Gigabit SFP Modules
200 results
If your current port density doesn't quite meet your needs, upgrade your system with the Juniper SFP-1GE-SX SFP module. This hot-pluggable piece boasts a wavelength that extends anywhere from 830 nm to 860 nm and has an impressive launch power that typica.1 x 1000Base-SX.Optical interface: Multi-mode.Interface: 1 x SFP.Data transfer rate: 1000 Mbps.Form factor: Plug-in module.Network technology: 1000Base-SX Gigabit Ethernet.Average launch power: -9.5 through 0 dBm, Average receive power: -17 through 0 dBm.Maximum distance: 62.5/125 MMF cable: 656', 50/125 MMF cable: 1640'.Transmitter wavelength: 770 through 860 nm.Receiver sensitivity: -17 dBm.500 m reach on 50/125 micrometer MMF.Wavelength: 830 to 860 nm.SNMP: V 1.Average launch power: -9.5 to -4 dBm.Receiver saturation: -3 dBm.Form factor: Small.Juniper SFP-1GE-SX Gigabit Ethernet SFP Module - Wired Connection
The Cisco 10GBASE-SR module supports link lengths up to 26m on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber (MMF). Using 2000MHz x km of MMF (OM3), it is possible to create link lengths up to 300m, and with 4700MHz x km MMF (OM4), link lengths up to 400m are possible..Multimode fiber optic transceiver with dual LC/PC connector.10GBASE SFP+ module for data center, enterprise wiring closet, and service provider transport applications.Provides data transfer rates up to 10Gbps.Supports link lengths up to 26m on standard FDDI-grade MMF; up to 300m on 2000MHz x km MMF (OM3); and up to 400m on 4700MHz x km MMF (OM4).Power consumption: 1W.Hot-swappable, plugs into an Ethernet SFP+ port.Compliant with the SFP+ MSA SFF-8431 standard.Wavelength: 850nm.Form factor: Hot-swappable.MSA compliant.Commercial temperature: 32 to 158 degrees Fahrenheit.Supports digital optical monitoring capability.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.1-year manufacturer limited warranty
The Omnitron 01-01-7207 SFP optical transceiver enables a single network device to connect to a wide variety of flexible fiber and copper cable through its interchangeable, compact media connectors. It is compatible with iConverterĀ®, FlexPointā¢, OmniConverterā¢ and miConverterā¢ products to meet specific network protocols and media requirements. This transceiver supports digital diagnostic by providing enhanced diagnostic information. The compact design and the ease of interchangeability of this unit provide a flexible solution for network designs..Optical transceiver module is compatible with iConverter media converter modules, T1/E1 multiplexers and network interface devices.LC duplex 1000Base-LX network.Media type supported: Optical fiber, fiber mode supported: Single-mode, fiber optic cable standard: 9/125 ohm m.Form factor: Hot-pluggable, hot-swappable, data transfer rate: 1.25 Gbps.Compatible with FlexPoint, OmniConverter and miConverter media converter modules that support SFP transceivers.Compliant with IEEE 802.3u fast Ethernet and 802.3z gigabit Ethernet specifications.Supports operational data rates for SONET OC-3/12/48, SDH STM-1/4/16 and fiber channel x1/x2.Supports a wide variety of cable types, supports digital diagnostic capability, low EMI metal enclosure.Temperature: 0 to 50 deg C commercial, -40 to 80 deg C storage.Meets RoHS, Green, WEEE standards.Comes with 1 year warranty.Certifications and standards: Compliant with MSA SFF-8472 standard.OMNITRON SYSTEMS iConverter 1000Base-LX SFP Optical transceiver supports data transfer rate of 1 Gb/s and is suitable to use with networking applications.
Industry standard Cisco small form factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a gigabit Ethernet port or slot, linking the port with the network..Interfaces/ports: 1 x LC duplex 1000Base-LX/LH.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Cisco IE 3000 series switches, cisco 3200 series rugged routers, cisco MWR 2900 mobile wireless routers.Connectivity technology: Wired.Connectivity media: Single mode fiber 1000Base-LX/LH.Operating temperature: -40 - 185 deg F.Fiber type: SMF/MMF.Cabling type: Ethernet 1000Base-LX.Additional information: Spare product, range: 10 Km, wavelength: 1300 nm.Data transfer rate: 1 Gb/s gigabit Ethernet.Form factor: Hot swappable/plug-in.Application/usage: Data networking.SFP (mini-GBIC) transceiver module 1000 MBPS SFP single mode rugged 1000BASE-LX/LH SFP for MMF and SMF.
The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver, and it supports up to 400m link length when uses 4700Mhz KM MMF (OM3). The 10GBase-SR SFP+ module offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver.Industryās smallest 10G form factor for greatest density per chassis.Compatibility: Cisco nexus 5000 series Switches, cisco nexus 7000 series switches.Hot Pluggable.850nm VCSEL transmitter, PIN photo-detector.Maximum link length of 300m on 2000MHz/km MMF.Operating case temperature: 0 to 70 Ā°C.Additional information: Spare product, distance 300 m.Form factor: Plug-in module.Application/usage: Data networking.90 days limited warranty.The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver. SFP+ transceiver module supports a link length of 26 m on standard fiber distributed data interface (FDDI)-grade multimode fiber (MMF).
The SGFEB provides a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment. Deploying fiber into today's networks provides the ability to transmit data over significantly longer distances than is possible on copper. Fiber also protects your data from external sources of noise and interference, improving network performance..Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over optical fiber cable
AddOnĀ® Juniper transceiver easily complaints with all networking product lines and can be mixed or deployed with other OEM transceivers for seamless network performance. Transceiver plug can be easily plugged into a gigabit ethernet slot..1 x 1000base-SX, gigabit ethernet.Ethernet technology: Gigabit Ethernet.Form factor: Plug-in module.Application/Usage: Data networking, optical network.Max transfer distance: 1800'.Optical wave length: 850 nm.Compatibility: QFX3500 switch.AddOnĀ® Juniper transceiver operates at 850 nm over multi-mode fiber and is a hot-swappable input/output device.
The NETGEAR AGM731F fiber 1000BASE-SX SFP GBIC module expands the capabilities of your existing switch, enabling it to accept fiber-optic connections. The module is compact in size and plugs in easily, so you can upgrade your system in less than a minute. It features a single port, so you can extend network coverage across a larger area..Interfaces/ports: 1 x LC 1000Base-SX LAN.Dimensions: 0.4"(H) x 1/2"(W) x 2.6"(D).Compatibility: Adds fiber optic connectivity to the GSM7324, meets SFP GBIC standard for use with any SFP GBIC compliant slot 1000BASE-SX connectivity.Connectivity technology: Wired.Connectivity media: 62.5 um multi mode fiber 1000Base-SX, 50 um 1000Base-SX.Operating temperature: 32 - 104 deg F.Humidity: 10 - 90%.MTBF: 5,083,574 hours.Module support: Mini-GBIC, SFP.Data transfer rate: 1 Gb/s.Performance class: Gigabit ethernet.Form factor: Plug-in module.Application/usage: Data networking.Expansion slots: 4 (total)/4 (free) x SFP (mini-GBIC).5 years limited warranty.NETGEAR AGM731F Fiber 1000BASE-SX SFP GBIC Module - High-Speed Connections
The Ciscoā¢ GLC-TE= Gigabit Ethernet SFP transceiver module is suitable for 7700 F3-series, 9372PX and 9396PX Cisco Nexus series switches. This SFP transceiver module has RJ-45 1000Base-T network LAN ports for connectivity. It supports twisted pair media for reliable data transfer..SFP transceiver module for 7700 F3-series, 9372PX and 9396PX Cisco Nexus series switches.Color: Silver.Connectors: One RJ-45 1000Base-T network LAN.Media type supported: Twisted pair.Ethernet technology: Gigabit Ethernet
The Cisco Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers high-density and low-power Ethernet connectivity for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The Cisco QSFP dual-rate bi-directional (BiDi) transceiver is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF)..Uses multimode fiber (MMF) as the fiber cable type and features a duplex LC optical connector for connectivity..QSFP transceivers enable high-speed 40G/100G Ethernet over multimode fiber using BiDi tech for short-reach data center connectivity..Supports data transfer rates of up to 100,000 Mbps (100 Gbps) and 40,000 Mbps (40 Gbps)..Maximum distance of 100 meters over OM4 or OM5 multimode fiber for 100G Ethernet and 150 meters over OM4 for 40G Ethernet..Supports 40 Gigabit Ethernet (40GbE) and 100 Gigabit Ethernet (100GbE) over multimode fiber using a duplex LC connector..Has a typical power consumption of approximately 3.5 watts..Hot-swappable, allowing it to be inserted or removed from a compatible device without powering down the system..MSA (Multi-Source Agreement) compliant, ensuring interoperability with other QSFP28-compliant devices across various platforms..Operates at two wavelengths: 855 nm and 908 nm, using short-range bidirectional optics over multimode fiber.
Dellā¢ SonicwallĀ® 1000Base-SX SFP Short haul transceiver module eliminates potential points of failure associated with separate multiple vendor solutions. Module has SFP mini-GBIC compatible slots and supports wired connectivity technology..Interfaces/ports: 1 x Ethernet 1000Base-SX network.Media & performance: Connectivity media: Optical Fiber 1000Base-SX, Data Transfer rate: 1 Gb/s.Ethernet technology: Gigabit Ethernet.For SuperMassive E10000 Series, SuperMassive 9000 Series.Application/usage: Data Networking, optical network.Form factor: SFP.Warranty: 1 year limited.Dellā¢ SonicwallĀ® 1000Base-SX SFP Mini-GBIC short haul transceiver module is used in data networking as well as optical network and has a data transfer rate of 1 Gb/s.
ACP's industry-standard 10Gbase-SR SFP+ is a hot-swappable input/output device that plugs into a gigabit Ethernet slot, linking the port with the fiber-optic network..Interfaces/ports: 1 x 10GBase-SR, 1 x LC/PC duplex 10GBase-SR network.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Cisco Nexus 5000 series, 7000 series switches.Connectivity technology: Wired.Connectivity media: 62.5 um, 50 um multi mode fiber 10GBase-SR.Humidity: 0% - 95%.Operating temperature: 32 -158 deg F.Enclosure type: Plug-in module.Data transfer rate: 10 Gb/s gigabit Ethernet.Form factor: Hot-swappable.Application/usage: Data networking.3 years limited warranty.Transceiver module compatible 10GBase-SR SFP+ sub watt power consumption and its excellent EMI performance allow system design with high port density.
AddOnĀ® 1000BASE-LX 1310nm 10km SMF SFP Module is built to meet or exceed the OEM's specifications and supports optical networking. Module can be deployed with 3rd party transceivers for seamless network performance and features SMF connectivity..Interface/ports: 1 x LC 1000Base-LX/LH network.Compatibility: Catalyst Express 500, Catalyst Express 520, ME 3400, ME 3600X, ME 3800X, ME 4900 Series, Catalyst 2940, 2950, 2960, 2960-S, 2960-C, 2970, 2975, 3560, 3560-E, 3560-X, 3560-C, 3750, 3750-E, 3750-X Series.Connectivity technology: Wired.Form factor: Hot-swappable.Connectivity media: Single-mode optical fiber 1000Base-LX/LH, multi-mode optical fiber 1000Base-LX/LH.Max transfer distance: 10km.Data transfer rate: 1 Gbps gigabit Ethernet.1310 nm wavelength.SFP module is a Cisco compatible SFP transceiver that operates at 1310nm over single-mode fiber, with a maximum reach of 10km connected via a LC connector, built to meet or exceed the OEM's specifications, and comply with MSA.Hot-swappable input/output device that plugs into a gigabit Ethernet slot, linking the port with the fiber-optic network.Warranty: Lifetime limited.AddOnĀ® 1000BASE-LX 1310nm 10km SMF SFP Module is supported with DOM to access real-time operating parameters and is hot swappable.
Ciscoā¢ 1000BASE-EX SFP Transceiver module is hot-swappable and supports a 1310 nm wavelength signaling. Module operates on standard SMF optic link that spans up to a distance of 40 km..Interface/ports details: 1 x 1000Base-EX network.Media and performance: G.652 micrometer single mode optical fiber.Ethernet technology: 1 Gbps gigabit ethernet.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Application/usage: Data networking.Form factor: Hot swappable.Wavelength: 1310-nm, Reach: 40 km.Compatibility: Cisco ME 3400 series ethernet access switches, Cisco catalyst 3750 metro series switches.Weight: 2.65 oz..Warranty: 90 days limited.Ciscoā¢ 1000BASE-EX SFP Transceiver module is designed to connect a gigabit ethernet port to a network and has dual LC/PC single mode connectors.
The Transition NetworksĀ® TN-GLC-SX-MM 1000Base-SX Gigabit Ethernet SFP transceiver module is suitable for Gigabit Ethernet switches and routers, fiber channel switch infrastructure, xDSL applications and metro edge switching. This hot pluggable transceiver module with LLC 1000Base-SX interface, transfers data at the rate of 1.25 Gbps up to 550 m distance over multi-mode fiber media at a wavelength of 850 nm. This transceiver module helps to install in any SFP port allowing for 1000Base-SX interface to the network through the SFP connector..Hot-pluggable SFP transceiver module is suitable for Gigabit Ethernet switches, routers, fiber channel switch infrastructure and xDSL applications.Dimensions: 0.33"H x 0.52"W x 2.18"D.Supports multi-mode fiber (MMF) connection media.Interfaces/ports: One LC 1000Base-SX.Ethernet technology: Gigabit Ethernet.Maximum data transfer rate: 1.25 Gbps.Reach: 550 m.Wavelength: 850 nm.Media type supported: Optical fiber.Link budget: 8.5 dB.Power: 3.3 V, Power consumption: 0.66 W.Temperature range: 0 - 70 deg C operating, 40 - 85 deg C storage.Fiber optic cable standard: 62.5/125 u m, 50/125 u m.SFP footprint LC optical transceiver.Has been designed to install in any SFP port while allowing for 1000Base-SX interface to the network through the SFP connector.Meets MSA, IEC-60825, FDA 21, CFR 1040.10 and 1040.11, IEEE 802.3 2003, ANSI X3.297-1977 certifications and standards.Comes with lifetime warranty
It installs in a Mini-GBIC compliant slot and features a duplex LC connector that is compatible with 850nm multi-mode fiber cables..Type of Product/Use: Transceiver.Dimensions/Size: 2.2 x 0.5 x 0.3 inch.True color: Silver.850nm Wavelength for Multi-Mode Fiber.Connectivity media: 62.5/125 microm multi-mode optical fiber, 50/125 microm multi-mode optical fiber.Max transfer distance: 721.78 ft 62.5/125 microm, 902.23 ft 62.5/125 microm, 1640.42 ft 50/125 microm, 1804.46 ft 50/125 microm optical fiber.Data transfer rate: 1 Gbps gigabit-ethernet.Transmitter spec: Power: -9.5 to -4 dBm, Receiver spec: sensitivity: -20 to -17dBm, Input power: -20 to -17 dBm.Stress sensitivity: 50/125 um: -13.5 dBm, 62.5/125 um: -12.5 dBm, Wavelength: 850 nm (850nm TYP., 830-860nm) MMF.Environmental condition: Operating temperature: 32 - 104 deg F, Storage temperature: -4 -158 deg F Operating humidity: 0% to 85% non-condensing.Modular bandwidth for MMF: 62.5/125um MMF at 160 MHz/km, up to 220m, 62.5/125um MMF at 200 MHz/km, up to 275m, 50/125um MMF at 400 MHz/km, up to 500m, 50/125um MMF at 500 MHz/km, up to 550m.Provides a simple way to add Gigabit functionality to your Linksys switch.Gigabit fiber is often-used to connect two switches together.Technology used depends on the distance between the two switches.SX module uses 850 nanometer wavelength light in multimode fiber-optic cables, and can achieve distances up to 220 or 550 meters, depending on the fiber used.The Gigabit Ethernet SX Mini-GBIC SFP Transceiver from Cisco is an expansion module that adds high-density fiber connectivity to compatible devices.
It installs in a Mini-GBIC compliant slot and features a duplex LC connector that is compatible with 850nm multi-mode fiber cables..Type of Product/Use: Transceiver.Dimensions/Size: 2.2 x 0.5 x 0.3 inch.True color: Silver.850nm Wavelength for Multi-Mode Fiber.The Gigabit Ethernet SX Mini-GBIC SFP Transceiver from Cisco is an expansion module that adds high-density fiber connectivity to compatible devices.
The Dellā¢ 407-BBOR SFP mini-GBIC network transceiver is perfect for data networking and optical network applications. It features one LC duplex 1000Base-SX network interface and supports Gigabit Ethernet technology for high-speed data transmission. This network transceiver transmits data at a rate of 1 Gbps. It offers data transmission over multi mode optical fiber media up to a range of 550 m at 850 nm wavelength. This transceiver is compatible with Dell Networking N2048, N4000, N4032F, N4064F, N2024P switches, Dell PowerConnect 2848, 5524P, 5548p, 6224F, 6248P and 7024F switches..SFP network transceiver for data networking and optical network applications.Interfaces/ports: One LC duplex 1000Base-SX network.Data transfer rate: 1 Gbps.Ethernet technology: Gigabit Ethernet.Wavelength: 850 nm.Media type supported: Multi-mode optical fiber.Compatibility: Dell Networking N2048, N4000, N4032F, N4064F, N2024P switches, Dell PowerConnect 2848, 5524P, 5548p, 6224F, 6248P, 7024F switches.Max transfer distance: 550 m
The Allied Telesisā¢ AT-SPSX-90 SFP (mini-GBIC) module is perfect for data networking and optical network. This multi-mode module with SX network works based on 1000Base-SX Gigabit Ethernet technology. The hot-swappable module supports a maximum distance of 1804.46' and maximum data transfer rate of 1.25 Gbps. It has 1 x LC 1000Base-SX network interface for external connections. This module supports 62.5/125 mu m and 50/125 mu m optic fiber..Hot-pluggable SFP (miniGBIC) module is perfect for data networking.Connectors: 1 x LC.Ethernet technology: Gigabit Ethernet.Network technology: 1000Base-SX.Data transfer rate: 1 Gbps.Media type: 62.5/125 mu m, 50/125 mu m multi-mode optical fiber.Maximum reach: 220m/550m.Wavelength: 850 nm.Meets Eco, RoHS, WEEE, REACH standards
This Cisco-compatible SFP+ transceiver provides 100/1000/10000Base throughput up to 98' over Copper. It is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy-to-install, hot-swappable transceiver has been programmed, uniquely serialized, and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant..Copper SFP+ transceiver module is a hot-swappable SFP transceiver guaranteed to be 100% compatible with the equivalent Cisco transceiver.Hot-swappable transceiver has been programmed, uniquely serialized, and data-traffic and application tested to ensure that it will initialize and perform identically.Provides 100/1000/10000BASE throughput up to 30m over copper.Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters.This transceiver is Trade Agreements Act (TAA) compliant
Cisco 1000BASE-LX SFP (mini-GBIC) Transceiver easy-to-install module that provide a simple way to add fiber connectivity or to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro Series switches. The transceiver available for single-mode fiber-optic cabling and can support distance up to 10 kilometers..Type of Product/Use: Transceiver.Dimensions/Size: 0.5 x 0.3 x 2.2 inch.True color: Silver.1000Base-LX.1 x LC Duplex Connector.Single-Mode Fiber (SMF).10 km (6.2 miles) Max..1000 Mbps Transfer Rate.The MGBLX1 SFP Transceiver from Cisco is an easy-to-install module that provides a simple way to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro Series switches.
The AddOn transceiver module SFP+ allows you to transfer data at up to 1 Gbps through your Ethernet connection. The device is hot swappable, so you can plug it in or remove it without having to reset your system. The duplex LC connector interface works well with wired connections for a solid line to the network..Interfaces/ports: 1 x 1000Base-SX, 1 x LC 1000Base-SX.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: WS-SUP720, WS-SUP32 -8GE-3B, WS-SUP32 -10GE-3B, WS-X6724-SFP, WS-X6748-SFP.Connectivity technology: Wired.Connectivity media: 62.5/50 um multi mode fiber 1000Base-SX.Humidity: 0% - 95%.Operating temperature: 0 - 70 deg C.Digital diagnostic monitor interface compatible with SFF-8472.Hot pluggable.Data transfer rate: 1 Gb/s gigabit Ethernet.Duplex LC connector interface.Form factor: Hot-swappable.Application/usage: Data networking.2 years limited warranty.Monaural; choice of 3 wearing styles (over the head, over the ear and behind the neck).Noise-canceling microphone eliminates background noise and focuses on your voice.Convertible design.Multipoint.1-year mfr. limited warranty.Safety Data Sheet.AddOn Transceiver Module SFP+ - Hot-Swappable Data Networking
The 1000Base-LX Industrial SFP Single-Mode LC Module, model TI-MGBS10, is designed to operate within a wide temperature range and is well suited for industrial environments. This SFP module works with standard SFP slots found on industrial switches and fiber converters. The TI-MGBS10 is compatible with Duplex LC fiber connector types and supports gigabit single-mode fiber connections at distances of up to 10 kilometers (6.2 miles). DEVICE INTERFACE: SFP MSA Compliant; LC duplex connector NDAA + TAA COMPLIANT: With our NDAA and TAA compliant Modules, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only) LIFETIME PROTECTION -We stand by the quality of our products. The TI-MGBS10 1000Base-LX Industrial SFP Single-Mode LC Module (10km) is secured with Lifetime Manufacturer Protection from TRENDnet. (U.S. and Canada Only) FIBER APPLICATIONS: Long distance fiber networking for industrial, manufacturing, and corporate / education campus applications FIBER MODE / DISTANCE: Single-Mode transceiver spans distances up to 10km (6.2 miles) and supports up to 1.25Gbps COMPATIBILITY: Hot-pluggable with a MSA compliant SFP slot and compatible with fiber cables with LC-type duplex connectors OPERATING TEMPERATURE: Rated for an operating temperature range of -40Ā°- 85 Ā°C (-40Ā° - 185 Ā°F) Supports 1310nm single-mode network transmissions; Duplex LC optical interface, Low power consumption FIBER INTERFACE: LC-type duplex connector More from the Manufacturer.NDAA / TAA compliant (U.S. and Canada only).Compliant with IEEE 802.3z Gigabit Ethernet.Supports 1310nm single-mode network transmissions.Wide operating temperature range of -40Ā°- 85 Ā°C (-40Ā° - 185 Ā°F)
The Dellā¢ Networking 407-BBOU, SFP+ transceiver module provides 10GbE connectivity with a maximum reach up to 300 m, at a wavelength of 850 nm, using SR connector. This transceiver module is perfect for dell networking switches..SFP+ transceiver.Interfaces/port: LC duplex.Ethernet technology: 10 Gigabit Ethernet.Media type supported: Multi-mode optical fiber.Wavelength: 850 nm.Maximum data transfer rate: 10 Gbps.Operating range: 300 m.Compatibility: Networking N4000 N4032/N4000 N4032F/N4000 N4064/N4000 N4064F, N-Series N2024/N2024P/N2048/N3024/N3024F/N3024P, S5000.Form factor: Plug-in module.MSA, RoHS compliant.SFP+ transceiver provides 10GbE connectivity up to 300 m and is compatible with Networking N4000 N4032/N4000 N4032F/N4000 N4064.
This AvagoĀ® AFBR-5715ALZ compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with AvagoĀ®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Multi-mode fiber mode support for feasible connectivity with added productivity
This Cisco MerakiĀ® MA-SFP-1GB-TX compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It can operate at temperatures between 0 and 70C. This TX module supports 10/100/1000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco MerakiĀ®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable.Up to 10x faster than standard Ethernet connection and provides high-performance.SFP with data networking application/usage for maximum dependability and convenience
The Transition Networks TN-GLC-xxx series small form factor pluggable (SFP) transceiver modules are designed to install in any SFP port allowing for 1000Base-T, 1000Base-SX or 1000Base-LX interfaces to the network through the SFP connector. The TNGLC- xxx transceivers are Cisco compatible and are designed for bidirectional serial-optical data communication such as Gigabit Ethernet or fiber channel at speeds up to 1.25 Gbps..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity
The 1000Base-SX Industrial SFP Multi-Mode LC Module, model TI-MGBSX, is designed to operate within a wide temperature range and is well suited for industrial environments. This SFP module works with standard SFP slots found on industrial switches and fiber converters. The TI-MGBSX is compatible with Duplex LC fiber connector types and supports gigabit multi-mode fiber connections at distances of up to 550 m (1804 ft.). Fiber Applications Long distance fiber networking for industrial, manufacturing, and corporate/education campus applications. Fiber Mode / Distance Multi-Mode transceiver spans distances up to 550 m (1804 ft.) and supports up to 1.25 Gbps. Compatibility Hot-pluggable with a MSA compliant SFP slot and compatible with fiber cables with LC-type duplex connectors. Compliant with IEEE 802.3z Gigabit Ethernet ANSI Fiber Channel compliant Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant Wide operating temperature range of -40Ā°- 85 Ā°C (-40Ā° - 185 Ā°F) Supports data rates of up to 1.25 Gbps Transmission distance of up to 550 m (1804 ft.) Low Electromagnetic Interference (EMI) design Supports 850 nm multi-mode network transmissions Duplex LC optical interface Low power consumption NDAA / TAA compliant Lifetime Warranty More from the Manufacturer.NDAA / TAA compliant.Duplex LC optical interface.Low power consumption.Supports 850 nm multi-mode network transmissions
Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.SFP (mini-GBIC) with data networking application/usage for maximum productivity and usability
Compliant with IEEE 802.3ab Gigabit Ethernet Small Form-Factor Pluggable (SFP) and Multi-Source Agreement (MSA) compliant Supports data rates of up to 1.25Gbps Transmission distance of up to 100m (328 ft.) Hot-Pluggable RJ-45 connector Lifetime TRENDnet Manufacturer's Warranty TRENDnet's 1000BASE-T RJ-45 Copper SFP Module, model TEG-MGBRJ, converts a standard SFP slot into a RJ-45 gigabit port for additional copper connectivity. This SFP module works with standard SFP slots commonly found in network switches and fiber media converters. Save on equipment costs by repurposing a switch's unused SFP slots for copper connectivity. RJ-45 Copper SFP Take advantage of unused SFP slots and repurpose them with RJ-45 copper Ethernet connectivity. Gigabit Speeds 1000BASE-T RJ-45 copper SFP spans distances up to 100m (328 ft.) and supports up to 1.25Gbps. Compatibility Compatible with a MSA compliant SFP slot and 1000BASE-T RJ-45 connections. PACKAGE CONTENTS TEG-MGBRJ Quick Installation Guide NDAA / TAA compliant (U.S. and Canada only) More from the Manufacturer.Supports data rates of up to 1.25Gbps.Lifetime TRENDnet Manufacturer's Warranty.RJ-45 connector.Hot-Pluggable
Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance.Gigabit Ethernet port for ultra-fast network speeds.With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable
Optical Transceivers Optical transceivers are an integral part of fiber optic networks for data communication, Ethernet LAN, and Fiber Channel applications. ENET offers the most diverse and comprehensive compatible transceivers available. ENET conducts the most comprehensive validation and testing procedures in the industry. All ENET OEM compatible transceivers are certified for functionality, reliability, and performance under rigorous testing parameters. Every transceiver is RoHS and MSA (Multi-Source Agreement) compliant and meet IEEE Standards for optimum performance and reliability. All ENET transceivers are built using Tier 1 grade components and lasers and individually tested in their intended application and are guaranteed compatible with identical functionality to OEM products. Our test lab contains the most extensive and complete compilation of network switches, routers, and devices for development, testing, and support. By having these test devices in-house, it guarantees 100% compatibility and reliability in all of today's most popular network platforms. All ENET transceivers are backed by an industry-leading lifetime replacement warranty and technical support..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Multi-mode fiber mode support for feasible connectivity with added productivity
Optical Transceivers Optical transceivers are an integral part of fiber optic networks for data communication, Ethernet LAN, and Fiber Channel applications. ENET offers the most diverse and comprehensive compatible transceivers available..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Single-mode fiber mode support for feasible connectivity with added productivity
SFP-SX-D - LC 850nm 550m (Multi-Mode) Gigabit Transciever DDMI Support.Industry standard compliance.SFP MSA (Multi-Source Agreement) compliance.Low power dissipation.Hot-pluggable with maximum flexibility
This AvagoĀ® ABCU-5710RZ compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It can operate at temperatures between 0 and 70C. This TX module supports 10/100/1000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with AvagoĀ®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-TX technology, get up to 1000Mbps data transfer rate over twisted pair cable.Gigabit Ethernet port for ultra-fast network speeds.Hot-swappable form factor for added reliability and dependability.SFP (mini-GBIC) with data networking application/usage for maximum dependability and convenience
This CiscoĀ® MGBSX1 compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with CiscoĀ®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building
This BrocadeĀ® (Formerly) E1MG-LX-OM compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with BrocadeĀ® (Formerly). It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Single-mode fiber mode support for reliable, fast transfer, sharing, and access to the data and information
eNet Components offers a full range of compatible transceiver solutions for many of the major manufacturers of network equipment. Our eNet Optics line of compatible transceivers provide a cost-effective, 100% compatible solution to OEM products at a fraction of the price without sacrificing quality or functionality. Our compatible line of transceivers includes GBIC, SFP, SFP+, XFP, X2, and XENPAK products. All of our compatible transceiver solutions are MSA (Multi-Source Agreement) compliant for form, fit, and function in all MSA compliant switching and routing platforms. All products meet IEEE Standards for optimum performance and reliability and are all uniquely serialized to ensure their compatibility and functionality in their specific networking environment. All of our compatible transceiver products are guaranteed to be 100% compatible and are backed by an industry-leading lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity
This HuaweiĀ® SFP-GE-T-H compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It can operate at temperatures between 0 and 70C. This TX module supports 10/100/1000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with HuaweiĀ®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable.Gigabit Ethernet port for ultra-fast network speeds.SFP with data networking application/usage for reliability and maximum efficiency
ENET offers the most complete line of OEM compatible transceivers spanning across 50 manufacturers. ENET compatible optics provide a cost-effective, 100% guaranteed compatible solution compared OEM products at a fraction of the price without sacrificing quality or functionality. ENET offers unparalleled quality by performing the most complete and comprehensive testing in the industry. Each optic is individually tested at 100% capacity in the latest network traffic generating equipment for latency, packet loss, frame errors, transmit power (Tx) and receive power (Rx). All ENET transceivers are individually serialized and programmed for their specific application and undergo testing in those specific platforms to ensure 100% compatibility and functionality. Programming involves specific values and algorithms to ensure proper operating software recognition and seamless integration with original OEM and other NON-OEM transceivers. ENET compatible transceiver solutions meet IEEE Standards for optimum performance and reliability as well as RoHS and MSA (Multi-Source Agreement) compliant for form, fit, and function in all MSA compliant switching and routing platforms. All ENET transceivers are backed by a lifetime warranty and are available in TAA compliant versions..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building
This TRENDnetĀ® TEG-MGBLX compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with TRENDnetĀ®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance
Ciscoā¢ Downstream SFP module is a hot-swappable I/O device that plugs into a gigabit Ethernet slot and linking it with the fiber-optic network. Module supports data networking applications and offers data transfer rate of 1 Gb/s..1 x LC 1000Base-BX.0.3"(H) x 0.5"(W) x 2.2"(D).Cisco ME 2400, Catalyst 2960 series, Cisco ME 3400, Catalyst 3560 series, Catalyst 3750 series, Catalyst 4500 series, Catalyst 4900 series, Catalyst 6500 series.Wired.Connectivity media: G.652 microm single-mode optical fiber.Form factor: Hot-swappable.Management: Digital optical monitoring (DOM) functions, Application/usage: Data networking.Data transfer rate: 1 Gbps gigabit ethernet.Operating transmission range: Up to 10 km.Small form-factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet-port or slot, linking the-port with the network.1490-nm TX/1310-nm RX wavelength.Warranty: 90 days limited.Ciscoā¢ Downstream SFP module has the ability to go up to 10 km over G.652 microm single-mode optical fiber and features digital optical monitoring functions.
The Opengear 1000Base-LX/LH mini-GBIC SFP transceiver module operates at 1 Gbps and offers optical links up to 10 km long via single-mode fiber cable at a wavelength of 1310 nm. It is compatible with IM7200 infrastructure manager for data networking..SFP transceiver module for data networking, optical network and compatible with IM7200 infrastructure manager.Interfaces/ports: One 1000Base-LX/LH network.Ethernet technology: Gigabit Ethernet, Maximum data transfer rate: 1 Gbps, Max transfer distance: 10 km, Optical wave length: 1310 nm.Media type supported: Optical fiber, Fiber mode supported: Single-mode
This BrocadeĀ® (Formerly) E1MG-SX-OM compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with BrocadeĀ® (Formerly). It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical Fiber media support ensures maximum convenience and great usability.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building
Improve your network performance with the Transition Networks TN-GLC-SX-MMD SFP Module. Built for short-distance connectivity, this module supports 1000Base-SX technology for up to 1 Gbps data transfer over optical fiber. Multi-mode fiber compatibility ensures efficient data transmission for audio/video applications within buildings..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building
eNet Components offers a full range of compatible transceiver solutions for many of the major manufacturers of network equipment. Our eNet Optics line of compatible transceivers provide a cost-effective, 100% compatible solution to OEM products at a fraction of the price without sacrificing quality or functionality. Our compatible line of transceivers includes GBIC, SFP, SFP+, XFP, X2, and XENPAK products. All of our compatible transceiver solutions are MSA (Multi-Source Agreement) compliant for form, fit, and function in all MSA compliant switching and routing platforms. All products meet IEEE Standards for optimum performance and reliability and are all uniquely serialized to ensure their compatibility and functionality in their specific networking environment. All of our compatible transceiver products are guaranteed to be 100% compatible and are backed by an industry-leading lifetime warranty..With 10/100/1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.SFP (mini-GBIC) with data networking application/usage for reliability and maximum efficiency
This Cisco MerakiĀ® SFP-1GB-LX10 compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco MerakiĀ®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution
HPE is the global edge-to-cloud company built to transform your business. How? By helping you connect, protect, analyze, and act on all your data and applications wherever they live, from edge to cloud, so you can turn insights into outcomes at the speed required to thrive in today's complex world..This short range, fibre channel, SFP28 transceiver is designed for HPE MSA storage.Supports up to 25 Gbps of data transfer rate.Four transceivers per pack.Dimensions: 8"H x 0.21"W x 3"D