Gigabit LAN Cards

The Plugable USB3-E1000 Gigabit Ethernet network adapter supports all USB 3.0 power saving modes and 10/100/1000 with auto-sensing. It features IPv4/IPv6 checksum offload engine, crossover detection and auto-correction, TCP large send offload and IEEE802.3az EEE that allows the device to enter a low power idle state to reduce power. Using proprietary burst transfer mechanism, this adapter offers high performance packet transfer rate over USB bus. It supports Microsoft Windows 8.1, 8, 7, Vista and XP OS..Network adapter is perfect for faster HD video streaming, gaming, web browsing, network storage and more.Suitable for use with computer/notebook.Comes in black color.Host interface: USB 3.0, Number of ports: One RJ-45.Network technology: 10/100/1000Base-T.Media type supported: Twisted pair.Form factor: Portable.High performance packet transfer rate over USB bus using proprietary burst transfer mechanism.Supports all USB 3.0 power saving modes (U0, U1, U2 and U3) and 10/100/1000 with auto-sensing (IEEE 802.3, 802.3u and 802.3ab).Features: IPv4/IPv6 checksum offload engine, crossover detection and auto-correction, TCP large send offload & IEEE 802.3az energy efficient Ethernet.Supports dynamic cable length detection and dynamic power adjustment Green Ethernet (Gigabit mode only).Contains standard USB type A connector to PC and female RJ45 jack to network, quick install guide, driver disk for Windows and Mac

The JCH471 USB Type-C Gigabit Ethernet & HUB Multi Adapter provides extra connectivity for your computer with 5 Gbps faster transfer speed. Our pocket-sized multi-adapters allows you to add additional USB computer accessories and Gigabit LAN through your USB Type-C port..Gigabit Ethernet and 3-Port HUB over a USB Type-C connection.Other (360015).Aluminum housing.Compatible with Windows/Mac/Linux/Chrome OS.USB 3.0 Type-C Multi-Adapter

Supports twisted pair cables for durability and improved signal transfer while ensuring smooth and seamless data transfer.Gigabit Ethernet port for ultra-fast network speeds.With 1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable

Tripp Lite's USB 3.1 Type-C to Gigabit Ethernet NIC Network Adapter allows USB-C computers, notebooks and smartphones without a network interface controller to connect to a network or the Internet using an Ethernet cable. It's a more convenient and less eXPensive way to connect to the network than opening your device and installing an internal Ethernet card. The white adapter is compact and lightweight for easy carrying in your notebook bag..Connects USB™-C port on computer, notebook or smartphone to a wired Ethernet network.Accesses true gigabit network speed without the eXPense & hassle of adding an internal Ethernet card to a device.Supports full 10/100/1,000Mbps network speeds.Twisted Pair.Meets RoHS, 802.3, 802.3u, USB 1.1, USB 2.0, 3.0, 3.1 certifications and standards.Network technology: 10/100/1000Base-T.Data transfer rate: 1 Gbps, Connectivity: Wired.Comes in white color, Dimensions: 6.6 cm H x 2.27 cm W x 1.52 cm D.Suitable to use with Computer/notebook/tablet.Plug-and-play engineering requires no drivers or external power supply necessary.Compact and lightweight design offers easy carrying in your laptop bag.Sustains full 10/100/1000 Mbps network speeds for fast data transfer, fumble-free reversible plug ensures fast, easy connection every time.Contains quick start guide.Weight: 0.03 kg.Comes with 1 year limited warranty

1-Port 2.5GbE M.2 2280 Network Card, Multi-Gigabit Speeds (2.5G/1G/100M/10M), NBASE-T (802.3bz) NIC, M.2 B+M Key, PCIe Ethernet Interface, For SFF/Desktop PCs.High-performance M.2 Ethernet 2.5Gbps network card with Intel I225-V-chip; Multi-gigabit; Leverage existing Cat5e/Cat6 cabling (or better); NBASE-T (802.3bz); PCI Express M2 2280 B or M key compatible.M.2 2280 form factor is ideal for upgrading systems that do not have PCIe expansion slots or where slots are already in use; Includes 2ft (60cm) M/F Cat6 cable adapter for running Ethernet port to full/low-profile bracket on the rear of the PC.2.5GBASE-T variable speed options (2.5/1Gbps and 100/10Mbps) with auto-negotiation; Supports B or M key M.2 PCIe Gen 2 slots; Network interface card for PC is compatible with Windows/VMware/Linux; Full and low profile bracket included.Intel vPro® for remote management and troubleshooting; PXE boot enabled for faster deployment/updates; 9K jumbo frame for reduced packet overhead; Remotely boot a system using WoL; VLAN support for efficient network management.Designed and built for IT Professionals, this 2.5 GbE M.2 NIC is backed for two years, including free lifetime 24/5 multi-lingual technical assistance.This Ethernet card supports the following advanced features: PXE Boot, Wake-on-Lan (WoL), VLAN tagging, 9K jumbo frame, half-duplex, auto-negotiation, and Error Correcting Memory (ECC) for optimal network functionality..This 2.5 GbE M.2 Network Interface Card (NIC) features an Intel I225-V chipset with Intel vPro® technology, for enhanced performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support of new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding 2.5GBASE-T (802.3bz) compatibility for seamless integration.

Using advanced HomePlug AV2 technology, this TP-LINK kit ensures a stable and high-speed wired connection, providing data transmission rates of up to 1000Mbps over the electrical wiring for ranges up to 984'. Stream in HD, game online, and download large files without interruption thanks to reliable powerline links. Allows users to connect a bandwidth-intensive device to the Internet with high speeds and ensure the smooth transmission of Ultra HD video streaming..This kit ensures stable and high-speed wired connection over the electrical wiring.Provides high-speed data transfer rates of up to 1000Mbps.Connect your favorite device or console with a gigabit Ethernet cord for more reliable performance at higher speeds.Compatible with Windows 2000/XP/2003/Vista/7/8/8.1/10, macOS, Linux.Gigabit port takes full advantage of your Internet and provides a secure wired network for your desktop, smart TV, or gaming console.Powerline security: 128-bit AES encryption.Each adapter dimensions: 2.6"H x 2"W x 1.1"D.Connect a powerline adapter to the router, plug another powerline adapter into a wall socket in another room, and you're done.Automatic power-saving mode reduces power consumption by 85% when the devices are not in use.Allows users to connect a bandwidth-intensive device to the Internet with high speeds and ensure the smooth transmission of Ultra HD video streaming.Box contains: two AV1000 Gigabit powerline adapters, two Ethernet cables, quick installation guide.Covers ranges up to 984'.Meets or exceeds the CE and RoHS standards

The JCE131 USB Type-C Gigabit Ethernet Adapter is a simple, one-piece external adapter that plugs into the USB Type-C port on your MacBook Air, Chromebook, and other laptop and desktop computers with a USB-C port, it is the ultimate solution if you do not have an Ethernet port or if you just want to increase your speed..Small USB Type-C reversible connector.Other (360015).USB 3.0 plug-and-play and backwards compatible with USB 2.0/1.1.Small, lightweight, portable size.Compatible with Windows and Mac OS.Activity and Link LED indicators.USB Type-C Gigabit Ethernet Adapter

Startech.com® PCI Express gigabit Ethernet multimode SC fiber network card includes low profile and half height installation brackets for secure attachment. Network card is compatible with Windows 7/8/8.1/ XP/Vista, Linux and Mac OS..Plug-in card.Dimensions: 4.6"(H) x 0.7"(W) x 4.7"(L).Interface/port: External ports: 1 x Fiber optic SC duplex female, Host interface: PCI-express x 1 Male.Software requirement: OS compatibility: Windows 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64), Windows Server 2012, 2008 R2, 2003, Mac OS 10.5 and up (tested up to 10.9), Linux 2.4.x/2.6.x/3.5.0, Microsoft Hyper-V.Card type: Standard profile (LP bracket incl.).Data transfer rate: 2000 Mbps (2 Gbps) full-duplex, Buffer size: 48 KB.Compatibility: PC, UART type: 16C550.Network technology: 1000Base-X.Compatible networks: 1000 Mbps, SC port type: Duplex.Operating temperature range: 0 - 45 deg C, Storage temperature: -20 - 70 deg C, Humidity: 5 - 95% RH (non-condensing).LED indicators: 1 - link (green), 1 - activity (yellow).Power consumption: 3.2W Max.Includes: 1 x port PCI-express gigabit fiber network card, 1 x Low profile bracket, 1 x Driver CD, 1 x Instruction manual.Certification and standards:: RoHS, CE, FCC, IEEE standards: 802.3z, 802.1Q, 802.1P, 802.3x.Weight: 2.3 lbs..Warranty: 2 years limited.Startech.com® PCI Express gigabit Ethernet multimode SC fiber network card supports a maximum data transfer rate of up to 2000 Mbps and is ideal for high speed video surveillance.

The APC AP9640 UPS network management card 3 is designed for a remote monitoring and control of an individual UPS by connecting it directly to the network. Compatible with Smart-UPS, this management card supports reporting UPS information to Building Management Systems or other third party management systems via BACnet/IP (Single Phase Smart-UPS only). Command line interface support offers simultaneous remote management access through Telnet and SSH. Micro-USB based console support allows for faster and easier troubleshooting and configuration. This card supports simultaneous web browser access for up to 8 users and network command line interface access for up to 3 users. The ability to reboot equipment remotely saves dispatching technicians to remote locations. Real-time event notification minimizes response times to critical physical infrastructure situations. Enables IT Administrators to reduce mean time to repair, improve efficiency, and maximize uptime..Network management card for a remote monitoring and control of an individual UPS by connecting it directly to the network.Supports faster communication at 1Gbps over network.Features one Ethernet port.Dimensions: 1.5"H x 4.76"W x 4.49"D.Meets or exceeds AS/NZS 3548 (C-Tick) class A, EN 55022 class A, EN 55024, FCC part 15 class A, GOST, ICES-003, VCCI class A, and RoHS standards.Securely connect via HTTPS/SSL, SSH (up to 2048-bit encryption), SNMPv3.Compatible with Smart-UPS.Offers simultaneous remote management access through Telnet and SSH.Supports reporting UPS information to building management systems or other third-party management systems via BACnet/IP (BTL certified) (Single-Phase Smart-UPS only).Capable of operating on a network using IPv6 protocol.Micro-USB based console support allows for faster and easier troubleshooting and configuration.Ability to reboot equipment remotely saves dispatching technicians to remote locations.Multitier user access supports up to four access levels: administrator, device user, read-only user, and network-only user; with username and password requirements.Supports Secure Boot with Root of Trust for enhanced security.Package contents: network management card, USB cable, and user manual.Operating temperature: 32 to 113 degrees Fahrenheit; operating humidity: 0 to 95%.2-year manufacturer limited warranty

2.5GbE USB C to Ethernet Adapter NBASE-T NIC - USB 3.0 Type C 2.5/1 Gigabit/100 Mbps Multi Speed Network/ USB 3.1 Laptop to RJ45/LAN Thunderbolt 3 Compatible/MacBook Pro Surface (US2GC30).COMPATIBILITY: Supports many OS and Hypervisors incl. Windows 7/8.1/10, Windows Server 2008 R2/2012 R2/2016, Linux LTS Kernel 4.19+, MacOS 10.11 to 11.HIGH PERFORMANCE: 2.5GbE USB C to Ethernet Adapter/ USB Type C/Thunderbolt 3 Network Adapter allows you to securely connect to high-speed Networks & is backwards compatible with existing Gigabit LANs.IDEAL FOR CONTENT CREATORS: USB 3.0 NIC provides bandwidth to power users on high performance laptops/workstations incl Mac Pro, MacBook Pro, Surface Book, HP ZBook, Dell Precision, Lenovo P Series.MAXIMUM BANDWIDTH: Leverage NBASE-T for 2.5 Gbps speeds over existing Cat 5e Cables w/o the expense of Cat 6A or Fiber; 3 speed Auto-Negotiation always provides max bandwidth.TECH SPECS: USB-C 3.1/3.0 or TB3 | 1x RJ45 | 2.5Gbps Multi-Gigabit | 3 speed 2.5G/1G/100 Mbps Auto-negotiation | Realtek RTL8156 | NBASE-T & 2.5GBASE-T | 9K Jumbo frame | WoL | VLAN | USB Bus Powered.USB LAN Adapter | IEEE 802.3bz | 2.5 Gbps | Mac | Windows® | Linux

Accelerate internet speeds and share files quickly with this USB-C to Gigabit Ethernet adapter. An ideal choice for areas with unreliable wireless networks, this adapter lets USB-C devices connect directly to wired networks for fast browsing, downloads, and file transfers. This Belkin USB-C to Gigabit Ethernet adapter has a reversible USB-C connector that plugs into compatible devices on the first try..Where wireless connectivity is inconsistent, overextended, or even non-existent, this USB-C to Gigabit Ethernet network adapter allows you to connect seamlessly and with confidence.With the 1Gbps speed, even the largest downloads can be possible without fear of interruption.USB-C Male and RJ-45 Female ports.Dimensions: 5.91"L.Connect the adapter to a USB-C port of a computer, then connect an Ethernet cable to the adapter — no additional drivers are needed.This 10/100/1000BASE-T compatible network adapter easily gets your new USB-C enabled device hardwired to your router or gateway when Wi-Fi connection is not available.2-year manufacturer limited warranty.Comes with 2 years limited warranty.Give devices access to powerful wired networks with this Belkin USB-C to Gigabit Ethernet adapter.

Using the 10/100/1000 base -T network technology, the StarTech USB 3.0 to Dual Port Adapter is able to operate with different speeds as it supports a twisted pair media. This adapter uses USB ports for easy installation of the device and works as an easy plug-and-play solution. The copper wiring ensures greater conductivity. Working at a data transfer rate of 5 Gbps, this Ethernet adapter enhances efficiency and helps to establish a strong connection without signal failures. It provides connectivity to devices even at a distance with a maximum distance of 330 feet..1 x 9-pin Type A female USB 3.0 A and 1 x 9-pin Type A male USB 3.0 A for better connectivity.Desktop form factor offers universal use.USB 3.0 interface compatible with most modern computers.Uses the 10/100/1000 Mbps network technology to match different speeds.Works under most environments at an operating temperature of 0 degree C to 50 degree C.Comes in a plastic enclosure for added durability.Has 3 terminals for enhanced connectivity.Compliant Standards: FCC, CE, IEEE 802.3i/3u/3ab/3x/1Q, RoHS.Dimensions: 0.6"H x 2.4"W x 0.6"D.Weighs light and portable at 2.1 oz..Comes with a 2-year limited warranty.The StarTech 8" USB 3.0 to Dual Port Gigabit Ethernet Adapter comes with a dual port that can simultaneously connect two different networks through a single USB 3.0 port.

The Cisco™ GLC-TE= Gigabit Ethernet SFP transceiver module is suitable for 7700 F3-series, 9372PX and 9396PX Cisco Nexus series switches. This SFP transceiver module has RJ-45 1000Base-T network LAN ports for connectivity. It supports twisted pair media for reliable data transfer..SFP transceiver module for 7700 F3-series, 9372PX and 9396PX Cisco Nexus series switches.Color: Silver.Connectors: One RJ-45 1000Base-T network LAN.Media type supported: Twisted pair.Ethernet technology: Gigabit Ethernet

Tripp Lite's U460-003-3A1G Portable USB 3.1 to Ethernet Adapter's built-in USB-C cable connects to your tablet, laptop or computer to give you 3 external USB-A ports. Just plug and play with no drivers or external power supply needed. It's ideal for a wide range of USB devices, such as flash drives, external hard drives, DVD players, MP3 players and digital cameras. Plus, the U460-003-3A1G's RJ45 port connects your computer to a wired network or the Internet using a UTP cable, such as Tripp Lite's N201-Series Cat-6 cables, without requiring the installation of an internal Ethernet card..Connects to USB™-C port on tablet, notebook or computer to provide 3 external USB-A ports and access to a 10/100/1,000Mbps Ethernet network.USB-A ports support data transfer rates up to 5Gbps.Plug and play--no drivers or external power supply needed.Fits easily into backpack, briefcase or notebook bag.Backward compatible with previous USB generations.1-year warranty.Color: Silver.Number of ports: 4.Connects to your tablet, laptop or computer’s USB-C port to offer 3 USB-A ports.Backward compatible with previous USB generations.Supports USB Battery Charging (BC) specification v1.2, so ports provide up to 1.5 A for fast charging of mobile devices.Supports IPv4 and IPv6 pack COE (Checksum Offload Engine) to reduce CPU loading.Supports full- and half-duplex operations.Supports Wake-on-LAN, jumbo frames and VLAN tagging, built-in cable is perfect for travel.Bus-powered through USB-C connection.Contains owner's manual.Comes with 1 year limited warranty

Control connected electronics from anywhere using your tablet or smartphone with the TP-LINK KP125 smart plug mini. Turn devices on and off, create schedules, and set timers using the Kasa Smart app. Use Away Mode to make it look like you're home when you're not. Pair with Amazon Alexa, Apple HomeKit, or Google Assistant to enable voice control. Enjoy peace of mind by checking on your devices remotely and always coming home to a well-lit house. Manage and control your connected devices with the Kasa Smart app..Smart Wi-Fi plug helps control connected electronics from anywhere using your tablet or smartphone.Pair with Amazon Alexa, Apple HomeKit, or Google Assistant to control with your voice.Dimensions (with plug): 1.5"H x 2.62"W x 2.39"D.Turn electronics on/off from anywhere with mobile devices using the Kasa Smart app.Create on/off schedules, timers, and countdowns, or set to work around dawn and dusk.Check to see if connected devices are on/off from anywhere for peace of mind.Switch lights on/off at different times with Away Mode to make it seem like you are home.Connects to your home's Wi-Fi network, no hub or accessories required.Kasa Smart app will guide you through the setup process and connect to your home Wi-Fi.Use Smart Action via the Kasa Smart app, to seamlessly control all connected Kasa devices.Meets or exceeds FCC and UL standards.Humidity: < 80 percent ... RH.Operating Temperature: 0 to 40 deg C.Powered directly from the USB ports.Network technology: 10/100/1000Base-T.Form factor: External.Green compliance: RoHs.Dimensions: 0.6"(H) x 1"(W) x 2.6"(D); Weight: 1 oz.Warranty: 2 years limited.Startech.Com® USB31000S Gigabit Ethernet NIC Network Adapter Card adds a single RJ45 ethernet port to a USB-enabled computer system.

The StarTech.com® ST3300G3UA 3-port USB 3.0 hub with 1-GbE port in a rugged aluminum housing, helps to expand your connectivity for your USB enabled computer. This travel friendly USB hub with a portable, lightweight design and built-in cable offers flexible desk placement options and supports wake-on-LAN, energy efficient Ethernet, jumbo frames, full duplex flow control, VLAN tagging and layer 2 priority encoding. The compact design of this USB hub makes it portable and it offers fast, easy installation without any drivers. This hot swappable USB hub offers plug-and-play convenience..Portable USB 3.0 hub plus gigabit Ethernet allows to add three USB 3.0 ports (5Gbps) and a GbE port to your MacBook.5 Gbps (USB 3.0)/2 Gbps (Ethernet, full-duplex) maximum data transfer rate.Interfaces/ports: 3 x USB 3.0, Network (RJ-45).Dimensions: 0.7"H x 1.3"W x 4.3"L.Power source: USB powered.WEEE, RoHS, Green Compliant.Bus type: USB 3.0, Chipset ID: Genesys Logic - GL3520 (USB 3.0), Realtek - RTL8153 (LAN).Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3az energy-efficient Ethernet, IEEE 802.3x Flow Control, 802.1q VLAN Tagging.Compatible networks: 10/100/1000 Mbps, flow control: Full duplex flow control, Jumbo frame support: 9K max.OS compatibility: Windows® 10 (32-bit or 64-bit), 8 / 8.1 (32-bit or 64-bit), 7 (32-bit or 64-bit), Windows Server® 2012, 2008 R2, Mac OS® 10.7.System and cable requirements: Host computer with a USB 3.0 port.LED indicators: 1 x power, 1 x link/activity (network).Operating temperature: 0 - 40 deg C, humidity: 10 - 90 % RH (Non-condensing).Cable length: 10.6", color: Silver/white, enclosure type: Aluminum/plastic, form factor: Compact.Weight: 2.6 oz..Comes with 2 year warranty

The Omnitron 01-01-7207 SFP optical transceiver enables a single network device to connect to a wide variety of flexible fiber and copper cable through its interchangeable, compact media connectors. It is compatible with iConverter®, FlexPoint™, OmniConverter™ and miConverter™ products to meet specific network protocols and media requirements. This transceiver supports digital diagnostic by providing enhanced diagnostic information. The compact design and the ease of interchangeability of this unit provide a flexible solution for network designs..Optical transceiver module is compatible with iConverter media converter modules, T1/E1 multiplexers and network interface devices.LC duplex 1000Base-LX network.Media type supported: Optical fiber, fiber mode supported: Single-mode, fiber optic cable standard: 9/125 ohm m.Form factor: Hot-pluggable, hot-swappable, data transfer rate: 1.25 Gbps.Compatible with FlexPoint, OmniConverter and miConverter media converter modules that support SFP transceivers.Compliant with IEEE 802.3u fast Ethernet and 802.3z gigabit Ethernet specifications.Supports operational data rates for SONET OC-3/12/48, SDH STM-1/4/16 and fiber channel x1/x2.Supports a wide variety of cable types, supports digital diagnostic capability, low EMI metal enclosure.Temperature: 0 to 50 deg C commercial, -40 to 80 deg C storage.Meets RoHS, Green, WEEE standards.Comes with 1 year warranty.Certifications and standards: Compliant with MSA SFF-8472 standard.OMNITRON SYSTEMS iConverter 1000Base-LX SFP Optical transceiver supports data transfer rate of 1 Gb/s and is suitable to use with networking applications.

Supports twisted pair cables for durability and improved signal transfer while ensuring smooth and seamless data transfer.Gigabit Ethernet port for ultra-fast network speeds.With 10/100/1000Base-TX technology, get up to 1000Mbps data transfer rate over twisted pair cable

StarTech.com® Server network adapter card features two RJ-45 female Ethernet ports and offers full duplex support. Card offers a data transfer rate of 2000 Mbps for full-duplex transmission and 1000 Mbps for half-duplex transmission..Dimensions: 4.7"(H) x 0.7"(W) x 3.6"(L).Chipset ID: Realtek - RTL8111E, Asmedia - ASM1182E.Host interface: PCI-Express x1, Network technology: 10/100/1000Base-T- Gigabit Ethernet, Maximum data transfer rate: 2000 Mbps (full-duplex), 1000 Mbps (half-duplex).Interface/ports: 2 x RJ-45 network, Connector type: 1x PCI-Express x1 male.Form factor: Plug-in card.Device supported: Server.Performance: Auto MDIX, full-duplex support, Jumbo frame support: 9K max.Supported protocols: IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding and IEEE 802.3x full-duplex flow control.Card type: Standard Profile (LP bracket included), Port style: Integrated on card, Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, PCI express base specification 2.0.Optional low-profile/half-height bracket that can be used for installation into a standard or small form-factor computer chassis.Indicators: LED: 2 - Green - Link/Activity, 2 - Yellow - Gigabit Mode.Software: OS Compatibility: Windows® 8.1 / 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000 Windows® Server 2012, 2008 R2, 2003(32/64), Mac OS 10.4 and up, Linux 2.4.x and up.System and cable requirements: Available PCI-Express slot.Environmental: Temperature: Operating: 0 deg C to 70 deg C (32 deg F to 158 deg F), Storage: 0 deg C to 100 deg C (32 deg F to 212 deg F), Humidity: 10 approx. 90% RH.Includes 1 x PCIe network card, 1 x low-profile bracket, 1 x driver CD, 1 x instruction manual.Weight: 1.8 oz..Warranty: 2 years limited.StarTech.com® Server network adapter card contains two Ethernet ports and has a PCI express slot that allows you to connect it to client, server or a workstation.

This USB-C Ethernet adapter connects you to a Gigabit network through the USB-C™ or Thunderbolt™ 3 port on your laptop or desktop computer and adds connectivity for an additional USB (Type-A) peripheral device. It's a great companion for your MacBook, Chromebook or Windows® laptop with an available USB-C port..USB-C to Network Adapter, USB 3.1 Type C & 1 Gbps.1000 / 100 / 10 Mbps Auto-Negotiation.EXTRA USB 3.0/3.1 PORT: USB-C to Ethernet and USB Adapter adds a RJ45 Ethernet Port for wired LAN access and an additional open USB Type-A Port for connecting another peripheral device.1x RJ45.Supported operating systems include Windows XP/Vista/7/8/8.1/10/11, for Windows Server 2003/2008 R2/2012, for macOS 10.11 to 10.14/11.0/12.0/13.0/14.0.2 Year Limited Warranty

Dell™ Sonicwall® 1000Base-SX SFP Short haul transceiver module eliminates potential points of failure associated with separate multiple vendor solutions. Module has SFP mini-GBIC compatible slots and supports wired connectivity technology..Interfaces/ports: 1 x Ethernet 1000Base-SX network.Media & performance: Connectivity media: Optical Fiber 1000Base-SX, Data Transfer rate: 1 Gb/s.Ethernet technology: Gigabit Ethernet.For SuperMassive E10000 Series, SuperMassive 9000 Series.Application/usage: Data Networking, optical network.Form factor: SFP.Warranty: 1 year limited.Dell™ Sonicwall® 1000Base-SX SFP Mini-GBIC short haul transceiver module is used in data networking as well as optical network and has a data transfer rate of 1 Gb/s.

Stay productive while enjoying high-speed and reliable internet connectivity with the 5 Gigabit Ethernet to USB-C 3.2 Gen 2 Adapter from Plugable. Designed for Windows 10/11 and macOS 10.7 or later devices with ChromeOS compatibility, this adapter plugs into an available 10 Gb/s USB-C 3.2 Gen 2 port and lets you connect to 5 Gb/s compatible wired network devices..Wired Ethernet adapter for high-speed network connectivity.USB-C interface with Gigabit Ethernet support.Supports up to 5000 Mbps over USB 3.2 Gen 2.1 Ethernet port for single device connection, Works with Windows 10/11, macOS 10.7+, Linux, and ChromeOS 100+.Compliant with IEEE 802.3, 802.3u, 802.3ab standards.2-year limited warranty.ChromeOS Compatible

Using advanced HomePlug AV2 technology, the TP-LINK AV1000 kit ensures a stable and high-speed wired connection, providing data transmissions of up to 1000Mbps over the electrical wiring for ranges up to 300m. Stream in HD, game online, and download large files without interruption thanks to reliable powerline links. With a Gigabit Ethernet port, the TP-LINK AV1000 kit allows users to connect a bandwidth-intensive device to the Internet with high speeds and ensure smooth Ultra HD video streaming. This makes the AV1000 kit the perfect home entertainment companion..High-speed powerline adapter ensures a stable and high-speed wired connection.Provides data transmission rates of up to 1000Mbps over the electrical wiring for ranges up to 300m.Gigabit port takes full advantage of your Internet and provides a secure wired network for your desktop, smart TV, or gaming console.Operating system compatibility: Windows 2000/XP/2003/Vista/7/8/8.1/10, macOS, Linux.Meets or exceeds the CE and RoHS standards.Connect your favorite device or console with a gigabit Ethernet cord for more reliable performance at higher speeds.Automatic power-saving mode reduces power consumption by 85% when the device is not in use.Sleek and modern powerline unit is small enough to fit in the palm of your hand and uses high-quality components.Set up your powerline in minutes, so you have more time enjoying a fast and reliable wired connection.Connect your powerline kit to any router, access point, or Ethernet switch to extend your network.Power consumption: maximum: 2.7W (220V/50Hz); typical: 2.3W (220V/50Hz); standby: 0.5W (220V/50Hz).Package contents: two AV1000 Gigabit Powerline TL-PA7017 adapters, two Ethernet cables, and one quick installation guide.2-year manufacturer limited warranty

This Cisco-compatible SFP+ transceiver provides 100/1000/10000Base throughput up to 98' over Copper. It is guaranteed to be 100% compatible with the equivalent Cisco transceiver. This easy-to-install, hot-swappable transceiver has been programmed, uniquely serialized, and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant..Copper SFP+ transceiver module is a hot-swappable SFP transceiver guaranteed to be 100% compatible with the equivalent Cisco transceiver.Hot-swappable transceiver has been programmed, uniquely serialized, and data-traffic and application tested to ensure that it will initialize and perform identically.Provides 100/1000/10000BASE throughput up to 30m over copper.Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters.This transceiver is Trade Agreements Act (TAA) compliant

Omnitron Systems FlexPoint GX/T 2-Port fiber media converter has RJ45 ST multimode connector to connect variety of devices. Converter has coarse wave division multiplexing technology to enhance the bandwidth of fiber..Interfaces/ports: 1 x Network (RJ-45), 1 x ST duplex port.Media type supported: Twisted pair, optical fiber, Fiber mode supported: Multi-mode, Fiber optic wavelength: 850 nm, Maximum distance supported: 1804.46'.Communication: Ethernet, Fast Ethernet, Gigabit Ethernet technology, Network technology: 10/100/1000Base-T, 1000Base-SX.Input voltage: 120 VAC.Cable types: Copper: EIA/TIA 568A/B, Cat 5 UTP and higher, Fiber: Multimode: 50/125micrometer, 62.5/125micrometer, single-mode: 9/125micrometer, Frame size: Up to 10240 bytes.Frame size: Up to 10240 bytes.Form factor: Rack-mountable, desktop, external, wall mountable.Dimensions: 1"H x 3"W x 4"D.Temperature: 0 - 50 deg C (commercial), -40 - 60 deg C (wide), -40 - 80 deg C (storage), Humidity: 5 - 95% (non-condensing), Altitude: -100 - 4000 m.Fiber port supports multimode and single-mode fiber with ST and SC connectors and single-fiber with SC connectors, User-selectable link modes for quick fault detection.Provides remote fault Indicators to signal loss of link for far-end fault and link fault conditions, Loopback mode supports end-to-end testing.Diagnostic and DIP-switch configurations are displayed with status LEDs for quick and easy installation.Includes FlexPoint GX/T ST multimode 550m US AC powered, US power supply - 120 V/60 Hz, user manual.Certifications and standards: EIA/TIA 568A/B, Compliance: UL, CE, FCC Class A, IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3z 1000BASE-X, IEEE 802.3ab 1000BASE-T, RoHS, WEEE.Weight: 6 oz..Warranty: Lifetime limited.Omnitron Systems FlexPoint GX/T 2-Port fiber media converter has gigabit ethernet technology to offer superior ethernet frame transfer.

The Dell™ 407-BBOS 220 m RJ-45 1000Base-T Gigabit Ethernet SFP transceiver module is compatible with Dell networking N3024, N3024F and N3024P switches. Plug-in transceiver module with Gigabit Ethernet technology, transmits data at the rate of 1.25 Gbps..Transceiver module for data networking.Form type: SFP (mini-GBIC).Interfaces/ports: One RJ-45 1000Base-T Ethernet network.Reach: 220 m.Ethernet technology: Gigabit Ethernet.Compatibility: Dell networking N3024, N3024F, N3024P.Form Factor: Plug-in module.Data transfer rate: 1.25 Gbps.Operating temperature rating: 85 deg C

The Adesso AUH-5000 is a compact and versatile USB-C to Gigabit Ethernet adapter designed to provide high-speed wired network connectivity for devices without native Ethernet ports. Supporting up to 1 Gbps data transfer rates, it ensures a reliable and fast internet connection suitable for tasks like video conferencing, streaming, online gaming, and large file transfers. This adapter is plug-and-play compatible with major operating systems, including Windows, macOS, Linux, and Chrome OS, requiring no additional drivers for most systems. Its TAA compliance makes it suitable for government and institutional use. The small form factor and lightweight design, coupled with a short built-in USB-C cable, make it a convenient accessory for mobile professionals who need consistent and stable network access on the go..The Network Adapter Type is a USB-C to Gigabit Ethernet Network Adapter..The Network Adapter Interface uses a USB 3.1 Type-C (USB-C) port and supports Gigabit Ethernet speeds up to 1 Gbps..The adapter has 1 RJ45 Ethernet port for network connection..The adapter is compatible with Windows 8, 10, 11, macOS 10.9 and later, Chrome OS, and Linux operating systems..The AUH-5000 is TAA compliant, meeting Trade Agreements Act standards suitable for government use..The product comes with a manufacturer warranty

The Kensington CA1100E USB-C to Gigabit Ethernet Adapter harnesses the speed and reliability of an Ethernet connection for the latest USB-C and Thunderbolt 3 devices. Simply plug in the adapter to your laptop’s USB-C or Thunderbolt 3 port, and the adapter will provide a stable wired connection to the Internet or intranet.The Kensington CA1100E USB-C to Gigabit Ethernet Adapter is perfect for laptops without ethernet ports, and gives you the ability to securely transfer and download files with confidence..Wired Network Connection provides a direct and secure connection to the Internet or LAN via a USB-C (male) connector for your device’s USB-C or Thunderbolt 3 port, and an RJ-45 (female) port for Ethernet.Gigabit Transfer Speeds supports 10/100/1000 BASE-T performance.Plug and Play Design uses native driver support to allow quick connections with Windows, Mac and Chrome operating systems, and USB-powered to eliminate the need for an external power source.USB-C and Thunderbolt 3 Compatible to accommodate the latest laptops and evolving computing environments.Gigabit Speed and Reliability for USB-C and Thunderbolt 3

With Gen10 Plus ProLiant Servers, HPE offers the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers. With Gen11 ProLiant Servers, HPE continues to offer industry-leading security and builds on Gen10 Plus features by adding support for SPDM security on select ethernet adapters..Ethernet adapter for Gen10 Plus ProLiant Servers.Provides data transfer rates up to 10Gbps.Contains two SFP+ ports.Features stand up profile with PCIe 3.0 x8.Power requirement: typical: 7.9 W; max: 9.1 W

The StarTech® US1GC30 black 5 Gbps USB-C to Gigabit network adapter offers a reliable network connection without even having to install drivers. Its compact, lightweight design fits nicely into any carrying case that lets you carry wherever you go. Supports full Gigabit bandwidth by harnessing the performance of USB 3.1 Gen 1 and lets you access very large files over the network at Gigabit speeds. Plug-and-play installation helps for a hassle-free setup and native driver support ensures quick setup..Delivers an optimal network connection with USB-C and Thunderbolt 3.Access large network files at Gigabit speeds with USB 3.1 Gen 1 (5Gbps).Easy setup with native driver support in Chrome OS™, macOS and Windows®.Use on the go or on a desktop with its compact and lightweight design.Perfect for travelling with direct power from your computer’s USB port.The StarTech® black 5 Gbps USB-C to Gigabit network adapter is compatible for use with desktop computer or Notebook.

Intel® Ethernet server adapter consists of data link protocols such as 10MB LAN, 100MB LAN and gigabit LAN. Adapter supports twisted pair media type and has audio video bridging with power management technologies..Network adapter interface: PCI express x1.Adapter represents the next step in the Gigabit Ethernet networking evolution for the enterprise and data center, offering audio video bridging.Dimensions: 2.6"(H) x 0.7"(W).Ports: Single port, Card height: Low-profile, full-height, Connector and cable: RJ-45 copper, Cable type: Category-3, category-5, category-5e up to 100 m.Media and performance: Category 5e twisted pair.Network and communication: 10/100/1000base-T.Device supported: PC, Mac.Form factor: Plug-in card.Ethernet controller: Intel Ethernet controller I210.Package includes: Ethernet server adapter I210, low-profile bracket.Standards and certificates: FCC B, UL CE, VCCI, BSMI, CTick, KCC, IEEE standards: 802.1Qav, 802.1Qat, 802.1AS, 802.3, 802.3u, 802.3x, 802.3z, 802.3ab, 802.3az.Warranty: Lifetime.Intel® Ethernet server adapter is a plug in card which has 10/100/1000Base-T network technology and efficiently manages packets with minimum latency.

The 2.5Gbps USB-C Ethernet Adapter for laptop and other devices with 100W Power Delivery (USBC-E2500PD) gives you access to ultra-fast ethernet connection speeds and powerful pass-through charging through a single Thunderbolt, USB4, or a PD-capable USB-C port.Offering a 2.5Gbps Ethernet connection, it ensures your online activities are faster and more reliable than ever, perfect for streaming, gaming, and working. The innovative design of this Ethernet USB C adapter integrates 100W Power Delivery pass-through, allowing you to charge your laptop at full speed with your existing charging cable, all while maintaining a stable internet connection. It should be noted that a charger or charging cord isn’t included or required as this adapter can provide Ethernet connectivity with just the power from the USB port it’s connected to (“bus powered”).This compact, travel-friendly plug-and-play USB C network adapter Ethernet requires no additional driver installation, so it’s a hassle-free addition to your tech toolkit. For work, play, or anything in between, this adapter simplifies your connectivity and charging needs in one sleek, efficient package..USB-C to Ethernet Adapter - Get secure, high-speed 2.5Gbps Ethernet and 100W Power Delivery for charging through a single USB Type-C port. Plug-and-play, and travel-ready.Ultra-Fast Internet Speeds - The Ethernet to USB C adapter converts your existing Thunderbolt, USB4, or USB-C port into a 2.5Gbps Ethernet port for lightning-fast downloads, seamless streaming, fast gaming, that’s more secure than Wi-Fi.100W Charging - Type-C USB to Ethernet adapter supports up to 100W pass-through charging so you can charge and connect through one USB-C port, just plug the USB-C charging cord that you already have into the adapter. A charger isn’t included or needed to use this USBC to Ethernet adapter.Compatibility - USB-C Ethernet adapter works with Thunderbolt, USB4, and USB-C enabled computers running Windows 10 or later, macOS 11+, and ChromeOS, or mobile devices like iPhone 15 / Pro / Pro Max.Support and 2-Year Warranty - Every Plugable product, including this USB C Ethernet Adapter, is covered by a 2-year limited parts and labor warranty. And, if you ever have questions, contact our Seattle-based support team – even before purchase

Enable your USB Type-C Chromebook to connect to blazing fast 2.5Gbps Ethernet to ensure a secure and reliable network connection for virtual learning, video conferences, and video streaming. The Targus HyperDrive Ethernet adapter has been tested and certified Works with Chromebook, which means it meets Google's compatibility standards and works seamlessly with your Chromebook..External adapter that adds a Gigabit Ethernet port over USB Type-C.Provides Ethernet speeds up to 2.5Gbps.Has one USB Type-C male port and RJ45 female port.Universal compatibility with most USB Type-C devices.Ultraportable construction allows you to take the adapter anywhere with ease.Premium aluminum enclosure for improved heat dissipation.USB bus-powered.2-year manufacturer limited warranty

This media converter by Tripp Lite converts a single-mode or multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SFP with fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks, and access control devices..Customizable media converter extends power and data to a PoE+ device via fiber cable.Dimensions: 0.98"H x 3.74"W x 2.76"D.Network compatibility: 10/100/1000 Mbps Gigabit Ethernet network.Features a compact black metal housing.PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device.Supports auto-sensing of network speed and other advanced functions, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDI-X configuration.Supports both full- and half-duplex operation.Customizable SFP port supports both 1G single- and multimode transceivers.RJ45 jack supports auto MDI/MDI-X to bridge various network devices.Six LEDs indicate the converter's power, PoE, Ethernet network, and fiber link statuses at a glance.Completely plug-and-play with no additional software required for connection.The included power supply connects to a convenient AC outlet with no computer or other signal source needed.Works in tandem with Tripp Lite N785-Series non-PoE converters (sold separately).Pack includes: media converter, external power supply with 3.6' cord and NEMA 5-15P plug (input: 100-240V, 50/60 Hz, 1.5A; output: 48V 1.25A), and owner's manual.Meets or exceeds FCC and RoHS standards.2-year manufacturer limited warranty

Give your laptop, computer, and other USB web devices access to wired network connections by plugging this TP-LINK USB Ethernet adapter into a modem, router, or network switch. It's built for most devices to enjoy powerful instant wired network connections, perfect for those without a built-in RJ45 Ethernet port. Simply by plugging in the USB 3.0 interface, the TP-LINK UE306 helps connect your Nintendo Switch to a wired network system, a much faster and more stable network environment than a Wi-Fi connection. Enjoy superfast and high-quality downloading on your Nintendo Switch..Give your laptop, computer, and other USB web devices access to wired network connections by connecting to a modem, router, or network switch with this adapter.Supports network speeds up to 1000Mbps for faster large file transfers and downloads, seamless streaming, immersive gaming, and more.Equipped with a USB 3.0 port and Gigabit Ethernet port.Compatible with Nintendo Switch, Windows 10/8.1, and Linux.Just plug in and be ready to use in seconds, no manual driver installation required.Intuitive LED indicator lets you know the network status at a glance.Enjoy gaming with your friends and fast downloads by plugging into your Nintendo switch dock and adding a gigabit Ethernet connection.Foldable and portable design perfectly suits your Ultrabook

j5create JCE133G is a simple, one-piece external adapter that plugs into the USB-C port on your Ultrabook or MacBook. It is the ultimate solution if you do not have an Ethernet port or if you want to increase your speed. Elegantly designed j5create JCE133G uses an RJ-45 connector that supports 10/100/1000Mbps Ethernet performance..External adapter that adds a Gigabit Ethernet port over USB Type-C.Provides Gigabit Ethernet connection.Features USB Type-C 3.1 Gen 1 male port and RJ-45 female port.Main body dimensions: 0.57"H x 0.91"W x 2.68"D; cable length is 3.94".USB bus-powered.Supports Wake-on-Lan (WOL) function.Supports IEEE 802.3az-2010, also known as Energy Efficient Ethernet (EEE).Reduce CPU loading, Microsoft NDIS5, NDIS6 Checksum Offload Engine (IPv4, IPv6, TCP, UDP), and Segmentation Task Offload (Large Send v1 and Large Send v2) support.Activity and link LED indicators.Compact, nontoxic, and recyclable aluminum housing.Protection components prevent Surge Overload, protecting the network card and extending the product's life.Native driver support, no additional driver needed in Windows 10, macOS 10.6 and later, Chrome OS

The TRENDnet USB Type-C Gigabit Ethernet adapter allows you to easily connect to a gigabit network from a USB Type-C enabled desktop, MacBook, or notebook PC. Compliant with a USB Type-C port and backwards compatible with USB 3.0, 2.0, and 1.1 speeds, this adapter lets you share files, connect to printers, and gain access to broadband Internet..External adapter that adds a Gigabit Ethernet port over USB Type-C.Supports up to 2000Mbps full-duplex transfer speed.One Gigabit Ethernet female port, one USB Type-C Male port.Compatible with USB Type-C enabled desktops, MacBook, or notebook PC; compatible with Windows/macOS operating systems.Meets or exceeds the CE and FCC standards.Dimensions: 0.55"H x 1"W x 2.8"D; cable length: 5".USB bus powered.2-Year manufacturer limited warranty.⚠ WARNING: California Proposition 65 Warning. This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

The AddOn® GLC-TE-AO SFP transceiver with RJ-45 10/100/1000Base-T network LAN interface, transfers data at the rate of 1 Gb/s over twisted pair copper media. It offers data transmission over the operating range of 100 m. This transceiver incorporates Gigabit Ethernet technology to employ faster data transmission. It is compatible with 2000 connected grid router series, Catalyst 2960-X series, IE2000/IE3000 series and Nexus 7000/9000 series. This hot-swappable transceiver is ideal for data networking..Hot-swappable SFP transceiver for data networking.Dimensions: 0.3"H x 0.5"W x 2.2"D.Interface/ports: One RJ-45 10/100/1000Base-T network LAN.Ethernet technology: Gigabit Ethernet.Media type supported: Twisted pair copper.Maximum data transfer rate: 1 Gb/s.Operating range: 100 m.Compatibility: 2000 connected grid router series, Catalyst 2960-X series, IE2000/IE3000 series, Nexus 7000/9000 series.Comes with lifetime limited warranty

USB to Ethernet Adapter, USB 3.0 to 10/100/1000 Gigabit Ethernet LAN Adapter, 1ft/30cm Attached Cable, USB to RJ45 Adapter.USB 3.0 network adapter adds an Ethernet port to your laptop or desktop computer at Gigabit speeds.USB to RJ45 adapter works with 10/100/1000 Mbps BASE-T networks; Status & Activity LEDs; 9K Jumbo Frames | VLAN Tagging | Wake on LAN | Auto MDIX.USB NIC adapter with built-in 11.8in cable | USB bus powered.USB to Ethernet Adapter NIC uses Realtek RTL8153 for Plug and Play / No Driver install on Windows/macOS/Ubuntu/Chrome OS.USB-A 3.2 Gen 1 and backward compatible with USB 2.0/1.1.USB Network Adapter | Gigabit | USB 3.0/3.2 Gen 1 | RJ45

You can now increase the speed of your computer's network without installing a new network card. The Monoprice adapter comes with a USB 3.0 connector at the front end and a Gigabit Ethernet on the other end, for smooth transmission. The head of the USB 3.0 connector of this Gigabit Ethernet Adapter has a sleek design, thus it does not obstruct the other ports..USB 3.0 to Gigabit Ethernet Adapter to improve your network performance.Other (360015).Compatible with Windows, Vista, XP, 7, and 8; Android, Mac, and Linux operating systems.The Monoprice USB 3.0 to Gigabit Ethernet Adapter is designed to speed up the wired internet connection.

The AddOn® GLC-T-10G-AO transceiver module with RJ-45 10GBase-TX network LAN interface, transfers data at the rate of 10 Gb/s over twisted pair copper media. It offers data transmission over the operating range of 30 m. This transceiver module incorporates 10 Gigabit Ethernet technology to employ faster data transmission. This hot-swappable transceiver module is ideal for data networking..Hot-swappable SFP+ transceiver module for data networking.Dimensions: 1.2"H x 2.8"W x 4.8"D.Interface/ports: One RJ-45 10GBase-TX network LAN.Ethernet technology: 10 Gigabit Ethernet.Media type supported: Twisted pair copper.Maximum data transfer rate: 10 Gb/s.Operating range: 30 m.MSA compliant.Comes with lifetime limited warranty

The HPE Aruba Networking J8177E is a reliable SFP transceiver module designed for efficient wired connectivity. Featuring a plug-in module form factor, it supports a data transfer rate of 1 Gbps, ensuring quick and effective communication within your network. This transceiver adheres to Cat5e standards and is capable of a maximum transfer distance of 100 m, making it a versatile choice for various networking scenarios. With its RJ-45 connectors, the J8177E provides straightforward installation and compatibility, allowing for seamless integration into existing setups. This robust module enhances networking performance and reliability, ensuring that your data communication needs are met with ease..Durable and lightweight Plastic Optical Fiber (POF) for reliable data transmission. Equipped with an LC fiber connector for high-performance and secure connections..Its a transceiver module used for network connectivity..Has the following data transfer rates: 1000 Mbps (Megabits per second), 1 Gbps (Gigabit per second).supports a maximum distance of 100 meters (328 feet) for data transfer..It is Capable for both Gigabit and Ethernet..Typically consumes around 1 watt of power..Has a Mean Time Between Failures (MTBF) of approximately 2 million hours, ensuring exceptional reliability and longevity..Typically sold in the following quantities: Selling Quantity: 1 unit.

USB-C to Ethernet Adapter, 10/100/1000 Mbps, Gigabit Network Adapter, ASIX AX88179A, 1ft/30cm Cable, Windows/macOS/Linux.USB 3.0 Type-C network adapter adds an Ethernet port to your laptop or desktop computer at Gigabit speeds.USB-C to RJ45 adapter works with 10/100/1000 Mbps BASE-T networks | Status & Activity LEDs | 9K Jumbo Frames | VLAN Tagging | Wake on LAN | Auto MDIX.USB NIC adapter with built-in 11.8in cable | USB bus powered.USB to Ethernet Adapter NIC uses ASIX AX88179A chipset for driverless install on Windows/macOS/Ubuntu/Chrome OS.USB-A 3.2 Gen 1 and backward compatible with USB 3.0/2.0.Add a Gigabit Ethernet port to your MacBook&®, Chromebook™ or laptop with USB-C

Industrial Fiber to Ethernet Media Converter - 1Gbps SFP to RJ45/ Cat6 - Singlemode/Multimode Optical Fiber to Copper Gigabit Network - 12-56V DC - IP-30/ -40 to +75C (IMC1GSFP).INDUSTRIAL FIBER TO ETHERNET MEDIA CONVERTER: Extends & converts 1Gbps fiber to RJ45 copper w/ hardened operating temp -40C to 75C; powered by 12V-56V DC for compatibility with solar, auto & rail.OPEN SFP SLOT: Compatible with any standard SFP and can be used for multimode or single mode fiber connections; easy deployment across applications, fiber distances or fiber cable types.ROBUST DESIGN: Industrial Gigabit Network Media Converter w/MTBF of 500,000+ hrs @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years; this media converter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: 1 Gbps | 12V-56VDC | Single Mode SMF & Multi-Mode MMF Fiber | 16K Jumbo Frames | LFP | IP-30 Housing | DIN or Wall Mountable | Terminal Block and/or Barrel Adapter for power redundancy.Gigabit Media Converter | SFP to RJ45 (Cat6) | MTBF: 500,000+hrs @ 50°C | 12V-56VDC

The Plugable USBC-E1000 USB TYPE-C Gigabit Ethernet adapter helps you to maximize the network access speed. This adapter helps in faster HD video streaming, gaming, web browsing, network storage and more. The compact adapter is perfect travel companion for any laptop or tablet due to its USB bus powered design. This adapter is compatible with Windows, Linux and Mac operating systems. The adapter is useful for adding additional network interfaces and for transferring the files over Ethernet..USB Type-C gigabit Ethernet adapter helps you to maximize the network access speed.Network technology: 1000Base-T.Number of network (RJ-45) ports: 1.Host Interface: USB Type C.Device supported: Notebook.Form Factor: Desktop.High performance packet transfer rate over USB bus using proprietary burst transfer mechanism (US patent approval).USB Type-C male to RJ45 female adapter supporting gigabit Ethernet at USB Type speeds.Supports all USB power saving modes (U0, U1, U2 and U3), supports 10/100/1000 with auto-sensing (IEEE 802.3, 802.3u and 802.3ab).IPv4/IPv6 checksum offload engine, crossover detection and auto-correction, TCP large send offload and IEEE 802.3az energy efficient Ethernet.Supports dynamic cable length detection and dynamic power adjustment green Ethernet (Gigabit mode only)

The Netgear® ProSafe® AGM734 Gigabit Ethernet SFP transceiver has RJ-45 100Base-T connector and SFP slot to provide reliable connection. It has a data transfer rate of 1 Gbps. The transceiver for data networking, drives Gigabit Ethernet up to 100 m distance with category 5E/category 6 copper connectivity. It is compatible with SFP+ interfaces of XSM7224S and SFP interfaces of GSM7328FS switches..Suitable with SFP+ interfaces of XSM7224S and GSM7328FS.Comes in silver color.Interface/ports: One RJ-45 1000Base-T network LAN, SFP slot.Media type supported: Twisted pair.Ethernet technology: Gigabit Ethernet, 1000Base-T.Data transfer rate: 1 Gbps

Add reliable and cost-effective Gigabit Ethernet connections over copper, with this SFP module. This 1000Base-TX SFP module delivers what you need most in your network connections: reliable performance. It's built to exacting MSA specifications and fully tested to ensure seamless compatibility. The RJ45 copper SFP transceiver module offers a cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Delivers Gigabit Ethernet connections With data transfer rates of up to 1Gbps, this SFP module can be installed into networking equipment with an MSA compliant port and RJ45 copper interface. It delivers dependable Gigabit connectivity over copper cable for 1000Base-TX compliant networks, with a maximum distance of up to 100 m (328 ft.)..Delivers reliable RJ45 Gigabit Ethernet connections for 1000Base-TX compliant networks.Meets or exceeds MSA (Multi-Source Agreement) industry standards.Backed by lifetime warranty and free lifetime technical support

This StarTech Thunderbolt to Ethernet 10G adapter is a robust and durable solution for IT professionals looking to add an RJ45 port to their Thunderbolt-enabled computer. This adapter supports multi-gigabit speeds, including 10/5/2.5/1Gb/s and 100Mb/s Base-T speeds. In addition, 10GBASE-T and 5GBASE-T/2.5GBASE-T (NBASE-T) capabilities ensure compatibility with the latest network switches and access points..Thunderbolt Ethernet adapter adds one multi-Gigabit RJ45 port to a Thunderbolt 3/4 enabled computer enabling connection to 1G, 2.5G, 5G, and 10G networks.Included detachable 27.5" Thunderbolt 3 cable ensures reliable network performance.Thunderbolt 3 female to RJ45 female.Leverage the high-speed capabilities of Thunderbolt 3 to attain speeds of up to 10GbE, using this Thunderbolt to Ethernet NIC Adapter.Marvell AQC107S chipset facilitates plug and play (PnP) support on Windows and macOS.Simplify deployment, installation, and maintenance with features such as Wake-on-LAN, Status LEDs, Auto negotiation, and NBASE-T support.Bus-powered, features a compact and portable form factor.Durable all-aluminum chassis acts as a heatsink, for silent passive cooling.Optimize the performance and security of this Adapter, using the included MAC Address Changer, USB Event Monitoring, Windows Layout & Wi-Fi Auto Switch utilities (available for download).2-year manufacturer limited warranty