Single-Mode SFP Transceivers

Cisco™ 1000BASE-BX10 Upstream SFP module is a hot-swappable input/output device that plugs into a gigabit ethernet port or slot. SFP is compatible with Cisco™ ME 2400, catalyst 2960 series, Cisco™ ME 3400 and catalyst 3560 series..10/100/1000Base-T Gigabit Ethernet.Form factor: Hot-swappable, spare product, 1310-nm TX/1490-nm RX wavelength, operating transmission range up to 10 km.Interfaces: 1 x LC 1000Base-BX.Connectivity media: G.652 micrometer single-mode optical fiber.Management: Digital optical monitoring (DOM) functions.Application/usage: Data networking.Compatibility: Cisco ME 2400, Catalyst 2960 series, Cisco ME 3400, Catalyst 3560 series, Catalyst 3750 series, Catalyst 4500 series, Catalyst 4900 series, Catalyst 6500 series.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Warranty: 90 days limited.Cisco™ 1000BASE-BX10 Upstream SFP module can be used for data networking and has 1 Gb/s data transfer rate.

This Cisco Meraki® MA-SFP-10GB-LR compatible SFP+ transceiver provides 10GBase-LR throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco Meraki®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

This ZyXEL® SFP-LX-10-D compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with ZyXEL®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical Fiber media support for a dependable and productive connectivity.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution.SFP (mini-GBIC) with data networking application/usage for maximum productivity and usability

This Allied Telesis® AT-SPLX10/I compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Allied Telesis®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical Fiber media support for efficient and reliable connectivity.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

Cisco™ Downstream SFP module is a hot-swappable I/O device that plugs into a gigabit Ethernet slot and linking it with the fiber-optic network. Module supports data networking applications and offers data transfer rate of 1 Gb/s..1 x LC 1000Base-BX.0.3"(H) x 0.5"(W) x 2.2"(D).Cisco ME 2400, Catalyst 2960 series, Cisco ME 3400, Catalyst 3560 series, Catalyst 3750 series, Catalyst 4500 series, Catalyst 4900 series, Catalyst 6500 series.Wired.Connectivity media: G.652 microm single-mode optical fiber.Form factor: Hot-swappable.Management: Digital optical monitoring (DOM) functions, Application/usage: Data networking.Data transfer rate: 1 Gbps gigabit ethernet.Operating transmission range: Up to 10 km.Small form-factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet-port or slot, linking the-port with the network.1490-nm TX/1310-nm RX wavelength.Warranty: 90 days limited.Cisco™ Downstream SFP module has the ability to go up to 10 km over G.652 microm single-mode optical fiber and features digital optical monitoring functions.

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution.SFP (mini-GBIC) with data networking application/usage for maximum dependability and convenience

The Opengear 1000Base-LX/LH mini-GBIC SFP transceiver module operates at 1 Gbps and offers optical links up to 10 km long via single-mode fiber cable at a wavelength of 1310 nm. It is compatible with IM7200 infrastructure manager for data networking..SFP transceiver module for data networking, optical network and compatible with IM7200 infrastructure manager.Interfaces/ports: One 1000Base-LX/LH network.Ethernet technology: Gigabit Ethernet, Maximum data transfer rate: 1 Gbps, Max transfer distance: 10 km, Optical wave length: 1310 nm.Media type supported: Optical fiber, Fiber mode supported: Single-mode

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Optimize the network's performance with 10 Gigabit Ethernet connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical Fiber media support for a dependable and productive connectivity.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Optimize the network's performance with 10 Gigabit Ethernet connectivity.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution.SFP+ with data networking application/usage for maximum dependability and convenience

This Avago® AFCT-5710PZ compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Avago®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical Fiber media support for efficient and reliable connectivity.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

WatchGuard WG9020 Firebox M-Series 2-Port 10GbE SFP+ Expansion Module The WatchGuard Firebox M-Series 2-Port 10-Gigabit SFP+ Expansion Module allows you to add more interfaces to your M-Series Firebox appliance (sold separately). It is easily installed in the interface slot on your 3rd Gen Firebox (see specifications tab for compatibility)..WG9020 module have Single Mode for Fiber cable and LC (Lucent Connector) is for fiber connector..Network Transceiver is SFP+ Transceiver Module Used for 10 Gigabit Ethernet connectivity..The WG9020 module supports a data transfer rate of up to 10 Gbps, (10,000 Mbps), 10,000,000 Kbps (Kilobits per second) over optical fiber..This module supports a maximum distance of up to 10,000 meters when using single-mode fiber..The WG9020 module Supports 10 Gigabit Ethernet.Power Consumption for this module is 2.5 watts..This module is msa compliant..It supports MTBF 1,000,000 hours..The WG9020 module operates at a wavelength of 1310 nm.

This Finisar® FTLF1318P3BTL compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Finisar®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Single-mode fiber mode support for feasible connectivity with added productivity

This Sonicwall® 01-SSC-9790 compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Sonicwall®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-ZX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.SFP (mini-GBIC) with data networking application/usage for reliability and maximum efficiency

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Optimize the network's performance with 10 Gigabit Ethernet connectivity.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.SFP+ with data networking application/usage for reliability and maximum efficiency

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Up to 10x faster than standard Ethernet connection and provides high-performance.Optical Fiber media support for efficient and reliable connectivity.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution.SFP (mini-GBIC) with data networking application/usage for reliability and maximum efficiency

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Gigabit Ethernet port for ultra-fast network speeds.Optical Fiber media support for efficient and reliable connectivity.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance.SFP (mini-GBIC) with data networking application/usage for maximum dependability and convenience

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Single-mode fiber mode support for feasible connectivity with added productivity

This Accedian® 7SN-100 compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Accedian®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Optimize the network's performance with 10 Gigabit Ethernet connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Single-mode fiber mode support for dependable connectivity with maximum usability

This Cisco Meraki® MA-SFP-1GB-LX10 compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco Meraki®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Single-mode fiber mode support for dependable connectivity with maximum usability

This Hirschmann M-SFP-LX/LC compatible SFP transceiver provides 1000Base-LX throughput up to 20km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Hirschmann. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Single-mode fiber mode support for feasible connectivity with added productivity

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution.SFP (mini-GBIC) with data networking application/usage for maximum dependability and convenience

This Calix® 100-01662 compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Calix®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

This Finisar® FTLF1518P1BTL compatible SFP transceiver provides 1000Base-ZX throughput up to 70km over single-mode fiber (SMF) using a wavelength of 1550nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Finisar® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-ZX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Single-mode fiber mode support for dependable connectivity with maximum usability

This HP® JF832A compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with HP®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-LX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Fast Ethernet technology - An ideal solution for extending network connections to conference rooms, labs, lobbies and department workgroups.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Single-mode fiber mode support for feasible connectivity with added productivity

This HP® J9143B compatible SFP transceiver provides 1000Base-BX throughput up to 20km over single-mode fiber (SMF) using a wavelength of 1310nmTx/1490nmRx via an LC connector. This bidirectional unit must be used with another transceiver or network appliance of complementing wavelengths. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with HP®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-BX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

ENET Solutions, Inc. offers the most complete line of OEM compatible network peripherals spanning across more than 50 manufacturers. We specialize in OEM compatible optics, direct-attach cables (AOC/DAC), fiber and copper patch cables, media converters, along with switch, router, and server memory. ENET compatible products provide a cost-effective, 100% guaranteed compatible solution compared to OEM products at a fraction of the price without sacrificing quality or functionality. ENET offers unparalleled quality by performing the most complete and comprehensive testing in the industry. Each optic is individually tested at 100% capacity in the latest network traffic generating equipment for latency, packet loss, frame errors, transmit power (Tx) and receive power (Rx). All ENET transceivers are individually serialized and programmed for their specific application and undergo testing in those specific platforms to ensure 100% compatibility and functionality. Programming involves specific values and algorithms to ensure proper operating software recognition and seamless integration with original OEM and other NON-OEM transceivers. ENET compatible transceiver solutions meet IEEE Standards for optimum performance and reliability as well as RoHS and MSA (Multi-Source Agreement) compliant for form, fit, and function in all MSA compliant switching and routing platforms. All ENET products are backed by a lifetime warranty and are available in TAA compliant versions..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Optimize the network's performance with 10 Gigabit Ethernet connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.SFP+ with optical network application/usage for maximum dependability and convenience

This HP® J9142B compatible SFP transceiver provides 1000Base-BX throughput up to 20km over single-mode fiber (SMF) using a wavelength of 1490nmTx/1310nmRx via an LC connector. This bidirectional unit must be used with another transceiver or network appliance of complementing wavelengths. It is guaranteed to be 100% compatible with the equivalent HP® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-BX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical Fiber media support ensures maximum convenience and great usability.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

This Ciena® XCVR-S10V31 compatible SFP+ transceiver provides 10GBase-LR throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Ciena®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 10GBase-LRL technology, enjoy up to 10Gbps data transfer rate over optical fiber cable.10 Gigabit Ethernet Ethernet technology for increasing efficiency with the quicker transfer and sharing of information.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Single-mode fiber mode support for reliable, fast transfer, sharing, and access to the data and information

Cisco™ 100Base-X small form-factor pluggable is optically interoperable with respective 100Base-X ethernet that interfaces on the same link. Plug has max transfer distance of 32810' and optical wave length of 1310 nm..1 x LC duplex 100Base-LX10.Optically interoperable with respective 100Base-X Ethernet interfaces on the same link.Connectivity technology: Wired.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D), Form factor: Hot swappable.Max transfer distance: 32810', Optical wave length: 1310 nm.Temperature: 32 -122 deg F operating.Data transfer rate: 100Mbps fast ethernet, Connectivity media: G.652 micrometer single mode optical fiber.Compatibility: Catalyst 2960, 2960-24, 2960-48, 2960G-24, 2960G-48, 2960S-24, 2960S-48, 3560, 3560-12.Application/usage: Data networking.Interchangeable with other 100BASE-X SFPs on the same line card.Certification and Standards: IEEE 802.3, IEEE 802.3ah.Cisco™ 100BASE-LX10 SFP XCVR module is a pluggable device that operates on ordinary multimode fiber-optic link and is a hot-swappable input/output device that plugs into fast ethernet ports.

This Avago® AFCT-5705PZ compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Avago®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical Fiber media support ensures maximum convenience and great usability.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Optimize the network's performance with 10 Gigabit Ethernet connectivity.Optical Fiber media support for a dependable and productive connectivity.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

This Ubiquiti® UF-SM-1G compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Ubiquiti®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

This Ciena® XCVR-A10Y31 compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Ciena®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

A dependable solution built for everyday use. AXIS 1000Base-LX Gigabit Ethernet SFP (mini-GBIC) supports SFP Great for training rooms, classrooms, conference rooms, and shared workspaces, SFP connectivity. Designed for dependable day-to-day performance in office and IT environments. Simple to integrate and dependable for daily use..Connect SFP so you can add a reliable wired network connection when Wi‑Fi isn’t enough.Store as many documents, pictures and videos as you need with 2 TB capacity.Plug-and-play setup helps you get connected quickly—ideal for quick replacements.Compact design fits easily in IT kits, travel bags, and hot-desk drawers.A dependable accessory for everyday office and IT setups—simple to use and built for daily reliability.

This Fortinet® FG-TRAN-SFP+LR compatible SFP+ transceiver provides 10GBase-LR throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Fortinet®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Lets you conveniently connect to the 10 gigabit ethernet Ethernet technology to offer maximum productivity.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Single-mode fiber mode support for feasible connectivity with added productivity

This Finisar® FTLX1672D3BCL compatible SFP+ transceiver provides 10GBase-ER throughput up to 40km over single-mode fiber (SMF) using a wavelength of 1550nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Finisar®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 10GBase-ER technology, enjoy up to 10Gbps data transfer rate over optical fiber cable.Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

This Cisco® 15327-SFP-LC-LX compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

This Accedian® 7SU-100 compatible SFP transceiver provides 1000Base-BX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1490nmTx/1310nmRx via an LC connector. This bidirectional unit must be used with another transceiver or network appliance of complementing wavelengths. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Accedian®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-BX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

This Brocade® (Formerly) E1MG-LX-A compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Brocade® (Formerly). It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical Fiber media support for a dependable and productive connectivity.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

This N-Tron® NTSFP-FXE-15 compatible SFP transceiver provides 100Base-FX throughput up to 15km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent N-Tron® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of N-Tron®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100Mbps for connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Single-mode fiber mode support for reliable, fast transfer, sharing, and access to the data and information

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance