Eaton EPDU
6 results
Eaton G3 Metered Input ePDUs provide a best-in-class design featureing billing grade accuracy monitoring of input and branch circuits on a local LCD pixel display or over a network connection. The high accuracy meter will measure current, voltage, power and energy for load balancing, capacity planning, efficiency monitoring and energy usage reporting. Designed for IT and data center applications means high reliability and a robust design made for high operating temperatures found in containment or networking closets. Advanced LCD pixel display for local display of current, voltage, power, energy and menu setup of parameters such as IP address or display rotation High operating temperature (140F / 60C) for containment or hot network closet environments Hot-swap meter for servicability of without removing power to the rack +/- 1% billing grade accuracy for high accuracy reporting of energy usage Daisy chain of IP addresses allows four devices to share one network connection Color coded outlet sections simplify load balancing.Clearly labeled circuits simplify load balancing.Easy read digital ammeter reduces local monitoring time.High density units support up to 25 1U/2U servers or three blade server chassis.New ePDU G3 models feature ±1% billing grade accuracy, an advanced LCD pixel display, a hot-swap meter and the ability to daisy chain four ePDUs to share the same network connection and IP address.Reading available via Ethernet connection over a network.UL Listed (UL489) branch circuit breakers meet UL60950-1 Edition requirements
Eaton Metered Input ePDUs provide remote monitoring of the current draw of individual sections via network communication. This capability, combined with state-of-the-art software allows you to aggregate the information from many ePDUs in one location. A local display is also available for phase balancing and for easy start-up and provisioning of servers. New ePDU G3 Metered Input models feature best-in-class technologies, including ±1% billing grade accuracy, an advanced LCD pixel display, a hot-swap meter and the ability to daisy chain four ePDUs to share the same network connection and IP address..Network (RJ-45): Yes.Input Voltage: 230 V AC.Output Voltage: 230 V AC
The Eaton ® EMI310-10 G3 monitored ePDU facilitates billing grade accuracy monitoring of input and branch circuits on a local LCD pixel display or over a network connection. The high accuracy meter of this ePDU, is perfect for measuring current, voltage, power and energy for load balancing, capacity planning, efficiency monitoring and energy usage reporting. It is great for IT and data center applications. This ePDU incorporates daisy chain that allows four ePDUs to share the same network connection and IP address. It can operate in high operating temperature environments up to 140 deg F. This ePDU has a input voltage rating of 120/208 V and power rating of 8.64 kVA..Enclosure power distribution unit offers reliable and cost effective power distribution.Dimensions: 66.5"(H) x 2.1"(W) x 2.1"(D).Receptacles: NEMA L21-30P input, 30 x IEC 60320 C13, six IEC 60320 C19, one NEMA 5-20R output, 10/100 Ethernet interface, Serial interface: RS232.Voltage: 120/208 VAC input at 50/60 Hz, Input current: 24 A, Circuit breakers: (3) 20 A.Output capacity: 8.64 kW.Input cord length: 10'.Form factor: Vertical (0U).Has high accuracy meter that measures current, voltage, power and energy for load balancing, capacity planning & energy usage reporting.High operating temperature (140 deg F/60 deg C) for containment or hot network closet environments.Perfect for IT and data center applications.Allows +/- 1 percent billing grade accuracy for high accuracy reporting of energy usage.Advanced LCD pixel display is perfect to display current, voltage, power and menu setup of parameters including IP address or display rotation.Hot-swap meter offers easy serviceability without removing power to the rack.Meets UL ITE 60950-1 and FCC standards or certifications
Eaton eATS ePDUs: Designed for switching non phase synchronized AC power sources, the automatic transfer switch ePDUs intelligent circuitry monitors both inputs, providing a fast switch transfer from primary to secondary source power critical equipment without interruption. These ePDUs assure the highest level of redundancy to mission critical applications..Power distribution unit.Dimensions: 1.7"H x 17.25"W x 9.84"D.Input voltage: 120 V, Frequency: 50 - 60 Hz.Input current: 16 A.Power capacity: 1.92 kW.Phase: Single phase.Cord length: 10'.Input receptacles: 2 x NEMA 5-20P.Output receptacles: 10 x NEMA 5-20R.Serial interface: RS232.Mounting style: Horizontal.Rack height: 1U.Ethernet interface: 10/100 Ethernet.Certifications and standards: UL Listed, FCC.3 years standard warranty
The Eaton G3 EMA107-10 single-phase managed ePDU facilitates billing grade accuracy monitoring of input and branch circuits on a local LCD pixel display or over a network connection. The high accuracy meter of this ePDU, is perfect for measuring current, voltage, power and energy for load balancing. It also measures capacity planning, efficiency monitoring and energy usage reporting. This ePDU uses a daisy chain that allows four ePDUs to share the same network connection and IP address. It can operate in high operating temperature environments up to 140 degrees F, and has an input and output voltage rating of 230 VAC and power rating of 5.76 kVA..Enclosure power distribution unit offers reliable and cost effective power distribution.Dimensions: 66.5"(H) x 2.1"(W) x 2.1"(D).Receptacles: one NEMA L6-30P input, 20 x IEC 60320 C13 and four IEC 60320 C19 output.Voltage: 230 VAC input/output at 50/60 Hz, Input current: 24 A, Circuit breakers: (2) 20 A.Output capacity: 5.76 kW.Input cord length: 10'.Form factor: Vertical (0U).Has high accuracy meter that measures current, voltage, power and energy for load balancing, capacity planning & energy usage reporting.High operating temperature (140 deg F/60 deg C) for containment or hot network closet environments.Outlet switching allows for on/off/reboot of individual outlets reducing the cost of managing remote or local IT data center environments.IEC outlet grip plug retention secures plugs in place using standard cables.Has outlet switching for on, off and reboot control to minimize management costs and outlet level metering to +/- 1 percent billing grade accuracy.Daisy chain of IP addresses enables four devices to share one network connection to minimize up to 75 percent network installation costs.cUL Certified
Eaton eATS ePDUs: Designed for switching non phase synchronized AC power sources, the automatic transfer switch ePDUs intelligent circuitry monitors both inputs, providing a fast switch transfer from primary to secondary source power critical equipment without interruption. These ePDUs assure the highest level of redundancy to mission critical applications..Power distribution unit.Dimensions: 1.7"H x 17.25"W x 9.84"D.Input voltage: 120 V, Frequency: 50 - 60 Hz.Input current: 12 A.Power capacity: 1.44 kW.Phase: Single phase.Cord length: 10'.Input receptacles: 2 x NEMA 5-15P.Output receptacles: 10 x NEMA 5-15R.Serial interface: RS232.Mounting style: Horizontal.Rack height: 1U.Ethernet interface: 10/100 Ethernet.Certifications and standards: UL Listed, FCC.3 years standard warranty
You May Also Like
Eaton is an intelligent power management company dedicated to improving the quality of life and protecting the environment for people everywhere..Single-phase managed rack power distribution unit.Nominal input voltage: 120V; frequency: 50/60Hz.Amperage rating: 12A.Dimensions: 8"H x 1.69"W x 19"D.Features eight 5-20R outlets.Equipped with a 10' cable.3-year manufacturer limited warranty
Eaton is an intelligent power management company dedicated to improving the quality of life and protecting the environment for people everywhere..Single-phase managed rack power distribution unit.Nominal input voltage: 120V; frequency: 50/60Hz.Amperage rating: 12A.Dimensions: 8"H x 1.69"W x 19"D.Features eight 5-15R outlets.Equipped with a 10' cable.3-year manufacturer limited warranty
The Eaton® EMA108-10 G3 managed Power distribution unit in black, provides a billing grade accuracy monitoring at the outlet level on a local LCD pixel display or over a network connection. The high accuracy meter will measure voltage, current, power and energy for load balancing, capacity planning, efficiency monitoring and energy usage reporting..Power distribution unit offers a range of basic and metered PDUs for any application.Dimensions: 66.5"H x 2.05"W x 2.56"D.Comes in black color.Input: (1) NEMA L5-30P, output: (24) NEMA 5-20R.Input current: 24 A, frequency: 50 - 60 Hz.Input voltage: 120 V, output voltage: 120 V, single phase.Form factor: Vertical.Rack height: 0U.Serial interface: RS232, Ethernet interface: 10/100 Ethernet.Cable length: 10'.Outlet control, voltage monitoring, current monitoring: Input, section, outlet, +/- 1%.Enables on/off/reboot capabilities for a single piece of equipment with outlet-level control.Circuit breakers: (2) 20 A.Manages entire environment remotely over the network from a single interface.Meets UL, cUL standards
Eaton EMI104-10 Metered input power distribution unit performs accurate monitoring of input and branch circuits on a local LCD pixel display. Robust design makes power distribution unit perfect for high operating temperatures. Rack mountable and features LCD display. Suitable to measure current, voltage, power and energy for load balancing, energy usage reporting, capacity planning as well as efficiency monitoring. Has a power rating of 5.76 kW, maximum current rating of 24 A and frequency rating of 50 - 60 Hz..Power distribution unit is great for IT and data center applications.Measures 77.6" x 7.7" x 9.3".Features vertical mounting style and has cable length of 10' for reliable operation.Current rating of 24 A for convenience.Optional EMP001 Environmental interface and RS232 serial interface.Meter measures current, voltage, power and energy for load balancing.Has robust design made for high operating temperatures.Meets UL certification and standards.Eaton Metered input power distribution unit is perfect for IT and data center applications. Contains a 10' cable for easy connectivity.
3U PowerPass distrbution module includes 4-post rail kit and joining brackets for tower configuration..PowerPass distrbution module.Dimensions: 5.1"H (3U) x 17.3"W x 25.4"D.Color: Black and silver.Cord length: 6'.Rack height: 3U.Inclues: 9PXPPDM1 3U PowerPass distrbution module, 4-post rail kit, quick start guide, joining brackets for tower configuration.Weight: 97 lb.2 years warranty
Tripp Lite™ Power distribution unit is made of sheet metal for durability and has a input/output voltage rating of 100 - 240 V. Power distribution unit is rack mountable and supplies equipment with continuous power from any protected UPS..Single phase NEMA L6-20P, IEC-320 C20 3.7m 20A 100, 120, 127, 200, 208, 230, 240 VAC input.50/60 Hz frequency.Outlet connector: 12 x IEC-C13, 2 x IEC-C19.Black.Cord length: 12'.Output voltage: 100 - 240 V.Material of construction: Sheet metal.Maximum input current: 20A, PDU input voltage 100, 120, 127, 200, 208, 230, 240V, Voltage compatibility: 100, 120, 127, 200, 208, 230, 240 VAC.Dimensions: 1.75"(H) x 17.25"(W) x 3.75"(D).Outlets center to center measurement: Distance between front (C13) outlets = 28.75mm, Distance between rear (C19) outlets = 55mm, Distance between rear (C13) outlets = 28.75mm, TVSS grounding: Rear grounding lug.Style: Rackmount, vertical rackmount, wallmount/under counter, Form factors supported: 1U rackmount, 0U vertical rackmount, wall-mount, and under-counter installation.Ideal for datacenters, network closets, equipment racks and a wide variety of other application types, high quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDUH20DV PDU rackmount PDU, owner's manual.Certifications and standards: Tested to UL 60950 (USA), CSA (Canada), CE (EU), RoHS compliant.Weight: 3.75 lbs..Warranty: 5 years limited.Tripp Lite Power Distribution Unit - Equal Power Distribution
Eaton 5P 1950VA 120V Rack/Tower 2U UPS, 8-Outlets, Black (5P2200RT).Input voltage: 120 VAC.Output voltage: 102 - 132 VAC.Power capacity: 1.92 kW / 1.95 kVA.Form factor: 2U tower/rack-mountable.Interface/ports: Serial port, USB, 1 x expansion slot.Plug/connector type: NEMA 5-20P, receptacles: 8 x NEMA 5-20R.Battery: Maintenance free battery characteristics, sealed lead acid battery chemistry, Backup/run time: 3 min for full load, 9 min for half load and hot-swappable.Operating temperature: 32 - 104 deg F, Storage: 5 - 122 deg F, Relative humidity: 20 - 95% non condensing, altitude: Up to 10000' without de-rating.Audible noise: <45 dBA.Topology: Line interactive, Heat dissipation: Line: 305 BTU, battery: 2047 BTU.Frequency: 50/60 Hz (auto-sensing) input, 50/60 Hz + or -0.1% (autosensing) output, Input power factor: 0.98.Cord length: 8' input.Black.Voltage regulation: 102 - 132 VAC on utility, -10%, +6% of nominal on battery, transfer time: 1 - 4 ms typical.Input voltage range: 89 - 151 VAC (adjustable to 70 - 153 VAC), 120 VAC (adjustable to 100/120/127 VAC) nominal.Includes 5P 1950 VA tower/rack-mountable UPS, user manual CD, tower pedestals, intelligent power software suite CD, quick start guide, RS-232 serial cable, USB cable, Phillips head screw driver, four post rail kit.compliants and standards: UL1778, UL497A, cUL, UL, FCC Part 15 subpart B Class A.Weight: 65 lbs..Warranty: 3 years on electronics, 3 years on batteries with registration.Eaton® 5P 1950 VA Tower/rack mountable UPS in black color has 8 x NEMA 5-20R receptacles and has sealed lead acid battery chemistry.
The Tripp Lite PDUMH15-ISO 1.44 kW single-phase metered PDU with isobar surge suppression, provides real-time local reporting of load level in amps and noise suppression. It features a digital display that shows output current to prevent circuit overload when additional equipment is added and has a set of three front-panel LEDs to show wiring fault, protection present and line OK status. This PDU has a rugged all-metal housing and offers rackmount installation with included mounting accessories. It is compatible with 120 VAC sine wave input. The 1U PDU features NEMA 5-15P 15 A 120 V input plug with 15' cord and 14 NEMA 5-15R outlets..Power distribution unit offers reliable and cost effective power distribution.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).Sheet metal construction for long lasting durability.Receptacles: NEMA 5-15P input and 14 x NEMA 5-15R output.Voltage: 120 VAC at 50/60 Hz input/output, Input current: 15 A.Output capacity: 1.44 kW.Input cord length: 15'.Form factor: Horizontal (1U, 2U).Offers overload and surge protection.AC suppression joule rating: 3840 J, AC suppression surge current rating: 60000 A, Clamping voltage (RMS): 140 V.Front panel LEDs: Set of three diagnostic LEDs report LINE OK (green), suppressor or wiring FAULT (red) and PROTECTION PRESENT (green) status.Storage temperature: 5 - 122 deg F (-15 - 50 deg C), Relative humidity: 5 - 95 percent non-condensing, Operating elevation: 0 - 10000'.Built-in two digit visual meter continuously reports PDU load level in amps.Offers SOBAR Network-grade AC surge and noise suppression with EMI/RFI filtering.Contains owner's manual with warranty information.Meets UL1449 3rd Edition (USA) and CSA (Canada), RoHS standards or certifications.Weight: 4.6 lbs..Comes with 2 years limited warranty
TRIPP LITE 5-15/20R 28 Outlet 20 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display. It enables visual monitoring of PDU load levels to prevent overloads as additional equipment is added. Also offers reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source. High quality design includes rugged all-metal housing and secure rackmount installation with included mounting accessories..Single phase NEMA 5-20P / NEMA L5-20P 15 ft 20 A 100 - 127 V input.120 V 50/60 Hz output.28 NEMA 5-15/20R outlet connector.20 A overload protection.0U vertical rack mount.2 digit lighted meter reports combined total output current in amps.Package includes PDUMV20 metered vertical PDU, (1) L5-20P to 5-20P plug adapter, mounting hardware and spare mounting buttons, instruction manual with warranty information.Includes 20 A circuit breaker and lighted power switch inside a transparent protective cover.Digital ammeter display indicator.Toolless installation supported in button-mount compatible equipment racks.Bolt-down installation brackets support installation in other racks and additional surfaces.Typical applications: Ideal means of powering networking equipment in datacenters, computer rooms and network closets.Certifications: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.6 lbs.1 3/4"(H) x 60"(W) x 1 1/4"(D).Lifetime limited warranty.TRIPP LITE 5-15/20R 28 Outlet 20 A 100 - 127 V Metered Power Distribution Unit offers real-time local reporting of load level in amps via built-in digital display.
Tripp Lite™ Power distribution unit is made of sheet metal for durability and has a input/output voltage rating of 120 V. Power distribution unit is rack mountable and supplies equipment with continuous power from any protected UPS..Single phase NEMA L5-30P 4.57m 30A 120 VAC input.50/60 Hz frequency.Outlet connector: 12 x NEMA 5-15/20R.Black.Cord length: 15'.Output voltage: 120 V, Overload protection: Two 20A breakers protect 6 outlets each.Material of construction: Sheet metal.Maximum input current: 30A, PDU input voltage 100, 120, 127V, Voltage compatibility: 120 VAC.Dimensions: 1.75"(H) x 17.5"(W) x 6.5"(D).Outlets center to center measurement: Distance between outlets = 30.20mm, Distance between Bank 1 and Bank 2 = 41.45mm, TVSS grounding: Rear grounding lug.Style: Rackmount, vertical rackmount, wallmount/under counter, Form factors supported: 1U rackmount, 0U vertical rackmount, wall-mount, and under-counter installation.Outlets are arranged in two loading banks, each with separate 20A breaker protection, highly reliable design includes rugged all-metal housing and secure rackmount installation with included mounting accessories.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Ideal means of powering networking equipment in datacenters, computer rooms and network closets, supplies equipment with continuous power from any protected UPS, generator or mains input power source.Package contents: PDUMH30 metered rackmount PDU, owner's manual with warranty information.Certifications and standards: Tested to UL60950-1 (USA) and CAN/CSA C22.2 No. 60950-1-03 (Canada), RoHS compliant.Weight: 7 lbs..Warranty: 2 years limited.Tripp Lite Power Distribution Unit - Ideal for Powering Servers
Tripp Lite Single phase basic power distribution unit can be 1U/0U vertical rack mounted. Unit has adjustable mounting brackets to offer easy installation..Single phase IEC-320 C20 16 A 100 - 240 V input.Input voltage: 100 - 240 V, frequency required: 50/60 Hz output.Outlet connector: 12 IEC C13, 2 IEC-C19.Overload protection: 16 A.1U/0U vertical rack mount.Package includes: PDU12IEC rackmount power strip, warranty information, instruction manual.Mounting flanges support installation in 2 and 4 post racks, with additional support for wall-mount and under-counter installation formats.Back panel grounding lug.Reversible housing; 4 1/4" depth.Typical applications: Internetworking, PC systems, telecommunications, audio/video, security, sound reinforcement and more. Ideal for distribution of UPS, generator or commercially derived AC power to protected equipment.Weight: 3.2 lbs..Dimensions: 1 3/4"(H) x 17 1/2"(W) x 4 1/2"(D).limited lifetime mfr. warranty.Tripp Lite Sigle Phase Basic Power Distribution Unit offers reliable rackmount power distribution. It supplies equipment with continuous power from any protected UPS, generator or mains input power source.
The ATS will maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails, the ATS will switch over to the secondary power source until primary input is restored and stable..Single phase IEC-320 C20 12' 20 A 200 - 240 V input.200 - 240 V 50/60 Hz output.Outlet connector: 8 IEC-C13, 2 IEC-C19.1U horizontal rack mount.Package includes: switch, metered PDU with ATS support, set of 2 C19 to C20 12'/ 3.7 m power cables, user manual with warranty information.2 digit display reports power consumption in amps.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable.2 - 7 ms transfer time.Switched outlets and ethernet interface supports individual outlet control on a real-time or programmable basis and user-specified alarm notification thresholds for all reported site power conditions.DHCP/Manual configuration support.Supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Outlets are factory programmed for sequential turn-on at 250 ms intervals when the PDU is first energized.LEDs confirm power availability on both input lines and for each output receptacle.Typical applications: Ideal for configurations requiring a simple PDU that displays power consumption in amps.Certifications: Tested to UL 60950 (USA, canada), CE (europe), class A (emissions), NOM (mexico), RoHS complaint.Weight: 10.3 lbs..Dimensions: 1.72"(H) x 17.3"(W) x 14.8"(D).2 years limited Mrf. warranty.Tripp Lite Sigle Phase Switched Power Distribution unit provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources.
The Tripp Lite PDUMV20-72 1.9 kW single-phase metered PDU provides real-time local reporting of load level in amps through built-in digital display. This PDU provides multi-outlet power distribution from any protected UPS, generator or mains input power source. It features rugged all-metal housing, 36 NEMA 5-15/20R output receptacles and offers secure rackmount installation with included mounting accessories. This PDU comes with NEMA L5-20P input plug with 15' line cord and 5-20P adapter. It contains 20 A circuit breaker and lighted power switch inside a transparent protective cover..Power distribution unit offers reliable and cost effective power distribution.Dimensions: 72"(H) x 1.8"(W) x 1.3"(D).Metal construction for long lasting durability.Receptacles: NEMA L5-20P input and 36 x NEMA 5-15/20R output.Voltage: 120 VAC at 50/60 Hz input/output, Input current: 20 A.Output capacity: 1.9 kW.Input cord length: 15'.Form factor: Vertical.Offers overload protection.Enables visual monitoring of PDU load levels to avoid overloads.Provides reliable rackmount multi-outlet power distribution from any protected UPS, generator or mains input power source.High-quality design incorporates rugged all-metal housing and secure rack mount installation with available mounting accessories.Meets UL60950-1 (USA), UL/CSA60950-1 (Canada), NOM (Mexico), FCC Class A (Emissions), RoHS standards or certifications.Weight: 5.51 lbs..Comes with 2 years limited warranty
The Tripp Lite PDUMH30HVNET 5.8 kW single-phase digital switched metered PDU supports 30 A maximum capacity at 208/240 V. It features L6-30P input plug and 16 C13 switched outlets arranged in two separately breakered eight outlet banks. Visual and remote current monitoring of this PDU, tracks the current for each eight outlet bank separately. This 2U rackmount PDU comes with cord retention bracket to plug and power vital network equipment. It provides advanced network control and monitoring with turn on/off, recycle or lock-out power to each individual receptacle, monitor site electrical conditions as well as remotely monitor output power consumption..Power distribution unit offers reliable and cost effective power distribution.Dimensions: 3 1/2"(H) x 17 1/2"(W) x 12 1/2"(D).Metal construction for long lasting durability.Receptacles: one NEMA L6-30P input and 16 x IEC 320 EN 60320 C13 output.Voltage: 208/240 VAC input/output at 50/60 Hz, Input current: 30 A.Output capacity: 5.8 kW.Input cord length: 12'.Form factor: Horizontal (1U, 2U).Offers overload protection.Front panel LEDs: 16 power availability LEDs confirm power off/on status for each built-in outlet.Storage temperature: 5 - 122 deg F (-15 - 50 deg C), Relative humidity: 5 - 95 percent non-condensing, Operating elevation: 0 - 10000'.Offers programmable or real-time outlet power control via built-in web/network monitoring and control card.Management: Protocols- HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP, BOOTP and NTP.The 2U rack mount switched PDU has digital current monitoring, remote control and temperature/humidity monitoring capability.Assures ability to turn on, turn off, recycle or lock-out power to each individual outlet easily.Contains rackmount PDU and 4-post compatible mounting brackets.Meets UL 60950-1 (USA, Canada), Class A (Emissions), RoHS, TAA and NOM (Mexico) standards or certifications.Weight: 13.8 lbs..Comes with 2 years limited warranty
TRIPP LITE 5-15R 8 Outlet 15 A 100 - 127 V Metered Power Distribution Unit provides a redundant power option for single-corded network devices. The dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. It enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. The ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. The front input LED's display primary or secondary power availability..Single phase NEMA 5-15P 12 ft 15 A 100 - 127 V input.120 V 60 Hz output.8 NEMA 5-15R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached 5-15P input power cord, detachable C13 to NEMA 5-15P 12 ft/3.6m secondary input cord, installable 1U mounting brackets, user manuals with warranty information.2 digit display reports output power consumption in amps.Super-fast switchover between primary and secondary power sources occurs in 2-7 milliseconds.Front panel LEDs confirm power availability on both input lines.Typical applications: Ideal means to provide single-corded network gear a redundant power option.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and st.ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported.Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported.On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup.Indicator type: 10 front panel LEDs display power on - off status for each outlet, plus 3 LEDs for power status on each input line cord, digital current meter displays output power consumption in amps.Certifications: Tested to UL 60950-1 (USA), CSA (Canada), Class A (Emissions), NOM (Mexico), RoHS compliant.11 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.TRIPP LITE 5-15R 8 Outlet 15 A 100 - 127 V Metered Power Distribution Unit provides a redundant power option for critical networking equipment with a single input power cord.
TRIPP LITE 5-15/20R 16 Outlet 20 A 100 - 127 V Metered Power Distribution Unit provides a redundant power option for single-corded network devices. The dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. It enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. The ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. The front input LED's display primary or secondary power availability..Single phase NEMA 5-20P / NEMA L5-20P 12 ft 20 A 100 - 127 V input.120 V 60 Hz output.16 NEMA 5-15/20R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached L5-20P primary input cord, detachable C19 to NEMA L5-20P secondary input cord, set of two L5-20R to 5-20P plug adapters, 1U mounting brackets, user manual with warranty information.2 digit display reports output power consumption in amps.Super-fast switchover between primary and secondary power sources occurs in 2-7 milliseconds.Front panel LEDs confirm power availability on both input lines.Typical applications: Ideal means to provide single-corded network gear a redundant power option.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails or becomes unstable, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and st.ATS configurations enable fault-tolerant, hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system (in a two-UPS environment, the primary input cable must be supported.Advanced ATS configurations utilizing separate mains circuits, backup generators and even separate out of phase utility power grid feeds are fully supported.On-board ATS processor constantly evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup.Indicator type: 16 front panel LEDs display power on - off status for each outlet, plus 2 LEDs for power status on each input line cord, digital current meter display shows total load consumption of connected equipment in amps.Certifications: Tested to UL 60950 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS complaint.12.2 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.TRIPP LITE 5-15/20R 16 Outlet 20 A 100 - 127 V Metered Power Distribution Unit provides redundant power option for critical networking equipment with a single input power cord.