Gigabit Ethernet PCIe

The Intel Ethernet 10 Gigabit Converged Network Adapter X520-DA2 enables data center transformation by delivering a reliable, unified 10GbE network connection. Advanced platform scalability features include: Receive Side Coalescing, Intel Ethernet Flow Director, and support for PCI Express Gen2. Intel VT-c delivers industry-leading I/O virtualization capabilities, including support for Single Route I/O virtualization (SR-IOV) and Virtual Machine Device Queues (VMDq). The Intel Ethernet Converged Network Adapter X520 provides advanced unified networking capabilities, including support for iSCSI, NFS, and FCoE. The Intel Ethernet Converged Network Adapter X520 facilitates greater network infrastructure consolidation and is the best choice for I/O virtualization..Ethernet adapter featuring a PCI Express 2.0 x8 interface, delivering 10 Gigabit network performance..Supports a data transfer rate of 10,000 Mbps..Comes with 2 SFP+ ports..Compatible with servers, workstations, and enterprise platforms..Backed by a 1-year limited warranty.

Allied Telesis™ Gigabit ethernet card is featured with jumbo frames to send large packets and these packets are normally up to 9000 bytes long. Gigabit ethernet is featured with PCIe x1 bus to enable maximum throughput..Flow control, ACPI support, auto-negotiation, load balancing, VLAN support, full duplex mode, jumbo Frames support.Data transfer rate: 1 Gbps.Host interface: PCI Express x1.Dimensions: 2.7"(H) x 3.6"(W).Form factor: Plug-in card.Wavelength: 850 nm.Max transfer distance (Optical): 720'.Status indicators: Link activity, link OK.Card height: Full-height, low-profile.Optical sensitivity: -17 dBm.Output optical power: -9.5/-1.5 dBm.Multi-mode fiber.VLAN support.jumbo frames.Weight: 2.08 oz..Allied Telesis™ Gigabit ethernet card is used to boost the speed of the network and is limited to a maximum size of 1548 byte.

Add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x1 (or higher) slot in an IT Administrator workstation or server backplane, using StarTech this 1-Port SFP network controller. The network controller features an Intel I210 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x 1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps.Has one SFP slot.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I210 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slot for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.2-year manufacturer limited warranty

The AT-2911 Series Gigabit Ethernet Network Adapters are integrated Ethernet network interface cards based on Broadcom's BCM5718 chipset with a PCI Express (PCIe) x1 version 2 interface. The AT-2911 series adapter connects a PCIe compliant computer to a Gigabit Ethernet network. Allied Telesis offers models equipped with a single port interface or dual port interface in the AT-2911 series. The AT-2911 adapter is equipped with single or dual fiber optic connector, copper connector, SFP slot, or a combination of these connectors..This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.Enjoy superfast data transfer of up to 250 MB/s with PCI Express x1 card, between the network card and motherboards.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable

The StarTech ST1000SPEXI gigabit Ethernet network card features gigabit Ethernet PCI Express x4 interface card with single RJ-45 port. The RJ-45 port is fully compatible with IEEE 802.3/U/AB standards and offers maximum throughput up to 1000 Mbps auto-negotiation. Advanced features such as jumbo frames, wake-on LAN, auto MDIX and VLAN tagging for optimizing network traffic. Network card is ideal for many business applications requiring upgrades to servers or workstations, adding feature-rich gigabit networking..Gigabit Ethernet network card is suitable for use with PC.Powerline adapter speed: 2000 Mbps.Features 10/100/1000base-T RJ-45 connector.Dimensions: 0.7"H x 2.6"W x 4.7"L.Power consumption: 0.8 W.Meets RoHS, Green compliant certification and standards.PCI Express host interface is for better performance.Form factor: Plug-in card.Supports twisted pair for transmission of both analog and digital signals.Intel I210-AT chipset allows interface card to be compatible with different operating systems.Includes 1-port network card, low profile bracket and instruction manual.Weight: 1.2 oz..Comes with 2 years warranty.The StarTech 2000 Mbps gigabit Ethernet network card is based on Intel I210-AT chipset, that makes it compatible with Windows and Linux operating systems.

Increase your bandwidth up to 10 Gbps with this StarTech SFP+ card for enhanced data transfer rate using fiber optic cable. Reduce wait times for large file transfers, content sharing, network storage, or any other high bandwidth application. This PCIe network card has an open SFP+ slot that can accept any MSA-compliant module or direct attach cable (DAC). It is compatible with multimode, single-mode, and copper SFP+ modules. This card is natively supported in Windows 11. For security and privacy reasons a fiber network card is the ideal point-to-point network adapter. Eliminate EMI with a fiber connection and cover longer distances with fiber to host..Network controller to add a 10GbE SFP+ module to a PCI Express (PCIe) 3.0 x 4 slot in your workstation.Provides Ethernet speeds up to 10Gbps.Has one SFP+ slot.Compatible with both MSA-compliant and branded 10GB SFP+ modules.Meets or exceeds the RpHS and WEEE standards.An open SFP+ slot to make changes as needed just by swapping the module in use, whether it is fiber, copper, or direct attach cables (DAC).9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network managemen.Full-profile bracket are installed by default, with a low-profile bracket included.2-year manufacturer limited warranty

The Intel 2-port Gigabit Ethernet converged network adapter meet the needs of the next-generation agile data center by providing flexibility for LAN/SAN networking. This low profile adapter offers superior performance up to 80 Gb/s bi-directional throughput. It has Ethernet flow director for hardware based application traffic steering and I/O virtualization innovations for optimum performance. This adapter features excellent small packet performance for network appliances and network function virtualization for reliable performance. It has data plane developer kit for efficient packet processing..Gigabit Ethernet network adapter provides unmatched features for virtualization, flexibility for LAN and SAN networking.Interfaces/ports: PCI Express 3.0 x8, SFP+ slot.Management protocols: Large Send Offload (LSO), packet filtering, PXE support, Quality of Service (QoS), Receive Side Scaling (RSS).Data transfer rate: 10 Gb/s.Dimensions: 2.7"H x 6.6"W.Meets BSMI, C-Tick, Directive 2011/65/EU, FCC Class B, KCC, MSA SFF-8431, RoHS, UL and VCCI certifications or standards.Form factor: Plug-in card.Remote management: RMON, SNMP, Network transport protocol: iSCSI, TCP/IP, UDP/IP.Media type supported: Twinaxial, Device supported: Server.Status indicators: Link/activity, port transmission speed.System requirements: FreeBSD 10, FreeBSD 9, Linux Kernel 2.6.32, Linux Kernel 3.x, Microsoft Windows Server 2008/Server 2008 R2/Server 2008 R2.Operating temperature: 32 - 131 deg F.Comes with lifetime limited warranty

Intel® 4-Port ethernet server adapter has 4 x PCI express 2.1 host interfaces and supports PC as well as server platforms. Adapter includes 4 RJ-45 ports and uses copper as conducting material to resist corrosion..Dimensions: 2.7"H x 5.3"W.For PC.Form factor: Plug-in card.Conductor: Copper.Host interface: PCI Express 2.1 x4.Network technology: 10/100/1000Base-T.Total number of ports: 4.Connectivity technology: Wired.Cabling type: Cat 5 up to 100 m, Bracket height: Low and full-height.Storage over Ethernet: iSCSI, NFS.Speed: 5 GT/s, Slot width: x4 lane.Thermal design power: 5 W.Addresses the demanding needs of the next-generation agile data center by providing unmatched features for both server and network virtualization, flexibility for LAN and SAN networks, and proven, reliable performance.Certifications and standards: ACPI, BSMI, C-Tick, FCC, KCC, UL, VCCI.Intel® 4-Port ethernet server adapter has 10/100/1000Base-T network technology and supports twisted pair media to reduce signal interference.

10GBase-T PCIe Network Adapter with backward compatibility of 5/2.5/1G and 100Mbps; RJ45 port and built-in QoS Hyper-fast 10Gbps Networking - Enjoy up to 10X-faster data-transfer speeds for bandwidth-demanding tasks. Complete Compatibility - XG-C100C is compatible with current network standards, including 10/5/2.5/1Gbps and 100Mbps, for seamless backward compatibility. Compatible with Windows and Linux - Supports Windows 10 and Linux Kernel 4.4 for flexible OS integration. RJ45 Port for Easy Migration - Easily upgrade to 10Gbps networking using standard copper network cables. Prioritize Your Games - Built-in Quality-of-Service (QoS) technology lets you prioritize bandwidth and supported gaming packets for a smooth gaming experience..10Gigabit Ethernet card offers the flexibility and scalability to make infrastructure run as efficiently and productively as possible with 10Gigabit data transfer rate.Enjoy superfast data transfer of up to 2000 MB/s with PCI Express x4 card, between the network card and motherboards.This single port 10gigabit ethernet card enables you to connect your computer system to your existing network.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable

The new Intel Ethernet Converged Network Adapter X540-T2 is the lowest cost way to deploy 10 GbE in your data center today. Install the X540 adapter into a server and the auto-negotiation between 1 GbE and 10 GbE provides the necessary backwards compatibility that most customers require for a smooth transition and easy migration to 10 GbE. When time and budget allows, 10GBASE-T switches can be added any time to experience the full benefits of 10 GbE. The wait for a low cost 10 GbE copper solution to broadly deploy 10 GbE to all corners of the data center is over. The new X540, dual-port adapter provides bandwidth-intensive applications with highly affordable 10GbE network performance and cost-effective RJ-45 connectivity for distances up to 100 meters..Ethernet network adapter with PCI Express 2.0 x8 interface, supporting high-speed 10 Gigabit connectivity..Supports up to 10,000 Mbps for ultra-fast data transmission over copper Ethernet connections..Equipped with 2 Ethernet ports..Works with Cat6/Cat6a Ethernet cables and 10GbE-capable switches or routers for optimal performance..RoHS compliant, ensuring environmentally safe construction with restricted use of hazardous materials..Backed by a Limited Lifetime Manufacturer Warranty.

The Allied Telesis Gigabit Ethernet card supports data transfer of up to 250Mbps with PCI Express card and 1000Mbps using 1000Base-X technology. This card facilitates optical fiber cable to span longer distances and excellent data transfer rate between servers and network components..Enjoy superfast data transfer of up to 250 MB/s with PCI Express card, between the network card and motherboards.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable

Running low on expansion slots? Merge USB 3.0 and GbE into a single PCIe combo card - 3 Port PCI Express USB 3.0 Card + Gigabit Ethernet - Installation flexibility to fit standard & low-profile PCs - Frees up a PCIe slot by consolidating 3x USB 3.0 & 1x Gigabit Ethernet into a single card - UASP Support - Optional SATA Power - Save money and connect existing devices with USB 2.0 and 1.x backward compatibility - USB 3 with Network Adapter Card.Frees up a PCIe slot by consolidating 3x USB 3.0 & 1x Gigabit Ethernet ports into a single card.Provides installation flexability for standard and low-profile computers, with a dual-profile design.Lets you save money and connect your existing devices with USB 2.0 and 1.x backward compatibility.Perfect for high-powered USB devices, with optional SATA power providing up to 900mA per port.PCIe x1 interface, compliant with PCI Express 2.0 specifications.Supports Wake-On-LAN, Energy-Efficient Ethernet, jumbo frames, full duplex flow control, VLAN tagging, and layer 2 priority encoding

Intel provides data centers worldwide with innovative Ethernet components and solutions that are extensively tested for network interoperability, reliability, and performance. Intel Ethernet controllers, adapters and accessories deliver speeds from 1 to 100GbE - with versatile capabilities to optimize workload performance..Intel X710 Ethernet adapter delivers high speeds and versatile capabilities to optimize workload performance.Data rate per port: 10GbE/5GbE/2.5GbE/1GbE/100Mb.Equipped with four Ethernet ports.Compatible with motherboards equipped PCIe x8 system interface.Features: On-chip QoS and Traffic Management, Flexible Port Partitioning, Virtual Machine Device Queues (VMDq), PCI-SIG SR-IOV Capable, Intel Data Direct I/O Technology, Intelligent Offloads, Storage Over Ethernet (iSCSI, NFS).Cabling type: RJ45 CAT-6, CAT-6a, CAT-5e up to 328'.5-year manufacturer limited warranty

The Allied Telesis™ 2911 Series AT-2911SX/ST-901 1000SX ST PCI Express x1 Gigabit network adapter is compatible with Windows 10/8/7/Vista/XP/Server 2008 R2/Server 2008/Server 2003 64- or 32-bit, Server 2012 R2 64-bit/Server 2012, 64-bit and Linux 2.6. It includes 1000SX/ST connector. It has -17 dBm optical sensitivity, -9.5/-4 dBm optical power output and 850 nm wavelength. It features various status indicators such as LED On for link up, LED Off for link down and blinking for activity indication. It consumes 1.51 to 2.42 W power and requires signaling voltage of 3.3 V. It supports 1000Base-SX network technology..Gigabit network adapter delivers faster, more efficient processing of network traffic.Dimension: 3.5" x 2.7".Bus type: PCIE.Bus width: PCIEx1.Interface type and connectors: 1000SX/ST connector, Optical sensitivity: -17 dBm, Output optical power: -9.5/-4 dBm, Wavelength: 850 nm.Compatible OS: Windows 10/8/7/Vista/XP/Server 2008 R2/Server 2008/Server 2003 64- or 32-bit, Server 2012 R2 64-bit/Server 2012, 64-bit, Linux 2.6.Ethernet: IEEE 802.1p Quality of Service, IEEE 802.1Q VLANs, IEEE 802.2 LLC, IEEE 802.3ac MAC, IEEE 802.3az Energy-Efficient Ethernet.Status indicators: LED On: Link up, Off: Link down, Blinking: Activity.Media type supported: Optical fiber.Number of ports: 1, Power: Power consumption: 1.51 to 2.42 W (varies by model), Signaling voltage: 3.3 V.Network technology: 1000Base-SX.Form factor: Plug-in card.Meets RoHS, UL, FCC/EN55022 Class A, TUV, EN55024, CE, C-TICK, VCCI, IEEE 802.3ae, IEEE 802.3ad, IEEE 802.1Q, IEEE 802.1p certifications and standards.Weight: 0.13 lb

StarTech.com® PCI Express gigabit ethernet fiber network card has a dual profile design and includes low profile/half height bracket for easy installation. Card is compatible with Windows 8, 8.1, 7, Vista, XP, Mac OS 10.5, Linux 2.6.x and 3.5.0 OS..1x PCI express x1, 1x SFP slot female.4.6"(H) x 0.7"(W) x 5"(D).Windows 8/8.1 (32/64bit)/7 (32/64)/Vista (32/64)/XP (32/64), Windows Server 2012/2008 R2/2003, Mac OS 10.5 and up (Tested up to 10.9), Linux 2.4.x/2.6.x/3.5.0, Microsoft Hyper-V operating systems.Wired.Data transfer rate: 2 Gbps (full-duplex).Form factor: Plug-in card.Buffer size: 48KB.Power consumption: 3.2 W max.Chipset ID: Realtek RTL8168E, Marvell 88E1111B.LED indicators: Link (green), activity (yellow).Temperature: 0 - 45 deg C operating, -20 - 70 deg C storage, Humidity: 5 - 95% RH (non-condensing).Applications: Ideal for secure setups, perfect for remote embedded industrial monitoring systems, and high-speed video surveillance.Compatible with most Gigabit SFP modules.Supports full/half-duplex auto-negotiation, auto-MDI/MDIX.No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.Includes 1 Port PCI Express Gigabit SFP network card, low-profile bracket, driver CD, instruction manual.Certification and standards: CE, FCC, RoHS.Weight: 2 oz..Warranty: 2 years limited.StarTech.com® PCI Express gigabit ethernet fiber network card supports maximum data transfer rate of 2 Gb/s at full duplex mode and has a SFP female slot to ensure flexible network configuration.

1-Port USB 3.2 Gen 2x2 PCIe Card - USB-C SuperSpeed 20Gbps PCI Express 3.0 x4 Host Controller Card - USB Type-C PCIe Add-On Adapter Card - Expansion Card - Windows & Linux (PEXUSB321C).COMPATIBILITY: Add-on card installs in full or low-profile (bracket incl) PCIe 3.0 x4 slot (Backward compatible w/PCIe 2.0); Windows/Linux/macOS w/auto drivers Win 8 & up; Works w/USB 3.1/3.0/2.0 devices.FULL USB 3.2 GEN 2X2 SPEEDS: Featuring the ASMedia ASM3242 host controller using x4 lanes of PCIe 3.0, this card is fully capable of speeds up to 20Gbps enabling fast access to high-performance devices like NVMe drives and SSDs.HIGH PERFORMANCE: Add 1x USB-C SuperSpeed 20Gbps port to your desktop PC with this USB 3.2 Gen 2x2 PCIe Card; Expansion card provides up to 15W (5V @ 3A) to power & charge devices.MAXIMIZED USB PERFORMANCE: USB Type-C PCI Express card supports Multiple INs to reduce bandwidth loss when mix speed devices are connected to a Hub (hub must also support this feature); UASP support improves performance with storage devices.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years; This USB-C PCI-e adapter card is backed for 2-years by StarTech.com, incl. free 24/5 North America based multi-lingual tech support.USB 3.2 Gen 2x2 (20 Gbps) | PCI-Express 3.0 | PCIe x4 Slot | USB Type-C

Intel I350-T2 chipset supports reliable and advanced network connectivity Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support..Type of Product/Use: Gigabit Ethernet Card for Server.Adapter Speed: Gigabit Ethernet.Number of ports and Type:2 RJ-45.Dimensions as H x W x D in inches: 0.79" x 5.43" x 4.72".Installation Info: Plug-in Card.Warranty: 1 Year.Features innovative power management including Energy Efficient Ethernet (EEE) and DMA Coalescing to increase efficiency and reduce power consumption.Fits both standard and low profile system chassis with the included spare low profile bracket.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Quickly adds two independent Gigabit Ethernet ports through an available PCI Express slot to server or desktop systems

The Intel Ethernet Network Adapter I226-T1 is ideally suited for personal computers and workstations used for enterprise, gaming, and home networks. These systems require more bandwidth than ever before. This ultra-compact, easy-to-integrate PCIe 3.1 x1 adapter, is a cost-effective networking solution for speeds up to 2.5GbE. The I226-T1 is also designed with a ventilated bracket, for increased efficiency and reduced power consumption..Ethernet Network Adapter.Maximum Data Transfer Rate: 2.50 Gbit/s.Network Technology: 2.5GBase-T.Form Factor: Plug-in Card.Bracket Height: Low Profile and Full Height.Device Supported: Computer/Workstation.Chipset Model: I226-LM.Host Interface: PCI Express 3.1 x1.Number of Network (RJ-45) Ports: 1

The StarTech ST4000SPEXI 2000 Mbps Gigabit Ethernet network card is compatible with Windows 10, 8 / 8.1, 7, Windows Server 2012, 2008 R2, Linux 2.4.x and later OS. It supports twisted pair cable, Linux/PC platform, Intel I350-AM4 chipset, jumbo frames up to 9K. This network card installs easily into a broad range of computer/server chassis, regardless of form factor..Network card helps to add more network ports to a workstation or server for redundancy or virtualization.Offers 20000 Mbps speed for fast, high-bandwidth connectivity.Supports four PCI Express x4 and four RJ-45 ports for good connectivity.Dimensions: 4.7"H x 0.7"W x 5.2"L.Installs easily into a broad range of computer/server chassis, regardless of form factor.Power: 4.4 W.Meets RoHS, FCC, CE compliant certification or standards.Form factor: Plug-in card.Supports twisted pair media type, Linux/PC platform, Intel I350-AM4 chipset, jumbo frames upto 9K.Compatible with Windows 10, 8 / 8.1, 7, Windows Server 2012, 2008 R2, Linux 2.4.x and later OS.LED indicators: 4 x 100/1000 Mbps, 4 x link/activity, Network technology: 10/100/1000Base-T.Environmental conditions: 41 - 122 deg F operating temperature, -4 - 140 deg F storage temperature, 20 - 80% RH humidity.Offers PXE network boot, auto MDIX and negotiation support, wake-on-LAN support, full or low-profile installation and full duplex support.Includes low-profile bracket and instruction manual.Weight: 3.4 oz..Comes with 2 years warranty.The StarTech 2000 Mbps Gigabit Ethernet network card adds more network ports to a workstation or server for redundancy or virtualization.

This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity.The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware.Contains PCI Express, SATA power (15 pin), and RJ-45 (PoE+).Supports the IEEE 802.3af and IEEE 802.3at (Type 1 and Type 2) standards for Power Sourcing Equipment (PSE) and can deliver up to 48V DC and 25.5W of power to compliant Powered Devices (PD).Leverages Intel vPro technology for remote management and troubleshooting capabilities. Improve bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and the streaming of online content.Access up to 2.5GBASE-T speeds using Cat5e (or better) cabling, to maximize existing networks and equipment.Connect Power over Ethernet enabled IP cameras, phones, or Wireless Access Points.Provide power to remote powered devices that require a PoE power source.Add multi-gigabit connectivity to a desktop or server.Compatible with Windows 10, 11; Windows Server 2019, 2022; Linux 5.8.x and up.Box contains: network card, low-profile bracket, quick start guide.2-year manufacturer limited warranty.This card supports the following advanced features: PXE Boot, WoL, VLAN tagging, 9 K jumbo frame, full-duplex, and Intel vPro technology..This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.

The StarTech ST1000SPEX43 4-port PCIe Gigabit network adapter card offers 4-channel networking and a maximum throughput of up to 1000 Mbps in each direction. It features the Realtek RTL8111G chipset for reliable network connections to your server or computer. This adapter supports full-duplex flow control, auto negotiation with next-page capacity, up to 9K jumbo frame, IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding, wake-on-LAN and remote wake-up. It is great for many SMB and enterprise applications such as virtualized environments that require multiple NICs..Network adapter card offers simultaneous access to multiple networks for desktop PC clients, servers and workstations.Dimensions: 0.7"H x 4.7"W x 5.4"D.Comes in yellow color.Interface/ports: one PCI express x four male, four RJ-45 female (external).Data transfer rate: 2000 Mbps (full duplex), Jumbo frame support: 9K max.Chipset ID: Realtek RTL8111G, Industry standards: Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab.Compatibility with Windows 10 (32/64), 8, 8.1, 7, Vista, XP, 2000, ME, 98SE, Windows Server 2012, 2003, Linux Kernel 2.4.x and up operating system.LED indicators: four link and four activity.System and cable requirements: Available PCI Express x4 or higher (x8, x16) slot.Temperature: 0 - 55 deg C (operating), -40 - 70 deg C (storage), Humidity: 5 - 95% RH.Contains one PCIe gigabit network card.Meets CE, FCC and RoHS certifications and standards.Weight: 3.5 oz..Comes with 2 years warranty

This StarTech four-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer. The USB 3.2 card offers two USB Type-C port (10Gbps), and two traditional USB Type-A ports (10Gbps). By offering two different USB port types, you can easily connect a variety of USB devices to your desktop computer. Because the card offers 10Gbps USB ports, you can save time and avoid the performance bottlenecks that are often associated with other connectivity technologies..This four-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer.The USB ports offer a data throughput of up to 10Gbps, so you can spend less time waiting for file transfers to complete or for access to your external peripherals.Contains two external USB-C port (USB 10Gbps), two external USB-A ports (USB 10Gbps).Dimensions: 0.9"H x 3.3"W x 4.4"D.Lets you bridge the gap between devices that use different connectors; you can simultaneously connect and access USB Type-A and USB Type-C devices, while using only a single PCI Express expansion slot.By adding two types of USB ports in one combo card, you can free up space in your PC case, and eliminate the nuisance of having different cards for different USB devices.Backward compatible with legacy USB 3.0, 2.0 and 1.1 devices, so you can eliminate the added expense and aggravation of purchasing new devices.USB PCIe expansion card with SATA power supplies supplemental power to the USB ports (when motherboard power is insufficient) providing up to 5V 3A/15W per USB Type-C port & 5V 0.9A/4.5W per USB Type-A port.Installs in full-profile PCIe 3.0 (x4 slot) desktop/server; lower performance with PCI-e 2.0; Windows/Linux/macOS auto driver install (Windows 8 and up).2-year manufacturer limited warranty

This StarTech five-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer. The USB 3.2 card offers a USB Type-C port (10Gbps), two traditional USB Type-A ports (10Gbps), and a motherboard header (USB 5Gbps). By offering a range of USB port types, you can easily connect a variety of modern and legacy USB devices, both inside and outside your computer. Because the card offers a 10Gbps USB ports, you can save time and avoid the performance bottlenecks that are often associated with other connectivity technologies..This five-port USB 3.2 Gen 2x1 (10Gbps) combo card makes it easy to add to the performance and connectivity of your computer.PCI Express combo card leverages the performance potential of USB 3.2 Gen 2x1 (10Gbps) to help you work faster.Contains a USB Type-C port (10Gbps), two traditional USB Type-A ports (10Gbps), and a motherboard header (USB 5Gbps).Dimensions: 0.6"H x 4"W x 2.7"D.Lets you bridge the gap between devices that use different connectors; you can simultaneously connect and access USB Type-A and USB Type-C devices, while using only a single PCI Express expansion slot.By adding three types of USB ports in one combo card, you can free up space in your PC case, and eliminate the nuisance of having different cards for different USB devices.With two internal motherboard-style headers, this dynamic USB 3.1 card is perfect for upgrading or building your own computer.Backward compatible with legacy USB 3.0, 2.0 and 1.1 devices, so you can eliminate the added expense and aggravation of purchasing new devices.Great for file backups, video editing, and data recovery, using high-bandwidth USB 3.1 Gen 2 external storage solutions.2-year manufacturer limited warranty

Startech.com® PCI Express gigabit Ethernet multimode SC fiber network card includes low profile and half height installation brackets for secure attachment. Network card is compatible with Windows 7/8/8.1/ XP/Vista, Linux and Mac OS..Plug-in card.Dimensions: 4.6"(H) x 0.7"(W) x 4.7"(L).Interface/port: External ports: 1 x Fiber optic SC duplex female, Host interface: PCI-express x 1 Male.Software requirement: OS compatibility: Windows 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64), Windows Server 2012, 2008 R2, 2003, Mac OS 10.5 and up (tested up to 10.9), Linux 2.4.x/2.6.x/3.5.0, Microsoft Hyper-V.Card type: Standard profile (LP bracket incl.).Data transfer rate: 2000 Mbps (2 Gbps) full-duplex, Buffer size: 48 KB.Compatibility: PC, UART type: 16C550.Network technology: 1000Base-X.Compatible networks: 1000 Mbps, SC port type: Duplex.Operating temperature range: 0 - 45 deg C, Storage temperature: -20 - 70 deg C, Humidity: 5 - 95% RH (non-condensing).LED indicators: 1 - link (green), 1 - activity (yellow).Power consumption: 3.2W Max.Includes: 1 x port PCI-express gigabit fiber network card, 1 x Low profile bracket, 1 x Driver CD, 1 x Instruction manual.Certification and standards:: RoHS, CE, FCC, IEEE standards: 802.3z, 802.1Q, 802.1P, 802.3x.Weight: 2.3 lbs..Warranty: 2 years limited.Startech.com® PCI Express gigabit Ethernet multimode SC fiber network card supports a maximum data transfer rate of up to 2000 Mbps and is ideal for high speed video surveillance.

Add up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in an IT Administrator workstation or server backplane, using this 2-Port SFP Network Controller. The network controller features an Intel I350 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel® VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps per port.Has two SFP slots.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I310 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slots for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

This quad-port 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity across four 2.5G ethernet connections. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..Network controller to add a up to four 2.5GbE ports to a PCI Express (PCIe) 2.0 (or higher) slot in your workstation.Has a four RJ-45 ports.Compatible with Windows, Windows Server, VMware, and Linux systems.Meets or exceeds WEEE standards.Leverages Intel vPro technology for remote management and troubleshooting capabilities.Intel I225-V chipset allows for improved bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and streaming of online content, while reducing network slowdowns.Card ships in a standard-profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

This PCIe network card makes it easy to add two 10GBase-T ports to your server or workstation, providing an affordable solution for high-bandwidth applications. It supports 10GbE over Cat 6 cabling up to 55 meters and Cat 6A cabling up to 100 meters. Compatible with a broad range of operating systems, this versatile dual-port NIC reduces network slowdown/degradation when running data-intensive applications/processes such as FTPs and online storage/backup. It's a cost-effective way to enhance your server or computer capabilities by adding two powerful 10-Gigabit Ethernet ports, with support for advanced features such as VLAN tagging, jumbo frames, and Auto-MDIX..Ethernet network adapter with a PCIe interface that supports Gigabit and 10 Gigabit speeds.Supports a maximum data transfer rate of 20,000 Mbps (20 Gbps full-duplex).Features 2 Ethernet ports for high-speed network connectivity.Compatible with Windows 10/11, Windows Server 2019/2022, and Linux Ubuntu 20.04+, and works with any system featuring a PCIe x8 slot and 10GBASE-T network infrastructure.Engineered for high-performance networking with support for PXE boot, 802.3ad Link Aggregation, Auto-MDIX, and VLAN tagging.9K jumbo frames for enhanced throughput in virtualized and high-traffic environments.2-Year limited warranty

10 Gigabit for the Broad Market: The Intel Ethernet Converged Network Adapter X540 is the latest innovation in Intel's leadership to drive 10 Gigabit Ethernet into the broader server market. This adapter hosts Intel's latest Ethernet silicon, the Intel® Ethernet Controller X540, which is used by many OEMs as a single chip solution for LAN on Motherboard (LOM) to deliver 10 Gigabit Ethernet (10 GbE) on the latest server platforms..Ethernet adapter with PCI Express 2.1 x8 interface, supporting 10 Gigabit Ethernet for high-speed data transfer..Supports a data transfer rate of 10,000 Mbps per port for ultra-fast 10 Gigabit Ethernet connectivity..Equipped with 2 Ethernet ports for dual 10 Gigabit network connectivity..Compatible with servers, workstations, and high-performance desktops..Complies with RoHS standards, ensuring the product is free from hazardous substances like lead and mercury..Backed by a 1 year limited warranty.

2-Port 10Gbps USB-A & USB-C PCIe Card - USB 3.1 Gen 2 PCI Express Type C/A Host Controller Card Adapter - USB 3.2 Gen 2x1 PCIe Expansion Add-On Card - Windows, macOS, Linux (PEXUSB311AC3).COMPATIBILITY: Installs in full or low-profile PCIe 3.0 x4 desktop/server slot (lower performance w/PCI-e 2.0); Windows/Linux/macOS auto driver install (Windows 8 & up); Works with USB 3.2/3.1/3.0/2.0.HIGH PERFORMANCE: USB 3.1 Gen 2 or USB 3.2 Gen 2x1 PCIe Add-On card supports Multiple INs, maintains max bandwidth even when mixed speed devices are connected; 10Gbps per port; 1x USB-A & 1x USB-C | Upgraded version of our popular card PEXUSB311AC2.MAX PERFORMANCE WITH USB DEVICES: 2-port USB-A & USB-C PCIe card adapter supports USB Attached SCSI Protocol (UASP) optimizing USB performance w/ external storage devices like SSDs, HDDs, NVMe drives.POWER: Expansion card w/ SATA power supplies supplemental power to the USB ports (when motherboard power is insufficient) providing up to 5V 3A/15W via the USB-C port & 5V 0.9A/4.5W via the USB-A port.THE STARTECH.COM ADVANTAGE: StarTech.com offers a 2-year warranty & free lifetime 24 hour support on this dual port USB-A & USB-C PCI Express Host Controller card w/ full & low profile bracket incl..PCIe 3.0 | USB Type-C & USB Type-A | 5V 3A/15W via USB-C | 5V 0.9A/4.5W via USB-A | UASP

The Intel® X550T2 Ethernet converged network adapter is the most flexible adapter for all your networking requirements. The adapter features an Intel® Ethernet controller with RJ45 copper connector and supports 55 m on Cat6, 55/100 m on Cat6A cabling. The adapter has dual port PCIe 3.0 slot for external connectivity..Ethernet converged network adapter is perfect for today's server platforms.Interfaces/ports: 2 x RJ-45 copper.Cable: 55 m on cat6, 55 / 100 m on cat6a.Bus type: PCI express 3.0 (8 GT/s), bus width: x4 lane PCIe, operable in x8 and x16 slots.Form factor: Plug-in card.Network virtualization: VXLAN.Interrupt levels: INTA, MSI, MSI-X.Network technology: 10GBase-T.Low cost, low power 10 GbE performance for the entire datacenter, enables higher bandwidth.Lower processor usage, increased throughput.Includes network adapter, low-profile bracket, full-height bracket.RoHS compliant.Comes with limited lifetime warranty

The Allied Telesis™ AT-2914SX/LC-901 Optical fiber network adapter provides 1 Gbps networking over an existing optical fiber media. It features PCIe x1 slot for high-speed connection. This plug-in card supports 1000Base-SX network technology for added flexibility..Network adapter delivers high performance.Speed: 1 Gbps.Dimensions: 2.7"H x 3.5"W.Meets RoHS, REACH, WEEE, C-Tick, EN55022 Class A, EN55024, RoHS, TUV, UL and VCCI certifications and standards.Host interface: PCIe x1.Media type supported: Optical fiber.Network technology: 1000Base-SX.Color: Green/silver, Form Factor: Plug-in card.Connectivity: Wired.Network standards: IEEE 802.1p, IEEE 802.1Q, IEEE 802.1x, IEEE 802.2, IEEE 802.3ac, IEEE 802.3ad (LACP), IEEE 802.3z.System requirements: Linux, Microsoft Windows Vista/7/8/10.Remote management protocol: SNMP, Status indicators: Link/activity

The Base-T Ethernet PCI-Express Network Interface Card from Dell is ideal for connecting your server to your network. The Base-T Quad Port Server Adapter proven to be reliable and standards-based solutions. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system.Quad-port Ethernet network adapter with a PCI-Express interface that supports Gigabit and 10 Gigabit speeds.Delivers a maximum data transfer rate of 10,000 Mbps per port.Features four RJ-45 Ethernet ports for high-speed connectivity.Compatible with a wide range of Dell PowerEdge servers including models like R660, R760, R860, R960, C6620, HS5610, HS5620, and XR7620

This dual-port 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity across two 2.5G ethernet connections. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..Network controller to add a up to two 2.5GbE ports to a PCI Express (PCIe) 2.0 (or higher) slot in your workstation.Has a two RJ-45 ports.Compatible with Windows, Windows Server, VMware, and Linux systems.Meets or exceeds WEEE standards.Leverages Intel vPro technology for remote management and troubleshooting capabilities.Intel I225-V chipset allows for improved bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and streaming of online content, while reducing network slowdowns.Card ships in a standard-profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty

StarTech.com® 2 Port network card provides redundant connectivity to ensure an uninterrupted network connection and includes RJ-45 interface. Network card is fully compatible with IEEE 802.3/u/ab standards for 10/100/1000 Mbps auto-negotiation..Network adapter interface: PCI express x 4.Network adapter speed: 2000 Mbps, 1000Mbps.Full duplex capability, wake on LAN, auto-uplink, jumbo frames support, teaming support, large send offload, TCP segmentation offload, tagged VLAN, checksum offload support.Network adapter ports: 2 x RJ-45.Media type supported: Twisted pair.Controller processor: Intel I350-AM2.Network technology: 10/100/1000Base-T.System requirements: Windows 8.1 (32/64bit), 8 (32/64), 7 (32/64), vista(32/64), XP(32/64) Windows Server 2012, 2008 R2, 2003(32/64) Linux 2.4.x/ 2.6.x.Cabling technology: 10/100/1000Base-TX Ethernet.Data link protocols: 10MB LAN, 100MB LAN, Gigabit LAN, network / transport protocols: TCP/IP, UDP/IP.Form factor: Plug-in card, chipset ID: Intel - I350-AM2.Connectivity technology: Wired, Port style: Integrated on card, LED indicators: Link/activity.Compatibility: PC.Dimensions: 4.8"(H) x 0.7"(W) x 2.6"(D).Operating temperature: 32 - 122 deg F, storage: -4 - +140 deg F, humidity: 5 - 85% RH.Cable requirements: Available PCI express x4 or higher (x8, x16) slot, supported protocols: IEEE 802.3ad (link aggregation), IEEE 1588 (time sync) / 802.1AS, IEEE 802.1q (VLAN tagging), auto MDIX and full duplex support.Includes 2-port network card, 1 x low profile bracket, 1 x driver CD, 1 x instruction manual.Complaints and standards: FCC, CE, IEEE 802.1q/AS, IEEE 1588, IEEE 802.3/u/ab/ad, PCI express base specification 2.1, RoHS, green compliance.Weight: 2.8 oz..Warranty: 2 years limited.StarTech.com® 2 Port network card is ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs and supports twisted pair media.

2-Port USB PCIe Card with 10Gbps/port - USB 3.1/3.2 Gen 2 Type-A PCI Express 3.0 x2 Host Controller Expansion Card - Add-On Adapter Card - Full/Low Profile - Windows & Linux (PEXUSB312A3).COMPATIBILITY: USB PCIe adapter card installs in full or low-profile PCIe 3.0 x4 slot and up; Bracket included; Backward compatible w/ PCIe 2.0; Supports Win/Linux/macOS w/auto drivers on Win 8 & up.HIGH PERFORMANCE: 2-Port USB PCIe Card with ASMedia ASM3142 host controller (PCIe 3.0 x4) has two SuperSpeed 10Gbps USB-A ports (USB 3.1 Gen 2 / USB 3.2 Gen 2x1); Speeds up to 10Gbps/port; Upgraded version of our popular USB card PEXUSB312A2.MAXIMIZED USB PERFORMANCE: Add-on card supports Multiple Ins for max bandwidth when using mixed-speed devices; Supports UASP & optimized for SSDs/HDDs, NVMe, thumb drives; Supports USB 3.0/2.0 devices.POWER: USB PCI Express 3.0 expansion card w/ SATA power header supplies supplemental power to the USB ports (when motherboard power is insufficient) providing up to 4.5W (5V @ 0.9A) per USB-A port.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years; This USB-A PCI-e card for desktop is backed for life by StarTech.com, incl. free 24/5 North America based multi-lingual tech support.USB 3.2 Gen 2 (10 Gbps) | PCI-Express 3.0 | PCIe x2 Slot | USB Type-A

The Allied Telesis 2911 series AT-2911SX/SC 1000SX network adapter has PCI Express x1 host interface, one SC port and RJ-45 port for connectivity. It is compatible with PC. This adapter measures 2.7" x 3.6". It has link activity and link OK status indicators. This adapter has ACPI support, auto-negotiation, flow control, full duplex mode, jumbo frames support, load balancing and VLAN support. It comes with full-height bracket and low-profile bracket. The Gigabit Ethernet adapter offers data transfer rate of 1 Gb/s..Network adapter interface: PCI Express x1.Network adapter speed: 100 Mbps.Multi-mode fiber.Network adapter ports: 1 x SC.Network technology: 1000Base-SX.Form factor: Plug-in card.Connector type: SC.Cabling type: Ethernet 1000Base-SX.Connectivity technology: Wired.Data link protocol: Gigabit ethernet.Max transfer distance: 220 m.Network transport protocol: TCP/IP.Dimensions: 2.7"(H) x 3 1/2"(W).Weight: 0.13 lbs..Compliant standards: IEEE 802.1p.Allied Telesis Desktop fiber adapter offers high reliability, detailed tests, diagnostics and analysis. Supports network interface card for enhanced bandwidth and bus efficiency.

StarTech.com® Server network adapter card features two RJ-45 female Ethernet ports and offers full duplex support. Card offers a data transfer rate of 2000 Mbps for full-duplex transmission and 1000 Mbps for half-duplex transmission..Dimensions: 4.7"(H) x 0.7"(W) x 3.6"(L).Chipset ID: Realtek - RTL8111E, Asmedia - ASM1182E.Host interface: PCI-Express x1, Network technology: 10/100/1000Base-T- Gigabit Ethernet, Maximum data transfer rate: 2000 Mbps (full-duplex), 1000 Mbps (half-duplex).Interface/ports: 2 x RJ-45 network, Connector type: 1x PCI-Express x1 male.Form factor: Plug-in card.Device supported: Server.Performance: Auto MDIX, full-duplex support, Jumbo frame support: 9K max.Supported protocols: IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding and IEEE 802.3x full-duplex flow control.Card type: Standard Profile (LP bracket included), Port style: Integrated on card, Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, PCI express base specification 2.0.Optional low-profile/half-height bracket that can be used for installation into a standard or small form-factor computer chassis.Indicators: LED: 2 - Green - Link/Activity, 2 - Yellow - Gigabit Mode.Software: OS Compatibility: Windows® 8.1 / 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000 Windows® Server 2012, 2008 R2, 2003(32/64), Mac OS 10.4 and up, Linux 2.4.x and up.System and cable requirements: Available PCI-Express slot.Environmental: Temperature: Operating: 0 deg C to 70 deg C (32 deg F to 158 deg F), Storage: 0 deg C to 100 deg C (32 deg F to 212 deg F), Humidity: 10 approx. 90% RH.Includes 1 x PCIe network card, 1 x low-profile bracket, 1 x driver CD, 1 x instruction manual.Weight: 1.8 oz..Warranty: 2 years limited.StarTech.com® Server network adapter card contains two Ethernet ports and has a PCI express slot that allows you to connect it to client, server or a workstation.

The Dell network interface card offers a robust solution for businesses seeking high-speed and reliable connectivity for their server infrastructure. Designed to integrate seamlessly with a range of systems, including Dell's PowerEdge series such as the R6515 and R760, this component ensures compatibility with your existing hardware. Its wired connectivity, utilizing a PCI Express host interface, provides a stable and efficient data transfer rate up to 10 Gbps, making it ideal for demanding enterprise applications and data-intensive operations. This full-height PCI card incorporates four fiber ports utilizing SFP28 connectors, facilitating optimal network performance and scalability. By leveraging advanced fiber optic technology, it supports efficient and high-speed data transmission, which is crucial for maintaining operational efficiency in data centers and enterprise environments. The card's internal design allows for streamlined integration within server setups, minimizing downtime during deployment and enhancing overall system reliability..Ethernet network adapter with a PCIe interface, and it supports Gigabit Ethernet connectivity.Supports a maximum data transfer rate of 10,000 Mbps (10Gbps) per port.Features 4 Ethernet ports for high-speed wired connectivity.Compatible with a wide range of Dell PowerEdge servers, including models like R660, R760, R860, R960, T360, XR5610, and XR7620, and supports operating systems such as Windows Server and various Linux distributions

4-Port USB PCIe Card - 10Gbps USB 3.1/3.2 Gen 2 Type-A PCI Express Expansion Card with 2 Controllers - 4x USB-A - USB PCIe Add-On Adapter Card - Windows/Mac/Linux (PEXUSB314A2V2).COMPATIBILITY: USB PCIe adapter card for desktop PC installs in standard profile PCI-e 2.0 x4 slot; Supports Windows/Linux/macOS with auto driver install on Windows 8 & up; Works w/USB 3.0/2.0 devices.HIGH PERFORMANCE: USB PCIe card with 4x USB-A ports up to SuperSpeed 10Gbps per port; Dual ASM3142 controllers with up to 20Gbps total bandwidth across 4 ports; USB 3.1 Gen 2/USB 3.2 Gen 2x1; Upgraded version of our popular USB card PEXUSB314A2V.MAXIMIZED USB PERFORMANCE: Multiple INs support for max bandwidth when using mixed-speed devices; USB Attached SCSI Protocol (UASP) for storage device, like SSDs, HDDs, NVMe drives and thumb drives.POWER: USB PCI Express expansion card with SATA power header has the option to provide supplemental power to the USB ports (if motherboard power is insufficient) providing up to 4.5W ([email protected]) per USB-A port.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years; This USB-A PCIe add-on card is backed for life by StarTech.com, including free 24/5 North America based multi-lingual tech support.USB 3.2 Gen 2 (10 Gbps) | PCI-Express 3.0 | PCIe x4 Slot | USB Type-A

With Gen10 Plus ProLiant Servers, HPE offers the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers. With Gen11 ProLiant Servers, HPE continues to offer industry-leading security and builds on Gen10 Plus features by adding support for SPDM security on select ethernet adapters..Ethernet adapter for Gen10 Plus ProLiant Servers.Provides data transfer rates up to 10Gbps.Contains two SFP+ ports.Features stand up profile with PCIe 3.0 x8.Power requirement: typical: 7.9 W; max: 9.1 W

This 2.5GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..One-port 2.5Gbps NBASE-T PCIe network card with Intel I225-V chip.Provides Ethernet speeds up to 2.5Gbps.Has a one RJ-45 port.OS compatibility: Windows 10, 11, Windows Server 2019, 2022, Linux 5.8.x and up (LTS versions only), and VMware ESXi 7.0.Meets or exceeds the RoHS, and WEEE standards.The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities.The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.LAN card features built-in heat sink to keep the controller chip cool for optimal performance.Includes PCIe network card, low-profile bracket, and quick-start guide.2-year manufacturer limited warranty

This 2.5GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..One-port 2.5Gbps NBASE-T PCIe network card with Intel I225-V chip.Provides Ethernet speeds up to 2.5Gbps.Has a one RJ-45 port.OS compatibility: Windows 10, 11, Windows Server 2019, 2022, Linux 5.8.x and up (LTS versions only), and VMware ESXi 7.0.Meets or exceeds the RoHS, and WEEE standards.The PCIe network card leverages Intel vPro technology for remote management and troubleshooting capabilities.The card ships in a standard profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.LAN card features built-in heat sink to keep the controller chip cool for optimal performance.Includes PCIe network card, low-profile bracket, and quick-start guide.2-year manufacturer limited warranty

This 4-port RJ45 1Gbps OCP 3.0 Network Interface Card (NIC) features an Intel® i350-AM4 Ethernet Controller, enhancing performance and data integrity. The Ethernet card adheres to OCP 3.0 standards and ensures broad compatibility, making it an ideal solution for reliable network connectivity and robust data transfer capabilities. Optimized Network Efficiency Leverage existing Cat5e/Cat6 cabling (or better) up to 100m to maximize existing networks and equipment. The NIC supports variable speed options (10/100/1000 Mbps) with auto-negotiation and 9K jumbo frames to reduce packet overhead, reducing network slowdowns..4-Port RJ45 Gigabit OCP 3.0 Server Network Card, 1 Gbps.Maximum Data Transfer Rate 1Gbps.Number of ports 4.OS Compatibility Windows Server 2012, 2012 R2, 2016, 2019, 2022, 11, 10 VMware ESXi 7.x Linux 2.4.x and up - LTS Versions only.Chipset Model I350-AM4.Media Type Supported Twisted Pair.Form Factor: Plug-in Card.Limited Warranty 2 Year

StarTech.com® Gigabit network server adapter NIC card features PCI Express x1 interface and offers network speed of up to 1000 Mbps. Card with link/activity LED indicators supports jumbo frames, wake-on-LAN and auto MDIx features..1 x Network.Twisted Pair.Full-height, Low-profile.Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE 802.3ab standards.Processor: 1 x RTL8111E - Realtek semiconductor.Platform supported: PC, Mac.Server adapter offers performance flexibility and easy setup with support for advanced features such as Jumbo Frames, Wake-On-LAN and Auto MDIX.Includes both full profile and low profile/half-height installation brackets for installation in a wide range of computer/server chassis, regardless of form factor.Connectivity technology: Wired.Operating systems: Windows 2000/ XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8 (32/64-bit)Mac OS X (Intel based, tested up to 10.8), Linux.Operating humidity: 10 percent ... to 90 percent ... RH.Operating Temperature: 0 to 70 deg C.Supported protocols: CSMA/CD.Network technology: 10/100/1000Base-T.Form factor: Plug-in card.Green compliance: RoHs.Dimensions: 2.7"(H) x 4.7"(W) x 0.7"(D); Weight: 1.4 oz..Warranty: 2 years limited.Startech.Com® ST1000SPEX2 Gigabit Network Server Adapter NIC Card offers performance flexibility and easy setup with support for advanced features such as Jumbo Frames, Wake-On-LAN and Auto MDIX.

The Dell 540-BCOY Dual Port Marvell FastLinQ 41232 10/25GbE SFP28 OCP Network Interface Card is a high-performance network adapter designed for use in server environments. It provides two 10/25 Gigabit Ethernet ports that enable users to connect to high-speed networks with ease. This network adapter provides high-speed connectivity that enables users to transfer large amounts of data quickly and efficiently. The adapter supports speeds of up to 10/25 Gigabits per second, providing users with the bandwidth they need to support data-intensive applications and workloads..Gigabit Ethernet network adapter uses the OCP NIC 3.0 interface.Offers a maximum data transfer rate of 25,000 Mbps.Features two high-speed Ethernet ports for dual connectivity.Compatible with a wide range of Dell PowerEdge servers that support the OCP NIC 3.0 interface, including models like R650, R750, C6520, and T550

Startech Gigabit Ethernet card includes a standard profile bracket for installation in a wide range of computer/server chassis, regardless of form factor. Card adds a 10/100/1000 Mbps which is compatible with RJ45 Ethernet port..Network adapter interface: RJ45, 1 x AC power plug.Network adapter speed: 1000 Mbps.Compatible networks: 10/100/1000 Mbps.Card type: Low profile, Chipset ID: Realtek RTL8111E, Auto MDIX, full duplex support, Supported protocols: CSMA/CD.Connector type: 1 x PCI Express x1, Bus type: PCI Express, External ports: 1 x RJ-45.Optimize network traffic with support for advanced features such as Jumbo Frames and VLAN tagging.Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab.Saves the time of having to adjust the mounting bracket, with a pre-configured half-height/low-profile bracket.LED indicators: 1 x Gigabit Detect (Yellow), 1 x Link/Activity (Green).Versatile Gigabit NIC/Server Adapter offers effective network performance.Environmental: Humidity 10% approx. 90% RH, Operating temperature: 0 to 70 deg C (32 to 158 deg F), Storage temperature: 0 to 100 deg C (32 to 212 deg F).System and cable requirements: Available PCI Express expansion card slot.OS Compatibility: Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, Windows® Server 2008 R2, 2003(32/64), Mac OS X (Intel based, tested up to 10.8), Linux, Physical Characteristics.Includes 1 x Gigabit Ethernet PCI Express Card, 1 x Standard Profile Bracket, 1 x Driver CD, 1 x Instruction Manual.Platform supported: PC.Warranty: 2 years limited.Startech Gigabit Ethernet card comes pre-configured with a low-profile/half-height installation bracket and has thickness of 700 mil.

Intel® Ethernet server adapter consists of data link protocols such as 10MB LAN, 100MB LAN and gigabit LAN. Adapter supports twisted pair media type and has audio video bridging with power management technologies..Network adapter interface: PCI express x1.Adapter represents the next step in the Gigabit Ethernet networking evolution for the enterprise and data center, offering audio video bridging.Dimensions: 2.6"(H) x 0.7"(W).Ports: Single port, Card height: Low-profile, full-height, Connector and cable: RJ-45 copper, Cable type: Category-3, category-5, category-5e up to 100 m.Media and performance: Category 5e twisted pair.Network and communication: 10/100/1000base-T.Device supported: PC, Mac.Form factor: Plug-in card.Ethernet controller: Intel Ethernet controller I210.Package includes: Ethernet server adapter I210, low-profile bracket.Standards and certificates: FCC B, UL CE, VCCI, BSMI, CTick, KCC, IEEE standards: 802.1Qav, 802.1Qat, 802.1AS, 802.3, 802.3u, 802.3x, 802.3z, 802.3ab, 802.3az.Warranty: Lifetime.Intel® Ethernet server adapter is a plug in card which has 10/100/1000Base-T network technology and efficiently manages packets with minimum latency.

1-Port 2.5GbE M.2 2280 Network Card, Multi-Gigabit Speeds (2.5G/1G/100M/10M), NBASE-T (802.3bz) NIC, M.2 B+M Key, PCIe Ethernet Interface, For SFF/Desktop PCs.High-performance M.2 Ethernet 2.5Gbps network card with Intel I225-V-chip; Multi-gigabit; Leverage existing Cat5e/Cat6 cabling (or better); NBASE-T (802.3bz); PCI Express M2 2280 B or M key compatible.M.2 2280 form factor is ideal for upgrading systems that do not have PCIe expansion slots or where slots are already in use; Includes 2ft (60cm) M/F Cat6 cable adapter for running Ethernet port to full/low-profile bracket on the rear of the PC.2.5GBASE-T variable speed options (2.5/1Gbps and 100/10Mbps) with auto-negotiation; Supports B or M key M.2 PCIe Gen 2 slots; Network interface card for PC is compatible with Windows/VMware/Linux; Full and low profile bracket included.Intel vPro® for remote management and troubleshooting; PXE boot enabled for faster deployment/updates; 9K jumbo frame for reduced packet overhead; Remotely boot a system using WoL; VLAN support for efficient network management.Designed and built for IT Professionals, this 2.5 GbE M.2 NIC is backed for two years, including free lifetime 24/5 multi-lingual technical assistance.This Ethernet card supports the following advanced features: PXE Boot, Wake-on-Lan (WoL), VLAN tagging, 9K jumbo frame, half-duplex, auto-negotiation, and Error Correcting Memory (ECC) for optimal network functionality..This 2.5 GbE M.2 Network Interface Card (NIC) features an Intel I225-V chipset with Intel vPro® technology, for enhanced performance and data integrity. Variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support of new and legacy network hardware. Leverage existing Cat5e or CAT6 cabling infrastructure while adding 2.5GBASE-T (802.3bz) compatibility for seamless integration.