Kanto TV Wall Mounts

The PF300 provides a low-profile solution to mounting your flat screen TV. Designed to support 150 pounds, its 27-inch wall plate ensures an easy installation on both 16 and 24-inch stud centers. The mounting brackets come equipped with adjustable screws to facilitate precision leveling, Torx screws to protect against theft, and quick release cords for easy removal of your TV. Along with a 6-inch extension bit to conveniently access the security and leveling screws after mounting your TV, the PF300 comes with all the necessary hardware for wood stud and concrete installations.

Diagonal ceiling. Straight logic.

The P301 allows you to mount your projector to the ceiling, to the side of a beam or a slanted surface. It sounds complex, so thankfully Kanto has designed this mount for total ease of use. It smartly features adjustable arms which allow you to accurately center the mount to the projectors center of gravity essential for vertical hanging. Versatility lies at the heart of the design with extension, pivot, tilt and swivel adjustments to set up your projector in almost any situation. Almost any projector mounting configuration is now possible, thanks to the P301.

Combining H-Frame mounting arms with a single stud wall plate, PS350 is the new standard in Full Motion Mounts. SUPPORTS UP TO 88 POUNDS: With its solid steel construction, the PS350 is designed to hold up to 88 pounds. EXTENDS UP TO 22 INCHES: The PS350 extends 22" from the wall to give you a variety of viewing options. CLEAN FINISH: The PS350 is made of solid steel with a durable powder coated finish - giving you a sophisticated look and feel. TILT MECHANISM: With 12° of forward tilt and 2° of backwards tilt, the PS350 makes it easy to angle your TV just the way you want it. LOW PROFILE DESIGN: When pushed back into place, your TV sits less than 2" from the wall. VESA SIZES TO 600×400: The adjustable H-frame mounting brackets allow the PS350 to accommodate VESA sizes ranging from 200×75 to 600×400 SWIVELS UP TO 180 DEGREES: The two extension arms allow you to swivel the TV up to 180°, depending on TV size. When pushed back against the wall, note that the center of the TV plate is centered with the wall mount. MAGNETIC COVERS: Magnetic covers attach to the wall plate to give you a clean, modern look. SLEEK CABLE MANAGEMENT: An integrated cable management system allows you to route your power and video cables neatly between the TV and the wall. EVERYTHING YOU NEED: Because every installation is unique, PS350's are carefully packaged with all the lag bolts, anchors, mounting bolts, washers and spacers that you could need. Everything is labeled with clear instructions that correspond with the manuals in order to simplify your installation. WHITE CABLE SLEEVE (WHITE MODEL ONLY): For a more discreet appearance, the white model comes with a white cable sleeve to match the surrounding area.

The T3760 is a tilting mount designed for flat panel TVs from 37" to 60" - it provides the structure and stability to get it up on the wall - hassle-free. Quick-release cords make it easy to access your connections, and move your TV left or right once the mount is installed. Easy installation, a wide range of VESA sizes, easy tilting, and the strength to hold up to 150 pounds - what more could you ask for from an easy-to-install wall mount?

Defy gravity.

Kanto PMX660 Pro Series Full Motion Mount for 37" to 80" TVs

The PF400 provides a low-profile solution to mounting your flat screen TV. Designed to support 200 pounds, its 35-inch wall plate ensures an easy installation on both 16 and 24-inch stud centers. The mounting brackets come equipped with adjustable screws to facilitate precision leveling, Torx screws to protect against theft, and quick-release cords for easy removal of your TV. Along with a 6-inch extension bit to conveniently access the security and leveling screws after mounting your TV, the PF400 comes with all the necessary hardware for wood stud and concrete installations.

This is probably what you imagined before you started shopping for a mount.

Kanto PDX650W Full Motion Mount for 37" to 75" TVs White

Mount displays between 26 and 55 inches on any wall and easily adjust viewing angles with this Kanto full-motion TV mount.

Mount displays between 26 and 55 inches on any wall and easily adjust viewing angles with this Kanto full-motion TV mount.

Kanto PDC650 TV mount is specifically designed for inner and outer corner installations. Its two independent wall plates can be mounted to adjacent walls, allowing TVs up to 125 lbs. to be safely positioned within a corner. Alternatively, turning the wall plates inwards allows for mounting to an outer edge, column or pillar. Depending on screen size and the distance between the wall plates, the articulating arms offer up to 40 degrees of swivel in either direction. Further improve line-of-sight and reduce glare by tilting your TV 15 degrees forward or three degrees backward. The PDC650 also includes cable management clips and wall plate covers to ensure a professional looking setup.

Capable of extending 27.6" from the wall, Kanto PS400 full motion TV mount offers unparalleled range of motion for screens as large as 70". Extend your TV out of recessed areas or swivel it up to 180 degrees to reach around corners and accommodate angled seating arrangements. A 14 degrees tilt range also helps to reduce glare and further improve line-of-sight with your TV. Sitting 1.9" from the wall when fully retracted, the PS400's low-profile design incorporates plastic wall plate covers and integrated cable management to ensure a professional looking setup.

Wide enough to fit even 24 stud centers.

The KT3260 is a tilting TV wall mount wide enough to fit even custom 24 stud centers. While most construction uses 16 stud centers, there are many applications where 24 centers are needed the KT3260 wall plate is wide enough to fit both. With its lowprofile design, range of VESA patterns and flexible tilting mechanism, this mount is a great fit for TVs between 32 and 60. Its also built with adjustable quickrelease cords making it easy to remove your TV from the wall and access cables.

Mount displays on any wall and find the perfect viewing angle with this Kanto full-motion mount for 37- to 60-inch TVs.

The PS350 provides an amazing range of motion, offering 22" of extension yet sitting less than 2" from the wall when pushed in. Capable of accommodating TVs up to 60" and weighing 88 pounds, PS350 is simple to install and easy to use. The H-frame style TV plate fits a wide range of VESA sizes. The attractive solid steel construction includes a cable management system to hide your cables, and magnetic covers to hide the wall mount lag bolts.

Mounting your TV in a corner can be a great way to deal with limited wall space or angled seating arrangements. While some full motion mounts achieve this by being installed on near-by studs, the FMC1's unique 90° wall plate can be mounted squarely in a corner, ensuring a perfectly centered setup with far more flexibility. Suitable for wood stud and concrete walls, the FMC1 features a telescoping support arm that provides adequate space for TVs as large as 60 inches. It's also capable of swiveling left and right, allowing your TV to be pushed up against adjacent walls, and tilting forwards and backwards to reduce glare and improve line-of-sight with your screen.

Easily mount your projector to your ceiling.

Easily mount your projector to your ceiling. This universal projector mount is most commonly used in boardrooms and offices, but is also ideal for home theatre applications. It features a 360degrees ball swivel, tilt capability, and can be extended between 9 and 12 from the ceiling. Included is a full set of extension arm lengths and projector mounting hardware to ensure that your installation has all the tools it needs from the getgo. We dont provide the hardware to mount to your ceiling there are just too many variables involved. Also available in a gloss white finish.

A step above the ordinary.

Kanto TTS100 Tabletop TV Stand Mount for 37" to 60" TVs

Capable of extending 27.6 inches from the wall, the PS400 full motion TV mount offers unparalleled range of motion for screens as large as 70 inches. Extend your TV out of recessed areas or swivel it up to 180° to reach around corners and accommodate angled seating arrangements. A 14° tilt range also helps to reduce glare and further improve line-of-sight with your TV. Sitting 1.9 inches from the wall when fully retracted, the PS400's low-profile design incorporates plastic wall plate covers and integrated cable management to ensure a professional looking setup.

Arrange the position of your TV so everyone has a clear view with this Kanto full-motion TV mount.

Arrange the position of your TV so everyone has a clear view with this Kanto full-motion TV mount.

Defy gravity.

Don't let the size of your TV dictate where you put it. Capable of supporting TVs up to 100, the PMX700 features two articulating arms that can be horizontally offset to give you the utmost discretion over where your TV is placed. With 31.3 of extension, this full motion wall mount provides enough tilt and swivel movement to ensure you always have the perfect viewing angle. Its low profile design allows your TV to sit 2.6 from the wall when fully retracted and features cable management clips to keep your cables out of sight.

The PDC650 TV mount is specifically designed for inner and outer corner installations. Its two independent wall plates can be mounted to adjacent walls, allowing TVs up to 125 pounds to be safely positioned within a corner. Alternatively, turning the wall plates inwards allows for mounting to an outer edge, column or pillar. Depending on screen size and the distance between the wall plates, the articulating arms offer up to 40° of swivel in either direction. Further improve line-of-sight and reduce glare by tilting your TV 15° forward or 3° backward. The PDC650 also includes cable management clips and wall plate covers to ensure a professional looking setup.

Redefining the term mobile device.

Kanto MTM65PL Mobile TV Mount with Adjustable Shelf for 37" to 65" TVs

Every installation of a TV mount is unique, and sometimes, extra mounting accessories are required to achieve the perfect installation. The MB Series offers additional extensions and adapters to ensure the perfect installation for your needs.

The PDX700 full motion wall mount is designed to give you flexibility and peace of mind when mounting TVs as large as 100 inches. Built to meet extensive UL safety requirements, its extra-wide wall plate and heavy-duty articulating arms comfortably support 150 pounds, even at full extension. Swivel your TV to accommodate angled viewing and tilt it to reduce glare and improve line-of-sight when mounting above eye-level. The PDX700 includes a drill template and an assortment of hardware for mounting to brick, concrete or wood-studs up to 24 inches apart. Integrated cable management and wall plate covers are also provided to ensure a clean, professional looking setup.

The PT400 is a low-profile, tilting wall mount designed to improve line-of-sight with your TV. Its pre-tensioned mounting brackets provide 12° of forward tilt and come equipped with adjustable screws to facilitate precision leveling. Torx screws and a locking feature are also included to protect against theft, while quick release cords provide an easy way of removing your TV when unlocked. Featuring a 35-inch wall plate, the PT400 ensures an easy installation on both 16 and 24-inch stud centers, and comes with all the necessary hardware for wood stud and concrete installations.

Introducing the R600 Recessed In-Wall TV Mount, the ultimate solution for a clean and sleek home entertainment setup. Designed to accommodate TVs ranging from 65” to 90” and weighing up to 135 lbs, this mount offers a true zero gap installation, ensuring your TV sits flush against the wall for a polished look. Featuring an oversized in-wall box, the R600 allows for convenient storage of cable set-top boxes and TV breakout boxes, all neatly concealed behind your TV. The durable metal cable management clips and rubber grommets keep your cables organized and out of sight, creating a clutter-free environment. With an easy-to-use drywall template for new constructions and metal knockouts for power outlet installation, the R600 makes the installation process seamless for contractors. Its foldable design keeps the mount safe until you're ready to finish your project. Elevate your viewing experience with the R600, where style meets functionality!

R400 is a mount made for Pro's featuring a true no gap installation that allows your TV to sit perfectly flush against your wall for the ultimate low-profile look. Thin TVs like OLED appear to float like a picture frame with no visible hardware. With a recessed box that sits in-between studs, you can store streaming boxes and other small electronic accessories out of sight. Metal knockouts allow you to easily run a power outlet into the box, while rubber grommets handle all other cabling for a completely in-wall, wire-free experience. Durable metal cable management clips on the articulating arms take care of messy cables when the TV is pulled out to its full 18" of extension.

The PF300 provides a low-profile solution to mounting your flat screen TV. Designed to support 150 pounds, its 27-inch wall plate ensures an easy installation on both 16 and 24-inch stud centers. The mounting brackets come equipped with adjustable screws to facilitate precision leveling, Torx screws to protect against theft, and quick release cords for easy removal of your TV. Along with a 6-inch extension bit to conveniently access the security and leveling screws after mounting your TV, the PF300 comes with all the necessary hardware for wood stud and concrete installations.

The TE300 extendable tilting TV mount offers the simplicity of a tilt mount with none of the drawbacks. TE300 eliminates the need to plan cabling in advance by pulling away from the wall up to 6" providing easy access to the back of your TV. This extension allows TE300 to pan 8 degrees to left or right, while 12 degrees of forward tilt and 2 degrees backward tilt help avoid glare and improve visibility when mounted above eye level. To ensure perfect TV placement, oversized TV brackets let you adjust your TV vertically while the wide, open-frame wall bracket provides horizontal adjustment and an area to route cables. Capable of supporting up to 150 lbs., any TV between 43" and 90" can mount safely and securely to the TE300 tilting TV mount.

The PF400 provides a low-profile solution to mounting your flat screen TV. Designed to support 200 pounds, its 35-inch wall plate ensures an easy installation on both 16 and 24-inch stud centers. The mounting brackets come equipped with adjustable screws to facilitate precision leveling, Torx screws to protect against theft, and quick-release cords for easy removal of your TV. Along with a 6-inch extension bit to conveniently access the security and leveling screws after mounting your TV, the PF400 comes with all the necessary hardware for wood stud and concrete installations.

The CM600 TV Ceiling Mount is engineered to ensure a quick installation on both flat and sloped ceilings. Capable of swinging up to 90°, its telescoping extension pole provides 23" of height adjustment and 360° of rotation, allowing you to position your TV exactly where you want it. Along with adjustable leveling screws, its mounting brackets feature four discrete tilt options, giving you the ability to angle your TV independent of the pole. Tilt it up to 15° forward to improve line-of-sight, or 6° backward to compensate for potential lean. Unobstructed cable management is also provided through the entire length of the mount, keeping your cables safe and out of sight.

Don’t let the size of your TV dictate where you put it.

Capable of supporting panels up to 120”, PMX800 adjustable wall mount can be horizontally offset 11” in either direction to dial in the lateral placement of your display. An oversized 900×600 VESA interface improves compatibility with extra-large touch screens and provides flexibility for vertical positioning. With 31.3” of extension, this full motion wall mount gives you all the swivel needed to get the perfect viewing angle. Its low-profile design allows your TV to sit 2.6” from the wall when fully retracted and features all-metal cable management and lag bolt covers to stand the test of time. Toolless tilt rounds off PMX800’s extensive feature set allowing for on-the-fly adjustments.

The TE300SG outdoor extendable tilting TV mount keeps your TV safe during stormy weather and gives you features you can’t get from a standard tilt mount.

A latching system lets you to lock your TV into place when wind kicks up to prevent accidental damage. A simple pull on the release cord allows you to extend your TV up to 6” providing access to the rear of your TV for easy cable management at any time. Included stainless steel Security Torx TV screws provide security and peace of mind while the galvanized coating protects against rust. Capable of supporting up to 150 lbs., nearly any TV between 45” to 100” can mount safely and securely to TE300SG.