment with 17 1/2-inch wide rectangular chassis..Dimensions 1.72"(H) x 1.49"(W) x 20 1 2"(L).Weight capacity Up to 150 lbs..Silver.Maximum adjustable depth 36".Adjustable to any length between 20 1 2" and 36".Square hole rack attachment hardware included.Includes left rail pieces - a front and a rear, right rail pieces - a front and a rear, 10 - M6 screws, 10 - M6 washers, installation guide.Warranty 5 years limited.Tripp Lite SmartRack™ 4POSTRAILKit1U Rack Mount comes with rails that can be adjusted to any setting between 20.5" and 36".

The centered rack shelf can hold up to 200 lbs. (91 kg) of equipment and is constructed using 1/16 in (1.5 mm) thick SPCC commercial-grade cold-rolled steel for long-term durability and sturdiness. Accommodate your accessories or non-mountable devices for ease of access or connectivity to your equipment. Conveniently includes M6 square cage nuts and M6 screws to set it up in no time. The SHELF-2U-20-CENTER-V is backed by a StarTech.com lifetime warranty and free lifetime technical support..UNIVERSAL 19'' FIT: This 2U center-mounted vented server rack shelf is designed to fit 2-post EIA-310 compliant 19 in server racks and can accommodate an internal depth of 20in (50.8 cm) for your data, IT, networking, or other non-rack mountable equipment.CENTER MOUNT SHELF: The center-mount design allows for easy access to the front and back of the equipment, allowing for simple installation, maintenance and cable routing.DURABLE DESIGN: Constructed with 1/16 in (1.5 mm) thick SPCC commercial cold-rolled steel, the sturdy rack shelf ensures long term durability and supports a total weight of 200 lbs. (91 kg) making it the perfect rack shelf for any environment.MAXIMIZE VENTILATION: The vented shelf plate on the cantilever rack shelf helps to improve airflow to effectively dissipate heat away from your equipment.STARTECH.COM ADVANTAGE: IT professionals’ choice for over 30 years, this 2U vented server rack shelf is backed for life by StarTech.com, including free lifetime 24/5 multi-lingual technical assistance.The SHELF-2U-20-CENTER-V lets you add 2U 20 inches (50.8 cm) deep shelf to any 2-post EIA-310 compliant 19-inch rack.