Gigabit LAN Cards
97 results
This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.This 250 MB/s bandwidth PCI Express adapter ensures easy connectivity and plug-in form-factor for affordable and reliable Ethernet network.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable.Up to 8 DECT cordless handsets
Allied Telesis™ Gigabit ethernet card is featured with jumbo frames to send large packets and these packets are normally up to 9000 bytes long. Gigabit ethernet is featured with PCIe x1 bus to enable maximum throughput..Flow control, ACPI support, auto-negotiation, load balancing, VLAN support, full duplex mode, jumbo Frames support.Data transfer rate: 1 Gbps.Host interface: PCI Express x1.Dimensions: 2.7"(H) x 3.6"(W).Form factor: Plug-in card.Wavelength: 850 nm.Max transfer distance (Optical): 720'.Status indicators: Link activity, link OK.Card height: Full-height, low-profile.Optical sensitivity: -17 dBm.Output optical power: -9.5/-1.5 dBm.Multi-mode fiber.VLAN support.jumbo frames.Weight: 2.08 oz..Allied Telesis™ Gigabit ethernet card is used to boost the speed of the network and is limited to a maximum size of 1548 byte.
Enjoy the super fast Gigabit Ethernet connection by inserting this Gigabit Ethernet card into your computer.Enjoy superfast data transfer of up to 250 MB/s with PCI Express card, between the network card and motherboards.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.Dual-port Gigabit Ethernet, PoE support
Enjoy the super fast Gigabit Ethernet connection by inserting this Gigabit Ethernet card into your computer..Simply plug into any USB port and have an instant networking solution for your computer.Add your computer to your home or office network with this single port gigabit ethernet card conveniently.With the 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over the twisted pair cable
This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.For super-fast data transfer between your network and computer, the adapter takes advantage of the USB 3.0 connectivity.Connect to a wired network with this single port network adapter for a hassle-free and quick response
The StarTech ST1000SPEXI gigabit Ethernet network card features gigabit Ethernet PCI Express x4 interface card with single RJ-45 port. The RJ-45 port is fully compatible with IEEE 802.3/U/AB standards and offers maximum throughput up to 1000 Mbps auto-negotiation. Advanced features such as jumbo frames, wake-on LAN, auto MDIX and VLAN tagging for optimizing network traffic. Network card is ideal for many business applications requiring upgrades to servers or workstations, adding feature-rich gigabit networking..Gigabit Ethernet network card is suitable for use with PC.Powerline adapter speed: 2000 Mbps.Features 10/100/1000base-T RJ-45 connector.Dimensions: 0.7"H x 2.6"W x 4.7"L.Power consumption: 0.8 W.Meets RoHS, Green compliant certification and standards.PCI Express host interface is for better performance.Form factor: Plug-in card.Supports twisted pair for transmission of both analog and digital signals.Intel I210-AT chipset allows interface card to be compatible with different operating systems.Includes 1-port network card, low profile bracket and instruction manual.Weight: 1.2 oz..Comes with 2 years warranty.The StarTech 2000 Mbps gigabit Ethernet network card is based on Intel I210-AT chipset, that makes it compatible with Windows and Linux operating systems.
The StarTech ST4000SPEXI 2000 Mbps Gigabit Ethernet network card is compatible with Windows 10, 8 / 8.1, 7, Windows Server 2012, 2008 R2, Linux 2.4.x and later OS. It supports twisted pair cable, Linux/PC platform, Intel I350-AM4 chipset, jumbo frames up to 9K. This network card installs easily into a broad range of computer/server chassis, regardless of form factor..Network card helps to add more network ports to a workstation or server for redundancy or virtualization.Offers 20000 Mbps speed for fast, high-bandwidth connectivity.Supports four PCI Express x4 and four RJ-45 ports for good connectivity.Dimensions: 4.7"H x 0.7"W x 5.2"L.Installs easily into a broad range of computer/server chassis, regardless of form factor.Power: 4.4 W.Meets RoHS, FCC, CE compliant certification or standards.Form factor: Plug-in card.Supports twisted pair media type, Linux/PC platform, Intel I350-AM4 chipset, jumbo frames upto 9K.Compatible with Windows 10, 8 / 8.1, 7, Windows Server 2012, 2008 R2, Linux 2.4.x and later OS.LED indicators: 4 x 100/1000 Mbps, 4 x link/activity, Network technology: 10/100/1000Base-T.Environmental conditions: 41 - 122 deg F operating temperature, -4 - 140 deg F storage temperature, 20 - 80% RH humidity.Offers PXE network boot, auto MDIX and negotiation support, wake-on-LAN support, full or low-profile installation and full duplex support.Includes low-profile bracket and instruction manual.Weight: 3.4 oz..Comes with 2 years warranty.The StarTech 2000 Mbps Gigabit Ethernet network card adds more network ports to a workstation or server for redundancy or virtualization.
The Allied Telesis™ 2911 Series AT-2911SX/ST-901 1000SX ST PCI Express x1 Gigabit network adapter is compatible with Windows 10/8/7/Vista/XP/Server 2008 R2/Server 2008/Server 2003 64- or 32-bit, Server 2012 R2 64-bit/Server 2012, 64-bit and Linux 2.6. It includes 1000SX/ST connector. It has -17 dBm optical sensitivity, -9.5/-4 dBm optical power output and 850 nm wavelength. It features various status indicators such as LED On for link up, LED Off for link down and blinking for activity indication. It consumes 1.51 to 2.42 W power and requires signaling voltage of 3.3 V. It supports 1000Base-SX network technology..Gigabit network adapter delivers faster, more efficient processing of network traffic.Dimension: 3.5" x 2.7".Bus type: PCIE.Bus width: PCIEx1.Interface type and connectors: 1000SX/ST connector, Optical sensitivity: -17 dBm, Output optical power: -9.5/-4 dBm, Wavelength: 850 nm.Compatible OS: Windows 10/8/7/Vista/XP/Server 2008 R2/Server 2008/Server 2003 64- or 32-bit, Server 2012 R2 64-bit/Server 2012, 64-bit, Linux 2.6.Ethernet: IEEE 802.1p Quality of Service, IEEE 802.1Q VLANs, IEEE 802.2 LLC, IEEE 802.3ac MAC, IEEE 802.3az Energy-Efficient Ethernet.Status indicators: LED On: Link up, Off: Link down, Blinking: Activity.Media type supported: Optical fiber.Number of ports: 1, Power: Power consumption: 1.51 to 2.42 W (varies by model), Signaling voltage: 3.3 V.Network technology: 1000Base-SX.Form factor: Plug-in card.Meets RoHS, UL, FCC/EN55022 Class A, TUV, EN55024, CE, C-TICK, VCCI, IEEE 802.3ae, IEEE 802.3ad, IEEE 802.1Q, IEEE 802.1p certifications and standards.Weight: 0.13 lb
The Allied Telesis 2911 series AT-2911SX/SC 1000SX network adapter has PCI Express x1 host interface, one SC port and RJ-45 port for connectivity. It is compatible with PC. This adapter measures 2.7" x 3.6". It has link activity and link OK status indicators. This adapter has ACPI support, auto-negotiation, flow control, full duplex mode, jumbo frames support, load balancing and VLAN support. It comes with full-height bracket and low-profile bracket. The Gigabit Ethernet adapter offers data transfer rate of 1 Gb/s..Network adapter interface: PCI Express x1.Network adapter speed: 100 Mbps.Multi-mode fiber.Network adapter ports: 1 x SC.Network technology: 1000Base-SX.Form factor: Plug-in card.Connector type: SC.Cabling type: Ethernet 1000Base-SX.Connectivity technology: Wired.Data link protocol: Gigabit ethernet.Max transfer distance: 220 m.Network transport protocol: TCP/IP.Dimensions: 2.7"(H) x 3 1/2"(W).Weight: 0.13 lbs..Compliant standards: IEEE 802.1p.Allied Telesis Desktop fiber adapter offers high reliability, detailed tests, diagnostics and analysis. Supports network interface card for enhanced bandwidth and bus efficiency.
Add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x1 (or higher) slot in an IT Administrator workstation or server backplane, using StarTech this 1-Port SFP network controller. The network controller features an Intel I210 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a 1GbE SFP module to a PCI Express (PCIe) 2.1 x 1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps.Has one SFP slot.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I210 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slot for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.2-year manufacturer limited warranty
Intel I350-T2 chipset supports reliable and advanced network connectivity Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support..Type of Product/Use: Gigabit Ethernet Card for Server.Adapter Speed: Gigabit Ethernet.Number of ports and Type:2 RJ-45.Dimensions as H x W x D in inches: 0.79" x 5.43" x 4.72".Installation Info: Plug-in Card.Warranty: 1 Year.Features innovative power management including Energy Efficient Ethernet (EEE) and DMA Coalescing to increase efficiency and reduce power consumption.Fits both standard and low profile system chassis with the included spare low profile bracket.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Quickly adds two independent Gigabit Ethernet ports through an available PCI Express slot to server or desktop systems
This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity.The variable multi speed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware.Contains PCI Express, SATA power (15 pin), and RJ-45 (PoE+).Supports the IEEE 802.3af and IEEE 802.3at (Type 1 and Type 2) standards for Power Sourcing Equipment (PSE) and can deliver up to 48V DC and 25.5W of power to compliant Powered Devices (PD).Leverages Intel vPro technology for remote management and troubleshooting capabilities. Improve bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and the streaming of online content.Access up to 2.5GBASE-T speeds using Cat5e (or better) cabling, to maximize existing networks and equipment.Connect Power over Ethernet enabled IP cameras, phones, or Wireless Access Points.Provide power to remote powered devices that require a PoE power source.Add multi-gigabit connectivity to a desktop or server.Compatible with Windows 10, 11; Windows Server 2019, 2022; Linux 5.8.x and up.Box contains: network card, low-profile bracket, quick start guide.2-year manufacturer limited warranty.This card supports the following advanced features: PXE Boot, WoL, VLAN tagging, 9 K jumbo frame, full-duplex, and Intel vPro technology..This 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration.
2.5GbE USB A to Ethernet Adapter - NBASE-T NIC - USB 3.0 Type A 2.5 GbE /1 GbE Multi Speed Gigabit Network - USB 3.1 Laptop to RJ45/LAN - Lenovo X1 Carbon, HP EliteBook/ ZBook (US2GA30).COMPATIBILITY: Supports many OS and Hypervisors incl. Windows 7/8.1/10, Windows Server 2008 R2/2012 R2/2016, Linux LTS Kernel 4.19+, MacOS 10.11 to 11.HIGH PERFORMANCE: 2.5GbE USB A to Ethernet Adapter allows you to securely connect to high-speed Networks and is backwards compatible with existing Gigabit LANs.MAXIMUM BANDWIDTH: Leverage NBASE-T w/ USB-A for 2.5 Gb/s speeds over existing Cat 5e Cables w/o the expense of Cat 6A or Fiber; 3 Speed Auto-Negotiation always provides max bandwidth.NBASE-T & 2.5GBASE-T: USB 3.1 Ethernet adapter offers bandwidth for content creators & power users on high performance Laptops/Workstations incl. Lenovo ThinkPad X1 Carbon Dell XPS HP EliteBook/ZBook.USB 3.0/3.1 Type-A | 1x RJ45 | 5 Gbps Multi-Gigabit | 3 Speed 2.5G/1G/100 Mbps auto-negotiation | Realtek RTL8156 | NBASE-T/2.5GBASE-T | 9K Jumbo Frame | WoL | VLAN | USB Powered | 2Yr Warranty.USB LAN Adapter | IEEE 802.3bz | 2.5 Gbps | Mac | Windows® | Linux
Intel I350-T2 chipset supports reliable and advanced network connectivity Compliant with IEEE 802.3, 802.3u, 802.3ab with full duplex and Wake-on-LAN support..Type of Product/Use: Gigabit Ethernet Card for Server.Adapter Speed: Gigabit Ethernet.Number of ports and Type:2 RJ-45.Dimensions as H x W x D in inches: 0.79" x 5.43" x 4.72".Installation Info: Plug-in Card.Warranty: 1 Year.Features innovative power management including Energy Efficient Ethernet (EEE) and DMA Coalescing to increase efficiency and reduce power consumption.Fits both standard and low profile system chassis with the included spare low profile bracket.⚠ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Quickly adds two independent Gigabit Ethernet ports through an available PCI Express slot to server or desktop systems
Running low on expansion slots? Merge USB 3.0 and GbE into a single PCIe combo card - 3 Port PCI Express USB 3.0 Card + Gigabit Ethernet - Installation flexibility to fit standard & low-profile PCs - Frees up a PCIe slot by consolidating 3x USB 3.0 & 1x Gigabit Ethernet into a single card - UASP Support - Optional SATA Power - Save money and connect existing devices with USB 2.0 and 1.x backward compatibility - USB 3 with Network Adapter Card.Frees up a PCIe slot by consolidating 3x USB 3.0 & 1x Gigabit Ethernet ports into a single card.Provides installation flexability for standard and low-profile computers, with a dual-profile design.Lets you save money and connect your existing devices with USB 2.0 and 1.x backward compatibility.Perfect for high-powered USB devices, with optional SATA power providing up to 900mA per port.PCIe x1 interface, compliant with PCI Express 2.0 specifications.Supports Wake-On-LAN, Energy-Efficient Ethernet, jumbo frames, full duplex flow control, VLAN tagging, and layer 2 priority encoding
The StarTech ST1000SPEX43 4-port PCIe Gigabit network adapter card offers 4-channel networking and a maximum throughput of up to 1000 Mbps in each direction. It features the Realtek RTL8111G chipset for reliable network connections to your server or computer. This adapter supports full-duplex flow control, auto negotiation with next-page capacity, up to 9K jumbo frame, IEEE 802.1Q VLAN tagging, IEEE 802.1P layer 2 priority encoding, wake-on-LAN and remote wake-up. It is great for many SMB and enterprise applications such as virtualized environments that require multiple NICs..Network adapter card offers simultaneous access to multiple networks for desktop PC clients, servers and workstations.Dimensions: 0.7"H x 4.7"W x 5.4"D.Comes in yellow color.Interface/ports: one PCI express x four male, four RJ-45 female (external).Data transfer rate: 2000 Mbps (full duplex), Jumbo frame support: 9K max.Chipset ID: Realtek RTL8111G, Industry standards: Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab.Compatibility with Windows 10 (32/64), 8, 8.1, 7, Vista, XP, 2000, ME, 98SE, Windows Server 2012, 2003, Linux Kernel 2.4.x and up operating system.LED indicators: four link and four activity.System and cable requirements: Available PCI Express x4 or higher (x8, x16) slot.Temperature: 0 - 55 deg C (operating), -40 - 70 deg C (storage), Humidity: 5 - 95% RH.Contains one PCIe gigabit network card.Meets CE, FCC and RoHS certifications and standards.Weight: 3.5 oz..Comes with 2 years warranty
This 4-port RJ45 1Gbps OCP 3.0 Network Interface Card (NIC) features an Intel® i350-AM4 Ethernet Controller, enhancing performance and data integrity. The Ethernet card adheres to OCP 3.0 standards and ensures broad compatibility, making it an ideal solution for reliable network connectivity and robust data transfer capabilities. Optimized Network Efficiency Leverage existing Cat5e/Cat6 cabling (or better) up to 100m to maximize existing networks and equipment. The NIC supports variable speed options (10/100/1000 Mbps) with auto-negotiation and 9K jumbo frames to reduce packet overhead, reducing network slowdowns..4-Port RJ45 Gigabit OCP 3.0 Server Network Card, 1 Gbps.Maximum Data Transfer Rate 1Gbps.Number of ports 4.OS Compatibility Windows Server 2012, 2012 R2, 2016, 2019, 2022, 11, 10 VMware ESXi 7.x Linux 2.4.x and up - LTS Versions only.Chipset Model I350-AM4.Media Type Supported Twisted Pair.Form Factor: Plug-in Card.Limited Warranty 2 Year
This quad-port 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity across four 2.5G ethernet connections. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..Network controller to add a up to four 2.5GbE ports to a PCI Express (PCIe) 2.0 (or higher) slot in your workstation.Has a four RJ-45 ports.Compatible with Windows, Windows Server, VMware, and Linux systems.Meets or exceeds WEEE standards.Leverages Intel vPro technology for remote management and troubleshooting capabilities.Intel I225-V chipset allows for improved bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and streaming of online content, while reducing network slowdowns.Card ships in a standard-profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty
Plug this handy Ethernet adapter into a laptop to access a wired network at home or in the office. This compact NIC supports 1000 Mbps Ethernet while allowing the continued use of a pass-through USB 3.0 port at speeds of up to 5 Gbps. Featuring USB 2.0 backwards compatibility and offload engine support, this StarTech USB 3.0 to Gigabit Ethernet adapter is well suited to multigenerational setups and shared work spaces..USB 3.0 to Gigabit Ethernet adapter NIC with USB pass-through port.Network adapter speed: 2Gbps.USB 3.0, RJ45.Dimensions: 0.7"H x 1.4"W x 5"D.USB-powered.Meets or exceeds RoHS, CE, FCC, WEEE standards.Ideal replacement LAN adapter or laptop accessory, this compact USB 3.0 NIC leverages the 5Gbps speed of USB 3.0 to provide full Gigabit bandwidth.2-year manufacturer limited warranty.Max distance : 330', Enclosure type: Plastic.LED indicators: 1 x 10/100 Link/Activity (Green), 1 x Gigabit Link/Activity (Amber), Power adapter included: USB powered.Full Gigabit bandwidth support through a USB 3.0 host connection, conserve available USB 3.0 ports with USB pass through, take the adapter anywhere with a portable, USB powered design.Environmental: Humidity: 5 approx85% RH, Operating temperature 0 to 50 deg C (32 to 122 deg F), Storage temperature: -20 to 60 deg C (-4 to 140 deg F).System and cable requirements: USB port.OS compatibility: Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), Windows® Server 2008 R2, 2003(32/64), Mac OS 10.6 - 10.8, Linux Kernel 2.6.14 - 3.5.0.Includes 1 x USB 3.0 Network Adapter, 1 x Driver CD, 1 x Instruction Manual.Platform supported: PC, Mac.Certifications & standards: CE, FCC, IEEE Standards: 802.3i, 802.3u, 802.3ab, 802.3az.Dimensions: 0.7"(H) x 1.4"(W) x 3.2"(D), Weight : 1.80 lbs..Warranty: 2 years limited.Enjoy lightning-fast networking with this StarTech USB 3.0 to Gigabit Ethernet adapter NIC.
StarTech.com® 2 Port network card provides redundant connectivity to ensure an uninterrupted network connection and includes RJ-45 interface. Network card is fully compatible with IEEE 802.3/u/ab standards for 10/100/1000 Mbps auto-negotiation..Network adapter interface: PCI express x 4.Network adapter speed: 2000 Mbps, 1000Mbps.Full duplex capability, wake on LAN, auto-uplink, jumbo frames support, teaming support, large send offload, TCP segmentation offload, tagged VLAN, checksum offload support.Network adapter ports: 2 x RJ-45.Media type supported: Twisted pair.Controller processor: Intel I350-AM2.Network technology: 10/100/1000Base-T.System requirements: Windows 8.1 (32/64bit), 8 (32/64), 7 (32/64), vista(32/64), XP(32/64) Windows Server 2012, 2008 R2, 2003(32/64) Linux 2.4.x/ 2.6.x.Cabling technology: 10/100/1000Base-TX Ethernet.Data link protocols: 10MB LAN, 100MB LAN, Gigabit LAN, network / transport protocols: TCP/IP, UDP/IP.Form factor: Plug-in card, chipset ID: Intel - I350-AM2.Connectivity technology: Wired, Port style: Integrated on card, LED indicators: Link/activity.Compatibility: PC.Dimensions: 4.8"(H) x 0.7"(W) x 2.6"(D).Operating temperature: 32 - 122 deg F, storage: -4 - +140 deg F, humidity: 5 - 85% RH.Cable requirements: Available PCI express x4 or higher (x8, x16) slot, supported protocols: IEEE 802.3ad (link aggregation), IEEE 1588 (time sync) / 802.1AS, IEEE 802.1q (VLAN tagging), auto MDIX and full duplex support.Includes 2-port network card, 1 x low profile bracket, 1 x driver CD, 1 x instruction manual.Complaints and standards: FCC, CE, IEEE 802.1q/AS, IEEE 1588, IEEE 802.3/u/ab/ad, PCI express base specification 2.1, RoHS, green compliance.Weight: 2.8 oz..Warranty: 2 years limited.StarTech.com® 2 Port network card is ideal for VM environments with multiple operating systems, requiring shared or dedicated NICs and supports twisted pair media.
Intel provides data centers worldwide with innovative Ethernet components and solutions that are extensively tested for network interoperability, reliability, and performance. Intel Ethernet controllers, adapters and accessories deliver speeds from 1 to 100GbE - with versatile capabilities to optimize workload performance..Intel X710 Ethernet adapter delivers high speeds and versatile capabilities to optimize workload performance.Data rate per port: 10GbE/5GbE/2.5GbE/1GbE/100Mb.Equipped with four Ethernet ports.Compatible with motherboards equipped PCIe x8 system interface.Features: On-chip QoS and Traffic Management, Flexible Port Partitioning, Virtual Machine Device Queues (VMDq), PCI-SIG SR-IOV Capable, Intel Data Direct I/O Technology, Intelligent Offloads, Storage Over Ethernet (iSCSI, NFS).Cabling type: RJ45 CAT-6, CAT-6a, CAT-5e up to 328'.5-year manufacturer limited warranty
The AT-2911 Series Gigabit Ethernet Network Adapters are integrated Ethernet network interface cards based on Broadcom's BCM5718 chipset with a PCI Express (PCIe) x1 version 2 interface. The AT-2911 series adapter connects a PCIe compliant computer to a Gigabit Ethernet network. Allied Telesis offers models equipped with a single port interface or dual port interface in the AT-2911 series. The AT-2911 adapter is equipped with single or dual fiber optic connector, copper connector, SFP slot, or a combination of these connectors..This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.Enjoy superfast data transfer of up to 250 MB/s with PCI Express x1 card, between the network card and motherboards.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable
Add up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in an IT Administrator workstation or server backplane, using this 2-Port SFP Network Controller. The network controller features an Intel I350 chip known for its reliability and high-performance capabilities, offering low-latency and low CPU utilization, ensuring smooth and efficient network data transfer, which is critical for business applications and services. Support for VMDq, SR-IOV, and Intel® VT-c technologies allow for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities. The PCIe network card supports PXE boot, enabling centralized operating system deployment and updates. It also features 9K jumbo frame support, reducing packet overhead for improved data transmission efficiency. VLAN tagging support allows for efficient network management and segmentation..Network controller to add a up to two 1GbE SFP modules to a PCI Express (PCIe) 2.0 x1 (or higher) slot in your workstation.Provides Ethernet speeds up to 1Gbps per port.Has two SFP slots.Compatible with both MSA-compliant and branded 1GB SFP modules, as well as direct attach copper cables (DACC).Meets or exceeds WEEE standards.Intel I310 chip offers low latency and low CPU utilization and ensures smooth and efficient network data transfer, which is critical for business applications and services.Support for VMDq, SR-IOV, and Intel VT-c technologies allows for enhanced virtual machine performance, reduced CPU overhead, and improved network virtualization capabilities.SFP slots for interchangeable SFP modules allows selecting fiber transceiver modules that best suit the network needs of the application, based on the distance and connector type.Full-profile bracket are installed by default, with a low-profile bracket included.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty
The Allied Telesis Gigabit Ethernet card supports data transfer of up to 250Mbps with PCI Express card and 1000Mbps using 1000Base-X technology. This card facilitates optical fiber cable to span longer distances and excellent data transfer rate between servers and network components..Enjoy superfast data transfer of up to 250 MB/s with PCI Express card, between the network card and motherboards.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable
StarTech.com® PCI Express gigabit ethernet fiber network card has a dual profile design and includes low profile/half height bracket for easy installation. Card is compatible with Windows 8, 8.1, 7, Vista, XP, Mac OS 10.5, Linux 2.6.x and 3.5.0 OS..1x PCI express x1, 1x SFP slot female.4.6"(H) x 0.7"(W) x 5"(D).Windows 8/8.1 (32/64bit)/7 (32/64)/Vista (32/64)/XP (32/64), Windows Server 2012/2008 R2/2003, Mac OS 10.5 and up (Tested up to 10.9), Linux 2.4.x/2.6.x/3.5.0, Microsoft Hyper-V operating systems.Wired.Data transfer rate: 2 Gbps (full-duplex).Form factor: Plug-in card.Buffer size: 48KB.Power consumption: 3.2 W max.Chipset ID: Realtek RTL8168E, Marvell 88E1111B.LED indicators: Link (green), activity (yellow).Temperature: 0 - 45 deg C operating, -20 - 70 deg C storage, Humidity: 5 - 95% RH (non-condensing).Applications: Ideal for secure setups, perfect for remote embedded industrial monitoring systems, and high-speed video surveillance.Compatible with most Gigabit SFP modules.Supports full/half-duplex auto-negotiation, auto-MDI/MDIX.No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.Includes 1 Port PCI Express Gigabit SFP network card, low-profile bracket, driver CD, instruction manual.Certification and standards: CE, FCC, RoHS.Weight: 2 oz..Warranty: 2 years limited.StarTech.com® PCI Express gigabit ethernet fiber network card supports maximum data transfer rate of 2 Gb/s at full duplex mode and has a SFP female slot to ensure flexible network configuration.
This dual-port 2.5 GbE network interface card (NIC) features an Intel I225-V chipset with Intel vPro technology, to enhance performance and data integrity across two 2.5G ethernet connections. The variable multispeed options (2.5/1Gbps and 100/10Mbps) enable support for both new and legacy network hardware. Utilize existing Cat5e or CAT6 cabling infrastructure while adding NBASE-T (802.3bz) compatibility for seamless integration..Network controller to add a up to two 2.5GbE ports to a PCI Express (PCIe) 2.0 (or higher) slot in your workstation.Has a two RJ-45 ports.Compatible with Windows, Windows Server, VMware, and Linux systems.Meets or exceeds WEEE standards.Leverages Intel vPro technology for remote management and troubleshooting capabilities.Intel I225-V chipset allows for improved bandwidth for data-intensive applications, network sharing, FTPs, online or local storage/backup, and streaming of online content, while reducing network slowdowns.Card ships in a standard-profile bracket and includes a low-profile bracket for installation into small form factor systems and servers.PXE boot enabled for centralized OS deployment and updates.9K jumbo frame support for reduced packet overhead.VLAN tagging support for efficient network management.Features a built-in heat sink to keep the controller chip at optimal temperatures, ensuring sustained performance.2-year manufacturer limited warranty
10GBase-T PCIe Network Adapter with backward compatibility of 5/2.5/1G and 100Mbps; RJ45 port and built-in QoS Hyper-fast 10Gbps Networking - Enjoy up to 10X-faster data-transfer speeds for bandwidth-demanding tasks. Complete Compatibility - XG-C100C is compatible with current network standards, including 10/5/2.5/1Gbps and 100Mbps, for seamless backward compatibility. Compatible with Windows and Linux - Supports Windows 10 and Linux Kernel 4.4 for flexible OS integration. RJ45 Port for Easy Migration - Easily upgrade to 10Gbps networking using standard copper network cables. Prioritize Your Games - Built-in Quality-of-Service (QoS) technology lets you prioritize bandwidth and supported gaming packets for a smooth gaming experience..10Gigabit Ethernet card offers the flexibility and scalability to make infrastructure run as efficiently and productively as possible with 10Gigabit data transfer rate.Enjoy superfast data transfer of up to 2000 MB/s with PCI Express x4 card, between the network card and motherboards.This single port 10gigabit ethernet card enables you to connect your computer system to your existing network.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10GBase-T technology get up to 10Gbps data transfer rate over the twisted pair cable
The Comprehensive® USB31-RJ45 black USB 3.1 type-C male to RJ45 network adapter features 10/100/1000Mbps Gigabit Ethernet for high-speed connection and supports USB super speed modes. This USB powered network adapter works with PC and Mac. It is backward compatible with older USB computer systems..Black network adapter ensures reliable data communication.Interface: Connector type 1: USB C male, Connector type 2: RJ-45 female.RoHS Compliant.Performance grade: Great, Compatible networks: Half/full duplex 10/100/1000 Mbps operation.Device supported: PC and Mac.Jacket: PVC, Jacket color: Black.Delivers high speed connection for USB 3.1 Type-C peripherals as an Ethernet interface while integrating 10/100/1000 Mbps Gigabit Ethernet.Supports USB super speed modes and has plug-and-play compatibility.USB powered - no power supply needed for optimum performance.Weight: 0.3 lbs..Comes with 2 years warranty
The Intel Ethernet Network Adapter I226-T1 is ideally suited for personal computers and workstations used for enterprise, gaming, and home networks. These systems require more bandwidth than ever before. This ultra-compact, easy-to-integrate PCIe 3.1 x1 adapter, is a cost-effective networking solution for speeds up to 2.5GbE. The I226-T1 is also designed with a ventilated bracket, for increased efficiency and reduced power consumption..Ethernet Network Adapter.Maximum Data Transfer Rate: 2.50 Gbit/s.Network Technology: 2.5GBase-T.Form Factor: Plug-in Card.Bracket Height: Low Profile and Full Height.Device Supported: Computer/Workstation.Chipset Model: I226-LM.Host Interface: PCI Express 3.1 x1.Number of Network (RJ-45) Ports: 1
Features: Instantly Connect to a Gigabit Network on Your Laptop or Desktop Computer Tripp Lite's U436-06N-GB USB-C Network Adapter lets you instantly connect a USB-C or Thunderbolt 3 device to a Gigabit Ethernet network using a single Ethernet cable. This small-but-powerful adapter connects directly to your device's USB-C or Thunderbolt 3 port with no software, drivers or external power required. Simply plug it in, connect it to your network, and you're ready for action. With the reliability of a wired connection, you can transfer large amounts of data with confidence-or stream audio and video without fear of interruption. Enjoy Fast, Simple Connections Every Time Unlike traditional USB cables that can only be attached one way, the U436-06N-GB's reversible Type-C connector plugs into your device's USB-C or Thunderbolt 3 port in either direction. No more fumbling around with cables, trying to get the right connection. With plug-and-play installation, the user-friendly U436-06N-GB gets you up and running quickly with an instant USB network connection. It works with Windows, Mac and Chromium operating systems and is backward compatible with previous USB generations. Access True Gigabit Speeds Without an Ethernet Card This USB to LAN converter delivers full 10/100/1000 Mbps network speeds without requiring you to install an internal Ethernet card in your device. It's a convenient and affordable way to expand the potential of your PC, laptop or tablet. Take It with You Wherever You Go About the size of a credit card, the U436-06N-GB is small and lightweight enough to be taken with you wherever you go. Its ultra-compact design fits easily into a laptop bag, briefcase, or even your pocket..Provides instant access to Gigabit speeds without an internal Ethernet card.Simplified connections with a reversible Type-C connector that plugs into your device's port in any direction.Easy to install with plug-and play operation-no software or drivers required.Ultra-compact design for easy transport
Startech Gigabit Ethernet adapter in white color offers backward compatibility with USB 2.0 systems & support through a USB 3.0 host connection. Card features such as IPv4/IPv6 packet COE & TCP large send offload to reduce the load on your CPU..White.Network adapter interface: USB 3.0, RJ45.Network adapter speed: 5 Gbps, 2 Gbps.Compatible networks: 10/100/1000 Mbps.Chipset ID: ASIX - AX88179, VIA - VL811.Connector type: 1 x RJ-45 female, 1 x USB 3.0 A (9 pin; SuperSpeed) female, 1 x USB 3.0 A (9 pin; SuperSpeed) male.Performance: Auto MDIX: Yes, Compatible networks: 10/100/1000 Mbps, full duplex support.Industry standards: IEEE802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3az.Max distance : 330', Enclosure type: Plastic.LED indicators: 1 x 10/100 Link/Activity (Green), 1 x Gigabit Link/Activity (Amber), Power adapter included: USB powered.Full Gigabit bandwidth support through a USB 3.0 host connection, conserve available USB 3.0 ports with USB pass through, take the adapter anywhere with a portable, USB powered design.Environmental: Humidity: 5 approx 85% RH, Operating temperature 0 to 50 deg C (32 to 122 deg F), Storage temperature: -20 to 60 deg C (-4 to 140 deg F).System and cable requirements: USB port.OS compatibility: Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), Windows® Server 2008 R2, 2003(32/64), Mac OS 10.6 - 10.8, Linux Kernel 2.6.14 - 3.5.0.Includes 1 x USB 3.0 Network Adapter, 1 x Driver CD, 1 x Instruction Manual.Platform supported: PC, Mac.Certifications & standards: CE, FCC, IEEE Standards: 802.3i, 802.3u, 802.3ab, 802.3az.Dimensions: 0.7"(H) x 1.4"(W) x 3.2"(D), Weight : 1.80 lbs..Warranty: 2 years limited.Startech Gigabit Ethernet adapter in white color operates at maximum distance of 100 m / 330' and cable is of 6 1/10" in length.
Arm Your PC with the Latest 10G Speeds PCIe 3.0 Slot to 10 Gigabit Ethernet Network Adapter TX401 Upgrade to 10G Networking 10 Gigabit Ethernet reaches blazing-fast data rates up to 10 billion bits per second—10× faster than standard Gigabit Ethernet. It's a brand-new era for all your bandwidth-intensive tasks from local data transfers to internet access. 10 Gbps Internet Access Make Full Use of Your High-Speed Internet Access 10 Gbps NAS Connection Lightning-Fast Local Data Transmissions 10 Gbps Host Server Building High Hardware Configuration for a Powerful Server Play Never Ends with 10G With 10 Gbps internet access, your gaming will be fully optimized with a large boost in speed, latency, and responsiveness. Large-sized game downloads, seamless live streaming, and massive data backups via the cloud are as easy as choosing your character..Features a PCI Express interface and supports 10 Gigabit Ethernet speeds for high-performance networking..has a maximum data transfer rate of 10,000 Mbps..Equipped with 1 Ethernet LAN (RJ-45) port for network connectivity..compatible with a variety of products and systems, including: Operating Systems: Windows 11, 10, 8.1, 8, 7, Windows Server 2022, 2019, 2016, 2012 R2, and Linux.Certified by : Restriction of Hazardous Substances (RoHS).Comes with a 2 Year Limited warranty.
The SGFEB provides a cost effective method for integrating 1000Base-SX/LX fiber into a 10/100/1000Base-T copper environment. Deploying fiber into today's networks provides the ability to transmit data over significantly longer distances than is possible on copper. Fiber also protects your data from external sources of noise and interference, improving network performance..Meet the multiple network connectivity needs of today's network environment with this 2 transceiver/media converter.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over optical fiber cable
StarTech.com® Gigabit network server adapter NIC card features PCI Express x1 interface and offers network speed of up to 1000 Mbps. Card with link/activity LED indicators supports jumbo frames, wake-on-LAN and auto MDIx features..1 x Network.Twisted Pair.Full-height, Low-profile.Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3x and IEEE 802.3ab standards.Processor: 1 x RTL8111E - Realtek semiconductor.Platform supported: PC, Mac.Server adapter offers performance flexibility and easy setup with support for advanced features such as Jumbo Frames, Wake-On-LAN and Auto MDIX.Includes both full profile and low profile/half-height installation brackets for installation in a wide range of computer/server chassis, regardless of form factor.Connectivity technology: Wired.Operating systems: Windows 2000/ XP (32/64-bit)/ Server 2003 (32/64-bit)/ Server 2008 R2/ Vista (32/64-bit)/ 7 (32/64-bit)/ 8 (32/64-bit)Mac OS X (Intel based, tested up to 10.8), Linux.Operating humidity: 10 percent ... to 90 percent ... RH.Operating Temperature: 0 to 70 deg C.Supported protocols: CSMA/CD.Network technology: 10/100/1000Base-T.Form factor: Plug-in card.Green compliance: RoHs.Dimensions: 2.7"(H) x 4.7"(W) x 0.7"(D); Weight: 1.4 oz..Warranty: 2 years limited.Startech.Com® ST1000SPEX2 Gigabit Network Server Adapter NIC Card offers performance flexibility and easy setup with support for advanced features such as Jumbo Frames, Wake-On-LAN and Auto MDIX.
The StarTech USB 3.0 to Gigabit network adapter offers fast, reliable network access for your MacBook, Chromebook or tablet. It supports Windows, Mac and Chrome OS and feature sleek aluminum design with silver finish. You can quickly access very large files over a Gigabit network, saving valuable time every day. The Realtek RTL8153 chipset ensures reliable performance and offers up to 9K jumbo frame support. This USB31000SA network adapter adds a single RJ45 Ethernet port to your computer through your USB 3.0 port..Gigabit network adapter is perfect for office or home use.Dimensions: 0.7 degree H x 1 degree W x 2.6 degree D.Compatible with PC.Aluminum housing with silver finish, the network adapter is the perfect companion for your MacBook, Chromebook or Tablet.System requirements: Windows 10/8.1/8/7/Vista/XP, 98SE, Server 2012, 2008 R2, Mac 10.6 - 10.11, Linux Kernel 2.6.25 - 3.17.0, Google Chrome , PC.Has one 9-pin Type A male USB 3.0, one female RJ-45 connector.Chipset ID: Realtek RTL8153, Network technology: 10/100/1000 Mbps, Jumbo frame support: 9K max., Max. distance: 330'.Maximum data transfer rate: 2 Gbps, Full duplex support, Auto MDIX, Form factor: Attached cable/desktop.LED indicators: 1 x power - blue, 1 x link - green, 1 x activity - amber.USB 3.0 to Gigabit network adapter provides a single RJ45 Ethernet port to computer through USB 3.0 port.Network adapter supports full Gigabit bandwidth by harnessing the performance of 5 Gbps speed USB 3.0.Access large files over a Gigabit network, saving valuable time every day, realtek chipset gives the assurance of reliable performance.Network adapter chipset offers native driver support, so you don't have to worry about installing additional software.Temperature: 0 to 70 deg C operating, -55 to 125 deg C storage, Humidity: 20 to 90%.Contains one USB 3.0 Gigabit NIC, one quick install guide.Meets CE, FCC, RoHS, C-Tick certifications and standards.Weight: 1.3 oz..Comes with 2 years warranty
The StarTech.com® US1GC30A USB-C to Gigabit network adapter adds a Gigabit Ethernet network connection to your computer through the USB-C port. It features sleek silver finish that compliments your MacBook, laptop or Chromebook with similar color finish. You can increase Gigabit Ethernet capabilities of your laptop or desktop computer without opening the computer or taking up an available expansion slot. It delivers reliable network connections without need of any drivers. It is compatible with Thunderbolt™ 3 ports. Simply plug the adapter into the USB-C port on your laptop and connect to your network. It offers native driver support in Chrome OS™, Mac OS 10.10 and Windows® 8.1..Network adapter adds a Gigabit Ethernet network connection to your computer.Dimensions: 0.7"H x 0.9"W x 2.6"D.Compatible with Windows 7, 8, 8.1, 10,Windows Server 2008 R2, 2012, Mac OS X 10.9 to 10.10, Linux 3.5 to 4.4.x LTS version only.Color: Silver.Maximum data transfer rate: 5 Gbps.Industry standard: IEEE 802.3, 802.3u and 802.3ab.Ports: One USB 3.0 type-C (24-pin) male, one RJ45 female.Network technology: 10/100/1000Base-T.Chipset ID: Realtek RTL8153.Powered directly from the USB port.Thunderbolt 3 port compatible.Up to 9K jumbo frame support.Sleek silver finish looks great with your MacBook and any laptop or Chromebook with similar color finish.Operating temperature: 0 - 70 deg C, Storage temperature: -55 - 125 deg C.WEEE and RoHS Compliant.Weight: 1.2 oz..Comes with 2 years warranty
This compact USB 3.0.0 network adapter is backward compatible with older USB 2.0.0/1.x computer systems, making it the ideal portable replacement network adapter. Adapter supports features such as Jumbo Frames, VLAN tagging and Wake on LAN (WOL)..1.Twisted Pair.Crossover detection and auto-correction (Auto MDIX).IEEE 802.3, 802.3u and 802.3ab (10BASE-T, 100BASE-TX, and 1000BASE-T) compatible.IEEE 802.1Q VLAN tagging support.Platform supported: PC, Mac.Supports checksum offload (IPv4, IPv6, TCP, UDP) and large send offload.Compact, lightweight design.Jumbo frame support.Activity and link LED indicators.Connectivity technology: Wired.Operating systems: Windows XP(32/64-bit)/ Server 2003(32/64-bit)/ Server 2008 R2/ Vista(32/64-bit)/ 7(32/64-bit)/ 8(32/64-bit)Mac OS 10.6/ 10.7/ 10.8.Humidity: < 80 percent ... RH.Operating Temperature: 0 to 40 deg C.USB -powered.Network technology: 10/100/1000Base-T.Form factor: External.Green compliance: RoHs.Dimensions: 0.6"(H) x 1"(W) x 8.3"(D); Weight: 1 oz.Warranty: 2 years limited.Startech.Com® USB31000SW White NIC Network Adapter Card adds a single RJ45 ethernet port to a USB-enabled computer system.
WatchGuard WG9020 Firebox M-Series 2-Port 10GbE SFP+ Expansion Module The WatchGuard Firebox M-Series 2-Port 10-Gigabit SFP+ Expansion Module allows you to add more interfaces to your M-Series Firebox appliance (sold separately). It is easily installed in the interface slot on your 3rd Gen Firebox (see specifications tab for compatibility)..WG9020 module have Single Mode for Fiber cable and LC (Lucent Connector) is for fiber connector..Network Transceiver is SFP+ Transceiver Module Used for 10 Gigabit Ethernet connectivity..The WG9020 module supports a data transfer rate of up to 10 Gbps, (10,000 Mbps), 10,000,000 Kbps (Kilobits per second) over optical fiber..This module supports a maximum distance of up to 10,000 meters when using single-mode fiber..The WG9020 module Supports 10 Gigabit Ethernet.Power Consumption for this module is 2.5 watts..This module is msa compliant..It supports MTBF 1,000,000 hours..The WG9020 module operates at a wavelength of 1310 nm.
The Rocstor Premium USB 3.0 to Ethernet adapter enables you to connect this adapter to your existing USB 3.0 (2.) port and gain a fast and reliable Gigabit Ethernet RUJ45 NIC adapter. Supporting up to Gigabit Ethernet data speeds, the adapter lets you enjoy faster streaming of online content. This versatile Ethernet adapter does not require any external power supply. You can easily connect the adapter to any available USB 3.0 (2.0 Compatible) port, then install the included software driver and connect a Cat5 cable from the adapter to an RJ45 Network port. Enjoy speeds of up to 1000Mbps file transfer between your device or host computer with the most reliable connection. Use this adapter with confidence with any of the newer computers that has no internal Ethernet port. Use this adapter with confidence, backed by Rocstor 2-year Limited Warranty..Enjoy the super fast Gigabit Ethernet connection by inserting this Gigabit Ethernet card into your computer.For super-fast data transfer between your network and computer, the adapter takes advantage of the USB 3.0 connectivity.Add your computer to your home or office network with this single port gigabit ethernet card conveniently.Supports cost-efficient twisted pair cables for speedy data transfer up to 100 meters.With the 10/100/1000Base-T technology get up to 1000Mbps data transfer rate over the twisted pair cable
Perle Media converter provide an economical path to extend the distance of an existing network. Media converter features full duplex capability, auto-negotiation and auto-uplink..Network adapter speed: 1 Gbps.Connect 10/100 devices to gigabit backbone.Operating temperature: 32 - 122 deg F, Operating humidity: 5 - 90%.Dimensions: 1"(H) x 3.1"(W) x 4.7"(D).Form factor: External, rack mountable.Data link protocol: Gigabit ethernet.Connectivity technology: Wired.Cabling type: 1000Base-T, 1000Base-X, 100Base-X.Extend network distances.Power consumption operational: 3 W.Auto negotiation, auto uplink (auto MDI/MDI-X), smart missing link (SML), half duplex mode, full duplex mode, jumbo frames support.Compliant st and ards: IEEE 802.3ab, IEEE 802.3x, CISPR 22 Class A, EN 60950, EN 61000-3-2, EN55024, EN55022 Class A, RoHS, UL 60950-1, WEEE, FCC Part 15 A, IEC 60825-1.Perle Media converter allows for more efficient troubleshooting and less on-site maintenance providing high performance.
USB C to Gigabit Ethernet Adapter w/USB A Port - White 1Gbps NIC USB 3.0/USB 3.1 Type C Network Adapter - 1GbE USB-C RJ45/LAN TB3 Compatible Windows MacBook Pro Chromebook (US1GC301AUW).DRIVERLESS PLUG-AND-PLAY: Quick setup and compatibility with Windows XP/7/8.1/10, Windows Server 2016, Linux LTS Kernel 3.14+, MacOS 10.11 to 10.15, Chrome OS, VMware ESXi 6.5/6.7/7.0.EXTRA USB 3.0/3.1 PORT: USB-C to Ethernet and USB Adapter adds a RJ45 Ethernet Port for wired LAN access and an additional open USB Type-A Port for connecting another peripheral device.SECURE WIRED CONNECTIVITY: Portable USB C to Gigabit Ethernet Adapter allows you to connect to GbE Network from USB-C/Thunderbolt 3 Laptop incl. MacBook/MacBook Pro, Surface/Surface Book, & Chromebook.THE STARTECH.COM ADVANTAGE: StarTech.com offers a 2-year warranty and free lifetime 24/5 multilingual technical support based in North America.USB-C or TB3 | 1x RJ45 | 1 x USB Type A Device Port | 1 Gbps Data Speed | 1000 / 100 / 10 Mbps Auto-Negotiation | Realtek RTL8153 | 9K Jumbo Frame | VLAN | WoL | Compact Design | USB Bus Powered.USB-C to Network Adapter | 10/100/1000Mbps | Thunderbolt™ 3 Compatible | RJ45
Convert and extend a Gigabit Ethernet connection up to 10km over single-mode SC fiber - Provides a cost-effective Ethernet copper to fiber or fiber to copper link - LFP mode on fiber/copper sides - Compact design and wall mountable with easy installation - SC connection (fiber) and RJ45 connection (copper) - Fiber to Ethernet Converter / Fiber to Copper Converter / Fiber optic media converter / Fiber to Ethernet Media Converter / Media converter fiber to Ethernet.Converts and extends a Gigabit fiber (1000 Mbps) network over single-mode fiber on 1000BASE-LX networks.Provides a cost-effective Ethernet to fiber/copper to fiber link.Supports a maximum distance of 10 km over single mode duplex fiber optic cable (SC connection).Compact design and wall mountable.Non-blocking full wire-speed forwarding rate.LED Indicators for simple Ethernet/fiber network link monitoring.1310 nm wavelength.Supports IEEE 802.1q Tag VLAN pass through.Convert and extend a Gigabit Ethernet connection up to 10 km over single-mode SC fiber
The StarTech.com ® US1GC301AU USB-C to Gigabit network adapter offers a reliable network connection without the need to install drivers. Its compact, lightweight design fits nicely into any carrying case for easy portability. It supports full Gigabit bandwidth by harnessing the performance of USB 3.1 Gen 1 and lets you access very large files over the network at Gigabit speeds. Plug-and-play installation provides for a hassle-free setup, and native driver support ensures quick driver installation..Network adapter adds an extra USB peripheral along with your network adapter.Dimensions: 0.7"H x 1.4"W x 10.8"D.Comes in black color and features plastic enclosure for added protection.Interface: Gigabit Ethernet 10/100/1000 Mbps.Ports: One 24-pin type-C USB 3.1 male, one 9-pin type-A USB 3.1 female and one RJ-45 latching female.USB-powered.Data transfer rate: 5 Gb/s.Compatible with Windows 8.1/8/7/Vista/XP (32/64-bit), Mac OS, Windows Server 2012, 2008 R2 and 2003.LEDs: One 10/100 link/activity (green), one gigabit link/activity (amber), Jumbo frame: 4K max.Network protocol and standards: IEEE 802.3, 802.3u and 802.3ab.Temperature: 0 - 50 deg C (operating), -10 - 60 deg C (storage), 5 - 80 percent RH operating humidity.Has built-in checksum and large send offload with compact, lightweight design for maximum portability.Contains network adapter.Meets CE, FCC, RoHS certifications and standards.Weight: 1.3 oz..Comes with 2 years warranty
The StarTech US1GC30 white 5 Gbps USB-C to Gigabit network adapter offers a reliable network connection without having to install any drivers. Its compact, lightweight design fits nicely into any carrying case that lets you carry it with you wherever you go. It supports full Gigabit bandwidth by harnessing the performance of USB 3.1 Gen 1 and lets you access large files over the network at Gigabit speeds. Plug-and-play installation helps for a hassle-free setup, and native driver support ensures quick setup..Network adapter adds a Gigabit Ethernet network connection to your computer through the latest USB 3.1 Gen 1 technology and USB type-C port.Dimensions: 0.6"H x 8.3"W x 1"D.Data transfer rate: 5 Gbps.Jumbo frame support: 9K.Interfaces/ports: 1 x USB 3.1 USB type-C (24 pin, Gen 1, 5 Gbps) male, 1 x RJ-45 female.Media type supported: Twisted pair.Network technology: 10/100/1000Base-T.Chipset: Realtek RTL8153.Weight: 0.8 oz..Operating system compatibility: Windows 10, 8.1, 8, 7, Vista, XP, Windows Server 2012, 2008 R2, 2003, Mac OS 10.6 -10.11, Linux Kernel 2.6.25 - 3.17.0.USB powered supply provides the necessary power.Environmental conditions: 0 - 70 deg C operating, -10 - 80 deg C storage, 5 - 90% RH humidity.Thunderbolt 3-port compatible, powered directly from the USB port, has built-in checksum and large send offload, wake-on-LAN support.Meets RoHS, FCC and CE certifications and standards.2 year warranty.The StarTech white 5 Gbps USB-C to Gigabit network adapter is compatible for use with desktop computers or notebooks.
Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance.Gigabit Ethernet port for ultra-fast network speeds.With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable
4XEM™ USB 3.0 to gigabit ethernet adapter supports 10/100/1000Base-T network technology. Adapter weighs about 0.95 oz and is compatible with all types of PCs..Network adapter interface: USB 3.0.Interfaces with USB 3.0.Dimensions: 2.6"(H) x 1"(W) x 1"(D).Ports: 1 x RJ-45 network port.Media and performance: Twisted pair cable.Network and communication: 10/100/1000base-T.Device supported: PC, Mac.Compatible with USB 3.0.USB 3.0 to gigabit ethernet NIC network adapter adds a single RJ-45 ethernet port to a USB-enabled computer system.Package includes: USB 3.0 to gigabit Ethernet NIC network adapter.Standards and certificates: CE, FCC, IEEE Standards: 802.1q, 802.3, 802.3i, 802.3u, 802.3ab, 802.3az, RoHS.Warranty: 3 years limited.4XEM™ USB 3.0 to gigabit ethernet adapter adds a single RJ45 ethernet port to a USB-enabled computer system and supports twisted pair media type.
Tripp Lite USB 3.0 to gigabit Ethernet adapter supports IPV4, IPV6 pack and has a checksum offload engine to reduce CPU loading. Adapter features both full-duplex, half-duplex operations and supports suspend mode, remote wakeup via link-up..Network adapter interface: USB 3.0.Connections: USB 3.0 Type B male to RJ-45 female.Dimensions: 0.6"(H) x 0.9"(W) x 2.6"(L).Media type supported: Twisted pair.Network technology: 10/100/1000Base-T.Thickness: 600 mil.Black.Supports IPv4 and IPv6 pack checksum offload engine ( COE ) to reduce CPU loading.Supports both full duplex and half duplex operations.Supports suspend mode and remote wakeup via link-up and magic packet.Powered by USB port - no external power adapter required.Environmental conditions: Operating temperature: 10 - 40 deg C.Device supported: PC.System requirements: PC, Mac.Includes U336-000-R USB 3.0 to Ethernet adapter, quick start guide, CD (driver and quick start guide).Certification and standards: CE, FCC, 802.3u/az.Weight: 0.06 lbs..Warranty: 1 year limited.Tripp Lite USB 3.0 to Gigabit Ethernet adapter is used to create a network port on a computer and is compatible with PC and Mac.
Startech Gigabit Ethernet card includes a standard profile bracket for installation in a wide range of computer/server chassis, regardless of form factor. Card adds a 10/100/1000 Mbps which is compatible with RJ45 Ethernet port..Network adapter interface: RJ45, 1 x AC power plug.Network adapter speed: 1000 Mbps.Compatible networks: 10/100/1000 Mbps.Card type: Low profile, Chipset ID: Realtek RTL8111E, Auto MDIX, full duplex support, Supported protocols: CSMA/CD.Connector type: 1 x PCI Express x1, Bus type: PCI Express, External ports: 1 x RJ-45.Optimize network traffic with support for advanced features such as Jumbo Frames and VLAN tagging.Industry standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab.Saves the time of having to adjust the mounting bracket, with a pre-configured half-height/low-profile bracket.LED indicators: 1 x Gigabit Detect (Yellow), 1 x Link/Activity (Green).Versatile Gigabit NIC/Server Adapter offers effective network performance.Environmental: Humidity 10% approx. 90% RH, Operating temperature: 0 to 70 deg C (32 to 158 deg F), Storage temperature: 0 to 100 deg C (32 to 212 deg F).System and cable requirements: Available PCI Express expansion card slot.OS Compatibility: Windows® 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), 2000, Windows® Server 2008 R2, 2003(32/64), Mac OS X (Intel based, tested up to 10.8), Linux, Physical Characteristics.Includes 1 x Gigabit Ethernet PCI Express Card, 1 x Standard Profile Bracket, 1 x Driver CD, 1 x Instruction Manual.Platform supported: PC.Warranty: 2 years limited.Startech Gigabit Ethernet card comes pre-configured with a low-profile/half-height installation bracket and has thickness of 700 mil.