SATA Cards
2 results
This four-port SATA III (6Gbps) controller enables you to add four SATA 6Gbps hard drives (HDDs) or Solid State Drives (SSDs) to your computer system or server via an available PCIe x2 card slot. The card supports SATA III and PCI-Express 3.0 specifications..Add four SATA III 6Gbps ports to your desktop computer or server using a PCIe x2 slot to connect SATA drives (HDD/SSD).Enables the connection of four high-performance SATA 6Gbps drives with a combined total throughput of up to 16Gbps.The SATA drives are connected via four individual SATA ports located on the card (SATA cables sold separately).Widely supported across all popular operating system platforms including Windows (7, 8, 10, 11), macOS (10.10 and above) and Linux (2.6.32 and above).Supports port multiplier, giving you the ability to connect multiple drives to a single SATA port (additional hardware required, sold separately).Features plug-and-play installation and can be installed in a full-profile or low-profile computer systems with the full-profile bracket preinstalled, and an interchangeable low-profile (half-height) bracket included.Manage your drives and built RAID arrays with storage management systems such as Storage Spaces (Microsoft), RAID Assistant (macOS), mdraid/mdadm (Linux).2-year manufacturer limited warranty
StarTech eight-port SATA III (6Gbps) controller enables you to add eight SATA 6Gbps hard drives (HDDs) or solid State Drives (SSDs) to your computer system or server via an available PCIe x4 card slot. The card supports SATA III and PCI-Express Gen 2 Specifications and four SATA controllers to deliver a high-performance data storage solution..PCI Express SATA expansion adapter card with four host controllers.Maximum data transfer rate is 6Gbps.Card type: standard profile (LP bracket incl.) with eight ports; internal ports: SFF-8087 (36 Pin, Internal Mini-SAS).OS compatibility: Windows 7, 8, 8.1, 10; Windows Server 2003, 2008 R2, 2012, 2012 R2, 2016, 2019; macOS 10.10 to 12; Linux 2.6.32 and up.2-year manufacturer limited warranty
You May Also Like
The PEXUSB3S4V PCI express USB 3.0 Card (with SATA power) adds 4 external USB 3.0 ports to any PCI express-enabled computer system..PCI Express x1.Plug-in Card.4 USB Port(s).Form factor: Low profile plug in card.Platform supported: PC.Number of ports: 4.Operating systems: Windows XP (32/64 bit), Server 2003 (32/64 bit), Server 2008 R2, vista (32/64 bit), 7, (32/64 bit), 8 (32/64 bit).Card type: Standard profile.Chipset ID: NEC uPD720201.Connector type: 1 - PCI express x 1 male.Operating temperature: 5 to 50 deg C.Dimensions: 2.7"(H) x 0.7"(W) x 3"(L), 700 mil thickness.Internal ports: 1 - SATA power (15 pin) plug, external ports: 4 - USB 3.0 A (9 pin, superspeed) female.Optionally provides up to 900mA per USB port.Backward compatible with USB 2.0 and USB 1.0/1.1 devices.System and cable requirements: PCI express expansion slot.Package contents: 1 x PCI express USB 3.0 card, 1 x low profile bracket, 1 x driver CD, 1 x instruction manual.Weight: 1.6 oz..Certification and standards: Green compliant, ROHS, CE, FCC.Warranty: 2 years limited.StarTech.com Four-Port PCIe USB 3.0 Adapter Card - High Speed, Low Profile
StarTech.comĀ® Video card power cable adapter is 6" long and has high quality material construction for durability and offers greater flexibility. Adapter has two 15-pin SATA power male plug and one 8-pin female PCI express power connector for optimum performance. 18 AWG thicker wire gauge construction ensures high power handling capability. Adapter has gold-plated SATA connectors to ensure clean and clear data signal transmission across the network. Easily converts serial ATA power supply connector to PCIe connector. You can avoid upgrading your existing SATA power supply in order to use a PCI Express video card..Adapter card is well suited for connecting a PCIe video card to Serial ATA power connectors provided by the computer power supply.A convenient length of 6" for ease of installation.Uses 2 x 15 pin SATA male first end and 1 x 6 pin PCI E female second end connectors for clear transmission.Comprises of PVC jacket for added safety against over-flow of current.Measures 0.5"H x 1.2"W x 5.9"L.Features gold plated connector for easy data signal transmission across the network.Helps to eliminate the need to upgrade your existing SATA power supply in order to use a PCI Express video card.Easily converts two serial ATA power supply connectors to one PCIe connector for durable use.Has 18 AWG thicker wire gauge construction to ensures high power handling capability.Well designed to use with PCI express video card.Contains 6" SATA power to 6 pin PCI express video card power cable adapter.Meets RoHS standards.Weighs 0.6 oz.Comes with lifetime warranty.StarTech.comĀ® SATPCIEX8ADP 6" Adapter cord with SATA and 8-pin PCI-E connectivity allows to connect a PCIe video card to a power supply. 18 AWG Cord offers reliable performance.
StarTech.comĀ® Server network adapter card features two RJ-45 female Ethernet ports and offers full duplex support. Card offers a data transfer rate of 2000 Mbps for full-duplex transmission and 1000 Mbps for half-duplex transmission..Dimensions: 4.7"(H) x 0.7"(W) x 3.6"(L).Chipset ID: Realtek - RTL8111E, Asmedia - ASM1182E.Host interface: PCI-Express x1, Network technology: 10/100/1000Base-T- Gigabit Ethernet, Maximum data transfer rate: 2000 Mbps (full-duplex), 1000 Mbps (half-duplex).Interface/ports: 2 x RJ-45 network, Connector type: 1x PCI-Express x1 male.Form factor: Plug-in card.Device supported: Server.Performance: Auto MDIX, full-duplex support, Jumbo frame support: 9K max.Supported protocols: IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding and IEEE 802.3x full-duplex flow control.Card type: Standard Profile (LP bracket included), Port style: Integrated on card, Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, PCI express base specification 2.0.Optional low-profile/half-height bracket that can be used for installation into a standard or small form-factor computer chassis.Indicators: LED: 2 - Green - Link/Activity, 2 - Yellow - Gigabit Mode.Software: OS Compatibility: WindowsĀ® 8.1 / 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000 WindowsĀ® Server 2012, 2008 R2, 2003(32/64), Mac OS 10.4 and up, Linux 2.4.x and up.System and cable requirements: Available PCI-Express slot.Environmental: Temperature: Operating: 0 deg C to 70 deg C (32 deg F to 158 deg F), Storage: 0 deg C to 100 deg C (32 deg F to 212 deg F), Humidity: 10 approx. 90% RH.Includes 1 x PCIe network card, 1 x low-profile bracket, 1 x driver CD, 1 x instruction manual.Weight: 1.8 oz..Warranty: 2 years limited.StarTech.comĀ® Server network adapter card contains two Ethernet ports and has a PCI express slot that allows you to connect it to client, server or a workstation.
This quad-port 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity across four 2.5G ethernet connections. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..Network controller to add a up to four 2.5GbE ports to a PCI Express (PCIe) 2.0 (or higher) slot in your workstation.Has a four RJ-45 ports.Compatible with Windows, Windows Server, VMware, and Linux systems.Meets or exceeds WEEE standards.Leverages Intel vPro technology for remote management and troubleshooting capabilities.Intel I225-V chipset allows for improved bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and streaming of online content, while reducing network slowdowns.Card ships in a standard-profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty
4-Port USB PCIe Card - 10Gbps USB 3.1/3.2 Gen 2 Type-A PCI Express Expansion Card with 2 Controllers - 4x USB-A - USB PCIe Add-On Adapter Card - Windows/Mac/Linux (PEXUSB314A2V2).COMPATIBILITY: USB PCIe adapter card for desktop PC installs in standard profile PCI-e 2.0 x4 slot; Supports Windows/Linux/macOS with auto driver install on Windows 8 & up; Works w/USB 3.0/2.0 devices.HIGH PERFORMANCE: USB PCIe card with 4x USB-A ports up to SuperSpeed 10Gbps per port; Dual ASM3142 controllers with up to 20Gbps total bandwidth across 4 ports; USB 3.1 Gen 2/USB 3.2 Gen 2x1; Upgraded version of our popular USB card PEXUSB314A2V.MAXIMIZED USB PERFORMANCE: Multiple INs support for max bandwidth when using mixed-speed devices; USB Attached SCSI Protocol (UASP) for storage device, like SSDs, HDDs, NVMe drives and thumb drives.POWER: USB PCI Express expansion card with SATA power header has the option to provide supplemental power to the USB ports (if motherboard power is insufficient) providing up to 4.5W ([email protected]) per USB-A port.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years; This USB-A PCIe add-on card is backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.USB 3.2 Gen 2 (10 Gbps) | PCI-Express 3.0 | PCIe x4 Slot | USB Type-A
Add up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in an IT Administrator workstation or server backplane, using this 2-Port SFP Network Controller. The network controller features an Intel I350 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and IntelĀ® VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps per port.Has two SFP slots.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I310 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slots for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty
2-Port USB PCIe Card with 10Gbps/port - USB 3.1/3.2 Gen 2 Type-A PCI Express 3.0 x2 Host Controller Expansion Card - Add-On Adapter Card - Full/Low Profile - Windows & Linux (PEXUSB312A3).COMPATIBILITY: USB PCIe adapter card installs in full or low-profile PCIe 3.0 x4 slot and up; Bracket included; Backward compatible w/ PCIe 2.0; Supports Win/Linux/macOS w/auto drivers on Win 8 & up.HIGH PERFORMANCE: 2-Port USB PCIe Card with ASMedia ASM3142 host controller (PCIe 3.0 x4) has two SuperSpeed 10Gbps USB-A ports (USB 3.1 Gen 2 / USB 3.2 Gen 2x1); Speeds up to 10Gbps/port; Upgraded version of our popular USB card PEXUSB312A2.MAXIMIZED USB PERFORMANCE: Add-on card supports Multiple Ins for max bandwidth when using mixed-speed devices; Supports UASP & optimized for SSDs/HDDs, NVMe, thumb drives; Supports USB 3.0/2.0 devices.POWER: USB PCI Express 3.0 expansion card w/ SATA power header supplies supplemental power to the USB ports (when motherboard power is insufficient) providing up to 4.5W (5V @ 0.9A) per USB-A port.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years; This USB-A PCI-e card for desktop is backed for life by StarTech.com, incl. free 24/5 North America based multi-lingual tech support.USB 3.2 Gen 2 (10 Gbps) | PCI-Express 3.0 | PCIe x2 Slot | USB Type-A
This dual-port 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity across two 2.5G ethernet connections. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..Network controller to add a up to two 2.5GbE ports to a PCI Express (PCIe) 2.0 (or higher) slot in your workstation.Has a two RJ-45 ports.Compatible with Windows, Windows Server, VMware, and Linux systems.Meets or exceeds WEEE standards.Leverages Intel vPro technology for remote management and troubleshooting capabilities.Intel I225-V chipset allows for improved bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and streaming of online content, while reducing network slowdowns.Card ships in a standard-profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty
StarTech.comĀ® PEXUSB3S11 Express card features USB 3.0 connection that provides benefit of compatibility with USB 3.0-based internal storage solutions. Transfers data at the rate of up to 5 Gb/s. Enable high speed USB communication between your PC and any USB 3.0 enabled external device. Offers reliable, fast, hot-swappable, connectivity solution for backups and data archiving for desktop and server. PCIE USB 3.0 card includes an optional SATA power connector to connect to your system power supply and deliver up to 900mA of power per port. The 2 port card operates at a temperature of 0 DegC to 50 DegC and stores at temperature of -20 DegC to 60 DegC. Works with UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously..USB PCI express card offers high performance.Measures 0.8" x 4.7" x 2.8".Has USB 3.0 connection for added convenience.Compatible with WindowsĀ® 8 (32/64bit)/7 (32/34)/Vista (32/64)/XP (32/64), Server 2008 R2, 2003.Features PCI express Bus type and standard profile card type for reliable operation.1 x PCI express male, 1 x USB 3.0 A (9 pin, superspeed) female (external) connection and 1 x SATA power (15 pin) plug for reliable operation.Backward compatible with previous USB standards, USB ports are hot swapping and plug-and-play compliant.Optional SATA power connector for up to 900 mA per port output.Supports Control/bulk/interrupt/isochronous transfer USB communication types.Plug-in card form factor for convenience.Operates at 32 -122 deg F temperature.Meets Green Compliant, RoHS, CE, FCC certification and standards.Contains 1 x PCI express USB 3.0 card, 1 x low profile bracket, 1 x driver CD and 1 x instruction manual.Weighs 1.4 oz.Comes with lifetime limited warranty.StarTech.comĀ® Express card offers both internal and external USB 3.0 connections. Compatible with Windows 8 and Windows 7 OS.
2-Port 10Gbps USB-A & USB-C PCIe Card - USB 3.1 Gen 2 PCI Express Type C/A Host Controller Card Adapter - USB 3.2 Gen 2x1 PCIe Expansion Add-On Card - Windows, macOS, Linux (PEXUSB311AC3).COMPATIBILITY: Installs in full or low-profile PCIe 3.0 x4 desktop/server slot (lower performance w/PCI-e 2.0); Windows/Linux/macOS auto driver install (Windows 8 & up); Works with USB 3.2/3.1/3.0/2.0.HIGH PERFORMANCE: USB 3.1 Gen 2 or USB 3.2 Gen 2x1 PCIe Add-On card supports Multiple INs, maintains max bandwidth even when mixed speed devices are connected; 10Gbps per port; 1x USB-A & 1x USB-C | Upgraded version of our popular card PEXUSB311AC2.MAX PERFORMANCE WITH USB DEVICES: 2-port USB-A & USB-C PCIe card adapter supports USB Attached SCSI Protocol (UASP) optimizing USB performance w/ external storage devices like SSDs, HDDs, NVMe drives.POWER: Expansion card w/ SATA power supplies supplemental power to the USB ports (when motherboard power is insufficient) providing up to 5V 3A/15W via the USB-C port & 5V 0.9A/4.5W via the USB-A port.THE STARTECH.COM ADVANTAGE: StarTech.com offers a 2-year warranty & free lifetime 24 hour support on thisĀ dual port USB-A & USB-C PCI Express Host Controller card w/ full & low profile bracket incl..PCIe 3.0 | USB Type-C & USB Type-A | 5V 3A/15W via USB-C | 5V 0.9A/4.5W via USB-A | UASP
Running low on expansion slots? Merge USB 3.0 and GbE into a single PCIe combo card - 3 Port PCI Express USB 3.0 Card + Gigabit Ethernet - Installation flexibility to fit standard & low-profile PCs - Frees up a PCIe slot by consolidating 3x USB 3.0 & 1x Gigabit Ethernet into a single card - UASP Support - Optional SATA Power - Save money and connect existing devices with USB 2.0 and 1.x backward compatibility - USB 3 with Network Adapter Card.Frees up a PCIe slot by consolidating 3x USB 3.0 & 1x Gigabit Ethernet ports into a single card.Provides installation flexability for standard and low-profile computers, with a dual-profile design.Lets you save money and connect your existing devices with USB 2.0 and 1.x backward compatibility.Perfect for high-powered USB devices, with optional SATA power providing up to 900mA per port.PCIe x1 interface, compliant with PCI Express 2.0 specifications.Supports Wake-On-LAN, Energy-Efficient Ethernet, jumbo frames, full duplex flow control, VLAN tagging, and layer 2 priority encoding
Startech.comĀ® 40-Pin IDE PATA to SATA adapter converter provides ODD support which allows you to add Blu-ray, DVD or CD-ROM drives to an older IDE motherboard. Converter provides support for 48-bit logical block addressing..Hard drive accessory type: IDE to SATA adapter converter.Red.Dimensions: 0.9"(H) x 0.8"(W).Chipset ID: Marvell 88SA8852.Connector type: 1 x IDE (40 Pin, EIDE/PATA), 1 x SATA data and power combo (7+15 pin), 1 x SP4 (4 pin small drive power).Maximum data transfer rate: 133 Mbps.Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection.Hassle free installation, with no software CD required.Support for 48-bit logical block addressing.Compliant with SATA revision 1.0 specification, compatible with Ultra ATA 133 specification.Supports 2 1/2", 3 1/2", and 5 1/4" SATA drives.Internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface.Ideal for use with older motherboards that do not support SATA.Compatibility: Blu-ray drive, DVD drive, CD-ROM drive.Environmental info: 5 - 50 Deg C operating temperature, 15 - 90% relative humidity.System requirements: An IDE controller and ATA cable.Certifications and standards: FCC, RoHS.Includes 40-pin IDE PATA to SATA adapter converter for HDD/SSD/ODD, 1 x LP4 Molex to SP4 power cable, 1 x instruction manual.Warranty: 2 years limited.Startech.comĀ® 40-Pin IDE PATA to SATA adapter converter helps to connect a SATA device to an IDE/ATA motherboard and is ideal for use with older motherboards that do not support SATA.
Startech.comĀ® RAID control card balance the performance of SSD storage with the cost-effectiveness and large capacity of standard hard drives. Control card supports port multiplier that connects multiple SATA drives to one port over a single cable..Interface: SATA.Data transfer rate: 6 Gbps.Ports: 4.Bus type: PCI express.Card type: Standard profile, LBA support: 48 bit.Port style: Integrated on card.Host interface: 2 x PCI express 2.0.Internal ports: 4 - SATA (7 pin, data) plug, controller type: serial ATA/600.RAID levels: JBOD, 1, 0, 1+0.Number of ports: 4 (SATA).Form factor: Plug-in card.HyperDu technology offers SSD auto-tiering which lets you balance the performance advantages of SSD storage with the cost-effectiveness and large capacity of standard hard drives.Maximum drive capacity: Up to 4TB per drive.Dimensions: 2.8inch(H) x 4.7inch(W) x 0.8inch(T).Software: OS compatibility: Windows XP (32/64-bit)/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8 (32/64-bit), Mac OS 10.6 /10.7 /10.8, Linux.Platform supported: PC, Mac.Environmental conditions: 5 - 50 Deg C operating temperature, 20 - 80% humidity.Requirements: Available PCI express x2 slot (backward compatible with x4, x8, and x16 slots).Package contents: PCIe SATA controller card, low profile bracket, driver CD, instruction manual.Warranty: 2 years limited.Startech.comĀ® RAID control card can be connected to a computer through a PCI Express x2 slot to provide multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives.
Here's a fast, easy way to access data on a 2.5" solid-state or hard drive. This cable-style adapter lets you connect your laptop or desktop computer directly to a solid-state drive and access it through ultra-fast USB 3.1 Gen. 2 (up to 10 Gbps). With the adapter cable, you can quickly swap hard drives without having to install your drives into an enclosure. You can copy or retrieve data from a 2.5" SSD/HDD quickly with no additional accessories required. It gives you easy drive access for data migration, drive cloning and data backup applications, with the fast performance of USB 3.1 Gen 2. USB 3.1 Gen 2 gives you greater bandwidth and speed with rates of up to 10 Gbps - twice the speed of USB 3.0 (USB 3.1 Gen 1) technology. It lets you leverage the high performance of the latest SSDs and hard drives, while alleviating bottlenecks in your data transfers. This cable-style adapter features a compact, lightweight design that tucks easily into a laptop bag or carrying case. Use it wherever you go to access valuable data quickly - with no external power required..QUICKLY ACCESS A SATA SSD OR HDD: This USB 3.1 to SATA cable delivers instant access to your 2.5" SATA drives from your laptop or computer; The adapter is compatible with SATA I, II and III (up to 6Gbps) NOTE: Supports 2.5" SATA drives only. For 3.5" drives please see our USB312SAT3.FAST TRANSFER SPEEDS & UASP SUPPORT: The SATA hard drive adapter cable lets users experience enhanced performance and super-fast data transfer speeds with support for USB 3.1 (10Gbps) and UASP.CONNECT FROM ANYWHERE: The external HDD / SSD storage converter delivers perfect portability, tucking away nicely in a laptop bag; The cable-style adapter is USB-powered so no external power cords are required.1 x SATA/Power.PLUG-AND-PLAY: Access any 2.5" hard drive or solid-state drive from any USB enabled computer by simply plugging in the SATA adapter cable; you can easily swap between drives with no need to install the drive inside an enclosure.Black.Connect a 2.5" SATA SSD/HDD to your computer using this USB 3.1 Gen 2 ultra-portable cable
This 2.5GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..One-port 2.5Gbps NBASE-T PCIe network card with Intel I225-V chip.Provides Ethernet speeds up to 2.5Gbps.Has a one RJ-45 port.OS compatibility: Windows 10, 11, Windows Server 2019, 2022, Linux 5.8.x and up (LTS versions only), and VMware ESXi 7.0.Meets or exceeds the RoHS, and WEEE standards.The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities.The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.LAN card features built-in heat sink to keep the controller chip cool for optimal performance.Includes PCIe network card, low-profile bracket, and quick-start guide.2-year manufacturer limited warranty
Dual M.2 PCIe SSD Adapter Card, x8 / x16 Dual NVMe or AHCI M.2 SSD to PCI Express 4.0, Up to 7.8GBps/Drive, For 2242/2260/2280/22110mm PCIe M-Key M2 SSDs, Bifurcation Required - PC/Linux Compatible.This Dual M.2 PCIe SSD Adapter enables you to install 2x PCIe M.2 SSDs (NVMe or AHCI) into a computer through an available x8/x16 PCI Express 4.0 slot | Read and write speeds up to 7.8GBps per drive.PCIe Bifurcation support is required by the Computer/Motherboard | Compatible with PCIe 3.0 x8 or x16 slots | Windows/Linux.Access the M.2 PCIe SSDs individually | Software RAID support for RAID 0/RAID 1/JBOD.Vented full-profile bracket pre-installed and low-profile bracket included.Dual M.2 NVMe / AHCI | PCIe 4.0 x8 or x16 Slot | Bifurcation