Copper SFP Modules
5 results
This Cisco-compatible SFP+ transceiver provides 100/1000/10000Base throughput up to 98' over Copper. It is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy-to-install, hot-swappable transceiver has been programmed, uniquely serialized, and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant..Copper SFP+ transceiver module is a hot-swappable SFP transceiver guaranteed to be 100% compatible with the equivalent Cisco transceiver.Hot-swappable transceiver has been programmed, uniquely serialized, and data-traffic and application tested to ensure that it will initialize and perform identically.Provides 100/1000/10000BASE throughput up to 30m over copper.Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters.This transceiver is Trade Agreements Act (TAA) compliant
Add reliable and cost-effective Gigabit Ethernet connections over copper, with this SFP module. This 1000Base-TX SFP module delivers what you need most in your network connections: reliable performance. It's built to exacting MSA specifications and fully tested to ensure seamless compatibility. The RJ45 copper SFP transceiver module offers a cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Delivers Gigabit Ethernet connections With data transfer rates of up to 1Gbps, this SFP module can be installed into networking equipment with an MSA compliant port and RJ45 copper interface. It delivers dependable Gigabit connectivity over copper cable for 1000Base-TX compliant networks, with a maximum distance of up to 100 m (328 ft.)..Delivers reliable RJ45 Gigabit Ethernet connections for 1000Base-TX compliant networks.Meets or exceeds MSA (Multi-Source Agreement) industry standards.Backed by lifetime warranty and free lifetime technical support
Use this compact AddOn GLC-T-AO transceiver module to create a direct link between your network device and a copper or fiber-optic networking cable. The unit's 1 Gbps gigabit Ethernet data-transfer rate is suitable for most business applications. You won't even need to schedule a service interruption; because of its hot-pluggable nature, the module can be installed in a live server system..Interfaces/ports: 1 x 1000Base-T LAN, 1 x RJ-45 1000Base-T network LAN.Dimensions: 0.6"(H) x 1/2"(W) x 2.8"(D).Compatibility: Cisco 7300 series routers, catalyst 2940-8TF-S switch, catalyst 2970G-24TS switch, catalyst 3750G-24TS switch, catalyst 3750-24TS switch, catalyst 3750-48TS switch.Connectivity technology: Wired.Connectivity media: Category 5 twisted pair 1000Base-T.Humidity: 0% - 95%.Operating temperature: 0 - 20 deg C.Fully metallic enclosure for low EMI.Low power dissipation (1.05 W typical).Data transfer rate: 1 Gb/s gigabit Ethernet.Form factor: Hot-swappable.Application/usage: Data networking.2 years limited warranty.Headset control panel allows for customization of settings, Including call notification and related options.Battery meter conveniently displays headset battery life remaining in PC icon tray.Compatible with: PC, Bluetooth version 3.0 + EDR, Cellular phone, Smartphone, Tablet PC, Apple iPhone.Weight: 0.03 lbs..Warranty: 1 year limited.AddOn GLC-T-AO Transceiver Module - Enhanced Small Form-Factor Hot-Swappable Interface Unit
Add reliable and cost-effective 10 Gigabit Ethernet connections over copper, with this SFP+ module. This TAA compliant 10GBase-T SFP+ module delivers what you need most in your network connections: reliable performance. It's built to exacting MSA specifications and fully tested to ensure seamless compatibility. The RJ45 copper SFP+ transceiver module offers a cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Delivers 10 Gigabit Ethernet connections With data transfer rates of up to 10Gbps, this SFP+ module can be installed into networking equipment with an MSA compliant port and RJ45 copper interface. It delivers dependable 10 Gigabit connectivity over copper cable, for 10GBase-T compliant networks, with a maximum distance of up to 30 m (98.4 ft.)..Delivers reliable 10 GbE connections for 10GBASE-T compliant networks.StarTech® SFP modules are backed by a lifetime warranty.Uses a cost-effective cabling alternative to fiber-optic set ups.Complies with Multi-Source Agreement (MSA) industry standards.Hot-swappable with fiber-optic modules
Dell EMC DAC-SFP-10G-2M Compatible 2m 10G SFP+ to SFP+ Direct Attach Cable Twinax - 10GbE SFP+ Copper DAC 10 Gbps Low Power Passive Mini GBIC/Transceiver Module DAC (DACSFP10G2M).100% DELL EMC DAC-SFP-10G-2M COMPATIBLE DAC: 10G direct attach cable works with Dell EMC switches and is MSA compliant.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself, not the life of your switch; our modules won't void your OEM warranty and supported by our Tech Advisors 5/24.TECHNICAL SPECS: 2m (6.6ft) | 10 Gbps | Passive Twinax (Copper) | 2 x SFP+ Pluggable Connector | 100 Ohm Impedance | 30 AWG Wire Gauge | PVC Cable Jacket | Hot swappable | MSA Compliant.TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Dell EMC routers and switches.WORKS WITH MSA COMPLIANT SWITCHES: Low power 10GbE DAC also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules and transceivers.10 Gbps | Passive Copper Cable | 2 m (6.6ft) | Lifetime Warranty
You May Also Like
The AddOn® GLC-T-10G-AO transceiver module with RJ-45 10GBase-TX network LAN interface, transfers data at the rate of 10 Gb/s over twisted pair copper media. It offers data transmission over the operating range of 30 m. This transceiver module incorporates 10 Gigabit Ethernet technology to employ faster data transmission. This hot-swappable transceiver module is ideal for data networking..Hot-swappable SFP+ transceiver module for data networking.Dimensions: 1.2"H x 2.8"W x 4.8"D.Interface/ports: One RJ-45 10GBase-TX network LAN.Ethernet technology: 10 Gigabit Ethernet.Media type supported: Twisted pair copper.Maximum data transfer rate: 10 Gb/s.Operating range: 30 m.MSA compliant.Comes with lifetime limited warranty
The StarTech® SFP10GLRST 10 Gigabit fiber LC SFP+ transceiver module offers reliable 10 Gigabit Ethernet connections for 10GBase-LR compliant networks. This Gigabit SFP+ module ensures maximum performance and easily installs into Cisco® switches. This transceiver module measures 2.2" x 0.5" x 0.5" and is compatible with 10 Gigabit fiber networking equipment as well as media converters. It has aluminum construction with zinc-plated casing enclosure for added protection. It has LC duplex 10GBase-LR network port for connectivity and supports single-mode optical fiber media to transfer data at 10 Gbps up to a distance of 10 km..100% compatibility with Cisco SFP-10G-LR guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.3 W.Hot-swappable with fiber-optic modules
Startech.com® SFP+ Hot pluggable transceiver module sustain data rates up to 11.1 Gbps and DDM while it can be installed on any fiber networking cable. Module does not require any rebooting and support a distance of 300m..Interfaces/Ports: 1 x 10GBase-SR.Dimensions: 0.4inch(H) x 0.5inch(W) x 2.4inch(D).Compatibility: MSA compliant.Interfaces/ports details: 1 x LC female 10GBase-SR network.Wavelength: 850 nm.Fiber operating mode: half/full-duplex.Fiber type: Multi-mode.Maximum data rates up to 11.1 Gbps.Operating temperature: 0 to 70 deg c, storage temperature: - 40 to 85 deg c, operating humidity: 30 to 70% RH.Local unit connectors: 1 - fiber optic LC female.Warranty: 3 years limited.Startech.com® SFP+ Transceiver module is a compact set used for both telecommunication as well as data communication applications while it upgrades a 10Gb SFP+ multimode LC port on fiber media converter.
The Cisco 10GBASE-SR module supports link lengths up to 26m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). Using 2000MHz x km of MMF (OM3), it is possible to create link lengths up to 300m, and with 4700MHz x km MMF (OM4), link lengths up to 400m are possible..Multimode fiber optic transceiver with dual LC/PC connector.10GBASE SFP+ module for data center, enterprise wiring closet, and service provider transport applications.Provides data transfer rates up to 10Gbps.Supports link lengths up to 26m on standard FDDI-grade MMF; up to 300m on 2000MHz x km MMF (OM3); and up to 400m on 4700MHz x km MMF (OM4).Power consumption: 1W.Hot-swappable, plugs into an Ethernet SFP+ port.Compliant with the SFP+ MSA SFF-8431 standard.Wavelength: 850nm.Form factor: Hot-swappable.MSA compliant.Commercial temperature: 32 to 158 degrees Fahrenheit.Supports digital optical monitoring capability.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.1-year manufacturer limited warranty
Add reliable and cost-effective 10 Gigabit Ethernet connections over multimode fiber with this SFP+ module. This StarTech® 10 Gigabit fiber SFP+ is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco® switches and routers that support the Cisco SFP-10G-SR-S SFP+ transceiver module, as well as other major brands of networking equipment. This 10GBase-SR SFP+ delivers 10 Gigabit connectivity over multi-mode fiber cable with a range of up to 300 m (984 ft). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This 10 GbE SFP+ is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco and other major brands This 10 Gigabit multi-mode SFP+ is engineered to the highest quality standards and is 100% Cisco compatible, equivalent to the Cisco SFP-10G-SR-S SFP SFP+ transceiver. The StarTech® SFP+ is configured and fully tested to ensure it works seamlessly with HP or other major brands of networking equipment. You can be assured that the use of StarTech® SFP+ products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber SFP+ transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a wide range of 10 Gigabit networking devices. Ideal for use in Cisco switches, routers and other networking equipment, the SFP+ optical transceiver provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The multi-mode fiber transceiver module supports Digital Diagnostics Monitoring (DDM), a maximum distance of up to 300 m (984 ft), and maximum data rates of up to 10Gbps. You can count on SFP10GSRSST for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco SFP-10G-SR-S guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.3 W.Hot-swappable with fiber-optic modules
Dell EMC SFP-10G-LR Compatible SFP+ Module - 10GBASE-LR - 10GbE Single Mode Fiber SMF Optic Transceiver - 10GE Gigabit Ethernet SFP+ - LC 10km - 1310nm - DDM (SFP10GLREMST).100% DELL EMC SFP-10G-LR COMPATIBLE SFP+ TRANSCEIVER: Designed, programmed and tested to work with compatible Dell EMC switches and routers to deliver dependable 10GbE connectivity.LIFETIME WARRANTY: Backed by a lifetime warranty on the life of the module itself - not the life of your switch. Our modules won't void your OEM warranty and supported by our Tech Advisors 5/24..TECHNICAL SPECS: 10GBASE-LR | 10Gbps | Single Mode (SMF) | LC Connector | 1310nm | Digital Diagnostic Monitoring (DDM) | Distances up to 10km (6.2mi).TESTED FOR OEM HOST COMPATIBILITY: Hot-swappable in Dell EMC routers and switches; DDM support reports the transceiver's status to most SNMP network management tools.WORKS WITH MSA COMPLIANT SWITCHES: Also works with switch models from Ubiquiti, D-Link, Netgear, Supermicro, TP-Link and more that accept uncoded modules.10 Gbps | Single Mode Fiber | LC | 10 km (6.2 mi) | Lifetime Warranty
The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver, and it supports up to 400m link length when uses 4700Mhz KM MMF (OM3). The 10GBase-SR SFP+ module offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver.Industry’s smallest 10G form factor for greatest density per chassis.Compatibility: Cisco nexus 5000 series Switches, cisco nexus 7000 series switches.Hot Pluggable.850nm VCSEL transmitter, PIN photo-detector.Maximum link length of 300m on 2000MHz/km MMF.Operating case temperature: 0 to 70 °C.Additional information: Spare product, distance 300 m.Form factor: Plug-in module.Application/usage: Data networking.90 days limited warranty.The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver. SFP+ transceiver module supports a link length of 26 m on standard fiber distributed data interface (FDDI)-grade multimode fiber (MMF).
The Cisco 10GBASE SFP+ module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Transceiver module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.Comes in gray.Power consumption: 0.1W.Compact 10G form factor for great density per chassis.Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing).Supports “pay-as-you-populate” model for investment protection and ease of technology migration.Digital optical monitoring for strong diagnostic capabilities.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.5-year manufacturer limited warranty
ACP's industry-standard 10Gbase-SR SFP+ is a hot-swappable input/output device that plugs into a gigabit Ethernet slot, linking the port with the fiber-optic network..Interfaces/ports: 1 x 10GBase-SR, 1 x LC/PC duplex 10GBase-SR network.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Cisco Nexus 5000 series, 7000 series switches.Connectivity technology: Wired.Connectivity media: 62.5 um, 50 um multi mode fiber 10GBase-SR.Humidity: 0% - 95%.Operating temperature: 32 -158 deg F.Enclosure type: Plug-in module.Data transfer rate: 10 Gb/s gigabit Ethernet.Form factor: Hot-swappable.Application/usage: Data networking.3 years limited warranty.Transceiver module compatible 10GBase-SR SFP+ sub watt power consumption and its excellent EMI performance allow system design with high port density.
The StarTech® J4858C10PKST SFP (mini-GBIC) transceiver module supports half/full duplex multi mode fiber optic network connectivity. The transceiver module transfers the data over MMF at 1.25-Gbps speed, with a maximum reach up to 550 m at a wavelength of 850 nm using LC connector. This hot pluggable transceiver module provides highly reliable and cost-effective GbE network connections for 1000Base-SX networks and supports digital diagnostic monitoring..100% compatibility with HP J4858C guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1 W.Hot-swappable with fiber-optic modules.SFP network transceiver module is ideal for large-scale deployments or installations on multiple devices, this bulk pack of HP compatible gigabit fiber SFPs.
The StarTech® GLCSXMMDSTT SFP network transceiver module supports fiber optic network connectivity using GbE technology. This transceiver module provides 1000Base-SX network connectivity for data networking and optical network applications. It transfers the data over optical multi-mode fiber with a maximum reach of up to 550 m, at a wavelength of 850 nm using LC female duplex connector. This easy to install transceiver is compatible with Cisco modules. The transfer module features digital optical monitoring (DOM) support that allows you to access real time operating parameter..100% compatibility with Cisco GLC-SX-MMD guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1 W.Hot-swappable with fiber-optic modules
Industry standard Cisco small form factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a gigabit Ethernet port or slot, linking the port with the network..Interfaces/ports: 1 x LC duplex 1000Base-LX/LH.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Cisco IE 3000 series switches, cisco 3200 series rugged routers, cisco MWR 2900 mobile wireless routers.Connectivity technology: Wired.Connectivity media: Single mode fiber 1000Base-LX/LH.Operating temperature: -40 - 185 deg F.Fiber type: SMF/MMF.Cabling type: Ethernet 1000Base-LX.Additional information: Spare product, range: 10 Km, wavelength: 1300 nm.Data transfer rate: 1 Gb/s gigabit Ethernet.Form factor: Hot swappable/plug-in.Application/usage: Data networking.SFP (mini-GBIC) transceiver module 1000 MBPS SFP single mode rugged 1000BASE-LX/LH SFP for MMF and SMF.
Add reliable and cost-effective 10 Gigabit Ethernet connections over single-mode fiber with this SFP+ module. This StarTech® 10 Gigabit fiber SFP+ is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco Meraki switches and routers that support the Cisco Meraki MA-SFP-10GB-LR transceiver module, as well as other major brands of networking equipment. This 10GBase-LR SFP+ delivers 10 Gigabit connectivity over single-mode fiber cable with a range of up to 10 km (6.2 mi.). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This 10 GbE SFP+ is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco Meraki and other major brands This 10 Gigabit single-mode SFP+ is engineered to the highest quality standards and is 100% Cisco Meraki compatible, equivalent to the Cisco Meraki MA-SFP-10GB-LR SFP+ transceiver. The StarTech® SFP+ transceiver module is configured and fully tested to ensure it works seamlessly with Cisco Meraki or other major brands of networking equipment. You can be assured that the use of StarTech® SFP products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber SFP+ transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a wide range of 10 Gigabit networking devices. Ideal for use in Cisco Meraki switches, routers and other networking equipment, the SFP+ optical transceiver provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The SM fiber transceiver module supports Digital Diagnostics Monitoring (DDM), a maximum distance of up to 10 km (6.2 mi.), and maximum data rates of up to 10Gbps. You can count on MASFP10GBLR for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco Meraki MA-SFP-10GB-LR guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.2 W.Hot-swappable with fiber-optic modules
This Ethernet fiber media converter offers an easy, cost-effective way to extend your network over fiber, using the SFP+ of your choice. It converts a copper RJ45 Ethernet connection to 10 Gigabit fiber, to extend your network over longer distances or connect workstations to switches. Cost-Effective Extensions and Flexible Performance : The RJ45 to fiber media converter provides a cost-efficient way to connect an Ethernet network to remote devices over a fiber backbone. It features an open SFP+ slot that supports the MSA-compliant 10 Gigabit SFP+ that best suits your fiber connection setup (single mode/multimode) and distance requirements. A Versatile Way to Connect Different Networks: The 10Gb fiber media converter supports auto-negotiation while providing versatile connectivity to existing networks and devices, maximizing the usage and performance of legacy equipment. Network Compatibility: 10GBASE-ER. 10GBASE-LR. 10GBASE-LW. 10GBASE-EW. 10GBASE-R. 10GBASE-SR. 10GBASE-SW. 10GBASE-T. Fast and Easy Installation: The unmanaged fiber media converter has a standalone compact design with simple plug-and-play setup to ensure fast and easy installation. StarTech.com Fiber Media Converters: Overcome the distance limitations of traditional network cables with StarTech.com fiber media converters. Our converters connect different types of network cabling and help you extend networks between buildings and over longer distances. Whether you need to extend a network connection 550 m or 40 km, we can help you. The MCM10GSFP Ethernet Fiber Media Converter is backed by a StarTech.com 2-year warranty and free North American based multilingual lifetime technical support..Convert between an RJ45 copper Ethernet connection and a fiber-optic connection to extend your network cost-effectively.Customize the network extension distance to your requirements with virtually any MSA-compliant multimode or single-mode transceiver using the open 10Gb SFP+ slot.10Gbps (10GBASE-T) compatible RJ45 port supports auto-negotiation.Install easily with compact and durable standalone design
The StarTech.com® GLCTST hot-pluggable SFP transceiver ensures a reliable GbE connection up to 100 m using RJ-45 connector. This transceiver offers port flexibility to match your changing needs over time, from copper to fiber..Hot-pluggable transceiver provides reliable and cost effective GbE connection using RJ-45 connector.Dimensions: 0.6"H x 0.5"W x 2.7"D.Comes in silver color with aluminum enclosure.Interfaces/port: 1 x RJ-45 female.Ethernet technology: Gigabit Ethernet.Media type supported: Twisted pair.Maximum data transfer rate: 1 Gbps.Operating range: 100 m.Compatible with Mini-GBIC fiber (MM or SM) and copper (RJ45) slots (NICS, fiber media converters).Ideal for use in switches, routers and other networking equipment, SFP allows to expand your network to remote segments cost-effectively.It provides a versatile and convenient solution that is compatible with a multitude of multi and single-port Gigabit Ethernet networking devices.Meets RoHS, WEEE standards.Weight: 0.9 oz..Comes with lifetime warranty
The Cisco 10/25GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G. This module requires RS-FEC on the host ports for operation at 25G..This 10/25GBASE-LR module supports a link length of 10km on standard Single-Mode Fiber (SMF) G.652 at both 10G and 25G.Max power consumption: 1.3W.Meets or exceeds the IEEE 802.3by and IEEE 802.3cc standards.Certified and tested on Cisco SFP28 ports for superior performance, quality, and reliability.This module requires RS-FEC on the host ports for operation at 25G.Transmit and receive wavelength: 1260-1355nm (10G) and 1295-1325nm (25G)