Fiber Optic Cables for LAN

StarTech Multimode LC/UPC to LC/UPC OM4 fiber optic cable enables 40/100G network connections. The push-pull tabs on each connector ensure quick connection and removal, facilitating accurate installation in high connection density environments. The bend-insensitive fiber and molded strain reliefs support cable runs requiring micro/macro bends while maintaining low attenuation. The retractable strain-relief housings enable toolless in-field polarity swapping. Color-coded LC-Duplex connectors ensure error-free polarity configuration..Multimode OM4 fiber optic cable enables 40/100G network connections.Cable length is 13.1'.Contains two fiber optic LC duplex connectors.Made of polypropylene in aqua with straight white connectors.Supports 10/40/100G networks; backward compatible with OM3.Can be uses in 40/100 Gigabit Ethernet and fiber architecture.High micro-bending resistance facilitates tight bends in intricate environments, perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.Push-pull tab design provides easy access for precise insertion/removal in high-density installations.Retractable connector housings for toolless polarity swapping.LC/LC-UPC ends for improved return loss over PC polish.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend.Safe for enclosed/poorly ventilated spaces.Great for 850nm and 1300nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and LED sources.Color-coded LC-Duplex connectors ensure error-free polarity configuration.Lifetime manufacturer limited warranty

OM5 LC to LC multimode duplex fiber optic patch cable by StarTech facilitates connectivity across 40G and 100G networks. It supports SWDM (Shortwave Wavelength Division Multiplexing) across an extended wavelength range of 850-953nm VCSEL, enhancing signal quality and performance capacity over OM4. Precision-manufactured ceramic ferrules ensure correct fiber alignment to prevent connectivity issues and minimize insertion loss. Designed for reliability in high-density network applications, the LC to LC UPC polished fiber ends greatly improves return loss characteristics over older PC polishing techniques. The Laser-Optimized Multi-Mode Fiber (LOMMF) OM5 fiber patch cable is perfect for 850-953nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and 1300 nm LED sources..Enhance the performance capabilities of SWDM applications with this OM5 fiber cable.Cable length: 49.2'.LC/LC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in Aramid-reinforced green jacket for a loaded bend radius of 6cm and 3cm when unloaded.Multimode OM5 fiber cable supports 10/40/100G networks and backward compatible with OM4/OM3.Perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.LSZH jacket emits low toxic fumes if combusted and safe for enclosed/poorly ventilated spaces.Attenuation value under 2.4dB/km outperforms industry standards.High micro-bend resistance facilitates tight bends in complex installations.Short Wavelength Division Multiplexing (SWDM) enables extended 850-953nm wavelength support for greater channel isolation, enhancing performance capacity beyond OM4 cables.Zipcord design, color-coded connectors for polarity.Lifetime manufacturer limited warranty

StarTech.com® 50/125 micrometer Duplex multimode fiber optic cable is 3.28' long and is suitable for high performance patch and fiber data distribution systems. Transmits data at a speed of 10 Gb/s. Cable has male LC network connectors on the first and second end for providing smooth connection between fiber networking devices. Aqua cord cable is suitable for high bandwidth data transmissions over 10 gigabit Ethernet and fiber channel network. Perfect solution for fiber cable that runs between multiple backbone switches, hubs, routers and higher end networking equipment. Molded connector cable has flame retardant low smoke zero halogen jacket for optimal insulation and ensures minimal smoke, toxicity as well as corrosion when exposed to high sources of heat. Compatible with 850nm VCSEL source..Fiber optic cable is suitable for data applications requiring high speed data transmission.A convenient length of 3.28' for ease of installation.Features 2 x LC male network first end and 2 x LC male network second end connectors for secure data transmission.StarTech.com® A50FBLCLC1 3.28' Aqua laser-optimized network cable with LC male connectivity allows you to quickly transfer data. Supports data transfer speed rate of up to 10 Gb/s.

StarTech Multimode LC/UPC to LC/UPC OM4 fiber optic cable enables 40/100G network connections. The push-pull tabs on each connector ensure quick connection and removal, facilitating accurate installation in high connection density environments. The bend-insensitive fiber and molded strain reliefs support cable runs requiring micro/macro bends while maintaining low attenuation. The retractable strain-relief housings enable toolless in-field polarity swapping. Color-coded LC-Duplex connectors ensure error-free polarity configuration..Multimode OM4 fiber optic cable enables 40/100G network connections.Cable length is 9.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in aqua with straight white connectors.Supports 10/40/100G networks; backward compatible with OM3.Can be uses in 40/100 Gigabit Ethernet and fiber architecture.High micro-bending resistance facilitates tight bends in intricate environments, perfect for fiber switches/servers, SANs, and SFP+/QSFP+/QSFP28 modules.Push-pull tab design provides easy access for precise insertion/removal in high-density installations.Retractable connector housings for toolless polarity swapping.LC/LC-UPC ends for improved return loss over PC polish.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend.Safe for enclosed/poorly ventilated spaces.Great for 850nm and 1300nm Vertical-Cavity Surface-Emitting Laser (VCSEL) and LED sources.Color-coded LC-Duplex connectors ensure error-free polarity configuration.Lifetime manufacturer limited warranty

AddOn® 13.12' Multi-mode fiber patch cable in aqua color is ideally designed for ethernet, multimedia or communication applications. Cable offers higher speeds, increased bandwidth and 10GB transfers up to 300 m utilizing an 850 nm VCSEL source..Cable type/connection type: Fiber optic.Patch cable is suited for LAN's or SAN's, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc.Cable length: 13.12'.Aqua.Connector on first end: 2 x LC male network, Connector on second end: 2 x LC male network.Core/cladding diameter: 50/125 um.Fiber optic mode: Multi-mode.Features: Halogen-free, laser-optimized multimode fiber (LOMMF).High quality LOMM (50/125) patch cable is specifically designed for ethernet, multimedia, or communication applications, and is intended for use with 10Gb applications.Low-smoke zero-halogen jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduit.Patch cables are 100% compliant for all of our networking needs.Provide higher speeds and increased bandwidth, compared to conventional twisted-pair copper cable.Each cable is 100% optically tested for insertion loss before you take ownership.Provides 10 gigabit transfers up to 300 meters utilizing an 850nm VCSEL source.Optical multimode 4 (OM4) fiber supports 2000 MHz/km EMB at 850 nm.Warranty: Lifetime limited.AddOn® 4m fiber duplex LC/LC patch cable is specifically designed for ethernet, multimedia or communication applications and is intended for use with 10 Gb applications.

25m (82ft) LC/UPC to LC/UPC OM4 Multimode Fiber Optic Cable, 50/125µm LOMMF/VCSEL Zipcord Fiber, 100G Networks, Low Insertion Loss, LSZH Fiber Patch Cord.OM4 Laser-Optimized Multimode Fiber Cable is immune to EMI and supports up to 100 Gbps Ethernet; Full-duplex zip-cord with color-coded TX/RX connectors enable quick visual identification of polarity and conversion to simplex cabling.LC/LC connectors with UPC polished ends significantly improves return loss over PC polish; Robust molded connector strain reliefs minimizes wear from bending; Protective Aramid fiber for increased tensile strength.Individually tested for signal integrity; LSZH (low smoke zero halogen) jacket does not emit toxic fumes if combusted; Safe for enclosed/poorly ventilated spaces; Attenuation value under 2.3dB/km meets or exceeds industry standards.OM4 LC/LC multimode cable supports 1/10/40/100 Gbps networks; Backward compatible with OM3; For high-density network applications such as SANs, data servers, fiber switches, SFP+, QSFP+, and QSFP28 transceivers.SPECS: 25m (82ft); Color: Aqua (OM4); LC/LC UPC; 50/125µm Core/Cladding; 850nm or 1300nm LED/VCSEL; Modal Bandwidth: 2000MHz•km at 850nm; Cable OD: 2.9mm; Bend Radius: Static 1.2in (3cm), Dynamic 2.4in (6cm); Backed for Life.This multimode 50/125µm fiber optic patch cord is backward compatible with OM3 and 1/10/40 Gbps networks, ensuring a reliable connection with legacy fiber environments..Housed in a LSZH (Low-Smoke, Zero-Halogen) flame-retardant jacket, this OM4 fiber cable emits low smoke and toxic fumes when exposed to high heat or in the event of a fire. It enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where building codes are a consideration..Each OM4 fiber cable is also individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability..Use in 40/100 Gigabit Ethernet and fiber-channel applications.The LC to LC Multimode Duplex Fiber Optic Patch cable facilitates reliable connectivity across 40 and 100 Gigabit networks.

The Fluke Networks® SMC-9-SCST 524.93' Single mode fiber optic cable with SC male connectors on both the ends is compatible with OptiFiber Pro OTDR and DTX-1800 OTDR..Fiber optic cable is perfect for network devices.Cable length: 524.93'.Connector on first end: SC male network.Connector on second end: ST male network.Compatible with OptiFiber Pro OTDR and DTX-1800 OTDR.Cable type: Fiber optic.Fiber optic mode: Single-mode

Startech® 6.56' LC To LC Multimode 50/125 Duplex LSZH Fiber Patch Cable, Aqua.Fiber optic cable is suitable for data applications requiring high speed data transmission.A convenient length of 6.56' for ease of installation.Features 2 x LC male network first end and 2 x LC male network second end connectors for secure data transmission.StarTech.com® A50FBLCLC2 6.56' Aqua laser-optimized network cable with LC male connectivity allows you to quickly transfer data. Supports data transfer speed rate of up to 10 Gb/s.

This 2m LC/SC Duplex 50/125 Multimode Fiber Patch Cable provides a reliable connection between networking devices for high-speed long distance networks; tested/certified to be within acceptable optical insertion loss limits. Lifetime Warranty..Can maximize wiring conduit usage while minimizing installation problems.Fiber Optic cables provide a higher quality signal over a greater distance.Fiber Optic cables are an ultimate solution for high-speed data transmission.Backed by StarTech.com lifetime warranty.Connectors offer greater durability in resisting pulls, strains, and impacts during cable installation and maintentance.Immune to electricty interference.Attenuation loss meets or exceeds industry standards

Because of its immunity to electronic interference and its greater speeds over longer distances, fiber optic cabling has become the conduit of choice for high speed network communications. Monoprice is proud to offer a full line of high-quality Single-mode and Multi-mode duplex cables using optical fibers made by Corning. This is a "Yellow" single-mode cable with a 9 ?m core and 125 ?m cladding diameter. The cable has color-coded Dual LC connectors on each end. The cable jacket is OFNR (Optical Fiber, Non-conductive, Riser) rated by UL, which means that it complies with fire safety and insurance requirements and is safe for use within the walls, and between the floors, of commercial class buildings..Supports fast data transfer and efficient power delivery.Built for durability with high-quality materials.Compact design simplifies installation and saves space

StarTech OS2 LC to SC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 6.6'.LC/SC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

Provide a high-performance link between fiber network devices - Duplex Fiber Cable / LC to ST / Multimode Patch Cable - 1m Multimode 62.5/125 Duplex Fiber Patch Cable LC to ST - Ideal solution for data applications requiring high speed data transmission - Guaranteed reliability with a lifetime warranty.Fiber Optic cables are an ultimate solution for high- speed data transmission.Fiber optic cables provide a higher quality signal over a greater distance.Backed by StarTech.com lifetime warranty.Attenuation loss meets or exceeds industry standards

The AddOn® 9.8' laser-optimized OM3 patch cable in aqua, has multi-mode fiber duplex two SC male connectors on first end and two LC male connectors on second end. With low smoke zero halogen jacket, this patch cable offers protection against toxic and corrosive gases in badly ventilated spaces. Featuring 50/125 OHMm core/cladding thickness, this patch cable ensures high performance. It is suitable for use with 10Gb Ethernet applications. The patch cable offers the fire protection needed to run within walls and air plenums, while eliminating the need for conduits..Patch cable for use with 10GB Ethernet applications and it is suited for LANs or SANs.Cable length: 9.8'.Multi-mode fiber (LOMM) duplex two SC male connectors on first end and two LC male connectors on second end.Jacket: Low smoke zero halogen (LSZH).Color: Aqua.Core/cladding: 50/125 OHMm, Standard: OM3.Jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.Provides the fire protection needed to run within walls and air plenums eliminating the need for conduits.Offers higher speeds and increased bandwidth compared to conventional twisted-pair copper cable.Comes with lifetime limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 32.8'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length: 3.3'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

The HP® Premier Flex OM4 32.81' blue fibre optic network cable with 83 percent improved bend performance, has one MPO connector on both ends. Featuring low-smoke zero halogen jacket, this multimode optic patch cable maintains efficient use of space. The patch cable with 50/125 u m core/cladding diameter, is suitable for HP DC SAN director switches, HP SN6000 fibre channel switch and HP StorageWorks MPX200 Multifunction router..Fiber optic network cable for Ethernet applications.Cable length: 32.81'.Connections type: MPO on both ends.Low smoke, zero halogen (LSZH) jacket for durability.Comes in blue color.Effective model bandwidth: 4700 MHz-km at 850 nm, Optical clarity-attenuation (loss/km): 2.3 dB/km.Improved bend performance: 83 percent.Core/cladding: 50/125 u m.Suitable for use with HP DC SAN director switches, HP SN6000 fiber channel switch, HP StorageWorks MPX200 multifunction router.Significantly improved performance under acute bend.Lower maintenance cost and efficient use of space.Meets OFNR, RoHS, REACH certifications or standards

Because of its immunity to electronic interference and its greater speeds over longer distances, fiber optic cabling has become the conduit of choice for high speed network communications. Monoprice is proud to offer a full line of high-quality Single-mode and Multi-mode duplex cables using optical fibers made by Corning. This is an OM3 "Aqua" laser-optimized, multi-mode cable with a 50 ?m core and 125 ?m cladding diameter. The cable has color-coded Dual LC connectors on each end and is ideal for use in 10 Gigabit Ethernet (GbE) networks. The cable jacket is OFNR (Optical Fiber, Non-conductive, Riser) rated by UL, which means that it complies with fire safety and insurance requirements and is safe for use within the walls, and between the floors, of commercial class buildings..Supports fast data transfer and efficient power delivery.Built for durability with high-quality materials.Compact design simplifies installation and saves space

Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment.This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.The 450FBLCLC2 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF).Certifications & Standards: RoHS, WEEE

Fiber Optic Cable, LC/SC, Single Mode, Duplex - 1 meter (9/125 Type) - YellowBecause of its immunity to electronic interference and its greater speeds over longer distances, fiber optic cabling has become the conduit of choice for high speed network communications. Monoprice is proud to offer a full line of high-quality Single-mode and Multi-mode duplex cables using optical fibers made by Corning. This is an "Yellow" single-mode cable with a 9 µm core and 125 µm cladding diameter. The cable has a color-coded Dual LC connector on one end and a Dual SC connector on the other end. The cable jacket is OFNR (Optical Fiber, Non-conductive, Riser) rated by UL, which means that it complies with fire safety and insurance requirements and is safe for use within the walls, and between the floors, of commercial class buildings..Supports fast data transfer and efficient power delivery.Built for durability with high-quality materials.Compact design simplifies installation and saves space

The Multi Mode OM4 cables are designed to support very high transfer speed, the cables are capable of supporting up to 100gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The ALOGIC OM4 Patch Cables are available in various lengths starting from 0.5m to 20m length..Ideal for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, delivering exceptional performance for demanding applications.Compact 1.64ft length for short-distance connections, reducing clutter while maintaining superior signal integrity.Features LC to LC connectors for secure, precise, and low-loss optical signal transmission.Made with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, protected by a durable LSZH jacket and finished in turquoise for easy identification..Supports high-bandwidth applications including 40G/100G Ethernet, ensuring lightning-fast data transfer for mission-critical tasks.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, guaranteeing quality and reliability.2 Years Manufacturer's Warranty

Cisco SFP28 to SFP28 Active Optical Cables are direct-attach fiber assemblies with SFP connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks. AOC cable require BASE-R FEC, or RS-FEC on the host ports. Works with Cisco UCS 2408 Fabric Extender only..SFP28 to SFP28 cable is suitable for very short distances and offers a cost-effective way to connect within racks and across adjacent racks.This Active Optical Cables comes in two meters length.Direct attach assemblies with SFP connectors.Comes in brown.Maximum data transfer rate: 25000 Mbps.Only compatible with the Cisco UCS 2408 fabric extender.AOC cable require BASE-R FEC, or RS-FEC on the host ports

Connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. This fiber optic cable lets you connect 40GBase-SR4, 100GBase-SR10, SFP+ and QSFP+ transceivers in 40 and 100 Gigabit networks. The OM4 cable supports Vertical Cavity Surface Emitting Laser (VCSEL) and LED light sources and is backward compatible with your existing 50/125 equipment. This Aqua OM4 duplex multimode fiber cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity and corrosion when exposed to high sources of heat, in the event of a fire. It's ideal for use in industrial settings, central offices and schools, as well as residential settings where building codes are a consideration.Each OM4 fiber cable is individually tested and certified to be within acceptable optical insertion loss limits for guaranteed compatibility and 100% reliability.The 450FBLCLC3 from StarTech.com is backed by a lifetime warranty..OM4 (50/125) 3500MHz multimode fiber.Backward compatible with your existing 50/125 equipment.Laser-optimized multimode fiber (LOMMF)

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 16.4'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech.com® 50/125 micrometer Duplex multimode fiber optic cable is 16.4' long and is suitable for high performance patch and fiber data distribution systems. Transmits data at a speed of 10 Gb/s. Cable has male LC network connectors on the first and second end for providing smooth connection between fiber networking devices. Aqua cord durable cable design is suitable for high bandwidth data transmissions over 10 gigabit Ethernet and fiber channel network. Perfect solution for fiber cable that runs between multiple backbone switches, hubs, routers and higher end networking equipment. Molded connector cable has flame retardant low smoke zero halogen jacket for optimal insulation and ensures minimal smoke, toxicity as well as corrosion when exposed to high sources of heat..Fiber optic cable is suitable for long-distance networks with mission critical data and broadband systems.A convenient length of 16.4' for ease of installation.Features 2 x LC male at first end and 2 x LC male at second end connectors for secure data transmission.Recommended for maximum data transfer rate of 10 Gb/s.Utilizes copper conductors with a LSZH jacket for optimum installation.StarTech.com® A50FBLCLC5 16.4' Aqua network cable with LC male connectivity on both ends allow you to quickly transfer data. Supports data transfer speed rate of up to 10 Gb/s.

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 9.8'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

Tripp Lite 50/125 micrometer Duplex multi-mode fiber optic patch cable is 33' long and with two conductors is suitable for high performance patch and fiber data distribution systems. Superior quality construction ensures error-free signal transfer. Cable features LC male IEEE 802.3ae network connector at both the ends for efficient connectivity. Cable allows 40/100Gb serial transmission over extended distances in the 850nm wavelength window. Low-smoke zero-halogen jacket in attractive aqua color limits the amount of toxic smoke emitted from combustion and perfect for poorly ventilated areas. Optic cable is suitable for fiber channel applications..Fiber optic cable is suitable for fiber channel (SAN) applications and is perfect to use with VCSEL and LED laser light sources.A convenient length of 33' for ease of installation.Features 2 x LC male first end and 2 x LC male second end connectors for secure data transmission.Recommended for 40/100-Gig ethernet applications.Utilizes LSZH jacket for optimum installation.Compatible to use with PC.Comes in aqua color for a new look.Contains a core/cladding diameter of 50/125 micron for easy connectivity.Uses fiber optic cable for high-speed data transmission.Renders patch cable used to connect your head-ends, central offices and data centers.Consist of 10 meter ( 33ft ) duplex multimode 50/125 aqua OM4 fiber patch cable, LC/LC connectors for secured connectivity.Meets OM4 rated, TIA LOMMF, IEEE 802.3ae, RoHS compliant standards.Comes with limited lifetime warranty.Tripp Lite 33' Aqua fiber optic patch cable with LC male connectivity designed for 40/100-Gb Ethernet applications. Use with VCSEL and LED laser light sources.

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 6.6'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

Discover the ALOGIC fiber optic network cable, a solution designed to meet the demands of modern networking environments. This duplex cable features halogen-free construction and is equipped with LC multi-mode connectors on both ends, ensuring a safe and reliable connection. With a core and cladding diameter of 50 / 125 micron, it supports efficient light transmission for high-speed data communication. The Low Smoke Zero Halogen (LSZH) jacket material not only enhances safety by reducing toxic and corrosive gas emissions but also complies with OM3 and ETL standards, making it a durable and compliant choice for your networking needs..Perfect for high-speed fiber optic connections in enterprise networks and data centers, ensuring reliable LC-to-LC interface integration.Convenient 3.28ft length for tidy, space-efficient installations.Equipped with LC male connectors on both ends for secure and precise connectivity.Constructed with OM3 multimode fiber for excellent bandwidth, featuring a durable LSZH jacket and a bright turquoise color for easy identification..Supports up to 10Gbps high-speed data transfer, making it ideal for modern networking and storage applications.Compatible with LC interface devices, fiber optic transceivers, and OM3-compliant networking hardware.2 Years Manufacturer's Warranty

This is a 2m single-mode fiber (SMF) duplex SC/LC OS1 yellow patch cable. This high quality SMF (9/125) patch cable is specifically designed for ethernet, multimedia, or communication applications, and is intended for use with 10Gb applications. This patch cable is suited for LANs or SANs, and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers, etc. The low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial. It also provides the fire protection needed to run within walls and air plenums eliminating the need for conduits. The injection molding process provides each connection greater durability in resisting pulls, strains, and impacts from cabling installs. They provide higher speeds and increased bandwidth compared to conventional twisted-pair copper cable. Each cable is 100% optically tested for insertion loss before you take ownership. Our patch cables are 100% compliant for all of your networking needs. Our products are guaranteed by federal law to not affect or void OEM warranties..Yellow Duplex LC (Male) to SC (Male) cabling to provide reliable connectivity.2.0m (6.6ft) in length to fit the needs of your application.Complies with all multi-source agreement (MSA) standards to ensure seamless network integration.Application and environment tested and guaranteed to work.Limited Lifetime Warranty.2m LC (Male) to SC (Male) Yellow OS1 Duplex LSZH Single-Mode Fiber (SMF) Patch Cable

Discover the ALOGIC fiber optic network cable, a solution designed for high-speed, reliable network connections. This duplex cable is engineered with a 50 / 125 micron core and cladding diameter, ensuring efficient data transmission and compliance with OM4 standards. The use of Low Smoke Zero Halogen (LSZH) material for the jacket makes it safer for the environment by reducing toxic emissions in case of fire and provides a durable construction for long-term use. Equipped with male LC multi-mode connectors on both ends, it offers easy and secure connections for a wide range of networking equipment. Whether you're setting up a new network or upgrading an existing one, the ALOGIC network cable is a smart choice for performance and safety..Perfect for high-speed fiber optic connections in data centers, enterprise networks, and storage systems, delivering exceptional performance for critical applications.Convenient 4.92ft length for short-distance connections, reducing clutter while maintaining superior signal integrity.LC to LC connectors ensure secure, precise, and low-loss optical signal transmission for maximum efficiency.Built with OM4 multimode fiber for ultra-fast 40Gbps and 100Gbps speeds, featuring a durable LSZH jacket and a turquoise finish for easy identification in complex setups.Supports high-bandwidth applications including 40G/100G Ethernet, ensuring lightning-fast data transfer for demanding workloads.Fully compatible with OM4-rated fiber optic equipment such as transceivers, patch panels, and network hardware.Complies with ISO/IEC 11801 and TIA/EIA standards for structured cabling, guaranteeing quality and reliability.2 Years Manufacturer's Warranty

The AddOn® ADD-LC-LC-1M6MMF LC-to-LC male/male OM1 duplex fiber optic patch cable in orange, is suitable for use with Ethernet, multimedia, communication applications and with 1 Gb applications. This 1 m cable provides higher speeds and increased bandwidth. The multi-mode fiber cable has low smoke zero halogen jacket that provides protection from toxic and corrosive gases in badly ventilated spaces. This cable is perfect for LANs or SANs and for connecting fiber patch panels, hubs, switches, media converters and routers..Patch cable for LANs or SANs and is recommended for connection between fiber patch panels, hubs, switches, media converters and routers.Cable length: 1 m.Connections: 2 x LC male to 2 x LC male.Wired connectivity.Material: LSZH (jacket), conductor: Copper.Network: Gigabit Ethernet.Fiber type: MMF.Core/cladding diameter: 62.5/125 um.Standard: OM1.Comes with limited lifetime warranty.Orange 1 m fiber optic patch cable with LC to LC connectors and low smoke zero halogen (LSZH) jacket protects from toxic and corrosive gases in badly ventilated spaces and other areas where it is most crucial.

The Multi Mode OM1 cables are designed to support Gigabit Fiber & ethernet channel, the cables are capable of supporting 1Gigabit applications up to over 25m length. These Fiber Cables are constructed with the high quality components such as genuine Corning Inficore 3 glass and high grade connectors with ceramic ferrules to ensure the maximum performance accuracy and durability. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. SERVEREDGE 2m LCSC Multi Mode Duplex LSZH Fibre Cable is designed for high-speed data transmission in professional IT and telecommunications environments. With a core/cladding diameter of 62.5/125 microns and a Low Smoke Zero Halogen (LSZH) jacket, it minimizes toxic emissions during fire incidents. This cable is 100% optically tested, making it ideal for data centers, server rooms, and local area networks..Ideal for short-distance fiber optic connections, this cable is perfect for linking LC and SC ports in data centers, enterprise networks, and telecom setups, ensuring dependable and efficient performance.Provides a convenient 6.6 feet (2 meters) length for flexible and clutter-free installations.Equipped with LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Made with 62.5/125 µm OM1 multimode fiber, featuring a Low Smoke Zero Halogen (LSZH) jacket for added safety, and finished in orange for easy identification.Supports up to 1Gbps data transfer speeds, making it suitable for standard networking applications.Fully compatible with OM1 fiber optic systems for reliable connectivity.2-year manufacturer warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single Mode OS2 Fiber Cable is optimized for 100G Networks; Ideal for connecting between servers/switches and data center equipment.131 ft. cable for long distance application.This cable is Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 3.2ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant, Passive.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.26.2ft fiber optic cable for longer distance application.This fiber optic cable features Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, and Bend Resistance.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty

The Multi Mode OM1 cables are designed to support Gigabit Fibre & ethernet channel, the cables are capable of supporting 1Gigabit applications up to over 25m length. These Fibre Cables are constructed with the high quality components such as genuine Corning Inficore 3 glass and high grade connectors with ceramic ferrules to ensure the maximum performance accuracy and durability. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..This fiber optic patch cable is designed for high-speed data applications such as Gigabit Ethernet, Fibre Channel, and ATM, making it ideal for network devices in commercial and industrial environments.The cable measures 16.4 feet (5 meters) in length, providing flexibility for medium-distance connections.It features LC male connectors on one end and SC male connectors on the other, supporting duplex multimode fiber connections for bidirectional data transfer.Constructed with genuine Corning Inficore glass fiber and ceramic ferrules for durability, the cable has a Low Smoke Zero Halogen (LSZH) jacket for safety and comes in a bright orange color for easy identification.Supports data transfer rates up to 1Gbps over OM1 multimode fiber, ensuring reliable performance for high-speed networks.Compatible with devices requiring LC to SC multimode fiber connections for Gigabit Ethernet and similar networking standards.2 Years Manufacturer's Warranty

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Enhance the performance capabilities of CWDM applications with this OS2 fiber cable.Cable length: 3.3'.SC/SC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in aramid-reinforced yellow jacket for a loaded bend radius of 10mm.Single Mode OS2 fiber cable is immune to EMI and optimized for 10/40/100G networks.Perfect for connecting between servers/switches and data center equipment.Meets or exceeds the ITU-T G652.D/G657.A1 and IEC60703-2-50 Type B1.3/B6.a1 standards.LSZH jacket emits low toxic fumes if combusted; safe for enclosed/poorly ventilated spaces.Attenuation value under 0.35dB/km outperforms industry standards.Backward compatible with OS1.High micro-bend resistance facilitates tight bends in complex installations.Coarse Wavelength Division Multiplexing (CWDM) enables extended 1260-1625nm wavelength support for greater channel isolation over long distances.Number-labeled connectors to indicate polarity.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single Mode Simplex OS2 Fiber Cable is immune to EMI and optimized for 40G/100Gbps networks; Supports bi-directional (BiDi) transmission over a single fiber; Ideal for space-constrained installations requiring minimal fiber count.49.2 ft. fiber optic cable for longer distance application.This cable enables safer cable installations in areas with poor ventilation and is safe to use in any application. It features Ultra Physical Contact (UPC), Bend Insensitivity, Flame Retardant, and Bend Resistance.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single Mode OS2 Fiber Cable is for Use in 100 Gigabit Ethernet and fiber-channel applications.Cable Length ( ft.): 32.8 ft..This cable is Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

The Multi Mode OM1 cables are designed to support Gigabit Fibre & ethernet channel, the cables are capable of supporting 1Gigabit applications up to over 25m length. These Fibre Cables are constructed with the high quality components such as genuine Corning Inficore 3 glass and high grade connectors with ceramic ferrules to ensure the maximum performance accuracy and durability. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Perfect for short-distance fiber optic connections, this cable is ideal for linking LC and SC ports in data centers, enterprise networks, and telecom setups, ensuring dependable performance.Offers a practical 3.28 feet (1 meter) length for neat and space-saving installations.Equipped with LC male connectors on one end and SC male connectors on the other, delivering secure and precise fiber optic connectivity.Made with 62.5/125 µm OM1 multimode fiber, featuring a Low Smoke Zero Halogen (LSZH) jacket for added safety, and finished in orange for easy identification.Supports up to 1 Gbps data transfer speeds, making it suitable for standard networking applications.Fully compatible with OM1 fiber optic systems for reliable connectivity.2-year manufacturer warranty

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Enhance the performance capabilities of CWDM applications with this OS2 fiber cable.Cable length: 9.8'.SC/SC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in aramid-reinforced yellow jacket for a loaded bend radius of 10mm.Single Mode OS2 fiber cable is immune to EMI and optimized for 10/40/100G networks.Perfect for connecting between servers/switches and data center equipment.Meets or exceeds the ITU-T G652.D/G657.A1 and IEC60703-2-50 Type B1.3/B6.a1 standards.LSZH jacket emits low toxic fumes if combusted; safe for enclosed/poorly ventilated spaces.Attenuation value under 0.35dB/km outperforms industry standards.Backward compatible with OS1.High micro-bend resistance facilitates tight bends in complex installations.Coarse Wavelength Division Multiplexing (CWDM) enables extended 1260-1625nm wavelength support for greater channel isolation over long distances.Number-labeled connectors to indicate polarity.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 32.8ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant, Passive.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 32.8ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant, Passive.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable is for use in 100 Gigabit Ethernet and fiber-channel applications.Cable Length ( ft.): 164 ft..This cable is Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 65.6ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

Tripp Lite 1M Fiber optic duplex 62.5/125 patch cable has connector edges which are beveled and color coded for easy or secure connection throughout your network. Cable has LC connectors on each end, a PVC jacket and is FDDI and OFNR rated..Orange.Fiber optic LC Male/LC Male.Duplex multimode fiber is most commonly used in LAN applications where links are 10 feet or less.3'.Material: Polyvinyl Chloride (PVC) - jacket.Applications: Computer networking (fiber).System requirements: Any fiber optic hardware or NIC card requiring multimode duplex cable with LC connectors.Diameter: 125 micrometer clad, 62.5 micrometer core.Fiber type: 62.5/125 - OM1 all glass graded index.Network speed: 1Gbps.color-coded shrouds identify transmit and receive.Beveled edge on ends of glass makes insertion of plug a breeze.Fiber made from glass (not a polymer).Includes 1M duplex MMF cable LC/LC 62.5/125 micron fiber, fiber optic duplex patch cable(Riser).Compliant and standards: FDDI, OFNR, ROHS.Warranty: Lifetime limited

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.9.84 ft. for short distance application.This cable is Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant, Passive.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 6.56ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant, Passive.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime