Long-Distance Fiber-Optic Cable

The Fluke Networks® SMC-9-SCST 524.93' Single mode fiber optic cable with SC male connectors on both the ends is compatible with OptiFiber Pro OTDR and DTX-1800 OTDR..Fiber optic cable is perfect for network devices.Cable length: 524.93'.Connector on first end: SC male network.Connector on second end: ST male network.Compatible with OptiFiber Pro OTDR and DTX-1800 OTDR.Cable type: Fiber optic.Fiber optic mode: Single-mode

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 65.6'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 32.8'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 32.8'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 49.2'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 16.4'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech Single Mode OS2 LC to LC duplex fiber optic patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single mode OS2 duplex fiber optic patch cable facilitates connectivity across 10G networks.Cable length is 22.9'.Contains two fiber optic LC duplex connectors.Made of polypropylene in yellow with straight blue connectors.Can be used in 10 Gigabit Ethernet and fiber-channel applications.Supports 1260-1625nm laser-optimized sources and is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.Perfect for critical connections between servers, switches, and data center equipment.Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire.Enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.For high-speed, low-latency connections between servers, switches, and storage devices.Enable seamless data transmission with minimal signal loss.Color-coded connectors to indicate polarity.Lifetime manufacturer limited warranty

StarTech.com® 50/125 micrometer Duplex multimode fiber optic cable is 16.4' long and is suitable for high performance patch and fiber data distribution systems. Transmits data at a speed of 10 Gb/s. Cable has male LC network connectors on the first and second end for providing smooth connection between fiber networking devices. Aqua cord durable cable design is suitable for high bandwidth data transmissions over 10 gigabit Ethernet and fiber channel network. Perfect solution for fiber cable that runs between multiple backbone switches, hubs, routers and higher end networking equipment. Molded connector cable has flame retardant low smoke zero halogen jacket for optimal insulation and ensures minimal smoke, toxicity as well as corrosion when exposed to high sources of heat..Fiber optic cable is suitable for long-distance networks with mission critical data and broadband systems.A convenient length of 16.4' for ease of installation.Features 2 x LC male at first end and 2 x LC male at second end connectors for secure data transmission.Recommended for maximum data transfer rate of 10 Gb/s.Utilizes copper conductors with a LSZH jacket for optimum installation.StarTech.com® A50FBLCLC5 16.4' Aqua network cable with LC male connectivity on both ends allow you to quickly transfer data. Supports data transfer speed rate of up to 10 Gb/s.

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 6.6'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

StarTech OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances. Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments..Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs.Cable length is 9.8'.LC/LC-UPC ends for improved return loss over PC polish.LSZH jacket emits low toxic fumes if combusted.Supports up to 100Gbps data transfer rate.Backward compatible with OS1.Meets or exceeds the WEEE standards.Supports bi-directional (BiDi) transmission over a single fiber.Perfect for space-constrained installations requiring minimal fiber count.Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm.Lifetime manufacturer limited warranty

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Enhance the performance capabilities of CWDM applications with this OS2 fiber cable.Cable length: 9.8'.SC/SC-UPC ends for improved return loss over PC polish.Bend insensitive fiber core housed in aramid-reinforced yellow jacket for a loaded bend radius of 10mm.Single Mode OS2 fiber cable is immune to EMI and optimized for 10/40/100G networks.Perfect for connecting between servers/switches and data center equipment.Meets or exceeds the ITU-T G652.D/G657.A1 and IEC60703-2-50 Type B1.3/B6.a1 standards.LSZH jacket emits low toxic fumes if combusted; safe for enclosed/poorly ventilated spaces.Attenuation value under 0.35dB/km outperforms industry standards.Backward compatible with OS1.High micro-bend resistance facilitates tight bends in complex installations.Coarse Wavelength Division Multiplexing (CWDM) enables extended 1260-1625nm wavelength support for greater channel isolation over long distances.Number-labeled connectors to indicate polarity.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable is for use in 100 Gigabit Ethernet and fiber-channel applications.Cable Length ( ft.): 164 ft..This cable is Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 65.6ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single Mode OS2 Fiber Cable is optimized for 100G Networks; Ideal for connecting between servers/switches and data center equipment.131 ft. cable for long distance application.This cable is Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Single Mode Simplex OS2 Fiber Cable is immune to EMI and optimized for 40G/100Gbps networks; Supports bi-directional (BiDi) transmission over a single fiber; Ideal for space-constrained installations requiring minimal fiber count.49.2 ft. fiber optic cable for longer distance application.This cable enables safer cable installations in areas with poor ventilation and is safe to use in any application. It features Ultra Physical Contact (UPC), Bend Insensitivity, Flame Retardant, and Bend Resistance.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.16.4 ft. cable for longer distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 Single Mode Duplex Fiber Optic Cable; Duplex fiber optic cable offers simultaneous, bidirectional data transfer.98.4 ft. fiber optic cable for longer distance application.This cable enables safer cable installations in areas with poor ventilation and is safe to use in any application. It features Ultra Physical Contact (UPC), Bend Insensitivity, Flame Retardant, Bend Resistance and EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 65.6ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable for use in 100 Gigabit Ethernet and fiber-channel applications.98.4 ft. for long distance application.This cable is Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant, Passive.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.26.2ft fiber optic cable for longer distance application.This fiber optic cable features Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, and Bend Resistance.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.32.8 ft. cable for longer distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty

OS2 LC to LC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 82ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Flame Retardant, EMI Protection, Bend Insensitive, Bend Resistant, Laser-optimized, Molded, Strain Relief, Passive.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 49ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime.Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability..Use in 100 Gigabit Ethernet and fiber-channel applications.For high-speed, low-latency connections between servers, switches, and storage devices.Enhance the performance capabilities of CWDM applications over an OS2 fiber network

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Cable Use, Device Type & Use: Network Cable, Fibre Optic.Cable Length (ft): 49ft.Connections (Including Pin counts if applicable): Not Available.Data feature (If applicable): Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.Compatibility listing. If more than 3 items, refer to Extended Description: Network Device, Server, Switch, Storage Device.Certification & Standards: Environmentally Friendly.Warranty Information: Lifetime

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..LC/SC-UPC OS2 Single Mode fiber cable is optimized for 10G networks and for high-speed, low-latency connections.164 ft. cable for long distance application.This cable is Laser-optimized, Bendable, Passive, Ultra Physical Contact (UPC), Flame Retardant, EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 SC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Cable for use in 40/100 Gigabit Ethernet and fiber-channel applications.98.4 ft. fiber optic cable for longer distance application.This cable is Ultra Physical Contact (UPC), Bend Insensitive, Flame Retardant, Bend Resistant.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

OS2 LC to SC Single Mode Duplex Fiber Optic Patch cable facilitates connectivity across 10G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Fiber Optic Network Cable for faster internet connection.82.02 ft. fiber optic cable for longer distance application.This cable features Bend Insensitivity, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, Passive, EMI Protection, and Bendability.Compatible with Network Devices, Servers, Switches, and Storage Devices.Lifetime Warranty

OS2 SC to SC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..OS2 SC to SC Single Mode Simplex Fiber Optic Patch cable for use in 40/100 Gigabit Ethernet and fiber-channel applications.328 ft. fiber optic cable for long distance application.This cable is Passive, Bend Insensitive, Ultra Physical Contact (UPC), UPC Polished Connector, Flame Retardant, EMI Protection, Bendable.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

The Multi Mode OM4 cables are designed to support very high transfer speed, the cables are capable of supporting up to 100gigabit applications at the same time being backward compatible with OM3 and OM2 infrastructure. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports. The ALOGIC OM4 Patch Cables are available in various lengths starting from 1m to 10m length..Designed for ultra-fast fiber optic connections in high-performance networks, perfect for linking LC and ST interface devices in data centers and enterprise setups.Extended 9.84ft length provides maximum flexibility for long-distance installations without compromising speed or reliability.Features LC male connector on one end and ST male connector on the other for secure, precise connectivity.Built with OM4 multimode fiber for superior bandwidth, durable LSZH jacket for long-lasting protection, and a vibrant turquoise color for easy identification.Supports up to 40Gbps high-speed data transfer, making it ideal for demanding networking and storage applications.Works seamlessly with LC and ST interface devices, fiber optic transceivers, and OM4-compliant networking equipment.2 Years Manufacturer's Warranty

OS2 SC to SC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances..Network fiber optic cable optimized for 40G/100Gbps networks; Supports bi-directional (BiDi) transmission over a single fiber; Ideal for space-constrained installations requiring minimal fiber count.98.4 ft. fiber optic cable for longer distance application.This cable enables safer cable installations in areas with poor ventilation and is safe to use in any application. It features Ultra Physical Contact (UPC), Bend Insensitivity, Flame Retardant, Bend Resistance and EMI Protection.For use with Network Devices, Servers, Switches, and Storage Devices.Lifetime warranty

The Single mode OS1 cables are designed to support very high transfer speed, the cables are capable of supporting up to 1Gigabit applications over very long distances. The cables meet or exceed industry standard specifications; each cable is individually tested for maximum reliability and comes with performance reports..Designed for single-mode fiber optic connections, perfect for high-speed networking in enterprise setups and telecom environments.Compact 3.28ft length ensures a clean and organized installation in tight spaces.Features LC male connector on one end and ST male connector on the other for secure and precise connectivity.Built with OS1 single-mode fiber for long-distance data transmission, durable PVC jacket for protection, and a bright yellow color for easy identification.Supports high-speed data transfer over long distances, making it ideal for backbone and telecom applications.Compatible with LC and ST interface devices, fiber optic transceivers, and OS1-compliant networking equipment.2 Years Manufacturer's Warranty