1U Rack Units

Tripp Lite Single phase basic power distribution unit has NEMA 5-15P enclosure to offer added protection and can be 1U/0U vertical rack mounted. Unit has NEMA 5-15R outlet connector and offers 15 A overload protection..Single phase NEMA 5-15P 15' 15 A 120 V nominal input.120 V 50/60 Hz output.Outlet connector: 13 NEMA 5-15R.Overload protection: 15 A.1U/0U vertical rack mount.Package includes: PDU1215 rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel nut and bolt grounding lug.Reversible housing; 4 1/2" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

Rack power distribution unit with 100 - 240 V nominal input voltage and 20 A maximum input current..Power distribution unit.Dimensions: 15.28"H x 1.72"W x 3.66"D.Color: Black and silver.Nominal voltage: 100 - 240 V Input, Frequency: 50 - 60 Hz.Input current: 20 A, Regulatory derated input current: 16 A.Input receptacles: IEC-320 C20.Rack height: 1U.Certifications and standards: cUL Listed, CE, EAC, IRAM, PSE, UL Listed, VDE, REACH, RoHS.Weight: 3.3 lbs.2 years repair or replace warranty

The Dell ReadyRails Sliding Rail Kit (770-BBJS) provides a reliable mounting solution for Dell PowerEdge 1U servers. Designed for tool-less installation in square and unthreaded round holes, and tooled installation in 4-post threaded racks, this kit ensures quick setup and secure support. The sliding rails allow easy access to the server for maintenance without full removal, improving efficiency in data center environments. Constructed in durable silver finish, the kit delivers long-lasting performance while maintaining compatibility with industry-standard racks. With a lightweight design and precise engineering, it supports Dell PowerEdge models such as R310, R410, R415, R430, R630, and R640. Backed by Dell’s 1-Year Hardware Warranty, the ReadyRails Sliding Rail Kit offers dependable rack integration, streamlined installation, and convenient server management..Rack rail for mounting and servicing Dell 1U servers..Designed for rack mount in 4‑post EIA‑310 standard racks..Fits 19 in racks; for 1U chassis; kit weight approx. 6 lb..Sliding rails, mounting hardware, and installation guide..Tool‑less in square/round holes; tooled in threaded racks; smooth sliding access..Dell PowerEdge R310, R410, R415, R430, R630, R640..Dell 1‑Year Hardware Warranty..EIA‑310 rack standard compliant.

The StarTech.com® CABLMANAGERH 1U server rack cable management panel in black, ensures easy organization of cables from the front or back of your server rack. The panel with horizontal orientation, has five conveniently placed D-ring hooks that hold and guide cable bundles running vertically and horizontally. The 1U design of the panel saves rack space. The panel comes with 4 x M5 cage nuts and 4 x M5 screws..Cable management panel.Dimensions: 19"L x 1.7"W x 4"H, rack height: 1U.Comes in black color.Orientation: Horizontal.Features front and rear mount convenience.Features a combination of D-ring hooks and pass-through holes that enables you to run cables to and from your equipment through a panel and into hooks.Saves rack space with 1U design.Includes 4 x M5 cage nuts, 4 x M5 screws.RoHS compliant.Weight: 0.93 lbs..Comes with 5 years warranty

The Tripp Lite PDUMH15-ISO 1.44 kW single-phase metered PDU with isobar surge suppression, provides real-time local reporting of load level in amps and noise suppression. It features a digital display that shows output current to prevent circuit overload when additional equipment is added and has a set of three front-panel LEDs to show wiring fault, protection present and line OK status. This PDU has a rugged all-metal housing and offers rackmount installation with included mounting accessories. It is compatible with 120 VAC sine wave input. The 1U PDU features NEMA 5-15P 15 A 120 V input plug with 15' cord and 14 NEMA 5-15R outlets..Power distribution unit offers reliable and cost effective power distribution.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).Sheet metal construction for long lasting durability.Receptacles: NEMA 5-15P input and 14 x NEMA 5-15R output.Voltage: 120 VAC at 50/60 Hz input/output, Input current: 15 A.Output capacity: 1.44 kW.Input cord length: 15'.Form factor: Horizontal (1U, 2U).Offers overload and surge protection.AC suppression joule rating: 3840 J, AC suppression surge current rating: 60000 A, Clamping voltage (RMS): 140 V.Front panel LEDs: Set of three diagnostic LEDs report LINE OK (green), suppressor or wiring FAULT (red) and PROTECTION PRESENT (green) status.Storage temperature: 5 - 122 deg F (-15 - 50 deg C), Relative humidity: 5 - 95 percent non-condensing, Operating elevation: 0 - 10000'.Built-in two digit visual meter continuously reports PDU load level in amps.Offers SOBAR Network-grade AC surge and noise suppression with EMI/RFI filtering.Contains owner's manual with warranty information.Meets UL1449 3rd Edition (USA) and CSA (Canada), RoHS standards or certifications.Weight: 4.6 lbs..Comes with 2 years limited warranty

Explore APC Rack Power Distribution in 3D animation.APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization and circuit protection. User-defined alarm thresholds mitigate risk with real-time local and remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing and right sizing IT environments to lower total cost of ownership. Users can access and configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers..Environmentally Friendly: Yes.Environmental Certification: RoHS, REACH.Input Voltage: 120 V AC

The Tripp Lite N062-024-KJ-SH 1U rack-mount shielded blank keystone/multimedia patch panel in black, manages and organizes the cabling in your network. The 24 blank cutouts accommodate all keystone jacks, including RJ-45 Ethernet, HDMI audio/video, voice and USB applications. The clear numbered ports facilitate easy identification. This multimedia patch panel is made of fully shielded, heavy-duty steel. This accessory accounts for neat, tidy and organized cabling..1U rack-mount shielded blank keystone/multimedia patch panel manages and organizes the cabling in your network.Black steel.Connections: 24 x keystone jack cutout on both ends.Includes grounding wire.RoHS, TAA compliant.Comes with lifetime limited warranty

Tripp Lite Wall mount rack enclosure cabinet is featured with hinged cabinet for easy equipment access. Wall mount rack is featured with depth of 33" to accommodate most 1U servers and provides extra clearance for cable management..Capacity: 113.4 Kg.Dimensions: 25"(H) x 23.6"(W) x 33 1/2"(D).Black.Rack: 12U, 19" rack width.Adjustable mounting depths from 3" to 33" - accommodates most 1U servers and simplifies cable management.Ventilated front door and side panels for increased airflow.Hinged cabinet swings away from wall bracket for easy equipment and cable access.Heavy duty construction to handle added leverage, locking, reversible front door, locking, removable side panels, top and bottom panel cable access openings.Fully assembled for quick installation.Includes SRW12US33 wallmount rack enclosure, (36) M6 screws, (36) M6 cage nuts, (36) M6 washers, (2) keys, owner's manual.Certifications: EIA-310-D, IEC 60297-3-100, DIN 41494, IP250 protection rating, RoHS.Weight: 100 lbs..Warranty: 5 years limited.Tripp Lite Wall mount rack enclosure cabinet has heavy duty construction to support added leverage and is fully assembled for quick installation.

Tripp Lite PDU1220T Power Distribution Unit, 120 VAC Input/Output.Single phase NEMA L5-20P 4.57m 20A 120 VAC input.50/60 Hz frequency.Outlet connector: 13 x NEMA 5-15R, NEMA 5-20R.Cord length: 15'.Output voltage: 120 V, Overload protection: 20 A.Number of power cords: 1.PDU input voltage 100, 120, 127V, Voltage compatibility: 120 VAC, power rating: 20.Dimensions: 1.75"(H) x 17.5"(W) x 4.5"(D).Outlets center to center measurement: 30.2mm.Style: Rackmount, vertical rackmount, wallmount/under counter, Management: Browser, CLI, SNMP, serial or IP.1U horizontal rackmount format installs in one rack space, back panel grounding lug, high quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall mount and under counter installation formats.Supplies equipment with continuous power from any protected UPS, generator or mains input power source.Compatibility: Distribution of UPS, generator or commercially derived AC power to protected equipment.Package contents: PDU1220T rackmount power strip, instruction manual and warranty information.Certifications and standards: Tested to UL60950-1 (USA), CSA-C22.2 (Canada), cUL, ROHS.Weight: 5.2 lbs..Warranty: 5 years limited.Tripp Lite Power Distribution Unit - Consolidate Your Power Source

Tripp Lite 24 Port CAT6 patch panel is color coded for both EIA/TIA 568A and 568B installations which ensures easy identification. Patch panel has clear numbering on its front and back side to provide an easy way to locate cable runs..24 x RJ-45 network.Tripp Lite N252-024-HU, N252-024-V, SRW12US.Number of-ports: 24.Material: Metal.Form factor: 1U 19".Wiring scheme: T568B.Termination type: 110 type termination.Style: Cat6/6e/6a.Ports clearly numbered both on front and back.color-coded label on back offers both EIA/TIA 568A and 568B wiring.Labels on front enable each-port to be named.Ensure a wide range of plug-n-play options, EIA/TIA 2/32 spacing.110 punch down on rear of panel.Panel design will save you valuable space in on the rack.Includes Cat6 patch panel 568B 24-port, 1U.Compliant and standards: UL, RoHS, TAA.Warranty: Lifetime limited.Tripp Lite 24 Port CAT6 patch panel is designed for the management of cable connections and features RJ-45 female network interface.

The Traxx Solutions rack mount kit allows you to easily secure your Cisco Meraki desktop form factor security appliances to a standard 19" 1U network rack. The rack is constructed from durable 16-gauge steel with an industrial powder coated finish and is guaranteed to fit the models: MX64, MX64W (rear facing orientation only), MX67, MX67W (rear facing orientation only), MX67C (rear facing orientation only). An assortment of mounting holes support rear facing mounting for network connection visibility or forward mounting for a cleaner rack aesthetic, leaving only the status indicator light in view..This rack mount kit allows you to easily secure your Cisco Meraki desktop form factor security appliances to a standard 19" 1U network rack.Dimensions: 1.75"H x 19"W.Made of durable 16-gauge steel in a black powder-coated finish.Compatible with Cisco Meraki MX64, MX64W (rear-facing orientation only), MX67, MX67W (rear-facing orientation only), MX67C (rear-facing orientation only)

The ATS will maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails, the ATS will switch over to the secondary power source until primary input is restored and stable..Single phase IEC-320 C20 12' 20 A 200 - 240 V input.200 - 240 V 50/60 Hz output.Outlet connector: 8 IEC-C13, 2 IEC-C19.1U horizontal rack mount.Package includes: switch, metered PDU with ATS support, set of 2 C19 to C20 12'/ 3.7 m power cables, user manual with warranty information.2 digit display reports power consumption in amps.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable.2 - 7 ms transfer time.Switched outlets and ethernet interface supports individual outlet control on a real-time or programmable basis and user-specified alarm notification thresholds for all reported site power conditions.DHCP/Manual configuration support.Supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Outlets are factory programmed for sequential turn-on at 250 ms intervals when the PDU is first energized.LEDs confirm power availability on both input lines and for each output receptacle.Typical applications: Ideal for configurations requiring a simple PDU that displays power consumption in amps.Certifications: Tested to UL 60950 (USA, canada), CE (europe), class A (emissions), NOM (mexico), RoHS complaint.Weight: 10.3 lbs..Dimensions: 1.72"(H) x 17.3"(W) x 14.8"(D).2 years limited Mrf. warranty.Tripp Lite Sigle Phase Switched Power Distribution unit provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources.

Tripp Lite™ Power distribution unit is made of sheet metal for durability and has a input/output voltage rating of 120 V. Power distribution unit is rack mountable and supplies equipment with continuous power from any protected UPS..Single phase NEMA L5-30P 4.57m 30A 120 VAC input.50/60 Hz frequency.Outlet connector: 12 x NEMA 5-15/20R.Black.Cord length: 15'.Output voltage: 120 V, Overload protection: Two 20A breakers protect 6 outlets each.Material of construction: Sheet metal.Maximum input current: 30A, PDU input voltage 100, 120, 127V, Voltage compatibility: 120 VAC.Dimensions: 1.75"(H) x 17.5"(W) x 6.5"(D).Outlets center to center measurement: Distance between outlets = 30.20mm, Distance between Bank 1 and Bank 2 = 41.45mm, TVSS grounding: Rear grounding lug.Style: Rackmount, vertical rackmount, wallmount/under counter, Form factors supported: 1U rackmount, 0U vertical rackmount, wall-mount, and under-counter installation.Outlets are arranged in two loading banks, each with separate 20A breaker protection, highly reliable design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Ideal means of powering networking equipment in datacenters, computer rooms and network closets, supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDUMH30 metered rackmount PDU, owner's manual with warranty information.Certifications and standards: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.Weight: 7 lbs..Warranty: 2 years limited.Tripp Lite Power Distribution Unit - Ideal for Powering Servers

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by APC Centralized Management platforms using StruxureWare Data Center Expert, Operations, Capacity, and Energy Efficiency. New AP8000 series Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, and locking IEC receptacles..Environmentally Friendly: Yes.Environmental Certification: RoHS, REACH.Input Voltage: 120 V AC

Tripp Lite Single phase basic power distribution unit can be 1U/0U vertical rack mounted. Unit has adjustable mounting brackets to offer easy installation..Single phase IEC-320 C20 16 A 100 - 240 V input.Input voltage: 100 - 240 V, frequency required: 50/60 Hz output.Outlet connector: 12 IEC C13, 2 IEC-C19.Overload protection: 16 A.1U/0U vertical rack mount.Package includes: PDU12IEC rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel grounding lug.Reversible housing; 4 1/4" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Weight: 3.2 lbs..Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.

The Tripp Lite B021-000-19-HD 1U rack-mount console features 19" 1366 X 768 resolution LCD, provides smart solution for controlling computer, server or KVM switch in IT environments in a premium space. With USB 2.0 pass-through port, it offers connection for flash drive, CAC card reader etc. This 1.7" x 18.8" x 27.3" rack-mount console works with the Federal Trade Agreements Act for GSA Schedule purchases. With DVI-I female to USB A female connector, it is compatible with PC, Linux, Mac and Sun system..Rack-mount console with LCD monitor offers control entry network in a compact box.Dimensions: 1.7"H x 18.8"W x 27.3"D, 1U H rack.Comes in black color and features steel construction for durability.Voltage: 110/220 V, Current: 2 A, Wattage: 30 W line mode, 5 W standby mode.Monitor: 19" LCD with 1366 x 768 resolution.Compatible with PC, Linux, Mac and Sun.Cooling capacity: 102 BTU/hr line mode, 102 BTU/hr standby mode.Connectors: DVI-I female to USB A female.TouchPad pointing device.Interfaces/ports: USB, DVI.Great for controlling a computer, server or KVM switch in IT environments where rack space is at a premium.Mountable in 19" 1U system racks with depths ranging from 27" - 42".Features a USB 2.0 pass-through port for easy connection of a USB peripheral, including a flash drive or CAC card reader.Contains KVM cable kit (DVI-I, USB), DVI to VGA adapter, AC power cord, owner's manual and mounting brackets.Meets UL 60950-1 (USA), CAN/CSA (Canada), FCC Part 15 Class A, CE, IEC 60950-1, RoHs standards and certifications.Weight: 27.78 lbs.

The B021-000-19-HD2 1U Rack-Mount Console combines a full keyboard, numeric keypad, touchpad and 19-inch color LCD for easy all-in-one control of a computer, server or KVM switch. Easy to install and simple to operate, it slides neatly into 1U of rack space when not in use. The rear DVI-I console port supports both digital and analog video signals for connecting to a DVI- or VGA-enabled server or KVM switch (a DVI to VGA adapter is included). The LCD screen supports video resolutions up to 1920 x 1080 (1080p). Video settings of the connected computer are automatically adjusted for optimal display on the LCD screen. USB 2.0 pass-through ports on the front and rear allow you to connect a USB peripheral, such as a flash drive or CAC card reader, to your computer with a USB cable (sold separately). The B021-000-19-HD2 mounts into 1U of space in an EIA-standard 19-inch rack using the included mounting brackets and user-supplied screws. Simply pull out the steel drawer and flip up the screen when needed, then slide it back into the rack in automatic sleep mode when you're finished. This keeps the keyboard and screen from blocking access to rack equipment when the console is not in use. This console is compatible with all major operating systems and KVM switches with a VGA or DVI monitor port and USB keyboard/mouse ports. This enables the B021-000-19-HD2 to be integrated into an existing system to provide secure management of critical network systems without a major investment in new hardware. Features Space-Saving Console for IT Environments Where Rack Space Is Limited 19 in. LCD monitor, keyboard, numeric keypad and touchpad All-in-one control of computer, server or KVM switch Supports video resolutions up to 1920 x 1080 (1080p) Detachable 6 ft. AC power cord with NEMA 5-15P and C13 connectors Accepts Digital and Analog Video Signals DVI-I port allows connection to DVI digital or VGA analog server or KVM switch DVI to VGA adapter included DDC2B emulation automatically adjusts video settings for optimal display on monitor USB 2.0 Pass-Through Ports Front and rear ports allow easy connection of USB peripheral, such as flash drive or CAC card reader USB cable sold separately Convenient Space-Saving Design Mounts in 1U of space in EIA-standard 19 in. 2- and 4-post racks Slides neatly out of sight when not in use Goes into automatic sleep mode when cover is closed Rack-mounting brackets included Supports Multiple Platforms for Maximum Flexibility Compatible with all major operating systems, including Windows , Mac OS , Linux , UNIX and Solaris Compatible with KVM switches with VGA or DVI port and USB keyboard/mouse ports TAA-Compliant Complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.DVI-I port supports both digital and analog video signals.19 in. LCD screen supports video resolutions up to 1920 x 1080.USB pass-through port for connecting USB peripherals.Goes into automatic sleep mode when cover is closed.Compatible with all major operating systems.Black

The Vertiv Liebert PSI5 1440VA UPS is designed to protect and extend the life of your electronic devices in school, home and office. This 1U rack mount UPS offers cost-effective protection from downtime and damage caused by power outages, brownouts, sags, surges or noise interference. Automatic Voltage Regulation (AVR) extends battery life and safeguards critical equipment. Voltage regulation is from 83 to 159 VAC without using the battery. With advanced pure sine wave output, this line interactive UPS ensures availability of critical IT applications like network closets and small data centers. This battery backup allows orderly shutdown of critical equipment. It takes less than 6 milliseconds transfer time to battery. Add an optional Vertiv Liebert Unity communication card and remotely monitor up to 50 UPS systems through the free Vertiv Trellis Power Insight Application. It has a 2-year Vertiv UPS warranty with optional extensions for up to 5 years total coverage..POWER PROTECTION: The 1440VA UPS has AVR to correct power disturbances..SPACE-SAVING 1U RACK: Get similar features as a 2U battery backup in a compact 1U rack space..MORE USABLE POWER: This single phase line interactive UPS has 0.9 output power factor..REMOTE MANAGEMENT CAPABILITY: Add a communication card to this UPS to monitor devices remotely..PROGRAMMABLE OUTLETS: Get 5 total outlets with 2 programmable outlets to prioritize critical loads.

APC® Basic power distribution unit offers NEMA L6-30P input connections and has input current rating of 30 A. Unit featuring rack mounting brackets can be 1U horizontal rack mounted and offers overload protection up to 24 A..NEMA L6-30P 12' 30 A 200 - 230 V input.208 V 50/60 Hz output.Outlet connector: 10 IEC 320 C13.Overload protection: 24 A.1U horizontal rack mount.Includes: Installation guide, rack mounting brackets, user manual.Enables a quick recovery from overload events.5 - 95% operating relative humidity.5 - 95% s-rage relative humidity.Operating/storage elevation: 0 - 15000'/0 - 50000'.Certifications: cUL listed, CSA, PSE, UL 60950, UL listed, RoHS complaint.Weight: 5.6 lbs..Dimensions: 1.73"(H) x 17.52"(W) x 3.03"(D).2 years limited Mrf. warranty.APC® AP9571A Basic Power Distribution Unit provides reliable power distribution via a single input with multiple output receptacles and distributes power from low amperage single phase circuits to higher-power 3-phase solutions.

Improve the efficiency of cooling system by covering unused rack space..Improve the efficiency of cooling system by covering unused rack space.Rack height: 1U.Material: Steel.Dimensions: 1.7"(H) x 19.1"(W) external, 0.8"(D) internal, 19"(W) Panel.Black.Sturdy steel construction.Applications: Use with server racks and cabinets, structured wiring closets and network distribution cabling to keep cables neat and tidy.Separate and organize cables through a dense nylon brush strip.Mounting options: Front mount.Reduce dust accumulation near valuable server equipment with nylon bristles that surround cables.Includes: 1U brush strip horizontal server rack cable management panel, 4 x 10/32 panel screws, 4 x 12/24 panel screws.Certifications and standards: EIA RS310-D, CE, RoHS, Green compliant.Weight: 14.1 oz..Warranty: 2 years limited

CyberPower CPS1215RMS Rack Mountable 1.8 kVA Power Distribution Unit.Input voltage: 120 - 330 VAC clamping.Output voltage: 120 VAC (60 Hz).Power capacity: 1.8 kVA.Plug/connector type: NEMA 5 15P straight, Receptacles: 12 x NEMA 5 15R.Form factor: 1U 19" rack mountable.Cord length: 15'.LED indicator: Power on (Yellow), ground (Green), surge (Red).Surge energy rating: 1800 J.LED status lights indicate Power On and wiring faults.Provides shielding against electromagnetic interference & radio frequency signals. Most co mmonly, this is used to prevent line noise or hu mming that occurs over telephone lines or stereo electronics.Convenient unit reset in case of an overload.EMI / RFI 150KHz to 150MHz filtering, 15 A circuit breaker, lighted on/off switch.Operating temperature: 32 - 104 deg F, 5 - 149 deg F (Non operating), Operating humidity: 0 - 95% non condensing, 0 - 95% non condensing (Non operating), Altitude: 0 - 10000 ft operating, 0 - 50000 ft non operating.Compatibility: PC.Certifications and standards: UL, RoHS.Includes: CPS 1215RMS unit, warranty card/manual.Weight: 5.10 lbs..Warranty: 3 years limited

Maintain organized and efficient network operating conditions, using the Eaton 5P1000R UPS. With its output power capacity of 770 W, this line-interactive UPS ensures optimum performance in case of sudden spikes in the power supply. Its powerful battery requires less recharge time and offers a run time of 5 mins at Full Load. Equipped with an intuitive display screen, it allows improved control and easy navigation for added convenience..770 W UPS protects your equipment in case of power outages or power fluctuations.Sealed lead acid battery offers a run time of 5 mins at full load on a recharge time of Functional.Dimensions: 1.7"H x 17.2"W x 20"D.Output voltage of 120 VAC to ensure adequate power supply.Load protected, on battery and fault aid in seamless navigation.1U Rack or wall mountable construction makes it convenient to install and use.Equipped with 5 outlets, a RS-232 (RJ45) ports and USB port as standard (HID) and NEMA 5-15P plug for seamless connectivity.6' cord lets you set up your system at a distance.CISPR 22 Class B, cULus, EN55024, FCC Part 15 B, IEC 62040-2 C1-C2, RoHS, UL 1778, UL 497A compliant.3-year limited warranty.The Eaton 5P1000R 120 VAC UPS helps regulate the supply of power to your servers and related equipment to ensure efficient operation.

APC® Basic power distribution unit featuring NEMA 5-20R outlet connector can be 1U horizontal rack mounted and includes rack mounting brackets. Unit offers NEMA L5-20P input connections and has input current rating of 20 A..NEMA L5-20P 12' 20 A 100 - 120 V input.120 V 50/60 Hz output.Outlet connector: 10 NEMA 5-20R.1U horizontal rack mount.Includes: Installation guide, rack mounting brackets.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: cUL recognized, CSA, UL 1363, UL recognized, RoHS complaint.Weight: 5.50 lbs..Dimensions: 1.75"(H) x 17.60"(W) x 2.25"(D).2 years limited Mrf. warranty.APC® AP9564 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

The CyberPower OR700LCDRM1U Smart App LCD UPS provides battery backup (using simulated sine wave output) and surge protection for department servers, workgroup servers, workstations, network devices, and telecom installations..Battery Backup - Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown..Surge Protection - Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage..Data Line Protection - Prevents power surges that travel through telephone and Ethernet lines from causing damage to electronics..Line Interactive Topology - Exists when a line interactive UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., spikes) without having to switch to battery..Automatic Voltage Regulation (AVR) - Provides clean, consistent AC power by automatically increasing (boosting) low voltage without using battery power when incoming utility power experiences minor fluctuations..Simulated Sine Wave Output - Uses pulse wave modulation to generate a stepped, approximated sine wave to supply cost-effective battery backup power for equipment that does not require sine wave output..GreenPower UPS™ Bypass Design - Is a patented design that allows utility power to bypass the UPS transformer, when AC power is stable, which reduces energy consumption, noise, and heat buildup..Multifunction LCD Panel - Displays immediate, detailed information on the UPS battery and power conditions, alerting users to potential problems before they can affect critical equipment and cause downtime..ENERGY STAR - This model is an ENERGY STAR® Qualified Uninterruptible Power Supply (UPS) system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment..The CyberPower OR700LCDRM1U Smart App LCD UPS provides power protection for department and workgroup servers, workstations, network devices, and telecom equipment.

The Traxx Solutions rack mount kit allows you to easily secure your Cisco Meraki desktop form factor security appliances to a standard 19" 1U network rack. The rack is constructed from durable 16-gauge steel with an industrial powder coated finish and is guaranteed to fit the models: MX68, MX68W (rear facing orientation only), MX68CW (rear facing orientation only). An assortment of mounting holes support rear facing mounting for network connection visibility or forward mounting for a cleaner rack aesthetic, leaving only the status indicator light in view..This rack mount kit allows you to easily secure your Cisco Meraki desktop form factor security appliances to a standard 19" 1U network rack.Dimensions: 1.75"H x 19"W.Made of durable 16-gauge steel in a black powder-coated finish.Compatible with Cisco Meraki MX68, MX68W (rear-facing orientation only), MX68CW (rear-facing orientation only)

The CyberPower PDU41001, an 8-outlet (front), 1U rackmount switched power distribution unit (PDU), provides 120V 15A output. It distributes power to eight NEMA 5-15R receptacles from a single NEMA 5-15P plug with unfiltered electrical pass-through. The switched outlet receptacles can be managed individually or collectively over the network, using the CyberPower Management Console, a web browser, and the RJ45 Ethernet port for network connection, or locally by using the LCD controls..Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Nominal input voltage 100-120VAC.Provides 100-120V 15A output.Dimensions: 1.75"H x 17.05"W x 4.41"D.Single NEMA 5-15P plug with unfiltered electrical pass-through.Distributes power to eight NEMA 5-15R receptacles.Provides local and remote control for individual and multiple outlets.Allows for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Included: four mounting brackets (two short and two long), 10 flat head M4x8 bracket mounting screws, cord retention tray, 10 cable ties, 6 M3x6 cord retention tray mounting screws, six M5x12 screws, six washers, RJ45/DB9 serial port connection cable, user manual, registration card, CD.3-year manufacturer limited warranty

APC® Basic power distribution unit featuring rack mounting brackets can be 1U horizontal rack mounted and offers overload protection up to 24 A. Unit has input voltage rating of 200 - 230 V and input current rating of 16 A..IEC-320 C20 8.2' 16 A 200 - 230 V input.120 - 230 V 50/60 Hz output.Outlet connector: 10 IEC 320 C13, 2 IEC 320 C19.1U horizontal rack mount.Includes: Rack mounting brackets, user manual.Puts power where it is needed most-in the racks near the equipment.0 - 95% operating relative humidity.0 - 95% storage relative humidity.Operating/storage elevation: 0 - 10000'/0 - 50000'.Certifications: CE, GOST, VDE, Victoria, RoHS complaint.Weight: 9 lbs..Dimensions: 1 3/4"(H) x 17.60"(W) x 2 1/4"(D).2 years limited Mrf. warranty.APC® AP9559 Basic Power Distribution Unit (PDUs) allows user to distribute power outlets to rack-mount equipment.

The Cisco NXK-ACC-KIT-1RU is a rack mount bracket kit specifically designed for Cisco Nexus switches, including the 92160YC-X, 92300YC, and 92304QC models. This highly functional accessory conveniently installs your switch in a standard 1RU (rack unit) configuration. With its sturdy construction and easy-to-use design, this kit ensures secure mounting of your Nexus switch within any compatible rack system. Properly positioning your network equipment using this bracket kit can optimize space utilization while ensuring efficient cooling and cable management. The suitability of this product for specific Cisco switches guarantees compatibility without compromising performance or stability. You will be able to make full use of all available features on these powerful networking devices by deploying them alongside the recommended accessories like the NXK-ACC-KIT-1RU..Rack mount kit is designed for the select Cisco switches.Designed For:Nexus 92160YC-X, 92300YC, 92304QC, 9236C, 9272Q, 93108TC-EX, 93108TC-FX, 93120TX, 93128TX, 93180LC-EX, 93180LC-FX, 93180YC-EX, 93180YC-FX, 93240YC-FX2, 9332C, 9332PQ, 9336C-FX2, 9336PQ, 9348GC-FXP, 9364C, 9372PX, 9372PX-E, 9372TX, 9372TX-E, 9396PX, 9396TX.Kit contains two front brackets, two rear brackets, two slider rails, six M4 Phillips pan-head screws.Built on Cisco silicon, the Cisco Nexus 9000 series switch delivers industry-leading data center performance from the inside out. Reduce operational costs with unified ports supporting 10/25G Ethernet and 8/16/32G Fibre Channel, RDMA over converged Ethernet (RoCE), and IP storage.

EPE’s server 1U/2U universal shipping box packaging solution is sustainable, 100% recyclable, and Reusable packaging. Our server shipping box uses increased carton weight (strength) for durability and reuse as needed. FedEx/UPS/USPS/ISTA Certified. Passes all transit testing requirements. Fits 1U and 2U server dimensions within minimum 26.75” x 16.75” x 1.7” and maximum 30.5” x 15.5” x 3.5”..Compute Server 1U/2U Shipping Box.Fits 1U and 2U server dimensions within minimum 26.75” x 16.75” x 1.7” and maximum 30.5” x 15.5” x 3.5”.Outside Dimensions: 37" x 23" x 8"

The Tripp Lite NetDirector B030-008-17-IP 8-Port 1U rack mount KVM console comes with 17" LCD and IP remote access. Control a network of 8 servers and computers from one keyboard, mouse and monitor. It allows up to 64 authorized users and 32 concurrent remote log-in and supports video resolutions of up to 1920 x 1080. The rack mount works with all major operating systems and browsers..Rack mount KVM console.Dimensions: 1.7"H x 18.9"W x 26.8"D.Comes in black color with steel construction.Interfaces: 1 x RJ-45, 10 x USB, 9 x HDMI.Screen size: 17" LCD full HD with resolution of 1920 x 1080.System requirements: Internet explorer, Firefox, Mozilla, safari, chrome, opera or Netscape browser with 128-bit encryption, directX 7.0 or higher.Authentication method: LDAP, RADIUS.Port control: Push buttons, hot keys, OSD.Autoscan duration: 1 - 255 sec.Frequency required: 50/60 Hz

Tripp Lite NetController KVM switch controls up to 248 computers by daisychaining up to 15 additional B042-Series KVM switches. Switch with P780 series USB/PS2 combo KVM cable kits allows you to connect either USB or PS/2 computers..Color: Black.Connects devices (from/to): Connect either USB or PS/2 computers.Number of ports: 8.PC/Server VGA, USB or PS/2.IP remote access yes with B051-000.BTUs 245.52.Port control push buttons, hotkeys, OSD.AC adapter 100 - 250 V.Switch between connected computers via the on-screen display (OSD), push buttons, or keyboard hotkey commands.Supports video resolution up to 2048 x 1536.Includes: B042-008 netcontroller 8-port, 1U rackmount KVM switch, external power supply, rackmount hardware, 8" daisychain cable ( for longer daisy-chain cables, see Tripp Lite P781 series cables).Compatible with all major operating systems.Constructed of heavy-duty steel housing.Firmware upgradeable.Password protection and auto-log out features.1 year limited warranty.Tripp Lite NetController USB/PS2 KVM switch with on screen display and 8 ports and controls 8 computers via a single VGA monitor and USB keyboard/mouse.

Keep your systems safe by adding the Eaton 5P750R UPS to your existing network setup. This line-interactive UPS works as a backup power option with its output power capacity of 600 W, and protects your equipment from unexpected power outages or brownouts. Its powerful battery provides a run time of 12 mins at half load and 4 mins at full load and requires less recharge time. Equipped with an intuitive display screen, it allows improved control and easy navigation for added convenience..600 W UPS protects your equipment in case of power outages or power fluctuations.Sealed lead acid battery offers a run time of 12 mins at half load and 4 mins at full load on a recharge time of Functional.Dimensions: 1.7"H x 17.2"W x 20"D.Output voltage of 120 VAC to ensure adequate power supply.Load protected, on battery and fault aid in seamless navigation.1U Rack or wall mountable construction makes it convenient to install and use.Equipped with 5 outlets, a RS-232 (RJ45) ports and USB port as standard (HID) for seamless connectivity.6' cord lets you set up your system at a distance.CE, CISPR22 class B, cULus, EN 55024, Energy star, FCC part 15 class B, IEC 62040-2 C1-C2, RoHS, UL 1778, UL497A compliant.3-year limited warranty.The Eaton 5P750R 120 VAC UPS is an ideal power supply system to guard servers, telecom equipment and other networking hardware.

The Tripp Lite SmartPro 1000 VA 800 W line-interactive rackmount UPS is a vital backup power source during mains power failure. It incorporates automatic voltage regulation technology to get rid of the minor power fluctuations without switching to battery power. This UPS has USB, EPO, DB9 serial and optional SNMPWEBCARD to support simultaneous communications. It offers 4 min of battery run for full load and 14 min for half load. It comes with a 10' cable for extended connectivity. It comes along with 4-post compatible mounting accessories for firmly positioning the UPS..Battery run time: 4 mins full load, 14 mins half load, Recharge time: Less than 4.5 hrs..Battery type: Rechargeable battery.Cable length: 10'.Output capacity: 1000 VA.Output watt capacity: 800 W.Receptacles: Six NEMA 5-15R outlets.Output voltage: 120 VAC.Input voltage: 120 VAC, Input current: 9 A.Joule rating: 450 J.Form factor: 1U rack mountable.Interface: DB9 serial, USB.Dimensions: 1 3/4"H x 17 1/2"W x 16 3/4"D.Features steel construction for durability and fan cooling for reliable operation.Operating temperature: 32 - 104 deg F, Storage temperature: 5 - 122 deg F, Humidity: 0 - 95 percent non-condensing.Contains mounting hardware, cabling for USB & DB9 monitoring and EPO switching, PowerAlert unattended shutdown and UPS/power monitoring software.Meets FCC Part 15 Category A (EMI), UL1778, NOM, CSA, TAA and ENERGY STAR certifications and standards.Weight: 32 lbs..Comes with 2 years warranty

Tripp Lite SmartRack SR25UBEXP, SR25UBKD, SR42BMDEXPNDNR3 Mid-Depth 4-Post premium open frame rack..24 x RJ-45 female.1 3/4"(H) x 19"(W).Tripp Lite SmartRack SR25UBEXP, SR25UBKD, SR42BMDEXPNDNR3 Mid-Depth 4-Post premium open frame rack.Number of-ports: 24.Color: Black, Material: Steel.Form factor: 1U rack-mountable

The Tripp Lite N062-016-KJ 16-Port 1U rack mount unshielded blank keystone/multimedia patch panel in black, manages and organizes cabling in the network. It has a heavy-duty cold-rolled steel construction that provides long life durability. The 16 blank cut-outs accommodate keystone jacks, RJ-45 Ethernet, voice, HDMI audio/video and USB application..Comes in black color with heavy-duty cold-rolled steel construction.Number of ports: 16 x keystone jack cutout.16 blank cut-outs accommodate all keystone jacks, including RJ-45 Ethernet, HDMI audio/video, voice and USB applications.Ports are numbered for easy connection identification.Mounts into 1U of standard 19" 2-post or wall mount rack.Includes grounding wire.RoHS compliant.Comes with lifetime limited warranty

The Tripp Lite N062-012-KJ 12-Port 1U rack mount unshielded blank keystone/multimedia patch panel in black, manages and organizes cabling in the network. It has a heavy-duty cold-rolled steel construction that provides long life durability. The 12 blank cut-outs accommodate keystone jacks, RJ-45 Ethernet, voice, HDMI audio/video and USB application..Comes in black color with heavy-duty cold-rolled steel construction.Number of ports: 12 x keystone jack cutout.12 blank cut-outs accommodate all keystone jacks, including RJ-45 Ethernet, HDMI audio/video, voice and USB applications.Ports are numbered for easy connection identification.Mounts into 1U of standard 19" 2-post or wall mount rack.Includes grounding wire.RoHS compliant.Comes with lifetime limited warranty

Helps eliminate cable stress..Black.Dimensions: 1.77"(H) x 3.9"(W) x 19.13"(D).Helps eliminate cable stress.Organizes cables within SmartRack enclosure or open rack.Required mounting hardware included.Cold rolled steel with black finish.Compatibility: Tripp lite smartrack enclosure.Rack height: 1U.19" panel width.RoHS Compliant.Lifetime limited warranty

This 1U rackmount uninterruptible power supply (UPS) provides battery backup power and surge protection for connected equipment including servers, network devices, workstations, and telecom installations. Additional features include automatic voltage regulation (AVR) to correct minor fluctuations in utility power without switching to battery mode and a multifunction LCD to keep you informed about power conditions. The UPS also offers remote management capabilities with an optional network management card. The Smart App LCD OR500LCDRM1U comes with a three-year warranty (including coverage of batteries) and a $300,000 lifetime connected equipment guarantee..Surge energy rating: 1030 Joules.Equipped with 6 surge-protected outlets for seamless connectivity (4 battery-connected).Product Dimensions are 17.05"W x 1.75"H x 9.25"D with a Cord Length of 10 ft (3.0 m)..Multifunction LCD Panel - Displays immediate, detailed information on the UPS battery and power conditions, alerting users to potential problems before they can affect critical equipment and cause downtime..This UPS has a Runtime of 3 min at Full Load and a Runtime of 12 min at Half Load. The Nominal Input Voltage is 120 VAC using an input plug type NEMA 5-15P..Meets or exceeds UL1778, cUL 107.1, FCC DOC Class B, RoHS, ENERGY STAR standards.UPS protects electronic equipment and prevents data loss during a power outage.Featuring serial interface for communication and management, this UPS provides surge protection and filtering for RJ11/RJ45 (in/out combo) ports and coax lines (in/out).Automatic Voltage Regulation (AVR) - Provides clean, consistent AC power by automatically increasing (boosting) low voltage without using battery power when incoming utility power experiences minor fluctuations..Warranty: 3 Year Limited Warranty.Keep valuable electronics safe and prevent data loss during utility power problems with the Smart App LCD OR500LCDRM1U from CyberPower, your trusted ally in power.

Fills unused rack spaces to optimize airflow and prevent recirculation..Dimensions: 19"(H) x 1 3/4"(W) x 1 1/4"(D).Improves cooling efficiency.Fills unused rack spaces to optimize airflow and prevent recirculation.Tool-less mounting.19" 1U blanking panel kit, 50 pieces of 1U blanking panels included to fill one to 50U of rack space.Fits any square hole

The Tripp Lite SmartPro 750 VA 600 W 1U line-interactive rackmount UPS is a vital backup power source during mains power failure. This UPS has USB and DB9 serial interface to support simultaneous communications and also supports optional SNMP/Web accessory card. It incorporates automatic voltage regulation technology to get rid of the minor power fluctuations without switching to battery power. It enables remote outlet management through integrated two bank switched PDU to achieve load shedding or remote reboot of individual devices. It comes along with mounting brackets that support 2 and 4-post installation..Battery run time: 4.9 mins full load, 13.2 mins half load, Recharge time: Less than 4 hrs..Battery type: Rechargeable battery.Cable length: 10'.Output capacity: 750 VA.Output watt capacity: 600 W.Receptacles: Six NEMA 5-15R outlets.Output voltage: 120 VAC.Input voltage: 120 VAC, Input current: 7 A.Joule rating: 450 J.Form factor: 1U rack mountable.Interface: DB9 serial, USB, RS-232.Dimensions: 1 3/4"H x 17 1/2"W x 16 3/4"D.Features steel construction for durability and fan cooling for reliable operation.Operating temperature: 32 - 104 deg F, Storage temperature: 5 - 122 deg F, Humidity: 0 - 95 percent non-condensing.Contains cabling for USB & DB9 monitoring and EPO switching, PowerAlert unattended shutdown and UPS/power monitoring software and instruction manual.Meets FCC Part 15 Category A (EMI), CSA, NOM and UL1778 certifications and standards.Weight: 30 lbs..Comes with 2 years warranty

The Tripp Lite SMARTPRO ® Series 1000 VA 800 W 1U line-interactive rackmount UPS is a vital backup power source during mains power failure. This UPS has USB and DB9 serial interface to support simultaneous communications. It incorporates automatic voltage regulation technology to get rid of the minor power fluctuations without switching to battery power. It enables remote outlet management through integrated two bank switched PDU to achieve load shedding or remote reboot of individual devices. This UPS offers surge protection to critical network applications. It comes along with mounting brackets that support 2 and 4-post installation..Battery run time: 4 mins full load, 14 mins half load, Recharge time: Less than 4 hrs..Battery type: Rechargeable battery.Cable length: 10'.Output capacity: 1000 VA.Output watt capacity: 800 W.Receptacles: Six NEMA 5-15R outlets.Output voltage: 120 VAC.Input voltage: 120 VAC, Input current: 9.2 A.Joule rating: 450 J.Form factor: 1U rack mountable.Interface: DB9 serial, USB, RS-232.Dimensions: 1 3/4"H x 17 1/2"W x 16 3/4"D.Features steel construction for durability and fan cooling for reliable operation.Operating temperature: 32 - 104 deg F, Storage temperature: 5 - 122 deg F, Humidity: 0 - 95 percent non-condensing.Contains cabling for USB & DB9 monitoring and EPO switching, PowerAlert unattended shutdown and UPS/power monitoring software and instruction manual.Meets FCC Part 15 Category A (EMI), CSA, NOM and UL1778 certifications and standards.Weight: 32 lbs..Comes with 2 years warranty

Are you looking for a scalable, low-cost performance server solution for your virtualized and software-defined compute workloads? The HPE ProLiant DL325 Gen11 server is a low-cost 1U 1P solution that delivers exceptional value balancing compute, memory, and network bandwidth at 1P economics..It is a 1U rack server designed for high-performance computing and virtualization workloads..Powered by an AMD EPYC 9354P processor with 32 cores and 256 MB of L3 cache, it comes with 64 GB of DDR5 SDRAM running at 4800 MHz.The server includes 64GB of DDR5 SDRAM at 4800 MHz, supports up to 3 TB across 12 DIMM slots, and features an HPE MR408i-o Gen11 RAID controller with support for RAID 0, 1, 5, 6, 10, 50, and 60..Offers enhanced connectivity and performance with 2 PCIe Gen5 x16 slots and 2 OCP 3.0 slots..The server features robust connectivity with two 10/25 Gigabit Ethernet SFP28 ports via the Broadcom BCM57414 controller, supporting Cat-5e and Cat-6a cables, and an OCP Mezzanine 3.0 slot for network expansion..Equipped with two 800W Flex Slot Platinum power supplies, the server features HPE Power Regulator, Power Capping, Collaborative Power Control, and HPE iLO 6 for advanced power management..Dimensions: 1.7" H x 17.1" W x 25.6" D.Certifications & Standards: ENERGY STAR 4.0, ErP Lot 9, WEEE.3-year warranty included

The Tripp Lite SmartPro 750 VA 600 W 1U line-interactive rackmount UPS is a vital backup power source during mains power failure. This UPS has USB and DB9 serial interface to support simultaneous communications. It incorporates automatic voltage regulation technology to get rid of the minor power fluctuations without switching to battery power. It enables remote outlet management through integrated two bank switched PDU to achieve load shedding or remote reboot of individual devices. This UPS offers surge protection to critical network applications. It comes along with mounting brackets that support 2 and 4-post installation..Battery run time: 4.9 mins full load, 13.2 mins half load, Recharge time: Less than 4 hrs..Battery type: Rechargeable battery.Cable length: 10'.Output capacity: 750 VA.Output watt capacity: 600 W.Receptacles: Six NEMA 5-15R outlets.Output voltage: 120 VAC.Input voltage: 120 VAC, Input current: 7 A.Joule rating: 450 J.Form factor: 1U rack mountable.Interface: DB9 serial, USB, RS-232.Dimensions: 1 3/4"H x 17 1/2"W x 16 3/4"D.Features steel construction for durability and fan cooling for reliable operation.Operating temperature: 32 - 104 deg F, Storage temperature: 5 - 122 deg F, Humidity: 0 - 95 percent non-condensing.Contains cabling for USB & DB9 monitoring and EPO switching, PowerAlert unattended shutdown and UPS/power monitoring software and instruction manual.Meets FCC Part 15 Category A (EMI), CSA, NOM and UL1778 certifications and standards.Weight: 30 lbs..Comes with 2 years warranty

Eaton eATS ePDUs: Designed for switching non phase synchronized AC power sources, the automatic transfer switch ePDUs intelligent circuitry monitors both inputs, providing a fast switch transfer from primary to secondary source power critical equipment without interruption. These ePDUs assure the highest level of redundancy to mission critical applications..Power distribution unit.Dimensions: 1.7"H x 17.25"W x 9.84"D.Input voltage: 120 V, Frequency: 50 - 60 Hz.Input current: 12 A.Power capacity: 1.44 kW.Phase: Single phase.Cord length: 10'.Input receptacles: 2 x NEMA 5-15P.Output receptacles: 10 x NEMA 5-15R.Serial interface: RS232.Mounting style: Horizontal.Rack height: 1U.Ethernet interface: 10/100 Ethernet.Certifications and standards: UL Listed, FCC.3 years standard warranty

Eaton 5P Rackmount 1500 VA UPS has Intelligent Power® software suite that allows you to monitor and manage power devices. UPS has line interactive design to protect from power failures, surges, sags, under-voltage and over-voltage conditions..Input voltage: 110 VAC.Output voltage: 132 /120 /125 VAC.Power capacity: 1100 W/1440 VA.Plug/connector type: NEMA 5-15P, Receptacles: 5 x NEMA 5-15R.Interfaces/ports: Network (RJ-45), USB, 1 x expansion slots.Battery characteristics: Maintenance-free, sealed, Battery chemistry: Lead acid, Backup/run time: 4 min (full load), 14 min (half load).Rack height: 1U, Form factor: Rack mountable.Dimensions: 1.7"(H) x 17.2"(W) x 21.8"(D), Color: Black/silver.Input cord: 6'.Software included: Intelligent power software suite.Features hot swappable internal batteries, LCD display, advance battery management.Includes 5P rackmount UPS, user manual CD, intelligent power software suite CD, quick start guide, USB cable, RS-232 serial cable, 4 post rail kit.Certifications and standards: UL 1778, UL497A, cULus, CE, IEC 62040-2 C1-C2, EN 55024, CISPR22 class B, FCC part 15 class B, Green Compliance, RoHS, Energy Star.Weight: 44.1 lbs..Warranty: 3 years limited.Eaton 5P Rackmount 1500 VA UPS in black/silver color measuring 1.7" x 17.2" x 21.8" offers advanced battery management that extends battery service life by up to 50 percent using an innovative three stage charging scheme.

HPE ProLiant DL325 Gen11 Are you looking for a scalable, low-cost performance server solution for your virtualized and software-defined compute workloads? The HPE ProLiant DL325 Gen11 server is a low-cost 1U 1P solution that delivers exceptional value balancing compute, memory, and network bandwidth at 1P economics. Powered by 4th Generation AMD EPYC™ Processors with up to 128 cores, increased memory bandwidth (up to 3 TB), high-speed PCIe Gen5 I/O and EDSFF storage, and supporting up to 2 double-width GPUs at the front, this server is a superb low-cost, 1U 1P, performance solution for your virtualized workloads. The silicon root of trust anchors the server firmware, creating a fingerprint for the AMD Secure Processor that must be matched exactly before the server boot. The HPE ProLiant DL325 Gen11 server is an excellent choice for virtualized workloads such as software-defined compute, CDN, VDI, and secure edge apps that require balancing processor, memory, and network bandwidth..This Rack mount server is versatile and designed to handle a range of tasks for small and medium-sized businesses, offering robust performance in a compact form factor..Processor: AMD Epyc 9124 4th Gen 16 cores 32 MB L3 Cache 3.7 GHz RAM: Capacity: Up to 128 GB Technology: HPE DDR5 UDIMM.64GB of Memory. The server supports various RAID levels through the Embedded Intel VROC (Virtual RAID on CPU) controller: RAID 0 RAID 1 RAID 5 RAID 10.Includes the following expansion slots: 2 x PCIe 5.0 x16 (low-profile) 2 x PCIe 5.0 OCP 3.0 slots.Minimum Requirements: Operating System: Microsoft Windows Server 2019 Standard or HPE Integrated Lights-Out (iLO) 5 Processor: AMD Epyc 9124 4th Gen or equivalent Memory: 4 GB DDR5 UDIMM Storage: 500 GB HDD or 128 GB SSD Power Supply: 180W External Power Supply.Power Source: 180W Slim Type External Power Supply Power Management: Idle Power Management: Advanced power management features reduce power consumption during idle periods..Dimensions: 1.69" H x 17.11" W x 25.57" D.Meets several certifications and standards to ensure reliability, security, and compliance: Energy Star Certified: Meets energy efficiency standards set by the U.S. Environmental Protection Agency. Energy-related Products Directive Lot 9 (ErP Lot 9). Waste Electrical and Electronic Equipment Directive (WEEE)..3-year warranty included

Eaton eATS ePDUs: Designed for switching non phase synchronized AC power sources, the automatic transfer switch ePDUs intelligent circuitry monitors both inputs, providing a fast switch transfer from primary to secondary source power critical equipment without interruption. These ePDUs assure the highest level of redundancy to mission critical applications..Power distribution unit.Dimensions: 1.7"H x 17.25"W x 9.84"D.Input voltage: 120 V, Frequency: 50 - 60 Hz.Input current: 16 A.Power capacity: 1.92 kW.Phase: Single phase.Cord length: 10'.Input receptacles: 2 x NEMA 5-20P.Output receptacles: 10 x NEMA 5-20R.Serial interface: RS232.Mounting style: Horizontal.Rack height: 1U.Ethernet interface: 10/100 Ethernet.Certifications and standards: UL Listed, FCC.3 years standard warranty

1.4kW 120V single-phase switched 1U PDU.8 individually controllable NEMA 5-15R outlets.Built-in Java-free LX Platform interface for remote access 24/7