Tripp Lite SmartPro® SMART5000XFMRXL Rack Mountable 5 kVA UPS

• Input voltage: 208 VAC single phase
• Output voltage: 120/208 VAC single phase nominal +/-5% (60 Hz)
• Power capacity: 5 kVA
• Plug/connector type: NEMA L6 30P, receptacles: 1 x NEMA L6 30R, 2 x NEMA L6 20R, 8 x NEMA 5 15/20R, Input current: 27 A
• Form factor: 3U rack mountable tower
• Interface/ports: 1 x management (RS 232) - 9 pin D Sub (DB 9), 1 x USB, EPO (emergency power off), modular slots: 1 x co mmunications slot
• UPS Input cord length: 6', efficiency: 97%, UPS housing material: steel
• Filtering: EMI / RFI, network management: SNMP manageable optional, switching time: 4 ms
• Surge energy rating: 1020 J, waveform type: pure sine wave
• Protects sensitive networking equipment from blackouts, voltage fluctuations and transient surges
• Network interfaces support simultaneous co mmunications via USB, DB9 serial and SNMPWEBCARD slot
• Output power factor: 0.9, 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status, audible alarm indicates power failure, overload and low battery conditions
• Mains power and voltage regulation LEDs offer at a glance power status information, front panel switches support self test and alarm cancel functions, 2 Switches control off/on power status and alarm cancel/self test operation
• Integrated 8 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual devices
• Certifications and standards: UL1778 (USA), CSA C22.2 No. 107.3 (Canada), NOM (Mexico), Class A (emissions)
• Includes: SMART 5000XFMRXL UPS System, PowerAlert software and cabling, mounting hardware for 4 post rackmount installation, warranty information, instruction manual
• Weight: 143.30 lbs.
• Warranty: 2 years limited, 3 years with registration

Avoid the catastrophic loss of data that comes with a loss of power by plugging your critical systems into this Tripp Lite SmartPro rack-mountable UPS. This uninterruptible power supply prevents the instant shutdown of systems plugged into the device by providing emergency power that lasts long enough for a controlled shutdown of connected systems. Through a controlled shutdown, you'll be able to save your critical data, avoiding its loss due to power failure.