IDE PATA Connector

5 results
StarTech 40-Pin IDE PATA to SATA Adapter Converter For HDD/SSD/ODD (IDE2SATA) image 1
Item: IM1RZ3115
Model: IDE2SAT2

Startech.comĀ® 40-Pin IDE PATA to SATA adapter converter provides ODD support which allows you to add Blu-ray, DVD or CD-ROM drives to an older IDE motherboard. Converter provides support for 48-bit logical block addressing..Hard drive accessory type: IDE to SATA adapter converter.Red.Dimensions: 0.9"(H) x 0.8"(W).Chipset ID: Marvell 88SA8852.Connector type: 1 x IDE (40 Pin, EIDE/PATA), 1 x SATA data and power combo (7+15 pin), 1 x SP4 (4 pin small drive power).Maximum data transfer rate: 133 Mbps.Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection.Hassle free installation, with no software CD required.Support for 48-bit logical block addressing.Compliant with SATA revision 1.0 specification, compatible with Ultra ATA 133 specification.Supports 2 1/2", 3 1/2", and 5 1/4" SATA drives.Internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface.Ideal for use with older motherboards that do not support SATA.Compatibility: Blu-ray drive, DVD drive, CD-ROM drive.Environmental info: 5 - 50 Deg C operating temperature, 15 - 90% relative humidity.System requirements: An IDE controller and ATA cable.Certifications and standards: FCC, RoHS.Includes 40-pin IDE PATA to SATA adapter converter for HDD/SSD/ODD, 1 x LP4 Molex to SP4 power cable, 1 x instruction manual.Warranty: 2 years limited.Startech.comĀ® 40-Pin IDE PATA to SATA adapter converter helps to connect a SATA device to an IDE/ATA motherboard and is ideal for use with older motherboards that do not support SATA.

Price isĀ  $27.39
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
No reviews yet
StarTech PEX2IDE PCI Standard Profile IDE Controller Adapter Card image 1
Item: IM1Q16080
Model: PEX2IDE

Compatible with Windows 2000, XP (32/64-bit), Server 2008 R2, Vista (32/64-bit), 7 (32/64-bit), and 8 (32/64-bit)..Interface: IDE.Data transfer rate: Up to 1.04 Gb/s.Ports: 1 x 44-pin IDC male ultra ATA/133 (ATA-7) ultra ATA.Form factor: Plug-in card.Platform supported: PC.Number of ports: 1.Card type: Standard profile.Chipset ID: JMicron - J MB368.Connector type: 1 x PCIe male.Includes a low profile installation bracket, supports ATA/ATAPI commands, 48-bit LBA support, supports UDMA 6 mode which supports transfer rates up to 133 Mbps.Applications: Add an additional IDE port to a computer system, replace a failed IDE port, add an IDE port for connecting legacy ATA devices such as old hard drives and tape drives.System and cable requirements: PCIe expansion slot.Package contents: 1 x PCIe IDE controller card, 1 x IDE cable, 1 x low profile bracket, 1 instruction manual.Certification and standards: CE, ROHS, FCC.Warranty: Lifetime limited.Warranty: Lifetime limited.Startech.ComĀ® PEX2IDE PCI Standard Profile IDE Controller Adapter Card provides both standard and low profile brackets for adapting to slimline or small form factor system applications.

Price isĀ  $32.99
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
2
StarTech SAT2IDEADP SATA to 2 1/2"/3 1/2" IDE Hard Drive Adapter For Hard Drive Docks (SAT2IDEADP) image 1
Item: IM1GU5371
Model: SAT2IDEADP

This adapter enables you to use your 2 1/2-inch or 3 1/2-inch IDE-based (PATA) hard drives in most StarTech.com SATA-based HDD docking stations and drive duplicators..Interfaces ports IDE, SATA.No. of expansion bays 1.Dimensions 1"(H) x 3.1"(W) x 4"(L).Controller type ULtra ATA, SATA.Enclosure type Steel.Black.Drive installation Fixed.Number of drives 1.Chipset ID Jmicron - JM20330.Drive connectors 1 - IDE (40 Pin; EIDE PATA) female, 1 - IDE (44 Pin; EIDE PATA; 2 1 2" HDD) female, 1 - LP4 (4 pin; molex large drive power) female.Host connectors 1 - SATA (7 pin; data) plug, 1 - SATA power (15 pin) plug.Temperature 41 - 176 deg F operating, -40 - 158 deg F storage; Humidity 8 - 90 percent RH.OS compatibility OS independent; no software or drivers required.Includes 40-pin to 44-pin IDE cable with power, SP4 to LP4 power cable, package of mounting screws, instruction manual.Certifications and standards CE, FC, RoHs.Warranty 2 years limited.Startech.ComĀ® SAT2IDEADP SATA to 2.5"/3.5" IDE Hard Drive Adapter offers mounting holes for both 2.5" and 3.5" form factor IDE hard drives.

Price isĀ  $48.12
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
No reviews yet
StarTech External Universal Docking Station for 2.5"/3.5" SATA and IDE Hard Drives (UNIDOCKU33) image 1
Item: IM1YW7229
Model: UNIDOCKU33

The StarTech.com Ā® black USB 3.0 universal docking station offers hassle free connection for IDE and a SATA 2.5"/3.5" hard drive or solid-state drive. It incorporates JMicron - JMS561U, JMD330 chipset reliable performance. This universal docking station supports one 40-pin IDE connector, one 4-pin LP4 male connector, one 7+15-pin SATA data and power combo receptacle. With plug-and-play and hot-swap features, it allows installing/removing the converter unit without any risk..Input voltage: 110 - 240 VAC, Output voltage: 12 VDC, Input current: 2.2 A, Output current: 16.6 A, Plug type: M, Center tip polarity: Positive.Has plastic construction for durability.Form factor: External, Chipset ID: JMicron - JMS561U, JMD330.Comes in black color.Dimensions: 2.8"(H) x 5.1"(W) x 5.8"(D).Operating temperature: 5 - 80 deg C, Storage temperature: -40 - 70 deg C, Humidity: 8 - 90 percent RH.Provides optimal performance with support for SATA III & UASP and provides hassle-free operation with upright slot-loading SATA, IDE drive bays.Features compact, desktop-style form factor and patented drive ejection mechanism for SATA drives.Includes hard drive dock, USB 3.0 cable, IDE 40 to 40-pin cable, LP4 power cable, 40-pin + LP4 to 44-pin IDE cable, power adapter and manual.Weight: 18.1 oz..Comes with 2 years warranty.StarTech.com UNIDOCKU33 universal external features a patented drive ejection mechanism for SATA drives.

Price isĀ  $105.9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
No reviews yet
StarTech 3 1/2" Drive Bay IDE to Single CF SSD Adapter Card Reader image 1
Item: IM1M75239
Model: 35BAYCF2IDE

This compact flash IDE adapter is a perfect solution for accessing CompactFlash (CF I, CF II) and IBM micro drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive..CompactFlash.Includes: Compact flash to IDE adapter, 3 1/2" enclosure, full profile expansion slot bracket, SP4 to LP4 molex power cable, instruction manual.Interface: 1 x 44 pin IDE/EIDE.Media supported: CompactFlash Type I, II, microdrive.Host connectors: 1 - IDE (40 Pin, EIDE/PATA) male, 1 - SP4 (4 pin, small drive power) male.Compatible slots: 1 x expansion slot, Compatible bays: 1 x front accessible - 3 1/2" x 1/3H.Use your compact flash card as a bootable and removable device.Excellent for swapping operating systems quickly without having to take your computer apart.Easily swap cards in and out with built in push button ejector.Easy to use jumpers offer simple master/slave drive setting.Can be mounted in the front or rear panel of your case, to fit into any 3 1/2" bay or available expansion slot.Temperature: - 67 to 185 deg F, Humidity: 5 to 85% RH.Certifications and standards: FCC, RoHS.Weight: 5.1 oz.Warranty: 2 years limited.StarTech Drive Bay Single CompactFlash Card Reader/Writer - Flashcard Accessibility

Price isĀ  $39.6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
1

You May Also Like

StarTech 2.5" to 3.5" SATA Hard Drive Adapter Enclosure image 1
Item: IM1TW6107
Model: 25SAT35HDD

StarTech 2.5" to 3.5" SATA Hard Drive Adapter Enclosure.Hard drive accessory type: SATA hard drive adapter enclosure.Dimensions: 1.4"(H) x 4"(W) x 5.7"(L).Interfaces: Drive connector: SATA/600.Support for SATA revision I/II/III (1.5/3/6 Gbps), tool less installation, supports 2.5" SSD/HDD up to 12.5 mm in height, standard 3.5" HDD mounting points, material: Aluminum, plastic.Drive connectors: 1 x SATA data and power combo (7+15-pin), host connectors: 1 x SATA data and power combo (7+15-pin).Data transfer rate: 6 Gbps SATA III.Max drive capacity: Currently tested with up to 1TB 7200 RPM hard drives.Operating temperature: 5 - 55 deg C, humidity: 5 - 85%RH.Drive size: 2 1/2", drive installation: Removable.Supports 2 1/2" SSD/HDD up to 12.5 mm in height, SATA revision I/II/III (1.5/3.0/6.0 Gbps).Improve the performance speed of any 3 1/2" hard drive application by adapting a 2 1/2" solid state drive.Tool less installation.I/O expansions: Number of total expansion bays: 1, number of 2 1/2" bays: 1.Includes 1 x 2 1/2" to 3 1/2" SATA HDD/SSD enclosure, 1 x screw kit, 1 x install guide.Weight: 9.2 oz..Warranty: 2 years limited.Startech.comĀ® 2 1/2" to 3 1/2" SATA hard drive adapter enclosure has internal form factor and includes serial ATA/600 drive interface.

Price isĀ  $36.99
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
8
StarTech USB 3.1 (10Gbps) Adapter Cable for 2.5" SATA SSD/HDD Drives image 1
Item: IM11N0113
Model: USB312SAT3CB

Here's a fast, easy way to access data on a 2.5" solid-state or hard drive. This cable-style adapter lets you connect your laptop or desktop computer directly to a solid-state drive and access it through ultra-fast USB 3.1 Gen. 2 (up to 10 Gbps). With the adapter cable, you can quickly swap hard drives without having to install your drives into an enclosure. You can copy or retrieve data from a 2.5" SSD/HDD quickly with no additional accessories required. It gives you easy drive access for data migration, drive cloning and data backup applications, with the fast performance of USB 3.1 Gen 2. USB 3.1 Gen 2 gives you greater bandwidth and speed with rates of up to 10 Gbps - twice the speed of USB 3.0 (USB 3.1 Gen 1) technology. It lets you leverage the high performance of the latest SSDs and hard drives, while alleviating bottlenecks in your data transfers. This cable-style adapter features a compact, lightweight design that tucks easily into a laptop bag or carrying case. Use it wherever you go to access valuable data quickly - with no external power required..QUICKLY ACCESS A SATA SSD OR HDD: This USB 3.1 to SATA cable delivers instant access to your 2.5" SATA drives from your laptop or computer; The adapter is compatible with SATA I, II and III (up to 6Gbps) NOTE: Supports 2.5" SATA drives only. For 3.5" drives please see our USB312SAT3.FAST TRANSFER SPEEDS & UASP SUPPORT: The SATA hard drive adapter cable lets users experience enhanced performance and super-fast data transfer speeds with support for USB 3.1 (10Gbps) and UASP.CONNECT FROM ANYWHERE: The external HDD / SSD storage converter delivers perfect portability, tucking away nicely in a laptop bag; The cable-style adapter is USB-powered so no external power cords are required.1 x SATA/Power.PLUG-AND-PLAY: Access any 2.5" hard drive or solid-state drive from any USB enabled computer by simply plugging in the SATA adapter cable; you can easily swap between drives with no need to install the drive inside an enclosure.Black.Connect a 2.5" SATA SSD/HDD to your computer using this USB 3.1 Gen 2 ultra-portable cable

Price isĀ  $25.19
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
No reviews yet
StarTech Drive Docking Station for 2.5 / 3.5" SATA Drives USB 3.1 image 1
Item: IM18J2904
Model: SDOCKU313E

StarTech Drive Docking Station.Device Type: HDD docking station - external.Bays: 1.Bus Type: eSATA, USB 3.1 (Gen 2).Color: Black.Expansion Bays: 1 x hot-swap - 2.5" / 3.5" shared.Hard Drive Form Factor Compatibility: 2.5", 3.5".Interface: SATA 6Gb/s

Price isĀ  $93.01
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
11
StarTech 2.5" SATA Hard Drive to 3.5in Drive Bay Mounting Kit image 1
Item: IM1U45945
Model: BRACKET25SAT

StarTech 2.5in SATA Hard Drive to 3.5in Drive Bay Mounting Kit.Hard drive accessory type: SATA.Drive connectors: 1 x SATA data and power combo (7 + 15 pin) receptacle.Host connectors: 1 x LP4 (4 pin - Molex large drive power) male, 1 x SATA (7 pin - data) receptacle.2 1/2" SATA hard drive in a 3 1/2" drive bay.A metal mounting bracket ensures the drive is reliably secure and provides heat dissipation from the drive.Features a sturdy aluminum bracket as well as a combined SATA cable which helps simplify installation and reduce clutter within the computer case.Device supported: Hard disk drive.Compatibility: PC.Green compliance certificate/authority: RoHS.Material: Aluminum.Package contents: 3 1/2" mounting bracket, data/power adapter cable, screw kit.2 years warranty.Bay provided: 1 x 2 1/2" internal, bay required: 1 x 3 1/2" internal.StarTech.com Drive Bay Mounting Kit - Secure Your Internal Hard Drive

Price isĀ  $13.99
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
No reviews yet
StarTech SDOCK2U33EB USB 3.0/eSATA Hard Drive Docking Station W/UASP for 2.5"/3.5" SATA SSD/HDD image 1
Item: IM1VM2988
Model: SDOCK2U33EB

Startech.comĀ® USB 3.0/eSATA Docking station hard drive measures 2.8" x 5.2" x 5.6" with serial ATA/600 drive interface and offers removable drive installation. Hard drive supports PC, Mac and Linux platform..Hard drive accessory type: Docking station.Number of total expansion bays: 2, number of 5.25" bays: No, number of 2.5"/3.5" bays: 2.Black.Drive interface: Serial ATA/600, form factor: External, power source: AC adapter, drive installation: Removable, chipset ID: JMicron - JMS562.Host interface: USB 3.0, eSATA, material: Plastic.Input voltage: 120 - 230 VAC, input current: 1.3 A, output current: 3000 mA.Dimension: 2.8"(H) x 5.2"(W) x 5.6"(D).Temperature: 5 to 35 deg C (operating), -20 to 50 deg C (storage), Humidity: 20 to 80%RH.OS compatibility: Windows 8/8.1 (32/64bit), 7 (32/64bit), Server 2008 (32/64), Vista(32/64), Server 2003 (32/64) XP(32/64), 2000, AppleĀ® Mavericks (10.9) OSX Mountain Lion (10.8), Lion (10.7), Snow Leopard (10.6), Linux, Google Chromeā„¢ OS.Compatible with: USB 3.0/2.0/1.1 (5 Gbps / 480 Mbps / 1.5 Mbps).Drive connectors: 2 - SATA data & power combo (7+15 pin) receptacle, Host connectors: 1 - eSATA (7 pin; data) female, 1 - USB 3.0 B (9 pin; superspeed) female.UASP support: Yes, Type and rate: SATA III (6 Gbps).Max drive capacity: Currently tested with up to 4TB 7200 RPM 3.5"Hard drives per bay (8TB total) and 2TB 5900 RPM 2.5"Hard drives (2TB total), Insertion rating: 15000 Cycles.Platform supported: PC, Mac, Linux.Certifications and standards: FCC, CE.Green compliance certificate/authority: RoHS.Package contents: USB 3.0/eSATA to Dual 2.5/3.5in SATA hard drive docking station, 1 x USB 3.0 cable, 1 x eSATA cable, 1 x universal power adapter (NA/UK/EU), 1 x instruction manual.Weight: 1.08 lbs..Warranty: 2 years limited.Startech.comĀ® USB 3.0/eSATA Docking station hard drive in black color is constructed out of plastic material for long durability.

Price isĀ  $98.5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
2
StarTech Dual Bay for 2 x 2.5 / 3.5" SATA SSD / HDD Hard Drive Docking Station (SDOCK2U33V) image 1
Item: IM12FN471
Model: SDOCK2U33V

Use this SATA hard drive docking station to gain quick access to two of your 2.5" or 3.5" SATA III SSDs/HDDs - Access two 2.5/3.5ā€ SATA hard drives or solid state drives simultaneously and hot swap drives in and out of this HDD docking station - Dual Bay SATA HDD Docking Station features plug-and-play functionality - Gen 1 USB 3.1 hard drive dock with data transfer speeds of up to 5Gbps (AKA USB 3.0) / SATA docking station / SSD docking station / SATA drive dock / USB3 HDD docking station.Access two 2.5/3.5ā€ SATA hard drives (HDD) or solid state drives (SSD) simultaneously and hot swap drives in and out.USB 3.0 with data transfer speeds of up to 5Gbps.Convenient top-loading design with independent drive doors.Plug-and-play functionality.Easy to set up with no driver or software installation required.Use this SATA hard drive docking station to gain quick access to two of your 2.5" or 3.5" SATA III SSDs/HDDs

Price isĀ  $84.64
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
2
StartechĀ® 8.3" USB 3.0 to 2.5" SATA III Hard Drive Adapter Cable W/UASP/SATA to USB3.0 Converter image 1
Item: IM1UN4218
Model: USB3S2SAT3CB

StartechĀ® 8.3" USB 3.0 to 2.5" SATA III Hard Drive Adapter Cable W/UASP/SATA to USB3.0 Converter.Hard drive accessory type: SATA III hard drive adapter cable.8.3".Black.Dimensions: 0.4"(H) x 1.9"(W) x 8.3"(L).Interfaces: Drive connector: 1 x 7+15-pin SATA data & power combo receptacle, host connectors: 1 x 9-pin SuperSpeed USB 3.0 A male.Conductor: Copper.Supports USB 3.0 data transfer speeds of 5Gbps and is backward compatible with USB 2.0.Copper.SATA to USB Adapter Cable | SATA III 6Gbps | 2.5" SSD or HDD | USB 3.0 | Portable

Price isĀ  $23.09
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
67
StarTech USB 3.0 SATA II Hard Drive Docking Station 2.5" for SSD & HDD (SATDOCKU3S) image 1
Item: IM1CK1619
Model: SATDOCKU3S

This StarTech USB 3.0 Hard Drive Docking Station delivers full, instant access to any 2.5-inch or 3.5-inch SATA (SATA, SATA II, SATA III) hard drive (HDD) or solid state drive (SSD), without having to mount the drive in a computer or install it in an external enclosure. Large capacity drives (tested with up to 4TB 3.5"" and 1TB 2.5"" drives) greatly enhance your computer's storage/backup capabilities..SuperSpeed USB 3.0 compliant host interface, with transfer rates up to 5Gbps. High Speed USB 2.0 compliant host interface, with transfer rates up to 480Mbps.Supports 2.5" and 3.5" form factor SATA hard drives (HDD) and solid state drives (SSD).Dimensions 2.6"(H) x 3.7"(W) x 5.7"(L).1 Expansion bay.Compatible with SATA revision 1/2/3 (1.5/3.0/6.0 Gbps) drives.Compact, desktop-style form factor in a solid black color.Drive connectors: 1 - SATA data and power combo (7+15 pin) receptacle.Host connector: 1 - USB 3.0 B (9 pin; SuperSpeed) female.Compatible with Microsoft Windows, Apple OSX, Linux, and Google Chrome OS.Certifications and standards CE, FCC, RoHs.2-Year Limited Warranty.A top slot-loading design and unique drive ejection mechanism provides quick and easy access to the data without having to install drives into an enclosure or tray.LED indicators 1 - power and activity (solid - power, blinking - activity); Power 12 VDC, 2.5A.Temperature 41 - 176 deg F operating, -40 - 158 deg F Storage; Humidity 8 - 80 percent RH.OS compatibility Windows 2000 XP (32 64-bit) Server 2003 (32 64-bit) Server 2008 R2 Vista (32 64-bit) 7 (32 64-bit) 8 (32 64-bit), Linux 2.6.31 and up.Insertion rating 15000 cycles.Includes USB 3.0 HDD dock, USB 3.0 cable, universal power adapter, 3 x power adapter plug (NA EU UK), instruction manual.Certifications and standards CE, FCC, RoHs.Warranty 2 years limited.StarTech USB 3.0 SATA II Hard Drive Docking Station is capable of transfer speed up 5 Gbps, making it the fastest way to access data from an external drive.

Price isĀ  $60.09
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
6
StarTech SDOCK2U33 USB 3.0 Dual Hard Drive Docking Station with UASP for 2.5"/3.5" SSD/HDD image 1
Item: IM1VM2987
Model: SDOCK2U33

Startech.comĀ® USB3.0 Dual hard drive docking station measures 2.8" x 5.2" x 5.8" with serial ATA/600 drive interface and offers removable drive installation. Docking station has independent power buttons for each hard drive..Hard drive accessory type: Docking station.Number of total expansion bays: 2, number of 5.25" bays: No, number of 2.5"/3.5" bays: 2.Black.Drive interface: Serial ATA/600, form factor: External, power source: AC adapter, drive installation: Removable, chipset ID: VIA/VLI - VL812, ASMedia ASM1053E.Host interface: USB 3.0, material: Plastic.Input voltage: 120 - 230 VAC, input current: 1.3 A, output current: 3A, output voltage: 12 DC.Dimension: 2.8"(H) x 5.2"(W) x 5.8"(D).Temperature: 5 to 35 deg C (operating), -20 to 50 deg C (storage), Humidity: 20 to 80%RH.OS compatibility: Windows 8/8.1 (32/64bit), 7 (32/64bit), Server 2008 (32/64), Vista(32/64), Server 2003 (32/64) XP(32/64), 2000, AppleĀ® Mavericks (10.9) OSX Mountain Lion (10.8), Lion (10.7), Snow Leopard (10.6), Linux, Google Chromeā„¢ OS.Compatible with: SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives.Drive connectors: 2 - SATA data & power combo (7+15 pin) receptacle, Host connectors: 1 - USB 3.0 B (9 pin; superspeed) female.UASP support: Yes.Max drive capacity: Currently tested with up to 4TB 7200 RPM 3.5"Hard drives per bay (8TB total) and 2TB 5900 RPM 2.5"Hard drives (2TB total), Insertion rating: 15000 Cycles.Platform supported: PC, Mac, Linux.Certifications and standards: FCC, CE.Green compliance certificate/authority: RoHS.Package contents: USB 3.0 to dual 2.5/3.5in SATA hard drive docking station, 1 x 3ft (1m) USB 3.0 cable, 1 x universal power adapter (NA/UK/EU), 1 x instruction manual.Weight: 1.10 lbs..Warranty: 2 years limited.Startech.comĀ® USB3.0 Dual docking station hard drive in black color is constructed out of plastic material for long durability.

Price isĀ  $93.36
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
2
StarTech.com USB C to SATA Adapter Cable for 2.5"/3.5" SSD/HDD Drives, USB 3.1 Hard Drive Adapter Cable, SATA USB adapter image 1
Item: IM11AX344
Model: USB31C2SAT3

Connect a 2.5" or 3.5" SATA SSD/HDD to your USB-C enabled computer, with this USB 3.1 adapter cable. This USB-Cā„¢ to SATA adapter cable gives you fast and easy access to the data on your 2.5 in./3.5 in. solid-state drives and hard drives. The adapter cable lets you connect your USB-C enabled laptop or desktop computer directly to a SATA drive and access it through ultra-fast USB 3.1 Gen. 2 (up to 10Gbps)..Connect a 2.5"/3.5" SATA drive to your USB-C enabled laptop or desktop computer, for quick access to your external data.Fast data transfer rates through USB 3.1 Gen 2 (10Gbps).Integrated 1 m cable, for convenient use.Certifications and standards: WEEE, RoHS

Price isĀ  $64.23
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
No reviews yet
StarTech 2.5in SATA/SAS SSD/HDD to 3.5in SATA Hard Drive Converter (25SATSAS35) image 1
Item: IM1LJ6815
Model: 25SATSAS35

StarTech Hard drive converter measures 1" x 3.9" x 5.7" and is designed for 2 1/2" SATA/SAS SSD/HDD to 3 1/2" SATA conversion. Internal converter features Lightweight plastic construction with air vents..Black.Interfaces: SAS, serial ATA.Interface connectors: 1 - SFF - 8482 (29 pin, data and power, internal SAS) receptacle, 1 - SATA data and power combo (7+15 pin) plug.Form factor: Internal.Dimensions: 1"(H) x 3.9"(W) x 5.7"(L).Applications: Install a 2 1/2" hard drive into a 3 1/2" hard drive enclosure or backplane.Lightweight plastic construction with air vents.Supports 2 1/2" form factor hard drives (HDD) and solid state drives (SSD) up to 15 mm in height.Includes: 2 1/2" - 3 1/2" HDD converter.Certifications and standards: RoHS, FCC, CE.Weight: 4.8 oz..Warranty: 2 years limited.StarTech 2.5-to-3.5-Inch Drive Converter - Avoid Buying New Hard Drives

Price isĀ  $28.29
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
11
StarTech 8-Port PCI Express SATA Expansion Adapter Card (8P6G-PCIE-SATA-CARD) image 1
Item: IM19MG483
Model: 8P6G-PCIE-SATA-CARD

StarTech eight-port SATA III (6Gbps) controller enables you to add eight SATA 6Gbps hard drives (HDDs) or solid State Drives (SSDs) to your computer system or server via an available PCIe x4 card slot. The card supports SATA III and PCI-Express Gen 2 Specifications and four SATA controllers to deliver a high-performance data storage solution..PCI Express SATA expansion adapter card with four host controllers.Maximum data transfer rate is 6Gbps.Card type: standard profile (LP bracket incl.) with eight ports; internal ports: SFF-8087 (36 Pin, Internal Mini-SAS).OS compatibility: Windows 7, 8, 8.1, 10; Windows Server 2003, 2008 R2, 2012, 2012 R2, 2016, 2019; macOS 10.10 to 12; Linux 2.6.32 and up.2-year manufacturer limited warranty

Price isĀ  $127.07
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
2
StarTech 2 Port PCI Express SuperSpeed USB 3.0 Card Adapter image 1
Item: IM1UX5097
Model: PEXUSB3S24

Startech.comĀ® 2 Port PCI express super speed USB 3.0 card adapter comes with an optional SATA power connector to deliver up to 900 mA of power per port. Card adapter includes a cable that can extend up to a distance 9.8' for easy access..1 - PCI Express x1 male.At the same peak in testing, UASP also showed up to an 80 % reduction in required processor resources.9.8'.Dimensions: 4.7"(H) x 2.6"(W) x 0.7"(D).Interface/ports: 2 x USB 3.0 A Female, 1 - SATA Power (15 pin) Plug.Form factor: Plug-in card.Hardware: Standard Profile (LP bracket incl.) card type, NEC - MicroPD720202 Chipset ID,.Temperature: 5 - 50 deg C (operating), -25 - 70 deg C (storage), Humidity: 20 - 80 % RH.Data transfer rate: 5 Gbps, Type and rate: USB 3.0 - 5 Gbit/s.Connect additional external hard drives, CD/DVD drives, MP3 players, printers, scanners, webcams, game controllers, digital cameras, etc. to a computer system.Expand the USB capabilities of your system with two additional external ports, upgrade an older PCIe-based system from USB 2.0 to USB 3.0 connectivity.For added versatility, the controller card is equipped with a standard profile bracket and includes a low-profile/half-height bracket for installation in small form-factor computers.USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a UASP supported enclosure.Using a more efficient protocol than the traditional USB BOT, UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data-transfers.Includes 1 x PCI express USB 3.0 card, 1 x low profile bracket, 1 x driver CD, instruction manual.Compatibility: Windows 8 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64) Windows Server 2012, 2008 R2, 2003(32/64) Linux 2.6.31 or later.Weight: 1.4 oz..Warranty: 2 years limited.Startech.comĀ® 2 Port PCI express super speed USB 3.0 card adapter supports a maximum data transfer rate up 5 Gb/s to increases the efficiency and is compatible with PC as well as Linux platform.

Price isĀ  $41.32
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
3
StarTech 2.5"/3.5" USB 3.1 External SATA Hard Drive Enclosure, SSD & HDD, Black (SDOCKU313) image 1
Item: IM11C7595
Model: SDOCKU313

This StarTech 6TB USB 3.1 hard drive single-bay dock features a HDD ejection button that permits fast and simple drive removal. The top-loading design provides easy drive access and multi-function LED indicators for user convenience. It access data from one 2.5 or 3.5" SATA SDD/HDD over ultra-fast USB 3.1 Gen 2. It supports USB 3.1 and UASP with file transfer speeds of up to 6 Gbps. An UASP support provides better performance while USB type-A to B cable for easy compatibility..Drive capacity of up to 6TB for reliable data storage.Features serial ATA/600 drive interface for more efficient data transfer.Operates at 100 - 240 VAC, 0.8 A input and delivers 12 VDC, 2 A output.Made of plastic for durability.Drive size: 2.5".Has external form factor.Supports USB 3.1 Gen 2 with file transfer speed of up to 10 Gbps and SATA III with file transfer speed of up to 6 Gbps.Number of 2.5" bays: 2.Max drive height: 0.4".Features SATA data and power combo receptacle for drive connection.Top-loading design with built-in ejection button for easy drive access, UASP support for enhanced performance.Backward compatible with USB 3.0, 2.0 and 1.x.Back up data quickly to an external drive for archiving.Perfect for system builders and IT professionals who need quick access to drives for imaging.Dimensions: 2.5"H x 3.6"W x 5.7"D.Temperature: 5 - 35 deg C operating, -20 - 50 deg C storage, Humidity: 20 - 80% RH.Includes USB 3.1 HDD dock, USB cable, universal power adapter, 4 power adapter plugs, quick install guide.Meets FCC, CE, RoHS certification and standards.Weight: 14 oz..Comes with 2 years warranty.The StarTech 6TB USB 3.1 hard drive single-bay dock in black, is compatible for use with 2.5"/3.5" SATA SSD/HDD drives.

Price isĀ  $90.41
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
4
StarTech 4-port SATA III Controller (4P6G-PCIE-SATA-CARD) image 1
Item: IM19ZX023
Model: 4P6G-PCIE-SATA-CARD

This four-port SATA III (6Gbps) controller enables you to add four SATA 6Gbps hard drives (HDDs) or Solid State Drives (SSDs) to your computer system or server via an available PCIe x2 card slot. The card supports SATA III and PCI-Express 3.0 specifications..Add four SATA III 6Gbps ports to your desktop computer or server using a PCIe x2 slot to connect SATA drives (HDD/SSD).Enables the connection of four high-performance SATA 6Gbps drives with a combined total throughput of up to 16Gbps.The SATA drives are connected via four individual SATA ports located on the card (SATA cables sold separately).Widely supported across all popular operating system platforms including Windows (7, 8, 10, 11), macOS (10.10 and above) and Linux (2.6.32 and above).Supports port multiplier, giving you the ability to connect multiple drives to a single SATA port (additional hardware required, sold separately).Features plug-and-play installation and can be installed in a full-profile or low-profile computer systems with the full-profile bracket preinstalled, and an interchangeable low-profile (half-height) bracket included.Manage your drives and built RAID arrays with storage management systems such as Storage Spaces (Microsoft), RAID Assistant (macOS), mdraid/mdadm (Linux).2-year manufacturer limited warranty

Price isĀ  $54.7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
1
StarTech SDOCK2U33RE USB 3.0/eSATA to 2.5/3.5" SATA HDD/SSD Duplicator Dock image 1
Item: IM1VW2478
Model: SDOCK2U33RE

The SDOCK2U33RE Dual 2.5/3.5" SATA HDD/SSD duplicator dock lets you duplicate/clone an existing hard drive without the use of a host computer system -- or dock and swap drives from your desktop or laptop computer simultaneously, using a single USB or eSATA port. The SDOCK2U33RE offers convenient dual-function performance. As a hard drive duplicator, the SDOCK2U33RE lets you create an exact sector-by-sector clone from one hard drive to another, including partitions and boot sector information -- ensuring data integrity and consistency for sensitive operations, such as data recovery. As an external hard drive dock the SDOCK2U33RE lets you connect your drives through either eSATA or USB, with each drive slot individually supporting high capacity 2.5/3.5" hard drives or solid state drives, tested up to 4 TB. With support for SATA III (6 Gbps) you can maximize efficiency with duplication speeds up to 22 GB per minute, and eSATA docking speeds up to 6 Gbps. The Dock can also be connected through USB 3.0 with UASP for transfer speeds up 5 Gbps (70% faster than conventional USB 3.0). See our UASP testing results below for further details..Standalone sector-by-sector hard drive duplication with speeds up to 22GB per minute.Supports both 2.5" and 3.5" form factor hard drives (HDD) and solid state drives (SSD).eSATA and USB 3.0 host interface connections.1:1 hard drive duplicator and docking station.Support SATA III (6 Gbps) and UASP for optimal performance.Supports dual drive capacity up to 4 TB per slot (8 TB in total).Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives.Compatible with USB 3.0/2.0/1.1 (5 Gbps / 480 Mbps / 1.5 Mbps).Dual bay, top slot-loading design with drive doors.OS Compatibility: OS independent; No software or drivers required.What's in the Box: SATA HDD duplicator dock, USB 3.0 cable, eSATA cable, universal power adapter (NA,UK,EU, ANZ), instruction manual.Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB 3.0 or eSATA for easy access

Price isĀ  $174.26
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Over 30
Add to list
19

About IDE PATA Connector

IDE PATA connectors are essential for connecting older hard drives and optical drives to modern systems. These versatile adapters facilitate seamless data transfer between IDE and SATA interfaces, ensuring compatibility with various devices. Designed for easy installation, they provide a reliable solution for upgrading or integrating legacy hardware into current setups, making them ideal for both personal and professional use.

Our selection of IDE PATA connectors features durable construction and efficient performance, allowing for quick access to data stored on older drives. Whether you need to connect a hard drive to a docking station or adapt a drive bay for SSD use, these connectors offer the flexibility and functionality required for effective data management. Enhance your system's capabilities with our reliable IDE PATA connector options.