24V PoE

The Ubiquiti® POE-24-24W-G 24 V gigabit PoE injector offers surge protection, clamping protection, maximum surge discharge and peak pulse current for PoE devices protection. It supports Gigabit LAN PoE interface..Gigabit PoE injector offers earth grounding and surge protection to help protect against electrostatic discharge events.Dimensions: 2.24"H x 3.47"W x 1.3"D.Power: 24 VDC/1 A, 90 - 260 VAC at 47 - 63 Hz (input), Current: 0.6 A at 120 VAC, 0.4 A at 240 VAC (input).Frequency: 65 kHz (switching).Interface/ports: Gigabit LAN PoE.Efficiency: 80+ percent, Output ripple: 1 percent, Line regulation: + 1 percent, Load regulation: + 3 percent.4-Pair powering: Pins 1, 2, 4, 5 (+) and pins 7, 8, 3, 6 (-), AC connector: IEC-320 C6, Data In/PoE: RJ-45 shielded socket.Surge discharge: 1500 A power, Shunt capacitance: <5 pf data, Response time: <1 nS.Meets IEC 60950-1:2005+A1, UL60950-1, EN55022:2010, EN55024:2010, FCC Class B certifications and standards

The Ubiquiti® POE-24-12W-G 24V PoE injector with Gigabit LAN port, powers a variety of PoE devices belonging to the airFiber, airMAX, EdgeMAX, airVision, UniFi and mFi series. This 24 VDC injector provides protection against surge, clamping, peak pulse current, maximum surge discharge and ESD attacks..Power over Ethernet injector provides protection against surge, clamping, peak pulse current.Compatible with Ubiquiti products - airFiber, airMAX, airVision, UniFi, mFi.Interface/ports: Gigabit LAN port.Dimensions: 1.14"H x 3.43"W x 1.73"D.Form factor: Wall mountable.Power supply: Input: 90 - 260 VAC at 47 - 63 Hz, 0.3 A at 120 VAC, 0.2 A at 240 VAC, output: 24 VDC at 0.5 A.Temperature: 0 - 40 deg C operating, -30 - 70 deg C storage, humidity: 35 - 95% non-condensing operating.Meets IEC 60950-1:2005+A1, UL60950-1, EN55022:2010, EN55024:2010, FCC Class B, USA, EU, AR, BR, UL, CCC, Mexico standards.Weight: 3.51 oz.

The Ubiquiti Networks PoE Injector is designed for the company's airFiber, airMAX, EdgeMAX, mFi, UniFi AP, and UniFi Protect / airVision products. This 24 VDC, 7.2W, 0.3A adapter provides protection against surge, clamping, maximum surge discharge, and peak pulse current..Ubiquiti Networks offers Power over Ethernet (PoE) Adapters to power a variety of Ubiquiti products. The PoE Adapters are compatible with most Ubiquiti PoE devices, including: airFiber®, airMAX®, EdgeMAX®, mFi®, UniFi® AP, UniFi Video / airVision®.Specific PoE Adapter models are designed to work with the airGateway. The airGateway is a compact CPE (consumer premises equipment) gateway with built-in Wi-Fi used to connect the subscriber's local network to the WISP network..120 V AC, 230 V AC Input - 24 V DC, 300 mA Output.Gigabit Ethernet Input Port(s) - Gigabit Ethernet Output Port(s).Ubiquiti Networks PoE Injector (24 VDC, 7.2W)

Ubiquiti PoE Injector.Input Voltage: 24 V DC.Form Factor: Desktop.Maximum Output Power: 24 W

Maximum Output Power: 30 W.Form Factor: Desktop.Input Voltage: 24 V DC

Overcome PoE limitations with the next-generation Ubiquiti Networks FiberPoE, model F-POE-G2. Deployments with the FiberPoE Gen 2 provide significant EMI and ESD protection over typical PoE installations. The FiberPoE Gen 2 also features a durable, weatherproof form factor and enhanced surge protection. With the FiberPoE Gen 2, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs..Media converter is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device.Dimensions: 7.73"H x 3.68"W x 1.28"D.Comes in white and made of polycarbonate.Provides Gigabit bidirectional data transport between twisted-pair Ethernet cable and fiber optic cable; injects DC power to the Ethernet cable for passive PoE.Featuring a built-in high-current Gas Discharge Tube (GDT) for the DC terminal block and PoE port, the media converter delivers enhanced surge protection.The added GDT support effectively protects against lightning and other power surges.Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI).Data integrity is sustained in runs beyond 100m, the limit of Ethernet over a twisted-pair cable.Supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.PoE output: PoE RJ45 port, two-pair (4, 5+; 7, 8-) (24VDC) or four-pair (24VDC or 50VDC) PoE.DC output: 2-wire (24VDC or 50VDC) terminal block.Input DC voltage: 16V to 57V.LED: white - power on, blue - connected, blue (flashing) - activity.Operating temperature: -40 degrees Fahrenheit to 140 degrees Fahrenheit.Operating humidity 10% to 95% noncondensing.ESD/EMP protection: +/- 24kV contact/air for Ethernet.Meets or exceeds CE, FCC, IC standards

High-Performance airMAX ac Bridge Incorporating a dish reflector design with proprietary airMAX ac technology, the PowerBeam AC is ideal for CPE deployments requiring maximum performance. Management Wi-Fi Radio The PowerBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the PowerBeam AC offers a more robust mount with a convenient lifting loop or handle. Integrated Radio Design Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance because it eliminates cable losses. Plug and Play Installation The PowerBeam AC requires no tools for assembly; only a single wrench is required for pole-mounting. Performance Breakthrough airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Superior Processing Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology. Incredible Antenna "Beam" Performance The form factor of the PowerBeam AC features the highest gain for its size. The PowerBeam AC's excellent beam directivity provides the best performance in high-noise environments. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..High-performance Wi-Fi 5 access point to help you expand your network up to 15km (9.32 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 gigabit Ethernet (RJ45) port (PoE-in).Dedicated Wi-Fi radio for management.Comes with a 24V/0.5A Gigabit PoE adapter.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5240-5725MHz, U-NII-3 5725-5850MHz; management dadio: 2412-2462MHz.Meets or exceeds the CE, FCC, IC, RoHS, IEC 68-2-11 (ASTM B117), MIL-STD-810 G Method 509.5, IEC 68-2-6, IEC 68-2-14, IEC 68-2-5 at 40 degrees Celsius (104 degrees Fahrenheit), ETS 300 019-1-4, ETS 300 019-1-4, MIL-STD-810 G Method 506.5 standards.Tight beamwidth RF energy technology blocks or spatially filters out noise, so noise immunity is improved.Operating system: airOS 8.Long-range point-to-point (PtP) link mode.Offers strong WPA2 security.UNMS app allows you to set up, configure, and manage the NanoBeam access point (downloaded from the App Store or Google Play).Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using predesignated time slots scheduled by an intelligent AP controller.Intelligent QoS: priority assigned to voice/video for seamless streaming.Mounting bracket conveniently offers elevation adjustments (20-degree tilt).1 Year Warranty

2x2 MIMO airMAX ac CPE The LiteBeam AC is an ultra-lightweight airMAX ac CPE device with incredible range and disruptive pricing. Management Wi-Fi Radio The LiteBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Mounting and Surge Protection Featuring enhanced protection against ESD events, the LiteBeam AC offers a more robust mount with separate azimuth and elevation adjustments. Now with airOS 8 and airView airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability. High-Gain, Directional, 2x2 MIMO Antenna The LiteBeam AC provides 23 dBi of gain for long-distance connectivity and uses a directional antenna pattern for improved noise immunity. Breakthrough Industrial Design Featuring the freedom of three-axis alignment, the LiteBeam AC fully assembles in seconds - no tools needed. Only a single wrench is required for pole-mounting. Compact in Size, Light in Weight A lightweight form factor contained within ultra-compact packaging, the LiteBeam AC is ideal for shipping and logistics..High-performance Wi-Fi 5 access point to help you expand your network up to 15km (9.32 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 gigabit Ethernet (RJ45) port (PoE-in).Comes with a 24V/0.3A Gigabit PoE adapter.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5240-5725MHz, U-NII-3 5725-5850MHz; management radio: 2412-2462MHz.Meets or exceeds the CE, FCC, and IC standards.Operating system: airOS 8.1 Year Warranty

High-Performance airMAX ac Bridge Incorporating innovative industrial design with proprietary airMAX ac technology, the NanoBeam AC is ideal for CPE deployments requiring maximum performance from the smallest possible footprint. Management Wi-Fi Radio The NanoBeam AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device. Improved Surge Protection The NanoBeam AC features enhanced protection against ESD events. Superior Processing Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology. Incredible Antenna "Beam" Performance The form factor of the NanoBeam AC features the highest gain for its size. The NanoBeam AC's excellent beam directivity provides the best performance in high-noise environments. Performance Breakthrough airMAX ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance. Advanced Software Technology Ubiquiti's airMAX technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks. Plug and Play Installation The NanoBeam AC mounts to a variety of surfaces including poles or walls, and offers the freedom of three-axis alignment. No screws are required for pole-mounting, and only a single wall screw (not included) is required for wall-mounting. Now with airOS 8 airOS 8 provides powerful features, including airMAX ac protocol support, real-time RF analytics, and an all-new design for enhanced usability..High-performance Wi-Fi 5 access point to help you expand your network up to 10km (6.21 miles).IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Contains 1 x 10/100/1000 Gigabit Ethernet (RJ-45) main Ethernet port (PoE-in) and 1 x secondary Ethernet port (PoE pass-through).Dedicated Wi-Fi radio for management.Comes with a 24V/0.5A Gigabit PoE adapter and a pole mount kit.Power source: Power over Ethernet (PoE).Operating frequency: U-NII-1 5150-5250MHz, U-NII-2A 5250-5350MHz, U-NII-2C 5470-5725MHz, U-NII-3 5725-5850MHz.Meets or exceeds the CE, FCC, IC, RoHS, IEC 68-2-11 (ASTM B117), MIL-STD-810 G Method 509.5, IEC 68-2-6, IEC 68-2-14, IEC 68-2-5 at 40 degrees Celsius (104 degrees Fahrenheit), ETS 300 019-1-4, ETS 300 019-1-4, MIL-STD-810 G Method 506.5 standards.Tight beamwidth RF energy technology blocks or spatially filters out noise, so noise immunity is improved.Operating system: airOS 8.Long-range point-to-point (PtP) link mode.Offers strong WPA2 security.UNMS app allows you to set up, configure, and manage the NanoBeam access point (downloaded from the App Store or Google Play).Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using predesignated time slots scheduled by an intelligent AP controller.Intelligent QoS: priority assigned to voice/video for seamless streaming.1 Year Warranty

Introducing the airMAX LiteAP AC, the high-performance access point from Ubiquiti Networks. Featuring an ultra-lightweight form factor, the LiteAP AC was designed to be an affordable cost/performance solution for long-distance, wireless broadband bridging. Operates in the worldwide, license-free 5GHz frequency range with high-performance speeds. The LiteAP AC combines proprietary hardware and software technologies to deliver its breakthrough combination of throughput and range with cost-effective value. The ball-joint mount provides adjustment flexibility for versatile mounting options. Minimal fasteners simplify installation. No tools are needed; only a single wrench is required for pole-mounting..This access point provides high-performance solution for long-distance, wireless broadband bridging.Dimensions: 17.81"H x 2.14"W x 3.1"D.IEEE 802.11ac network technology and data transfer rates of more than 450Mbps.Delivers up to 450Mbps real TCP/IP throughput and features an efficient form factor.Features a lightweight antenna with an integrated radio in a sleek design.Operates in the worldwide, license-free 5GHz frequency range.Networking interface: 10/100/1000 Ethernet port.Antenna gain: 16dBi.Power supply: 24V/0.5A Gigabit PoE adapter (included).Power method: passive PoE (pairs 4, 5+; 7, 8 return).The ball-joint mount provides adjustment flexibility for versatile mounting options.No tools are needed for installation; only a single wrench is required for pole-mounting.Operating temperature: -40 to 158 degrees Fahrenheit; operating humidity: 5 to 95% noncondensing.Meets or exceeds FCC and RoHS standards.1 Year Warranty

The NanoSwitch is an outdoor, four-port Gigabit switch with PoE pass-through. It is powered by 24V Passive PoE and provides up to 24W of power on three PoE out ports. The NanoSwitch is designed for outdoor deployment and supports up to 4Gbps total, non-blocking line rate..Unmanaged switch with four Gigabit Ethernet ports.One Gigabit 24V passive PoE in port and three Gigabit 24V passive PoE out ports.Total non-blocking line rate: 4Gbps.Dimensions: 7.73"H x 3.68"W x 1.28"D.Maximum power consumption: 30W.Certifications and standards: Meets or exceeds CE, FCC, IC standards.Featuring a durable, weatherproof form factor, switch is great for outdoor deployment; made of white polycarbonate.Can be easily mounted on a pole or wall.1-year manufacturer limited warranty

5 Gigabit PoE Ports.24V Configurable Passive PoE.EdgeSwitch XP Configuration Interface.Wall-Mountable

Ubiquiti introduces the airCube a cost-effective wireless access point for use in your customer deployments. It offers convenient PoE passthrough to power a 24V airMAX CPE device, so you can use a single PoE adapter to power this device. Management options feature a graphical user interface designed for streamlined setup and control. The Ubiquiti airCube can be installed and configured using the UNMS (Ubiquiti Network Management System) app on your mobile phone or tablet. Web UI enables a standalone utility for basic configuration..Home Wi-Fi access point for use in your customer deployments.Dimensions: 3.52"H x 3.46"W x 3.51"D.Designed to interoperate with airMAX CPEs.Comes in black and made of plastic.Features four 10/100 fast Ethernet ports.Wireless speeds of up to 300Mbps in the 2.4GHz radio band.Wi-Fi standard: 802.11n, 2x2 MIMO technology.Its attractive design means it can be positioned anywhere in the room, improving Wi-Fi performance.Innovative super antenna provides wide-area coverage beyond regular Wi-Fi access points.Use the intuitive UNMS mobile app for iOS and Android to install and configure the device.Can be powered by and provide power to airMAX CPE using 24V passive PoE or 5V power adapter with Micro-USB (not included).LED lights up when the device is powered on.Meets or exceeds FCC standard.1-year manufacturer limited warranty

The Ubiquiti Instant INS-3AF-O-G outdoor Gigabit PoE converter for 802.3af switches, transforms any Ubiquiti PoE devices into a fully compliant 802.3af compatible product. It works with 10/100/1000 Mbps ports to deliver high throughput speeds over a wired connection. This instant 802.3af adapter supports longer cable runs for more efficient power delivery. The device provides an additional +/-15 kV of Ethernet isolation for built-in protection or surge protection. It is compatible with airMAX and UniFi devices..Outdoor Gigabit PoE converter transforms passive PoE devices into 802.3af-compliant products.Dimensions: 14.4"D x 1.19"Dia. (with RJ45 cable).Compatibility: 802.3af switches for remote control power applications.Protection type: Surge protection.Interfaces/ports: 1 x Gigabit RJ45 port (PoE in), 1 x Gigabit RJ45 cable (PoE out).Network and communication: 10/100/1000Base-T.Power: 48 VDC input, 24 V, 0.5 A output.Form factor: External.Enables longer cable runs due to a more efficient power delivery.Provides an additional +/- 15 kV of Ethernet isolation to lessen the risk of ESD or surge damage to connected devices.Weight: 3.17 oz.

Industrial Gigabit PoE Splitter - 90W High Speed Power over Ethernet PoE+++ Splitter - 12-48V DC Splitter 802.3bt - LAN/RJ45 Ultra PoE to DC Adapter - -40C to +75C (POESLT1G48V).90W POE IEEE802.3bt: Supports IEEE 802.3af (PoE / Type 1), IEEE 802.3at (PoE+ / Type 2), IEEE 802.3bt (PoE++ / Type 3); power out configured w/ DIP switch for 12/16/24/48V DC (1.5A) via terminal block.HIGH POWER GIGABIT PoE SPLITTER: Power non-PoE devices using network infrastructure where power isn't available | Splits PoE connection (max 90W) into RJ45 data & DC power (terminal block).ROBUST DESIGN: Industrial Power over Ethernet Splitter w/MTBF of 600,000+ hrs. @ 50C | Vibration, shock & free fall rated | Rugged IP-30 aluminum housing | Hardened operating temp of -40C to 75C.STARTECH.COM ADVANTAGE: IT professionals' choice for over 30 years | This PoE Splitter is backed for 2-years by StarTech.com, including free 24/5 North America based multi-lingual tech support.TECH SPECS: High Speed 1 Gbps | 1 x RJ45 PoE In | 1 x RJ45 Data Out | 12V-48VDC 1.5A power output | 4 pin Terminal Block Power Out | 10/100/1000 Mbps Auto Negotiation | DIN or Wall Mountable.Rugged PoE Splitter | 12-48V DC | IP-30 Aluminum Housing | 1.5A Power Output