SFP GBIC Modules

Cisco™ 100Base-X small form-factor pluggable is optically interoperable with respective 100Base-X ethernet that interfaces on the same link. Plug has max transfer distance of 32810' and optical wave length of 1310 nm..1 x LC duplex 100Base-LX10.Optically interoperable with respective 100Base-X Ethernet interfaces on the same link.Connectivity technology: Wired.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D), Form factor: Hot swappable.Max transfer distance: 32810', Optical wave length: 1310 nm.Temperature: 32 -122 deg F operating.Data transfer rate: 100Mbps fast ethernet, Connectivity media: G.652 micrometer single mode optical fiber.Compatibility: Catalyst 2960, 2960-24, 2960-48, 2960G-24, 2960G-48, 2960S-24, 2960S-48, 3560, 3560-12.Application/usage: Data networking.Interchangeable with other 100BASE-X SFPs on the same line card.Certification and Standards: IEEE 802.3, IEEE 802.3ah.Cisco™ 100BASE-LX10 SFP XCVR module is a pluggable device that operates on ordinary multimode fiber-optic link and is a hot-swappable input/output device that plugs into fast ethernet ports.

The StarTech® SFP10GLRST 10 Gigabit fiber LC SFP+ transceiver module offers reliable 10 Gigabit Ethernet connections for 10GBase-LR compliant networks. This Gigabit SFP+ module ensures maximum performance and easily installs into Cisco® switches. This transceiver module measures 2.2" x 0.5" x 0.5" and is compatible with 10 Gigabit fiber networking equipment as well as media converters. It has aluminum construction with zinc-plated casing enclosure for added protection. It has LC duplex 10GBase-LR network port for connectivity and supports single-mode optical fiber media to transfer data at 10 Gbps up to a distance of 10 km..100% compatibility with Cisco SFP-10G-LR guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.3 W.Hot-swappable with fiber-optic modules

This Intel adapter has one 10GBASE-SR port for your device and offers speeds of up to 10 Gbps, so you can transfer data quickly. The plug-in card is easy to install, and it is hot swappable, so you don't need to restart your computer when you're going to.Interface: 1 x 10GBase-SR.Network adapter speed: Up to 10 Gb/s.Form factor: Plug in card.Ports: 1 x LC.Operating temperature: 0 - 70 deg C.Transmission distance up to 300 m.Application/usage: Optical network, data networking.Hot-swappable.Sub watt power consumption: 0.65 W.3 years limited warranty.Intel Adapter - Networking and Network Adapters

The Dell™ SFP+ optical transceiver with 10GBase-LR network technology, offers 10GbE connectivity up to 10 km distance. It works on Gigabit Ethernet technology for data networking applications. This hot-pluggable transceiver featuring SFP footprint, features a unique digital diagnostic monitoring interface for real-time access to device operating parameters. The transceiver with a duplex LC connector, is compatible with select Dell networking N4000 series and N-series systems..Transceiver module for data and optical networking applications.Port: 10GBase-LR: 10 Gb/s, up to 6.2 miles.Connectivity media: Single-mode optical fiber.Plug-in module form factor.Optical wavelength: 1310 nm.Dell Networking transceiver module features 10GBase-LR port, 10 Gbps, upto 6.2 miles.

At Aruba, we believe that the most dynamic customer experiences happen at the edge. Our mission is to deliver innovative solutions that harness data at the edge to drive powerful business outcomes. Aruba is where top athletes in every field are advancing the future of mobile and digital. At our core is a customer first, customer last philosophy. We focus on Innovation that is revolutionizing digital experiences in places where we work, learn, shop, travel, and enjoy free time. We are the biggest small company in our industry. Our mission is to be the Edge-to-Cloud platform upon which our customers innovate in the mobile, IoT, and cloud era..Four-port 10GbE SFP+ module is an accessory for the Aruba 3810M.Contains four 10GbE SFP+ ports.Dimensions: 2.92"H x 5.15"W x 1.09"D.Product weight is 0.38 lbs..Contains SFP+ module.Weight: 0.37 lbs.

HPE is the global edge-to-cloud company built to transform your business. How? By helping you connect, protect, analyze, and act on all your data and applications wherever they live, from edge to cloud, so you can turn insights into outcomes at the speed required to thrive in today's complex world..This short range, fibre channel, SFP28 transceiver is designed for HPE MSA storage.Supports up to 25 Gbps of data transfer rate.Four transceivers per pack.Dimensions: 8"H x 0.21"W x 3"D

The StarTech® GLCSXMMDSTT SFP network transceiver module supports fiber optic network connectivity using GbE technology. This transceiver module provides 1000Base-SX network connectivity for data networking and optical network applications. It transfers the data over optical multi-mode fiber with a maximum reach of up to 550 m, at a wavelength of 850 nm using LC female duplex connector. This easy to install transceiver is compatible with Cisco modules. The transfer module features digital optical monitoring (DOM) support that allows you to access real time operating parameter..100% compatibility with Cisco GLC-SX-MMD guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1 W.Hot-swappable with fiber-optic modules

The StarTech.com® GLCTST hot-pluggable SFP transceiver ensures a reliable GbE connection up to 100 m using RJ-45 connector. This transceiver offers port flexibility to match your changing needs over time, from copper to fiber..Hot-pluggable transceiver provides reliable and cost effective GbE connection using RJ-45 connector.Dimensions: 0.6"H x 0.5"W x 2.7"D.Comes in silver color with aluminum enclosure.Interfaces/port: 1 x RJ-45 female.Ethernet technology: Gigabit Ethernet.Media type supported: Twisted pair.Maximum data transfer rate: 1 Gbps.Operating range: 100 m.Compatible with Mini-GBIC fiber (MM or SM) and copper (RJ45) slots (NICS, fiber media converters).Ideal for use in switches, routers and other networking equipment, SFP allows to expand your network to remote segments cost-effectively.It provides a versatile and convenient solution that is compatible with a multitude of multi and single-port Gigabit Ethernet networking devices.Meets RoHS, WEEE standards.Weight: 0.9 oz..Comes with lifetime warranty

The Transition Networks TN-GLC-FE-100FX small form factor pluggable (SFP) Transceiver modules is designed to install in any SFP port allowing for 100Base-FX interfaces to the network through the SFP connector..Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100 Mbps for connectivity.With 100Base-FX technology, enjoy up to 100 Mbps data transfer rate over optical fiber cable

Add reliable and cost-effective Gigabit Ethernet connections over copper, with this SFP module. This 1000Base-TX SFP module delivers what you need most in your network connections: reliable performance. It's built to exacting MSA specifications and fully tested to ensure seamless compatibility. The RJ45 copper SFP transceiver module offers a cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Delivers Gigabit Ethernet connections With data transfer rates of up to 1Gbps, this SFP module can be installed into networking equipment with an MSA compliant port and RJ45 copper interface. It delivers dependable Gigabit connectivity over copper cable for 1000Base-TX compliant networks, with a maximum distance of up to 100 m (328 ft.)..Delivers reliable RJ45 Gigabit Ethernet connections for 1000Base-TX compliant networks.Meets or exceeds MSA (Multi-Source Agreement) industry standards.Backed by lifetime warranty and free lifetime technical support

AddOn® 1000BASE-SX 850nm 550m MMF SFP Module is built to meet or exceed the OEM's specifications and supports optical networking. Module can be deployed with 3rd party transceivers for seamless network performance and features MMC connectivity..Interface/ports: 1 x LC 1000Base-SX network.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Compatibility: Catalyst Express 500, Catalyst Express 520, ME 3400, ME 3600X, ME 3800X, ME 4900 Series, Catalyst 2940, 2950, 2960, 2960-S, 2960-C, 2970, 2975, 3560, 3560-E, 3560-X, 3560-C, 3750, 3750-E, 3750-X Series.Connectivity technology: Wired.Form factor: Hot-swappable.Connectivity media: Multi-mode optical fiber 1000Base-SX.Max transfer distance: 550m.Data transfer rate: 1 Gbps gigabit Ethernet.850 nm.Environmental condition: Operating temperature: -5 - 85 deg C.Distance up to 550m with 62.5/125microm MMF.Singer 3.3 V Power supply and TTL Logic interface.Duplex LC connector interface.Digital diagnostic monitor interface compatible with SFF-8472.Warranty: Lifetime limited.AddOn® 1000BASE-SX 850nm 550m MMF SFP Module is supported with DOM to access real-time operating parameters and is hot swappable.

AddOn® SFP+ Module can be mixed with 3rd party transceivers for outstanding network performance. Module operates at 1310 nm over multi-mode fiber with a maximum reach of 220 m connected through a LC connector..Interface/ports: 1 x LC duplex 10GBase-LRM network.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Compatibility: Catalyst 2360, catalyst 3100 blade switches, Nexus 7000, catalyst 2960-S, catalyst 3560-E, catalyst 3560-X, catalyst 3750-E. catalyst 3750-X, catalyst 4500, catalyst 4900, ME 4900, catalyst 6500.Connectivity technology: Wired.Form factor: Hot-swappable.Connectivity media: Multi-mode optical fiber 10GBase-LRM.Max transfer distance: 720 ft.Data transfer rate: 10.30 Gbps gigabit Ethernet.1310nm.Environmental condition: Operating temperature: 0 - +70 deg C.Multi-rate compliance for ethernet and fiber channel.Sub watt power consumption: 0.65W (typ.).Multipurpose multi-rate optical transceiver module for transmission at 1310nm over multimode fiber.Its sub watt power consumption and its excellent EMI performance allow system design with high port density.Warranty: 3 years limited.AddOn® SFP+ Module is built to meet or exceed the OEM's specifications and features 10GBase-LRM interface.

Intel’s family of Intel® Ethernet X520 server adapters with SFP+ connectivity are the most flexible and scalable Ethernet adapters for today’s demanding data center environments..Interface: 1 x 10GBase-SR.Network adapter speed: Up to 10 Gb/s.Form factor: Plug in card.Ports: 1 x LC.Connectivity media: Fiber 10Gbase-LR.Intel Ethernet server adapter X520 series.Optical wave length: 1310 nm.Media & performance.Lifetime limited warranty.Ethernet SFP+ LR optics is designed for the Intel ethernet converged network adapters.

HPE BladeSystem c-Class compatible SFP+ transceiver (455883-B21) supports up to 400m link lengths over OM4 MMF (300m over OM3 MMF) via an LC duplex connector. It is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae standards. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Featuring low power consumptionand and high speed, this 10G SFP+ transceiver is ideal for data centers, enterprise wiring closets, service provider transport applications, Radio & Baseband Units, etc..Interfaces/ports: 1 x 10GBase SR SFP+.Compatibility: PC.Connectivity technology: Wired.Data transfer rate: 10GB/s gigabit ethernet.Maximum transfer distance: 980'.Form factor: Plug in module.HP 10GBase-SR Optical Transceiver Module - PC Compatible

Boost your network efficiency with the SonicWall Ethernet SFP+ Transceiver Module, offering lightning-fast data transfer speeds of 10,000 Mbps, superior optical fiber connectivity, and a compact design tailored for seamless integration into high-performance networking environments..Interface/ports: 1 x Ethernet 10GBase-SR, 1 x SFP+.Compatibility: PC.Connectivity technology: Wired.Form factor: Plug-in module.Cabling type: 10GBase-SR.Data transfer rate: 10 Gbps.Data link protocol: 10 gigabit-ethernet.Application/usage: Data networking, optical network.Sonicwall SFP+ Transceiver module connects the electrical circuitry with the optical or copper network and features 10Gbase-SR port.

Dell EMC SFP-10G-LR Compatible SFP+ Module - 10GBASE-LR - 10GbE Single Mode Fiber SMF Optic Transceiver - 10GE Gigabit Ethernet SFP+ - LC 10km - 1310nm - DDM (SFP10GLREMST).100% DELL EMC SFP-10G-LR COMPATIBLE SFP+ TRANSCEIVER: Designed, programmed and tested to work with compatible Dell EMC switches and routers to deliver dependable 10GbE connectivity.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself - not the life of your switch. Our modules won't void your OEM warranty and supported by our Tech Advisors 5/24..TECHNICAL SPECS: 10GBASE-LR | 10Gbps | Single Mode (SMF) | LC Connector | 1310nm | Digital Diagnostic Monitoring (DDM) | Distances up to 10km (6.2mi).TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Dell EMC routers and switches; DDM support reports the transceiver's status to most SNMP network management tools.WORKS WITH MSA COMPLIANT SWITCHES: Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules.10 Gbps | Single Mode Fiber | LC | 10 km (6.2 mi) | Lifetime Warranty

HPE BladeSystem c-Class transceivers are recommended options that have been selected by HPE experts to provide the right technology for a range of workloads and market segments offering the best combination of performance, value and availability..Single-mode fiber optic transceiver.Made in SFP+ form factor that supports the 10G-LR standard.Provides 10G connectivity.Maximum distance of up to 10km on single-mode fiber cable.Typical power consumption: 0.9W; maximum power consumption: 1W.Wavelength: 1310nm.Conditioning patch cord cables are not supported.For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish

The HPE Aruba Networking J8177E is a reliable SFP transceiver module designed for efficient wired connectivity. Featuring a plug-in module form factor, it supports a data transfer rate of 1 Gbps, ensuring quick and effective communication within your network. This transceiver adheres to Cat5e standards and is capable of a maximum transfer distance of 100 m, making it a versatile choice for various networking scenarios. With its RJ-45 connectors, the J8177E provides straightforward installation and compatibility, allowing for seamless integration into existing setups. This robust module enhances networking performance and reliability, ensuring that your data communication needs are met with ease..Durable and lightweight Plastic Optical Fiber (POF) for reliable data transmission. Equipped with an LC fiber connector for high-performance and secure connections..Its a transceiver module used for network connectivity..Has the following data transfer rates: 1000 Mbps (Megabits per second), 1 Gbps (Gigabit per second).supports a maximum distance of 100 meters (328 feet) for data transfer..It is Capable for both Gigabit and Ethernet..Typically consumes around 1 watt of power..Has a Mean Time Between Failures (MTBF) of approximately 2 million hours, ensuring exceptional reliability and longevity..Typically sold in the following quantities: Selling Quantity: 1 unit.

The AddOn® GLC-TE-AO SFP transceiver with RJ-45 10/100/1000Base-T network LAN interface, transfers data at the rate of 1 Gb/s over twisted pair copper media. It offers data transmission over the operating range of 100 m. This transceiver incorporates Gigabit Ethernet technology to employ faster data transmission. It is compatible with 2000 connected grid router series, Catalyst 2960-X series, IE2000/IE3000 series and Nexus 7000/9000 series. This hot-swappable transceiver is ideal for data networking..Hot-swappable SFP transceiver for data networking.Dimensions: 0.3"H x 0.5"W x 2.2"D.Interface/ports: One RJ-45 10/100/1000Base-T network LAN.Ethernet technology: Gigabit Ethernet.Media type supported: Twisted pair copper.Maximum data transfer rate: 1 Gb/s.Operating range: 100 m.Compatibility: 2000 connected grid router series, Catalyst 2960-X series, IE2000/IE3000 series, Nexus 7000/9000 series.Comes with lifetime limited warranty

HPE J9150D Compatible SFP+ Module - 10GBASE-SR - 10GbE MMF Optic Transceiver - 10GbE SFP+ - LC 300m - 850nm - DDM HPE FlexFabric, 6120XG, 6120G (J9150D-ST).100% HPE J9150D COMPATIBLE: Works with HPE switches like FlexFabric, 6120XG, 6120G, , and others.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself - not the life of your switch. Our modules won't void your OEM warranty and supported by our Tech Advisors 5/24.TECHNICAL SPECS: 10GBASE-SR | 10Gbps | Multi Mode (MMF) | LC Connector | 850nm | Digital Diagnostic Monitoring (DDM) | Distances up to 300m (984ft).TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in HPE routers and switches; DDM support reports the transceiver's status to most SNMP network management tools.WORKS WITH MSA COMPLIANT SWITCHES: Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules.10 Gbps | Multi Mode Fiber | LC | 300 m (984 ft) | Lifetime Warranty

StarTech SFP transceiver is a Meraki compatible copper transceiver module that has been designed, programmed and tested to work with Cisco Meraki brand switches and routers. It delivers dependable 1GbE (1000 Mbps) connectivity over copper cable, for 10BASE-T, 1000BASE-T and 100BASE-TX compliant networks, with a maximum distance of up to 328'..Cisco GLC-TE compatible copper transceiver module has been designed, programmed and tested to work with Cisco brand switches and routers.Dimensions: 0.5"H x 0.7"W x 2.7"D.Made of steel and comes in silver.Works with Cisco Meraki switches like MS225, MX400, MS250, MS350, MX84.Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link, and more that accept uncoded modules.Maximum data transfer rate: 1000 Mbps.Maximum transfer distance: 328'.MTBF: 4,655,371 hours.Power consumption: less than 1.3W.Hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.Lifetime manufacturer limited warranty

HPE J9151E Compatible SFP+ Module - 10GBASE-LR - 10GbE Single Mode (SMF) Fiber Optic Transceiver - 10GE Gigabit Ethernet SFP+ - LC 10km - 1310nm - DDM HPE 2930F, 8325, 3810M (J9151E-ST).100% HPE J9151E COMPATIBLE: Works with HPE switches like 2930F, 8325, 3810M, 5400zl, 5400R and others.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself - not the life of your switch. Our modules won't void your OEM warranty and supported by our Tech Advisors 5/24.TECHNICAL SPECS: 10GBASE-LR | 10Gbps | Single Mode (SMF) | LC Connector | 1310nm | Digital Diagnostic Monitoring (DDM) | Distances up to 10km (6.2mi).TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in HPE routers and switches; DDM support reports the transceiver's status to most SNMP network management tools.WORKS WITH MSA COMPLIANT SWITCHES: Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules.10 Gbps | Single Mode Fiber | LC | 10 km (6.2 mi) | Lifetime Warranty

Netgear® ProSafe® AXM763 LC Duplex Gigabit Ethernet SFP+ Transceiver for M5300 Switches.Suitable with M5300, M7100 and M7300 series Managed Switches, SFP+ interfaces of select smart and plus switches.Comes in silver color.Interface/ports: One LC duplex 10GBase-LRM network, SFP+ slot.Media type supported: Optical fiber, Fiber mode supported: Multi-mode, Cable standard: 50/125 u m, 62.5/125 u m.Ethernet technology: 10 Gigabit Ethernet, 10GBase-LRM.Data transfer rate: 10 Gbps, Transfer distance: 853' max.Form factor: Plug-in module

The StarTech® J4858C10PKST SFP (mini-GBIC) transceiver module supports half/full duplex multi mode fiber optic network connectivity. The transceiver module transfers the data over MMF at 1.25-Gbps speed, with a maximum reach up to 550 m at a wavelength of 850 nm using LC connector. This hot pluggable transceiver module provides highly reliable and cost-effective GbE network connections for 1000Base-SX networks and supports digital diagnostic monitoring..100% compatibility with HP J4858C guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1 W.Hot-swappable with fiber-optic modules.SFP network transceiver module is ideal for large-scale deployments or installations on multiple devices, this bulk pack of HP compatible gigabit fiber SFPs.

Add reliable and cost-effective 10 Gigabit Ethernet connections over copper, with this SFP+ module. This TAA compliant 10GBase-T SFP+ module delivers what you need most in your network connections: reliable performance. It's built to exacting MSA specifications and fully tested to ensure seamless compatibility. The RJ45 copper SFP+ transceiver module offers a cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Delivers 10 Gigabit Ethernet connections With data transfer rates of up to 10Gbps, this SFP+ module can be installed into networking equipment with an MSA compliant port and RJ45 copper interface. It delivers dependable 10 Gigabit connectivity over copper cable, for 10GBase-T compliant networks, with a maximum distance of up to 30 m (98.4 ft.)..Delivers reliable 10 GbE connections for 10GBASE-T compliant networks.StarTech® SFP modules are backed by a lifetime warranty.Uses a cost-effective cabling alternative to fiber-optic set ups.Complies with Multi-Source Agreement (MSA) industry standards.Hot-swappable with fiber-optic modules

The Axiom SFP-10G-SR-AX SFP+ transceiver module supports fiber network connectivity using MMF. The transceiver transfers the data over this MMF at 10GBASE-SR data rate, with a maximum reach of up to 300 m using OM3 and up to 400 m using OM4, at 850 nm wavelength. The transceiver comes with pre-configured specific code to meet the requirements set forth by your router and switch OEMs. This SFP transceiver module is compatible with Cisco Catalyst 2960-S/2960-X/3560-X/3750-X series and Nexus 5000/7000 series..SFP+ transceiver transfers the data over multi-mode fiber.Dimensions: 0.5"H x 0.5"W x 2.2"D.Compatible with Cisco Catalyst 2960-S/2960-X/3560-X/3750-X series, Nexus 5000/7000 series.Network technology: 10GBASE-SR.Interfaces/Ports: 1 x LC.Wavelength: 850 nm.Range: 300 m using OM3 and up to 400 m using OM4.Ethernet technology: 10 Gigabit Ethernet.Media type supported: Multi-mode optical fiber.Form factor: Plug-in module.Eliminates any network communication conflicts and provides easy identification.Fully comply with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms.Meets SFP+ MSA, RoHS, IEEE 802.3z standards.Comes with limited lifetime warranty

Add reliable and cost-effective 10 Gigabit Ethernet connections over single-mode fiber with this SFP+ module. This StarTech® 10 Gigabit fiber SFP+ is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco Meraki switches and routers that support the Cisco Meraki MA-SFP-10GB-LR transceiver module, as well as other major brands of networking equipment. This 10GBase-LR SFP+ delivers 10 Gigabit connectivity over single-mode fiber cable with a range of up to 10 km (6.2 mi.). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This 10 GbE SFP+ is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco Meraki and other major brands This 10 Gigabit single-mode SFP+ is engineered to the highest quality standards and is 100% Cisco Meraki compatible, equivalent to the Cisco Meraki MA-SFP-10GB-LR SFP+ transceiver. The StarTech® SFP+ transceiver module is configured and fully tested to ensure it works seamlessly with Cisco Meraki or other major brands of networking equipment. You can be assured that the use of StarTech® SFP products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber SFP+ transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a wide range of 10 Gigabit networking devices. Ideal for use in Cisco Meraki switches, routers and other networking equipment, the SFP+ optical transceiver provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The SM fiber transceiver module supports Digital Diagnostics Monitoring (DDM), a maximum distance of up to 10 km (6.2 mi.), and maximum data rates of up to 10Gbps. You can count on MASFP10GBLR for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco Meraki MA-SFP-10GB-LR guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.2 W.Hot-swappable with fiber-optic modules

This Cisco® SFP-10G-SR-S compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Cisco SFP-10G-SR-S Compatible.10GBase-SR SFP+ Transceiver.Media Type: MMF - Wavelength: 850nm - Reach: 300m - Connector Type: LC.100% application tested and guaranteed compatible.Limited Lifetime Warranty.Cisco® SFP-10G-SR-S Compatible TAA Compliant 10GBase-SR SFP+ Transceiver (MMF, 850nm, 300m, LC, DOM)

Industrial Fiber to Ethernet Media Converter - 1Gbps SFP to RJ45/ Cat6 - Singlemode/Multimode Optical Fiber to Copper Gigabit Network - 12-56V DC - IP-30/ -40 to +75C (IMC1GSFP).INDUSTRIAL FIBER TO ETHERNET MEDIA CONVERTER: Extends & converts 1Gbps fiber to RJ45 copper w/ hardened operating temp -40C to 75C; powered by 12V-56V DC for compatibility with solar, auto & rail.OPEN SFP SLOT: Compatible with any standard SFP and can be used for multimode or single mode fiber connections; easy deployment across applications, fiber distances or fiber cable types.ROBUST DESIGN: Industrial Gigabit Network Media Converter w/MTBF of 500,000+ hrs @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years; this media converter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: 1 Gbps | 12V-56VDC | Single Mode SMF & Multi-Mode MMF Fiber | 16K Jumbo Frames | LFP | IP-30 Housing | DIN or Wall Mountable | Terminal Block and/or Barrel Adapter for power redundancy.Gigabit Media Converter | SFP to RJ45 (Cat6) | MTBF: 500,000+hrs @ 50°C | 12V-56VDC

10GBASE-SR is a port type for MMF (multimode fiber) and uses 850 nm lasers. For longer reach, another standard defined in IEEE 802.3ae is 10GBASE-LR. 10GBASE-LR is a port type for SMF (single mode fiber) and uses 1310 nm lasers. Traditionally SMF 10GBASE-LR SFP+ modules are way more expensive than MMF 10GBASE-LR SFP+ modules. MMF and SMF historical short range / long range paradigm may change in short term: since 2014, for new installations, especially indoor, SMF wiring is about half of MMF wiring. As a consequence, lots of new buildings and datacenters now standardize on SMF. But 10GBASE-LR SFP+ transceivers are too expensive for short-range connections. A new market for short distances over SMF has been created: the industry is standardizing on a new class of SMF 10G transmitters with typical 10GBASE-LR LITE SFP+ transceivers. While not a standard yet, 10GBASE-LR LITE has a specified reach of 2 km over standard 9µm single mode fiber. 10GBASE-LR LITE isn’t a replacement for 10GBASE-LR optics: it is just relevant alternative for “shorter” reach SMF applications..Utilizes LC duplex connectors with single-mode fiber (SMF) for high-speed data transmission.10GBASE-LR Lite SFP+ transceiver for 10GbE over single-mode fiber.Data transfer rate of 10 Gigabits per second (10Gbps), equivalent to 10,000 Megabits per second (Mbps).Supports maximum transmission distance of up to 2,000 meters over single-mode fiber.10 Gigabit Ethernet connectivity for high-speed network performance.Hot-swappable, allowing installation or removal without powering down the system.MSA compliant, ensuring interoperability with other MSA-compliant networking equipment.Operates at a wavelength of 1310 nanometers (nm)

The Netgear® ProSafe® AGM734 Gigabit Ethernet SFP transceiver has RJ-45 100Base-T connector and SFP slot to provide reliable connection. It has a data transfer rate of 1 Gbps. The transceiver for data networking, drives Gigabit Ethernet up to 100 m distance with category 5E/category 6 copper connectivity. It is compatible with SFP+ interfaces of XSM7224S and SFP interfaces of GSM7328FS switches..Suitable with SFP+ interfaces of XSM7224S and GSM7328FS.Comes in silver color.Interface/ports: One RJ-45 1000Base-T network LAN, SFP slot.Media type supported: Twisted pair.Ethernet technology: Gigabit Ethernet, 1000Base-T.Data transfer rate: 1 Gbps

Add reliable and cost-effective 10 Gigabit Ethernet connections over multimode fiber with this SFP+ module. This StarTech® 10 Gigabit fiber SFP+ is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco Meraki switches and routers that support the Cisco Meraki MA-SFP-10GB-SR SFP+ transceiver module, as well as other major brands of networking equipment. The 10GBase-SR SFP+ delivers 10 Gigabit connectivity over multi-mode fiber cable with a range of up to 300 m (984 ft). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This 10 GbE SFP+ is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco and other major brands The 10 Gigabit multi-mode SFP+ is engineered to the highest quality standards and is 100% Cisco compatible, equivalent to the Cisco Meraki MA-SFP-10GB-SR SFP+ transceiver. The StarTech® SFP+ is configured and fully tested to ensure it works seamlessly with HP or other major brands of networking equipment. You can be assured that the use of StarTech® SFP+ products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber SFP+ transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a wide range of 10 Gigabit networking devices. Ideal for use in Cisco switches, routers and other networking equipment, the SFP+ optical transceiver provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The multi-mode fiber transceiver module supports Digital Diagnostics Monitoring (DDM), a maximum distance of up to 300 m (984 ft), and maximum data rates of up to 10Gbps. You can count on MASFP10GBSR for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco Meraki MA-SFP-10GB-SR guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.2 W.Hot-swappable with fiber-optic modules

Add reliable and cost-effective Gigabit Ethernet connections over single-mode fiber with this SFP module. This StarTech® Gigabit fiber SFP is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco Meraki switches and routers that support the Cisco Meraki MA-SFP-1GB-LX10 transceiver module, as well as other major brands of networking equipment. This 1000Base-LX SFP delivers Gigabit connectivity over single-mode fiber cable, with a range of up to 10 km (6.2 mi.). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This single-mode SFP transceiver is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco and other major brands The SM Gigabit SFP is engineered to the highest quality standards and is 100% Cisco Meraki compatible, equivalent to the Cisco Meraki MA-SFP-1GB-LX10 SFP transceiver. The StarTech® SFP transceiver is configured and fully tested to ensure it works seamlessly with Cisco Meraki or other major brands of networking equipment. You can be assured that the use of StarTech® SFP products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a multitude of Gigabit networking devices. Ideal for use in switches, routers, and other networking equipment, the SFP provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The SFP supports single-mode fiber cable with a maximum distance of 10 km or 6.2 mi., and maximum data rates of up to 1.25Gbps. This GbE fiber SFP also supports Digital Diagnostics Monitoring (DDM / DOM). You can count on MASFP1GBLX10 for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco Meraki MA-SFP-1GB-LX10 guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1 W.Hot-swappable with fiber-optic modules

This SFP-H10GB-CU3M-AO 10GBase-CU SFP+ to SFP+ direct attach cable from AddOn is simple to use and programmable to work according to user requirements. This 30 AWG copper cable is uniquely serialized, application-tested and data-traffic tested to assure that it will initialize and function uniformly. It supports Gigabit Ethernet technology for quick data transfer..Passive twinaxial direct attach cable is ideal to use with networking devices.Dimensions: 9.84' L.Compatible with Cisco 500 Series Stackable Managed Switch SF500-24, SF500-24P, Catalyst 2960-S Series WS-C2960S-24PD-L and WS-C2960S-24TD-L.Has copper conductor for superior electrical conductivity.Features SFP+ interface for connecting networking devices.Supports Gigabit Ethernet technology for quick data transfer.Wire gauge: 30 AWG.Meets MSA, TAA Compliance.Weight: 2.4 oz..Comes with lifetime limited warranty.The AddOn 10GBase-CU SFP+ to SFP+ direct attach cable for Cisco SFP-H10GB-CU3M works over passive copper with a maximum reach of 9.84'.

The Omnitron miConverter™ 1239-0-1 miniature transceiver/fiber media converter supports 1000Base-X, 1000Base-BX-D, 1000Base-T, 1000Base-ZX, 1000Base-BX10-U, 1000Base-BX and 1000Base-LX/SX networks. This SFP-type converter enables easy adaptability to different fiber types and supports CWDM technology to increase the bandwidth of fiber infrastructure with speed and distance. It facilitates a plug-and-play option with multi-mode and single-mode optical fiber..Transceiver/media converter supports 10BASE-T, 100BASE-TX, 1000BASE-T, 1000BASE-X and the IEEE 802.3 network specifications.Dimensions: 0.84"H x 1.71"W x 4.1"D.Interfaces/port: 1 x Network (RJ-45), 1 x SFP.Ethernet technology: Ethernet, Fast Ethernet, Gigabit Ethernet.Media type supported: Twisted pair, optical fiber, Network technology: 1000Base-X, 1000Base-BX-D, 1000Base-T, 1000Base-ZX, 1000Base-BX10-U.Form factor: Rack-mountable, desktop, external, wall mountable.Power: 100-240 VAC/60 Hz, 5-12 VDC via 2.5 mm barrel input voltage.Jumbo frame support: Up to 10240 bytes, MTBF: 250000 hours.Supports MDI/MDIX auto-crossover, cost-effective mounting and proven solution.Includes US power supply - 120-240 V/50-60 Hz, velcro strip, user manual.Meets RoHS, WEEE, UL, CE, FCC Class A standards.Comes with lifetime warranty

Add reliable and cost-effective Gigabit Ethernet connections over multimode fiber with this SFP module. This StarTech® Gigabit fiber SFP is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco switches and routers that support the Cisco Meraki MA-SFP-1GB-SX transceiver module, as well as other major brands of networking equipment. This 1000Base-SX SFP delivers Gigabit connectivity over multimode fiber cable, with a range of up to 550 m (1804 ft.). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This multimode SFP transceiver is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco Meraki and other major brands The MM Gigabit SFP is engineered to the highest quality standards and is 100% Cisco Meraki compatible, equivalent to the Cisco Meraki MA-SFP-1GB-SX SFP transceiver. The StarTech® SFP transceiver is configured and fully tested to ensure it works seamlessly with Cisco Meraki or other major brands of networking equipment. You can be assured that the use of StarTech® SFP products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a multitude of Gigabit networking devices. Ideal for use in switches, routers, and other networking equipment, the SFP provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The SFP supports multimode fiber cable with a maximum distance of 550 m or 1804 ft., and maximum data rates of up to 1.25Gbps. This GbE fiber SFP also supports Digital Diagnostics Monitoring (DDM / DOM). You can count on MASFP1GBSXST for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco Meraki MA-SFP-1GB-SX guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1 W.Hot-swappable with fiber-optic modules

This Meraki Cisco® MA-SFP-1GB-SX compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Meraki Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Cisco Meraki MA-SFP-1GB-SX Compatible.1000Base-SX SFP Transceiver.Media Type: MMF - Wavelength: 850nm - Reach: 550m - Connector Type: LC.100% application tested and guaranteed compatible.Limited Lifetime Warranty.Meraki Cisco® MA-SFP-1GB-SX Compatible TAA Compliant 1000Base-SX SFP Transceiver (MMF, 850nm, 550m, LC, DOM)

The Dell SFP transceiver delivers fiber connectivity to extend the range of your network. This hot-pluggable transceiver with SFP (Small Form Factor Pluggable) footprint features a Duplex LC connector. The Dell networking 1000BASE SFP transceiver provides 1000BASE connectivity up to 10 km..SFP transceiver delivers fiber connectivity to extend the range of your network.Comes in silver.Compatible with different EMC Networking/PowerSwitch/PowerConnect/PowerEdge systems.Cabling type: 1000BASE-LX.Optical wave length: up to 1310nm.Maximum transfer distance: 6.2 miles.Data transfer rate: 1Gbps

The HP® QK724A SFP+ short wave transceiver module connects into a 10GBase-X network port. This optical fiber device possesses data transfer rate of 16 Gb/s. The SFP+ transceiver is compatible for use with HP® B-series SAN director switch. It is perfect for data networking applications..Dimensions: 0.6"H x 6.1"W x 7.2"D.Interface: One 10GBase-X network.Supports data transfer rate up to 16 Gbps.Supports optical fiber media for data transmission using 10 Gigabit Ethernet technology and 10GBase-T network technology.Compatible with HP B-series SAN Director switch.Meets Green, REACH, RoHS certification and standards.Weight: 8.11 oz..1 x 10GBase-X16 Gbps.16Gb SFP+ short wave transceiver

Aruba is unique in that it produces trustworthy outcomes based on three key ingredients - an extensive volume and variety of data, domain expertise, and experienced data scientists. Combining over 18 years of proven wired and wireless network expertise with modeling telemetry data from over one million wired, wireless and SD-WAN devices, Aruba can identify anomalies and provide prescriptive recommendations that network administrators can trust..10G SFP+ transceiver for use with selected Aruba switches.Dimensions: 0.6"H x 2.2"W x 0.5"D.Compatible with Aruba switches.Comes in silver.Lifetime manufacturer limited warranty.Range: 984'.Ethernet technology: 10 Gigabit Ethernet.Media type supported: Optical fiber.Form factor: Plug-in module.Weight: 0.1 lb.Comes with limited lifetime warranty.10GBase-SR SFP+ transceiver module features 1 x LC connection and supports optical fiber media.

Dell EMC DAC-SFP-10G-1M Compatible 1m 10G SFP+ to SFP+ Direct Attach Cable Twinax - 10GbE SFP+ Copper DAC 10 Gbps Low Power Passive Mini GBIC/Transceiver Module DAC (DACSFP10G1M).100% DELL EMC DAC-SFP-10G-1M COMPATIBLE DAC: 10G direct attach cable works with Dell EMC switches and is MSA compliant.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself, not the life of your switch; our modules won't void your OEM warranty and supported by our Tech Advisors 5/24.TECHNICAL SPECS: 1m (3.3ft) | 10 Gbps | Passive Twinax (Copper) | 2 x SFP+ Pluggable Connector | 100 Ohm Impedance | 30 AWG Wire Gauge | PVC Cable Jacket | Hot swappable | MSA Compliant.TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Dell EMC routers and switches.WORKS WITH MSA COMPLIANT SWITCHES: Low power 10GbE DAC also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules and transceivers.10 Gbps | Passive Copper Cable | 1 m (3.3ft) | Lifetime Warranty

Aruba is unique in that it produces trustworthy outcomes based on three key ingredients - an extensive volume and variety of data, domain expertise, and experienced data scientists. Combining over 18 years of proven wired and wireless network expertise with modeling telemetry data from over one million wired, wireless and SD-WAN devices, Aruba can identify anomalies and provide prescriptive recommendations that network administrators can trust..1G SFP transceiver for use with selected Aruba switches.Dimensions: 0.6"H x 2.2"W x 0.5"D.Compatible with Aruba switches.Comes in silver.Lifetime manufacturer limited warranty.Transfer distance: 1640'.Ethernet technology: Gigabit Ethernet.Compatibility: Aruba 2930M 24, 2930M 40, 2930M 40, 8320 switches.Form factor: Plug-in module.Weight: 0.1 lbs..Comes with lifetime limited warranty

Aruba is unique in that it produces trustworthy outcomes based on three key ingredients - an extensive volume and variety of data, domain expertise, and experienced data scientists. Combining over 18 years of proven wired and wireless network expertise with modeling telemetry data from over one million wired, wireless and SD-WAN devices, Aruba can identify anomalies and provide prescriptive recommendations that network administrators can trust..10G SFP+ transceiver for use with selected Aruba switches.Dimensions: 0.6"H x 2.2"W x 0.5"D.Compatible with Aruba switches.Comes in silver.Lifetime manufacturer limited warranty.Range: 722'.Ethernet technology: 10 Gigabit Ethernet.Media type supported: Optical fiber.Form factor: Plug-in module.Weight: 0.1 lb.Comes with limited lifetime warranty.10GBase-SR SFP+ transceiver module features 1 x LC connection and supports optical fiber media.

The Aruba switches provides cost-effective, reliable and secure access layer connectivity for enterprises, branch offices and small and midsize businesses. These fully managed switches deliver Layer Two capabilities with enhanced access security, traffic prioritization, sFlow, and IPv6 host support. PoE+ models deliver up 370W to power access points, IP phones and cameras. The Aruba 2530 Switch Series is easy to deploy, use and manage using Aruba AirWave or Aruba Central. Aruba ClearPass offers network access control (NAC) and external captive portal support. The switches include a Limited Lifetime Warranty..The small form-factor pluggable (SFP) is a compact, hot-pluggable network interface module used for both telecommunication and data communications applications.Dimensions: 0.5"H x 0.6"W x 2.2"D.Comes in silver color.Max transfer distance: 10km.Transceiver provided local connector (LC) that works in single mode and has Ethernet 1000Base-LH interface type.Transfer speed: 1Gb/s.Lifetime manufacturer limited warranty

Add up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in an IT Administrator workstation or server backplane, using this 2-Port SFP Network Controller. The network controller features an Intel I350 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel® VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps per port.Has two SFP slots.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I310 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slots for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

Add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x1 (or higher) slot in an IT Administrator workstation or server backplane, using StarTech this 1-Port SFP network controller. The network controller features an Intel I210 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x 1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps.Has one SFP slot.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I210 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slot for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.2-year manufacturer limited warranty