10-Foot Cable

StarTech.com® DVI-D Single link cable in black color connects video source with the high-resolution DVI monitors. The 10' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. Carries digital video signals at a rate of 4.95 Gb/s for high speed transmission. Aluminum-mylar foil with braid shielding on 28 AWG conductors secure data from electromagnetic and radio frequency interference. DVI-D male-to-male connector of the cable offers reliable connection without any data loss. Molded design of the connectors prevents damages such as wear and tear during installation. Hot-pluggable feature of the cable enables it to quickly connect or disconnect DVI display devices..Single link video monitor cable supports resolutions up to 1920 x 1200 for better clarity.10' cable for convenient usage.DVI-D (19 pin) male to male connectors for effective connection.Polyvinyl chloride jacket for extra protection and aluminum Mylar foil with braid shield prevents electromagnetic interference.Comes in black color for enhanced look.Comes with 28 AWG Wire gauge for protection.Uses nickel-plated connector for effective connection.Transfers data at rate of 4.95 Gb/s.Compatible with hot-plugging of DVI display devices.Controls limitations of shorter-length cables.Meets RoHS standards.Contains 1 x 10' DVIxD M/M single link cable.Used to connect your desktop or laptop computer to a DVI-D single link display or projector.Comes with limited lifetime warranty.StarTech.com® 10' DVI-D single link cable effectively routes video signal from video source to a high-resolution DVI monitor. Supports 1920 x 1200 resolution video signal.

10ft Cat6 Snagless Unshielded Network Patch Cable - Gray.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Gray.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in gray color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.29 lbs..Comes with lifetime warranty

The C2G ® 10' black adapter cable is a perfect solution for connecting the mini DisplayPort or Thunderbolt™ output of a small laptop or tablet to a monitor or other display, which accepts a DisplayPort input. It has a mini DisplayPort male DisplayPort 1.2 digital audio/video connector on first end and DisplayPort male DisplayPort 1.2 digital audio/video connector on the second end. This adapter cable carries a digital audio/video signal and supports up to 4k resolution for superior video quality. It meets the requirements of high performance applications. This cable is suitable for conference rooms, corporate offices and home offices..Adapter cable is suitable for connecting the Mini DisplayPort or Thunderbolt output of a small laptop or tablet to a computer monitor.Cable length: 10'.Has mini DisplayPort male digital audio/video connector on first end and 20-pin DisplayPort male digital audio/video connector on second end.PVC jacket offers protection against corrosive environment.Features aluminum foil wrap braided shielding and foam-polyethylene insulation to minimize EMI/RFI interference.Features two 30 AWG tinned copper conductors for enhanced conductivity.Voltage rating: 30 V.Minimum bend radius: 52 mm.Supports audio/video device.Supports up to a 4k resolution.Insulation resistance: 10 MOhms/km, Conductor resistance: at 20 deg C max.Time delay: 5.2 ns/m, Attenuation: 5.02 dB at 100 - 450 MHz, 7.69 dB at 1 GHz, 12.595 dB at 2 GHz, 17.495 dB at 3 GHz, 22.395 dB at 4 GHz.Carries a digital audio/video signal.Meets CE certification.Weight: 0.25 lbs..Comes with lifetime warranty.HP® 6' Black standard power cord has IEC C13 connector on first end and NEMA 5-15 connector on second end. Offers reliable performance.

The C2G® 10' male to male category 6 blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Ethernet network patch cable is suitable for high performance networking applications.Cable length: 10'.Connections: 1 x RJ-45 male to 1 x RJ-45 male.Conductor: 4 twisted pair 24 AWG stranded bare copper, Construction: Polycarbonate connector.Meets Cat5e TIA/EIA and Meets RoHS Compliant standards or certifications.Suitable with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: PVC, Minimum average thickness: 0.6 mm, Outer diameter: 6.2 + 0.30 mm.Conductor DC resistance: 9.38 ohm/100 m (maximum).Impedance: 100 ohm, Capacitance: 5600 pf/100 m.Propagation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Insulation: HDPE, Diameter: 0.98 + 0.05 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD; 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.25 lbs..Comes with lifetime warranty

Standard XLRP-XLRJ-10ST 10' cable..Cable Length: 10'.XLR.Great performance and value.Conductor: Copper.Connector on first end: 1 x XLR male audio.Connector on second end: 1 x XLR female audio.Gauge: 24 AWG.Shield: 90% copper braid shielding for excellent rejection of EM and RF interference.Jacket color: Matte black.Molded strain relief.RoHS compliant.Xtra flex jacket.Nickel-plated connectors.Material: Polyvinyl chloride (PVC) jacket, copper braid shielding.Green compliant.Device supported: Audio device.Overall diameter: 0.236".Features: Molded, stranded.Lifetime limited warranty

Comprehensive PWC-BK-10 10' Standard Power Cord Power Cable, Black.Power cable to connect and power your equipment.Power female IEC 60320 C13 and power male NEMA 5-15P for efficient charging.SVT jacket shields the copper from environmental factors.10' power cable for easy installation.Can be used with PC, monitors, printers, scanners and more.Comes with a lifetime limited warranty

This 10' Monster HDMI 2.1 cable provides up to 48Gbps data transfer rates. The 8K HDMI cable can support all home theater audio formats and streaming video services, with advanced audio technologies for uncompressed surround-sound quality..Easily connect HDMI-enabled devices, gaming consoles such as PlayStation and Xbox, computers, and more to your TV or electronic display.Cable length: 10'.Features two male HDMI connectors.Comes in black

HDMI male to male cable provides easy connectivity between display and multimedia devices..10.2 Gbps data transfer rate for fast connections.Ethernet support for surfing the Internet.PVC jacket for protection from external noise.Aluminum foil braided shielding for added durability.30 AWG for proper insulation and improved performance.10' length for easy access to ports in confined spaces.Voltage Rating: 30 V.DC Resistance: 300 V.Insulation Resistance: 100.Compliant Standards: RoHS.Compliant Standards: RoHS

Tripp Lite AC Power Cord, 10'.10'.Molded/Heavy Duty.Black.Power IEC 320 EN 60320 C13.UL, CSA, RoHS Compliant.Limited lifetime warranty.Cable Type: Molded.Power Supply: 100 - 250 V AC.Connector A: IEC 60320 C13 Female.Connector B: IEC 60320 C14 Male.Device Supported: Server.Used in server applications that require a higher rated, heavier gauge cable.Certifications/Standards: CSA, UL, RoHS.Warranty: Lifetime limited.Heavy-duty Tripp Lite power extension cord features an IEC-60320-C13 to IEC-60320-C14 connection and is used in server applications

The USB-C to A 3.2 Male to Male Cable is the perfect solution for connecting any standard USB-C enabled device to a USB-A device or accessory for charging and data transfer. Ensure that a USB-C equipped laptop, smartphone, or tablet is fully charged and ready to go from the 3A charging output, while simultaneously transferring photos, music, or data at speeds up to 5 Gbps. The USB-C connector has a symmetrical design which is identical on both sides, so it does not matter if you plug it in upside-down or right-side-up. It will plug in the first time, every time while preventing damage to the connector port..This cable is perfect for connecting your USB compatible devices.Cable length: 10'.USB Type-A (9-pin) to USB Type-C (24-pin) connectors.Black cable with PVC jacket to protect this cable from environmental factors.Cable data transfer rate : 5000Mbps.Compatible with your computer.Meets or exceeds RoHS2, 2011/65/EU, UL 2725, USB-IF, and USB 3.0/ USB 3.1 standards.3-year manufacturer limited warranty

The C2G Cables to Go CAT-6 snagless unshielded (UTP) slim network patch cable is the perfect solution for high-density data center applications. The use of 28 AWG conductors allows for a 36% reduction in diameter over a standard CAT-6 network patch cable. This reduced diameter provides a smaller cable surface area which allows for increased airflow when compared to standard CAT-6 cables. The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables. The small size and small bend radius of this cable allow it to be easily routed through cable management panels..CAT-6 snagless unshielded (UTP) slim Ethernet network patch cable designed for fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications.Cable length: 10'.Features an RJ45 (male) connector on each end.Constructed from high-quality copper cable and features a durable PVC jacket; comes in blue.The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.The 28 AWG conductors also allow this cable to have a smaller bend radius than standard CAT-6 cables.36% reduction in diameter compared to standard Cat5e cables.28 AWG cable is perfect for crowded spaces inside a rack unit or limited spaces.Meets the ANSI/TIA-568-C.2 standard for patch cord performance.Lifetime limited manufacturer warranty

The C2G 27153 10' Cat6 snagless unshielded black network patch cable is ideal for fast Ethernet networks requiring bandwidth-intensive voice, data or video distribution applications. This cable with RJ-45 male to RJ-45 male connection, reduces impedance as well as structural return loss and has shortened body plug to keep minimum Near-End crosstalk levels. It has HDPE insulation and PVC jacket for durability. High quality 4-pair 24 AWG stranded bare copper cable eliminates unwanted cable snags during installation and offers extra strain relief. The 50-micron gold plated contacts ensure good signal conductivity. Works well with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other twisted-pair applications..RJ-45 Male.10ft.Black.Features black polycarbonate connector, PVC jacket, molded PVC hood, copper alloy contact and HDPE insulation.Has RJ-45 male to RJ-45 male end for connectivity.4-Pair 24 AWG stranded bare copper conductors for better electrical conductivity.50-micron gold plated contacts for protection against corrosion.0.6 mm Nominal thickness, 6.2 +/- 0.3 mm O.D., 0.98 +/- 0.05 mm Dia. conductor.DC resistance: 9.38 Ohm/100 m max.Frequency: Up to 500 MHz.Voltage: 30 V.Impedance: 100 Ohm, Capacitance: 5600 pf/100 m, Propagation delay: 545 ns/100 m maximum, Delay skew: 45 ns/100 m maximum.Perfect for Gigabit 1000 BASE-T, 100 BASE-T, 10 BASE-T (IEEE 802.3), 4/16 Mbps Token Ring (IEEE 802.5) and 100 VG-Any LAN applications.Temperature rating: 60 deg C.Snagless design secures clips when plugging and unplugging.Includes standard RJ-45 connectors and unshielded twisted pair wires.Meets RoHS compliance and TIA/EIA standards and certifications.Weight: 0.25 lbs..Comes with lifetime warranty.6 outlets surge protector features 15 A, 120 V, 1800 W, 2 position on/off switch/15 A AC circuit breaker.

The C2G® 10' male to male category 5e blue snagless patch cable features RJ-45 male connectors on both the ends for connectivity. This cable with PVC jacket, truncates both impedance and structural return loss. High conductivity copper cable minimizes near-end crosstalk levels. Applications requiring bandwidth-intensive voice, data or video distribution need fast Ethernet computer networks. Bonded paired cable maintains the twist-spacing throughout the line up to the termination point. This cable is compatible with hub, switch, router, network adapter, modem DSL/cable, patch panel and other twisted pair applications..Category 5e.10ft.Blue.Connector on first end: 1 x RJ-45 Male network, connector on second end: 1 x RJ-45 Male network.Device supported: Network device, Snagless design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief.Features unshielded twisted pair technology for good LAN network connectivity.Come in blue color.Jacket material: FR-PVC, Nominal thickness: 0.55 mm, Outer diameter: 5.3 mm + 0.15 mm.Conductor DC resistance: 89 ohm/km (maximum).Insulation resistance: 100 ohm/km (minimum).Dielectric strength: 500 MV/m.Insulation: HDPE, Diameter: 0.95 + 0.02 mm.Contacts have 50 micron gold plating and the hood is made of molded PVC for durability.Perfect for 1000 BASE-T, 100 BASE-T, 10 BASE-T, 4/16 Mbps Token Ring, 100 VG-AnyLAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice applications.Snagless design provides protection to the clips when plugging and unplugging.Weight: 0.24 lbs..Comes with lifetime warranty

The C2G 10' red Cat5e snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both ends for enhanced connectivity. This male/male cable with FR-PVC jacket truncates both impedance and structural return loss. The cable features 24 AWG stranded bare copper conductor, which minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with hubs, switches, routers, network adapters, modem DSL/cables, patch panels and other high-performance networking applications..Category 5e for Network Device.RJ-45 Male.10ft.Red.FR-PVC Jacket for added durability and 24 AWG stranded bare copper conductors for excellent signal transmission.Meets RoHS, EIA/TIA 568B.2 standards and certifications.Contact material: 50 micron gold-plated copper alloy.Compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications.Comes in red color.Diameter: 5.3 mm OD jacket, 0.95 + 0.05 mm insulation, thickness: 0.55 mm jacket.Voltage rating: 30 V, Dielectric strength: 500 MV/m.Resistance: 89 ohm/km (maximum) DC conductor, 100 ohm/km (minimum) insulation.Impedance: 100 ohm, Capacitance: 5600 pf/100 m, Propogation delay: 545 ns/100 m (maximum), Delay skew: 45 ns/100 m (maximum).Temperature: 60 deg C.Snagless design protects clips while plugging and unplugging operation.Perfect for 1000base-T, 100base-T, 10base-T, 4/16 Mbps Token Ring, 100 VG-Any LAN, 100 Mbps TP-PMD, 55/155 Mbps ATM and voice.Weight: 0.23 lbs..Comes with lifetime warranty

The C2G® 10' black Displayport to HDMI adapter cable is perfect for connecting the DisplayPort output of a laptop to a HDTV or projector, which accepts a HDMI input. It has a DisplayPort male digital audio/video connector on first end and HDMI male digital audio/video connector on the second end. This adapter cable carries a digital audio/video signal and supports up to 1080p resolution for superior video quality. It meets the requirements of high performance applications..DisplayPort/HDMI for Notebook, TV, Projector, Audio/Video Device.10 ft.1 x DisplayPort Male Digital Audio/Video.1 x HDMI Male Digital Audio/Video.Black.Features two 30 AWG bare copper conductors for enhanced conductivity.Voltage rating: 30 V.Temperature: 0 to 50 deg C operating, -25 to 70 deg C storage.Supports audio/video device, notebook, projector and TV.Supports up to a 1080p resolution.Insulation resistance: 10 MOhms/km, Conductor resistance: at 20 deg C max.Time delay: 5.2 ns/m, Attenuation: 5.02 dB at 100 - 450 MHz, 7.69 dB at 1 GHz, 12.595 dB at 2 GHz, 17.495 dB at 3 GHz, 22.395 dB at 4 GHz.Carries a digital audio/video signal.Meets CE certification.Weight: 0.39 lbs..Comes with 3 years warranty

This power extension cable features one computer power female connector and one hooded male power connector, enabling you to extend the connection between your PC and monitor..Size: 10 ft (L).Conductor size: 14 AWG.Cord type: SJT.Length: 10'.Black.Cable jacket type: PVC (polyvinyl chloride).Connector on first end: 1 x IEC 60320 C13 power, connector on second end: 2 x IEC 60320 C14 power.Dimensions: 0.8"(H) x 1.1"(W) x 120.1"(L).Voltage rating: 125 VAC, current rating: 15 A, frequency: 60 Hz.Wire construction ensures maximum power handling capability.Provides a high quality replacement for worn out or missing power cords.Provides higher power handling, good for larger devices, saves space and removes clutter, enabling you to place your PC and monitor as needed.Compatibility: PDUs, servers, monitors, computers.Package contents: 1 - 10' 14 AWG computer power cord extension - C14 to C13.Green compliance certificate/authority: RoHS.Weight: 16.5 oz..Warranty: Lifetime limited.10" computer power cord extension cable's heavy duty 14 AWG wire gauge is more than sufficient for handling higher power loads, making it a reliable solution for connecting larger servers to PDUs.

C2G® CAT6 UTP Patch cable in white color connects network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking equipments. The 10' cable is made of flexible as well as fire retardant PVC to ensure maximum bending and to prevent any fatal fire accident. HDPE shielding on 24 AWG conductors secure data from electromagnetic and radio frequency interference. Twisted pair design of the cable conductors minimizes crosstalk and attenuation for clear signal transmission. Gold-plated connectors prevent signal loss due to oxidation or corrosion. Snagless design of the RJ45 male-to-male connector prevents wear and tear during installation. Suitable for application involving voice, data and video distribution in Ethernet and gigabit network..Network patch cable that protects clips when plugging and unplugging.Easy-to-install 10' long cord.RJ-45 male to male connectors for reliable connections.Ultra flexible PVC jacket offers double shielding against outside noise.Comes in white color for a new look.Network patch cable offers flexibility.Operates at 30 V and 60 Deg C for better operation.2 x 8P8C (RJ45), 4 twisted pair conductors for good conductivity.The 24 AWG wire gauge allows more of the signal to pass through without distortion or signal loss.50-micron Gold-plated connector plating for good conductivity.Patch style connector is great for HD video applications.Polycarbonate connector and molded PVC hood for heavy duty use.Has 0.60 mm average thickness and 6.20 mm + or - 0.30 mm outer diameter for ease of use.Meets RoHS Certification and standards.9.38 ohm 100m conductor DC resistance for better performance.Weighs 0.29 lb.Comes with lifetime warranty.C2G® 27163 10' White CAT6 UTP Patch cable supports 10/100/1000 Base-T gigabit network application. Snagless molded RJ-45 male to male connectors offer reliable connection.

The 10ft (3m) USB-C to C 2.0 Male to Male Cable is the ultimate solution for connecting your USB-C enabled devices for fast charging and data transfer. With a 5A charging output and data transfer speeds up to 480 Mbps, this cable ensures your devices stay powered and synced effortlessly. Its reversible USB-C connectors make it easy to plug in, while the durable PVC jacket and stranded copper conductors provide reliable performance. Compatible with Apple® and Microsoft® Surface® devices, this high-quality cable offers versatility and longevity with a lifetime warranty..The USB-C to C 2.0 Male to Male Cable is ideal for connecting devices like laptops, tablets, and smartphones for charging and data transfer. It is perfect for use with Apple®, Microsoft® Surface®, and other USB-C enabled devices..This cable has a length of 10 feet (3 meters), providing ample reach for connecting devices in various settings..It features USB-C Male connectors on both ends, providing a stable connection for charging and data transfer. The connectors are symmetrical for a reversible, hassle-free plug-in..The cable is built with 30 AWG wire gauge and is made of PVC jacket material. It uses stranded copper for conductors, offering durability and effective data transmission. The true color is black..While this cable is primarily for charging and data transfer, it also supports video input and output via USB-C, allowing for media sharing across devices..Connector 1: USB-C Male Connector 2: USB-C Male.The cable supports data transfer speeds of up to 480 Mbps, allowing for quick and efficient file sharing between devices..Compatible with Apple® iPad Pro®, MacBook®, MacBook Air®, and MacBook Pro®. It also works with the Microsoft® Surface® Book 2, Surface Go, and other USB-C enabled devices..This cable complies with the USB 2.0 standard and is RoHS compliant, ensuring it meets environmental and safety regulations..The product comes with a lifetime warranty, ensuring long-term reliability and support.

The C2G ® 10' yellow Cat6 snagless unshielded Ethernet network patch cable features RJ-45 male connectors on both the ends for enhanced connectivity. This male/male cable with PVC jacket, truncates both impedance and structural return loss. Cable with 24 AWG stranded bare copper conductor, minimizes near-end crosstalk levels. Patch cable maintains the twist spacing throughout the line up to the termination point. This cable is compatible with network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other high performance networking applications..Category 6 for Network Device.RJ-45 Male.RJ-45 Male.10ft.Yellow

The Cisco® STACK-T1-3M= Stackwise-480 stacking cable spare of length 9.8', is compatible with Cisco Catalyst 3850 series switches..Cable length: 9.8'.Compatible with Cisco Catalyst 3850 series 3850-24P-E, 3850-24P-L, 3850-24P-S, 3850-24PW-S, 3850-24T-L, 3850-48F-E, 3850-48F-L, 3850-48T-S, 3850-48P-L.Comes with copper conductor for better conductivity.Well suited to use with PC and supports network devices.Cisco STACK-T1-3M 9.84' Type 1 stacking cable is compatible with Catalyst 3850 series switches. Supports any network devices.

The C2G® 10' black Displayport cable is a perfect solution for connecting the DisplayPort output of a laptop to a monitor or other display, which accepts a DisplayPort input. It has a DisplayPort male DisplayPort 1.2 digital audio/video connector on both the ends. This cable comes with the latches that secure the cable in the port carries a digital audio/video signal. It supports a HBR bandwidth and up to 1920 x 1080 resolution for superior video quality. This cable meets the requirements of high performance applications..Cable for connecting the DisplayPort output of a laptop to a computer monitor that accepts a DisplayPort input.Cable length: 10'.Has 20-pin DisplayPort male digital audio/video connector on first end and 20-pin DisplayPort male digital audio/video connector on second end.PVC jacket offers protection against corrosive environment.Features aluminum foil wrap braided shielding and foam-polyethylene insulation to minimize EMI/RFI interference.Features two 30 AWG tinned copper conductors for enhanced conductivity.Certifications & Standards: CE.Minimum bend radius: 73 mm.Supports audio/video device, monitor and notebook.Supports a high bit rate bandwidth and up to a 4k resolution.Insulation resistance: 10 MOhms/km, Conductor resistance: at 20 deg C max.Time delay: 5.2 ns/m, Attenuation: 5.02 dB at 100 - 450 MHz, 7.69 dB at 1 GHz, 12.595 dB at 2 GHz, 17.495 dB at 3 GHz, 22.395 dB at 4 GHz.Carries a digital audio/video signal and features locking latch for enhanced operation.Meets CE certification.Weight: 0.35 lbs..Comes with lifetime warranty

C2G® 10' Cat6 STP network patch cable in blue color has RJ-45 male/male connectors on first and second end. Cable will handle bandwidth-intensive applications such as datA/Voice and minimizes both impedance and structural return loss..Blue.Cable type: Category 6.Cable length: 10'.Material: Hood: Molded PVC, Housing: Polycarbonate, Jacket: PVC, Shielding: Copper, aluminum, Insulation: FM-PE.Connector details: 1 x RJ-45 male network on first and second end.Connector plating: 50 micron gold plated, Shell: Nickel plated for shielding, Technology: Unshielded twisted pair (UTP).Conductor: Copper, Conductor size: 26 AWG (7/0.16) (bare copper), Wiring scheme: 568B.Features: Molded, stranded, snagless, minimized Near-End Crosstalk (NEXT), reduced structural return loss (SRL).Rating: 75 deg C.Dimensions: 15.1(H) x 11.6(W) x 38.2(D).Protect from EMI/RFI interference; connect network adapters, hubs, switches, routers, DSL/cable modems, patch panels and other networking applications in high noise environments.Certification and Standards: Meets all ANSI/TIA 568 C.2 Cat6, UL94V-0.Weight: 0.322 lbs..Warranty: Lifetime limited.C2G® 10' Cat6 STP network patch cable in blue color features RJ-45 male/male connectors and saves high-speed network from noise and electromagnetic interference.

For fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat6 TIA/EIA standards, and drastically reduces both impedance and structural return loss (SRL). Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimizes Near-End Crosstalk (NEXT) levels. The molded, snagless boot prevents unwanted cable snags during installation and provides extra strain relief. Available in a variety of colors to easily color-code your network installation..This patch cable is perfect for fast Ethernet and Gigabit computer networks that require bandwidth-intensive voice, data, or video distribution applications.Designed for network adapters, hubs, switches, routers, HDBaseT applications, and more.Constructed with unshielded twisted pair (UTP) wires, designed to counter EMI, RFI, and crosstalk; comes in blue.50 cables per pack.Supports 10 Gigabit Ethernet networks up to 180' for fast data transmission and maximum performance and 1 Gigabit Ethernet networks up to 328'.Snagless connector design for high-density environments and protecting the RJ45 connector's lock.Meets or exceeds the EIA/TIA TSB-40 CAT-6 standards.Cable length is 10'

C2G® Universal power cord is 10' long and replaces overused and unreliable power cable. Fully-molded design cord comes in black color for an attractive look. 18 AWG SVT Cord has IEC-320 C13 female connector on the first end and NEMA 5-15P male connector on the second end for providing uninterrupting connection. The female connector plugs into the device directly and the male connector plugs into a standard outlet offers efficient connection. Cord of 6.3mm OD has 125 VAC input voltage and 10 A input current. Designed to use with three pins shroud power connector. Compatible to connect with PCs, monitors, scanners and printers..Power cord is designed for supporting computers, monitors, scanners, printers and devices that use a 3-pin shroud power connector.A convenient length of 10' for ease of installation.Features IEC 320 C13 first end and NEMA 5 15R second end for reliable connection.Well suited to use with computers, monitors, scanners, printers and devices that use a 3-pin shroud power connector.Comes in black color for a new look.STV type cable for reliable connectivity.Operates feasibly with input voltage of 125 V and current of 10 A.Comes with wire of size 18 AWG.Comes with outer diameter of 6.3 +/- 0.1 mm.DVW tested at 1500VAC for 1 second.Operates feasibly at 60 deg C and stores comfortably at -20 - 60 deg C.Rated with resistance 20 deg C < 22.4 ohms/km at 25 deg C < 22.8 ohms/km and features 0.33 mm insulation with 2 +or-0.1 mm diameter.Male connector plugs into a standard outlet while female connector plugs directly into the device.Meets UL-E135710, E115330, TAA and RoHS standards.Weighs about 0.547 lbs..Comes with lifetime warranty.C2G® 3134 10' Black standard power cord with NEMA 5-15P and IEC320C13 connectivity ideal for power cable replacement. 18 AWG Heavy duty cord provides high power connection.