Multimode SFP Modules

This Palo Alto Networks® PAN-SFP-PLUS-SR compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Palo Alto Networks®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..10GBase-SR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Multi-mode fiber mode support for feasible connectivity with added productivity

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

HPE BladeSystem c-Class compatible SFP+ transceiver (455883-B21) supports up to 400m link lengths over OM4 MMF (300m over OM3 MMF) via an LC duplex connector. It is compliant with SFF-8431, SFF-8432 and IEEE 802.3ae standards. Digital diagnostics monitoring is available via a 2-wire serial interface, as specified in SFF-8472. Featuring low power consumptionand and high speed, this 10G SFP+ transceiver is ideal for data centers, enterprise wiring closets, service provider transport applications, Radio & Baseband Units, etc..Interfaces/ports: 1 x 10GBase SR SFP+.Compatibility: PC.Connectivity technology: Wired.Data transfer rate: 10GB/s gigabit ethernet.Maximum transfer distance: 980'.Form factor: Plug in module.HP 10GBase-SR Optical Transceiver Module - PC Compatible

Our Compatible WatchGuard WG8583 SFP+ transceiver is based on our 10G-SFP-300 product, which has the same parameters and is manufactured in accordance with the same industry standards as its OEM counterpart. Our compatible module version is designed for operation over a Double Fiber Multi-Mode Fiber (MMF) optical cable. It has a minimum guaranteed optical budget of 4.6 dB, which typically is enough to reach about 300 meters over OM3 type fiber or 400 meters over OM4 or higher MMF category fiber. However, distance is only an indicative parameter calculated for identification comfort. Finally, we calculate distance while keeping in mind the minimum (guaranteed) optical budget and the average attenuation of optical cabling in the industry. Our WatchGuard WG8583 compatible transceiver uses a high-quality VSCEL Laser transmitter operating at 850 nm nominal wavelength and a 850 nm PIN Photodiode receiver..WatchGuard WG8583 transceiver module is a Multi-Mode Fiber (MMF) & LC Duplex Connector..Its a 10GBASE-SR SFP+ Transceiver Module for 10-Gigabit Ethernet connectivity..Data Transfer Rate for this module is 10,312.5 Mbps (10.3125 Gbps) and 10,312,500 Kbps..Maximum Distance covered by this module is 300 meters.It supports 10-Gigabit Ethernet..The WatchGuard WG8583 has a power consumption of approximately 1.0 watts.It is a hot swappable module..the WatchGuard WG8583 is MSA compliant.The WatchGuard WG8583 has a Mean Time Between Failures (MTBF) of approximately 1,155,348 hours.This transceiver module operates at a wavelength of 850 nm

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.SFP with optical network application/usage for maximum dependability and convenience

Add reliable and cost-effective 10 Gigabit Ethernet connections over multimode fiber with this SFP+ module. This StarTech® 10 Gigabit fiber SFP+ is engineered to deliver reliable network connections. Built to exacting specifications and fully tested to ensure maximum performance, this high-quality fiber transceiver module can be installed into Cisco® switches and routers that support the Cisco SFP-10G-SR-S SFP+ transceiver module, as well as other major brands of networking equipment. This 10GBase-SR SFP+ delivers 10 Gigabit connectivity over multi-mode fiber cable with a range of up to 300 m (984 ft). It provides a dependable and cost-effective way to add, replace or upgrade the ports on your networking equipment, and it's backed by a lifetime warranty. Built for reliable network performance This 10 GbE SFP+ is manufactured by StarTech® to meet or exceed OEM specifications and comply with the industry's MSA (Multi-Source Agreement) standards. Committed to the highest standards of quality, StarTech® provides an extensive range of networking products including copper and fiber network cards, fiber media converters, Ethernet switches and wireless products. Fully compatible with Cisco and other major brands This 10 Gigabit multi-mode SFP+ is engineered to the highest quality standards and is 100% Cisco compatible, equivalent to the Cisco SFP-10G-SR-S SFP SFP+ transceiver. The StarTech® SFP+ is configured and fully tested to ensure it works seamlessly with HP or other major brands of networking equipment. You can be assured that the use of StarTech® SFP+ products should not affect the warranty protection of your networking equipment. Convenient and scalable Delivering both convenience and scalability, this fiber SFP+ transceiver is fully hot-pluggable, which enables you to install it without interrupting network traffic or having to reboot your equipment. It provides a versatile and cost-effective solution that's compatible with a wide range of 10 Gigabit networking devices. Ideal for use in Cisco switches, routers and other networking equipment, the SFP+ optical transceiver provides reliable performance, allowing you to expand your network to remote segments cost-effectively. The multi-mode fiber transceiver module supports Digital Diagnostics Monitoring (DDM), a maximum distance of up to 300 m (984 ft), and maximum data rates of up to 10Gbps. You can count on SFP10GSRSST for reliable performance, backed by a lifetime warranty and free lifetime technical support..100% compatibility with Cisco SFP-10G-SR-S guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1.3 W.Hot-swappable with fiber-optic modules

Cisco 100BASE-FX small form-factor pluggable (SFP) fast Ethernet interface converter is a hot-swappable device that plugs into a gigabit Ethernet SFP port on Cisco catalyst 3750 series, 3560 series, and 2970 series switches..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.4"(H) x 2.2"(W) x 1/2"(D).Compatibility: Cisco catalyst 3750, 3560, and 2970 series switches.Connectivity media: 62.5/125 um multi mode fiber, 50/125 um multi mode fiber.Transmit (dBm): 50/125-micron: -23.5 min, -14max, 62.5/125-micron: -20 min, -14max, receive (dBm): 50/125-micron: -33.35 min, -11.8 max, 62.5/125-micron: -33.35 min, -11.8 max.Distance supported: 6.5'.Operating temperature: 32 - 158 deg F, storage temperature: -40 - 185 deg F.Surge current: 350 typical, wavelength (nm): 1270 min, 1300 typical, 1380 max.Power consumption: 1.5 W per port.Input voltage: 3.3 V - 3.5 V device, 3.3 V typical device.Input current: 405 mA typical, 450 mA maximum.Data transfer rate: 100 Mbps fast Ethernet full duplex.MTBF: 12,820,512 hours.Form factor: Hot-swappable.System requirements: Cisco IOS software release 12.2(20)SE1.Application/usage: Data networking.Regulatory and standards compliance: IEC 60825-1.SFP fast ethernet interface converter 100FX SFP on GE SFP ports for DSBU switches.

Dell™ Sonicwall® 1000Base-SX SFP Short haul transceiver module eliminates potential points of failure associated with separate multiple vendor solutions. Module has SFP mini-GBIC compatible slots and supports wired connectivity technology..Interfaces/ports: 1 x Ethernet 1000Base-SX network.Media & performance: Connectivity media: Optical Fiber 1000Base-SX, Data Transfer rate: 1 Gb/s.Ethernet technology: Gigabit Ethernet.For SuperMassive E10000 Series, SuperMassive 9000 Series.Application/usage: Data Networking, optical network.Form factor: SFP.Warranty: 1 year limited.Dell™ Sonicwall® 1000Base-SX SFP Mini-GBIC short haul transceiver module is used in data networking as well as optical network and has a data transfer rate of 1 Gb/s.

Enable reliable fiber optic connections with this Netgear ProSafe AXM761 10GBASE-SR SFP+ Transceiver. This versatile short reach SFP optical transceiver is designed to deliver up to 10 Gb/s transfer speeds using multi-mode fiber cables with LC duplex connectors..Multimode fiber with an LC connector type for short-range 10 Gigabit Ethernet connectivity..Network Transceiver Type is SFP+, and it is used for providing short-range 10 Gigabit Ethernet connectivity over multimode fiber..Module supports a data transfer rate of 10 Gbps (10,000 Mbps) for high-speed connectivity..Provides connectivity up to 300 meters on OM3 fiber and up to 400–550 meters on OM4 fiber..Gigabit Ethernet SFP+ transceiver designed for 10 Gigabit Ethernet networks..Transceiver consumes less than 1 Watt of power, ensuring energy efficiency..Hot-swappable, allowing installation or removal without powering down the device..Module is MSA compliant, ensuring interoperability across multiple vendors..MTBF of over 1,000,000 hours, indicating high reliability and durability..Operates at a wavelength of 850 nm, suitable for short-range multimode fiber links..Product is sold as 1 unit (Each)..Data link protocol: 10 gigabit-ethernet.Adds 10 gigabit-ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfaces.Fits into the two built-in 10 GE SFP+ interfaces of GSM72xxPS / GSM73xxS.Fits into the 10 GE SFP+ interface of SFP+ Adapter module AX743.Certifications and standards: RoHS, UL 1950 CSA 22.2 No. 950.Netgear ProSafe SFP+ Transceiver fits into standard 10GB SFP+ interfaces and provides hot-swappable installation or removal.

This 5-pack of HP J4858C compatible SFP transceivers provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with HP. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Multi-mode fiber mode support for feasible connectivity with added productivity

Each QSFP-40G-SRBD-ENC transceiver operates at over at with a maximum reach of . All ENET OEM Compatible transceivers are MSA compliant for seamless integration and RoHS compliant for environmental conformity. All ENET transceivers are 100% tested in-house for functionality and compatibility and backed by a Lifetime Replacement Warranty. Comments: Marketing information part number was changed for Arista..With 40GBase-X technology, enjoy up to 40Gbps data transfer rate over supported network cable.40Gigabit Ethernet - Designed to provide high-performance Ethernet connection while minimizing power and CPU cycles' utilization.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 100Base-FX technology, enjoy up to 100Mbps data transfer rate over optical fiber cable.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100Mbps for connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

eNet Components offers a full range of compatible transceiver solutions for many of the major manufacturers of network equipment. Our eNet Optics line of compatible transceivers provide a cost-effective, 100% compatible solution to OEM products at a fraction of the price without sacrificing quality or functionality. Our compatible line of transceivers includes GBIC, SFP, SFP+, XFP, X2, and XENPAK products. All of our compatible transceiver solutions are MSA (Multi-Source Agreement) compliant for form, fit, and function in all MSA compliant switching and routing platforms. All products meet IEEE Standards for optimum performance and reliability and are all uniquely serialized to ensure their compatibility and functionality in their specific networking environment. All of our compatible transceiver products are guaranteed to be 100% compatible and are backed by an industry-leading lifetime warranty..With 10GBase-SR/SX technology, enjoy up to 10Gbps data transfer rate over optical fiber cable.Optimize the network's performance with 10 Gigabit Ethernet connectivity.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..1000BASE-SX network technology for reliable connectivity with maximum productivity.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Multi-mode fiber mode support for dependable connectivity with maximum usability

Netgear® ProSafe® AXM763 LC Duplex Gigabit Ethernet SFP+ Transceiver for M5300 Switches.Suitable with M5300, M7100 and M7300 series Managed Switches, SFP+ interfaces of select smart and plus switches.Comes in silver color.Interface/ports: One LC duplex 10GBase-LRM network, SFP+ slot.Media type supported: Optical fiber, Fiber mode supported: Multi-mode, Cable standard: 50/125 u m, 62.5/125 u m.Ethernet technology: 10 Gigabit Ethernet, 10GBase-LRM.Data transfer rate: 10 Gbps, Transfer distance: 853' max.Form factor: Plug-in module

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

Enhance network efficiency with the AddOn 1783-SFP-1GSX-AO SFP Transceiver. Built for convenience and productivity, this module utilizes 1000Base-SX technology to provide up to 1 Gbps data transfer over optical fiber. Featuring a Gigabit Ethernet port for superior speed and multi-mode fiber support, it ensures flexible connectivity and dependable performance for high-demand networking applications..Gigabit Ethernet port delivers superior network performance.Optical fiber compatibility ensures efficient and reliable connectivity.Multi-mode fiber support provides flexible and productive networking.Perfect for high-demand applications requiring fast and dependable data transmission

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..10GBase-SR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.10 Gigabit Ethernet technology for a reliable, convenient way of communication and connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Multi-mode fiber mode support for feasible connectivity with added productivity

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.SFP (mini-GBIC) with data networking application/usage for maximum dependability and convenience

The StarTech® J4858C10PKST SFP (mini-GBIC) transceiver module supports half/full duplex multi mode fiber optic network connectivity. The transceiver module transfers the data over MMF at 1.25-Gbps speed, with a maximum reach up to 550 m at a wavelength of 850 nm using LC connector. This hot pluggable transceiver module provides highly reliable and cost-effective GbE network connections for 1000Base-SX networks and supports digital diagnostic monitoring..100% compatibility with HP J4858C guaranteed.StarTech® SFP modules are backed by a lifetime warranty.Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards.Low power consumption of less than 1 W.Hot-swappable with fiber-optic modules.SFP network transceiver module is ideal for large-scale deployments or installations on multiple devices, this bulk pack of HP compatible gigabit fiber SFPs.

This Intel adapter has one 10GBASE-SR port for your device and offers speeds of up to 10 Gbps, so you can transfer data quickly. The plug-in card is easy to install, and it is hot swappable, so you don't need to restart your computer when you're going to.Interface: 1 x 10GBase-SR.Network adapter speed: Up to 10 Gb/s.Form factor: Plug in card.Ports: 1 x LC.Operating temperature: 0 - 70 deg C.Transmission distance up to 300 m.Application/usage: Optical network, data networking.Hot-swappable.Sub watt power consumption: 0.65 W.3 years limited warranty.Intel Adapter - Networking and Network Adapters

The Transition Networks TN-GLC-FE-100FX small form factor pluggable (SFP) Transceiver modules is designed to install in any SFP port allowing for 100Base-FX interfaces to the network through the SFP connector..Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.Featuring Fast Ethernet port to enhance the data transfer rate by up to 100 Mbps for connectivity.With 100Base-FX technology, enjoy up to 100 Mbps data transfer rate over optical fiber cable

SFP Modules The EnGenius transceiver family not only works with EnGenius Switches, but also follows industry standards to assure compatibility with switches from other manufacturers without barriers set by proprietary technologies. Transceiver modules consists of Gigabit and 10 Gigabit variations..10GBase-SR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Optimize the network's performance with 10 Gigabit Ethernet connectivity.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical Fiber media support for efficient and reliable connectivity.SFP (mini-GBIC) with data networking application/usage for maximum dependability and convenience

This Cisco® WS-G5484 compatible GBIC transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an SC connector. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Multi-mode fiber mode support for reliable, fast transfer, sharing, and access to the data and information.GBIC with data networking application/usage for maximum dependability and convenience

This Meraki Cisco® MA-SFP-1GB-SX compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Meraki Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Cisco Meraki MA-SFP-1GB-SX Compatible.1000Base-SX SFP Transceiver.Media Type: MMF - Wavelength: 850nm - Reach: 550m - Connector Type: LC.100% application tested and guaranteed compatible.Limited Lifetime Warranty.Meraki Cisco® MA-SFP-1GB-SX Compatible TAA Compliant 1000Base-SX SFP Transceiver (MMF, 850nm, 550m, LC, DOM)

The Axiom SFP-10G-SR-AX SFP+ transceiver module supports fiber network connectivity using MMF. The transceiver transfers the data over this MMF at 10GBASE-SR data rate, with a maximum reach of up to 300 m using OM3 and up to 400 m using OM4, at 850 nm wavelength. The transceiver comes with pre-configured specific code to meet the requirements set forth by your router and switch OEMs. This SFP transceiver module is compatible with Cisco Catalyst 2960-S/2960-X/3560-X/3750-X series and Nexus 5000/7000 series..SFP+ transceiver transfers the data over multi-mode fiber.Dimensions: 0.5"H x 0.5"W x 2.2"D.Compatible with Cisco Catalyst 2960-S/2960-X/3560-X/3750-X series, Nexus 5000/7000 series.Network technology: 10GBASE-SR.Interfaces/Ports: 1 x LC.Wavelength: 850 nm.Range: 300 m using OM3 and up to 400 m using OM4.Ethernet technology: 10 Gigabit Ethernet.Media type supported: Multi-mode optical fiber.Form factor: Plug-in module.Eliminates any network communication conflicts and provides easy identification.Fully comply with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms.Meets SFP+ MSA, RoHS, IEEE 802.3z standards.Comes with limited lifetime warranty

The AddOn® QSFP-40G-SR-BD-AO Cisco™ compatible QSFP+ transceiver module supports multi-mode optical fiber network connectivity using Gigabit Ethernet technology. This transceiver module transfers the data over MMF at 40GBase speed, with a maximum reach up to 150 m at a wavelength of 832 to 918 nm, using LC connector. The transceiver module with 40GBase-SR network interface, supports data networking and optical network applications..Hot swappable QSFP+ transceiver module supports multi-mode optical fiber network connectivity.Interfaces/ports: 1 x LC 40GBase-SR.Ethernet technology: 40 Gigabit Ethernet.Network technology: 40GBase-SR.Media type supported: Multi-mode optical fiber.Data transfer rate: 40 Gbps.Operating distance: 150m.Wavelength: 832 - 918 nm.TAA compliant.Comes with lifetime limited warranty

Cisco® Transceiver module features wired connective technology and has 1 x network - ethernet 1000Base-Sx - LC/PC multi-mode x 2 ports for cabling. Transceiver module is compatible with PC..Interfaces/ports: 1 x network - ethernet 1000Base-SX - LC/PC multi-mode x 2.Dimensions: 0.3"(H) x 1/2"(W) x 2.2"(L).Compatability: PC.Connectivity technology: Wired.Wavelength: 850 nm.Operating distance: 0.6 miles.Form factor: Plug in module, hot swappable.Fibre type: Multimode.Cabling type: 1000Base-SX.Cisco® GLC-SX-MMD= Transceiver Module has 1 x network - ethernet 1000Base-SX - LC/PC multi-mode x 2 ports.

The HP® JL309A 100GBase X151 2 strand QSFP28 transceiver module is compatible with HPE Aruba 2930M 24, 2930M 48, 3810, 3810M 24, 3810M 48, 5406R 16, 54XX and 8400 8-slot switches. This 100 Gigabit Ethernet module supports optical fiber. It has MPO multi-mode connector on the left end. This plug-in module transfers data up to a maximum distance of 328'..QSFP28 transceiver module for optical network application.Dimensions: 0.7"H x 0.3"W x 5.2"D.Compatibility: HPE Aruba 2930M 24, 2930M 48, 3810, 3810M 24, 3810M 48, 5406R 16, 54XX and 8400 8-slot switches.Network technology: 100GBase-SR4.Interface/ports: 1 x MPO.Range: 328'.Ethernet technology: 100 Gigabit Ethernet.Media type supported: Optical fiber.Form factor: Plug-in module.Weight: 0.1 lb.Comes with limited lifetime warranty.100GBase X151 2 Strand QSFP28 transceiver module features 1 x MPO connection and supports optical fiber media.

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Fiber Channel network technology for convenient, easy sharing of data and information with maximum feasibility.16 Gigabit Ethernet module - Excellent Ethernet connection with a cost friendly network solution.Optical Fiber media support ensures maximum convenience and great usability.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Optimize the network's performance with 10 Gigabit Ethernet connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.SFP+ with data networking application/usage for maximum dependability and convenience

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Multi-mode fiber mode support for reliable, fast transfer, sharing, and access to the data and information.SFP (mini-GBIC) with data networking application/usage for reliability and maximum efficiency

This Meraki now Cisco® MA-SFP-10GB-SR compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. Our transceiver is guaranteed to be 100% compatible with the equivalent Meraki now Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Meraki now Cisco®, as well as to comply with multi-source agreement (MSA) standards to ensure seamless network integration. We stand behind the quality of our products and proudly offer a limited lifetime warranty. Trade Agreements Act (TAA) versions of this part are available upon request..Duplex LC connector.Support hot-pluggable.Metal with lower EMI.Excellent ESD protection.VCSEL Transmitter and PIN Receiver.Distance up to 300m on 50/125um MMF (OM3).Single 3.3V power supply and Low power dissipation <0.8W.GR-253-CORE compliant.RoHS Compliant and Lead-Free.Compliant with IEEE 802.3ae

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building.SFP+ with data networking application/usage for reliability and maximum efficiency

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..32GBase-SW network technology for reliable connectivity with maximum productivity.32 Gigabit Ethernet for high-speed operation and fast connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

Juniper® Pluggable transceiver module with 62.5 um multi-mode optical fiber connective media at a data transfer rate of 10 Gb/s. Transceiver module has communication range up to 980' and is ideal for data networking and optical networks..Interfaces/ports: 1 x 10Gbase-SR.Compatibility: juniper EX2500 ethernet switch.Connectivity technology: Wired.Application/Usage: Data networking, optical network.Connectivity media: 62.5 um multi-mode optical fiber 10GBase-SR.Data transfer rate: 10 Gbps gigabit Ethernet.Form factor: Hot-swappable.Cabling type: 10GBase-SR.Data link protocol: 10 gigabit Ethernet.Optical wave length: 850 nm.Max transfer distance: 980'.Compatible slots: 1 x SFP+.Warranty: 3 years limited.Juniper® Pluggable transceiver module has 10GBase-SR interface and is compatible with juniper EX2500 ethernet switch.

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Featuring Fast Ethernet port to enhance the data transfer rate by up to 100Mbps for connectivity.Optical Fiber media support for a dependable and productive connectivity.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building.SFP with data networking application/usage for reliability and maximum efficiency

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Typically used for short distance, multi-mode fiber optic is ideal to carry data and transmit audio/video applications within a building

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.SFP (mini-GBIC) with data networking application/usage for maximum productivity and usability

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Multi-mode fiber mode support for feasible connectivity with added productivity

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity.SFP (mini-GBIC) with data networking application/usage for maximum dependability and convenience

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.SFP with optical network application/usage for reliability and maximum efficiency

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Multi-mode fiber mode support for reliable, fast transfer, sharing, and access to the data and information.SFP (mini-GBIC) with data networking application/usage for maximum productivity and usability

Axiom SFP+ Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM) names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Optimize the network's performance with 10 Gigabit Ethernet connectivity.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Multi-mode fiber mode support for reliable, fast transfer, sharing, and access to the data and information.SFP+ with data networking application/usage for reliability and maximum efficiency

Addon SFP transceiver can be deployed with other OEM or 3rd party transceivers to provide seamless network performance. SFP transceiver is 100 percent compliant with all networking product lines..Hard drive accessory type: SFP transceiver.Interfaces/ports: 1 x 100base-FX.Connectivity media: 62.5/125 um multi-mode optical fiber, 50/125 um multi-mode optical fiber.Form factor: SFP.Range: 2 km.Data rate: 100 Mbps fast Ethernet half/full-duplex.Compatibility: Cisco catalyst 3750, 3560, and 2970 series switches.Fiber type: Multi-mode fiber.Application: Data networking.Connectivity: Wired.Transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance.Certifications & Standards: MSA.Warranty: Lifetime limited.Addon® SFP transceiver is a hot-swappable input/output device that plugs into a gigabit ethernet slot and operates at 1310 nm over multi-mode fiber.

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Multi-mode fiber mode support for feasible connectivity with added productivity