SFP Adapters

The Cisco multi-mode rugged SFP module adapts your switch or router, enabling you to connect long-range cables. As a result, you can extend the range of your network and expand connectivity. The SFP module is made with an intuitive design that is easy to install and use, so you can expand your network quickly and with minimum hassle..Interfaces/ports: 1 x LC duplex 100Base-FX.Dimensions: 0.33"(H) x 0.52"(W) x 2.22"(D).Compatibility: Cisco 100 m Ethernet SFP Compatibility matrix.Connectivity technology: Wired.Optical wave length: 1310 nm.Temperature: 122 deg F max operating.Compliant standards: IEEE 802.3, IEEE 802.3ah.Connectivity media: Multi mode fiber 100Base-FX.Max transfer distance: 1.2 miles.Data transfer rate: 100 Mbps fast ethernet.Form factor: Hot-swappable.90 days limited warranty.Cisco Multi-Mode Rugged SFP Module - Hot-Swap Capability

Cisco™ CVRQSFPSFP10G QSFP to SFP/SFP+ Module Adapter for Cisco™ Ethernet transceiver modules.Module adapter offers flexible Gigabit Ethernet connectivity.Dimensions: 0.53"H x 0.72"W x 3.07"D.Suitable with Cisco 40-Gigabit Ethernet transceiver modules.Interface/ports: QSFP, one SFP/SFP+.Has USB interface.Sensitivity: 93.6 dB SPl at 1 kHz (speaker), -48 to -44 dB at 1 kHz (microphone).Frequency response: 150 Hz to 7 kHz (speaker), 100 Hz to 10 kHz at 6 dB (microphone).Impedance: 32 +/- 4.8 Ohms speaker.Power source: USB.Dimensions: 28 mm x 3.9 mm speaker.Input power: 5 mW at 0.4 V, max input: 10 mW at 0.56 V.Has wideband headset bandwidth, electret condenser microphone, corded mono headset for VoIP softphone.Features wideband speaker bandwidth music mode, wideband speaker bandwidth speak mode and wideband microphone bandwidth.Temperature: -10 to 50 deg C (operating), -30 to 80 deg C (storage), leatherette ear cushions.Features HD voice, PeakStopTM technology, UC plug-and-play, HiFi sound, remote call control/easy call management, Jabra software compatible.Includes Jabra Evolve 20/20SE headset, warning leaflet, warranty leaflet, Quick start guide, USB controller.Meets CE, FCC, KCC, RCM, UL (Regulatory Approvals) MS Lync, Avaya, Cisco(Industrial certifications) standards.Weight: 0.38 lbs..Comes with 2 years warranty

The StarTech MCM10GSFP2 is a high‑performance 10GbE copper‑to‑fiber media converter designed to extend network reach and upgrade existing infrastructure with seamless RJ‑45 to SFP+ connectivity. It converts 2.5G/5G/10GBASE‑T copper Ethernet to 10GBASE‑X fiber through an open SFP+ slot, supporting both multi‑mode and single‑mode SFP+ transceivers such as 10GBASE‑SR or 10GBASE‑LR for flexible deployment across enterprise, telecom, and data‑center environments. Built for reliability and versatility, it supports jumbo frames up to 16K, auto‑negotiation, full‑duplex flow control, and auto MDI/MDI‑X, ensuring smooth integration with mixed‑speed networks. Its compact design allows installation as a standalone unit or mounting on walls, racks, DIN rails, or chassis systems, making it suitable for structured wiring closets and remote network extensions. With low power consumption of just 5.3W via a 5V DC adapter, the device operates efficiently within 0°C to 50°C and includes LED indicators for quick diagnostics. Designed for professional environments, the MCM10GSFP2 delivers stable, plug‑and‑play 10Gbps performance and includes a universal power supply and quick‑start guide for effortless deployment..Delivering reliable wired Ethernet performance, the device supports RJ‑45 copper and SFP+ fiber interfaces along with full Gigabit and multigigabit capability..Delivering high throughput, the data transfer rate reaches up to 10,000 Mbps..Providing essential connectivity, the port configuration includes one RJ‑45 port and one SFP+ slot..Supporting multi‑network environments, compatibility extends to any 2.5G/5G/10GBASE‑T copper device and any 10GBASE‑X SFP+ fiber device..Adhering to global norms, certifications and standards include IEEE 802.3, TAA compliance, and RoHS3 compliance..Limited 2-Year Manufacturer Warranty.

The Cisco SFP-10G-LR-S= SFP+ module measuring 0.3" x 0.5" x 2.2", supports a link length of 10 km on standard single-mode fiber. It has LC/PC duplex 10GBase-LR network interface for optimal connectivity. This hot-swappable module transmits data over optical fiber media..SFP+ module is suitable for SMF.Dimensions: 0.3"H x 0.5"W x 2.2"D.Has one LC/PC duplex 10GBase-LR network port for connectivity.Supports 10 Gigabit Ethernet technology for high speed connectivity.Supports single-mode fiber.Optical fiber media for quick data transfer.Network technology: 10GBase-LR.Form factor: Hot-swappable.Perfect for both data and optical networking.Weight: 2.65 oz..Comes with 1 year limited warranty

Cisco™ 1000BASE-EX SFP Transceiver module is hot-swappable and supports a 1310 nm wavelength signaling. Module operates on standard SMF optic link that spans up to a distance of 40 km..Interface/ports details: 1 x 1000Base-EX network.Media and performance: G.652 micrometer single mode optical fiber.Ethernet technology: 1 Gbps gigabit ethernet.Dimensions: 0.3"(H) x 0.5"(W) x 2.2"(D).Application/usage: Data networking.Form factor: Hot swappable.Wavelength: 1310-nm, Reach: 40 km.Compatibility: Cisco ME 3400 series ethernet access switches, Cisco catalyst 3750 metro series switches.Weight: 2.65 oz..Warranty: 90 days limited.Cisco™ 1000BASE-EX SFP Transceiver module is designed to connect a gigabit ethernet port to a network and has dual LC/PC single mode connectors.

Juniper® Pluggable transceiver module with 62.5 um multi-mode optical fiber connective media at a data transfer rate of 10 Gb/s. Transceiver module has communication range up to 980' and is ideal for data networking and optical networks..Interfaces/ports: 1 x 10Gbase-SR.Compatibility: juniper EX2500 ethernet switch.Connectivity technology: Wired.Application/Usage: Data networking, optical network.Connectivity media: 62.5 um multi-mode optical fiber 10GBase-SR.Data transfer rate: 10 Gbps gigabit Ethernet.Form factor: Hot-swappable.Cabling type: 10GBase-SR.Data link protocol: 10 gigabit Ethernet.Optical wave length: 850 nm.Max transfer distance: 980'.Compatible slots: 1 x SFP+.Warranty: 3 years limited.Juniper® Pluggable transceiver module has 10GBase-SR interface and is compatible with juniper EX2500 ethernet switch.

This product is Guaranteed 100% Compatible with the Manufacturer Original..Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Optimize the network's performance with 10 Gigabit Ethernet connectivity.With 10GBase-LR technology, enjoy up to 10Gbps data transfer rate over optical fiber cable.Noise cancelling, noise reduction and DECT wireless technology helps you to get best possible audio experience.Form factor: Supra-aural, Earpiece type: Binaural, Sound mode: Stereo.Compatible with desk phone and PC.Features acoustic voice activity detector, adjustable headband, high-resolution audio, In-line controller, in-line remote and padded ear cup.Fiber type: Single mode.Cabling type: Ethernet 10GBase-LR.Warranty: 1 year limited.Safety Data Sheet.Juniper® EX-SFP-10GE-LR Transceiver Module delivers operational efficiency, business continuity, and agility, enabling customers to invest in innovative business initiatives that increase revenue and help them gain a competitive advantage.

This Cisco® SFP-MX compatible SFP transceiver provides 1000Base-MX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Cisco® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Cisco®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Multi-mode fiber mode support for reliable, fast transfer, sharing, and access to the data and information

Enhance your network infrastructure with the D-Link DIS-S310LX SFP Transceiver, built for long-distance, high-performance connectivity. Featuring 1000Base-LX technology, this module provides up to 1 Gbps data transfer over optical fiber. Single-mode fiber support ensures minimal signal loss across extended distances, making it ideal for transmitting data at gigabit speeds over hundreds of miles with exceptional reliability..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch cord is required for applications over OM3..SFP+ module is perfect for data networking, optical network.Dimensions: 0.3"H x 0.5"W x 2.2"D.Compatible with A9K-16T/8-B=, ME-3600X-24FS-M=, ME-3600X-24TS-M, N7K-F132XP-15=, N7K-M132XP-12L, WS-X45-SUP7-E/2 networking products.Interface/ports: 1 x LC duplex 10GBase-LRM network.Media type supported: Optical fiber, fiber mode supported: Multi-mode, single-mode, Ethernet technology: 10 Gigabit Ethernet.Maximum data transfer rate: 10 Gbps.Form factor: Hot-swappable, plug-in module.Up to 980', fiber optic cable standard: 62.5 ohm m, 50 ohm m, wavelength: 1300nm.Supports link lengths of 220m on standard fiber distributed data interface (FDDI) grade multimode fiber (MMF).Temperature range: 32 - 158 deg F.Transmit power: -6.5 to 0.5 dBm.Receive power: -8.4(in average) and -6.4 (in OMA) - 0.5 dBm.Connectivity media: 62.5 um, 50 um multi-mode fiber 10GBase-LRM, single-mode fiber 10GBase-LRM.Power consumption: 1 W.Core size: 62.5 - G.652 microns.Cable distance: 220 - 300 m.Cable type: MMF and SMF.Transmit and receive wave length: 1260 - 1355nm.Compliant standards: IEEE 802.3ae, IEC 60825-1, laser class 1.Warranty: 90 days limited.10GBase-LRM SFP transceiver module supports link lengths of 220 m on standard fiber distributed data interface (FDDI) grade multimode fiber (MMF).

This Allied Telesis® AT-SPLX10/I compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Allied Telesis®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical Fiber media support for efficient and reliable connectivity.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

Optical Transceivers Optical transceivers are an integral part of fiber optic networks for data communication, Ethernet LAN, and Fiber Channel applications. ENET offers the most diverse and comprehensive compatible transceivers available..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Single-mode fiber mode support for feasible connectivity with added productivity

SFP Modules The EnGenius transceiver family not only works with EnGenius Switches, but also follows industry standards to assure compatibility with switches from other manufacturers without barriers set by proprietary technologies. Transceiver modules consists of Gigabit and 10 Gigabit variations..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

Optical transceivers are an integral part of fiber optic networks for data communication, Ethernet LAN, and Fibre Channel applications. ENET offers the most diverse and comprehensive compatible transceivers available. ENET conducts the most comprehensive validation and testing procedures in the industry. All ENET OEM compatible transceivers are certified for functionality, reliability, and performance under rigorous testing parameters. Every transceiver is RoHS and MSA (Multi-Source Agreement) compliant and meet IEEE Standards for optimum performance and reliability. All ENET transceivers are built using Tier 1 grade components and lasers and individually tested in their intended application and are guaranteed compatible with identical functionality to OEM products. Our test lab contains the most extensive and complete compilation of network switches, routers, and devices for development, testing, and support. By having these test devices in-house, it guarantees 100% compatibility and reliability in all of today's most popular network platforms. All ENET transceivers are backed by an industry-leading lifetime replacement warranty and technical support..10GBase-SR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Optimize the network's performance with 10 Gigabit Ethernet connectivity.SFP+ with data networking application/usage for maximum dependability and convenience

The AT-2911 Series Gigabit Ethernet Network Adapters are integrated Ethernet network interface cards based on Broadcom's BCM5718 chipset with a PCI Express (PCIe) x1 version 2 interface. The AT-2911 series adapter connects a PCIe compliant computer to a Gigabit Ethernet network. Allied Telesis offers models equipped with a single port interface or dual port interface in the AT-2911 series. The AT-2911 adapter is equipped with single or dual fiber optic connector, copper connector, SFP slot, or a combination of these connectors..This Gigabit Ethernet card guarantees a replacement networking interface to client, server or workstation.Enjoy superfast data transfer of up to 250 MB/s with PCI Express x1 card, between the network card and motherboards.With the 1000Base-X technology get up to 1000Mbps data transfer rate over the supported network cable

The Cisco™ GLC-TE= Gigabit Ethernet SFP transceiver module is suitable for 7700 F3-series, 9372PX and 9396PX Cisco Nexus series switches. This SFP transceiver module has RJ-45 1000Base-T network LAN ports for connectivity. It supports twisted pair media for reliable data transfer..SFP transceiver module for 7700 F3-series, 9372PX and 9396PX Cisco Nexus series switches.Color: Silver.Connectors: One RJ-45 1000Base-T network LAN.Media type supported: Twisted pair.Ethernet technology: Gigabit Ethernet

The Cisco SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor. This short reach module supports a link length of up to 300/400m over OM3/4 at 10G, and up to 300/400m over OM3/4 at 25G. It also supports link lengths of 82m over OM2 at 10G, and up to 70m over OM2 at 25G. This module requires RS-FEC on the host port for full reach operation at 25G. Using BASE-R FEC the module can support 70/100m over OM3/4 and with-out FEC it can support 30/50m over OM3/4 at 25G. For 10G operation FEC is not required..This module offers high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications.Wavelength: 850nm.Supports FCoE with the appropriate host s/w support.Features dual LC/PC connector

The Cisco 10GBASE SFP+ module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications..Transceiver module gives you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.Comes in gray.Power consumption: 0.1W.Compact 10G form factor for great density per chassis.Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing).Supports “pay-as-you-populate” model for investment protection and ease of technology migration.Digital optical monitoring for strong diagnostic capabilities.Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link.5-year manufacturer limited warranty

HPE Gen10 Plus Ethernet Adapters HPE ProLiant DL, ML and Apollo Driven by hybrid cloud services, mobile data and streaming video applications, IT professionals are constantly challenged to deliver secure and reliable network bandwidth that cost-effectively scales to demands of the networking traffic. For any given workload, the right mix of performance, efficiency, reliability and security are paramount. HPE has your data center infrastructure covered with the latest networking adapters, switches, transceivers and cables for a complete end-to-end solution to support your various workload needs. With Gen10 Plus ProLiant Servers, HPE is offering the industry's most secure server platform. Through its Root of Trust server design down to the Network Interface Card (NIC), these security features are built-in so you can deploy with confidence. HPE Gen10 Plus servers will help prevent, detect and recover from cyberattacks such as denial of service and malware-infected firmware. Protecting applications, data and infrastructure from security breaches through storage and networking security technologies is first priority for HPE Gen10 Plus Servers..Enjoy superfast data transfer of up to 8000 MB/s with PCI Express 3.0 x8 card, between the network card and motherboards.For high bandwidth connectivity, add this efficient dual port 10gigabit ethernet card to your server or workstation.Supports optical fiber cable to span longer distances and provides data transmission rates par excellence between servers and network components.With the 10GBase-X technology get up to 10Gbps data transfer rate over the supported network cable

This Accadian® 7SV-000 compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It can operate at temperatures between 0 and 70C. This TX module supports 10/100/1000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Accadian®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 100/1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable.Gigabit Ethernet port for ultra-fast network speeds.Supports cost-efficient twisted pair cables for high-speed data transfer up to 100 meters.SFP (mini-GBIC) with data networking application/usage for maximum dependability and convenience

If your current port density doesn't quite meet your needs, upgrade your system with the Juniper SFP-1GE-SX SFP module. This hot-pluggable piece boasts a wavelength that extends anywhere from 830 nm to 860 nm and has an impressive launch power that typica.1 x 1000Base-SX.Optical interface: Multi-mode.Interface: 1 x SFP.Data transfer rate: 1000 Mbps.Form factor: Plug-in module.Network technology: 1000Base-SX Gigabit Ethernet.Average launch power: -9.5 through 0 dBm, Average receive power: -17 through 0 dBm.Maximum distance: 62.5/125 MMF cable: 656', 50/125 MMF cable: 1640'.Transmitter wavelength: 770 through 860 nm.Receiver sensitivity: -17 dBm.500 m reach on 50/125 micrometer MMF.Wavelength: 830 to 860 nm.SNMP: V 1.Average launch power: -9.5 to -4 dBm.Receiver saturation: -3 dBm.Form factor: Small.Juniper SFP-1GE-SX Gigabit Ethernet SFP Module - Wired Connection

This Accedian® 7XV-000 compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It can operate at temperatures between 0 and 70C. This TX module supports 10/100/1000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Accedian®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable.Gigabit Ethernet port for ultra-fast network speeds.SFP with data networking application/usage for maximum productivity and usability

Supports twisted pair cables for durability and improved signal transfer while ensuring smooth and seamless data transfer.Gigabit Ethernet port for ultra-fast network speeds.With 10/100/1000Base-TX technology, get up to 1000Mbps data transfer rate over twisted pair cable

This Cisco SFP-10G-T-CAT compatible SFP+ transceiver provides 100/1000/10000Base-TX throughput up to 30m over a copper connection via a RJ-45 connector. This TX module supports 100/1000/10000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..100/1000/10000Base-TX network technology for fast, dependable connectivity with maximum efficiency.Optimize the network's performance with 10 Gigabit Ethernet connectivity.Twisted Pair media support ensures maximum convenience and great usability.SFP+ with data networking application/usage for maximum dependability and convenience

ENET Solutions, Inc. offers the most complete line of OEM compatible network peripherals spanning across more than 50 manufacturers. We specialize in OEM compatible optics, direct-attach cables (AOC/DAC), fiber and copper patch cables, media converters, along with switch, router, and server memory. ENET compatible products provide a cost-effective, 100% guaranteed compatible solution compared to OEM products at a fraction of the price without sacrificing quality or functionality. ENET offers unparalleled quality by performing the most complete and comprehensive testing in the industry. Each optic is individually tested at 100% capacity in the latest network traffic generating equipment for latency, packet loss, frame errors, transmit power (Tx) and receive power (Rx). All ENET transceivers are individually serialized and programmed for their specific application and undergo testing in those specific platforms to ensure 100% compatibility and functionality. Programming involves specific values and algorithms to ensure proper operating software recognition and seamless integration with original OEM and other NON-OEM transceivers. ENET compatible transceiver solutions meet IEEE Standards for optimum performance and reliability as well as RoHS and MSA (Multi-Source Agreement) compliant for form, fit, and function in all MSA compliant switching and routing platforms. All ENET products are backed by a lifetime warranty and are available in TAA compliant versions..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Optimize the network's performance with 10 Gigabit Ethernet connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.SFP+ with optical network application/usage for maximum dependability and convenience

This Cisco® SFP-10G-LR-S compatible SFP+ transceiver provides 10GBase-LR throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Optimize the network's performance with 10 Gigabit Ethernet connectivity.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

This Avago® ABCU-5710RZ compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It can operate at temperatures between 0 and 70C. This TX module supports 10/100/1000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Avago®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-TX technology, get up to 1000Mbps data transfer rate over twisted pair cable.Gigabit Ethernet port for ultra-fast network speeds.Hot-swappable form factor for added reliability and dependability.SFP (mini-GBIC) with data networking application/usage for maximum dependability and convenience

This Cisco® GLC-T-10G compatible SFP+ transceiver provides 100/1000/10000Base-TX throughput up to 30m over a copper connection via a RJ-45 connector. This TX module supports 100/1000/10000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..100/1000/10000Base-TX network technology for convenient, easy sharing of data and information with maximum feasibility.Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Hot-swappable form factor allows hassle-free and easy usage with increased efficiency.SFP+ with data networking application/usage for maximum productivity and usability

This Sonicwall® 01-SSC-9791 compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It can operate at temperatures between 0 and 70C. This TX module supports 10/100/1000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Sonicwall®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable.Gigabit Ethernet port for ultra-fast network speeds.SFP with data networking application/usage for reliability and maximum efficiency

This Avago® AFBR-5715ALZ compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Avago®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Multi-mode fiber mode support for feasible connectivity with added productivity

This Sonicwall® 01-SSC-9790 compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Sonicwall®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

This Finisar® FCLF-8520-3 compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It can operate at temperatures between 0 and 70C. This TX module supports 10/100/1000Base auto-negotiation and can be configured to fit your needs. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Finisar®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-TX technology, get up to 1000Mbps data transfer rate over twisted pair cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Hot-swappable form factor allows hassle-free and easy usage with increased efficiency.SFP (mini-GBIC) with data networking application/usage for maximum productivity and usability

Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance.Gigabit Ethernet port for ultra-fast network speeds.With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable

This Calix® 100-01661 compatible SFP transceiver provides 10/100/1000Base-TX throughput up to 100m over a copper connection via a RJ-45 connector. It is also capable of withstanding rugged environments and can operate at temperatures between -40C to +85C. This TX module supports 10/100/1000Base auto-negotiation and can be configured to fit your needs. It is guaranteed to be 100% compatible with the equivalent Calix® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. It is built to meet or exceed the specifications of Calix®, as well as to comply with MSA (Multi-Source Agreement) standards to ensure seamless network integration. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable.Gigabit Ethernet port for ultra-fast network speeds.Hot-swappable form factor allows hassle-free and easy usage with increased efficiency.SFP (mini-GBIC) with data networking application/usage for maximum productivity and usability

This Cisco Meraki® MA-SFP-10GB-LR compatible SFP+ transceiver provides 10GBase-LR throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco Meraki®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..10GBase-LR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

This ZyXEL® SFP-LX-10-D compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with ZyXEL®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

Upgrade your connectivity with the HPE R9D17A SFP Transceiver RJ45. Supporting 1000Base-T technology, this module delivers up to 1 Gbps data transfer over twisted pair cables, offering performance up to 10 times faster than standard Ethernet. Its robust design ensures dependable and productive networking for enterprise applications..With 1000Base-T technology, get up to 1000Mbps data transfer rate over twisted pair cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Twisted Pair media support for a dependable and productive connectivity.SFP (mini-GBIC) with data networking application/usage for maximum productivity and usability

This WatchGuard® WG8583 compatible SFP+ transceiver provides 10GBase-SR throughput up to 300m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with WatchGuard®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..10GBase-SR network technology for convenient, easy sharing of data and information over the network with maximum internet usage feasibility.Enjoy flexibility and scalability with data transfer rate of up to 10 Gbps with 10 Gigabit Ethernet technology.Optical Fiber media support for a dependable and productive connectivity.With its thicker diameter to carry the light of multiple wavelengths, multi-mode fiber optic cable supports the high bandwidth to carry more information with greater fidelity

This Allen-Bradley® 1783-SFP100FX compatible SFP transceiver provides 100Base-FX throughput up to 2km over multi-mode fiber (MMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Allen-Bradley®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..Compatible with Allen-Bradley 1783-SFP100FX.100Base FX SFP.Ensures reliable performance for everyday use

Optical transceivers are an integral part of fiber optic networks for data communication, Ethernet LAN, and Fiber Channel applications. ENET offers the most diverse and comprehensive compatible transceivers available..With 1000Base-ZX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance

The Cisco small form-factor pluggable portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor..Transceiver module for MMF.Pull tab comes in beige.Supports a link length of 70/100m on OM3/4 MMF.Requires RS-FEC on the host ports.Maximum power consumption: 1.2W.Wavelength: 850nm.Cable type: MMF.Core size: 50 microns.Modal bandwidth: 2000 OM3/4700 OM4/4700 OM5 on 70/100/100m cable distances.Support FCoE with the appropriate host s/w support.5-year manufacturer limited warranty

Enhance network efficiency with the AddOn 1783-SFP-1GSX-AO SFP Transceiver. Built for convenience and productivity, this module utilizes 1000Base-SX technology to provide up to 1 Gbps data transfer over optical fiber. Featuring a Gigabit Ethernet port for superior speed and multi-mode fiber support, it ensures flexible connectivity and dependable performance for high-demand networking applications..Gigabit Ethernet port delivers superior network performance.Optical fiber compatibility ensures efficient and reliable connectivity.Multi-mode fiber support provides flexible and productive networking.Perfect for high-demand applications requiring fast and dependable data transmission

Boost your network performance with the AddOn 1783-SFP-1GLX-AO SFP Transceiver. Designed for high-speed connectivity, this module supports 1000Base-LX technology, delivering up to 1 Gbps data transfer over optical fiber. Its Gigabit Ethernet port ensures ultra-fast network speeds, while single-mode fiber compatibility enables long-distance transmission with minimal signal loss-ideal for enterprise environments requiring reliable and efficient data flow..Gigabit Ethernet port ensures ultra-fast network speeds.Compatible with optical fiber cable for reliable connectivity.Single-mode fiber enables long-distance transmission with minimal signal loss.Ideal for enterprise environments requiring high-speed, stable data flow

Axiom SFP Transceiver Modules are 100% compatible in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Axiom compatible transceivers perform, fit and function identically when compared to "Original" Transceivers. Axiom brand transceivers also function with other brands within the same network. 100% Guaranteed Compatibility in all OEM applications Part number and unique product serialization; Eliminates any network communication conflicts and provides easy identification Fully compliant with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms Original Equipment Manufacturer (OEM)® names may be registered trademarks of the respective OEM, and the OEM has neither authorized nor sponsored the use of its trademark or trade name. All OEM names are used for comparative purposes only..Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.Single-mode fiber mode support for dependable connectivity with maximum usability.SFP (mini-GBIC) with data networking application/usage for reliability and maximum efficiency

Dell™ Sonicwall® 1000Base-SX SFP Short haul transceiver module eliminates potential points of failure associated with separate multiple vendor solutions. Module has SFP mini-GBIC compatible slots and supports wired connectivity technology..Interfaces/ports: 1 x Ethernet 1000Base-SX network.Media & performance: Connectivity media: Optical Fiber 1000Base-SX, Data Transfer rate: 1 Gb/s.Ethernet technology: Gigabit Ethernet.For SuperMassive E10000 Series, SuperMassive 9000 Series.Application/usage: Data Networking, optical network.Form factor: SFP.Warranty: 1 year limited.Dell™ Sonicwall® 1000Base-SX SFP Mini-GBIC short haul transceiver module is used in data networking as well as optical network and has a data transfer rate of 1 Gb/s.

This Cisco Meraki® SFP-1GB-LX10 compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Cisco Meraki®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.For transmitting data at gigabit speed over hundreds of miles with little integrity loss, single-mode fiber optic is an ideal solution

This Avago® AFBR-5710PZ compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. It can operate at temperatures between 0 and 70C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Avago®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-SX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Up to 10x faster than standard Ethernet connection and provides high-performance.Optical fiber cable compatible - Spans afar and provides speedy data transmission rates between servers and network components.Multi-mode fiber mode support for dependable connectivity with maximum usability

This Calix® 100-01662 compatible SFP transceiver provides 1000Base-LX throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector. It is capable of withstanding rugged environments and can operate at temperatures between -40 and 85C. Our transceiver is built to meet or exceed OEM specifications and is guaranteed to be 100% compatible with Calix®. It has been programmed, uniquely serialized, and tested for data-traffic and application to ensure that it will initialize and perform identically. All of our transceivers comply with Multi-Source Agreement (MSA) standards to provide seamless network integration. Additional product features include Digital Optical Monitoring (DOM) support which allows access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty..With 1000Base-LX technology, enjoy up to 1000Mbps data transfer rate over optical fiber cable.Gigabit Ethernet port for ultra-fast network speeds.Supports optical fiber cable for durable performance, minimal signal loss, and fast data transfers to greater distances.With a single wavelength of light, the single mode fiber optic can carry data and transmit audio/video applications over miles of distance