Remote Managed PDU

369c974d559b0e9a66354fd4cf16afb7.1.9kW 120V single-phase switched 0U PDU.24 individually controllable NEMA 5-15/20R outlets.Built-in LX Platform interface for 24/7 remote access.Digital ammeter for on-site load monitoring in real time.NEMA L5-20P input with 10 ft. AC power cord and 5-20P adapter

The PDUMV15NETLX 1.4kW Single-Phase Switched PDU provides advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet. Recommended for IT and industrial applications, the vertical PDU features 16 switched NEMA 5-15R outlets with included cord retention brackets to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA 5-15P plug connects the PDU to a compatible AC power source, generator or protected UPS. The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. A digital ammeter allows you to monitor the total load in real time to ensure it remains well below maximum capacity with no danger of overload. The vertical PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access..1.4kW 120V single-phase switched 0U PDU.16 individually controllable NEMA 5-15R outlets.Built-in LX Platform interface for 24/7 remote access.Digital ammeter for on-site load monitoring in real time.NEMA 5-15P input with 10 ft. AC power cord

A dependable solution built for everyday use. Tripp Lite PDU Switched 120V 1.4kW 15A 8 5-15R 5-15P LX Interface 1URM TAA (2KL700). Designed for dependable day-to-day performance in office and IT environments. Simple to integrate and dependable for daily use..With IEEE 802.11ac network technology and data transfer rate of up to 330 Mbit/s, enjoy superior HD media playback and lag-free gaming.Up to 10x faster than standard Ethernet connectivity for your wired network.Helps keep workstations running smoothly with reliable, easy-to-use performance.Great for replacements, spares, and standardizing setups across teams.A dependable accessory for everyday office and IT setups—simple to use and built for daily reliability.

The PDUMV30HVNETLX 5/5.8kW Single-Phase Switched PDU provides advanced network control and remote power monitoring with the ability to turn on, turn off, reboot or lock out power to each outlet. Recommended for any IT or industrial application, it features 24 switched outlets (20 C13 and 4 C19). LEDs indicate each outlet's on/off power status. A 10-foot cord with NEMA L6-30P plug connects the PDU to a compatible AC power source, generator or protected UPS. The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. A digital ammeter allows you to monitor each bank's load in real time to ensure it remains well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access..5/5.8kW 208/240V 30A switched PDU.24 individually controllable outlets-20 C13, 4 C19.Built-in LX Platform interface for remote access.Digital ammeter for on-site load monitoring in real time.NEMA L6-30P input with 10 ft. AC power cord

The PDUMNV30HV2LX 5.8kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. By reducing the frequency of on-site visits, these advanced remote capabilities can save you money and reduce downtime. The 0U PDU features 42 outlets (36 C13 and 6 C19) with included plug-lock insert sleeves to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L6-30P plug connects the PDU to a compatible AC power source, generator or protected UPS. The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. A digital ammeter allows you to monitor each load bank's current and the total connected PDU load in real time to ensure they remain well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access..42 outlets-36 C13, 6 C19-with plug-lock insert sleeves.Built-in Java-free LX Platform interface for remote access 24/7.Digital ammeter for on-site load monitoring in real time.NEMA L6-30P input with 10 ft. AC power cord

A dependable solution built for everyday use. Tripp Lite PDU Switched 208V / 240V 30A 4 C19; 20 C13 LX Platform Vertical 0URM TAA (9A0751). Designed for dependable day-to-day performance in office and IT environments. Simple to integrate and dependable for daily use..With 6 TB capacity you have ample space for storing millions of images, hundreds of hours of video or for music lovers, up to a million songs.12Gb/s SAS interface for high speed and reliability.Helps keep workstations running smoothly with reliable, easy-to-use performance.Great for replacements, spares, and standardizing setups across teams.Monitors power consumption of individual outlets.A dependable accessory for everyday office and IT setups—simple to use and built for daily reliability.

The CyberPower PDU41001, an 8-outlet (front), 1U rackmount switched power distribution unit (PDU), provides 120V 15A output. It distributes power to eight NEMA 5-15R receptacles from a single NEMA 5-15P plug with unfiltered electrical pass-through. The switched outlet receptacles can be managed individually or collectively over the network, using the CyberPower Management Console, a web browser, and the RJ45 Ethernet port for network connection, or locally by using the LCD controls..Delivers AC power to servers, equipment, and connected devices via a power distribution unit.Nominal input voltage 100-120VAC.Provides 100-120V 15A output.Dimensions: 1.75"H x 17.05"W x 4.41"D.Single NEMA 5-15P plug with unfiltered electrical pass-through.Distributes power to eight NEMA 5-15R receptacles.Provides local and remote control for individual and multiple outlets.Allows for installation of the PDU in the following configurations: 0U (vertical, under counter, and wall mount), 1U (horizontal, vertical, under counter, and wall mount), and 2U (horizontal and wall mount).Included: four mounting brackets (two short and two long), 10 flat head M4x8 bracket mounting screws, cord retention tray, 10 cable ties, 6 M3x6 cord retention tray mounting screws, six M5x12 screws, six washers, RJ45/DB9 serial port connection cable, user manual, registration card, CD.3-year manufacturer limited warranty

The ATS will maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails, the ATS will switch over to the secondary power source until primary input is restored and stable..Single phase IEC-320 C20 12' 20 A 200 - 240 V input.200 - 240 V 50/60 Hz output.Outlet connector: 8 IEC-C13, 2 IEC-C19.1U horizontal rack mount.Package includes: switch, metered PDU with ATS support, set of 2 C19 to C20 12'/ 3.7 m power cables, user manual with warranty information.2 digit display reports power consumption in amps.ATS circuits normally maintain output sourced from the primary input cable, as primary input power fails, the ATS will switch to maintain output sourced from the secondary input cable until power on the primary input is restored and stable.2 - 7 ms transfer time.Switched outlets and ethernet interface supports individual outlet control on a real-time or programmable basis and user-specified alarm notification thresholds for all reported site power conditions.DHCP/Manual configuration support.Supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Outlets are factory programmed for sequential turn-on at 250 ms intervals when the PDU is first energized.LEDs confirm power availability on both input lines and for each output receptacle.Typical applications: Ideal for configurations requiring a simple PDU that displays power consumption in amps.Certifications: Tested to UL 60950 (USA, canada), CE (europe), class A (emissions), NOM (mexico), RoHS complaint.Weight: 10.3 lbs..Dimensions: 1.72"(H) x 17.3"(W) x 14.8"(D).2 years limited Mrf. warranty.Tripp Lite Sigle Phase Switched Power Distribution unit provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources.

TRIPP LITE Switched Horizontal Rack PDU enables remote reboot of unresponsive network hardware and prevents overloading of systems. It ensures convenient operation of IT systems that are interdependent..PDU Plug Type: L5-20P.Outlet Type: PDU Switch.Form Factor: Horizontal Rackmount.PDU Input Voltage: AC 100 - 127 V.TRIPP LITE Switched Horizontal Rack PDU - Ensures convenient operation of IT systems that are interdependent

The APC® AP8632 metered-by-outlet with switching rack power distribution unit features 24 NEMA 5-20R output receptacles for connectivity. It provides remote individual outlet control to remotely manage outlets. This PDU has local current monitoring display to monitor current drawn by the circuit. It offers real power monitoring and a temperature/humidity sensor port. Through secure Web, SNMP or Telnet interfaces, one can access, configure and control switched rack PDUs..Power distribution unit provide active metering of individual outlets and remote on/off switching control of individual outlets.Dimensions: 72"H x 2.2"W x 2"D, 10' cable.Comes in black color.Receptacles: NEMA L5-30P (input), 24 NEMA 5-20R (output).Power: 2.88 kVA, 30 A, 120 VAC.Form factor: Rack-mountable, vertical.Management: Web, SNMP and Telnet.Frequency: 50/60 Hz.Environmental conditions: 23 - 113 deg F, 5 - 95% (humidity).Firmware upgradable and offers overload protection.Includes installation guide, rack mounting brackets, safety guide and serial configuration cable.Meets cUL, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL listed, RoHS, REACH certifications and standards.Weight: 17.71 lbs..Comes with 2 years warranty.Includes installation guide, rack mounting brackets, safety guide, serial configuration cable.Certifications and standards: cUL Listed, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL Listed, RoHS, REACH.Weight: 8.05 Kg.Warranty: 2 years repair or replace.APC® Rack power distribution unit offers advanced power control with individual power metering and is rack-mountable.

TRIPP LITE 5-15R 8 Outlet 15 A 100 - 127 V Switched Power Distribution Unit provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. It enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. The ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. The front input LED's display primary or secondary power availability..Single phase NEMA 5-15P 12 ft 15 A 100 - 127 V input.120 V 60 Hz output.8 NEMA 5-15R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached 5-15P input power cord, detachable C13 to NEMA 5-15P 12 ft/3.6m secondary input cord, installable 1U mounting brackets, user manuals with warranty information.Visual meter reports output power consumption in amps.ATS features provide redundant power for critical network equipment with a single input power cord.Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface.Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported.2-7 millisecond transfer time between primary and secondary inputs.Front panel LEDs confirm power availability on primary/secondary inputs and each output receptacle.ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each input is connected to a separate UPS system.On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is first energized.Typical applications: ATS PDU systems provide a redundant power option with individual outlet control for single-corded network devices.DHCP/Manual configuration support, supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Certifications: Tested to UL 60950-1 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS compliant.11 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.TRIPP LITE 5-15R 8 Outlet 15 A 100 - 127 V Switched Power Distribution Unit's ATS features provide redundant power for critical network equipment with a single input power cord.

Tripp Lite Switched PDU offers advanced network control and monitoring with the ability to turn on and off. PDU features 16 switched outlets that can be controlled in real-time to remotely reboot unresponsive network hardware..Input voltage: 120 VAC.Output voltage: 120 VAC.Supports power-on, power-off or reboot of each outlet on a real-time or programmable basis.PDU type: Switched.Frequency: 50/60 Hz.Input receptacles: NEMA 5-15P.Output receptacles: 16 x NEMA 5-15R.Form factor: Horizontal rackmount, vertical rackmount.Dimensions: 1 3/4"(H) x 17 1/2"(W) x 15 1/2"(D).Appearance: Black 1U rackmount steel chassis.Management protocols: HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP, BOOTP, NTP.Front panel LEDs: 16 LEDs display power on - off status for each outlet, digital current meter display shows total output power consumption in amps.Includes: Switched PDUMH15NET 16-outlets PDU, installable 1U mounting brackets, PowerAlert software CD, cord retention Bbrackets, user manual.Certifications: Tested to UL 60950-1 (USA, Canada), class A (Emissions), NOM (Mexico), RoHS compliant.Weight: 12.5 lbs..Warranty: 2 years limited.Tripp Lite Switched PDU has input/output AC voltage of 120 V and maximum input current of 15 A operating at a frequency of 60 Hz and weighs around 12.5 lbs.

Eaton is an intelligent power management company dedicated to improving the quality of life and protecting the environment for people everywhere..Single-phase managed rack power distribution unit.Nominal input voltage: 120V; frequency: 50/60Hz.Amperage rating: 12A.Dimensions: 8"H x 1.69"W x 19"D.Features eight 5-20R outlets.Equipped with a 10' cable.3-year manufacturer limited warranty

Schneider® AP8832 APC® Electric Metered rack power distribution unit with 24 outputs offer active metering to allow energy optimization and circuit protection. User-defined alarm reduces the risk with real-time local and remote alerts to warn of potential circuit overloads. Includes ultra low profile circuit breakers, real power monitoring, a temperature/humidity sensor port and locking IEC receptacles. Has a nominal input voltage rating of 100/120 V and frequency rating of 50/60 Hz. Operates at a temperature range of -5 to 45 deg C..Power distribution unit offer active metering to enable energy optimization and circuit protection.Measures 1791 mm x 55 mm x 44 mm.Comes in black color for new look.Features input voltage rating of 100V, 120V and input frequency of 50/60 Hz for reliable operation.Output voltage rating of 100 V, 120 V and 24 x NEMA 5-20R output connections.Local digital display helps installers avoid overloaded circuits.Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space.Full-featured network management interfaces that offer standards-based management via Web.Operating environment of -5 - 45 deg C, operating relative humidity of 5 - 95percentage and operating elevation of 0-3000 meters for better performance.Alarm threshold avoids overloaded circuits.LED indicator indicates overload and warning conditions based on the user-defined alarm thresholds.Integrates with StruxureWare data center expert for added flexibility.Easily upgrade firmware via network download for future product enhancements.Contains horizontal, vertical and toolless-mount varieties.Meets cUL Listed, FCC Part 15 Class A, ICES-003, PSE, UL 60950-1, UL certification and standards.Weighs 6.67 kg.Comes with 2 years limited warranty.Schneider® Electric Metered rack power distribution unit offers real-time remote monitoring of connected loads. Has a nominal output voltage rating of 100/120 V.

SCHNEIDER ELECTRIC IT USA™ 0U Rack PDU offers an ability to analyze the component power trends and performs capacity planning. Includes load indicator LED for quick indicating of overload and warning conditions. Effortlessly distributes the critical alerts, surveillance video/key information. With an input current of 30 A this PDU provides an output voltage of 200/208 V at a frequency of 50/60Hz. Network and visual alarms helps to inform the user with possible problems. Provides overload protection and has 21 IEC 320 C13, 3 IEC 320 C19 output connections..Power distribution unit distributes power from NEMA L6-30 to 21 x power IEC 320 EN 60320 C13, 3 x power IEC 320 EN 60320 C19 connectors.Measures 4 1/2" x 80 1/4" x 6 1/2".Comes in black color for attractive look.Requires an input voltage of 200 - 240 V at 24 A for better operation.Operates at a frequency of 50/60 Hz.IEC-320 c13 IEC-320 c13/ IEC-320 C19 output connector to effectively distribute power.Single power cord with maximum line current of 30 A for high performance.Delivers output voltage of 200 - 208 V for better performance.Offers granular view of power distributed to equipment and analyze component power trends as well as capacity planning.Network management capabilities allow users to access, configure, manage rack PDUs from remote locations to save valuable time.Alarm thresholds avoid overloaded circuits and inform the user of possible problems.Operates at -5 - 45 deg C temperature for superior operation.Comes with 2 years of repair or replace warranty.SCHNEIDER ELECTRIC IT USA™ 0U Rack PDU with 200/208 V output voltage and 30 A input current offers high-performance. Easily distributes power from NEMA L5-30P plugs.

Eaton Metered Input ePDUs provide remote monitoring of the current draw of individual sections via network communication. This capability, combined with state-of-the-art software allows you to aggregate the information from many ePDUs in one location. A local display is also available for phase balancing and for easy start-up and provisioning of servers. New ePDU G3 Metered Input models feature best-in-class technologies, including ±1% billing grade accuracy, an advanced LCD pixel display, a hot-swap meter and the ability to daisy chain four ePDUs to share the same network connection and IP address..Network (RJ-45): Yes.Input Voltage: 230 V AC.Output Voltage: 230 V AC

The Eaton® EMA108-10 G3 managed Power distribution unit in black, provides a billing grade accuracy monitoring at the outlet level on a local LCD pixel display or over a network connection. The high accuracy meter will measure voltage, current, power and energy for load balancing, capacity planning, efficiency monitoring and energy usage reporting..Power distribution unit offers a range of basic and metered PDUs for any application.Dimensions: 66.5"H x 2.05"W x 2.56"D.Comes in black color.Input: (1) NEMA L5-30P, output: (24) NEMA 5-20R.Input current: 24 A, frequency: 50 - 60 Hz.Input voltage: 120 V, output voltage: 120 V, single phase.Form factor: Vertical.Rack height: 0U.Serial interface: RS232, Ethernet interface: 10/100 Ethernet.Cable length: 10'.Outlet control, voltage monitoring, current monitoring: Input, section, outlet, +/- 1%.Enables on/off/reboot capabilities for a single piece of equipment with outlet-level control.Circuit breakers: (2) 20 A.Manages entire environment remotely over the network from a single interface.Meets UL, cUL standards

Single phase NEMA 5-20P / NEMA L5-20P 12 ft 20 A 100 - 127 V input.120 V 60 Hz output.16 NEMA 5-15/20R outlet connector.1U horizontal rack mount form factor.Package includes PDU with attached L5-20P input power cord, detachable C19 to NEMA L5-20P 12 ft/3.6m secondary input cord, two NEMA L5-20R to NEMA 5-20P plug adapters, installable 1U mounting brackets, user manual with warranty information.Visual meter reports output power consumption in amps.ATS features provide redundant power for critical network equipment with a single input power cord.Switched PDU features enable programmable or real-time power control of individual outlets via built-in network interface.Advanced ATS configurations using separate mains circuits, backup generators and out of phase utility feeds are fully supported.2-7 millisecond transfer time between primary and secondary inputs.Front panel LEDs confirm power availability on primary/secondary inputs and each output receptacle.ATS configurations enable hot-swappable UPS protection when used with a single UPS and redundant UPS protection when each input is connected to a separate UPS system.On-board processor evaluates power quality on both inputs to prevent transfer to the secondary source when unavailable or of lower quality than the primary source.Outlets are factory programmed for sequential turn-on at 250 millisecond intervals as the PDU is first energized.Typical applications: ATS PDU systems provide a redundant power option with individual outlet control for single-corded network devices.DHCP/Manual configuration support, supports HTTP, HTTPS, PowerAlert network management system, SMTP, SNMPv1, SNMPv2, Telnet, SSH, FTP, DHCP, BOOTP, NTP protocols.Certifications: Tested to UL 60950 (USA, Canada), Class A (Emissions), NOM (Mexico), RoHS complaint.12.2 lbs.1 3/4"(H) x 17 1/2"(W) x 14 1/2"(D).2 years limited warranty.2 years limited warranty.TRIPP LITE 5-15/20R 16 Outlet 20 A 100 - 127 V Switched Power Distribution Unit's ATS features provide redundant power for critical network equipment with a single input power cord.

The Eaton G3 EMA107-10 single-phase managed ePDU facilitates billing grade accuracy monitoring of input and branch circuits on a local LCD pixel display or over a network connection. The high accuracy meter of this ePDU, is perfect for measuring current, voltage, power and energy for load balancing. It also measures capacity planning, efficiency monitoring and energy usage reporting. This ePDU uses a daisy chain that allows four ePDUs to share the same network connection and IP address. It can operate in high operating temperature environments up to 140 degrees F, and has an input and output voltage rating of 230 VAC and power rating of 5.76 kVA..Enclosure power distribution unit offers reliable and cost effective power distribution.Dimensions: 66.5"(H) x 2.1"(W) x 2.1"(D).Receptacles: one NEMA L6-30P input, 20 x IEC 60320 C13 and four IEC 60320 C19 output.Voltage: 230 VAC input/output at 50/60 Hz, Input current: 24 A, Circuit breakers: (2) 20 A.Output capacity: 5.76 kW.Input cord length: 10'.Form factor: Vertical (0U).Has high accuracy meter that measures current, voltage, power and energy for load balancing, capacity planning & energy usage reporting.High operating temperature (140 deg F/60 deg C) for containment or hot network closet environments.Outlet switching allows for on/off/reboot of individual outlets reducing the cost of managing remote or local IT data center environments.IEC outlet grip plug retention secures plugs in place using standard cables.Has outlet switching for on, off and reboot control to minimize management costs and outlet level metering to +/- 1 percent billing grade accuracy.Daisy chain of IP addresses enables four devices to share one network connection to minimize up to 75 percent network installation costs.cUL Certified

The Eaton ® EMI310-10 G3 monitored ePDU facilitates billing grade accuracy monitoring of input and branch circuits on a local LCD pixel display or over a network connection. The high accuracy meter of this ePDU, is perfect for measuring current, voltage, power and energy for load balancing, capacity planning, efficiency monitoring and energy usage reporting. It is great for IT and data center applications. This ePDU incorporates daisy chain that allows four ePDUs to share the same network connection and IP address. It can operate in high operating temperature environments up to 140 deg F. This ePDU has a input voltage rating of 120/208 V and power rating of 8.64 kVA..Enclosure power distribution unit offers reliable and cost effective power distribution.Dimensions: 66.5"(H) x 2.1"(W) x 2.1"(D).Receptacles: NEMA L21-30P input, 30 x IEC 60320 C13, six IEC 60320 C19, one NEMA 5-20R output, 10/100 Ethernet interface, Serial interface: RS232.Voltage: 120/208 VAC input at 50/60 Hz, Input current: 24 A, Circuit breakers: (3) 20 A.Output capacity: 8.64 kW.Input cord length: 10'.Form factor: Vertical (0U).Has high accuracy meter that measures current, voltage, power and energy for load balancing, capacity planning & energy usage reporting.High operating temperature (140 deg F/60 deg C) for containment or hot network closet environments.Perfect for IT and data center applications.Allows +/- 1 percent billing grade accuracy for high accuracy reporting of energy usage.Advanced LCD pixel display is perfect to display current, voltage, power and menu setup of parameters including IP address or display rotation.Hot-swap meter offers easy serviceability without removing power to the rack.Meets UL ITE 60950-1 and FCC standards or certifications