Fiber SFP Modules

This N-Tron® NTSFP-FX compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with N-Tron®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100Mbps for connectivity.Optical Fiber media support for a dependable and productive connectivity.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

Cisco™ 1000BASE-BX10 Upstream SFP module is a hot-swappable input/output device that plugs into a gigabit ethernet port or slot. SFP is compatible with Cisco™ ME 2400, catalyst 2960 series, Cisco™ ME 3400 and catalyst 3560 series..10/100/1000Base-T Gigabit Ethernet.Form factor: Hot-swappable, spare product, 1310-nm TX/1490-nm RX wavelength, operating transmission range up to 10 km.Interfaces: 1 x LC 1000Base-BX.Connectivity media: G.652 micrometer single-mode optical fiber.Management: Digital optical monitoring (DOM) functions.Application/usage: Data networking.Compatibility: Cisco ME 2400, Catalyst 2960 series, Cisco ME 3400, Catalyst 3560 series, Catalyst 3750 series, Catalyst 4500 series, Catalyst 4900 series, Catalyst 6500 series.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Warranty: 90 days limited.Cisco™ 1000BASE-BX10 Upstream SFP module can be used for data networking and has 1 Gb/s data transfer rate.

This Brocade® (Formerly) E1MG-SX-OM compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Brocade® (Formerly). It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical Fiber media support ensures maximum convenience and great usability.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

This Avago HFBR-57E0APZ compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Avago. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100Mbps for connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

This Brocade® (Formerly) E1MG-LX-OM compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Brocade® (Formerly). It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Single-mode fiber mode support for reliable, fast transfer, sharing, and access to the data and information

This Finisar® FTLF1318P3BTL compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Finisar®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Single-mode fiber mode support for feasible connectivity with added productivity

This Hirschmann M-SFP-LX/LC-EEC compatible SFP transceiver provides 1000Base-LX throughput up to 20km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between -40 and 85C. It is guaranteed to be 100% compatible with the equivalent Hirschmann transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

This Huawei® SFP-1.25G-SX compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Huawei®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical Fiber media support ensures maximum convenience and great usability.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

This Avago® AFBR-5710PZ compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Avago®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Multi-mode fiber mode support for dependable connectivity with maximum usability

Cisco 100BASE-FX small form-factor pluggable (SFP) fast Ethernet interface converter is a hot-swappable device that plugs into a gigabit Ethernet SFP port on Cisco catalyst 3750 series, 3560 series, and 2970 series switches..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.4"(H) x 2.2"(W) x 1/2"(D).Compatibility: Cisco catalyst 3750, 3560, and 2970 series switches.Connectivity media: 62.5/125 um multi mode fiber, 50/125 um multi mode fiber.Transmit (dBm): 50/125-micron: -23.5 min, -14max, 62.5/125-micron: -20 min, -14max, receive (dBm): 50/125-micron: -33.35 min, -11.8 max, 62.5/125-micron: -33.35 min, -11.8 max.Distance supported: 6.5'.Operating temperature: 32 - 158 deg F, storage temperature: -40 - 185 deg F.Surge current: 350 typical, wavelength (nm): 1270 min, 1300 typical, 1380 max.Power consumption: 1.5 W per port.Input voltage: 3.3 V - 3.5 V device, 3.3 V typical device.Input current: 405 mA typical, 450 mA maximum.Data transfer rate: 100 Mbps fast Ethernet full duplex.MTBF: 12,820,512 hours.Form factor: Hot-swappable.System requirements: Cisco IOS software release 12.2(20)SE1.Application/usage: Data networking.Regulatory and standards compliance: IEC 60825-1.SFP fast ethernet interface converter 100FX SFP on GE SFP ports for DSBU switches.

Industry standard Cisco small form factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a gigabit Ethernet port or slot, linking the port with the network..Interfaces/ports: 1 x LC duplex 1000Base-LX/LH.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(D).Compatibility: Cisco IE 3000 series switches, cisco 3200 series rugged routers, cisco MWR 2900 mobile wireless routers.Connectivity technology: Wired.Connectivity media: Single mode fiber 1000Base-LX/LH.Operating temperature: -40 - 185 deg F.Fiber type: SMF/MMF.Cabling type: Ethernet 1000Base-LX.Additional information: Spare product, range: 10 Km, wavelength: 1300 nm.Data transfer rate: 1 Gb/s gigabit Ethernet.Form factor: Hot swappable/plug-in.Application/usage: Data networking.SFP (mini-GBIC) transceiver module 1000 MBPS SFP single mode rugged 1000BASE-LX/LH SFP for MMF and SMF.

Transition Networks® Cisco compatible SFP transceiver module features 1000Base-LX interfacing through SFP connector and are designed for bidirectional serial-optical data communication. Module used in gigabit ethernet operate at a speed of 1.25 Gbps..Interfaces/ports: 1 x 1000Base-LX, Interfaces/ports details: 1 x LC 1000Base-LX.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Compatible with: 1000BLX SM LC 10KM 3.3V.Application/usage: data networking.Warranty: lifetime.Transition Networks® Single mode SFP transceiver module are Cisco compatible allowing 1000Base-LX interface to the network and operates at 1310nm wavelength there by finding its application in gigabit ethernet, metro edge switching.

The 1000Base-LX Industrial SFP Single-Mode LC Module, model TI-MGBS10, is designed to operate within a wide temperature range and is well suited for industrial environments. This SFP module works with standard SFP slots found on industrial switches and fiber converters. The TI-MGBS10 is compatible with Duplex LC fiber connector types and supports gigabit single-mode fiber connections at distances of up to 10 kilometers (6.2 miles). DEVICE INTERFACE: SFP MSA Compliant; LC duplex connector NDAA + TAA COMPLIANT: With our NDAA and TAA compliant Modules, you can plan and install networking solutions that Government customers demand today (U.S. and Canada Only) LIFETIME PROTECTION -We stand by the quality of our products. The TI-MGBS10 1000Base-LX Industrial SFP Single-Mode LC Module (10km) is secured with Lifetime Manufacturer Protection from TRENDnet. (U.S. and Canada Only) FIBER APPLICATIONS: Long distance fiber networking for industrial, manufacturing, and corporate / education campus applications FIBER MODE / DISTANCE: Single-Mode transceiver spans distances up to 10km (6.2 miles) and supports up to 1.25Gbps COMPATIBILITY: Hot-pluggable with a MSA compliant SFP slot and compatible with fiber cables with LC-type duplex connectors OPERATING TEMPERATURE: Rated for an operating temperature range of -40°- 85 °C (-40° - 185 °F) Supports 1310nm single-mode network transmissions; Duplex LC optical interface, Low power consumption FIBER INTERFACE: LC-type duplex connector More from the Manufacturer.NDAA / TAA compliant (U.S. and Canada only).Compliant with IEEE 802.3z Gigabit Ethernet.Supports 1310nm single-mode network transmissions.Wide operating temperature range of -40°- 85 °C (-40° - 185 °F)

AddOn® SFP+ Module can be mixed with 3rd party transceivers for outstanding network performance. Module operates at 1310 nm over multi-mode fiber with a maximum reach of 220 m connected through a LC connector..Interface/ports: 1 x LC duplex 10GBase-LRM network.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Compatibility: Catalyst 2360, catalyst 3100 blade switches, Nexus 7000, catalyst 2960-S, catalyst 3560-E, catalyst 3560-X, catalyst 3750-E. catalyst 3750-X, catalyst 4500, catalyst 4900, ME 4900, catalyst 6500.Connectivity technology: Wired.Form factor: Hot-swappable.Connectivity media: Multi-mode optical fiber 10GBase-LRM.Max transfer distance: 720 ft.Data transfer rate: 10.30 Gbps gigabit Ethernet.1310nm.Environmental condition: Operating temperature: 0 - +70 deg C.Multi-rate compliance for ethernet and fiber channel.Sub watt power consumption: 0.65W (typ.).Multipurpose multi-rate optical transceiver module for transmission at 1310nm over multimode fiber.Its sub watt power consumption and its excellent EMI performance allow system design with high port density.Warranty: 3 years limited.AddOn® SFP+ Module is built to meet or exceed the OEM's specifications and features 10GBase-LRM interface.

This Avago® AFBR-5705PZ compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Avago®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Multi-mode fiber mode support for feasible connectivity with added productivity

The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver, and it supports up to 400m link length when uses 4700Mhz KM MMF (OM3). The 10GBase-SR SFP+ module offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver.Industry’s smallest 10G form factor for greatest density per chassis.Compatibility: Cisco nexus 5000 series Switches, cisco nexus 7000 series switches.Hot Pluggable.850nm VCSEL transmitter, PIN photo-detector.Maximum link length of 300m on 2000MHz/km MMF.Operating case temperature: 0 to 70 °C.Additional information: Spare product, distance 300 m.Form factor: Plug-in module.Application/usage: Data networking.90 days limited warranty.The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver. SFP+ transceiver module supports a link length of 26 m on standard fiber distributed data interface (FDDI)-grade multimode fiber (MMF).

The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver, and it supports up to 400m link length when uses 4700Mhz KM MMF (OM3). The 10GBase-SR SFP+ module offer customers a wide variety of 10 gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver.Industry’s smallest 10G form factor for greatest density per chassis.Compatibility: Cisco nexus 5000 series Switches, cisco nexus 7000 series switches.Hot Pluggable.850nm VCSEL transmitter, PIN photo-detector.Maximum link length of 300m on 2000MHz/km MMF.Operating case temperature: 0 to 70 °C.Additional information: Spare product, distance 300 m.Form factor: Plug-in module.Application/usage: Data networking.90 days limited warranty.The Cisco SFP-10G-SR module is the multimode 10G fiber optical transceiver. SFP+ transceiver module supports a link length of 26 m on standard fiber distributed data interface (FDDI)-grade multimode fiber (MMF).

This Moxa® SFP-1GLXLC-I compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Moxa®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

This Accedian® 7SN-100 compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Accedian®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

The Cisco SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor. This short reach module supports a link length of up to 300/400m over OM3/4 at 10G, and up to 300/400m over OM3/4 at 25G. It also supports link lengths of 82m over OM2 at 10G, and up to 70m over OM2 at 25G. This module requires RS-FEC on the host port for full reach operation at 25G. Using BASE-R FEC the module can support 70/100m over OM3/4 and with-out FEC it can support 30/50m over OM3/4 at 25G. For 10G operation FEC is not required..This module offers high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications.Wavelength: 850nm.Supports FCoE with the appropriate host s/w support.Features dual LC/PC connector

This Brocade® (Formerly) XBR-000180 compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Brocade® (Formerly). It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..10GBase-SR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Optical Fiber media support for efficient and reliable connectivity.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

This Hirschmann M-SFP-SX/LC compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Hirschmann. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

Cisco 32Gbps fiber channel SFP+ transceiver provides fiber channel connectivity for 8/16/32-Gbps ports on the MDS 9000 family platform. Cisco fiber channel shortwave SFP+ offers 8/16/32-Gbps autosensing fiber channel connectivity..32Gbps shortwave fiber channel SFP+ transceiver provides fiber channel connectivity for 8/16/32Gbps ports on the MDS 9000 family platform.Dimensions: 0.33"H x 2.22"W x 0.53"D.Comes in silver.Wavelength: 850nm.Fiber type: MMF

This Hirschmann M-SFP-LX/LC compatible SFP transceiver provides 1000Base-LX throughput up to 20km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Hirschmann. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Single-mode fiber mode support for feasible connectivity with added productivity

This Brocade® (Formerly) E1MG-LX-A compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Brocade® (Formerly). It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical Fiber media support for a dependable and productive connectivity.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

This Sonicwall® 01-SSC-9785 compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Sonicwall®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..10GBase-SR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Optimize the network's performance with 10 Gigabit Ethernet connectivity.Optical Fiber media support for efficient and reliable connectivity.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

This Netgear® AXM761 compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Netgear®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..10GBase-SR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

This Moxa® SFP-1GSXLC compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Moxa®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

This Hirschmann® M-SFP-MX/LC-EEC compatible SFP transceiver provides 1000Base-MX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between -40 and 85C. It is guaranteed to be 100% compatible with the equivalent Hirschmann® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Hirschmann®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-MX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

This Emerson® VE6050T07 compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Emerson®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

The Transition Networks® TN-GLC-SX-MM 1000Base-SX Gigabit Ethernet SFP transceiver module is suitable for Gigabit Ethernet switches and routers, fiber channel switch infrastructure, xDSL applications and metro edge switching. This hot pluggable transceiver module with LLC 1000Base-SX interface, transfers data at the rate of 1.25 Gbps up to 550 m distance over multi-mode fiber media at a wavelength of 850 nm. This transceiver module helps to install in any SFP port allowing for 1000Base-SX interface to the network through the SFP connector..Hot-pluggable SFP transceiver module is suitable for Gigabit Ethernet switches, routers, fiber channel switch infrastructure and xDSL applications.Dimensions: 0.33"H x 0.52"W x 2.18"D.Supports multi-mode fiber (MMF) connection media.Interfaces/ports: One LC 1000Base-SX.Ethernet technology: Gigabit Ethernet.Maximum data transfer rate: 1.25 Gbps.Reach: 550 m.Wavelength: 850 nm.Media type supported: Optical fiber.Link budget: 8.5 dB.Power: 3.3 V, Power consumption: 0.66 W.Temperature range: 0 - 70 deg C operating, 40 - 85 deg C storage.Fiber optic cable standard: 62.5/125 u m, 50/125 u m.SFP footprint LC optical transceiver.Has been designed to install in any SFP port while allowing for 1000Base-SX interface to the network through the SFP connector.Meets MSA, IEC-60825, FDA 21, CFR 1040.10 and 1040.11, IEEE 802.3 2003, ANSI X3.297-1977 certifications and standards.Comes with lifetime warranty

This Emerson® VE6050T03 compatible SFP transceiver provides 1000Base-LX throughput up to 20km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between -40 and 85C. It is guaranteed to be 100% compatible with the equivalent Emerson® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Emerson®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

This Ciena XCVR-B00G85 compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Ciena. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

This Allen-Bradley® 1783-SFP100FX compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Allen-Bradley®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Compatible with Allen-Bradley 1783-SFP100FX.100Base FX SFP.Ensures reliable performance for everyday use

This Emerson® VE6050T08 compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Emerson®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Fast Ethernet technology - An ideal solution for extending network connections to conference rooms, labs, lobbies and department workgroups.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

This Emerson® VE6050T06 compatible SFP transceiver provides 100Base-LX throughput up to 25km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between -40 and 85C. It is guaranteed to be 100% compatible with the equivalent Emerson® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Emerson®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-LX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Fast Ethernet technology - An ideal solution for extending network connections to conference rooms, labs, lobbies and department workgroups.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

This Fortinet® FG-TRAN-SFP+LR compatible SFP+ transceiver provides 10GBase-LR throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Fortinet®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Lets you conveniently connect to the 10 gigabit ethernet Ethernet technology to offer maximum productivity.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Single-mode fiber mode support for feasible connectivity with added productivity

This Accedian® 7SU-100 compatible SFP transceiver provides 1000Base-BX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1490nmTx/1310nmRx via an LC connector. This bidirectional unit must be used with another transceiver or network appliance of complementing wavelengths. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Accedian®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-BX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

This Hirschmann® SFP-FAST-MM/LC-EEC compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Hirschmann®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Fast Ethernet technology - An ideal solution for extending network connections to conference rooms, labs, lobbies and department workgroups.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

Cisco™ Downstream SFP module is a hot-swappable I/O device that plugs into a gigabit Ethernet slot and linking it with the fiber-optic network. Module supports data networking applications and offers data transfer rate of 1 Gb/s..1 x LC 1000Base-BX.0.3"(H) x 0.5"(W) x 2.2"(D).Cisco ME 2400, Catalyst 2960 series, Cisco ME 3400, Catalyst 3560 series, Catalyst 3750 series, Catalyst 4500 series, Catalyst 4900 series, Catalyst 6500 series.Wired.Connectivity media: G.652 microm single-mode optical fiber.Form factor: Hot-swappable.Management: Digital optical monitoring (DOM) functions, Application/usage: Data networking.Data transfer rate: 1 Gbps gigabit ethernet.Operating transmission range: Up to 10 km.Small form-factor pluggable (SFP) gigabit interface converter is a hot-swappable input/output device that plugs into a Gigabit Ethernet-port or slot, linking the-port with the network.1490-nm TX/1310-nm RX wavelength.Warranty: 90 days limited.Cisco™ Downstream SFP module has the ability to go up to 10 km over G.652 microm single-mode optical fiber and features digital optical monitoring functions.

The Allied Telesis™ AT-SPSX-90 SFP (mini-GBIC) module is perfect for data networking and optical network. This multi-mode module with SX network works based on 1000Base-SX Gigabit Ethernet technology. The hot-swappable module supports a maximum distance of 1804.46' and maximum data transfer rate of 1.25 Gbps. It has 1 x LC 1000Base-SX network interface for external connections. This module supports 62.5/125 mu m and 50/125 mu m optic fiber..Hot-pluggable SFP (miniGBIC) module is perfect for data networking.Connectors: 1 x LC.Ethernet technology: Gigabit Ethernet.Network technology: 1000Base-SX.Data transfer rate: 1 Gbps.Media type: 62.5/125 mu m, 50/125 mu m multi-mode optical fiber.Maximum reach: 220m/550m.Wavelength: 850 nm.Meets Eco, RoHS, WEEE, REACH standards

This Netgear® compatible SFP transceiver provides 1000Base-MX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Netgear® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-MX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical Fiber media support for efficient and reliable connectivity.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

Omnitron Pluggable optical transceiver operates at 850 nm wavelength and covers a maximum distance of up to 1800'. Transceiver is compatible with iConverter media converter modules, T1/E1 MUXes and network interface devices..Interfaces/ports: 1 x LC 1000Base-SX.Connectivity media: Multi-mode optical fiber.Ethernet technology: Gigabit Ethernet.Form factor: Plug-in module.Data rate: 1 Gbps.Cable distance: 550 meters.Wavelength: 850 nm.Application/usage: Data networking.Connectivity technology: Wired, Min. Tx Power (dBm): -9.5, Max. Tx Power (dBm): -4,Min. Rx Sense (dBm): -17, Max. Rx Power (dBm): -3, Link budget (dBm): 7.5.Low EMI metal enclosure, supports a wide variety of cable types.Digital diagnostic capability.Pluggable optical transceivers enable flexible fiber and copper connectivity.Warranty: Lifetime.Omnitron Pluggable optical transceiver transfers data at a rate of 1 Gb/s and enables a single network device to connect to a wide variety of fiber optic cable types.

The Cisco QSFP module supports link lengths of up to 10 kilometer over a standard pair of G.652 single-mode fiber with duplex LC connectors. The module supports 40GBASE Ethernet rate only. The 40 Gigabit Ethernet signal is carried over four wavelengths. Multiplexing and demultiplexing of the four wavelengths are managed in the device. Does not support FCoE..Transceiver module for MMF.Pull tab comes in blue.Guarantees a link BER of 1E-12 when supporting 10km on SMF.Maximum power consumption: 3.5W.Wavelength: 1310nm.Cable type: SMF.Core size: G.652 microns.Cable distance: 10km.5-year manufacturer limited warranty

This Cisco® GLC-ZX-SMD compatible SFP transceiver provides 1000Base-ZX throughput up to 80km over single-mode fiber (SMF) using a wavelength of 1550nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-ZX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

The Cisco Quad Small Form-Factor Pluggable (QSFP) portfolio offers customers high-density and low-power Ethernet connectivity for data center, high-performance computing networks, enterprise core and distribution layers, and service provider applications. The Cisco QSFP dual-rate bi-directional (BiDi) transceiver is a pluggable optical transceiver with a duplex LC connector interface for short-reach data communication and interconnect applications using Multi-Mode Fiber (MMF)..Uses multimode fiber (MMF) as the fiber cable type and features a duplex LC optical connector for connectivity..QSFP transceivers enable high-speed 40G/100G Ethernet over multimode fiber using BiDi tech for short-reach data center connectivity..Supports data transfer rates of up to 100,000 Mbps (100 Gbps) and 40,000 Mbps (40 Gbps)..Maximum distance of 100 meters over OM4 or OM5 multimode fiber for 100G Ethernet and 150 meters over OM4 for 40G Ethernet..Supports 40 Gigabit Ethernet (40GbE) and 100 Gigabit Ethernet (100GbE) over multimode fiber using a duplex LC connector..Has a typical power consumption of approximately 3.5 watts..Hot-swappable, allowing it to be inserted or removed from a compatible device without powering down the system..MSA (Multi-Source Agreement) compliant, ensuring interoperability with other QSFP28-compliant devices across various platforms..Operates at two wavelengths: 855 nm and 908 nm, using short-range bidirectional optics over multimode fiber.

Optimize your network with the Lantronix TNGLCLXSMRGD SFP Module. Featuring 1000Base-LX technology, this module provides up to 1 Gbps data transfer over optical fiber. Single-mode fiber support ensures minimal signal loss across long distances, making it ideal for high-speed, reliable connectivity in enterprise environments..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

This LG-Ericsson RDH10247/25 compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with LG-Ericsson. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance